1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * MPC8xx Communication Processor Module. 4 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) 5 * 6 * This file contains structures and information for the communication 7 * processor channels. Some CPM control and status is available 8 * through the MPC8xx internal memory map. See immap.h for details. 9 * This file only contains what I need for the moment, not the total 10 * CPM capabilities. I (or someone else) will add definitions as they 11 * are needed. -- Dan 12 * 13 * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 14 * bytes of the DP RAM and relocates the I2C parameter area to the 15 * IDMA1 space. The remaining DP RAM is available for buffer descriptors 16 * or other use. 17 */ 18#ifndef __CPM1__ 19#define __CPM1__ 20 21#include <linux/init.h> 22#include <asm/8xx_immap.h> 23#include <asm/ptrace.h> 24#include <asm/cpm.h> 25 26/* CPM Command register. 27*/ 28#define CPM_CR_RST ((ushort)0x8000) 29#define CPM_CR_OPCODE ((ushort)0x0f00) 30#define CPM_CR_CHAN ((ushort)0x00f0) 31#define CPM_CR_FLG ((ushort)0x0001) 32 33/* Channel numbers. 34*/ 35#define CPM_CR_CH_SCC1 ((ushort)0x0000) 36#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ 37#define CPM_CR_CH_SCC2 ((ushort)0x0004) 38#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ 39#define CPM_CR_CH_TIMER CPM_CR_CH_SPI 40#define CPM_CR_CH_SCC3 ((ushort)0x0008) 41#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ 42#define CPM_CR_CH_SCC4 ((ushort)0x000c) 43#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ 44 45#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) 46 47/* Export the base address of the communication processor registers 48 * and dual port ram. 49 */ 50extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ 51 52extern void cpm_setbrg(uint brg, uint rate); 53 54extern void __init cpm_load_patch(cpm8xx_t *cp); 55 56extern void cpm_reset(void); 57 58/* Parameter RAM offsets. 59*/ 60#define PROFF_SCC1 ((uint)0x0000) 61#define PROFF_IIC ((uint)0x0080) 62#define PROFF_SCC2 ((uint)0x0100) 63#define PROFF_SPI ((uint)0x0180) 64#define PROFF_SCC3 ((uint)0x0200) 65#define PROFF_SMC1 ((uint)0x0280) 66#define PROFF_DSP1 ((uint)0x02c0) 67#define PROFF_SCC4 ((uint)0x0300) 68#define PROFF_SMC2 ((uint)0x0380) 69 70/* Define enough so I can at least use the serial port as a UART. 71 * The MBX uses SMC1 as the host serial port. 72 */ 73typedef struct smc_uart { 74 ushort smc_rbase; /* Rx Buffer descriptor base address */ 75 ushort smc_tbase; /* Tx Buffer descriptor base address */ 76 u_char smc_rfcr; /* Rx function code */ 77 u_char smc_tfcr; /* Tx function code */ 78 ushort smc_mrblr; /* Max receive buffer length */ 79 uint smc_rstate; /* Internal */ 80 uint smc_idp; /* Internal */ 81 ushort smc_rbptr; /* Internal */ 82 ushort smc_ibc; /* Internal */ 83 uint smc_rxtmp; /* Internal */ 84 uint smc_tstate; /* Internal */ 85 uint smc_tdp; /* Internal */ 86 ushort smc_tbptr; /* Internal */ 87 ushort smc_tbc; /* Internal */ 88 uint smc_txtmp; /* Internal */ 89 ushort smc_maxidl; /* Maximum idle characters */ 90 ushort smc_tmpidl; /* Temporary idle counter */ 91 ushort smc_brklen; /* Last received break length */ 92 ushort smc_brkec; /* rcv'd break condition counter */ 93 ushort smc_brkcr; /* xmt break count register */ 94 ushort smc_rmask; /* Temporary bit mask */ 95 char res1[8]; /* Reserved */ 96 ushort smc_rpbase; /* Relocation pointer */ 97} smc_uart_t; 98 99/* Function code bits. 100*/ 101#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ 102 103/* SMC uart mode register. 