1/* NV Acceleration functions */ 2/* Author: 3 Rudolf Cornelissen 8/2003-5/2009. 4 5 This code was possible thanks to: 6 - the Linux XFree86 NV driver, 7 - the Linux UtahGLX 3D driver. 8*/ 9 10/* 11 note: 12 Can't get NV40 and higher going using this PIO mode acceleration system ATM. 13 Here's the problem: 14 The FIFO is not functioning correctly: the proof of this is that you can only 15 readout the PIO FIFO fill-level register (FifoFree) once before it stops responding 16 (returns only zeros on all reads after the first one). 17 You can see the issued commands are actually placed in the FIFO because the first 18 read of FifoFree corresponds to what you'd expect. 19 There is no visual confirmation of any command actually being executed by the 20 acceleration engine, so we don't know if the FIFO places commands in the engine. 21 BTW: 22 The FifoFree register exhibits the exact same behaviour in DMA acceleration mode. 23 It's no problem there because we use the DMAPut and DMAGet registers instead. 24 25 The non-functioning Fifo in PIO mode might have one of these reasons: 26 - lack of specs: maybe additional programming is required. 27 - hardware fault: as probably no-one uses PIO mode acceleration anymore these days, 28 nVidia might not care about this any longer. 29 30 note also: 31 Keeping this PIO mode acceleration stuff here for now to guarantee compatibility 32 with current 3D acceleration attempts: the utahGLX 3D driver cooperated with the 33 PIO mode acceleration functions in the XFree drivers (upto/including XFree 4.2.0). 34*/ 35 36#define MODULE_BIT 0x00080000 37 38#include "nv_std.h" 39 40static void nv_init_for_3D(void); 41 42/*acceleration notes*/ 43 44/*functions Be's app_server uses: 45fill span (horizontal only) 46fill rectangle (these 2 are very similar) 47invert rectangle 48blit 49*/ 50 51/* 52 nVidia hardware info: 53 We should be able to do FIFO assignment setup changes on-the-fly now, using 54 all the engine-command-handles that are pre-defined on any FIFO channel. 55 Also we should be able to setup new additional handles to previously unused 56 engine commands now. 57*/ 58 59/* FIFO channel pointers */ 60/* note: 61 * every instance of the accelerant needs to have it's own pointers, as the registers 62 * are cloned to different adress ranges for each one */ 63static cmd_nv_rop5_solid* nv_rop5_solid_ptr; 64static cmd_nv_image_black_rectangle* nv_image_black_rectangle_ptr; 65static cmd_nv_image_pattern* nv_image_pattern_ptr; 66static cmd_nv_image_blit* nv_image_blit_ptr; 67static cmd_nv3_gdi_rectangle_text* nv3_gdi_rectangle_text_ptr; 68 69status_t nv_acc_wait_idle() 70{ 71 /* wait until engine completely idle */ 72 while (ACCR(STATUS)) 73 { 74 /* snooze a bit so I do not hammer the bus */ 75 snooze (100); 76 } 77 78 return B_OK; 79} 80 81/* AFAIK this must be done for every new screenmode. 