1Gateworks PLD GPIO controller bindings
2
3The GPIO controller should be a child node on an I2C bus.
4
5Required properties:
6- compatible: Should be "gateworks,pld-gpio"
7- reg: I2C slave address
8- gpio-controller: Marks the device node as a GPIO controller.
9- #gpio-cells: Should be <2>. The first cell is the gpio number and
10  the second cell is used to specify optional parameters.
11
12Example:
13
14pld@56 {
15	compatible = "gateworks,pld-gpio";
16	reg = <0x56>;
17	gpio-controller;
18	#gpio-cells = <2>;
19};
20