104*/ 105#define SMCMR_REN ((ushort)0x0001) 106#define SMCMR_TEN ((ushort)0x0002) 107#define SMCMR_DM ((ushort)0x000c) 108#define SMCMR_SM_GCI ((ushort)0x0000) 109#define SMCMR_SM_UART ((ushort)0x0020) 110#define SMCMR_SM_TRANS ((ushort)0x0030) 111#define SMCMR_SM_MASK ((ushort)0x0030) 112#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ 113#define SMCMR_REVD SMCMR_PM_EVEN 114#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ 115#define SMCMR_BS SMCMR_PEN 116#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ 117#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ 118#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) 119 120/* SMC2 as Centronics parallel printer. It is half duplex, in that 121 * it can only receive or transmit. The parameter ram values for 122 * each direction are either unique or properly overlap, so we can 123 * include them in one structure. 124 */ 125typedef struct smc_centronics { 126 ushort scent_rbase; 127 ushort scent_tbase; 128 u_char scent_cfcr; 129 u_char scent_smask; 130 ushort scent_mrblr; 131 uint scent_rstate; 132 uint scent_r_ptr; 133 ushort scent_rbptr; 134 ushort scent_r_cnt; 135 uint scent_rtemp; 136 uint scent_tstate; 137 uint scent_t_ptr; 138 ushort scent_tbptr; 139 ushort scent_t_cnt; 140 uint scent_ttemp; 141 ushort scent_max_sl; 142 ushort scent_sl_cnt; 143 ushort scent_character1; 144 ushort scent_character2; 145 ushort scent_character3; 146 ushort scent_character4; 147 ushort scent_character5; 148 ushort scent_character6; 149 ushort scent_character7; 150 ushort scent_character8; 151 ushort scent_rccm; 152 ushort scent_rccr; 153} smc_cent_t; 154 155/* Centronics Status Mask Register. 156*/ 157#define SMC_CENT_F ((u_char)0x08) 158#define SMC_CENT_PE ((u_char)0x04) 159#define SMC_CENT_S ((u_char)0x02) 160 161/* SMC Event and Mask register. 162*/ 163#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ 164#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ 165#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ 166#define SMCM_BSY ((unsigned char)0x04) 167#define SMCM_TX ((unsigned char)0x02) 168#define SMCM_RX ((unsigned char)0x01) 169 170/* Baud rate generators. 171*/ 172#define CPM_BRG_RST ((uint)0x00020000) 173#define CPM_BRG_EN ((uint)0x00010000) 174#define CPM_BRG_EXTC_INT ((uint)0x00000000) 175#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) 176#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) 177#define CPM_BRG_ATB ((uint)0x00002000) 178#define CPM_BRG_CD_MASK ((uint)0x00001ffe) 179#define CPM_BRG_DIV16 ((uint)0x00000001) 180 181/* SI Clock Route Register 182*/ 183#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) 184#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) 185#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) 186#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) 187#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) 188#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) 189#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) 190#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) 191 192/* SCCs. 193*/ 194#define SCC_GSMRH_IRP ((uint)0x00040000) 195#define SCC_GSMRH_GDE ((uint)0x00010000) 196#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) 197#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) 198#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) 199#define SCC_GSMRH_REVD ((uint)0x00002000) 200#define SCC_GSMRH_TRX ((uint)0x00001000) 201#define SCC_GSMRH_TTX ((uint)0x00000800) 202#define SCC_GSMRH_CDP ((uint)0x00000400) 203#define SCC_GSMRH_CTSP ((uint)0x00000200) 204#define SCC_GSMRH_CDS ((uint)0x00000100) 205#define SCC_GSMRH_CTSS ((uint)0x00000080) 206#define SCC_GSMRH_TFL ((uint)0x00000040) 207#define SCC_GSMRH_RFW ((uint)0x00000020) 208#define SCC_GSMRH_TXSY ((uint)0x00000010) 209#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) 210#define SCC_GSMRH_SYNL8 ((uint)0x00000008) 211#define SCC_GSMRH_SYNL4 ((uint)0x00000004) 212#define SCC_GSMRH_RTSM ((uint)0x00000002) 213#define SCC_GSMRH_RSYN ((uint)0x00000001) 214 215#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ 216#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) 217#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) 