82 * Engine required init. */ 83status_t nv_acc_init() 84{ 85 uint16 cnt; 86 87 /* a hanging engine only recovers from a complete power-down/power-up cycle */ 88 NV_REG32(NV32_PWRUPCTRL) = 0xffff00ff; 89 snooze(1000); 90 NV_REG32(NV32_PWRUPCTRL) = 0xffffffff; 91 92 /* setup PTIMER: */ 93 //fixme? how about NV28 setup as just after coldstarting? (see nv_info.c) 94 /* set timer numerator to 8 (in b0-15) */ 95 ACCW(PT_NUMERATOR, 0x00000008); 96 /* set timer denominator to 3 (in b0-15) */ 97 ACCW(PT_DENOMINATR, 0x00000003); 98 99 /* disable timer-alarm INT requests (b0) */ 100 ACCW(PT_INTEN, 0x00000000); 101 /* reset timer-alarm INT status bit (b0) */ 102 ACCW(PT_INTSTAT, 0xffffffff); 103 104 /* enable PRAMIN write access on pre NV10 before programming it! */ 105 if (si->ps.card_arch == NV04A) 106 { 107 /* set framebuffer config: type = notiling, PRAMIN write access enabled */ 108 NV_REG32(NV32_PFB_CONFIG_0) = 0x00001114; 109 } 110 111 /*** PFIFO ***/ 112 /* (setup caches) */ 113 /* disable caches reassign */ 114 ACCW(PF_CACHES, 0x00000000); 115 /* PFIFO mode for all 32 channels is PIO (instead of DMA) */ 116 ACCW(PF_MODE, 0x00000000); 117 /* cache1 push0 access disabled */ 118 ACCW(PF_CACH1_PSH0, 0x00000000); 119 /* cache1 pull0 access disabled */ 120 ACCW(PF_CACH1_PUL0, 0x00000000); 121 /* cache1 push1 mode = pio (disable DMA use) */ 122 ACCW(PF_CACH1_PSH1, 0x00000000); 123 /* cache1 DMA Put offset = 0 (b2-28) */ 124 ACCW(PF_CACH1_DMAP, 0x00000000); 125 /* cache1 DMA Get offset = 0 (b2-28) */ 126 ACCW(PF_CACH1_DMAG, 0x00000000); 127 /* cache1 DMA instance adress = none (b0-15); 128 * instance being b4-19 with baseadress NV_PRAMIN_CTX_0 (0x00700000). */ 129 /* note: 130 * should point to a DMA definition in CTX register space (which is sort of RAM). 131 * This define tells the engine where the DMA cmd buffer is and what it's size is. 132 * Inside that cmd buffer you'll find the actual issued engine commands. */ 133 ACCW(PF_CACH1_DMAI, 0x00000000); 134 /* cache0 push0 access disabled */ 135 ACCW(PF_CACH0_PSH0, 0x00000000); 136 /* cache0 pull0 access disabled */ 137 ACCW(PF_CACH0_PUL0, 0x00000000); 138 /* RAM HT (hash table) baseadress = $10000 (b4-8), size = 4k, 139 * search = 128 (is byte offset between hash 'sets') */ 140 /* note: 141 * so HT base is $00710000, last is $00710fff. 142 * In this space you define the engine command handles (HT_HANDL_XX), which 143 * in turn points to the defines in CTX register space (which is sort of RAM) */ 144 ACCW(PF_RAMHT, 0x03000100); 145 /* RAM FC baseadress = $11000 (b3-8) (size is fixed to 0.5k(?)) */ 146 /* note: 147 * so FC base is $00711000, last is $007111ff. (not used?) */ 148 ACCW(PF_RAMFC, 0x00000110); 149 /* RAM RO