1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 Andreas F��rber
4 */
5
6#include <dt-bindings/clock/actions,s700-cmu.h>
7#include <dt-bindings/interrupt-controller/arm-gic.h>
8#include <dt-bindings/power/owl-s700-powergate.h>
9#include <dt-bindings/reset/actions,s700-reset.h>
10
11/ {
12	compatible = "actions,s700";
13	interrupt-parent = <&gic>;
14	#address-cells = <2>;
15	#size-cells = <2>;
16
17	cpus {
18		#address-cells = <2>;
19		#size-cells = <0>;
20
21		cpu0: cpu@0 {
22			device_type = "cpu";
23			compatible = "arm,cortex-a53";
24			reg = <0x0 0x0>;
25			enable-method = "psci";
26		};
27
28		cpu1: cpu@1 {
29			device_type = "cpu";
30			compatible = "arm,cortex-a53";
31			reg = <0x0 0x1>;
32			enable-method = "psci";
33		};
34
35		cpu2: cpu@2 {
36			device_type = "cpu";
37			compatible = "arm,cortex-a53";
38			reg = <0x0 0x2>;
39			enable-method = "psci";
40		};
41
42		cpu3: cpu@3 {
43			device_type = "cpu";
44			compatible = "arm,cortex-a53";
45			reg = <0x0 0x3>;
46			enable-method = "psci";
47		};
48	};
49
50	reserved-memory {
51		#address-cells = <2>;
52		#size-cells = <2>;
53		ranges;
54
55		secmon@1f000000 {
56			reg = <0x0 0x1f000000 0x0 0x1000000>;
57			no-map;
58		};
59	};
60
61	psci {
62		compatible = "arm,psci-0.2";
63		method = "smc";
64	};
65
66	arm-pmu {
67		compatible = "arm,cortex-a53-pmu";
68		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
69		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
70		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
71		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
72		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
73	};
74
75	timer {
76		compatible = "arm,armv8-timer";
77		interrupts = <GIC_PPI 13
78			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
79			     <GIC_PPI 14
80			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
81			     <GIC_PPI 11
82			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
83			     <GIC_PPI 10
84			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
85	};
86
87	hosc: hosc {
88		compatible = "fixed-clock";
89		clock-frequency = <24000000>;
90		#clock-cells = <0>;
91	};
92
93	losc: losc {
94		compatible = "fixed-clock";
95		clock-frequency = <32768>;
96		#clock-cells = <0>;
97	};
98
99	soc {
100		compatible = "simple-bus";
101		#address-cells = <2>;
102		#size-cells = <2>;
103		ranges;
104
105		gic: interrupt-controller@e00f1000 {
106			compatible = "arm,gic-400";
107			reg = <0x0 0xe00f1000 0x0 0x1000>,
108			      <0x0 0xe00f2000 0x0 0x2000>,
109			      <0x0 0xe00f4000 0x0 0x2000>,
110			      <0x0 0xe00f6000 0x0 0x2000>;
111			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
112			interrupt-controller;
113			#interrupt-cells = <3>;
114		};
115
116		uart0: serial@e0120000 {
117			compatible = "actions,s900-uart", "actions,owl-uart";
118			reg = <0x0 0xe0120000 0x0 0x2000>;
119			clocks = <&cmu CLK_UART0>;
120			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
121			status = "disabled";
122		};
123
124		uart1: serial@e0122000 {
125			compatible = "actions,s900-uart", "actions,owl-uart";
126			reg = <0x0 0xe0122000 0x0 0x2000>;
127			clocks = <&cmu CLK_UART1>;
128			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
129			status = "disabled";
130		};
131
132		uart2: serial@e0124000 {
133			compatible = "actions,s900-uart", "actions,owl-uart";
134			reg = <0x0 0xe0124000 0x0 0x2000>;
135			clocks = <&cmu CLK_UART2>;
136			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
137			status = "disabled";
138		};
139
140		uart3: serial@e0126000 {
141			compatible = "actions,s900-uart", "actions,owl-uart";
142			reg = <0x0 0xe0126000 0x0 0x2000>;
143			clocks = <&cmu CLK_UART3>;
144			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
