1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * PowerPC version 4 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 5 * 6 * Derived from "arch/i386/kernel/signal.c" 7 * Copyright (C) 1991, 1992 Linus Torvalds 8 * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson 9 */ 10 11#include <linux/sched.h> 12#include <linux/mm.h> 13#include <linux/smp.h> 14#include <linux/kernel.h> 15#include <linux/signal.h> 16#include <linux/errno.h> 17#include <linux/wait.h> 18#include <linux/unistd.h> 19#include <linux/stddef.h> 20#include <linux/elf.h> 21#include <linux/ptrace.h> 22#include <linux/ratelimit.h> 23#include <linux/syscalls.h> 24#include <linux/pagemap.h> 25 26#include <asm/sigcontext.h> 27#include <asm/ucontext.h> 28#include <linux/uaccess.h> 29#include <asm/unistd.h> 30#include <asm/cacheflush.h> 31#include <asm/syscalls.h> 32#include <asm/vdso.h> 33#include <asm/switch_to.h> 34#include <asm/tm.h> 35#include <asm/asm-prototypes.h> 36 37#include "signal.h" 38 39 40#define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs)) 41#define FP_REGS_SIZE sizeof(elf_fpregset_t) 42 43#define TRAMP_TRACEBACK 4 44#define TRAMP_SIZE 7 45 46/* 47 * When we have signals to deliver, we set up on the user stack, 48 * going down from the original stack pointer: 49 * 1) a rt_sigframe struct which contains the ucontext 50 * 2) a gap of __SIGNAL_FRAMESIZE bytes which acts as a dummy caller 51 * frame for the signal handler. 52 */ 53 54struct rt_sigframe { 55 /* sys_rt_sigreturn requires the ucontext be the first field */ 56 struct ucontext uc; 57#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 58 struct ucontext uc_transact; 59#endif 60 unsigned long _unused[2]; 61 unsigned int tramp[TRAMP_SIZE]; 62 struct siginfo __user *pinfo; 63 void __user *puc; 64 struct siginfo info; 65 /* New 64 bit little-endian ABI allows redzone of 512 bytes below sp */ 66 char abigap[USER_REDZONE_SIZE]; 67} __attribute__ ((aligned (16))); 68 69unsigned long get_min_sigframe_size_64(void) 70{ 71 return sizeof(struct rt_sigframe) + __SIGNAL_FRAMESIZE; 72} 73 74/* 75 * This computes a quad word aligned pointer inside the vmx_reserve array 76 * element. For historical reasons sigcontext might not be quad word aligned, 77 * but the location we write the VMX regs to must be. See the comment in 78 * sigcontext for more detail. 79 */ 80#ifdef CONFIG_ALTIVEC 81static elf_vrreg_t __user *sigcontext_vmx_regs(struct sigcontext __user *sc) 82{ 83 return (elf_vrreg_t __user *) (((unsigned long)sc->vmx_reserve + 15) & ~0xful); 84} 85#endif 86 87static void prepare_setup_sigcontext(struct task_struct *tsk) 88{ 89#ifdef CONFIG_ALTIVEC 90 /* save altivec registers */ 91 if (tsk->thread.used_vr) 92 flush_altivec_to_thread(tsk); 93 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 94 tsk->thread.vrsave = mfspr(SPRN_VRSAVE); 95#endif /* CONFIG_ALTIVEC */ 96 97 flush_fp_to_thread(tsk); 98 99#ifdef CONFIG_VSX 100 if (tsk->thread.used_vsr) 101 flush_vsx_to_thread(tsk); 102#endif /* CONFIG_VSX */ 103} 104 105/* 106 * Set up the sigcontext for the signal frame. 107 */ 108 109#define unsafe_setup_sigcontext(sc, tsk, signr, set, handler, ctx_has_vsx_region, label)\ 110do { \ 111 if (__unsafe_setup_sigcontext(sc, tsk, signr, set, handler, ctx_has_vsx_region))\ 112 goto label; \ 113} while (0) 114static long notrace __unsafe_setup_sigcontext(struct sigcontext __user *sc, 115 struct task_struct *tsk, int signr, sigset_t *set, 116 unsigned long handler, int ctx_has_vsx_region) 117{ 118 /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the 119 * process never used altivec yet (MSR_VEC is zero in pt_regs of 120 * the context). This is very important because we must ensure we 121 * don't lose the VRSAVE content that may have been set prior to 122 * the process doing its first vector operation 123 * Userland shall check AT_HWCAP to know whether it can rely on the 124 * v_regs pointer or not 125 */ 126#ifdef CONFIG_ALTIVEC 127 elf_vrreg_t __user *v_regs = sigcontext_vmx_regs(sc); 128#endif 129 struct pt_regs *regs = tsk->thread.regs; 130 unsigned long msr = regs->msr; 131 /* Force usr to always see softe as 1 (interrupts enabled) */ 132 unsigned long softe = 0x1; 133 134 BUG_ON(tsk != current); 135 136#ifdef CONFIG_ALTIVEC 137 unsafe_put_user(v_regs, &sc->v_regs, efault_out); 138 139 /* save altivec registers */ 140 if (tsk->thread.used_vr) { 141 /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ 142 unsafe_copy_to_user(v_regs, &tsk->thread.vr_state, 143 33 * sizeof(vector128), efault_out); 144 /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg) 145 * contains valid data. 146 */ 147 msr |= MSR_VEC; 148 } 149 /* We always copy to/from vrsave, it's 0 if we don't have or don't 150 * use altivec. 