baseadress = $11200 (b1-8), size = 0.5k */ 150 /* note: 151 * so RO base is $00711200, last is $007113ff. (not used?) */ 152 /* note also: 153 * This means(?) the PRAMIN CTX registers are accessible from base $00711400. */ 154 ACCW(PF_RAMRO, 0x00000112); 155 /* PFIFO size: ch0-15 = 512 bytes, ch16-31 = 124 bytes */ 156 ACCW(PF_SIZE, 0x0000ffff); 157 /* cache1 hash instance = $ffff (b0-15) */ 158 ACCW(PF_CACH1_HASH, 0x0000ffff); 159 /* disable all PFIFO INTs */ 160 ACCW(PF_INTEN, 0x00000000); 161 /* reset all PFIFO INT status bits */ 162 ACCW(PF_INTSTAT, 0xffffffff); 163 /* cache0 pull0 engine = acceleration engine (graphics) */ 164 ACCW(PF_CACH0_PUL1, 0x00000001); 165 /* cache1 DMA control: disable some stuff */ 166 ACCW(PF_CACH1_DMAC, 0x00000000); 167 /* cache1 engine 0 upto/including 7 is software (could also be graphics or DVD) */ 168 ACCW(PF_CACH1_ENG, 0x00000000); 169 /* cache1 DMA fetch: trigger at 128 bytes, size is 32 bytes, max requests is 15, 170 * use little endian */ 171 ACCW(PF_CACH1_DMAF, 0x000f0078); 172 /* cache1 DMA push: b0=0 is access disabled */ 173 ACCW(PF_CACH1_DMAS, 0x00000000); 174 /* cache1 push0 access enabled */ 175 ACCW(PF_CACH1_PSH0, 0x00000001); 176 /* cache1 pull0 access enabled */ 177 ACCW(PF_CACH1_PUL0, 0x00000001); 178 /* cache1 pull1 engine = acceleration engine (graphics) */ 179 ACCW(PF_CACH1_PUL1, 0x00000001); 180 /* enable PFIFO caches reassign */ 181 ACCW(PF_CACHES, 0x00000001); 182 183 /*** PRAMIN ***/ 184 /* first clear the entire RAMHT (hash-table) space to a defined state. It turns 185 * out at least NV11 will keep the previously programmed handles over resets and 186 * power-outages upto about 15 seconds!! Faulty entries might well hang the 187 * engine (confirmed on NV11). 188 * Note: 189 * this behaviour is not very strange: even very old DRAM chips are known to be 190 * able to do this, even though you should refresh them every few milliseconds or 191 * so. (Large memory cell capacitors, though different cells vary a lot in their 192 * capacity.) 193 * Of course data validity is not certain by a long shot over this large 194 * amount of time.. */ 195 for(cnt = 0; cnt < 0x0400; cnt++) 196 NV_REG32(NVACC_HT_HANDL_00 + (cnt << 2)) = 0; 197 /* RAMHT space (hash-table) SETUP FIFO HANDLES */ 198 /* note: 199 * 'instance' tells you where the engine command is stored in 'PR_CTXx_x' sets 200 * below: instance being b4-19 with baseadress NV_PRAMIN_CTX_0 (0x00700000). 201 * That command is linked to the handle noted here. This handle is then used to 202 * tell the FIFO to which engine command it is connected! 