1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Koelsch board
4 *
5 * Copyright (C) 2013 Renesas Electronics Corporation
6 * Copyright (C) 2013-2014 Renesas Solutions Corp.
7 * Copyright (C) 2014 Cogent Embedded, Inc.
8 */
9
10/*
11 * SSI-AK4643
12 *
13 * SW1: 1: AK4643
14 *      2: CN22
15 *      3: ADV7511
16 *
17 * This command is required when Playback/Capture
18 *
19 *	amixer set "LINEOUT Mixer DACL" on
20 *	amixer set "DVC Out" 100%
21 *	amixer set "DVC In" 100%
22 *
23 * You can use Mute
24 *
25 *	amixer set "DVC Out Mute" on
26 *	amixer set "DVC In Mute" on
27 *
28 * You can use Volume Ramp
29 *
30 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
31 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
32 *	amixer set "DVC Out Ramp" on
33 *	aplay xxx.wav &
34 *	amixer set "DVC Out"  80%  // Volume Down
35 *	amixer set "DVC Out" 100%  // Volume Up
36 */
37
38/dts-v1/;
39#include "r8a7791.dtsi"
40#include <dt-bindings/gpio/gpio.h>
41#include <dt-bindings/input/input.h>
42
43/ {
44	model = "Koelsch";
45	compatible = "renesas,koelsch", "renesas,r8a7791";
46
47	aliases {
48		serial0 = &scif0;
49		serial1 = &scif1;
50		i2c9 = &gpioi2c1;
51		i2c10 = &gpioi2c2;
52		i2c11 = &gpioi2c4;
53		i2c12 = &i2cexio1;
54		i2c13 = &i2chdmi;
55		i2c14 = &i2cexio4;
56		mmc0 = &sdhi0;
57		mmc1 = &sdhi1;
58		mmc2 = &sdhi2;
59	};
60
61	chosen {
62		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
63		stdout-path = "serial0:115200n8";
64	};
65
66	memory@40000000 {
67		device_type = "memory";
68		reg = <0 0x40000000 0 0x40000000>;
69	};
70
71	memory@200000000 {
72		device_type = "memory";
73		reg = <2 0x00000000 0 0x40000000>;
74	};
75
76	keyboard {
77		compatible = "gpio-keys";
78
79		pinctrl-0 = <&keyboard_pins>;
80		pinctrl-names = "default";
81
82		key-1 {
83			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
84			linux,code = <KEY_1>;
85			label = "SW2-1";
86			wakeup-source;
87			debounce-interval = <20>;
88		};
89		key-2 {
90			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
91			linux,code = <KEY_2>;
92			label = "SW2-2";
93			wakeup-source;
94			debounce-interval = <20>;
95		};
96		key-3 {
97			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
98			linux,code = <KEY_3>;
99			label = "SW2-3";
100			wakeup-source;
101			debounce-interval = <20>;
102		};
103		key-4 {
104			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
105			linux,code = <KEY_4>;
106			label = "SW2-4";
107			wakeup-source;
108			debounce-interval = <20>;
109		};
110		key-a {
111			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
112			linux,code = <KEY_A>;
113			label = "SW30";
114			wakeup-source;
115			debounce-interval = <20>;
116		};
117		key-b {
118			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
119			linux,code = <KEY_B>;
120			label = "SW31";
121			wakeup-source;
122			debounce-interval = <20>;
123		};
124		key-c {
125			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
126			linux,code = <KEY_C>;
127			label = "SW32";
128			wakeup-source;
129			debounce-interval = <20>;
130		};
131		key-d {
132			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
133			linux,code = <KEY_D>;
134			label = "SW33";
135			wakeup-source;
136			debounce-interval = <20>;
137		};
138		key-e {
139			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
140			linux,code = <KEY_E>;
141			label = "SW34";
142			wakeup-source;
143			debounce-interval = <20>;
144		};
145		key-f {
146			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
147			linux,code = <KEY_F>;
148			label = "SW35";
149			wakeup-source;
150			debounce-interval = <20>;
151		};
152		key-g {
153			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
154			linux,code = <KEY_G>;
155			label = "SW36";
156			wakeup-source;
