1// SPDX-License-Identifier: GPL-2.0 2/* 3 * linux/arch/alpha/kernel/sys_dp264.c 4 * 5 * Copyright (C) 1995 David A Rusling 6 * Copyright (C) 1996, 1999 Jay A Estabrook 7 * Copyright (C) 1998, 1999 Richard Henderson 8 * 9 * Modified by Christopher C. Chimelis, 2001 to 10 * add support for the addition of Shark to the 11 * Tsunami family. 12 * 13 * Code supporting the DP264 (EV6+TSUNAMI). 14 */ 15 16#include <linux/kernel.h> 17#include <linux/types.h> 18#include <linux/mm.h> 19#include <linux/sched.h> 20#include <linux/pci.h> 21#include <linux/init.h> 22#include <linux/bitops.h> 23 24#include <asm/ptrace.h> 25#include <asm/dma.h> 26#include <asm/irq.h> 27#include <asm/mmu_context.h> 28#include <asm/io.h> 29#include <asm/core_tsunami.h> 30#include <asm/hwrpb.h> 31#include <asm/tlbflush.h> 32 33#include "proto.h" 34#include "irq_impl.h" 35#include "pci_impl.h" 36#include "machvec_impl.h" 37 38 39/* Note mask bit is true for ENABLED irqs. */ 40static unsigned long cached_irq_mask; 41/* dp264 boards handle at max four CPUs */ 42static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL }; 43 44DEFINE_SPINLOCK(dp264_irq_lock); 45 46static void 47tsunami_update_irq_hw(unsigned long mask) 48{ 49 register tsunami_cchip *cchip = TSUNAMI_cchip; 50 unsigned long isa_enable = 1UL << 55; 51 register int bcpu = boot_cpuid; 52 53#ifdef CONFIG_SMP 54 volatile unsigned long *dim0, *dim1, *dim2, *dim3; 55 unsigned long mask0, mask1, mask2, mask3, dummy; 56 57 mask &= ~isa_enable; 58 mask0 = mask & cpu_irq_affinity[0]; 59 mask1 = mask & cpu_irq_affinity[1]; 60 mask2 = mask & cpu_irq_affinity[2]; 61 mask3 = mask & cpu_irq_affinity[3]; 62 63 if (bcpu == 0) mask0 |= isa_enable; 64 else if (bcpu == 1) mask1 |= isa_enable; 65 else if (bcpu == 2) mask2 |= isa_enable; 66 else mask3 |= isa_enable; 67 68 dim0 = &cchip->dim0.csr; 69 dim1 = &cchip->dim1.csr; 70 dim2 = &cchip->dim2.csr; 71 dim3 = &cchip->dim3.csr; 72 if (!cpu_possible(0)) dim0 = &dummy; 73 if (!cpu_possible(1)) dim1 = &dummy; 74 if (!cpu_possible(2)) dim2 = &dummy; 75 if (!cpu_possible(3)) dim3 = &dummy; 76 77 *dim0 = mask0; 78 *dim1 = mask1; 79 *dim2 = mask2; 80 *dim3 = mask3; 81 mb(); 82 *dim0; 83 *dim1; 84 *dim2; 85 *dim3; 86#else 87 volatile unsigned long *dimB; 88 if (bcpu == 0) dimB = &cchip->dim0.csr; 89 else if (bcpu == 1) dimB = &cchip->dim1.csr; 90 else if (bcpu == 2) dimB = &cchip->dim2.csr; 91 else dimB = &cchip->dim3.csr; 92 93 *dimB = mask | isa_enable; 94 mb(); 95 *dimB; 96#endif 97} 98 99static void 100dp264_enable_irq(struct irq_data *d) 101{ 102 spin_lock(&dp264_irq_lock); 103 cached_irq_mask |= 1UL << d->irq; 104 tsunami_update_irq_hw(cached_irq_mask); 105 spin_unlock(&dp264_irq_lock); 106} 107 108static void 109dp264_disable_irq(struct irq_data *d) 110{ 111 spin_lock(&dp264_irq_lock); 112 cached_irq_mask &= ~(1UL << d->irq); 113 tsunami_update_irq_hw(cached_irq_mask); 114 spin_unlock(&dp264_irq_lock); 115} 116 117static void 118clipper_enable_irq(struct irq_data *d) 119{ 120 spin_lock(&dp264_irq_lock); 121 cached_irq_mask |= 1UL << (d->irq - 16); 122 