218#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) 219#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) 220#define SCC_GSMRL_TCI ((uint)0x10000000) 221#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) 222#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) 223#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) 224#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) 225#define SCC_GSMRL_RINV ((uint)0x02000000) 226#define SCC_GSMRL_TINV ((uint)0x01000000) 227#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) 228#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) 229#define SCC_GSMRL_TPL_48 ((uint)0x00800000) 230#define SCC_GSMRL_TPL_32 ((uint)0x00600000) 231#define SCC_GSMRL_TPL_16 ((uint)0x00400000) 232#define SCC_GSMRL_TPL_8 ((uint)0x00200000) 233#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) 234#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) 235#define SCC_GSMRL_TPP_01 ((uint)0x00100000) 236#define SCC_GSMRL_TPP_10 ((uint)0x00080000) 237#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) 238#define SCC_GSMRL_TEND ((uint)0x00040000) 239#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) 240#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) 241#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) 242#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) 243#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) 244#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) 245#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) 246#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) 247#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) 248#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) 249#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) 250#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) 251#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) 252#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) 253#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) 254#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) 255#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) 256#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) 257#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ 258#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) 259#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) 260#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) 261#define SCC_GSMRL_ENR ((uint)0x00000020) 262#define SCC_GSMRL_ENT ((uint)0x00000010) 263#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) 264#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) 265#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) 266#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) 267#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) 268#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) 269#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) 270#define SCC_GSMRL_MODE_UART ((uint)0x00000004) 271#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) 272#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) 273#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) 274 275#define SCC_TODR_TOD ((ushort)0x8000) 276 277/* SCC Event and Mask register. 278*/ 279#define SCCM_TXE ((unsigned char)0x10) 280#define SCCM_BSY ((unsigned char)0x04) 281#define SCCM_TX ((unsigned char)0x02) 282#define SCCM_RX ((unsigned char)0x01) 283 284typedef struct scc_param { 285 ushort scc_rbase; /* Rx Buffer descriptor base address */ 286 ushort scc_tbase; /* Tx Buffer descriptor base address */ 287 u_char scc_rfcr; /* Rx function code */ 288 u_char scc_tfcr; /* Tx function code */ 289 ushort scc_mrblr; /* Max receive buffer length */ 290 uint scc_rstate; /* Internal */ 291 uint scc_idp; /* Internal */ 292 ushort scc_rbptr; /* Internal */ 293 ushort scc_ibc; /* Internal */ 294 uint scc_rxtmp; /* Internal */ 