157			debounce-interval = <20>;
158		};
159	};
160
161	leds {
162		compatible = "gpio-leds";
163		led6 {
164			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
165			label = "LED6";
166		};
167		led7 {
168			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
169			label = "LED7";
170		};
171		led8 {
172			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
173			label = "LED8";
174		};
175	};
176
177	reg_1p8v: regulator-1v8 {
178		compatible = "regulator-fixed";
179		regulator-name = "fixed-1.8V";
180		regulator-min-microvolt = <1800000>;
181		regulator-max-microvolt = <1800000>;
182		regulator-boot-on;
183		regulator-always-on;
184	};
185
186	reg_3p3v: regulator-3v3 {
187		compatible = "regulator-fixed";
188		regulator-name = "fixed-3.3V";
189		regulator-min-microvolt = <3300000>;
190		regulator-max-microvolt = <3300000>;
191		regulator-boot-on;
192		regulator-always-on;
193	};
194
195	vcc_sdhi0: regulator-vcc-sdhi0 {
196		compatible = "regulator-fixed";
197
198		regulator-name = "SDHI0 Vcc";
199		regulator-min-microvolt = <3300000>;
200		regulator-max-microvolt = <3300000>;
201
202		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
203		enable-active-high;
204	};
205
206	vccq_sdhi0: regulator-vccq-sdhi0 {
207		compatible = "regulator-gpio";
208
209		regulator-name = "SDHI0 VccQ";
210		regulator-min-microvolt = <1800000>;
211		regulator-max-microvolt = <3300000>;
212
213		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
214		gpios-states = <1>;
215		states = <3300000 1>, <1800000 0>;
216	};
217
218	vcc_sdhi1: regulator-vcc-sdhi1 {
219		compatible = "regulator-fixed";
220
221		regulator-name = "SDHI1 Vcc";
222		regulator-min-microvolt = <3300000>;
223		regulator-max-microvolt = <3300000>;
224
225		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
226		enable-active-high;
227	};
228
229	vccq_sdhi1: regulator-vccq-sdhi1 {
230		compatible = "regulator-gpio";
231
232		regulator-name = "SDHI1 VccQ";
233		regulator-min-microvolt = <1800000>;
234		regulator-max-microvolt = <3300000>;
235
236		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
237		gpios-states = <1>;
238		states = <3300000 1>, <1800000 0>;
239	};
240
241	vcc_sdhi2: regulator-vcc-sdhi2 {
242		compatible = "regulator-fixed";
243
244		regulator-name = "SDHI2 Vcc";
245		regulator-min-microvolt = <3300000>;
246		regulator-max-microvolt = <3300000>;
247
248		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
249		enable-active-high;
250	};
251
252	vccq_sdhi2: regulator-vccq-sdhi2 {
253		compatible = "regulator-gpio";
254
255		regulator-name = "SDHI2 VccQ";
256		regulator-min-microvolt = <1800000>;
257		regulator-max-microvolt = <3300000>;
258
259		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
260		gpios-states = <1>;
261		states = <3300000 1>, <1800000 0>;
262	};
263
264	audio_clock: audio_clock {
265		compatible = "fixed-clock";
266		#clock-cells = <0>;
267		clock-frequency = <11289600>;
268	};
269
270	rsnd_ak4643: sound {
271		compatible = "simple-audio-card";
272
273		simple-audio-card,format = "left_j";
274		simple-audio-card,bitclock-master = <&sndcodec>;
275		simple-audio-card,frame-master = <&sndcodec>;
276
277		sndcpu: simple-audio-card,cpu {
278			sound-dai = <&rcar_sound>;
279		};
280
281		sndcodec: simple-audio-card,codec {
282			sound-dai = <&ak4643>;
283			clocks = <&audio_clock>;
284		};
285	};
286
287	hdmi-in {
288		compatible = "hdmi-connector";
289		type = "a";
290
291		port {
292			hdmi_con_in: endpoint {
293				remote-endpoint = <&adv7612_in>;
294			};
295		};
296	};
297
298	cec_clock: cec-clock {
299		compatible = "fixed-clock";
300		#clock-cells = <0>;
301		clock-frequency = <12000000>;
302	};
303
304	hdmi-out {
305		compatible = "hdmi-connector";
306		type = "a";
307
308		port {