tsunami_update_irq_hw(cached_irq_mask); 123 spin_unlock(&dp264_irq_lock); 124} 125 126static void 127clipper_disable_irq(struct irq_data *d) 128{ 129 spin_lock(&dp264_irq_lock); 130 cached_irq_mask &= ~(1UL << (d->irq - 16)); 131 tsunami_update_irq_hw(cached_irq_mask); 132 spin_unlock(&dp264_irq_lock); 133} 134 135static void 136cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) 137{ 138 int cpu; 139 140 for (cpu = 0; cpu < 4; cpu++) { 141 unsigned long aff = cpu_irq_affinity[cpu]; 142 if (cpumask_test_cpu(cpu, &affinity)) 143 aff |= 1UL << irq; 144 else 145 aff &= ~(1UL << irq); 146 cpu_irq_affinity[cpu] = aff; 147 } 148} 149 150static int 151dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity, 152 bool force) 153{ 154 spin_lock(&dp264_irq_lock); 155 cpu_set_irq_affinity(d->irq, *affinity); 156 tsunami_update_irq_hw(cached_irq_mask); 157 spin_unlock(&dp264_irq_lock); 158 159 return 0; 160} 161 162static int 163clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity, 164 bool force) 165{ 166 spin_lock(&dp264_irq_lock); 167 cpu_set_irq_affinity(d->irq - 16, *affinity); 168 tsunami_update_irq_hw(cached_irq_mask); 169 spin_unlock(&dp264_irq_lock); 170 171 return 0; 172} 173 174static struct irq_chip dp264_irq_type = { 175 .name = "DP264", 176 .irq_unmask = dp264_enable_irq, 177 .irq_mask = dp264_disable_irq, 178 .irq_mask_ack = dp264_disable_irq, 179 .irq_set_affinity = dp264_set_affinity, 180}; 181 182static struct irq_chip clipper_irq_type = { 183 .name = "CLIPPER", 184 .irq_unmask = clipper_enable_irq, 185 .irq_mask = clipper_disable_irq, 186 .irq_mask_ack = clipper_disable_irq, 187 .irq_set_affinity = clipper_set_affinity, 188}; 189 190static void 191dp264_device_interrupt(unsigned long vector) 192{ 193 unsigned long pld; 194 unsigned int i; 195 196 /* Read the interrupt summary register of TSUNAMI */ 197 pld = TSUNAMI_cchip->dir0.csr; 198 199 /* 200 * Now for every possible bit set, work through them and call 201 * the appropriate interrupt handler. 202 */ 203 while (pld) { 204 i = ffz(~pld); 205 pld &= pld - 1; /* clear least bit set */ 206 if (i == 55) 207 isa_device_interrupt(vector); 208 else 209 handle_irq(16 + i); 210 } 211} 212 213static void 214dp264_srm_device_interrupt(unsigned long vector) 215{ 216 int irq; 217 218 irq = (vector - 0x800) >> 4; 219 220 /* 221 * The SRM console reports PCI interrupts with a vector calculated by: 222 * 223 * 0x900 + (0x10 * DRIR-bit) 224 * 225 * So bit 16 shows up as IRQ 32, etc. 226 * 227 * On DP264/BRICK/MONET, we adjust it down by 16 because at least 228 * that many of the low order bits of the DRIR are not used, and 229 * so we don't count them. 230 */ 231 if (irq >= 32) 232 irq -= 16; 233 234 handle_irq(irq); 235} 236 237static void 238clipper_srm_device_interrupt(unsigned long vector) 239{ 240 int irq; 241 242 irq = (vector - 0x800) >> 4; 243 244/* 245 * The SRM console reports PCI interrupts with a vector calculated by: 246 * 247 * 0x900 + (0x10 * DRIR-bit) 248 * 249 * So bit 16 shows up as IRQ 32, etc. 250 * 251 * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need 