1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * Definitions for use by exception code on Book3-E 4 * 5 * Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. 6 */ 7#ifndef _ASM_POWERPC_EXCEPTION_64E_H 8#define _ASM_POWERPC_EXCEPTION_64E_H 9 10/* 11 * SPRGs usage an other considerations... 12 * 13 * Since TLB miss and other standard exceptions can be interrupted by 14 * critical exceptions which can themselves be interrupted by machine 15 * checks, and since the two later can themselves cause a TLB miss when 16 * hitting the linear mapping for the kernel stacks, we need to be a bit 17 * creative on how we use SPRGs. 18 * 19 * The base idea is that we have one SRPG reserved for critical and one 20 * for machine check interrupts. Those are used to save a GPR that can 21 * then be used to get the PACA, and store as much context as we need 22 * to save in there. That includes saving the SPRGs used by the TLB miss 23 * handler for linear mapping misses and the associated SRR0/1 due to 24 * the above re-entrancy issue. 25 * 26 * So here's the current usage pattern. It's done regardless of which 27 * SPRGs are user-readable though, thus we might have to change some of 28 * this later. In order to do that more easily, we use special constants 29 * for naming them 30 * 31 * WARNING: Some of these SPRGs are user readable. We need to do something 32 * about it as some point by making sure they can't be used to leak kernel 33 * critical data 34 */ 35 36#define PACA_EXGDBELL PACA_EXGEN 37 38/* We are out of SPRGs so we save some things in the PACA. The normal 39 * exception frame is smaller than the CRIT or MC one though 40 */ 41#define EX_R1 (0 * 8) 42#define EX_CR (1 * 8) 43#define EX_R10 (2 * 8) 44#define EX_R11 (3 * 8) 45#define EX_R14 (4 * 8) 46#define EX_R15 (5 * 8) 47 48/* 49 * The TLB miss exception uses different slots. 50 * 51 * The bolted variant uses only the first six fields, 52 * which in combination with pgd and kernel_pgd fits in 53 * one 64-byte cache line. 54 */ 55 56#define EX_TLB_R10 ( 0 * 8) 57#define EX_TLB_R11 ( 1 * 8) 58#define EX_TLB_R14 ( 2 * 8) 59#define EX_TLB_R15 ( 3 * 8) 60#define EX_TLB_R16 ( 4 * 8) 61#define EX_TLB_CR ( 5 * 8) 62#define EX_TLB_R12 ( 6 * 8) 63#define EX_TLB_R13 ( 7 * 8) 64#define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */ 65#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */ 66#define EX_TLB_SRR0 (10 * 8) 67#define EX_TLB_SRR1 (11 * 8) 68#define EX_TLB_R7 (12 * 8) 69#define EX_TLB_SIZE (13 * 8) 70 71#define START_EXCEPTION(label) \ 72 .globl exc_##label##_book3e; \ 73exc_##label##_book3e: 74 75/* TLB miss exception prolog 76 * 77 * This prolog handles re-entrancy (up to 3 levels supported in the PACA 78 * though we currently don't test for overflow). It provides you with a 79 * re-entrancy safe working space of r10...r16 and CR with r12 being used 80 * as the exception area pointer in the PACA for that level of re-entrancy 81 * and r13 containing the PACA pointer. 82 * 83 * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply 84 * as-is for instruction exceptions. It's up to the actual exception code 85 * to save them as well if required. 86 */ 87#define TLB_MISS_PROLOG \ 88 mtspr SPRN_SPRG_TLB_SCRATCH,r12; \ 89 mfspr r12,SPRN_SPRG_TLB_EXFRAME; \ 90 std r10,EX_TLB_R10(r12); \ 91 mfcr r10; \ 92 std r11,EX_TLB_R11(r12); \ 93 mfspr r11,SPRN_SPRG_TLB_SCRATCH; \ 94 std r13,EX_TLB_R13(r12); \ 95 mfspr r13,SPRN_SPRG_PACA; \ 96 std r14,EX_TLB_R14(r12); \ 97 addi r14,r12,EX_TLB_SIZE; \ 98 std r15,EX_TLB_R15(r12); \ 99 mfspr r15,SPRN_SRR1; \ 100 std r16,EX_TLB_R16(r12); \ 101 mfspr r16,SPRN_SRR0; \ 102 std r10,EX_TLB_CR(r12); \ 103 std r11,EX_TLB_R12(r12); \ 104 mtspr SPRN_SPRG_TLB_EXFRAME,r14; \ 105 std r15,EX_TLB_SRR1(r12); \ 106 std r16,EX_TLB_SRR0(r12); 107 108/* And these are the matching epilogs that restores things 109 * 110 * There are 3 epilogs: 111 * 112 * - SUCCESS : Unwinds one level 113 * - ERROR : restore from level 0 and reset 114 * - ERROR_SPECIAL : restore from current level and reset 115 * 116 * Normal errors use ERROR, that is, they restore the initial fault context 117 * and trigger a fault. However, there is a special case for linear mapping 118 * errors. Those should basically never happen, but if they do happen, we 119 * want the error to point out the context that did that linear mapping 120 * fault, not the initial level 0 (basically, we got a bogus PGF or something 121 * like that). For userland errors on the linear mapping, there is no 122 * difference since those are always level 0 anyway 123 */ 124 125#define TLB_MISS_RESTORE(freg) \ 126 ld r14,EX_TLB_CR(r12); \ 127 ld r10,EX_TLB_R10(r12); \ 128 ld r15,EX_TLB_SRR0(r12); \ 129 ld r16,EX_TLB_SRR1(r12); \ 130 mtspr SPRN_SPRG_TLB_EXFRAME,freg; \ 131 ld r11,EX_TLB_R11(r12); \ 132 mtcr r14; \ 133 ld r13,EX_TLB_R13(r12); \ 134 ld r14,EX_TLB_R14(r12); \ 135 mtspr SPRN_SRR0,r15; \ 136 ld r15,EX_TLB_R15(r12); \ 137 mtspr SPRN_SRR1,r16; \ 138 ld r16,EX_TLB_R16(r12); \ 139 ld r12,EX_TLB_R12(r12); \ 140 141#define TLB_MISS_EPILOG_SUCCESS \ 142 TLB_MISS_RESTORE(r12) 143 144#define TLB_MISS_EPILOG_ERROR \ 145 addi r12,r13,PACA_EXTLB; \ 146 TLB_MISS_RESTORE(r12) 147 148#define TLB_MISS_EPILOG_ERROR_SPECIAL \ 149 addi r11,r13,PACA_EXTLB; \ 150 TLB_MISS_RESTORE(r11) 151 152#ifndef __ASSEMBLY__ 153extern unsigned int interrupt_base_book3e; 154#endif 155 156#define SET_IVOR(vector_number, vector_offset) \ 157 LOAD_REG_ADDR(r3,interrupt_base_book3e);\ 158 ori r3,r3,vector_offset@l; \ 159 mtspr SPRN_IVOR##vector_number,r3; 160/* 161 * powerpc relies on return from interrupt/syscall being context synchronising 162 * (which rfi is) to support ARCH_HAS_MEMBARRIER_SYNC_CORE without additional 163 * synchronisation instructions. 164 */ 165#define RFI_TO_KERNEL \ 166 rfi 167 168#define RFI_TO_USER \ 169 rfi 170 171#endif /* _ASM_POWERPC_EXCEPTION_64E_H */ 172 173