1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (C) 2018 PHYTEC Messtechnik GmbH
4 * Author: Christian Hemp <c.hemp@phytec.de>
5 */
6
7
8/ {
9	aliases {
10		rtc0 = &i2c_rtc;
11	};
12
13	backlight: backlight {
14		compatible = "pwm-backlight";
15		brightness-levels = <0 4 8 16 32 64 128 255>;
16		default-brightness-level = <7>;
17		power-supply = <&reg_backlight>;
18		pwms = <&pwm1 0 5000000 0>;
19		status = "okay";
20	};
21
22	gpio_leds: leds {
23		compatible = "gpio-leds";
24		pinctrl-names = "default";
25		pinctrl-0 = <&pinctrl_gpioleds>;
26		status = "disabled";
27
28		led-red {
29			label = "phyboard-mira:red";
30			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
31		};
32
33		led-green {
34			label = "phyboard-mira:green";
35			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
36		};
37
38		led-blue {
39			label = "phyboard-mira:blue";
40			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
41			linux,default-trigger = "mmc0";
42		};
43	};
44
45	reg_backlight: regulator-backlight {
46		compatible = "regulator-fixed";
47		regulator-name = "backlight_3v3";
48		regulator-min-microvolt = <3300000>;
49		regulator-max-microvolt = <3300000>;
50		regulator-always-on;
51	};
52
53	reg_en_switch: regulator-en-switch {
54		compatible = "regulator-fixed";
55		pinctrl-names = "default";
56		pinctrl-0 = <&pinctrl_en_switch>;
57		regulator-name = "Enable Switch";
58		regulator-min-microvolt = <3300000>;
59		regulator-max-microvolt = <3300000>;
60		enable-active-high;
61		gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
62		regulator-always-on;
63	};
64
65	reg_flexcan1: regulator-flexcan1 {
66		compatible = "regulator-fixed";
67		pinctrl-names = "default";
68		pinctrl-0 = <&pinctrl_flexcan1_en>;
69		regulator-name = "flexcan1-reg";
70		regulator-min-microvolt = <1500000>;
71		regulator-max-microvolt = <1500000>;
72		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
73		enable-active-high;
74	};
75
76	reg_panel: regulator-panel {
77		compatible = "regulator-fixed";
78		regulator-name = "panel-power-supply";
79		regulator-min-microvolt = <12000000>;
80		regulator-max-microvolt = <12000000>;
81		regulator-always-on;
82	};
83
84	reg_pcie: regulator-pcie {
85		compatible = "regulator-fixed";
86		pinctrl-names = "default";
87		pinctrl-0 = <&pinctrl_pcie_reg>;
88		regulator-name = "mPCIe_1V5";
89		regulator-min-microvolt = <1500000>;
90		regulator-max-microvolt = <1500000>;
91		gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
92		enable-active-high;
93	};
94
95	reg_usb_h1_vbus: usb-h1-vbus {
96		compatible = "regulator-fixed";
97		pinctrl-names = "default";
98		pinctrl-0 = <&pinctrl_usbh1_vbus>;
99		regulator-name = "usb_h1_vbus";
100		regulator-min-microvolt = <5000000>;
101		regulator-max-microvolt = <5000000>;
102		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
103		enable-active-high;
104	};
105
106	reg_usbotg_vbus: usbotg-vbus {
107		compatible = "regulator-fixed";
108		pinctrl-names = "default";
109		pinctrl-0 = <&pinctrl_usbotg_vbus>;
110		regulator-name = "usb_otg_vbus";
111		regulator-min-microvolt = <5000000>;
112		regulator-max-microvolt = <5000000>;
113		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
114		enable-active-high;
115	};
116
117	panel {
118		compatible = "auo,g104sn02";
119		pinctrl-names = "default";
120		pinctrl-0 = <&pinctrl_panel_en>;
121		power-supply = <&reg_panel>;
122		enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
123		backlight = <&backlight>;
124
125		port {
126			panel_in: endpoint {
127				remote-endpoint = <&lvds0_out>;
128			};
129		};
130	};
131};
132
133&can1 {
134	pinctrl-names = "default";
135	pinctrl-0 = <&pinctrl_flexcan1>;
136	xceiver-supply = <&reg_flexcan1>;
137	status = "disabled";
138};
139
140&hdmi {
141	pinctrl-names = "default";
142	pinctrl-0 = <&pinctrl_hdmicec>;
143	ddc-i2c-bus = <&i2c2>;
144	status = "disabled";
145};
146
147&i2c1 {
148	pinctrl-names = "default", "gpio";
149	pinctrl-0 = <&pinctrl_i2c1>;
150	pinctrl-1 = <&pinctrl_i2c1_gpio>;
151	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
152	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
153	clock-frequency = <400000>;
154	status = "disabled";
155
156	stmpe: touchctrl@44 {
157		compatible = "st,stmpe811";
158		pinctrl-names = "default";
159		pinctrl-0 = <&pinctrl_stmpe>;
160		reg = <0x44>;
161		interrupt-parent = <&gpio7>;
162		interrupts = <12 IRQ_TYPE_NONE>;
163		status = "disabled";
164
165		stmpe_touchscreen {
166			compatible = "st,stmpe-ts";
167			st,sample-time = <4>;
168			st,mod-12b = <1>;
169			st,ref-sel = <0>;
170			st,adc-freq = <1>;
171			st,ave-ctrl = <1>;
172			st,touch-det-delay = <2>;
173			st,settling = <2>;
174			st,fraction-z = <7>;
175			st,i-drive = <1>;
176		};
177	};
178
179	i2c_rtc: rtc@68 {
180		compatible = "microcrystal,rv4162";
181		pinctrl-names = "default";
182		pinctrl-0 = <&pinctrl_rtc_int>;
183		reg = <0x68>;
184		interrupt-parent = <&gpio7>;
185		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
186		status = "disabled";
187	};
188};
189
190&i2c2 {
191	pinctrl-names = "default", "gpio";
192	pinctrl-0 = <&pinctrl_i2c2>;
193	pinctrl-1 = <&pinctrl_i2c2_gpio>;
194	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
195	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
