1/* 2 * MPC8xx Internal Memory Map 3 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) 4 * 5 * The I/O on the MPC860 is comprised of blocks of special registers 6 * and the dual port ram for the Communication Processor Module. 7 * Within this space are functional units such as the SIU, memory 8 * controller, system timers, and other control functions. It is 9 * a combination that I found difficult to separate into logical 10 * functional files.....but anyone else is welcome to try. -- Dan 11 */ 12#ifdef __KERNEL__ 13#ifndef __IMMAP_8XX__ 14#define __IMMAP_8XX__ 15 16/* System configuration registers. 17*/ 18typedef struct sys_conf { 19 uint sc_siumcr; 20 uint sc_sypcr; 21 uint sc_swt; 22 char res1[2]; 23 ushort sc_swsr; 24 uint sc_sipend; 25 uint sc_simask; 26 uint sc_siel; 27 uint sc_sivec; 28 uint sc_tesr; 29 char res2[0xc]; 30 uint sc_sdcr; 31 char res3[0x4c]; 32} sysconf8xx_t; 33 34/* PCMCIA configuration registers. 35*/ 36typedef struct pcmcia_conf { 37 uint pcmc_pbr0; 38 uint pcmc_por0; 39 uint pcmc_pbr1; 40 uint pcmc_por1; 41 uint pcmc_pbr2; 42 uint pcmc_por2; 43 uint pcmc_pbr3; 44 uint pcmc_por3; 45 uint pcmc_pbr4; 46 uint pcmc_por4; 47 uint pcmc_pbr5; 48 uint pcmc_por5; 49 uint pcmc_pbr6; 50 uint pcmc_por6; 51 uint pcmc_pbr7; 52 uint pcmc_por7; 53 char res1[0x20]; 54 uint pcmc_pgcra; 55 uint pcmc_pgcrb; 56 uint pcmc_pscr; 57 char res2[4]; 58 uint pcmc_pipr; 59 char res3[4]; 60 uint pcmc_per; 61 char res4[4]; 62} pcmconf8xx_t; 63 64/* Memory controller registers. 65*/ 66typedef struct mem_ctlr { 67 uint memc_br0; 68 uint memc_or0; 69 uint memc_br1; 70 uint memc_or1; 71 uint memc_br2; 72 uint memc_or2; 73 uint memc_br3; 74 uint memc_or3; 75 uint memc_br4; 76 uint memc_or4; 77 uint memc_br5; 78 uint memc_or5; 79 uint memc_br6; 80 uint memc_or6; 81 uint memc_br7; 82 uint memc_or7; 83 char res1[0x24]; 84 uint memc_mar; 85 uint memc_mcr; 86 char res2[4]; 87 uint memc_mamr; 88 uint memc_mbmr; 89 ushort memc_mstat; 90 ushort memc_mptpr; 91 uint memc_mdr; 92 char res3[0x80]; 93} memctl8xx_t; 94 95/*----------------------------------------------------------------------- 96 * BR - Memory Controller: Base Register 16-9 97 */ 98#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ 99#define BR_AT_MSK 0x00007000 /* Address Type Mask */ 100#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ 101#define BR_PS_32 0x00000000 /* 32 bit port size */ 102#define BR_PS_16 0x00000800 /* 16 bit port size */ 103#define BR_PS_8 0x00000400 /* 8 bit port size */ 104#define BR_PARE 0x00000200 /* Parity Enable */ 105#define BR_WP 0x00000100 /* Write Protect */ 106#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ 107#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ 108#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ 109#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ 110#define BR_V 0x00000001 /* Bank Valid */ 111 112/*----------------------------------------------------------------------- 113 * OR - Memory Controller: Option Register 16-11 114 */ 115#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ 116#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ 117#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ 118 /* Address Multiplex */ 119#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ 120#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ 121#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ 122#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ 123#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ 124#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ 125#define OR_BI 0x00000100 /* Burst inhibit */ 126#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */ 127#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ 128#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ 129#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ 130#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ 131#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ 132#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ 133#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ 134#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ 135#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ 136#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ 137#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ 138#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ 139#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ 140#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ 141#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ 142#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ 143#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ 144#define OR_TRLX 0x00000004 /* Timing Relaxed */ 145#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ 146 147/* System Integration Timers. 148*/ 149typedef struct sys_int_timers { 150 ushort sit_tbscr; 151 char res0[0x02]; 152 uint sit_tbreff0; 153 uint sit_tbreff1; 154 char res1[0x14]; 155 ushort sit_rtcsc; 156 char res2[0x02]; 157 uint sit_rtc; 158 uint sit_rtsec; 159 uint sit_rtcal; 160 char res3[0x10]; 161 ushort sit_piscr; 162 char res4[2]; 163 uint sit_pitc; 164 uint sit_pitr; 165 char res5[0x34]; 166} sit8xx_t; 167 168#define TBSCR_TBIRQ_MASK ((ushort)0xff00) 169#define TBSCR_REFA ((ushort)0x0080) 170#define TBSCR_REFB ((ushort)0x0040) 171#define TBSCR_REFAE ((ushort)0x0008) 172#define TBSCR_REFBE ((ushort)0x0004) 173#define TBSCR_TBF ((ushort)0x0002) 174#define TBSCR_TBE ((ushort)0x0001) 175 176#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) 177#define RTCSC_SEC ((ushort)0x0080) 178#define RTCSC_ALR ((ushort)0x0040) 179#define RTCSC_38K ((ushort)0x0010) 180#define RTCSC_SIE ((ushort)0x0008) 181#define RTCSC_ALE ((ushort)0x0004) 182#define RTCSC_RTF ((ushort)0x0002) 183#define RTCSC_RTE ((ushort)0x0001) 184 185#define PISCR_PIRQ_MASK ((ushort)0xff00) 186#define PISCR_PS ((ushort)0x0080) 187#define PISCR_PIE ((ushort)0x0004) 188#define PISCR_PTF ((ushort)0x0002) 189#define PISCR_PTE ((ushort)0x0001) 190 191/* Clocks and Reset. 192*/ 193typedef struct clk_and_reset { 194 uint car_sccr; 195 uint car_plprcr; 196 uint car_rsr; 197 char res[0x74]; /* Reserved area */ 198} car8xx_t; 199 200/* System Integration Timers keys. 201*/ 202typedef struct sitk { 203 uint sitk_tbscrk; 204 uint sitk_tbreff0k; 205 uint sitk_tbreff1k; 206 uint sitk_tbk; 207 char res1[0x10]; 208 uint sitk_rtcsck; 209 uint sitk_rtck; 210 uint sitk_rtseck; 211 uint sitk_rtcalk; 212 char res2[0x10]; 213 uint sitk_piscrk; 214 uint sitk_pitck; 215 char res3[0x38]; 216} sitk8xx_t; 217 218/* Clocks and reset keys. 219*/ 220typedef struct cark { 221 uint cark_sccrk; 222 uint cark_plprcrk; 223 uint cark_rsrk; 224 char res[0x474]; 225} cark8xx_t; 226 227/* The key to unlock registers maintained by keep-alive power. 228*/ 229#define KAPWR_KEY ((unsigned int)0x55ccaa33) 230 231/* Video interface. MPC823 Only. 232*/ 233typedef struct vid823 { 234 ushort vid_vccr; 235 ushort res1; 236 u_char vid_vsr; 237 u_char res2; 238 u_char vid_vcmr; 239 u_char res3; 240 uint vid_vbcb; 241 uint res4; 242 uint vid_vfcr0; 243 uint vid_vfaa0; 244 uint vid_vfba0; 245 uint vid_vfcr1; 246 uint vid_vfaa1; 247 uint vid_vfba1; 248 u_char res5[0x18]; 249} vid823_t; 250 251/* LCD interface. 823 Only. 252*/ 253typedef struct lcd { 254 uint lcd_lccr; 255 uint lcd_lchcr; 256 uint lcd_lcvcr; 257 char res1[4]; 258 uint lcd_lcfaa; 259 uint lcd_lcfba; 260 char lcd_lcsr; 261 char res2[0x7]; 262} lcd823_t; 263 264/* I2C 265*/ 266typedef struct i2c { 267 u_char i2c_i2mod; 268 char res1[3]; 269 u_char i2c_i2add; 270 char res2[3]; 271 u_char i2c_i2brg; 272 char res3[3]; 273 u_char i2c_i2com; 274 char res4[3]; 275 u_char i2c_i2cer; 276 char res5[3]; 277 u_char i2c_i2cmr; 278 char res6[0x8b]; 279} i2c8xx_t; 280 281/* DMA control/status registers. 