1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2
3/*
4 * Device tree file for ZII's SSMB DTU board
5 *
6 * SSMB - SPU3 Switch Management Board
7 * DTU - Digital Tapping Unit
8 *
9 * Copyright (C) 2015-2019 Zodiac Inflight Innovations
10 *
11 * Based on an original 'vf610-twr.dts' which is Copyright 2015,
12 * Freescale Semiconductor, Inc.
13 */
14
15/dts-v1/;
16#include "vf610.dtsi"
17
18/ {
19	model = "ZII VF610 SSMB DTU Board";
20	compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610";
21
22	chosen {
23		stdout-path = &uart0;
24	};
25
26	memory@80000000 {
27		device_type = "memory";
28		reg = <0x80000000 0x20000000>;
29	};
30
31	gpio-leds {
32		compatible = "gpio-leds";
33		pinctrl-0 = <&pinctrl_leds_debug>;
34		pinctrl-names = "default";
35
36		led-debug {
37			label = "zii:green:debug1";
38			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
39			linux,default-trigger = "heartbeat";
40		};
41	};
42
43	reg_vcc_3v3_mcu: regulator {
44		compatible = "regulator-fixed";
45		regulator-name = "vcc_3v3_mcu";
46		regulator-min-microvolt = <3300000>;
47		regulator-max-microvolt = <3300000>;
48	};
49
50	supply-voltage-monitor {
51		compatible = "iio-hwmon";
52		io-channels = <&adc0 8>, /* 12V_MAIN */
53			      <&adc0 9>, /* +3.3V    */
54			      <&adc1 8>, /* VCC_1V5  */
55			      <&adc1 9>; /* VCC_1V2  */
56	};
57};
58
59&adc0 {
60	vref-supply = <&reg_vcc_3v3_mcu>;
61	status = "okay";
62};
63
64&adc1 {
65	vref-supply = <&reg_vcc_3v3_mcu>;
66	status = "okay";
67};
68
69&edma0 {
70	status = "okay";
71};
72
73&edma1 {
74	status = "okay";
75};
76
77&esdhc0 {
78	pinctrl-names = "default";
79	pinctrl-0 = <&pinctrl_esdhc0>;
80	bus-width = <8>;
81	non-removable;
82	no-1-8-v;
83	keep-power-in-suspend;
84	no-sdio;
85	no-sd;
86	status = "okay";
87};
88
89&esdhc1 {
90	pinctrl-names = "default";
91	pinctrl-0 = <&pinctrl_esdhc1>;
92	bus-width = <4>;
93	no-sdio;
94	status = "okay";
95};
96
97&fec1 {
98	phy-mode = "rmii";
99	pinctrl-names = "default";
100	pinctrl-0 = <&pinctrl_fec1>;
101	status = "okay";
102
103	fixed-link {
104		speed = <100>;
105		full-duplex;
106	};
107
108	mdio1: mdio {
109		#address-cells = <1>;
110		#size-cells = <0>;
111		clock-frequency = <12500000>;
112		suppress-preamble;
113		status = "okay";
114
115		switch0: ethernet-switch@0 {
116			compatible = "marvell,mv88e6190";
117			pinctrl-0 = <&pinctrl_gpio_switch0>;
118			pinctrl-names = "default";
119			reg = <0>;
120			eeprom-length = <65536>;
121			interrupt-parent = <&gpio3>;
122			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
123			interrupt-controller;
124			#interrupt-cells = <2>;
125
126			ethernet-ports {
127				#address-cells = <1>;
128				#size-cells = <0>;
129
130				ethernet-port@0 {
131					reg = <0>;
132					phy-mode = "rmii";
133					ethernet = <&fec1>;
134
135					fixed-link {
136						speed = <100>;
137						full-duplex;
138					};
139				};
140
141				ethernet-port@1 {
142					reg = <1>;
143					label = "eth_cu_100_3";
144				};
145
146				ethernet-port@5 {
147					reg = <5>;
148					label = "eth_cu_1000_4";
149				};
150
151				ethernet-port@6 {
152					reg = <6>;
153					label = "eth_cu_1000_5";
154				};
155
156				ethernet-port@8 {
157					reg = <8>;
158					label = "eth_cu_1000_1";
159				};
160
161				ethernet-port@9 {
162					reg = <9>;
163					label = "eth_cu_1000_2";
164					phy-handle = <&phy9>;
165					phy-mode = "sgmii";
166					managed = "in-band-status";
167				};
168			};
169
170			mdio-external {
171				compatible = "marvell,mv88e6xxx-mdio-external";
172				#address-cells = <1>;
173				#size-cells = <0>;
174
175				phy9: ethernet-phy@0 {
176					compatible = "ethernet-phy-ieee802.3-c45";
177					pinctrl-0 = <&pinctrl_gpio_phy9>;
178					pinctrl-names = "default";
179					interrupt-parent = <&gpio2>;
180					interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
