1// SPDX-License-Identifier: GPL-2.0
2/*
3 * WinLink E850-96 board device tree source
4 *
5 * Copyright (C) 2018 Samsung Electronics Co., Ltd.
6 * Copyright (C) 2021 Linaro Ltd.
7 *
8 * Device tree source file for WinLink's E850-96 board which is based on
9 * Samsung Exynos850 SoC.
10 */
11
12/dts-v1/;
13
14#include "exynos850.dtsi"
15#include <dt-bindings/gpio/gpio.h>
16#include <dt-bindings/input/input.h>
17#include <dt-bindings/leds/common.h>
18
19/ {
20	model = "WinLink E850-96 board";
21	compatible = "winlink,e850-96", "samsung,exynos850";
22
23	aliases {
24		mmc0 = &mmc_0;
25		serial0 = &serial_0;
26	};
27
28	chosen {
29		stdout-path = &serial_0;
30	};
31
32	connector {
33		compatible = "gpio-usb-b-connector", "usb-b-connector";
34		label = "micro-USB";
35		type = "micro";
36		vbus-supply = <&reg_usb_host_vbus>;
37		id-gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
38		pinctrl-names = "default";
39		pinctrl-0 = <&micro_usb_det_pins>;
40
41		port {
42			usb_dr_connector: endpoint {
43				remote-endpoint = <&usb1_drd_sw>;
44			};
45		};
46	};
47
48	/*
49	 * RAM: 4 GiB (eMCP):
50	 *   - 2 GiB at 0x80000000
51	 *   - 2 GiB at 0x880000000
52	 *
53	 * 0xbab00000..0xbfffffff: secure memory (85 MiB).
54	 */
55	memory@80000000 {
56		device_type = "memory";
57		reg = <0x0 0x80000000 0x3ab00000>,
58		      <0x0 0xc0000000 0x40000000>,
59		      <0x8 0x80000000 0x80000000>;
60	};
61
62	gpio-keys {
63		compatible = "gpio-keys";
64		pinctrl-names = "default";
65		pinctrl-0 = <&key_voldown_pins &key_volup_pins>;
66
67		volume-down-key {
68			label = "Volume Down";
69			linux,code = <KEY_VOLUMEDOWN>;
70			gpios = <&gpa1 0 GPIO_ACTIVE_LOW>;
71		};
72
73		volume-up-key {
74			label = "Volume Up";
75			linux,code = <KEY_VOLUMEUP>;
76			gpios = <&gpa0 7 GPIO_ACTIVE_LOW>;
77		};
78	};
79
80	leds {
81		compatible = "gpio-leds";
82
83		/* HEART_BEAT_LED */
84		user_led1: led-1 {
85			label = "yellow:user1";
86			gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>;
87			color = <LED_COLOR_ID_YELLOW>;
88			function = LED_FUNCTION_HEARTBEAT;
89			linux,default-trigger = "heartbeat";
90		};
91
92		/* eMMC_LED */
93		user_led2: led-2 {
94			label = "yellow:user2";
95			gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>;
96			color = <LED_COLOR_ID_YELLOW>;
97			linux,default-trigger = "mmc0";
98		};
99
100		/* SD_LED */
101		user_led3: led-3 {
102			label = "white:user3";
103			gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>;
104			color = <LED_COLOR_ID_WHITE>;
105			function = LED_FUNCTION_SD;
106			linux,default-trigger = "mmc2";
107		};
108
109		/* WIFI_LED */
110		wlan_active_led: led-4 {
111			label = "yellow:wlan";
112			gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>;
113			color = <LED_COLOR_ID_YELLOW>;
114			function = LED_FUNCTION_WLAN;
115			linux,default-trigger = "phy0tx";
116			default-state = "off";
117		};
118
119		/* BLUETOOTH_LED */
120		bt_active_led: led-5 {
121			label = "blue:bt";
122			gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
123			color = <LED_COLOR_ID_BLUE>;
124			function = LED_FUNCTION_BLUETOOTH;
125			linux,default-trigger = "hci0-power";
126			default-state = "off";
127		};
128	};
129
130	/* TODO: Remove this once PMIC is implemented  */
131	reg_dummy: regulator-0 {
132		compatible = "regulator-fixed";
133		regulator-name = "dummy_reg";
134	};
135
136	reg_usb_host_vbus: regulator-1 {
137		compatible = "regulator-fixed";
138		regulator-name = "usb_host_vbus";
139		regulator-min-microvolt = <5000000>;
140		regulator-max-microvolt = <5000000>;
141		gpio = <&gpa3 5 GPIO_ACTIVE_LOW>;
142	};
143
144	reserved-memory {
145		#address-cells = <2>;
146		#size-cells = <1>;
147		ranges;
148
149		ramoops@f0000000 {
150			compatible = "ramoops";
151			reg = <0x0 0xf0000000 0x200000>;
152			record-size = <0x20000>;
153			console-size = <0x20000>;
154			ftrace-size = <0x100000>;
155			pmsg-size = <0x20000>;
156		};
157	};
158
159	/*
160	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
161	 *
162	 * TODO: Remove this once RTC clock is implemented properly as part of
163	 *       PMIC driver.
