1/* SPDX-License-Identifier: GPL-2.0-only */
2/* arch/arm/include/debug/sa1100.S
3 *
4 * Debugging macro include header
5 *
6 *  Copyright (C) 1994-1999 Russell King
7 *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
8*/
9
10#define UTCR3		0x0c
11#define UTDR		0x14
12#define UTSR1		0x20
13#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
14#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
15#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
16
17		.macro	addruart, rp, rv, tmp
18		mrc	p15, 0, \rp, c1, c0
19		tst	\rp, #1			@ MMU enabled?
20		moveq	\rp, #0x80000000	@ physical base address
21		movne	\rp, #0xf8000000	@ virtual address
22
23		@ We probe for the active serial port here, coherently with
24		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
25		@ We assume r1 can be clobbered.
26
27		@ see if Ser3 is active
28		add	\rp, \rp, #0x00050000
29		ldr	\rv, [\rp, #UTCR3]
30		tst	\rv, #UTCR3_TXE
31
32		@ if Ser3 is inactive, then try Ser1
33		addeq	\rp, \rp, #(0x00010000 - 0x00050000)
34		ldreq	\rv, [\rp, #UTCR3]
35		tsteq	\rv, #UTCR3_TXE
36
37		@ if Ser1 is inactive, then try Ser2
38		addeq	\rp, \rp, #(0x00030000 - 0x00010000)
39		ldreq	\rv, [\rp, #UTCR3]
40		tsteq	\rv, #UTCR3_TXE
41
42		@ clear top bits, and generate both phys and virt addresses
43		lsl	\rp, \rp, #8
44		lsr	\rp, \rp, #8
45		orr	\rv, \rp, #0xf8000000	@ virtual
46		orr	\rp, \rp, #0x80000000	@ physical
47
48		.endm
49
50		.macro	senduart,rd,rx
51		str	\rd, [\rx, #UTDR]
52		.endm
53
54		.macro	waituartcts,rd,rx
55		.endm
56
57		.macro	waituarttxrdy,rd,rx
581001:		ldr	\rd, [\rx, #UTSR1]
59		tst	\rd, #UTSR1_TNF
60		beq	1001b
61		.endm
62
63		.macro	busyuart,rd,rx
641001:		ldr	\rd, [\rx, #UTSR1]
65		tst	\rd, #UTSR1_TBY
66		bne	1001b
67		.endm
68