151 */ 152 unsafe_put_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33], efault_out); 153#else /* CONFIG_ALTIVEC */ 154 unsafe_put_user(0, &sc->v_regs, efault_out); 155#endif /* CONFIG_ALTIVEC */ 156 /* copy fpr regs and fpscr */ 157 unsafe_copy_fpr_to_user(&sc->fp_regs, tsk, efault_out); 158 159 /* 160 * Clear the MSR VSX bit to indicate there is no valid state attached 161 * to this context, except in the specific case below where we set it. 162 */ 163 msr &= ~MSR_VSX; 164#ifdef CONFIG_VSX 165 /* 166 * Copy VSX low doubleword to local buffer for formatting, 167 * then out to userspace. Update v_regs to point after the 168 * VMX data. 169 */ 170 if (tsk->thread.used_vsr && ctx_has_vsx_region) { 171 v_regs += ELF_NVRREG; 172 unsafe_copy_vsx_to_user(v_regs, tsk, efault_out); 173 /* set MSR_VSX in the MSR value in the frame to 174 * indicate that sc->vs_reg) contains valid data. 175 */ 176 msr |= MSR_VSX; 177 } 178#endif /* CONFIG_VSX */ 179 unsafe_put_user(&sc->gp_regs, &sc->regs, efault_out); 180 unsafe_copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE, efault_out); 181 unsafe_put_user(msr, &sc->gp_regs[PT_MSR], efault_out); 182 unsafe_put_user(softe, &sc->gp_regs[PT_SOFTE], efault_out); 183 unsafe_put_user(signr, &sc->signal, efault_out); 184 unsafe_put_user(handler, &sc->handler, efault_out); 185 if (set != NULL) 186 unsafe_put_user(set->sig[0], &sc->oldmask, efault_out); 187 188 return 0; 189 190efault_out: 191 return -EFAULT; 192} 193 194#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 195/* 196 * As above, but Transactional Memory is in use, so deliver sigcontexts 197 * containing checkpointed and transactional register states. 198 * 199 * To do this, we treclaim (done before entering here) to gather both sets of 200 * registers and set up the 'normal' sigcontext registers with rolled-back 201 * register values such that a simple signal handler sees a correct 202 * checkpointed register state. If interested, a TM-aware sighandler can 203 * examine the transactional registers in the 2nd sigcontext to determine the 204 * real origin of the signal. 205 */ 206static long setup_tm_sigcontexts(struct sigcontext __user *sc, 207 struct sigcontext __user *tm_sc, 208 struct task_struct *tsk, 209 int signr, sigset_t *set, unsigned long handler, 210 unsigned long msr) 211{ 212 /* When CONFIG_ALTIVEC is set, we _always_ setup v_regs even if the 213 * process never used altivec yet (MSR_VEC is zero in pt_regs of 214 * the context). This is very important because we must ensure we 215 * don't lose the VRSAVE content that may have been set prior to 216 * the process doing its first vector operation 217 * Userland shall check AT_HWCAP to know wether it can rely on the 218 * v_regs pointer or not. 219 */ 220#ifdef CONFIG_ALTIVEC 221 elf_vrreg_t __user *v_regs = sigcontext_vmx_regs(sc); 222 elf_vrreg_t __user *tm_v_regs = sigcontext_vmx_regs(tm_sc); 223#endif 224 struct pt_regs *regs = tsk->thread.regs; 225 long err = 0; 226 227 BUG_ON(tsk != current); 228 229 BUG_ON(!MSR_TM_ACTIVE(msr)); 230 231 WARN_ON(tm_suspend_disabled); 232 233 /* Restore checkpointed FP, VEC, and VSX bits from ckpt_regs as 234 * it contains the correct FP, VEC, VSX state after we treclaimed 235 * the transaction and giveup_all() was called on reclaiming. 