1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner A83t USB PHY
8
9maintainers:
10  - Chen-Yu Tsai <wens@csie.org>
11  - Maxime Ripard <mripard@kernel.org>
12
13properties:
14  "#phy-cells":
15    const: 1
16
17  compatible:
18    const: allwinner,sun8i-a83t-usb-phy
19
20  reg:
21    items:
22      - description: PHY Control registers
23      - description: PHY PMU1 registers
24      - description: PHY PMU2 registers
25
26  reg-names:
27    items:
28      - const: phy_ctrl
29      - const: pmu1
30      - const: pmu2
31
32  clocks:
33    items:
34      - description: USB OTG PHY bus clock
35      - description: USB Host 0 PHY bus clock
36      - description: USB Host 1 PHY bus clock
37      - description: USB HSIC 12MHz clock
38
39  clock-names:
40    items:
41      - const: usb0_phy
42      - const: usb1_phy
43      - const: usb2_phy
44      - const: usb2_hsic_12M
45
46  resets:
47    items:
48      - description: USB OTG reset
49      - description: USB Host 1 Controller reset
50      - description: USB Host 2 Controller reset
51
52  reset-names:
53    items:
54      - const: usb0_reset
55      - const: usb1_reset
56      - const: usb2_reset
57
58  usb0_id_det-gpios:
59    maxItems: 1
60    description: GPIO to the USB OTG ID pin
61
62  usb0_vbus_det-gpios:
63    maxItems: 1
64    description: GPIO to the USB OTG VBUS detect pin
65
66  usb0_vbus_power-supply:
67    description: Power supply to detect the USB OTG VBUS
68
69  usb0_vbus-supply:
70    description: Regulator controlling USB OTG VBUS
71
72  usb1_vbus-supply:
73    description: Regulator controlling USB1 Host controller
74
75  usb2_vbus-supply:
76    description: Regulator controlling USB2 Host controller
77
78required:
79  - "#phy-cells"
80  - compatible
81  - clocks
82  - clock-names
83  - reg
84  - reg-names
85  - resets
86  - reset-names
87
88additionalProperties: false
89
90examples:
91  - |
92    #include <dt-bindings/gpio/gpio.h>
93    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
94    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
95
96    phy@1c19400 {
97        #phy-cells = <1>;
98        compatible = "allwinner,sun8i-a83t-usb-phy";
99        reg = <0x01c19400 0x10>,
100              <0x01c1a800 0x14>,
101              <0x01c1b800 0x14>;
102        reg-names = "phy_ctrl",
103                    "pmu1",
104                    "pmu2";
105        clocks = <&ccu CLK_USB_PHY0>,
106                 <&ccu CLK_USB_PHY1>,
107                 <&ccu CLK_USB_HSIC>,
108                 <&ccu CLK_USB_HSIC_12M>;
109        clock-names = "usb0_phy",
110                      "usb1_phy",
111                      "usb2_phy",
112                      "usb2_hsic_12M";
113        resets = <&ccu RST_USB_PHY0>,
114                 <&ccu RST_USB_PHY1>,
115                 <&ccu RST_USB_HSIC>;
116        reset-names = "usb0_reset",
117                      "usb1_reset",
118                      "usb2_reset";
119        usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
120        usb0_vbus_power-supply = <&usb_power_supply>;
121        usb0_vbus-supply = <&reg_drivevbus>;
122        usb1_vbus-supply = <&reg_usb1_vbus>;
123        usb2_vbus-supply = <&reg_usb2_vbus>;
124    };
125