1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com)
4 */
5
6#include <linux/interrupt.h>
7#include <linux/module.h>
8#include <linux/of.h>
9#include <linux/irqdomain.h>
10#include <linux/irqchip.h>
11#include <asm/irq.h>
12
13#define NR_CPU_IRQS	32	/* number of irq lines coming in */
14#define TIMER0_IRQ	3	/* Fixed by ISA */
15
16/*
17 * Early Hardware specific Interrupt setup
18 * -Platform independent, needed for each CPU (not foldable into init_IRQ)
19 * -Called very early (start_kernel -> setup_arch -> setup_processor)
20 *
21 * what it does ?
22 * -Optionally, setup the High priority Interrupts as Level 2 IRQs
23 */
24void arc_init_IRQ(void)
25{
26	unsigned int level_mask = 0, i;
27
28       /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
29	level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;
30
31	/*
32	 * Write to register, even if no LV2 IRQs configured to reset it
33	 * in case bootloader had mucked with it
34	 */
35	write_aux_reg(AUX_IRQ_LEV, level_mask);
36
37	if (level_mask)
38		pr_info("Level-2 interrupts bitset %x\n", level_mask);
39
40	/*
41	 * Disable all IRQ lines so faulty external hardware won't
42	 * trigger interrupt that kernel is not ready to handle.
43	 */
44	for (i = TIMER0_IRQ; i < NR_CPU_IRQS; i++) {
45		unsigned int ienb;
46
47		ienb = read_aux_reg(AUX_IENABLE);
48		ienb &= ~(1 << i);
49		write_aux_reg(AUX_IENABLE, ienb);
50	}
51}
52
53/*
54 * ARC700 core includes a simple on-chip intc supporting
55 * -per IRQ enable/disable
56 * -2 levels of interrupts (high/low)
57 * -all interrupts being level triggered
58 *
59 * To reduce platform code, we assume all IRQs directly hooked-up into intc.
60 * Platforms with external intc, hence cascaded IRQs, are free to over-ride
61 * below, per IRQ.
62 */
63
64static void arc_irq_mask(struct irq_data *data)
65{
66	unsigned int ienb;
67
68	ienb = read_aux_reg(AUX_IENABLE);
69	ienb &= ~(1 << data->hwirq);
70	write_aux_reg(AUX_IENABLE, ienb);
71}
72
73static void arc_irq_unmask(struct irq_data *data)
74{
75	unsigned int ienb;
76
77	ienb = read_aux_reg(AUX_IENABLE);
78	ienb |= (1 << data->hwirq);
79	write_aux_reg(AUX_IENABLE, ienb);
80}
81
82static struct irq_chip onchip_intc = {
83	.name           = "ARC In-core Intc",
84	.irq_mask	= arc_irq_mask,
85	.irq_unmask	= arc_irq_unmask,
86};
87
88static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
89			       irq_hw_number_t hw)
90{
91	switch (hw) {
92	case TIMER0_IRQ:
93		irq_set_percpu_devid(irq);
94		irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
95		break;
96	default:
97		irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq);
98	}
99	return 0;
100}
101
102static const struct irq_domain_ops arc_intc_domain_ops = {
103	.xlate = irq_domain_xlate_onecell,
104	.map = arc_intc_domain_map,
105};
106
107static int __init
108init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
109{
110	struct irq_domain *root_domain;
111
112	if (parent)
113		panic("DeviceTree incore intc not a root irq controller\n");
114
115	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
116					    &arc_intc_domain_ops, NULL);
117	if (!root_domain)
118		panic("root irq domain not avail\n");
119
120	/*
121	 * Needed for primary domain lookup to succeed
122	 * This is a primary irqchip, and can never have a parent
123	 */
124	irq_set_default_host(root_domain);
125
126	return 0;
127}
128
129IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
130
131/*
132 * arch_local_irq_enable - Enable interrupts.
133 *
134 * 1. Explicitly called to re-enable interrupts
135 * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc
136 *    which maybe in hard ISR itself
137 *
138 * Semantics of this function change depending on where it is called from:
139 *
140 * -If called from hard-ISR, it must not invert interrupt priorities
141 *  e.g. suppose TIMER is high priority (Level 2) IRQ
142 *    Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
143 *    Here local_irq_enable( ) shd not re-enable lower priority interrupts
144 * -If called from soft-ISR, it must re-enable all interrupts
145 *    soft ISR are low priority jobs which can be very slow, thus all IRQs
146 *    must be enabled while they run.
147 *    Now hardware context wise we may still be in L2 ISR (not done rtie)
148 *    still we must re-enable both L1 and L2 IRQs
149 *  Another twist is prev scenario with flow being
150 *     L1 ISR ==> interrupted by L2 ISR  ==> L2 soft ISR
151 *     here we must not re-enable Ll as prev Ll Interrupt's h/w context will get
152 *     over-written (this is deficiency in ARC700 Interrupt mechanism)
153 */
154
155#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS	/* Complex version for 2 IRQ levels */
156
157void arch_local_irq_enable(void)
158{
159	unsigned long flags = arch_local_save_flags();
160
161	if (flags & STATUS_A2_MASK)
162		flags |= STATUS_E2_MASK;
163	else if (flags & STATUS_A1_MASK)
164		flags |= STATUS_E1_MASK;
165
166	arch_local_irq_restore(flags);
167}
168
169EXPORT_SYMBOL(arch_local_irq_enable);
170#endif
171