236 */ 237 msr |= tsk->thread.ckpt_regs.msr & (MSR_FP | MSR_VEC | MSR_VSX); 238 239#ifdef CONFIG_ALTIVEC 240 err |= __put_user(v_regs, &sc->v_regs); 241 err |= __put_user(tm_v_regs, &tm_sc->v_regs); 242 243 /* save altivec registers */ 244 if (tsk->thread.used_vr) { 245 /* Copy 33 vec registers (vr0..31 and vscr) to the stack */ 246 err |= __copy_to_user(v_regs, &tsk->thread.ckvr_state, 247 33 * sizeof(vector128)); 248 /* If VEC was enabled there are transactional VRs valid too, 249 * else they're a copy of the checkpointed VRs. 250 */ 251 if (msr & MSR_VEC) 252 err |= __copy_to_user(tm_v_regs, 253 &tsk->thread.vr_state, 254 33 * sizeof(vector128)); 255 else 256 err |= __copy_to_user(tm_v_regs, 257 &tsk->thread.ckvr_state, 258 33 * sizeof(vector128)); 259 260 /* set MSR_VEC in the MSR value in the frame to indicate 261 * that sc->v_reg contains valid data. 262 */ 263 msr |= MSR_VEC; 264 } 265 /* We always copy to/from vrsave, it's 0 if we don't have or don't 266 * use altivec. 267 */ 268 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 269 tsk->thread.ckvrsave = mfspr(SPRN_VRSAVE); 270 err |= __put_user(tsk->thread.ckvrsave, (u32 __user *)&v_regs[33]); 271 if (msr & MSR_VEC) 272 err |= __put_user(tsk->thread.vrsave, 273 (u32 __user *)&tm_v_regs[33]); 274 else 275 err |= __put_user(tsk->thread.ckvrsave, 276 (u32 __user *)&tm_v_regs[33]); 277 278#else /* CONFIG_ALTIVEC */ 279 err |= __put_user(0, &sc->v_regs); 280 err |= __put_user(0, &tm_sc->v_regs); 281#endif /* CONFIG_ALTIVEC */ 282 283 /* copy fpr regs and fpscr */ 284 err |= copy_ckfpr_to_user(&sc->fp_regs, tsk); 285 if (msr & MSR_FP) 286 err |= copy_fpr_to_user(&tm_sc->fp_regs, tsk); 287 else 288 err |= copy_ckfpr_to_user(&tm_sc->fp_regs, tsk); 289 290#ifdef CONFIG_VSX 291 /* 292 * Copy VSX low doubleword to local buffer for formatting, 293 * then out to userspace. Update v_regs to point after the 294 * VMX data. 295 */ 296 if (tsk->thread.used_vsr) { 297 v_regs += ELF_NVRREG; 298 tm_v_regs += ELF_NVRREG; 299 300 err |= copy_ckvsx_to_user(v_regs, tsk); 301 302 if (msr & MSR_VSX) 303 err |= copy_vsx_to_user(tm_v_regs, tsk); 304 else 305 err |= copy_ckvsx_to_user(tm_v_regs, tsk); 306 307 /* set MSR_VSX in the MSR value in the frame to 308 * indicate that sc->vs_reg) contains valid data. 309 */ 310 msr |= MSR_VSX; 311 } 312#endif /* CONFIG_VSX */ 313 314 err |= __put_user(&sc->gp_regs, &sc->regs); 315 err |= __put_user(&tm_sc->gp_regs, &tm_sc->regs); 316 err |= __copy_to_user(&tm_sc->gp_regs, regs, GP_REGS_SIZE); 317 err |= __copy_to_user(&sc->gp_regs, 318 &tsk->thread.ckpt_regs, GP_REGS_SIZE); 319 err |= __put_user(msr, &tm_sc->gp_regs[PT_MSR]); 320 err |= __put_user(msr, &sc->gp_regs[PT_MSR]); 321 err |= __put_user(signr, &sc->signal); 322 err |= __put_user(handler, &sc->handler); 323 if (set != NULL) 324 err |= __put_user(set->sig[0], &sc->oldmask); 325 326 return err; 327} 328#endif 329 330/* 331 * Restore the sigcontext from the signal frame. 332 */ 333#define unsafe_restore_sigcontext(tsk, set, sig, sc, label) do { \ 334 if (__unsafe_restore_sigcontext(tsk, set, sig, sc)) \ 335 goto label; \ 336} while (0) 337static long notrace __unsafe_restore_sigcontext(struct task_struct *tsk, sigset_t *set, 338 int sig, struct sigcontext __user *sc) 339{ 340#ifdef CONFIG_ALTIVEC 341 elf_vrreg_t __user *v_regs; 342#endif 343 unsigned long save_r13 = 0; 344 unsigned long msr; 345 struct pt_regs *regs = tsk->thread.regs; 346#ifdef CONFIG_VSX 347 int i; 348#endif 349 350 BUG_ON(tsk != current); 351 352 /* If this is not a signal return, we preserve the TLS in r13 */ 353 if (!sig) 354 save_r13 = regs->gpr[13]; 355 356 /* copy the GPRs */ 357 unsafe_copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr), efault_out); 358 unsafe_get_user(regs->nip, &sc->gp_regs[PT_NIP], efault_out); 359 /* get MSR separately, transfer the LE bit if doing signal return */ 360 unsafe_get_user(msr, &sc->gp_regs[PT_MSR], efault_out); 361 if (sig) 362 regs_set_return_msr(regs, (regs->msr & ~MSR_LE) | (msr & MSR_LE)); 363 unsafe_get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3], efault_out); 364 unsafe_get_user(regs->ctr, &sc->gp_regs[PT_CTR], efault_out); 365 unsafe_get_user(regs->link, &sc->gp_regs[PT_LNK], efault_out); 366 unsafe_get_user(regs->xer, &sc->gp_regs[PT_XER], efault_out); 367 unsafe_get_user(regs->ccr, &sc->gp_regs[PT_CCR], efault_out); 368 /* Don't allow userspace to set SOFTE */ 369 set_trap_norestart(regs); 370 unsafe_get_user(regs->dar, &sc->gp_regs[PT_DAR], efault_out); 371 unsafe_get_user(regs->dsisr, &sc->gp_regs[PT_DSISR], efault_out); 372 unsafe_get_user(regs->result, &sc->gp_regs[PT_RESULT], efault_out); 373 374 if (!sig) 375 regs->gpr[13] = save_r13; 376 if (set != NULL) 377 unsafe_get_user(set->sig[0], &sc->oldmask, efault_out); 378 379 /* 380 * Force reload of FP/VEC/VSX so userspace sees any changes. 