1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
8
9maintainers:
10  - Rob Herring <robh@kernel.org>
11
12description: |
13  Flash chips (Memory Technology Devices) are often used for solid state
14  file systems on embedded devices.
15
16allOf:
17  - $ref: mtd.yaml#
18  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
19
20properties:
21  compatible:
22    oneOf:
23      - items:
24          - enum:
25              - amd,s29gl01gp
26              - amd,s29gl032a
27              - amd,s29gl256n
28              - amd,s29gl512n
29              - arm,versatile-flash
30              - arm,vexpress-flash
31              - cortina,gemini-flash
32              - cypress,hyperflash
33              - ge,imp3a-firmware-mirror
34              - ge,imp3a-paged-flash
35              - gef,ppc9a-firmware-mirror
36              - gef,ppc9a-paged-flash
37              - gef,sbc310-firmware-mirror
38              - gef,sbc310-paged-flash
39              - gef,sbc610-firmware-mirror
40              - gef,sbc610-paged-flash
41              - intel,28f128j3
42              - intel,dt28f160
43              - intel,ixp4xx-flash
44              - intel,JS28F128
45              - intel,JS28F640
46              - intel,PC28F640P30T85
47              - numonyx,js28f00a
48              - numonyx,js28f128
49              - sst,sst39vf320
50              - xlnx,xps-mch-emc-2.00.a
51          - enum:
52              - cfi-flash
53              - jedec-flash
54      - items:
55          - enum:
56              - cypress,cy7c1019dv33-10zsxi
57              - arm,vexpress-psram
58          - const: mtd-ram
59      - enum:
60          - cfi-flash
61          - jedec-flash
62          - mtd-ram
63          - mtd-rom
64
65  reg:
66    description: |
67      It's possible to (optionally) define multiple "reg" tuples so that
68      non-identical chips can be described in one node.
69    minItems: 1
70    maxItems: 8
71
72  bank-width:
73    description: Width (in bytes) of the bank.  Equal to the device width times
74      the number of interleaved chips.
75    $ref: /schemas/types.yaml#/definitions/uint32
76    enum: [ 1, 2, 4 ]
77
78  device-width:
79    description:
80      Width of a single mtd chip. If omitted, assumed to be equal to 'bank-width'.
81    $ref: /schemas/types.yaml#/definitions/uint32
82    enum: [ 1, 2 ]
83
84  no-unaligned-direct-access:
85    type: boolean
86    description: |
87      Disables the default direct mapping of the flash.
88
89      On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause problems
90      with JFFS2 usage, as the local bus (LPB) doesn't support unaligned
91      accesses as implemented in the JFFS2 code via memcpy(). By defining
92      "no-unaligned-direct-access", the flash will not be exposed directly to
93      the MTD users (e.g. JFFS2) any more.
94
95  linux,mtd-name:
96    description:
97      Allows specifying the mtd name for retro capability with physmap-flash
98      drivers as boot loader pass the mtd partition via the old device name
99      physmap-flash.
100    $ref: /schemas/types.yaml#/definitions/string
101
102  use-advanced-sector-protection:
103    type: boolean
104    description: |
105      Enables support for the advanced sector protection (Spansion: PPB -
106      Persistent Protection Bits) locking.
107
108  erase-size:
109    description: The chip's physical erase block size in bytes.
110    $ref: /schemas/types.yaml#/definitions/uint32
111
112  addr-gpios:
113    description:
114      List of GPIO descriptors that will be used to address the MSBs address
115      lines. The order goes from LSB to MSB.
116    minItems: 1
117    maxItems: 8
118
119  '#address-cells':
120    const: 1
121
122  '#size-cells':
123    const: 1
124
125  big-endian: true
126  little-endian: true
127
128required:
129  - compatible
130  - reg
131
132if:
133  properties:
134    compatible:
135      contains:
136        const: cortina,gemini-flash
137then:
138  properties:
139    syscon:
140      $ref: /schemas/types.yaml#/definitions/phandle
141      description:
142        Phandle to the syscon controller
143  required:
144    - syscon
145
146# FIXME: A parent bus may define timing properties
147additionalProperties: true
148
149examples:
150  - |
151
152    flash@ff000000 {
153        compatible = "cfi-flash";
154        reg = <0xff000000 0x01000000>;
155        bank-width = <4>;
156        device-width = <1>;
157
158        #address-cells = <1>;
159        #size-cells = <1>;
160        ranges = <0 0xff000000 0x01000000>;
161
162        fs@0 {
163            label = "fs";
164            reg = <0 0xf80000>;
165        };
166        firmware@f80000 {
167            label = "firmware";
168            reg = <0xf80000 0x80000>;
169            read-only;
170        };
171    };
172
173  - |
174    /* An example with multiple "reg" tuples */
175
176    flash@0 {
177        compatible = "intel,PC28F640P30T85", "cfi-flash";
178        reg = <0x00000000 0x02000000>,
179              <0x02000000 0x02000000>;
180        bank-width = <2>;
181
182        #address-cells = <1>;
183        #size-cells = <1>;
184        ranges = <0 0 0x04000000>;
185
186        partition@0 {
187            label = "test-part1";
188            reg = <0 0x04000000>;
189        };
190    };
191
192  - |
193    /* An example using SRAM */
194    bus {
195        #address-cells = <2>;
196        #size-cells = <1>;
197
198        sram@2,0 {
199            compatible = "mtd-ram";
200            reg = <2 0 0x00200000>;
201            bank-width = <2>;
202        };
203    };
204
205  - |
206    /* An example using addr-gpios */
207    #include <dt-bindings/gpio/gpio.h>
208
209    flash@20000000 {
210        compatible = "cfi-flash";
211        reg = <0x20000000 0x02000000>;
212        bank-width = <2>;
213        addr-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
214
215        #address-cells = <1>;
216        #size-cells = <1>;
217        ranges = <0 0x00000000 0x02000000>,
218                 <1 0x02000000 0x02000000>;
219
220        partition@0 {
221            label = "test-part1";
222            reg = <0 0x04000000>;
223        };
224    };
225...
226