1/*- 2 * SPDX-License-Identifier: ISC 3 * 4 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 5 * Copyright (c) 2002-2006 Atheros Communications, Inc. 6 * 7 * Permission to use, copy, modify, and/or distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 * 19 * $FreeBSD: releng/12.0/sys/dev/ath/ath_hal/ar5211/ar5211_beacon.c 326695 2017-12-08 15:57:29Z pfg $ 20 */ 21#include "opt_ah.h" 22 23#include "ah.h" 24#include "ah_internal.h" 25 26#include "ar5211/ar5211.h" 27#include "ar5211/ar5211reg.h" 28#include "ar5211/ar5211desc.h" 29 30/* 31 * Routines used to initialize and generated beacons for the AR5211/AR5311. 32 */ 33 34/* 35 * Return the hardware NextTBTT in TSF 36 */ 37uint64_t 38ar5211GetNextTBTT(struct ath_hal *ah) 39{ 40#define TU_TO_TSF(_tu) (((uint64_t)(_tu)) << 10) 41 return TU_TO_TSF(OS_REG_READ(ah, AR_TIMER0)); 42#undef TU_TO_TSF 43} 44 45/* 46 * Initialize all of the hardware registers used to send beacons. 47 */ 48void 49ar5211SetBeaconTimers(struct ath_hal *ah, const HAL_BEACON_TIMERS *bt) 50{ 51 52 OS_REG_WRITE(ah, AR_TIMER0, bt->bt_nexttbtt); 53 OS_REG_WRITE(ah, AR_TIMER1, bt->bt_nextdba); 54 OS_REG_WRITE(ah, AR_TIMER2, bt->bt_nextswba); 55 OS_REG_WRITE(ah, AR_TIMER3, bt->bt_nextatim); 56 /* 57 * Set the Beacon register after setting all timers. 58 */ 59 OS_REG_WRITE(ah, AR_BEACON, bt->bt_intval); 60} 61 62/* 63 * Legacy api to initialize all of the beacon registers. 64 */ 65void 66ar5211BeaconInit(struct ath_hal *ah, 67 uint32_t next_beacon, uint32_t beacon_period) 68{ 69 HAL_BEACON_TIMERS bt; 70 71 bt.bt_nexttbtt = next_beacon; 72 /* 73 * TIMER1: in AP/adhoc mode this controls the DMA beacon 74 * alert timer; otherwise it controls the next wakeup time. 75 * TIMER2: in AP mode, it controls the SBA beacon alert 76 * interrupt; otherwise it sets the start of the next CFP. 77 */ 78 switch (AH_PRIVATE(ah)->ah_opmode) { 79 case HAL_M_STA: 80 case HAL_M_MONITOR: 81 bt.bt_nextdba = 0xffff; 82 bt.bt_nextswba = 0x7ffff; 83 break; 84 case HAL_M_IBSS: 85 case HAL_M_HOSTAP: 86 bt.bt_nextdba = (next_beacon - 87 ah->ah_config.ah_dma_beacon_response_time) << 3; /* 1/8 TU */ 88 bt.bt_nextswba = (next_beacon - 89 ah->ah_config.ah_sw_beacon_response_time) << 3; /* 1/8 TU */ 90 break; 91 } 92 /* 93 * Set the ATIM window 94 * Our hardware does not support an ATIM window of 0 95 * (beacons will not work). If the ATIM windows is 0, 96 * force it to 1. 