295 uint scc_tstate; /* Internal */ 296 uint scc_tdp; /* Internal */ 297 ushort scc_tbptr; /* Internal */ 298 ushort scc_tbc; /* Internal */ 299 uint scc_txtmp; /* Internal */ 300 uint scc_rcrc; /* Internal */ 301 uint scc_tcrc; /* Internal */ 302} sccp_t; 303 304/* Function code bits. 305*/ 306#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ 307 308/* CPM Ethernet through SCCx. 309 */ 310typedef struct scc_enet { 311 sccp_t sen_genscc; 312 uint sen_cpres; /* Preset CRC */ 313 uint sen_cmask; /* Constant mask for CRC */ 314 uint sen_crcec; /* CRC Error counter */ 315 uint sen_alec; /* alignment error counter */ 316 uint sen_disfc; /* discard frame counter */ 317 ushort sen_pads; /* Tx short frame pad character */ 318 ushort sen_retlim; /* Retry limit threshold */ 319 ushort sen_retcnt; /* Retry limit counter */ 320 ushort sen_maxflr; /* maximum frame length register */ 321 ushort sen_minflr; /* minimum frame length register */ 322 ushort sen_maxd1; /* maximum DMA1 length */ 323 ushort sen_maxd2; /* maximum DMA2 length */ 324 ushort sen_maxd; /* Rx max DMA */ 325 ushort sen_dmacnt; /* Rx DMA counter */ 326 ushort sen_maxb; /* Max BD byte count */ 327 ushort sen_gaddr1; /* Group address filter */ 328 ushort sen_gaddr2; 329 ushort sen_gaddr3; 330 ushort sen_gaddr4; 331 uint sen_tbuf0data0; /* Save area 0 - current frame */ 332 uint sen_tbuf0data1; /* Save area 1 - current frame */ 333 uint sen_tbuf0rba; /* Internal */ 334 uint sen_tbuf0crc; /* Internal */ 335 ushort sen_tbuf0bcnt; /* Internal */ 336 ushort sen_paddrh; /* physical address (MSB) */ 337 ushort sen_paddrm; 338 ushort sen_paddrl; /* physical address (LSB) */ 339 ushort sen_pper; /* persistence */ 340 ushort sen_rfbdptr; /* Rx first BD pointer */ 341 ushort sen_tfbdptr; /* Tx first BD pointer */ 342 ushort sen_tlbdptr; /* Tx last BD pointer */ 343 uint sen_tbuf1data0; /* Save area 0 - current frame */ 344 uint sen_tbuf1data1; /* Save area 1 - current frame */ 345 uint sen_tbuf1rba; /* Internal */ 346 uint sen_tbuf1crc; /* Internal */ 347 ushort sen_tbuf1bcnt; /* Internal */ 348 ushort sen_txlen; /* Tx Frame length counter */ 349 ushort sen_iaddr1; /* Individual address filter */ 350 ushort sen_iaddr2; 351 ushort sen_iaddr3; 352 ushort sen_iaddr4; 353 ushort sen_boffcnt; /* Backoff counter */ 354 355 /* NOTE: Some versions of the manual have the following items 356 * incorrectly documented. Below is the proper order. 357 */ 358 ushort sen_taddrh; /* temp address (MSB) */ 359 ushort sen_taddrm; 360 ushort sen_taddrl; /* temp address (LSB) */ 361} scc_enet_t; 362 363/* SCC Event register as used by Ethernet. 364*/ 365#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ 366#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ 367#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ 368#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ 369#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ 370#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ 371 372/* SCC Mode Register (PMSR) as used by Ethernet. 373*/ 374#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ 375#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ 376#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ 377#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ 378#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ 379#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ 380#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ 381#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ 382#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ 383#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ 384#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ 385#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ 386#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ 387 388/* SCC as UART 389*/ 390typedef struct scc_uart { 391 sccp_t scc_genscc; 392 char res1[8]; /* Reserved */ 393 ushort scc_maxidl; /* Maximum idle chars */ 394 ushort scc_idlc; /* temp idle counter */ 395 ushort scc_brkcr; /* Break count register */ 396 ushort scc_parec; /* receive parity error counter */ 397 ushort scc_frmec; /* receive framing error counter */ 398 ushort scc_nosec; /* receive noise counter */ 399 ushort scc_brkec; /* receive break condition counter */ 400 ushort scc_brkln; /* last received break length */ 401 ushort scc_uaddr1; /* UART address character 1 */ 402 ushort scc_uaddr2; /* UART address character 2 */ 403 ushort scc_rtemp; /* Temp storage */ 404 ushort scc_toseq; /* Transmit out of sequence char */ 405 ushort scc_char1; /* control character 1 */ 406 ushort scc_char2; /* control character 2 */ 407 ushort scc_char3; /* control character 3 */ 408 ushort scc_char4; /* control character 4 */ 409 ushort scc_char5; /* control character 5 */ 410 ushort scc_char6; /* control character 6 */ 411 ushort scc_char7; /* control character 7 */ 412 ushort scc_char8; /* control character 8 */ 413 ushort scc_rccm; /* receive control character mask */ 414 ushort scc_rccr; /* receive control character register */ 415 ushort scc_rlbc; /* receive last break character */ 416} scc_uart_t; 417 418/* SCC Event and Mask registers when it is used as a UART. 419*/ 420#define UART_SCCM_GLR ((ushort)0x1000) 421#define UART_SCCM_GLT ((ushort)0x0800) 422#define UART_SCCM_AB ((ushort)0x0200) 423#define UART_SCCM_IDL ((ushort)0x0100) 424#define UART_SCCM_GRA ((ushort)0x0080) 425#define UART_SCCM_BRKE ((ushort)0x0040) 426#define UART_SCCM_BRKS ((ushort)0x0020) 427#define UART_SCCM_CCR ((ushort)0x0008) 428#define UART_SCCM_BSY ((ushort)0x0004) 429#define UART_SCCM_TX ((ushort)0x0002) 430#define UART_SCCM_RX ((ushort)0x0001) 431 432/* The SCC PMSR when used as a UART. 433*/ 434#define SCU_PSMR_FLC ((ushort)0x8000) 435#define SCU_PSMR_SL ((ushort)0x4000) 436#define SCU_PSMR_CL ((ushort)0x3000) 437#define SCU_PSMR_UM ((ushort)0x0c00) 438#define SCU_PSMR_FRZ ((ushort)0x0200) 439#define SCU_PSMR_RZS ((ushort)0x0100) 440#define SCU_PSMR_SYN ((ushort)0x0080) 441#define SCU_PSMR_DRT ((ushort)0x0040) 442#define SCU_PSMR_PEN ((ushort)0x0010) 443#define SCU_PSMR_RPM ((ushort)0x000c) 444#define SCU_PSMR_REVP ((ushort)0x0008) 445#define SCU_PSMR_TPM ((ushort)0x0003) 446#define SCU_PSMR_TEVP ((ushort)0x0002) 447 448/* CPM Transparent mode SCC. 449 */ 450typedef struct scc_trans { 451 sccp_t st_genscc; 452 uint st_cpres; /* Preset CRC */ 453 uint st_cmask; /* Constant mask for CRC */ 454} scc_trans_t; 455 456/* IIC parameter RAM. 457*/ 458typedef struct iic { 459 ushort iic_rbase; /* Rx Buffer descriptor base address */ 460 ushort iic_tbase; /* Tx Buffer descriptor base address */ 461 u_char iic_rfcr; /* Rx function code */ 462 u_char iic_tfcr; /* Tx function code */ 463 ushort iic_mrblr; /* Max receive buffer length */ 464 uint iic_rstate; /* Internal */ 465 uint iic_rdp; /* Internal */ 466 ushort iic_rbptr; /* Internal */ 467 ushort iic_rbc; /* Internal */ 468 uint iic_rxtmp; /* Internal */ 469 uint iic_tstate; /* Internal */ 470 uint iic_tdp; /* Internal */ 471 ushort iic_tbptr; /* Internal */ 472 ushort iic_tbc; /* Internal */ 473 uint iic_txtmp; /* Internal */ 474 char res1[4]; /* Reserved */ 475 ushort iic_rpbase; /* Relocation pointer */ 476 char res2[2]; /* Reserved */ 477} iic_t; 478 479/* 480 * RISC Controller Configuration Register definitons 481 */ 482#define RCCR_TIME 0x8000 /* RISC Timer Enable */ 483#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ 484#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ 485 486/* RISC Timer Parameter RAM offset */ 487#define PROFF_RTMR ((uint)0x01B0) 488 489typedef struct risc_timer_pram { 490 unsigned short tm_base; /* RISC Timer Table Base Address */ 491 unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ 492 unsigned short r_tmr; /* RISC Timer Mode Register */ 493 