1===================================
2DSCR (Data Stream Control Register)
3===================================
4
5DSCR register in powerpc allows user to have some control of prefetch of data
6stream in the processor. Please refer to the ISA documents or related manual
7for more detailed information regarding how to use this DSCR to attain this
8control of the prefetches . This document here provides an overview of kernel
9support for DSCR, related kernel objects, its functionalities and exported
10user interface.
11
12(A) Data Structures:
13
14	(1) thread_struct::
15
16		dscr		/* Thread DSCR value */
17		dscr_inherit	/* Thread has changed default DSCR */
18
19	(2) PACA::
20
21		dscr_default	/* per-CPU DSCR default value */
22
23	(3) sysfs.c::
24
25		dscr_default	/* System DSCR default value */
26
27(B) Scheduler Changes:
28
29	Scheduler will write the per-CPU DSCR default which is stored in the
30	CPU's PACA value into the register if the thread has dscr_inherit value
31	cleared which means that it has not changed the default DSCR till now.
32	If the dscr_inherit value is set which means that it has changed the
33	default DSCR value, scheduler will write the changed value which will
34	now be contained in thread struct's dscr into the register instead of
35	the per-CPU default PACA based DSCR value.
36
37	NOTE: Please note here that the system wide global DSCR value never
38	gets used directly in the scheduler process context switch at all.
39
40(C) SYSFS Interface:
41
42	- Global DSCR default:		/sys/devices/system/cpu/dscr_default
43	- CPU specific DSCR default:	/sys/devices/system/cpu/cpuN/dscr
44
45	Changing the global DSCR default in the sysfs will change all the CPU
46	specific DSCR defaults immediately in their PACA structures. Again if
47	the current process has the dscr_inherit clear, it also writes the new
48	value into every CPU's DSCR register right away and updates the current
49	thread's DSCR value as well.
50
51	Changing the CPU specific DSCR default value in the sysfs does exactly
52	the same thing as above but unlike the global one above, it just changes
53	stuff for that particular CPU instead for all the CPUs on the system.
54
55(D) User Space Instructions:
56
57	The DSCR register can be accessed in the user space using any of these
58	two SPR numbers available for that purpose.
59
60	(1) Problem state SPR:		0x03	(Un-privileged, POWER8 only)
61	(2) Privileged state SPR:	0x11	(Privileged)
62
63	Accessing DSCR through privileged SPR number (0x11) from user space
64	works, as it is emulated following an illegal instruction exception
65	inside the kernel. Both mfspr and mtspr instructions are emulated.
66
67	Accessing DSCR through user level SPR (0x03) from user space will first
68	create a facility unavailable exception. Inside this exception handler
69	all mfspr instruction based read attempts will get emulated and returned
70	where as the first mtspr instruction based write attempts will enable
71	the DSCR facility for the next time around (both for read and write) by
72	setting DSCR facility in the FSCR register.
73
74(E) Specifics about 'dscr_inherit':
75
76	The thread struct element 'dscr_inherit' represents whether the thread
77	in question has attempted and changed the DSCR itself using any of the
78	following methods. This element signifies whether the thread wants to
79	use the CPU default DSCR value or its own changed DSCR value in the
80	kernel.
81
82		(1) mtspr instruction	(SPR number 0x03)
83		(2) mtspr instruction	(SPR number 0x11)
84		(3) ptrace interface	(Explicitly set user DSCR value)
85
86	Any child of the process created after this event in the process inherits
87	this same behaviour as well.
88