1/* SPDX-License-Identifier: GPL-2.0 */ 2/****************************************************************************/ 3 4/* 5 * m5206sim.h -- ColdFire 5206 System Integration Module support. 6 * 7 * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) 8 * (C) Copyright 2000, Lineo Inc. (www.lineo.com) 9 */ 10 11/****************************************************************************/ 12#ifndef m5206sim_h 13#define m5206sim_h 14/****************************************************************************/ 15 16#define CPU_NAME "COLDFIRE(m5206)" 17#define CPU_INSTR_PER_JIFFY 3 18#define MCF_BUSCLK MCF_CLK 19 20#include <asm/m52xxacr.h> 21 22/* 23 * Define the 5206 SIM register set addresses. 24 */ 25#define MCFSIM_SIMR (MCF_MBAR + 0x03) /* SIM Config reg */ 26#define MCFSIM_ICR1 (MCF_MBAR + 0x14) /* Intr Ctrl reg 1 */ 27#define MCFSIM_ICR2 (MCF_MBAR + 0x15) /* Intr Ctrl reg 2 */ 28#define MCFSIM_ICR3 (MCF_MBAR + 0x16) /* Intr Ctrl reg 3 */ 29#define MCFSIM_ICR4 (MCF_MBAR + 0x17) /* Intr Ctrl reg 4 */ 30#define MCFSIM_ICR5 (MCF_MBAR + 0x18) /* Intr Ctrl reg 5 */ 31#define MCFSIM_ICR6 (MCF_MBAR + 0x19) /* Intr Ctrl reg 6 */ 32#define MCFSIM_ICR7 (MCF_MBAR + 0x1a) /* Intr Ctrl reg 7 */ 33#define MCFSIM_ICR8 (MCF_MBAR + 0x1b) /* Intr Ctrl reg 8 */ 34#define MCFSIM_ICR9 (MCF_MBAR + 0x1c) /* Intr Ctrl reg 9 */ 35#define MCFSIM_ICR10 (MCF_MBAR + 0x1d) /* Intr Ctrl reg 10 */ 36#define MCFSIM_ICR11 (MCF_MBAR + 0x1e) /* Intr Ctrl reg 11 */ 37#define MCFSIM_ICR12 (MCF_MBAR + 0x1f) /* Intr Ctrl reg 12 */ 38#define MCFSIM_ICR13 (MCF_MBAR + 0x20) /* Intr Ctrl reg 13 */ 39#ifdef CONFIG_M5206e 40#define MCFSIM_ICR14 (MCF_MBAR + 0x21) /* Intr Ctrl reg 14 */ 41#define MCFSIM_ICR15 (MCF_MBAR + 0x22) /* Intr Ctrl reg 15 */ 42#endif 43 44#define MCFSIM_IMR (MCF_MBAR + 0x36) /* Interrupt Mask */ 45#define MCFSIM_IPR (MCF_MBAR + 0x3a) /* Interrupt Pending */ 46 47#define MCFSIM_RSR (MCF_MBAR + 0x40) /* Reset Status */ 48#define MCFSIM_SYPCR (MCF_MBAR + 0x41) /* System Protection */ 49 50#define MCFSIM_SWIVR (MCF_MBAR + 0x42) /* SW Watchdog intr */ 51#define MCFSIM_SWSR (MCF_MBAR + 0x43) /* SW Watchdog srv */ 52 53#define MCFSIM_DCRR (MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */ 54#define MCFSIM_DCTR (MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */ 55#define MCFSIM_DAR0 (MCF_MBAR + 0x4c) /* DRAM 0 Address reg(r/w) */ 56#define MCFSIM_DMR0 (MCF_MBAR + 0x50) /* DRAM 0 Mask reg (r/w) */ 57#define MCFSIM_DCR0 (MCF_MBAR + 0x57) /* DRAM 0 Control reg (r/w) */ 58#define MCFSIM_DAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address reg (r/w) */ 59#define MCFSIM_DMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */ 60#define MCFSIM_DCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */ 61 62#define MCFSIM_CSAR0 (MCF_MBAR + 0x64) /* CS 0 Address reg */ 63#define MCFSIM_CSMR0 (MCF_MBAR + 0x68) /* CS 0 Mask reg */ 64#define MCFSIM_CSCR0 (MCF_MBAR + 0x6e) /* CS 0 Control reg */ 65#define MCFSIM_CSAR1 (MCF_MBAR + 0x70) /* CS 1 Address reg */ 66#define MCFSIM_CSMR1 (MCF_MBAR + 0x74) /* CS 1 Mask reg */ 67#define MCFSIM_CSCR1 (MCF_MBAR + 0x7a) /* CS 1 Control reg */ 68#define MCFSIM_CSAR2 (MCF_MBAR + 0x7c) /* CS 2 Address reg */ 69#define MCFSIM_CSMR2 (MCF_MBAR + 0x80) /* CS 2 Mask reg */ 70#define MCFSIM_CSCR2 (MCF_MBAR + 0x86) /* CS 2 Control reg */ 71#define MCFSIM_CSAR3 (MCF_MBAR + 0x88) /* CS 3 Address reg */ 72#define MCFSIM_CSMR3 (MCF_MBAR + 0x8c) /* CS 3 Mask reg */ 73#define MCFSIM_CSCR3 (MCF_MBAR + 0x92) /* CS 3 Control reg */ 74#define MCFSIM_CSAR4 (MCF_MBAR + 0x94) /* CS 4 Address reg */ 75#define MCFSIM_CSMR4 (MCF_MBAR + 0x98) /* CS 4 Mask reg */ 76#define MCFSIM_CSCR4 (MCF_MBAR + 0x9e) /* CS 4 Control reg */ 77#define MCFSIM_CSAR5 (MCF_MBAR + 0xa0) /* CS 5 Address reg */ 78#define MCFSIM_CSMR5 (MCF_MBAR + 0xa4) /* CS 5 Mask reg */ 79#define MCFSIM_CSCR5 (MCF_MBAR + 0xaa) /* CS 5 Control reg */ 80#define MCFSIM_CSAR6 (MCF_MBAR + 0xac) /* CS 6 Address reg */ 81#define MCFSIM_CSMR6 (MCF_MBAR + 0xb0) /* CS 6 Mask reg */ 82#define MCFSIM_CSCR6 (MCF_MBAR + 0xb6) /* CS 6 Control reg */ 83#define MCFSIM_CSAR7 (MCF_MBAR + 0xb8) /* CS 7 Address reg */ 84#define MCFSIM_CSMR7 (MCF_MBAR + 0xbc) /* CS 7 Mask reg */ 85#define MCFSIM_CSCR7 (MCF_MBAR + 0xc2) /* CS 7 Control reg */ 86#define MCFSIM_DMCR (MCF_MBAR + 0xc6) /* Default control */ 87 88#ifdef CONFIG_M5206e 89#define MCFSIM_PAR (MCF_MBAR + 0xca) /* Pin Assignment */ 90#else 91#define MCFSIM_PAR (MCF_MBAR + 0xcb) /* Pin Assignment */ 92#endif 93 94#define MCFTIMER_BASE1 (MCF_MBAR + 0x100) /* Base of TIMER1 */ 95#define MCFTIMER_BASE2 (MCF_MBAR + 0x120) /* Base of TIMER2 */ 96 97#define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */ 98#define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */ 99 100#define MCFDMA_BASE0 (MCF_MBAR + 0x200) /* Base address DMA 0 */ 101#define MCFDMA_BASE1 (MCF_MBAR + 0x240) /* Base address DMA 1 */ 102 103#if defined(CONFIG_NETtel) 104#define MCFUART_BASE0 (MCF_MBAR + 0x180) /* Base address UART0 */ 105#define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */ 106#else 107#define MCFUART_BASE0 (MCF_MBAR + 0x140) /* Base address UART0 */ 108#define MCFUART_BASE1 (MCF_MBAR + 0x180) /* Base address UART1 */ 109#endif 110 111/* 112 * Define system peripheral IRQ usage. 113 */ 114#define MCF_IRQ_I2C0 29 /* I2C, Level 5 */ 115#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */ 116#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */ 117#define MCF_IRQ_UART0 73 /* UART0 */ 118#define MCF_IRQ_UART1 74 /* UART1 */ 119 120/* 121 * Generic GPIO 122 */ 123#define MCFGPIO_PIN_MAX 8 124#define MCFGPIO_IRQ_VECBASE -1 125#define MCFGPIO_IRQ_MAX -1 126 127/* 128 * Some symbol defines for the Parallel Port Pin Assignment Register 129 */ 130#ifdef CONFIG_M5206e 131#define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */ 132 /* Clear to select T0 input */ 133#define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */ 134 /* Clear to select T0 output */ 135#endif 136 137/* 138 * Some symbol defines for the Interrupt Control Register 139 */ 140#define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */ 141#define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */ 142#define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */ 143#define MCFSIM_I2CICR MCFSIM_ICR11 /* I2C ICR */ 144#define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */ 145#define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */ 146#ifdef CONFIG_M5206e 147#define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */ 148#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ 149#endif 150 151/* 152 * I2C Controller 153*/ 154#define MCFI2C_BASE0 (MCF_MBAR + 0x1e0) 155#define MCFI2C_SIZE0 0x40 156 157/****************************************************************************/ 158#endif /* m5206sim_h */ 159