282*/ 283typedef struct sdma_csr { 284 char res1[4]; 285 uint sdma_sdar; 286 u_char sdma_sdsr; 287 char res3[3]; 288 u_char sdma_sdmr; 289 char res4[3]; 290 u_char sdma_idsr1; 291 char res5[3]; 292 u_char sdma_idmr1; 293 char res6[3]; 294 u_char sdma_idsr2; 295 char res7[3]; 296 u_char sdma_idmr2; 297 char res8[0x13]; 298} sdma8xx_t; 299 300/* Communication Processor Module Interrupt Controller. 301*/ 302typedef struct cpm_ic { 303 ushort cpic_civr; 304 char res[0xe]; 305 uint cpic_cicr; 306 uint cpic_cipr; 307 uint cpic_cimr; 308 uint cpic_cisr; 309} cpic8xx_t; 310 311/* Input/Output Port control/status registers. 312*/ 313typedef struct io_port { 314 ushort iop_padir; 315 ushort iop_papar; 316 ushort iop_paodr; 317 ushort iop_padat; 318 char res1[8]; 319 ushort iop_pcdir; 320 ushort iop_pcpar; 321 ushort iop_pcso; 322 ushort iop_pcdat; 323 ushort iop_pcint; 324 char res2[6]; 325 ushort iop_pddir; 326 ushort iop_pdpar; 327 char res3[2]; 328 ushort iop_pddat; 329 uint utmode; 330 char res4[4]; 331} iop8xx_t; 332 333/* Communication Processor Module Timers 334*/ 335typedef struct cpm_timers { 336 ushort cpmt_tgcr; 337 char res1[0xe]; 338 ushort cpmt_tmr1; 339 ushort cpmt_tmr2; 340 ushort cpmt_trr1; 341 ushort cpmt_trr2; 342 ushort cpmt_tcr1; 343 ushort cpmt_tcr2; 344 ushort cpmt_tcn1; 345 ushort cpmt_tcn2; 346 ushort cpmt_tmr3; 347 ushort cpmt_tmr4; 348 ushort cpmt_trr3; 349 ushort cpmt_trr4; 350 ushort cpmt_tcr3; 351 ushort cpmt_tcr4; 352 ushort cpmt_tcn3; 353 ushort cpmt_tcn4; 354 ushort cpmt_ter1; 355 ushort cpmt_ter2; 356 ushort cpmt_ter3; 357 ushort cpmt_ter4; 358 char res2[8]; 359} cpmtimer8xx_t; 360 361/* Finally, the Communication Processor stuff..... 362*/ 363typedef struct scc { /* Serial communication channels */ 364 uint scc_gsmrl; 365 uint scc_gsmrh; 366 ushort scc_psmr; 367 char res1[2]; 368 ushort scc_todr; 369 ushort scc_dsr; 370 ushort scc_scce; 371 char res2[2]; 372 ushort scc_sccm; 373 char res3; 374 u_char scc_sccs; 375 char res4[8]; 376} scc_t; 377 378typedef struct smc { /* Serial management channels */ 379 char res1[2]; 380 ushort smc_smcmr; 381 char res2[2]; 382 u_char smc_smce; 383 char res3[3]; 384 u_char smc_smcm; 385 char res4[5]; 386} smc_t; 387 388/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but 389 * it fits within the address space. 390 */ 391 392typedef struct fec { 393 uint fec_addr_low; /* lower 32 bits of station address */ 394 ushort fec_addr_high; /* upper 16 bits of station address */ 395 ushort res1; /* reserved */ 396 uint fec_grp_hash_table_high; /* upper 32-bits of hash table */ 397 uint fec_grp_hash_table_low; /* lower 32-bits of hash table */ 398 uint fec_r_des_start; /* beginning of Rx descriptor ring */ 399 uint fec_x_des_start; /* beginning of Tx descriptor ring */ 400 uint fec_r_buff_size; /* Rx buffer size */ 401 uint res2[9]; /* reserved */ 402 uint fec_ecntrl; /* ethernet control register */ 403 uint fec_ievent; /* interrupt event register */ 404 uint fec_imask; /* interrupt mask register */ 405 uint fec_ivec; /* interrupt level and vector status */ 406 uint fec_r_des_active; /* Rx ring updated flag */ 407 uint fec_x_des_active; /* Tx ring updated flag */ 408 uint res3[10]; /* reserved */ 409 uint fec_mii_data; /* MII data register */ 410 uint fec_mii_speed; /* MII speed control register */ 411 uint res4[17]; /* reserved */ 412 uint fec_r_bound; /* end of RAM (read-only) */ 413 uint fec_r_fstart; /* Rx FIFO start address */ 414 uint res5[6]; /* reserved */ 415 uint fec_x_fstart; /* Tx FIFO start address */ 416 uint res6[17]; /* reserved */ 417 uint fec_fun_code; /* fec SDMA function code */ 418 uint res7[3]; /* reserved */ 419 uint fec_r_cntrl; /* Rx control register */ 420 uint fec_r_hash; /* Rx hash register */ 421 uint res8[14]; /* reserved */ 422 uint fec_x_cntrl; /* Tx control register */ 423 uint res9[0x1e]; /* reserved */ 424} fec_t; 425 426/* The FEC and LCD color map share the same address space.... 