309			hdmi_con_out: endpoint {
310				remote-endpoint = <&adv7511_out>;
311			};
312		};
313	};
314
315	x2_clk: x2-clock {
316		compatible = "fixed-clock";
317		#clock-cells = <0>;
318		clock-frequency = <74250000>;
319	};
320
321	x13_clk: x13-clock {
322		compatible = "fixed-clock";
323		#clock-cells = <0>;
324		clock-frequency = <148500000>;
325	};
326
327	gpioi2c1: i2c-9 {
328		#address-cells = <1>;
329		#size-cells = <0>;
330		compatible = "i2c-gpio";
331		status = "disabled";
332		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
333		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
334		i2c-gpio,delay-us = <5>;
335	};
336
337	gpioi2c2: i2c-10 {
338		#address-cells = <1>;
339		#size-cells = <0>;
340		compatible = "i2c-gpio";
341		status = "disabled";
342		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
343		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
344		i2c-gpio,delay-us = <5>;
345	};
346
347	gpioi2c4: i2c-11 {
348		#address-cells = <1>;
349		#size-cells = <0>;
350		compatible = "i2c-gpio";
351		status = "disabled";
352		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
353		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
354		i2c-gpio,delay-us = <5>;
355	};
356
357	/*
358	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
359	 * A fallback to GPIO is provided.
360	 */
361	i2cexio1: i2c-mux1 {
362		compatible = "i2c-demux-pinctrl";
363		i2c-parent = <&i2c1>, <&gpioi2c1>;
364		i2c-bus-name = "i2c-exio1";
365		#address-cells = <1>;
366		#size-cells = <0>;
367	};
368
369	/*
370	 * A fallback to GPIO is provided for I2C2.
371	 */
372	i2chdmi: i2c-mux2 {
373		compatible = "i2c-demux-pinctrl";
374		i2c-parent = <&i2c2>, <&gpioi2c2>;
375		i2c-bus-name = "i2c-hdmi";
376		#address-cells = <1>;
377		#size-cells = <0>;
378
379		ak4643: codec@12 {
380			compatible = "asahi-kasei,ak4643";
381			#sound-dai-cells = <0>;
382			reg = <0x12>;
383		};
384
385		composite-in@20 {
386			compatible = "adi,adv7180";
387			reg = <0x20>;
388
389			port {
390				adv7180: endpoint {
391					bus-width = <8>;
392					remote-endpoint = <&vin1ep>;
393				};
394			};
395		};
396
397		hdmi@39 {
398			compatible = "adi,adv7511w";
399			reg = <0x39>;
400			interrupt-parent = <&gpio3>;
401			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
402			clocks = <&cec_clock>;
403			clock-names = "cec";
404
405			avdd-supply = <&reg_1p8v>;
406			dvdd-supply = <&reg_1p8v>;
407			pvdd-supply = <&reg_1p8v>;
408			dvdd-3v-supply = <&reg_3p3v>;
409			bgvdd-supply = <&reg_1p8v>;
410
411			adi,input-depth = <8>;
412			adi,input-colorspace = "rgb";
413			adi,input-clock = "1x";
414
415			ports {
416				#address-cells = <1>;
417				#size-cells = <0>;
418
419				port@0 {
420					reg = <0>;
421					adv7511_in: endpoint {
422						remote-endpoint = <&du_out_rgb>;
423					};
424				};
425
426				port@1 {
427					reg = <1>;
428					adv7511_out: endpoint {
429						remote-endpoint = <&hdmi_con_out>;
430					};
431				};
432			};
433		};
434
435		hdmi-in@4c {
436			compatible = "adi,adv7612";
437			reg = <0x4c>;
438			interrupt-parent = <&gpio4>;
439			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
440			default-input = <0>;
441
442			ports {
443				#address-cells = <1>;
444				#size-cells = <0>;
445
446				port@0 {
447					reg = <0>;
448					adv7612_in: endpoint {
449						remote-endpoint = <&hdmi_con_in>;
450					};
451				};
452
453				port@2 {
454					reg = <2>;
455					adv7612_out: endpoint {
456						remote-endpoint = <&vin0ep2>;
457					};
458				};
459			};
460		};
461
462		eeprom@50 {
463			compatible = "renesas,r1ex24002", "atmel,24c02";
464			reg = <0x50>;
465			pagesize = <16>;
466		};
467	};
468
469	/*
470	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
471	 * A fallback to GPIO is provided.