203 * (CTX registers are actually a sort of RAM space.) */ 204 if (si->ps.card_arch >= NV40A) 205 { 206 /* (first set) */ 207 ACCW(HT_HANDL_00, (0x80000000 | NV10_CONTEXT_SURFACES_2D)); /* 32bit handle (not used) */ 208 ACCW(HT_VALUE_00, 0x0010114c); /* instance $114c, engine = acc engine, CHID = $00 */ 209 210 ACCW(HT_HANDL_01, (0x80000000 | NV_IMAGE_BLIT)); /* 32bit handle */ 211 ACCW(HT_VALUE_01, 0x00101148); /* instance $1148, engine = acc engine, CHID = $00 */ 212 213 ACCW(HT_HANDL_02, (0x80000000 | NV4_GDI_RECTANGLE_TEXT)); /* 32bit handle */ 214 ACCW(HT_VALUE_02, 0x0010114a); /* instance $114a, engine = acc engine, CHID = $00 */ 215 216 /* (second set) */ 217 ACCW(HT_HANDL_10, (0x80000000 | NV_ROP5_SOLID)); /* 32bit handle */ 218 ACCW(HT_VALUE_10, 0x00101142); /* instance $1142, engine = acc engine, CHID = $00 */ 219 220 ACCW(HT_HANDL_11, (0x80000000 | NV_IMAGE_BLACK_RECTANGLE)); /* 32bit handle */ 221 ACCW(HT_VALUE_11, 0x00101144); /* instance $1144, engine = acc engine, CHID = $00 */ 222 223 ACCW(HT_HANDL_12, (0x80000000 | NV_IMAGE_PATTERN)); /* 32bit handle */ 224 ACCW(HT_VALUE_12, 0x00101146); /* instance $1146, engine = acc engine, CHID = $00 */ 225 } 226 else 227 { 228 /* (first set) */ 229 ACCW(HT_HANDL_00, (0x80000000 | NV4_SURFACE)); /* 32bit handle */ 230 ACCW(HT_VALUE_00, 0x80011145); /* instance $1145, engine = acc engine, CHID = $00 */ 231 232 ACCW(HT_HANDL_01, (0x80000000 | NV_IMAGE_BLIT)); /* 32bit handle */ 233 ACCW(HT_VALUE_01, 0x80011146); /* instance $1146, engine = acc engine, CHID = $00 */ 234 235 ACCW(HT_HANDL_02, (0x80000000 | NV4_GDI_RECTANGLE_TEXT)); /* 32bit handle */ 236 ACCW(HT_VALUE_02, 0x80011147); /* instance $1147, engine = acc engine, CHID = $00 */ 237 238 ACCW(HT_HANDL_03, (0x80000000 | NV4_CONTEXT_SURFACES_ARGB_ZS)); /* 32bit handle (3D) */ 239 ACCW(HT_VALUE_03, 0x80011148); /* instance $1148, engine = acc engine, CHID = $00 */ 240 241 /* NV4_ and NV10_DX5_TEXTURE_TRIANGLE should be identical */ 242 ACCW(HT_HANDL_04, (0x80000000 | NV4_DX5_TEXTURE_TRIANGLE)); /* 32bit handle (3D) */ 243 ACCW(HT_VALUE_04, 0x80011149); /* instance $1149, engine = acc engine, CHID = $00 */ 244 245 /* NV4_ and NV10_DX6_MULTI_TEXTURE_TRIANGLE should be identical */ 246 ACCW(HT_HANDL_05, (0x80000000 | NV4_DX6_MULTI_TEXTURE_TRIANGLE)); /* 32bit handle (not used) */ 247 ACCW(HT_VALUE_05, 0x8001114a); /* instance $114a, engine = acc engine, CHID = $00 */ 248 249 ACCW(HT_HANDL_06, (0x80000000 | NV1_RENDER_SOLID_LIN)); /* 32bit handle (not used) */ 250 ACCW(HT_VALUE_06, 0x8001114b); /* instance $114b, engine = acc engine, CHID = $00 */ 251 252 /* (second set) */ 253 ACCW(HT_HANDL_10, (0x80000000 | NV_ROP5_SOLID)); /* 32bit handle */ 254 ACCW(HT_VALUE_10, 0x80011142); /* instance $1142, engine = acc engine, CHID = $00 */ 255 256 ACCW(HT_HANDL_11, (0x80000000 | NV_IMAGE_BLACK_RECTANGLE)); /* 32bit handle */ 257 ACCW(HT_VALUE_11, 0x80011143); /* instance $1143, engine = acc engine, CHID = $00 */ 258 259 ACCW(HT_HANDL_12, (0x80000000 | NV_IMAGE_PATTERN)); /* 32bit handle */ 260 ACCW(HT_VALUE_12, 0x80011144); /* instance $1144, engine = acc engine, CHID = $00 */ 261 } 262 263 /* program CTX registers: CTX1 is mostly done later (colorspace dependant) */ 264 /* note: 265 * CTX determines which HT handles point to what engine commands. */ 266 /* note also: 267 * CTX registers are in fact in the same GPU internal RAM space as the engine's 268 * hashtable. This means that stuff programmed in here also survives resets and 269 * power-outages! (confirmed NV11) */ 270 if (si->ps.card_arch >= NV40A) 271 { 272 /* setup a DMA define for use by command defines below. */ 273 ACCW(PR_CTX0_R, 0x00003000); /* DMA page table present and of linear type; 274 * DMA target node is NVM (non-volatile memory?) 275 * (instead of doing PCI or AGP transfers) */ 276 ACCW(PR_CTX1_R, (si->ps.memory_size - 1)); /* DMA limit: size is all cardRAM */ 277 ACCW(PR_CTX2_R, ((0x00000000 & 0xfffff000) | 0x00000002)); 278 /* DMA access type is READ_AND_WRITE; 279 * memory starts at start of cardRAM (b12-31): 280 * It's adress needs to be at a 4kb boundary! */ 281 ACCW(PR_CTX3_R, 0x00000002); /* unknown (looks like this is rubbish/not needed?) */ 282 /* setup set '0' for cmd NV_ROP5_SOLID */ 283 ACCW(PR_CTX0_0, 0x02080043); /* NVclass $043, patchcfg ROP_AND, nv10+: little endian */ 284 ACCW(PR_CTX2_0, 0x00000000); /* DMA0 and DMA1 instance invalid */ 285 ACCW(PR_CTX3_0, 0x00000000); /* method traps disabled */ 286 ACCW(PR_CTX0_1, 0x00000000); /* extra */ 287 ACCW(PR_CTX1_1, 0x00000000); /* extra */ 288 /* setup set '1' for cmd NV_IMAGE_BLACK_RECTANGLE */ 289 ACCW(PR_CTX0_2, 0x02080019); /* NVclass $019, patchcfg ROP_AND, nv10+: little endian */ 290 ACCW(PR_CTX2_2, 0x00000000); /* DMA0 and DMA1 instance invalid */ 291 ACCW(PR_CTX3_2, 0x00000000); /* method traps disabled */ 292 ACCW(PR_CTX0_3, 0x00000000); /* extra */ 293 ACCW(PR_CTX1_3, 0x00000000); /* extra */ 294 /* setup set '2' for cmd NV_IMAGE_PATTERN */ 295 ACCW(PR_CTX0_4, 0x02080018); /* NVclass $018, patchcfg ROP_AND, nv10+: little endian */ 296 ACCW(PR_CTX2_4, 0x00000000); /* DMA0 and DMA1 instance invalid */ 297 ACCW(PR_CTX3_4, 0x00000000); /* method traps disabled */ 298 ACCW(PR_CTX0_5, 0x00000000); /* extra */ 299 ACCW(PR_CTX1_5, 0x00000000); /* extra */ 300 /* setup set '4' for cmd NV_IMAGE_BLIT */ 301 ACCW(PR_CTX0_6, 0x0208005f); /* NVclass $05f, patchcfg ROP_AND, nv10+: little endian */ 302 ACCW(PR_CTX2_6, 0x00000000); /* DMA0 and DMA1 instance invalid */ 303 ACCW(PR_CTX3_6, 0x00000000); /* method traps disabled */ 304 ACCW(PR_CTX0_7, 0x00000000); /* extra */ 305 ACCW(PR_CTX1_7, 0x00000000); /* extra */ 306 /* setup set '5' for cmd NV4_GDI_RECTANGLE_TEXT */ 307 ACCW(PR_CTX0_8, 0x0208004a); /* NVclass $04a, patchcfg ROP_AND, nv10+: little endian */ 308 ACCW(PR_CTX2_8, 0x00000000); /* DMA0 and DMA1 instance invalid */ 309 ACCW(PR_CTX3_8, 0x00000000); /* method traps disabled */ 310 ACCW(PR_CTX0_9, 0x00000000); /* extra */ 311 ACCW(PR_CTX1_9, 0x00000000); /* extra */ 312 /* setup set '6' for cmd NV10_CONTEXT_SURFACES_2D */ 313 ACCW(PR_CTX0_A, 0x02080062); /* NVclass $062, nv10+: little endian */ 314 ACCW(PR_CTX2_A, 0x00001140); /* DMA0 instance is $1140, DMA1 instance invalid */ 315 ACCW(PR_CTX3_A, 0x00001140); /* method trap 0 is $1140, trap 1 disabled */ 316 ACCW(PR_CTX0_B, 0x00000000); /* extra */ 317 ACCW(PR_CTX1_B, 0x00000000); /* extra */ 318 } 319 else 320 { 321 /* setup a DMA define for use by command defines below. 322 * (would currently be used by CTX 'sets' 0x6 upto/including 0xe: 3D stuff.) */ 323 ACCW(PR_CTX0_R, 0x00003000); /* DMA page table present and of linear type; 324 * DMA target node is NVM (non-volatile memory?) 325 * (instead of doing PCI or AGP transfers) */ 326 ACCW(PR_CTX1_R, (si->ps.memory_size - 1)); /* DMA limit: size is all cardRAM */ 327 ACCW(PR_CTX2_R, ((0x00000000 & 0xfffff000) | 0x00000002)); 328 /* DMA access type is READ_AND_WRITE; 329 * memory starts at start of cardRAM (b12-31): 330 * It's adress needs to be at a 4kb boundary! */ 331 ACCW(PR_CTX3_R, 0x00000002); /* unknown (looks like this is rubbish/not needed?) */ 332 /* setup set '0' for cmd NV_ROP5_SOLID */ 333 ACCW(PR_CTX0_0, 0x01008043); /* NVclass $043, patchcfg ROP_AND, nv10+: little endian */ 334 ACCW(PR_CTX2_0, 0x00000000); /* DMA0 and DMA1 instance invalid */ 335 ACCW(PR_CTX3_0, 0x00000000); /* method traps disabled */ 336 /* setup set '1' for cmd NV_IMAGE_BLACK_RECTANGLE */ 337 ACCW(PR_CTX0_1, 0x01008019); /* NVclass $019, patchcfg ROP_AND, nv10+: little endian */ 338 ACCW(PR_CTX2_1, 0x00000000); /* DMA0 and DMA1 instance invalid */ 339 ACCW(PR_CTX3_1, 0x00000000); /* method traps disabled */ 340 /* setup set '2' for cmd NV_IMAGE_PATTERN */ 341 ACCW(PR_CTX0_2, 0x01008018); /* NVclass $018, patchcfg ROP_AND, nv10+: little endian */ 342 ACCW(PR_CTX2_2, 0x00000000); /* DMA0 and DMA1 instance invalid */ 343 ACCW(PR_CTX3_2, 0x00000000); /* method traps disabled */ 344//fixme: update 3D add-on and this code for the NV4_SURFACE command. 345 /* setup set '3' for ... */ 346 if(si->ps.card_arch >= NV10A) 347 { 348 /* ... cmd NV10_CONTEXT_SURFACES_2D */ 349 ACCW(PR_CTX0_3, 0x01008062); /* NVclass $062, nv10+: little endian */ 350 } 351 else 352 { 353 /* ... cmd NV4_SURFACE */ 354 ACCW(PR_CTX0_3, 0x01008042); /* NVclass $042, nv10+: little endian */ 355 } 356 ACCW(PR_CTX1_3, 0x00000000); /* colorspace not set, notify instance invalid (b16-31) */ 357 ACCW(PR_CTX2_3, 0x11401140); /* DMA0 instance is $1140, DMA1 instance invalid */ 358 ACCW(PR_CTX3_3, 0x00000000); /* method trap 0 is $1140, trap 1 disabled */ 359 /* setup set '4' for cmd NV_IMAGE_BLIT */ 360 ACCW(PR_CTX0_4, 0x0100805f); /* NVclass $05f, patchcfg ROP_AND, nv10+: little endian */ 361 ACCW(PR_CTX2_4, 0x00000000); /* DMA0 and DMA1 instance invalid */ 362 ACCW(PR_CTX3_4, 0x00000000); /* method traps disabled */ 363 /* setup set '5' for cmd NV4_GDI_RECTANGLE_TEXT */ 364 ACCW(PR_CTX0_5, 0x0100804a); /* NVclass $04a, patchcfg ROP_AND, nv10+: little endian */ 365 ACCW(PR_CTX2_5, 0x00000000); /* DMA0 and DMA1 instance invalid */ 366 ACCW(PR_CTX3_5, 0x00000000); /* method traps disabled */ 367 /* setup set '6' ... */ 368 if (si->ps.card_arch != NV04A) 369 { 370 /* ... for cmd NV10_CONTEXT_SURFACES_ARGB_ZS */ 371 ACCW(PR_CTX0_6, 0x00000093); /* NVclass $093, nv10+: little endian */ 372 } 373 else 374 { 375 /* ... for cmd NV4_CONTEXT_SURFACES_ARGB_ZS */ 376 ACCW(PR_CTX0_6, 0x00000053); /* NVclass $053, nv10+: little endian */ 377 } 378 ACCW(PR_CTX2_6, 0x11401140); /* DMA0, DMA1 instance = $1140 */ 379 ACCW(PR_CTX3_6, 0x00000000); /* method traps disabled */ 380 /* setup set '7' ... */ 381 if (si->ps.card_arch != NV04A) 382 { 383 /* ... for cmd NV10_DX5_TEXTURE_TRIANGLE */ 384 ACCW(PR_CTX0_7, 0x0300a094); /* NVclass $094, patchcfg ROP_AND, userclip enable, 385 * context surface0 valid, nv10+: little endian */ 386 } 387 else 388 { 389 /* ... for cmd NV4_DX5_TEXTURE_TRIANGLE */ 390 ACCW(PR_CTX0_7, 0x0300a054); /* NVclass $054, patchcfg ROP_AND, userclip enable, 391 * context surface0 valid */ 392 } 393 ACCW(PR_CTX1_7, 0x00000d01); /* format is A8RGB24, MSB mono */ 394 ACCW(PR_CTX2_7, 0x11401140); /* DMA0, DMA1 instance = $1140 */ 395 ACCW(PR_CTX3_7, 0x00000000); /* method traps disabled */ 396 /* setup set '8' ... */ 397 if (si->ps.card_arch != NV04A) 398 { 399 /* ... for cmd NV10_DX6_MULTI_TEXTURE_TRIANGLE (not used) */ 400 ACCW(PR_CTX0_8, 0x0300a095); /* NVclass $095, patchcfg ROP_AND, userclip enable, 401 * context surface0 valid, nv10+: little endian */ 402 } 403 else 404 { 405 /* ... for cmd NV4_DX6_MULTI_TEXTURE_TRIANGLE (not used) */ 406 ACCW(PR_CTX0_8, 0x0300a055); /* NVclass $055, patchcfg ROP_AND, userclip enable, 407 * context surface0 valid */ 408 } 409 ACCW(PR_CTX1_8, 0x00000d01); /* format is A8RGB24, MSB mono */ 410 ACCW(PR_CTX2_8, 0x11401140); /* DMA0, DMA1 instance = $1140 */ 411 ACCW(PR_CTX3_8, 0x00000000); /* method traps disabled */ 412 /* setup set '9' for cmd NV1_RENDER_SOLID_LIN (not used) */ 413 ACCW(PR_CTX0_9, 0x0300a01c); /* NVclass $01c, patchcfg ROP_AND, userclip enable, 414 * context surface0 valid, nv10+: little endian */ 415 ACCW(PR_CTX2_9, 0x11401140); /* DMA0, DMA1 instance = $1140 */ 416 ACCW(PR_CTX3_9, 0x00000000); /* method traps disabled */ 417//fixme: update 3D add-on and this code for the NV4_SURFACE command. 