381 * Clear these bits from the user process' MSR before copying into the 382 * thread struct. If we are rescheduled or preempted and another task 383 * uses FP/VEC/VSX, and this process has the MSR bits set, then the 384 * context switch code will save the current CPU state into the 385 * thread_struct - possibly overwriting the data we are updating here. 386 */ 387 regs_set_return_msr(regs, regs->msr & ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX)); 388 389#ifdef CONFIG_ALTIVEC 390 unsafe_get_user(v_regs, &sc->v_regs, efault_out); 391 if (v_regs && !access_ok(v_regs, 34 * sizeof(vector128))) 392 return -EFAULT; 393 /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ 394 if (v_regs != NULL && (msr & MSR_VEC) != 0) { 395 unsafe_copy_from_user(&tsk->thread.vr_state, v_regs, 396 33 * sizeof(vector128), efault_out); 397 tsk->thread.used_vr = true; 398 } else if (tsk->thread.used_vr) { 399 memset(&tsk->thread.vr_state, 0, 33 * sizeof(vector128)); 400 } 401 /* Always get VRSAVE back */ 402 if (v_regs != NULL) 403 unsafe_get_user(tsk->thread.vrsave, (u32 __user *)&v_regs[33], efault_out); 404 else 405 tsk->thread.vrsave = 0; 406 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 407 mtspr(SPRN_VRSAVE, tsk->thread.vrsave); 408#endif /* CONFIG_ALTIVEC */ 409 /* restore floating point */ 410 unsafe_copy_fpr_from_user(tsk, &sc->fp_regs, efault_out); 411#ifdef CONFIG_VSX 412 /* 413 * Get additional VSX data. Update v_regs to point after the 414 * VMX data. Copy VSX low doubleword from userspace to local 415 * buffer for formatting, then into the taskstruct. 416 */ 417 v_regs += ELF_NVRREG; 418 if ((msr & MSR_VSX) != 0) { 419 unsafe_copy_vsx_from_user(tsk, v_regs, efault_out); 420 tsk->thread.used_vsr = true; 421 } else { 422 for (i = 0; i < 32 ; i++) 423 tsk->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; 424 } 425#endif 426 return 0; 427 428efault_out: 429 return -EFAULT; 430} 431 432#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 433/* 434 * Restore the two sigcontexts from the frame of a transactional processes. 435 */ 436 437static long restore_tm_sigcontexts(struct task_struct *tsk, 438 struct sigcontext __user *sc, 439 struct sigcontext __user *tm_sc) 440{ 441#ifdef CONFIG_ALTIVEC 442 elf_vrreg_t __user *v_regs, *tm_v_regs; 443#endif 444 unsigned long err = 0; 445 unsigned long msr; 446 struct pt_regs *regs = tsk->thread.regs; 447#ifdef CONFIG_VSX 448 int i; 449#endif 450 451 BUG_ON(tsk != current); 452 453 if (tm_suspend_disabled) 454 return -EINVAL; 455 456 /* copy the GPRs */ 457 err |= __copy_from_user(regs->gpr, tm_sc->gp_regs, sizeof(regs->gpr)); 458 err |= __copy_from_user(&tsk->thread.ckpt_regs, sc->gp_regs, 459 sizeof(regs->gpr)); 460 461 /* 462 * TFHAR is restored from the checkpointed 'wound-back' ucontext's NIP. 463 * TEXASR was set by the signal delivery reclaim, as was TFIAR. 464 * Users doing anything abhorrent like thread-switching w/ signals for 465 * TM-Suspended code will have to back TEXASR/TFIAR up themselves. 466 * For the case of getting a signal and simply returning from it, 467 * we don't need to re-copy them here. 468 */ 469 err |= __get_user(regs->nip, &tm_sc->gp_regs[PT_NIP]); 470 err |= __get_user(tsk->thread.tm_tfhar, &sc->gp_regs[PT_NIP]); 471 472 /* get MSR separately, transfer the LE bit if doing signal return */ 473 err |= __get_user(msr, &sc->gp_regs[PT_MSR]); 474 /* Don't allow reserved mode. */ 475 if (MSR_TM_RESV(msr)) 476 return -EINVAL; 477 478 /* pull in MSR LE from user context */ 479 regs_set_return_msr(regs, (regs->msr & ~MSR_LE) | (msr & MSR_LE)); 480 481 /* The following non-GPR non-FPR non-VR state is also checkpointed: */ 482 err |= __get_user(regs->ctr, &tm_sc->gp_regs[PT_CTR]); 483 err |= __get_user(regs->link, &tm_sc->gp_regs[PT_LNK]); 