196	clock-frequency = <100000>;
197	status = "disabled";
198};
199
200&ldb {
201	status = "okay";
202
203	lvds-channel@0 {
204		fsl,data-mapping = "spwg";
205		fsl,data-width = <24>;
206		status = "disabled";
207
208		port@4 {
209			reg = <4>;
210
211			lvds0_out: endpoint {
212				remote-endpoint = <&panel_in>;
213			};
214		};
215	};
216};
217
218&pcie {
219	pinctrl-names = "default";
220	pinctrl-0 = <&pinctrl_pcie>;
221	reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
222	vpcie-supply = <&reg_pcie>;
223	status = "disabled";
224};
225
226&pwm1 {
227	pinctrl-names = "default";
228	pinctrl-0 = <&pinctrl_pwm1>;
229	status = "okay";
230};
231
232&uart2 {
233	pinctrl-names = "default";
234	pinctrl-0 = <&pinctrl_uart2>;
235	status = "okay";
236};
237
238&uart3 {
239	pinctrl-names = "default";
240	pinctrl-0 = <&pinctrl_uart3>;
241	uart-has-rtscts;
242	status = "disabled";
243};
244
245&usbh1 {
246	vbus-supply = <&reg_usb_h1_vbus>;
247	disable-over-current;
248	status = "disabled";
249};
250
251&usbotg {
252	pinctrl-names = "default";
253	pinctrl-0 = <&pinctrl_usbotg>;
254	vbus-supply = <&reg_usbotg_vbus>;
255	disable-over-current;
256	status = "disabled";
257};
258
259&usdhc1 {
260	pinctrl-names = "default";
261	pinctrl-0 = <&pinctrl_usdhc1>;
262	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
263	no-1-8-v;
264	disable-wp;
265	status = "disabled";
266};
267
268&iomuxc {
269	pinctrl_panel_en: panelen1grp {
270		fsl,pins = <
271			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
272		>;
273	};
274
275	pinctrl_en_switch: enswitchgrp {
276		fsl,pins = <
277			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0xb0b1
278		>;
279	};
280
281	pinctrl_flexcan1: flexcan1grp {
282		fsl,pins = <
283			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
284			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
285		>;
286	};
287
288	pinctrl_flexcan1_en: flexcan1engrp {
289		fsl,pins = <
290			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0xb0b1
291		>;
292	};
293
294	pinctrl_gpioleds: gpioledsgrp {
295		fsl,pins = <
296			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
297			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
298			MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24	0x1b0b0
299		>;
300	};
301
302	pinctrl_hdmicec: hdmicecgrp {
303		fsl,pins = <
304			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
305		>;
306	};
307
308	pinctrl_i2c1: i2c1grp {
309		fsl,pins = <
310			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
311			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
312		>;
313	};
314
315	pinctrl_i2c1_gpio: i2c1gpiogrp {
316		fsl,pins = <
317			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
318			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
319		>;
320	};
321
322	pinctrl_i2c2: i2c2grp {
323		fsl,pins = <
324			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
325			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
326		>;
327	};
328
329	pinctrl_i2c2_gpio: i2c2gpiogrp {
330		fsl,pins = <
331			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
332			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
333		>;
334	};
335
336	pinctrl_pcie: pciegrp {
337		fsl,pins = <
338			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0xb0b1
339		>;
340	};
341
342	pinctrl_pcie_reg: pciereggrp {
343		fsl,pins = <
344			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0xb0b1
345		>;
346	};
347
348	pinctrl_pwm1: pwm1grp {
349		fsl,pins = <
350			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
351		>;
352	};
353
354	pinctrl_rtc_int: rtcintgrp {
355		fsl,pins = <
356			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0
357		>;
358	};
359
360	pinctrl_stmpe: stmpegrp {
361		fsl,pins = <
362			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
363		>;
364	};
365
366	pinctrl_uart2: uart2grp {
367		fsl,pins = <
368			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
369			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
370		>;
371	};
372
373	pinctrl_uart3: uart3grp {
374		fsl,pins = <
375			MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
376			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
377			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
378			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
379		>;
380	};
381
382	pinctrl_usbh1_vbus: usbh1vbusgrp {
383		fsl,pins = <
384			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0xb0b1
385		>;
386	};
387
388	pinctrl_usbotg: usbotggrp {
389		fsl,pins = <
390			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
391		>;
392	};
393
394	pinctrl_usbotg_vbus: usbotgvbusgrp {
395		fsl,pins = <
396			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0xb0b1
397		>;
398	};
399
400	pinctrl_usdhc1: usdhc1grp {
401		fsl,pins = <
402			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
403			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
404			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
405			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
406			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
407			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
408			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1  /* CD */
409		>;
410	};
411};
412