97 */ 98 bt.bt_nextatim = next_beacon + 1; 99 bt.bt_intval = beacon_period & 100 (AR_BEACON_PERIOD | AR_BEACON_RESET_TSF | AR_BEACON_EN); 101 ar5211SetBeaconTimers(ah, &bt); 102} 103 104void 105ar5211ResetStaBeaconTimers(struct ath_hal *ah) 106{ 107 uint32_t val; 108 109 OS_REG_WRITE(ah, AR_TIMER0, 0); /* no beacons */ 110 val = OS_REG_READ(ah, AR_STA_ID1); 111 val |= AR_STA_ID1_PWR_SAV; /* XXX */ 112 /* tell the h/w that the associated AP is not PCF capable */ 113 OS_REG_WRITE(ah, AR_STA_ID1, 114 val & ~(AR_STA_ID1_DEFAULT_ANTENNA | AR_STA_ID1_PCF)); 115 OS_REG_WRITE(ah, AR_BEACON, AR_BEACON_PERIOD); 116} 117 118/* 119 * Set all the beacon related bits on the h/w for stations 120 * i.e. initializes the corresponding h/w timers; 121 * also tells the h/w whether to anticipate PCF beacons 122 */ 123void 124ar5211SetStaBeaconTimers(struct ath_hal *ah, const HAL_BEACON_STATE *bs) 125{ 126 struct ath_hal_5211 *ahp = AH5211(ah); 127 128 HALDEBUG(ah, HAL_DEBUG_BEACON, "%s: setting beacon timers\n", __func__); 129 130 HALASSERT(bs->bs_intval != 0); 131 /* if the AP will do PCF */ 132 if (bs->bs_cfpmaxduration != 0) { 133 /* tell the h/w that the associated AP is PCF capable */ 134 OS_REG_WRITE(ah, AR_STA_ID1, 135 OS_REG_READ(ah, AR_STA_ID1) | AR_STA_ID1_PCF); 136 137 /* set CFP_PERIOD(1.024ms) register */ 138 OS_REG_WRITE(ah, AR_CFP_PERIOD, bs->bs_cfpperiod); 139 140 /* set CFP_DUR(1.024ms) register to max cfp duration */ 141 OS_REG_WRITE(ah, AR_CFP_DUR, bs->bs_cfpmaxduration); 142 143 /* set TIMER2(128us) to anticipated time of next CFP */ 144 OS_REG_WRITE(ah, AR_TIMER2, bs->bs_cfpnext << 3); 145 } else { 146 /* tell the h/w that the associated AP is not PCF capable */ 147 OS_REG_WRITE(ah, AR_STA_ID1, 148 OS_REG_READ(ah, AR_STA_ID1) &~ AR_STA_ID1_PCF); 149 } 150 151 /* 152 * Set TIMER0(1.024ms) to the anticipated time of the next beacon. 153 */ 154 OS_REG_WRITE(ah, AR_TIMER0, bs->bs_nexttbtt); 155 156 /* 157 * Start the beacon timers by setting the BEACON register 158 * to the beacon interval; also write the tim offset which 159 * we should know by now. The code, in ar5211WriteAssocid, 160 * also sets the tim offset once the AID is known which can 161 * be left as such for now. 162 */ 163 OS_REG_WRITE(ah, AR_BEACON, 164 (OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_PERIOD|AR_BEACON_TIM)) 165 | SM(bs->bs_intval, AR_BEACON_PERIOD) 166 | SM(bs->bs_timoffset ? bs->bs_timoffset + 4 : 0, AR_BEACON_TIM) 167 ); 168 169 /* 170 * Configure the BMISS interrupt. Note that we 171 * assume the caller blocks interrupts while enabling 172 * the threshold. 173 */ 174 HALASSERT(bs->bs_bmissthreshold <= MS(0xffffffff, AR_RSSI_THR_BM_THR)); 175 ahp->ah_rssiThr = (ahp->ah_rssiThr &~ AR_RSSI_THR_BM_THR) 176 | SM(bs->bs_bmissthreshold, AR_RSSI_THR_BM_THR); 177 OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr); 178 179 /* 180 * Set the sleep duration in 1/8 TU's. 181 */ 182#define SLEEP_SLOP 3 183 OS_REG_RMW_FIELD(ah, AR_SCR, AR_SCR_SLDUR, 184 (bs->bs_sleepduration - SLEEP_SLOP) << 3); 185#undef SLEEP_SLOP 186} 187