484 err |= __get_user(regs->xer, &tm_sc->gp_regs[PT_XER]); 485 err |= __get_user(regs->ccr, &tm_sc->gp_regs[PT_CCR]); 486 err |= __get_user(tsk->thread.ckpt_regs.ctr, 487 &sc->gp_regs[PT_CTR]); 488 err |= __get_user(tsk->thread.ckpt_regs.link, 489 &sc->gp_regs[PT_LNK]); 490 err |= __get_user(tsk->thread.ckpt_regs.xer, 491 &sc->gp_regs[PT_XER]); 492 err |= __get_user(tsk->thread.ckpt_regs.ccr, 493 &sc->gp_regs[PT_CCR]); 494 /* Don't allow userspace to set SOFTE */ 495 set_trap_norestart(regs); 496 /* These regs are not checkpointed; they can go in 'regs'. */ 497 err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]); 498 err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]); 499 err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]); 500 501 /* 502 * Force reload of FP/VEC. 503 * This has to be done before copying stuff into tsk->thread.fpr/vr 504 * for the reasons explained in the previous comment. 505 */ 506 regs_set_return_msr(regs, regs->msr & ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX)); 507 508#ifdef CONFIG_ALTIVEC 509 err |= __get_user(v_regs, &sc->v_regs); 510 err |= __get_user(tm_v_regs, &tm_sc->v_regs); 511 if (err) 512 return err; 513 if (v_regs && !access_ok(v_regs, 34 * sizeof(vector128))) 514 return -EFAULT; 515 if (tm_v_regs && !access_ok(tm_v_regs, 34 * sizeof(vector128))) 516 return -EFAULT; 517 /* Copy 33 vec registers (vr0..31 and vscr) from the stack */ 518 if (v_regs != NULL && tm_v_regs != NULL && (msr & MSR_VEC) != 0) { 519 err |= __copy_from_user(&tsk->thread.ckvr_state, v_regs, 520 33 * sizeof(vector128)); 521 err |= __copy_from_user(&tsk->thread.vr_state, tm_v_regs, 522 33 * sizeof(vector128)); 523 current->thread.used_vr = true; 524 } 525 else if (tsk->thread.used_vr) { 526 memset(&tsk->thread.vr_state, 0, 33 * sizeof(vector128)); 527 memset(&tsk->thread.ckvr_state, 0, 33 * sizeof(vector128)); 528 } 529 /* Always get VRSAVE back */ 530 if (v_regs != NULL && tm_v_regs != NULL) { 531 err |= __get_user(tsk->thread.ckvrsave, 532 (u32 __user *)&v_regs[33]); 533 err |= __get_user(tsk->thread.vrsave, 534 (u32 __user *)&tm_v_regs[33]); 535 } 536 else { 537 tsk->thread.vrsave = 0; 538 tsk->thread.ckvrsave = 0; 539 } 540 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 541 mtspr(SPRN_VRSAVE, tsk->thread.vrsave); 542#endif /* CONFIG_ALTIVEC */ 543 /* restore floating point */ 544 err |= copy_fpr_from_user(tsk, &tm_sc->fp_regs); 545 err |= copy_ckfpr_from_user(tsk, &sc->fp_regs); 546#ifdef CONFIG_VSX 547 /* 548 * Get additional VSX data. Update v_regs to point after the 549 * VMX data. Copy VSX low doubleword from userspace to local 550 * buffer for formatting, then into the taskstruct. 551 */ 552 if (v_regs && ((msr & MSR_VSX) != 0)) { 553 v_regs += ELF_NVRREG; 554 tm_v_regs += ELF_NVRREG; 555 err |= copy_vsx_from_user(tsk, tm_v_regs); 556 err |= copy_ckvsx_from_user(tsk, v_regs); 557 tsk->thread.used_vsr = true; 558 } else { 559 for (i = 0; i < 32 ; i++) { 560 tsk->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = 0; 561 tsk->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = 0; 562 } 563 } 564#endif 565 tm_enable(); 566 /* Make sure the transaction is marked as failed */ 567 tsk->thread.tm_texasr |= TEXASR_FS; 568 569 /* 570 * Disabling preemption, since it is unsafe to be preempted 571 * with MSR[TS] set without recheckpointing. 572 */ 573 preempt_disable(); 574 575 /* pull in MSR TS bits from user context */ 576 regs_set_return_msr(regs, regs->msr | (msr & MSR_TS_MASK)); 577 578 /* 579 * Ensure that TM is enabled in regs->msr before we leave the signal 580 * handler. It could be the case that (a) user disabled the TM bit 581 * through the manipulation of the MSR bits in uc_mcontext or (b) the 582 * TM bit was disabled because a sufficient number of context switches 583 * happened whilst in the signal handler and load_tm overflowed, 584 * disabling the TM bit. In either case we can end up with an illegal 585 * TM state leading to a TM Bad Thing when we return to userspace. 