1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License.  See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * PROM library initialisation code.
7 *
8 * Copyright (C) 1999,2000,2004,2005,2012  MIPS Technologies, Inc.
9 * All rights reserved.
10 * Authors: Carsten Langgaard <carstenl@mips.com>
11 *         Maciej W. Rozycki <macro@mips.com>
12 *          Steven J. Hill <sjhill@mips.com>
13 */
14#include <linux/init.h>
15#include <linux/string.h>
16#include <linux/kernel.h>
17#include <linux/pci_regs.h>
18#include <linux/serial_core.h>
19
20#include <asm/cacheflush.h>
21#include <asm/smp-ops.h>
22#include <asm/traps.h>
23#include <asm/fw/fw.h>
24#include <asm/mips-cps.h>
25#include <asm/mips-boards/generic.h>
26#include <asm/mips-boards/malta.h>
27
28static int mips_revision_corid;
29int mips_revision_sconid;
30
31/* Bonito64 system controller register base. */
32unsigned long _pcictrl_bonito;
33unsigned long _pcictrl_bonito_pcicfg;
34
35/* GT64120 system controller register base */
36unsigned long _pcictrl_gt64120;
37
38/* MIPS System controller register base */
39unsigned long _pcictrl_msc;
40
41#ifdef CONFIG_SERIAL_8250_CONSOLE
42static void __init console_config(void)
43{
44	char console_string[40];
45	int baud = 0;
46	char parity = '\0', bits = '\0', flow = '\0';
47	char *s;
48
49	s = fw_getenv("modetty0");
50	if (s) {
51		while (*s >= '0' && *s <= '9')
52			baud = baud*10 + *s++ - '0';
53		if (*s == ',')
54			s++;
55		if (*s)
56			parity = *s++;
57		if (*s == ',')
58			s++;
59		if (*s)
60			bits = *s++;
61		if (*s == ',')
62			s++;
63		if (*s == 'h')
64			flow = 'r';
65	}
66	if (baud == 0)
67		baud = 38400;
68	if (parity != 'n' && parity != 'o' && parity != 'e')
69		parity = 'n';
70	if (bits != '7' && bits != '8')
71		bits = '8';
72	if (flow == '\0')
73		flow = 'r';
74
75	if ((strstr(fw_getcmdline(), "earlycon=")) == NULL) {
76		sprintf(console_string, "uart8250,io,0x3f8,%d%c%c", baud,
77			parity, bits);
78		setup_earlycon(console_string);
79	}
80
81	if ((strstr(fw_getcmdline(), "console=")) == NULL) {
82		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
83			parity, bits, flow);
84		strcat(fw_getcmdline(), console_string);
85		pr_info("Config serial console:%s\n", console_string);
86	}
87}
88#endif
89
90static void __init mips_nmi_setup(void)
91{
92	void *base;
93
94	base = cpu_has_veic ?
95		(void *)(CAC_BASE + 0xa80) :
96		(void *)(CAC_BASE + 0x380);
97	memcpy(base, except_vec_nmi, 0x80);
98	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
99}
100
101static void __init mips_ejtag_setup(void)
102{
103	void *base;
104	extern char except_vec_ejtag_debug[];
105
106	base = cpu_has_veic ?
107		(void *)(CAC_BASE + 0xa00) :
108		(void *)(CAC_BASE + 0x300);
109	memcpy(base, except_vec_ejtag_debug, 0x80);
110	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
111}
112
113phys_addr_t mips_cpc_default_phys_base(void)
114{
115	return CPC_BASE_ADDR;
116}
117
118void __init prom_init(void)
119{
120	/*
121	 * early setup of _pcictrl_bonito so that we can determine
122	 * the system controller on a CORE_EMUL board
123	 */
124	_pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE);
125
126	mips_revision_corid = MIPS_REVISION_CORID;
127
128	if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) {
129		if (BONITO_PCIDID == 0x0001df53 ||
130		    BONITO_PCIDID == 0x0003df53)
131			mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON;
132		else
133			mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC;
134	}
135
136	mips_revision_sconid = MIPS_REVISION_SCONID;
137	if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) {
138		switch (mips_revision_corid) {
139		case MIPS_REVISION_CORID_QED_RM5261:
140		case MIPS_REVISION_CORID_CORE_LV:
141		case MIPS_REVISION_CORID_CORE_FPGA:
142		case MIPS_REVISION_CORID_CORE_FPGAR2:
143			mips_revision_sconid = MIPS_REVISION_SCON_GT64120;
144			break;
145		case MIPS_REVISION_CORID_CORE_EMUL_BON:
146		case MIPS_REVISION_CORID_BONITO64:
147		case MIPS_REVISION_CORID_CORE_20K:
148			mips_revision_sconid = MIPS_REVISION_SCON_BONITO;
149			break;
150		case MIPS_REVISION_CORID_CORE_MSC:
151		case MIPS_REVISION_CORID_CORE_FPGA2:
152		case MIPS_REVISION_CORID_CORE_24K:
153			/*
154			 * SOCit/ROCit support is essentially identical
155			 * but make an attempt to distinguish them
156			 */
157			mips_revision_sconid = MIPS_REVISION_SCON_SOCIT;
158			break;
159		case MIPS_REVISION_CORID_CORE_FPGA3:
160		case MIPS_REVISION_CORID_CORE_FPGA4:
161		case MIPS_REVISION_CORID_CORE_FPGA5:
162		case MIPS_REVISION_CORID_CORE_EMUL_MSC:
163		default:
164			/* See above */
165			mips_revision_sconid = MIPS_REVISION_SCON_ROCIT;
166			break;
167		}
168	}
169
170	switch (mips_revision_sconid) {
171		u32 start, map, mask, data;
172
173	case MIPS_REVISION_SCON_GT64120:
174		/*
175		 * Setup the North bridge to do Master byte-lane swapping
176		 * when running in bigendian.