427 * I guess we will never see an 823T :-). 428 */ 429union fec_lcd { 430 fec_t fl_un_fec; 431 u_char fl_un_cmap[0x200]; 432}; 433 434typedef struct comm_proc { 435 /* General control and status registers. 436 */ 437 ushort cp_cpcr; 438 u_char res1[2]; 439 ushort cp_rccr; 440 u_char res2; 441 u_char cp_rmds; 442 u_char res3[4]; 443 ushort cp_cpmcr1; 444 ushort cp_cpmcr2; 445 ushort cp_cpmcr3; 446 ushort cp_cpmcr4; 447 u_char res4[2]; 448 ushort cp_rter; 449 u_char res5[2]; 450 ushort cp_rtmr; 451 u_char res6[0x14]; 452 453 /* Baud rate generators. 454 */ 455 uint cp_brgc1; 456 uint cp_brgc2; 457 uint cp_brgc3; 458 uint cp_brgc4; 459 460 /* Serial Communication Channels. 461 */ 462 scc_t cp_scc[4]; 463 464 /* Serial Management Channels. 465 */ 466 smc_t cp_smc[2]; 467 468 /* Serial Peripheral Interface. 469 */ 470 ushort cp_spmode; 471 u_char res7[4]; 472 u_char cp_spie; 473 u_char res8[3]; 474 u_char cp_spim; 475 u_char res9[2]; 476 u_char cp_spcom; 477 u_char res10[2]; 478 479 /* Parallel Interface Port. 480 */ 481 u_char res11[2]; 482 ushort cp_pipc; 483 u_char res12[2]; 484 ushort cp_ptpr; 485 uint cp_pbdir; 486 uint cp_pbpar; 487 u_char res13[2]; 488 ushort cp_pbodr; 489 uint cp_pbdat; 490 491 /* Port E - MPC87x/88x only. 492 */ 493 uint cp_pedir; 494 uint cp_pepar; 495 uint cp_peso; 496 uint cp_peodr; 497 uint cp_pedat; 498 499 /* Communications Processor Timing Register - 500 Contains RMII Timing for the FECs on MPC87x/88x only. 501 */ 502 uint cp_cptr; 503 504 /* Serial Interface and Time Slot Assignment. 505 */ 506 uint cp_simode; 507 u_char cp_sigmr; 508 u_char res15; 509 u_char cp_sistr; 510 u_char cp_sicmr; 511 u_char res16[4]; 512 uint cp_sicr; 513 uint cp_sirp; 514 u_char res17[0xc]; 515 516 /* 256 bytes of MPC823 video controller RAM array. 517 */ 518 u_char cp_vcram[0x100]; 519 u_char cp_siram[0x200]; 520 521 /* The fast ethernet controller is not really part of the CPM, 522 * but it resides in the address space. 523 * The LCD color map is also here. 524 */ 525 union fec_lcd fl_un; 526#define cp_fec fl_un.fl_un_fec 527#define lcd_cmap fl_un.fl_un_cmap 528 char res18[0xE00]; 529 530 /* The DUET family has a second FEC here */ 531 fec_t cp_fec2; 532#define cp_fec1 cp_fec /* consistency macro */ 533 534 /* Dual Ported RAM follows. 535 * There are many different formats for this memory area 536 * depending upon the devices used and options chosen. 537 * Some processors don't have all of it populated. 538 */ 539 u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ 540 u_char cp_dparam[0x400]; /* Parameter RAM */ 541} cpm8xx_t; 542 543/* Internal memory map. 544*/ 545typedef struct immap { 546 sysconf8xx_t im_siu_conf; /* SIU Configuration */ 547 pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ 548 memctl8xx_t im_memctl; /* Memory Controller */ 549 sit8xx_t im_sit; /* System integration timers */ 550 car8xx_t im_clkrst; /* Clocks and reset */ 551 sitk8xx_t im_sitk; /* Sys int timer keys */ 552 cark8xx_t im_clkrstk; /* Clocks and reset keys */ 553 vid823_t im_vid; /* Video (823 only) */ 554 lcd823_t im_lcd; /* LCD (823 only) */ 555 i2c8xx_t im_i2c; /* I2C control/status */ 556 sdma8xx_t im_sdma; /* SDMA control/status */ 557 cpic8xx_t im_cpic; /* CPM Interrupt Controller */ 558 iop8xx_t im_ioport; /* IO Port control/status */ 559 cpmtimer8xx_t im_cpmtimer; /* CPM timers */ 560 cpm8xx_t im_cpm; /* Communication processor */ 561} immap_t; 562 563extern immap_t __iomem *mpc8xx_immr; 564 565#endif /* __IMMAP_8XX__ */ 566#endif /* __KERNEL__ */ 567