586 * 587 * CAUTION: 588 * After regs->MSR[TS] being updated, make sure that get_user(), 589 * put_user() or similar functions are *not* called. These 590 * functions can generate page faults which will cause the process 591 * to be de-scheduled with MSR[TS] set but without calling 592 * tm_recheckpoint(). This can cause a bug. 593 */ 594 regs_set_return_msr(regs, regs->msr | MSR_TM); 595 596 /* This loads the checkpointed FP/VEC state, if used */ 597 tm_recheckpoint(&tsk->thread); 598 599 msr_check_and_set(msr & (MSR_FP | MSR_VEC)); 600 if (msr & MSR_FP) { 601 load_fp_state(&tsk->thread.fp_state); 602 regs_set_return_msr(regs, regs->msr | (MSR_FP | tsk->thread.fpexc_mode)); 603 } 604 if (msr & MSR_VEC) { 605 load_vr_state(&tsk->thread.vr_state); 606 regs_set_return_msr(regs, regs->msr | MSR_VEC); 607 } 608 609 preempt_enable(); 610 611 return err; 612} 613#else /* !CONFIG_PPC_TRANSACTIONAL_MEM */ 614static long restore_tm_sigcontexts(struct task_struct *tsk, struct sigcontext __user *sc, 615 struct sigcontext __user *tm_sc) 616{ 617 return -EINVAL; 618} 619#endif 620 621/* 622 * Setup the trampoline code on the stack 623 */ 624static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp) 625{ 626 int i; 627 long err = 0; 628 629 /* Call the handler and pop the dummy stackframe*/ 630 err |= __put_user(PPC_RAW_BCTRL(), &tramp[0]); 631 err |= __put_user(PPC_RAW_ADDI(_R1, _R1, __SIGNAL_FRAMESIZE), &tramp[1]); 632 633 err |= __put_user(PPC_RAW_LI(_R0, syscall), &tramp[2]); 634 err |= __put_user(PPC_RAW_SC(), &tramp[3]); 635 636 /* Minimal traceback info */ 637 for (i=TRAMP_TRACEBACK; i < TRAMP_SIZE ;i++) 638 err |= __put_user(0, &tramp[i]); 639 640 if (!err) 641 flush_icache_range((unsigned long) &tramp[0], 642 (unsigned long) &tramp[TRAMP_SIZE]); 643 644 return err; 645} 646 647/* 648 * Userspace code may pass a ucontext which doesn't include VSX added 649 * at the end. We need to check for this case. 650 */ 651#define UCONTEXTSIZEWITHOUTVSX \ 652 (sizeof(struct ucontext) - 32*sizeof(long)) 653 654/* 655 * Handle {get,set,swap}_context operations 656 */ 657SYSCALL_DEFINE3(swapcontext, struct ucontext __user *, old_ctx, 658 struct ucontext __user *, new_ctx, long, ctx_size) 659{ 660 sigset_t set; 661 unsigned long new_msr = 0; 662 int ctx_has_vsx_region = 0; 663 664 if (new_ctx && 665 get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR])) 666 return -EFAULT; 667 /* 668 * Check that the context is not smaller than the original 669 * size (with VMX but without VSX) 670 */ 671 if (ctx_size < UCONTEXTSIZEWITHOUTVSX) 672 return -EINVAL; 673 /* 674 * If the new context state sets the MSR VSX bits but 675 * it doesn't provide VSX state. 676 */ 677 if ((ctx_size < sizeof(struct ucontext)) && 678 (new_msr & MSR_VSX)) 679 return -EINVAL; 680 /* Does the context have enough room to store VSX data? */ 681 if (ctx_size >= sizeof(struct ucontext)) 682 ctx_has_vsx_region = 1; 683 684 if (old_ctx != NULL) { 685 prepare_setup_sigcontext(current); 686 if (!user_write_access_begin(old_ctx, ctx_size)) 687 return -EFAULT; 688 689 unsafe_setup_sigcontext(&old_ctx->uc_mcontext, current, 0, NULL, 690 0, ctx_has_vsx_region, efault_out); 691 unsafe_copy_to_user(&old_ctx->uc_sigmask, ¤t->blocked, 692 sizeof(sigset_t), efault_out); 693 694 user_write_access_end(); 695 } 696 if (new_ctx == NULL) 697 return 0; 698 if (!access_ok(new_ctx, ctx_size) || 699 fault_in_readable((char __user *)new_ctx, ctx_size)) 700 return -EFAULT; 701 702 /* 703 * If we get a fault copying the context into the kernel's 704 * image of the user's registers, we can't just return -EFAULT 705 * because the user's registers will be corrupted. For instance 706 * the NIP value may have been updated but not some of the 707 * other registers. Given that we have done the access_ok 708 * and successfully read the first and last bytes of the region 709 * above, this should only happen in an out-of-memory situation 710 * or if another thread unmaps the region containing the context. 711 * We kill the task with a SIGSEGV in this situation. 