unsigned short r_tmv; /* RISC Timer Valid Register */ 494 unsigned long tm_cmd; /* RISC Timer Command Register */ 495 unsigned long tm_cnt; /* RISC Timer Internal Count */ 496} rt_pram_t; 497 498/* Bits in RISC Timer Command Register */ 499#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ 500#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ 501#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ 502#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ 503#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ 504 505/* CPM interrupts. There are nearly 32 interrupts generated by CPM 506 * channels or devices. All of these are presented to the PPC core 507 * as a single interrupt. The CPM interrupt handler dispatches its 508 * own handlers, in a similar fashion to the PPC core handler. We 509 * use the table as defined in the manuals (i.e. no special high 510 * priority and SCC1 == SCCa, etc...). 511 */ 512#define CPMVEC_NR 32 513#define CPMVEC_PIO_PC15 ((ushort)0x1f) 514#define CPMVEC_SCC1 ((ushort)0x1e) 515#define CPMVEC_SCC2 ((ushort)0x1d) 516#define CPMVEC_SCC3 ((ushort)0x1c) 517#define CPMVEC_SCC4 ((ushort)0x1b) 518#define CPMVEC_PIO_PC14 ((ushort)0x1a) 519#define CPMVEC_TIMER1 ((ushort)0x19) 520#define CPMVEC_PIO_PC13 ((ushort)0x18) 521#define CPMVEC_PIO_PC12 ((ushort)0x17) 522#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) 523#define CPMVEC_IDMA1 ((ushort)0x15) 524#define CPMVEC_IDMA2 ((ushort)0x14) 525#define CPMVEC_TIMER2 ((ushort)0x12) 526#define CPMVEC_RISCTIMER ((ushort)0x11) 527#define CPMVEC_I2C ((ushort)0x10) 528#define CPMVEC_PIO_PC11 ((ushort)0x0f) 529#define CPMVEC_PIO_PC10 ((ushort)0x0e) 530#define CPMVEC_TIMER3 ((ushort)0x0c) 531#define CPMVEC_PIO_PC9 ((ushort)0x0b) 532#define CPMVEC_PIO_PC8 ((ushort)0x0a) 533#define CPMVEC_PIO_PC7 ((ushort)0x09) 534#define CPMVEC_TIMER4 ((ushort)0x07) 535#define CPMVEC_PIO_PC6 ((ushort)0x06) 536#define CPMVEC_SPI ((ushort)0x05) 537#define CPMVEC_SMC1 ((ushort)0x04) 538#define CPMVEC_SMC2 ((ushort)0x03) 539#define CPMVEC_PIO_PC5 ((ushort)0x02) 540#define CPMVEC_PIO_PC4 ((ushort)0x01) 541#define CPMVEC_ERROR ((ushort)0x00) 542 543/* CPM interrupt configuration vector. 544*/ 545#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ 546#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ 547#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ 548#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ 549#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ 550#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ 551#define CICR_IEN ((uint)0x00000080) /* Int. enable */ 552#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ 553 554#define CPM_PIN_INPUT 0 555#define CPM_PIN_OUTPUT 1 556#define CPM_PIN_PRIMARY 0 557#define CPM_PIN_SECONDARY 2 558#define CPM_PIN_GPIO 4 559#define CPM_PIN_OPENDRAIN 8 560#define CPM_PIN_FALLEDGE 16 561#define CPM_PIN_ANYEDGE 0 562 563enum cpm_port { 564 CPM_PORTA, 565 CPM_PORTB, 566 CPM_PORTC, 567 CPM_PORTD, 568 CPM_PORTE, 569}; 570 571void cpm1_set_pin(enum cpm_port port, int pin, int flags); 572 573enum cpm_clk_dir { 574 CPM_CLK_RX, 575 CPM_CLK_TX, 576 CPM_CLK_RTX 577}; 578 579enum cpm_clk_target { 580 CPM_CLK_SCC1, 581 CPM_CLK_SCC2, 582 CPM_CLK_SCC3, 583 CPM_CLK_SCC4, 584 CPM_CLK_SMC1, 585 CPM_CLK_SMC2, 586}; 587 588enum cpm_clk { 589 CPM_BRG1, /* Baud Rate Generator 1 */ 590 CPM_BRG2, /* Baud Rate Generator 2 */ 591 CPM_BRG3, /* Baud Rate Generator 3 */ 592 CPM_BRG4, /* Baud Rate Generator 4 */ 593 CPM_CLK1, /* Clock 1 */ 594 CPM_CLK2, /* Clock 2 */ 595 CPM_CLK3, /* Clock 3 */ 596 CPM_CLK4, /* Clock 4 */ 597 CPM_CLK5, /* Clock 5 */ 598 CPM_CLK6, /* Clock 6 */ 599 CPM_CLK7, /* Clock 7 */ 600 CPM_CLK8, /* Clock 8 */ 601}; 602 603int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); 604int cpm1_gpiochip_add16(struct device *dev); 605int cpm1_gpiochip_add32(struct device *dev); 606 607#endif /* __CPM1__ */ 608