252 * to scale down the vector reported, we just use it. 253 * 254 * Eg IRQ 24 is DRIR bit 8, etc, etc 255 */ 256 handle_irq(irq); 257} 258 259static void __init 260init_tsunami_irqs(struct irq_chip * ops, int imin, int imax) 261{ 262 long i; 263 for (i = imin; i <= imax; ++i) { 264 irq_set_chip_and_handler(i, ops, handle_level_irq); 265 irq_set_status_flags(i, IRQ_LEVEL); 266 } 267} 268 269static void __init 270dp264_init_irq(void) 271{ 272 outb(0, DMA1_RESET_REG); 273 outb(0, DMA2_RESET_REG); 274 outb(DMA_MODE_CASCADE, DMA2_MODE_REG); 275 outb(0, DMA2_MASK_REG); 276 277 if (alpha_using_srm) 278 alpha_mv.device_interrupt = dp264_srm_device_interrupt; 279 280 tsunami_update_irq_hw(0); 281 282 init_i8259a_irqs(); 283 init_tsunami_irqs(&dp264_irq_type, 16, 47); 284} 285 286static void __init 287clipper_init_irq(void) 288{ 289 outb(0, DMA1_RESET_REG); 290 outb(0, DMA2_RESET_REG); 291 outb(DMA_MODE_CASCADE, DMA2_MODE_REG); 292 outb(0, DMA2_MASK_REG); 293 294 if (alpha_using_srm) 295 alpha_mv.device_interrupt = clipper_srm_device_interrupt; 296 297 tsunami_update_irq_hw(0); 298 299 init_i8259a_irqs(); 300 init_tsunami_irqs(&clipper_irq_type, 24, 63); 301} 302 303 304/* 305 * PCI Fixup configuration. 306 * 307 * Summary @ TSUNAMI_CSR_DIM0: 308 * Bit Meaning 309 * 0-17 Unused 310 *18 Interrupt SCSI B (Adaptec 7895 builtin) 311 *19 Interrupt SCSI A (Adaptec 7895 builtin) 312 *20 Interrupt Line D from slot 2 PCI0 313 *21 Interrupt Line C from slot 2 PCI0 314 *22 Interrupt Line B from slot 2 PCI0 315 *23 Interrupt Line A from slot 2 PCI0 316 *24 Interrupt Line D from slot 1 PCI0 317 *25 Interrupt Line C from slot 1 PCI0 318 *26 Interrupt Line B from slot 1 PCI0 319 *27 Interrupt Line A from slot 1 PCI0 320 *28 Interrupt Line D from slot 0 PCI0 321 *29 Interrupt Line C from slot 0 PCI0 322 *30 Interrupt Line B from slot 0 PCI0 323 *31 Interrupt Line A from slot 0 PCI0 324 * 325 *32 Interrupt Line D from slot 3 PCI1 326 *33 Interrupt Line C from slot 3 PCI1 327 *34 Interrupt Line B from slot 3 PCI1 328 *35 Interrupt Line A from slot 3 PCI1 329 *36 Interrupt Line D from slot 2 PCI1 330 *37 Interrupt Line C from slot 2 PCI1 331 *38 Interrupt Line B from slot 2 PCI1 332 *39 Interrupt Line A from slot 2 PCI1 333 *40 Interrupt Line D from slot 1 PCI1 334 *41 Interrupt Line C from slot 1 PCI1 335 *42 Interrupt Line B from slot 1 PCI1 336 *43 Interrupt Line A from slot 1 PCI1 337 *44 Interrupt Line D from slot 0 PCI1 338 *45 Interrupt Line C from slot 0 PCI1 339 *46 Interrupt Line B from slot 0 PCI1 340 *47 Interrupt Line A from slot 0 PCI1 341 *48-52 Unused 342 *53 PCI0 NMI (from Cypress) 343 *54 PCI0 SMI INT (from Cypress) 344 *55 PCI0 ISA Interrupt (from Cypress) 345 *56-60 Unused 346 *61 PCI1 Bus Error 347 *62 PCI0 Bus Error 348 *63 Reserved 349 * 350 * IdSel 351 * 5 Cypress Bridge I/O 352 * 6 SCSI Adaptec builtin 353 * 7 64 bit PCI option slot 0 (all busses) 354 * 8 64 bit PCI option slot 1 (all busses) 355 * 9 64 bit PCI option slot 2 (all busses) 356 * 10 64 bit PCI option slot 3 (not bus 0) 357 */ 358 359static