712 */ 713 714 if (__get_user_sigset(&set, &new_ctx->uc_sigmask)) { 715 force_exit_sig(SIGSEGV); 716 return -EFAULT; 717 } 718 set_current_blocked(&set); 719 720 if (!user_read_access_begin(new_ctx, ctx_size)) 721 return -EFAULT; 722 if (__unsafe_restore_sigcontext(current, NULL, 0, &new_ctx->uc_mcontext)) { 723 user_read_access_end(); 724 force_exit_sig(SIGSEGV); 725 return -EFAULT; 726 } 727 user_read_access_end(); 728 729 /* This returns like rt_sigreturn */ 730 set_thread_flag(TIF_RESTOREALL); 731 732 return 0; 733 734efault_out: 735 user_write_access_end(); 736 return -EFAULT; 737} 738 739 740/* 741 * Do a signal return; undo the signal stack. 742 */ 743 744SYSCALL_DEFINE0(rt_sigreturn) 745{ 746 struct pt_regs *regs = current_pt_regs(); 747 struct ucontext __user *uc = (struct ucontext __user *)regs->gpr[1]; 748 sigset_t set; 749 unsigned long msr; 750 751 /* Always make any pending restarted system calls return -EINTR */ 752 current->restart_block.fn = do_no_restart_syscall; 753 754 if (!access_ok(uc, sizeof(*uc))) 755 goto badframe; 756 757 if (__get_user_sigset(&set, &uc->uc_sigmask)) 758 goto badframe; 759 set_current_blocked(&set); 760 761 if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM)) { 762 /* 763 * If there is a transactional state then throw it away. 764 * The purpose of a sigreturn is to destroy all traces of the 765 * signal frame, this includes any transactional state created 766 * within in. We only check for suspended as we can never be 767 * active in the kernel, we are active, there is nothing better to 768 * do than go ahead and Bad Thing later. 769 * The cause is not important as there will never be a 770 * recheckpoint so it's not user visible. 771 */ 772 if (MSR_TM_SUSPENDED(mfmsr())) 773 tm_reclaim_current(0); 774 775 /* 776 * Disable MSR[TS] bit also, so, if there is an exception in the 777 * code below (as a page fault in copy_ckvsx_to_user()), it does 778 * not recheckpoint this task if there was a context switch inside 779 * the exception. 780 * 781 * A major page fault can indirectly call schedule(). A reschedule 782 * process in the middle of an exception can have a side effect 783 * (Changing the CPU MSR[TS] state), since schedule() is called 784 * with the CPU MSR[TS] disable and returns with MSR[TS]=Suspended 785 * (switch_to() calls tm_recheckpoint() for the 'new' process). In 786 * this case, the process continues to be the same in the CPU, but 787 * the CPU state just changed. 788 * 789 * This can cause a TM Bad Thing, since the MSR in the stack will 790 * have the MSR[TS]=0, and this is what will be used to RFID. 791 * 792 * Clearing MSR[TS] state here will avoid a recheckpoint if there 793 * is any process reschedule in kernel space. The MSR[TS] state 794 * does not need to be saved also, since it will be replaced with 795 * the MSR[TS] that came from user context later, at 796 * restore_tm_sigcontexts. 797 */ 798 regs_set_return_msr(regs, regs->msr & ~MSR_TS_MASK); 799 800 if (__get_user(msr, &uc->uc_mcontext.gp_regs[PT_MSR])) 801 goto badframe; 802 } 803 804 if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) && MSR_TM_ACTIVE(msr)) { 805 /* We recheckpoint on return. */ 806 struct ucontext __user *uc_transact; 807 808 /* Trying to start TM on non TM system */ 809 if (!cpu_has_feature(CPU_FTR_TM)) 810 goto badframe; 811 812 if (__get_user(uc_transact, &uc->uc_link)) 813 goto badframe; 814 if (restore_tm_sigcontexts(current, &uc->uc_mcontext, 815 &uc_transact->uc_mcontext)) 816 goto badframe; 817 } else { 818 /* 819 * Fall through, for non-TM restore 820 * 821 * Unset MSR[TS] on the thread regs since MSR from user 822 * context does not have MSR active, and recheckpoint was 823 * not called since restore_tm_sigcontexts() was not called 824 * also. 825 * 826 * If not unsetting it, the code can RFID to userspace with 827 * MSR[TS] set, but without CPU in the proper state, 828 * causing a TM bad thing. 