164	 */
165	rtcclk: clock-rtcclk {
166		compatible = "fixed-clock";
167		clock-output-names = "rtcclk";
168		#clock-cells = <0>;
169		clock-frequency = <32768>;
170	};
171};
172
173&cmu_hsi {
174	clocks = <&oscclk>, <&rtcclk>,
175		 <&cmu_top CLK_DOUT_HSI_BUS>,
176		 <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
177		 <&cmu_top CLK_DOUT_HSI_USB20DRD>;
178	clock-names = "oscclk", "rtcclk", "dout_hsi_bus",
179		      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
180};
181
182&mmc_0 {
183	status = "okay";
184	mmc-hs200-1_8v;
185	mmc-hs400-1_8v;
186	cap-mmc-highspeed;
187	non-removable;
188	mmc-hs400-enhanced-strobe;
189	card-detect-delay = <200>;
190	clock-frequency = <800000000>;
191	bus-width = <8>;
192	samsung,dw-mshc-ciu-div = <3>;
193	samsung,dw-mshc-sdr-timing = <0 4>;
194	samsung,dw-mshc-ddr-timing = <2 4>;
195	samsung,dw-mshc-hs400-timing = <0 2>;
196
197	pinctrl-names = "default";
198	pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins
199		     &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>;
200};
201
202&oscclk {
203	clock-frequency = <26000000>;
204};
205
206&pinctrl_alive {
207	key_voldown_pins: key-voldown-pins {
208		samsung,pins = "gpa1-0";
209		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
210		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
211		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
212	};
213
214	key_volup_pins: key-volup-pins {
215		samsung,pins = "gpa0-7";
216		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
217		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
218		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
219	};
220
221	micro_usb_det_pins: micro-usb-det-pins {
222		samsung,pins = "gpa0-0";
223		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
224		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
225	};
226};
227
228&rtc {
229	status = "okay";
230	clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>;
231	clock-names = "rtc", "rtc_src";
232};
233
234&serial_0 {
235	status = "okay";
236	pinctrl-names = "default";
237	pinctrl-0 = <&uart1_pins>;
238};
239
240&usbdrd {
241	status = "okay";
242	vdd10-supply = <&reg_dummy>;
243	vdd33-supply = <&reg_dummy>;
244};
245
246&usbdrd_dwc3 {
247	dr_mode = "otg";
248	usb-role-switch;
249	role-switch-default-mode = "host";
250
251	port {
252		usb1_drd_sw: endpoint {
253			remote-endpoint = <&usb_dr_connector>;
254		};
255	};
256};
257
258&usbdrd_phy {
259	status = "okay";
260};
261
262&usi_uart {
263	samsung,clkreq-on; /* needed for UART mode */
264	status = "okay";
265};
266
267&watchdog_cl0 {
268	status = "okay";
269};
270
271&watchdog_cl1 {
272	status = "okay";
273};
274