181					reg = <0>;
182				};
183			};
184		};
185	};
186};
187
188&i2c0 {
189	clock-frequency = <100000>;
190	pinctrl-names = "default";
191	pinctrl-0 = <&pinctrl_i2c0>;
192	status = "okay";
193
194	gpio6: gpio-expander@22 {
195		compatible = "nxp,pca9554";
196		reg = <0x22>;
197		gpio-controller;
198		#gpio-cells = <2>;
199	};
200
201	/* On SSMB */
202	temperature-sensor@48 {
203		compatible = "national,lm75";
204		reg = <0x48>;
205	};
206
207	/* On DSB */
208	temperature-sensor@4d {
209		compatible = "national,lm75";
210		reg = <0x4d>;
211	};
212
213	eeprom@50 {
214		compatible = "atmel,24c04";
215		reg = <0x50>;
216		label = "nameplate";
217	};
218
219	eeprom@52 {
220		compatible = "atmel,24c04";
221		reg = <0x52>;
222	};
223};
224
225&snvsrtc {
226	status = "disabled";
227};
228
229&uart0 {
230	pinctrl-names = "default";
231	pinctrl-0 = <&pinctrl_uart0>;
232	status = "okay";
233};
234
235&iomuxc {
236	pinctrl_dspi1: dspi1grp {
237		fsl,pins = <
238			VF610_PAD_PTD5__DSPI1_CS0		0x1182
239			VF610_PAD_PTD4__DSPI1_CS1		0x1182
240			VF610_PAD_PTC6__DSPI1_SIN		0x1181
241			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
242			VF610_PAD_PTC8__DSPI1_SCK		0x1182
243		>;
244	};
245
246	pinctrl_esdhc0: esdhc0grp {
247		fsl,pins = <
248			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
249			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
250			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
251			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
252			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
253			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
254			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
255			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
256			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
257			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
258		>;
259	};
260
261	pinctrl_esdhc1: esdhc1grp {
262		fsl,pins = <
263			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
264			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
265			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
266			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
267			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
268			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
269		>;
270	};
271
272	pinctrl_fec1: fec1grp {
273		fsl,pins = <
274			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
275			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
276			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
277			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
278			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
279			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
280			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
281			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
282			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
283			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
284		>;
285	};
286
287	pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
288		fsl,pins = <
289			VF610_PAD_PTB24__GPIO_94		0x219d
290		>;
291	};
292
293	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
294		fsl,pins = <
295			VF610_PAD_PTB28__GPIO_98		0x219d
296		>;
297	};
298
299	pinctrl_i2c0: i2c0grp {
300		fsl,pins = <
301			VF610_PAD_PTB14__I2C0_SCL		0x37ff
302			VF610_PAD_PTB15__I2C0_SDA		0x37ff
303		>;
304	};
305
306	pinctrl_i2c1: i2c1grp {
307		fsl,pins = <
308			VF610_PAD_PTB16__I2C1_SCL		0x37ff
309			VF610_PAD_PTB17__I2C1_SDA		0x37ff
310		>;
311	};
312
313	pinctrl_leds_debug: pinctrl-leds-debug {
314		fsl,pins = <
315			VF610_PAD_PTD3__GPIO_82			0x31c2
316		>;
317	};
318
319	pinctrl_uart0: uart0grp {
320		fsl,pins = <
321			VF610_PAD_PTB10__UART0_TX		0x21a2
322			VF610_PAD_PTB11__UART0_RX		0x21a1
323		>;
324	};
325};
326