int 360isa_irq_fixup(const struct pci_dev *dev, int irq) 361{ 362 u8 irq8; 363 364 if (irq > 0) 365 return irq; 366 367 /* This interrupt is routed via ISA bridge, so we'll 368 just have to trust whatever value the console might 369 have assigned. */ 370 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8); 371 372 return irq8 & 0xf; 373} 374 375static int 376dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 377{ 378 static char irq_tab[6][5] = { 379 /*INT INTA INTB INTC INTD */ 380 { -1, -1, -1, -1, -1}, /* IdSel 5 ISA Bridge */ 381 { 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/ 382 { 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */ 383 { 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */ 384 { 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */ 385 { 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0} /* IdSel 10 slot 3 */ 386 }; 387 const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; 388 struct pci_controller *hose = dev->sysdata; 389 int irq = COMMON_TABLE_LOOKUP; 390 391 if (irq > 0) 392 irq += 16 * hose->index; 393 394 return isa_irq_fixup(dev, irq); 395} 396 397static int 398monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 399{ 400 static char irq_tab[13][5] = { 401 /*INT INTA INTB INTC INTD */ 402 { 45, 45, 45, 45, 45}, /* IdSel 3 21143 PCI1 */ 403 { -1, -1, -1, -1, -1}, /* IdSel 4 unused */ 404 { -1, -1, -1, -1, -1}, /* IdSel 5 unused */ 405 { 47, 47, 47, 47, 47}, /* IdSel 6 SCSI PCI1 */ 406 { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */ 407 { -1, -1, -1, -1, -1}, /* IdSel 8 P2P PCI1 */ 408#if 1 409 { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/ 410 { 24, 24, 25, 26, 27}, /* IdSel 15 slot 5 PCI2*/ 411#else 412 { -1, -1, -1, -1, -1}, /* IdSel 9 unused */ 413 { -1, -1, -1, -1, -1}, /* IdSel 10 unused */ 414#endif 415 { 40, 40, 41, 42, 43}, /* IdSel 11 slot 1 PCI0*/ 416 { 36, 36, 37, 38, 39}, /* IdSel 12 slot 2 PCI0*/ 417 { 32, 32, 33, 34, 35}, /* IdSel 13 slot 3 PCI0*/ 418 { 28, 28, 29, 30, 31}, /* IdSel 14 slot 4 PCI2*/ 419 { 24, 24, 25, 26, 27} /* IdSel 15 slot 5 PCI2*/ 420 }; 421 const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5; 422 423 return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); 424} 425 426static u8 427monet_swizzle(struct pci_dev *dev, u8 *pinp) 428{ 429 struct pci_controller *hose = dev->sysdata; 430 int slot, pin = *pinp; 431 432 if (!dev->bus->parent) { 433 slot = PCI_SLOT(dev->devfn); 434 } 435 /* Check for the built-in bridge on hose 1. */ 436 else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) { 437 slot = PCI_SLOT(dev->devfn); 438 } else { 439 /* Must be a card-based bridge. */ 440 do { 441 /* Check for built-in bridge on hose 1. */ 442 if (hose->index == 1 && 443 PCI_SLOT(dev->bus->self->devfn) == 8) { 444 slot = PCI_SLOT(dev->devfn); 445 break; 446 } 447 pin = pci_swizzle_interrupt_pin(dev, pin); 448 449 /* Move up the chain of bridges. */ 450 dev = dev->bus->self; 451 /* Slot of the next bridge. */ 452 slot = PCI_SLOT(dev->devfn); 453 } while (dev->bus->self); 454 } 455 *pinp = pin; 456 