829 */ 830 regs_set_return_msr(current->thread.regs, 831 current->thread.regs->msr & ~MSR_TS_MASK); 832 if (!user_read_access_begin(&uc->uc_mcontext, sizeof(uc->uc_mcontext))) 833 goto badframe; 834 835 unsafe_restore_sigcontext(current, NULL, 1, &uc->uc_mcontext, 836 badframe_block); 837 838 user_read_access_end(); 839 } 840 841 if (restore_altstack(&uc->uc_stack)) 842 goto badframe; 843 844 set_thread_flag(TIF_RESTOREALL); 845 846 return 0; 847 848badframe_block: 849 user_read_access_end(); 850badframe: 851 signal_fault(current, regs, "rt_sigreturn", uc); 852 853 force_sig(SIGSEGV); 854 return 0; 855} 856 857int handle_rt_signal64(struct ksignal *ksig, sigset_t *set, 858 struct task_struct *tsk) 859{ 860 struct rt_sigframe __user *frame; 861 unsigned long newsp = 0; 862 long err = 0; 863 struct pt_regs *regs = tsk->thread.regs; 864 /* Save the thread's msr before get_tm_stackpointer() changes it */ 865 unsigned long msr = regs->msr; 866 867 frame = get_sigframe(ksig, tsk, sizeof(*frame), 0); 868 869 /* 870 * This only applies when calling unsafe_setup_sigcontext() and must be 871 * called before opening the uaccess window. 872 */ 873 if (!MSR_TM_ACTIVE(msr)) 874 prepare_setup_sigcontext(tsk); 875 876 if (!user_write_access_begin(frame, sizeof(*frame))) 877 goto badframe; 878 879 unsafe_put_user(&frame->info, &frame->pinfo, badframe_block); 880 unsafe_put_user(&frame->uc, &frame->puc, badframe_block); 881 882 /* Create the ucontext. */ 883 unsafe_put_user(0, &frame->uc.uc_flags, badframe_block); 884 unsafe_save_altstack(&frame->uc.uc_stack, regs->gpr[1], badframe_block); 885 886 if (MSR_TM_ACTIVE(msr)) { 887#ifdef CONFIG_PPC_TRANSACTIONAL_MEM 888 /* The ucontext_t passed to userland points to the second 889 * ucontext_t (for transactional state) with its uc_link ptr. 890 */ 891 unsafe_put_user(&frame->uc_transact, &frame->uc.uc_link, badframe_block); 892 893 user_write_access_end(); 894 895 err |= setup_tm_sigcontexts(&frame->uc.uc_mcontext, 896 &frame->uc_transact.uc_mcontext, 897 tsk, ksig->sig, NULL, 898 (unsigned long)ksig->ka.sa.sa_handler, 899 msr); 900 901 if (!user_write_access_begin(&frame->uc.uc_sigmask, 902 sizeof(frame->uc.uc_sigmask))) 903 goto badframe; 904 905#endif 906 } else { 907 unsafe_put_user(0, &frame->uc.uc_link, badframe_block); 908 unsafe_setup_sigcontext(&frame->uc.uc_mcontext, tsk, ksig->sig, 909 NULL, (unsigned long)ksig->ka.sa.sa_handler, 910 1, badframe_block); 911 } 912 913 unsafe_copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set), badframe_block); 914 user_write_access_end(); 915 916 /* Save the siginfo outside of the unsafe block. */ 917 if (copy_siginfo_to_user(&frame->info, &ksig->info)) 918 goto badframe; 919 920 /* Make sure signal handler doesn't get spurious FP exceptions */ 921 tsk->thread.fp_state.fpscr = 0; 922 923 /* Set up to return from userspace. */ 924 if (tsk->mm->context.vdso) { 925 regs_set_return_ip(regs, VDSO64_SYMBOL(tsk->mm->context.vdso, sigtramp_rt64)); 926 } else { 927 err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]); 928 if (err) 929 goto badframe; 930 regs_set_return_ip(regs, (unsigned long) &frame->tramp[0]); 931 } 932 933 /* Allocate a dummy caller frame for the signal handler. */ 934 newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE; 935 err |= put_user(regs->gpr[1], (unsigned long __user *)newsp); 936 937 /* Set up "regs" so we "return" to the signal handler. */ 938 if (is_elf2_task()) { 939 regs->ctr = (unsigned long) ksig->ka.sa.sa_handler; 940 regs->gpr[12] = regs->ctr; 941 } else { 942 /* Handler is *really* a pointer to the function descriptor for 943 * the signal routine. The first entry in the function 944 * descriptor is the entry address of signal and the second 945 * entry is the TOC value we need to use. 946 */ 947 struct func_desc __user *ptr = 948 (struct func_desc __user *)ksig->ka.sa.sa_handler; 949 950 err |= get_user(regs->ctr, &ptr->addr); 951 err |= get_user(regs->gpr[2], &ptr->toc); 952 } 953 954 /* enter the signal handler in native-endian mode */ 955 regs_set_return_msr(regs, (regs->msr & ~MSR_LE) | (MSR_KERNEL & MSR_LE)); 956 regs->gpr[1] = newsp; 957 regs->gpr[3] = ksig->sig; 958 regs->result = 0; 959 if (ksig->ka.sa.sa_flags & SA_SIGINFO) { 960 regs->gpr[4] = (unsigned long)&frame->info; 961 regs->gpr[5] = (unsigned long)&frame->uc; 962 regs->gpr[6] = (unsigned long) frame; 963 } else { 964 regs->gpr[4] = (unsigned long)&frame->uc.uc_mcontext; 965 } 966 if (err) 967 goto badframe; 968 969 return 0; 970 971badframe_block: 972 user_write_access_end(); 973badframe: 974 signal_fault(current, regs, "handle_rt_signal64", frame); 975 976 return 1; 977} 978