472	 */
473	i2cexio4: i2c-mux3 {
474		compatible = "i2c-demux-pinctrl";
475		i2c-parent = <&i2c4>, <&gpioi2c4>;
476		i2c-bus-name = "i2c-exio4";
477		#address-cells = <1>;
478		#size-cells = <0>;
479	};
480};
481
482&du {
483	pinctrl-0 = <&du_pins>;
484	pinctrl-names = "default";
485	status = "okay";
486
487	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
488		 <&x13_clk>, <&x2_clk>;
489	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
490
491	ports {
492		port@0 {
493			endpoint {
494				remote-endpoint = <&adv7511_in>;
495			};
496		};
497	};
498};
499
500&lvds0 {
501	ports {
502		port@1 {
503			lvds_connector: endpoint {
504			};
505		};
506	};
507};
508
509&extal_clk {
510	clock-frequency = <20000000>;
511};
512
513&pfc {
514	pinctrl-0 = <&scif_clk_pins>;
515	pinctrl-names = "default";
516
517	i2c1_pins: i2c1 {
518		groups = "i2c1";
519		function = "i2c1";
520	};
521
522	i2c2_pins: i2c2 {
523		groups = "i2c2";
524		function = "i2c2";
525	};
526
527	i2c4_pins: i2c4 {
528		groups = "i2c4_c";
529		function = "i2c4";
530	};
531
532	du_pins: du {
533		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
534		function = "du";
535	};
536
537	scif0_pins: scif0 {
538		groups = "scif0_data_d";
539		function = "scif0";
540	};
541
542	scif1_pins: scif1 {
543		groups = "scif1_data_d";
544		function = "scif1";
545	};
546
547	scif_clk_pins: scif_clk {
548		groups = "scif_clk";
549		function = "scif_clk";
550	};
551
552	ether_pins: ether {
553		groups = "eth_link", "eth_mdio", "eth_rmii";
554		function = "eth";
555	};
556
557	phy1_pins: phy1 {
558		groups = "intc_irq0";
559		function = "intc";
560	};
561
562	pmic_irq_pins: pmicirq {
563		groups = "intc_irq2";
564		function = "intc";
565	};
566
567	sdhi0_pins: sd0 {
568		groups = "sdhi0_data4", "sdhi0_ctrl";
569		function = "sdhi0";
570		power-source = <3300>;
571	};
572
573	sdhi0_pins_uhs: sd0_uhs {
574		groups = "sdhi0_data4", "sdhi0_ctrl";
575		function = "sdhi0";
576		power-source = <1800>;
577	};
578
579	sdhi1_pins: sd1 {
580		groups = "sdhi1_data4", "sdhi1_ctrl";
581		function = "sdhi1";
582		power-source = <3300>;
583	};
584
585	sdhi1_pins_uhs: sd1_uhs {
586		groups = "sdhi1_data4", "sdhi1_ctrl";
587		function = "sdhi1";
588		power-source = <1800>;
589	};
590
591	sdhi2_pins: sd2 {
592		groups = "sdhi2_data4", "sdhi2_ctrl";
593		function = "sdhi2";
594		power-source = <3300>;
595	};
596
597	sdhi2_pins_uhs: sd2_uhs {
598		groups = "sdhi2_data4", "sdhi2_ctrl";
599		function = "sdhi2";
600		power-source = <1800>;
601	};
602
603	qspi_pins: qspi {
604		groups = "qspi_ctrl", "qspi_data4";
605		function = "qspi";
606	};
607
608	msiof0_pins: msiof0 {
609		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
610				 "msiof0_tx";
611		function = "msiof0";
612	};
613
614	usb0_pins: usb0 {
615		groups = "usb0";
616		function = "usb0";
617	};
618
619	usb1_pins: usb1 {
620		groups = "usb1";
621		function = "usb1";
622	};
623
624	vin0_pins: vin0 {
625		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
626		function = "vin0";
627	};
628
629	vin1_pins: vin1 {