return slot; 457} 458 459static int 460webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 461{ 462 static char irq_tab[13][5] = { 463 /*INT INTA INTB INTC INTD */ 464 { -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */ 465 { -1, -1, -1, -1, -1}, /* IdSel 8 unused */ 466 { 29, 29, 29, 29, 29}, /* IdSel 9 21143 #1 */ 467 { -1, -1, -1, -1, -1}, /* IdSel 10 unused */ 468 { 30, 30, 30, 30, 30}, /* IdSel 11 21143 #2 */ 469 { -1, -1, -1, -1, -1}, /* IdSel 12 unused */ 470 { -1, -1, -1, -1, -1}, /* IdSel 13 unused */ 471 { 35, 35, 34, 33, 32}, /* IdSel 14 slot 0 */ 472 { 39, 39, 38, 37, 36}, /* IdSel 15 slot 1 */ 473 { 43, 43, 42, 41, 40}, /* IdSel 16 slot 2 */ 474 { 47, 47, 46, 45, 44}, /* IdSel 17 slot 3 */ 475 }; 476 const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5; 477 478 return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP); 479} 480 481static int 482clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 483{ 484 static char irq_tab[7][5] = { 485 /*INT INTA INTB INTC INTD */ 486 { 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */ 487 { 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */ 488 { 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */ 489 { 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */ 490 { 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */ 491 { 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */ 492 { -1, -1, -1, -1, -1} /* IdSel 7 ISA Bridge */ 493 }; 494 const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5; 495 struct pci_controller *hose = dev->sysdata; 496 int irq = COMMON_TABLE_LOOKUP; 497 498 if (irq > 0) 499 irq += 16 * hose->index; 500 501 return isa_irq_fixup(dev, irq); 502} 503 504static void __init 505dp264_init_pci(void) 506{ 507 common_init_pci(); 508 SMC669_Init(0); 509 locate_and_init_vga(NULL); 510} 511 512static void __init 513monet_init_pci(void) 514{ 515 common_init_pci(); 516 SMC669_Init(1); 517 es1888_init(); 518 locate_and_init_vga(NULL); 519} 520 521static void __init 522clipper_init_pci(void) 523{ 524 common_init_pci(); 525 locate_and_init_vga(NULL); 526} 527 528static void __init 529webbrick_init_arch(void) 530{ 531 tsunami_init_arch(); 532 533 /* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */ 534 hose_head->sg_isa->align_entry = 4; 535 hose_head->sg_pci->align_entry = 4; 536} 537 538 539/* 540 * The System Vectors 541 */ 542 543struct alpha_machine_vector dp264_mv __initmv = { 544 .vector_name = "DP264", 545 DO_EV6_MMU, 546 DO_DEFAULT_RTC, 547 DO_TSUNAMI_IO, 548 .machine_check = tsunami_machine_check, 549 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 550 .min_io_address = DEFAULT_IO_BASE, 551 .min_mem_address = DEFAULT_MEM_BASE, 552 .pci_dac_offset = TSUNAMI_DAC_OFFSET, 553 554 .nr_irqs = 64, 555 .device_interrupt = dp264_device_interrupt, 556 557 .init_arch = tsunami_init_arch, 558 .init_irq = dp264_init_irq, 559 .init_rtc = common_init_rtc, 560 .init_pci = dp264_init_pci, 561 .kill_arch = tsunami_kill_arch, 562 .pci_map_irq = dp264_map_irq, 563 .pci_swizzle = common_swizzle, 564}; 565ALIAS_MV(dp264) 