145			status = "disabled";
146		};
147
148		uart4: serial@e0128000 {
149			compatible = "actions,s900-uart", "actions,owl-uart";
150			reg = <0x0 0xe0128000 0x0 0x2000>;
151			clocks = <&cmu CLK_UART4>;
152			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
153			status = "disabled";
154		};
155
156		uart5: serial@e012a000 {
157			compatible = "actions,s900-uart", "actions,owl-uart";
158			reg = <0x0 0xe012a000 0x0 0x2000>;
159			clocks = <&cmu CLK_UART5>;
160			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
161			status = "disabled";
162		};
163
164		uart6: serial@e012c000 {
165			compatible = "actions,s900-uart", "actions,owl-uart";
166			reg = <0x0 0xe012c000 0x0 0x2000>;
167			clocks = <&cmu CLK_UART6>;
168			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
169			status = "disabled";
170		};
171
172		cmu: clock-controller@e0168000 {
173			compatible = "actions,s700-cmu";
174			reg = <0x0 0xe0168000 0x0 0x1000>;
175			clocks = <&hosc>, <&losc>;
176			#clock-cells = <1>;
177			#reset-cells = <1>;
178		};
179
180		i2c0: i2c@e0170000 {
181			compatible = "actions,s700-i2c";
182			reg = <0 0xe0170000 0 0x1000>;
183			clocks = <&cmu CLK_I2C0>;
184			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
185			#address-cells = <1>;
186			#size-cells = <0>;
187			status = "disabled";
188		};
189
190		i2c1: i2c@e0174000 {
191			compatible = "actions,s700-i2c";
192			reg = <0 0xe0174000 0 0x1000>;
193			clocks = <&cmu CLK_I2C1>;
194			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
195			#address-cells = <1>;
196			#size-cells = <0>;
197			status = "disabled";
198		};
199
200		i2c2: i2c@e0178000 {
201			compatible = "actions,s700-i2c";
202			reg = <0 0xe0178000 0 0x1000>;
203			clocks = <&cmu CLK_I2C2>;
204			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
205			#address-cells = <1>;
206			#size-cells = <0>;
207			status = "disabled";
208		};
209
210		i2c3: i2c@e017c000 {
211			compatible = "actions,s700-i2c";
212			reg = <0 0xe017c000 0 0x1000>;
213			clocks = <&cmu CLK_I2C3>;
214			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
215			#address-cells = <1>;
216			#size-cells = <0>;
217			status = "disabled";
218		};
219
220		sps: power-controller@e01b0100 {
221			compatible = "actions,s700-sps";
222			reg = <0x0 0xe01b0100 0x0 0x100>;
223			#power-domain-cells = <1>;
224		};
225
226		timer: timer@e024c000 {
227			compatible = "actions,s700-timer";
228			reg = <0x0 0xe024c000 0x0 0x4000>;
229			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
230			interrupt-names = "timer1";
231		};
232
233		pinctrl: pinctrl@e01b0000 {
234			compatible = "actions,s700-pinctrl";
235			reg = <0x0 0xe01b0000 0x0 0x100>;
236			clocks = <&cmu CLK_GPIO>;
237			gpio-controller;
238			gpio-ranges = <&pinctrl 0 0 136>;
239			#gpio-cells = <2>;
240			interrupt-controller;
241			#interrupt-cells = <2>;
242			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
243				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
244				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
245				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
246				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
247		};
248
249		dma: dma-controller@e0230000 {
250			compatible = "actions,s700-dma";
251			reg = <0x0 0xe0230000 0x0 0x1000>;
252			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
253				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
254				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
255				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
256			#dma-cells = <1>;
257			dma-channels = <10>;
258			dma-requests = <44>;
259			clocks = <&cmu CLK_DMAC>;
260			power-domains = <&sps S700_PD_DMA>;
261		};
262	};
263};
264