630		groups = "vin1_data8", "vin1_clk";
631		function = "vin1";
632	};
633
634	sound_pins: sound {
635		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
636		function = "ssi";
637	};
638
639	sound_clk_pins: sound_clk {
640		groups = "audio_clk_a";
641		function = "audio_clk";
642	};
643
644	keyboard_pins: keyboard {
645		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
646		bias-pull-up;
647	};
648};
649
650&ether {
651	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
652	pinctrl-names = "default";
653
654	phy-handle = <&phy1>;
655	renesas,ether-link-active-low;
656	status = "okay";
657
658	phy1: ethernet-phy@1 {
659		compatible = "ethernet-phy-id0022.1537",
660			     "ethernet-phy-ieee802.3-c22";
661		reg = <1>;
662		interrupt-parent = <&irqc0>;
663		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
664		micrel,led-mode = <1>;
665		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
666	};
667};
668
669&cmt0 {
670	status = "okay";
671};
672
673&rwdt {
674	timeout-sec = <60>;
675	status = "okay";
676};
677
678&sata0 {
679	status = "okay";
680};
681
682&scif0 {
683	pinctrl-0 = <&scif0_pins>;
684	pinctrl-names = "default";
685
686	status = "okay";
687};
688
689&scif1 {
690	pinctrl-0 = <&scif1_pins>;
691	pinctrl-names = "default";
692
693	status = "okay";
694};
695
696&scif_clk {
697	clock-frequency = <14745600>;
698};
699
700&sdhi0 {
701	pinctrl-0 = <&sdhi0_pins>;
702	pinctrl-1 = <&sdhi0_pins_uhs>;
703	pinctrl-names = "default", "state_uhs";
704
705	vmmc-supply = <&vcc_sdhi0>;
706	vqmmc-supply = <&vccq_sdhi0>;
707	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
708	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
709	sd-uhs-sdr50;
710	sd-uhs-sdr104;
711	status = "okay";
712};
713
714&sdhi1 {
715	pinctrl-0 = <&sdhi1_pins>;
716	pinctrl-1 = <&sdhi1_pins_uhs>;
717	pinctrl-names = "default", "state_uhs";
718
719	vmmc-supply = <&vcc_sdhi1>;
720	vqmmc-supply = <&vccq_sdhi1>;
721	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
722	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
723	sd-uhs-sdr50;
724	status = "okay";
725};
726
727&sdhi2 {
728	pinctrl-0 = <&sdhi2_pins>;
729	pinctrl-1 = <&sdhi2_pins_uhs>;
730	pinctrl-names = "default", "state_uhs";
731
732	vmmc-supply = <&vcc_sdhi2>;
733	vqmmc-supply = <&vccq_sdhi2>;
734	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
735	sd-uhs-sdr50;
736	status = "okay";
737};
738
739&qspi {
740	pinctrl-0 = <&qspi_pins>;
741	pinctrl-names = "default";
742
743	status = "okay";
744
745	flash: flash@0 {
746		compatible = "spansion,s25fl512s", "jedec,spi-nor";
747		reg = <0>;
748		spi-max-frequency = <30000000>;
749		spi-tx-bus-width = <4>;
750		spi-rx-bus-width = <4>;
751		spi-cpha;
752		spi-cpol;
753		m25p,fast-read;
754
755		partitions {
756			compatible = "fixed-partitions";
757			#address-cells = <1>;
758			#size-cells = <1>;
759
760			partition@0 {
761				label = "loader";
762				reg = <0x00000000 0x00080000>;
763				read-only;
764			};
765			partition@80000 {
766				label = "user";
767				reg = <0x00080000 0x00580000>;
