1// SPDX-License-Identifier: GPL-2.0
2//
3// Copyright (c) 2008 Simtec Electronics
4//	Ben Dooks <ben@simtec.co.uk>
5//	http://armlinux.simtec.co.uk/
6//
7// S3C series CPU initialisation
8
9/*
10 * NOTE: Code in this file is not used on S3C64xx when booting with
11 * Device Tree support.
12 */
13
14#include <linux/init.h>
15#include <linux/module.h>
16#include <linux/interrupt.h>
17#include <linux/ioport.h>
18#include <linux/serial_core.h>
19#include <linux/serial_s3c.h>
20#include <linux/platform_device.h>
21#include <linux/of.h>
22
23#include <asm/mach/arch.h>
24#include <asm/mach/map.h>
25
26#include "cpu.h"
27#include "devs.h"
28
29static struct cpu_table *cpu;
30
31static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
32						struct cpu_table *tab,
33						unsigned int count)
34{
35	for (; count != 0; count--, tab++) {
36		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
37			return tab;
38	}
39
40	return NULL;
41}
42
43void __init s3c_init_cpu(unsigned long idcode,
44			 struct cpu_table *cputab, unsigned int cputab_size)
45{
46	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
47
48	if (cpu == NULL) {
49		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
50		panic("Unknown S3C24XX CPU");
51	}
52
53	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
54
55	if (cpu->init == NULL) {
56		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
57		panic("Unsupported Samsung CPU");
58	}
59
60	if (cpu->map_io)
61		cpu->map_io();
62
63	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
64}
65
66/* uart management */
67#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
68static int nr_uarts __initdata = 0;
69
70#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
71static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
72#endif
73
74/* s3c24xx_init_uartdevs
75 *
76 * copy the specified platform data and configuration into our central
77 * set of devices, before the data is thrown away after the init process.
78 *
79 * This also fills in the array passed to the serial driver for the
80 * early initialisation of the console.
81*/
82
83void __init s3c24xx_init_uartdevs(char *name,
84				  struct s3c24xx_uart_resources *res,
85				  struct s3c2410_uartcfg *cfg, int no)
86{
87#ifdef CONFIG_SERIAL_SAMSUNG_UARTS
88	struct platform_device *platdev;
89	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
90	struct s3c24xx_uart_resources *resp;
91	int uart;
92
93	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
94
95	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
96		platdev = s3c24xx_uart_src[cfgptr->hwport];
97
98		resp = res + cfgptr->hwport;
99
100		s3c24xx_uart_devs[uart] = platdev;
101
102		platdev->name = name;
103		platdev->resource = resp->resources;
104		platdev->num_resources = resp->nr_resources;
105
106		platdev->dev.platform_data = cfgptr;
107	}
108
109	nr_uarts = no;
110#endif
111}
112
113void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
114{
115	if (cpu == NULL)
116		return;
117
118	if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) {
119		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
120	} else
121		(cpu->init_uarts)(cfg, no);
122}
123#endif
124
125static int __init s3c_arch_init(void)
126{
127	int ret;
128
129	/* init is only needed for ATAGS based platforms */
130	if (!IS_ENABLED(CONFIG_ATAGS))
131		return 0;
132
133	// do the correct init for cpu
134
135	if (cpu == NULL) {
136		/* Not needed when booting with device tree. */
137		if (of_have_populated_dt())
138			return 0;
139		panic("s3c_arch_init: NULL cpu\n");
140	}
141
142	ret = (cpu->init)();
143	if (ret != 0)
144		return ret;
145#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
146	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
147#endif
148	return ret;
149}
150
151arch_initcall(s3c_arch_init);
152