177		 */
178		_pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000);
179
180#ifdef CONFIG_CPU_LITTLE_ENDIAN
181		GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT |
182			 GT_PCI0_CMD_SBYTESWAP_BIT);
183#else
184		GT_WRITE(GT_PCI0_CMD_OFS, 0);
185#endif
186		/* Fix up PCI I/O mapping if necessary (for Atlas).  */
187		start = GT_READ(GT_PCI0IOLD_OFS);
188		map = GT_READ(GT_PCI0IOREMAP_OFS);
189		if ((start & map) != 0) {
190			map &= ~start;
191			GT_WRITE(GT_PCI0IOREMAP_OFS, map);
192		}
193
194		set_io_port_base(MALTA_GT_PORT_BASE);
195		break;
196
197	case MIPS_REVISION_SCON_BONITO:
198		_pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE);
199
200		/*
201		 * Disable Bonito IOBC.
202		 */
203		BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
204			~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
205			  BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
206
207		/*
208		 * Setup the North bridge to do Master byte-lane swapping
209		 * when running in bigendian.
210		 */
211#ifdef CONFIG_CPU_LITTLE_ENDIAN
212		BONITO_BONGENCFG = BONITO_BONGENCFG &
213			~(BONITO_BONGENCFG_MSTRBYTESWAP |
214			  BONITO_BONGENCFG_BYTESWAP);
215#else
216		BONITO_BONGENCFG = BONITO_BONGENCFG |
217			BONITO_BONGENCFG_MSTRBYTESWAP |
218			BONITO_BONGENCFG_BYTESWAP;
219#endif
220
221		set_io_port_base(MALTA_BONITO_PORT_BASE);
222		break;
223
224	case MIPS_REVISION_SCON_SOCIT:
225	case MIPS_REVISION_SCON_ROCIT:
226		_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
227mips_pci_controller:
228		mb();
229		MSC_READ(MSC01_PCI_CFG, data);
230		MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
231		wmb();
232
233		/* Fix up lane swapping.  */
234#ifdef CONFIG_CPU_LITTLE_ENDIAN
235		MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
236#else
237		MSC_WRITE(MSC01_PCI_SWAP,
238			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF |
239			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
240			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
241#endif
242
243		/*
244		 * Setup the Malta max (2GB) memory for PCI DMA in host bridge
245		 * in transparent addressing mode.
246		 */
247		mask = PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_PREFETCH;
248		MSC_WRITE(MSC01_PCI_BAR0, mask);
249		MSC_WRITE(MSC01_PCI_HEAD4, mask);
250
251		mask &= MSC01_PCI_BAR0_SIZE_MSK;
252		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask);
253		MSC_WRITE(MSC01_PCI_P2SCMAPL, mask);
254
255		/* Don't handle target retries indefinitely.  */
256		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
257		    MSC01_PCI_CFG_MAXRTRY_MSK)
258			data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
259					 MSC01_PCI_CFG_MAXRTRY_SHF)) |
260			       ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
261				MSC01_PCI_CFG_MAXRTRY_SHF);
262
263		wmb();
264		MSC_WRITE(MSC01_PCI_CFG, data);
265		mb();
266
267		set_io_port_base(MALTA_MSC_PORT_BASE);
268		break;
269
270	case MIPS_REVISION_SCON_SOCITSC:
271	case MIPS_REVISION_SCON_SOCITSCP:
272		_pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000);
273		goto mips_pci_controller;
274
275	default:
276		/* Unknown system controller */
277		while (1);	/* We die here... */
278	}
279	board_nmi_handler_setup = mips_nmi_setup;
280	board_ejtag_handler_setup = mips_ejtag_setup;
281
282	fw_init_cmdline();
283	fw_meminit();
284#ifdef CONFIG_SERIAL_8250_CONSOLE
285	console_config();
286#endif
287	/* Early detection of CMP support */
288	mips_cpc_probe();
289
290	if (!register_cps_smp_ops())
291		return;
292	if (!register_vsmp_smp_ops())
293		return;
294	register_up_smp_ops();
295}
296