768				read-only;
769			};
770			partition@600000 {
771				label = "flash";
772				reg = <0x00600000 0x03a00000>;
773			};
774		};
775	};
776};
777
778&msiof0 {
779	pinctrl-0 = <&msiof0_pins>;
780	pinctrl-names = "default";
781
782	status = "okay";
783
784	pmic: pmic@0 {
785		compatible = "renesas,r2a11302ft";
786		reg = <0>;
787		spi-max-frequency = <6000000>;
788		spi-cpol;
789		spi-cpha;
790	};
791};
792
793&i2c1 {
794	pinctrl-0 = <&i2c1_pins>;
795	pinctrl-names = "i2c-exio1";
796};
797
798&i2c2 {
799	pinctrl-0 = <&i2c2_pins>;
800	pinctrl-names = "i2c-hdmi";
801
802	clock-frequency = <100000>;
803};
804
805&i2c4 {
806	pinctrl-0 = <&i2c4_pins>;
807	pinctrl-names = "i2c-exio4";
808};
809
810&i2c6 {
811	pinctrl-names = "default";
812	pinctrl-0 = <&pmic_irq_pins>;
813	status = "okay";
814	clock-frequency = <100000>;
815
816	pmic@58 {
817		compatible = "dlg,da9063";
818		reg = <0x58>;
819		interrupt-parent = <&irqc0>;
820		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
821		interrupt-controller;
822		#interrupt-cells = <2>;
823
824		rtc {
825			compatible = "dlg,da9063-rtc";
826		};
827
828		watchdog {
829			compatible = "dlg,da9063-watchdog";
830		};
831	};
832
833	vdd_dvfs: regulator@68 {
834		compatible = "dlg,da9210";
835		reg = <0x68>;
836		interrupt-parent = <&irqc0>;
837		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
838
839		regulator-min-microvolt = <1000000>;
840		regulator-max-microvolt = <1000000>;
841		regulator-boot-on;
842		regulator-always-on;
843	};
844};
845
846&pci0 {
847	status = "okay";
848	pinctrl-0 = <&usb0_pins>;
849	pinctrl-names = "default";
850};
851
852&pci1 {
853	status = "okay";
854	pinctrl-0 = <&usb1_pins>;
855	pinctrl-names = "default";
856};
857
858&hsusb {
859	status = "okay";
860	pinctrl-0 = <&usb0_pins>;
861	pinctrl-names = "default";
862	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
863};
864
865&usbphy {
866	status = "okay";
867};
868
869&pcie_bus_clk {
870	clock-frequency = <100000000>;
871};
872
873&pciec {
874	status = "okay";
875};
876
877&cpu0 {
878	cpu0-supply = <&vdd_dvfs>;
879};
880
881/* HDMI video input */
882&vin0 {
883	status = "okay";
884	pinctrl-0 = <&vin0_pins>;
885	pinctrl-names = "default";
886
887	port {
888		vin0ep2: endpoint {
889			remote-endpoint = <&adv7612_out>;
890			bus-width = <24>;
891			hsync-active = <0>;
892			vsync-active = <0>;
893			pclk-sample = <1>;
894			data-active = <1>;
895		};
896	};
897};
898
899/* composite video input */
900&vin1 {
901	status = "okay";
902	pinctrl-0 = <&vin1_pins>;
903	pinctrl-names = "default";
904
905	port {
906		vin1ep: endpoint {
907			remote-endpoint = <&adv7180>;
908			bus-width = <8>;
909		};
910	};
911};
912
913&rcar_sound {
914	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
915	pinctrl-names = "default";
916
917	/* Single DAI */
918	#sound-dai-cells = <0>;
919
920	status = "okay";
921
922	rcar_sound,dai {
923		dai0 {
924			playback = <&ssi0>, <&src2>, <&dvc0>;
925			capture  = <&ssi1>, <&src3>, <&dvc1>;
926		};
927	};
928};
929
930&ssi1 {
931	shared-pin;
932};
933