1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Broadcom Kona family GPIO controller
8
9description:
10  The Broadcom GPIO Controller IP can be configured prior to synthesis to
11  support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
12  GPIO controller only supports edge, not level, triggering of interrupts.
13
14maintainers:
15  - Ray Jui <rjui@broadcom.com>
16
17properties:
18  compatible:
19    items:
20      - enum:
21          - brcm,bcm11351-gpio
22          - brcm,bcm21664-gpio
23          - brcm,bcm23550-gpio
24      - const: brcm,kona-gpio
25
26  reg:
27    maxItems: 1
28
29  interrupts:
30    minItems: 4
31    maxItems: 6
32    description:
33      The interrupt outputs from the controller. There is one GPIO interrupt
34      per GPIO bank. The number of interrupts listed depends on the number of
35      GPIO banks on the SoC. The interrupts must be ordered by bank, starting
36      with bank 0. There is always a 1:1 mapping between banks and IRQs.
37
38  '#gpio-cells':
39    const: 2
40
41  '#interrupt-cells':
42    const: 2
43
44  gpio-controller: true
45
46  interrupt-controller: true
47
48required:
49  - compatible
50  - reg
51  - interrupts
52  - '#gpio-cells'
53  - '#interrupt-cells'
54  - gpio-controller
55  - interrupt-controller
56
57allOf:
58  - if:
59      properties:
60        compatible:
61          contains:
62            const: brcm,bcm11351-gpio
63    then:
64      properties:
65        interrupts:
66          minItems: 6
67  - if:
68      properties:
69        compatible:
70          contains:
71            enum:
72              - brcm,bcm21664-gpio
73              - brcm,bcm23550-gpio
74    then:
75      properties:
76        interrupts:
77          maxItems: 4
78
79additionalProperties: false
80
81examples:
82  - |
83    #include <dt-bindings/interrupt-controller/arm-gic.h>
84    #include <dt-bindings/interrupt-controller/irq.h>
85
86    gpio@35003000 {
87        compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
88        reg = <0x35003000 0x800>;
89        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
90                     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
91                     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
92                     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
93                     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
94                     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
95        #gpio-cells = <2>;
96        #interrupt-cells = <2>;
97        gpio-controller;
98        interrupt-controller;
99    };
100...
101