1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * GE SBC610 board support
4 *
5 * Author: Martyn Welch <martyn.welch@ge.com>
6 *
7 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
8 *
9 * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines)
10 * Copyright 2006 Freescale Semiconductor Inc.
11 *
12 * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c
13 */
14
15#include <linux/stddef.h>
16#include <linux/kernel.h>
17#include <linux/pci.h>
18#include <linux/kdev_t.h>
19#include <linux/delay.h>
20#include <linux/seq_file.h>
21#include <linux/of.h>
22#include <linux/of_address.h>
23
24#include <asm/time.h>
25#include <asm/machdep.h>
26#include <asm/pci-bridge.h>
27#include <mm/mmu_decl.h>
28#include <asm/udbg.h>
29
30#include <asm/mpic.h>
31#include <asm/nvram.h>
32
33#include <sysdev/fsl_pci.h>
34#include <sysdev/fsl_soc.h>
35#include <sysdev/ge/ge_pic.h>
36
37#include "mpc86xx.h"
38
39#undef DEBUG
40
41#ifdef DEBUG
42#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
43#else
44#define DBG (fmt...) do { } while (0)
45#endif
46
47void __iomem *sbc610_regs;
48
49static void __init gef_sbc610_init_irq(void)
50{
51	struct device_node *cascade_node = NULL;
52
53	mpc86xx_init_irq();
54
55	/*
56	 * There is a simple interrupt handler in the main FPGA, this needs
57	 * to be cascaded into the MPIC
58	 */
59	cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic");
60	if (!cascade_node) {
61		printk(KERN_WARNING "SBC610: No FPGA PIC\n");
62		return;
63	}
64
65	gef_pic_init(cascade_node);
66	of_node_put(cascade_node);
67}
68
69static void __init gef_sbc610_setup_arch(void)
70{
71	struct device_node *regs;
72
73	printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
74
75#ifdef CONFIG_SMP
76	mpc86xx_smp_init();
77#endif
78
79	fsl_pci_assign_primary();
80
81	/* Remap basic board registers */
82	regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs");
83	if (regs) {
84		sbc610_regs = of_iomap(regs, 0);
85		if (sbc610_regs == NULL)
86			printk(KERN_WARNING "Unable to map board registers\n");
87		of_node_put(regs);
88	}
89
90#if defined(CONFIG_MMIO_NVRAM)
91	mmio_nvram_init();
92#endif
93}
94
95/* Return the PCB revision */
96static unsigned int gef_sbc610_get_pcb_rev(void)
97{
98	unsigned int reg;
99
100	reg = ioread32(sbc610_regs);
101	return (reg >> 8) & 0xff;
102}
103
104/* Return the board (software) revision */
105static unsigned int gef_sbc610_get_board_rev(void)
106{
107	unsigned int reg;
108
109	reg = ioread32(sbc610_regs);
110	return (reg >> 16) & 0xff;
111}
112
113/* Return the FPGA revision */
114static unsigned int gef_sbc610_get_fpga_rev(void)
115{
116	unsigned int reg;
117
118	reg = ioread32(sbc610_regs);
119	return (reg >> 24) & 0xf;
120}
121
122static void gef_sbc610_show_cpuinfo(struct seq_file *m)
123{
124	uint svid = mfspr(SPRN_SVR);
125
126	seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
127
128	seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(),
129		('A' + gef_sbc610_get_board_rev() - 1));
130	seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev());
131
132	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
133}
134
135static void gef_sbc610_nec_fixup(struct pci_dev *pdev)
136{
137	unsigned int val;
138
139	/* Do not do the fixup on other platforms! */
140	if (!machine_is(gef_sbc610))
141		return;
142
143	printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
144
145	/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
146	pci_read_config_dword(pdev, 0xe0, &val);
147	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5);
148
149	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
150	pci_write_config_dword(pdev, 0xe4, 1 << 5);
151}
152DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
153	gef_sbc610_nec_fixup);
154
155machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices);
156
157define_machine(gef_sbc610) {
158	.name			= "GE SBC610",
159	.compatible		= "gef,sbc610",
160	.setup_arch		= gef_sbc610_setup_arch,
161	.init_IRQ		= gef_sbc610_init_irq,
162	.show_cpuinfo		= gef_sbc610_show_cpuinfo,
163	.get_irq		= mpic_get_irq,
164	.time_init		= mpc86xx_time_init,
165	.progress		= udbg_progress,
166#ifdef CONFIG_PCI
167	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
168#endif
169};
170