566 567struct alpha_machine_vector monet_mv __initmv = { 568 .vector_name = "Monet", 569 DO_EV6_MMU, 570 DO_DEFAULT_RTC, 571 DO_TSUNAMI_IO, 572 .machine_check = tsunami_machine_check, 573 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 574 .min_io_address = DEFAULT_IO_BASE, 575 .min_mem_address = DEFAULT_MEM_BASE, 576 .pci_dac_offset = TSUNAMI_DAC_OFFSET, 577 578 .nr_irqs = 64, 579 .device_interrupt = dp264_device_interrupt, 580 581 .init_arch = tsunami_init_arch, 582 .init_irq = dp264_init_irq, 583 .init_rtc = common_init_rtc, 584 .init_pci = monet_init_pci, 585 .kill_arch = tsunami_kill_arch, 586 .pci_map_irq = monet_map_irq, 587 .pci_swizzle = monet_swizzle, 588}; 589 590struct alpha_machine_vector webbrick_mv __initmv = { 591 .vector_name = "Webbrick", 592 DO_EV6_MMU, 593 DO_DEFAULT_RTC, 594 DO_TSUNAMI_IO, 595 .machine_check = tsunami_machine_check, 596 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 597 .min_io_address = DEFAULT_IO_BASE, 598 .min_mem_address = DEFAULT_MEM_BASE, 599 .pci_dac_offset = TSUNAMI_DAC_OFFSET, 600 601 .nr_irqs = 64, 602 .device_interrupt = dp264_device_interrupt, 603 604 .init_arch = webbrick_init_arch, 605 .init_irq = dp264_init_irq, 606 .init_rtc = common_init_rtc, 607 .init_pci = common_init_pci, 608 .kill_arch = tsunami_kill_arch, 609 .pci_map_irq = webbrick_map_irq, 610 .pci_swizzle = common_swizzle, 611}; 612 613struct alpha_machine_vector clipper_mv __initmv = { 614 .vector_name = "Clipper", 615 DO_EV6_MMU, 616 DO_DEFAULT_RTC, 617 DO_TSUNAMI_IO, 618 .machine_check = tsunami_machine_check, 619 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 620 .min_io_address = DEFAULT_IO_BASE, 621 .min_mem_address = DEFAULT_MEM_BASE, 622 .pci_dac_offset = TSUNAMI_DAC_OFFSET, 623 624 .nr_irqs = 64, 625 .device_interrupt = dp264_device_interrupt, 626 627 .init_arch = tsunami_init_arch, 628 .init_irq = clipper_init_irq, 629 .init_rtc = common_init_rtc, 630 .init_pci = clipper_init_pci, 631 .kill_arch = tsunami_kill_arch, 632 .pci_map_irq = clipper_map_irq, 633 .pci_swizzle = common_swizzle, 634}; 635 636/* Sharks strongly resemble Clipper, at least as far 637 * as interrupt routing, etc, so we're using the 638 * same functions as Clipper does 639 */ 640 641struct alpha_machine_vector shark_mv __initmv = { 642 .vector_name = "Shark", 643 DO_EV6_MMU, 644 DO_DEFAULT_RTC, 645 DO_TSUNAMI_IO, 646 .machine_check = tsunami_machine_check, 647 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 648 .min_io_address = DEFAULT_IO_BASE, 649 .min_mem_address = DEFAULT_MEM_BASE, 650 .pci_dac_offset = TSUNAMI_DAC_OFFSET, 651 652 .nr_irqs = 64, 653 .device_interrupt = dp264_device_interrupt, 654 655 .init_arch = tsunami_init_arch, 656 .init_irq = clipper_init_irq, 657 .init_rtc = common_init_rtc, 658 .init_pci = common_init_pci, 659 .kill_arch = tsunami_kill_arch, 660 .pci_map_irq = clipper_map_irq, 661 .pci_swizzle = common_swizzle, 662}; 663 664/* No alpha_mv alias for webbrick/monet/clipper, since we compile them 665 in unconditionally with DP264; setup_arch knows how to cope. */ 666