418 /* setup set '9' for cmd NV3_SURFACE_0 */ 419// ACCW(PR_CTX0_9, 0x00000058); /* NVclass $058, nv10+: little endian */ 420// ACCW(PR_CTX2_9, 0x11401140); /* DMA0, DMA1 instance = $1140 */ 421// ACCW(PR_CTX3_9, 0x00000000); /* method traps disabled */ 422 /* setup set 'A' for cmd NV3_SURFACE_1 */ 423// ACCW(PR_CTX0_A, 0x00000059); /* NVclass $059, nv10+: little endian */ 424// ACCW(PR_CTX2_A, 0x11401140); /* DMA0, DMA1 instance = $1140 */ 425// ACCW(PR_CTX3_A, 0x00000000); /* method traps disabled */ 426 } 427 428 /*** PGRAPH ***/ 429 switch (si->ps.card_arch) 430 { 431 case NV40A: 432 /* set resetstate for most function blocks */ 433 ACCW(DEBUG0, 0x0003ffff);//? 434 /* init some function blocks */ 435 ACCW(DEBUG1, 0x401287c0); 436 ACCW(DEBUG2, 0x24f82ad9);//? 437 ACCW(DEBUG3, 0x60de8051); 438 /* end resetstate for the function blocks */ 439 ACCW(DEBUG0, 0x00000000);//? 440 /* disable specific functions, but enable SETUP_SPARE2 register */ 441 ACCW(NV10_DEBUG4, 0x00008000); 442 /* set limit_viol_pix_adress(?): more likely something unknown.. */ 443 ACCW(NV25_WHAT0, 0x00be3c5f); 444 /* unknown.. */ 445 switch (si->ps.card_type) 446 { 447 case NV40: 448 case NV45: 449 ACCW(NV40_WHAT0, 0x83280fff); 450 ACCW(NV40_WHAT1, 0x000000a0); 451 ACCW(NV40_WHAT2, 0x0078e366); 452 ACCW(NV40_WHAT3, 0x0000014c); 453 break; 454 case NV41: 455 ACCW(NV40P_WHAT0, 0x83280eff); 456 ACCW(NV40P_WHAT1, 0x000000a0); 457 ACCW(NV40P_WHAT2, 0x007596ff); 458 ACCW(NV40P_WHAT3, 0x00000108); 459 break; 460 case NV43: 461 ACCW(NV40P_WHAT0, 0x83280eff); 462 ACCW(NV40P_WHAT1, 0x000000a0); 463 ACCW(NV40P_WHAT2, 0x0072cb77); 464 ACCW(NV40P_WHAT3, 0x00000108); 465 break; 466 case NV44: 467 ACCW(NV40P_WHAT0, 0x83280eff); 468 ACCW(NV40P_WHAT1, 0x000000a0); 469 ACCW(NV44_WHAT2, 0x00000000); 470 ACCW(NV44_WHAT3, 0x00000000); 471 /* unknown.. */ 472 NV_REG32(NV32_NV44_WHAT10) = NV_REG32(NV32_NV10STRAPINFO); 473 NV_REG32(NV32_NV44_WHAT11) = 0x00000000; 474 NV_REG32(NV32_NV44_WHAT12) = 0x00000000; 475 NV_REG32(NV32_NV44_WHAT13) = NV_REG32(NV32_NV10STRAPINFO); 476 break; 477 default: 478 ACCW(NV40P_WHAT0, 0x83280eff); 479 ACCW(NV40P_WHAT1, 0x000000a0); 480 break; 481 } 482 break; 483 case NV04A: 484 /* init some function blocks */ 485 ACCW(DEBUG0, 0x1231c001); 486 ACCW(DEBUG1, 0x72111101); 487 ACCW(DEBUG2, 0x11d5f071); 488 ACCW(DEBUG3, 0x10d4ff31); 489 break; 490 default: 491 /* set resetstate for most function blocks */ 492 ACCW(DEBUG0, 0x0003ffff); 493 /* init some function blocks */ 494 ACCW(DEBUG1, 0x00118701); 495 ACCW(DEBUG2, 0x24f82ad9); 496 ACCW(DEBUG3, 0x55de0030); 497 /* end resetstate for the function blocks */ 498 ACCW(DEBUG0, 0x00000000); 499 /* disable specific functions */ 500 ACCW(NV10_DEBUG4, 0); 501 break; 502 } 503 504 /* reset all cache sets */ 505 ACCW(CACHE1_1, 0); 506 ACCW(CACHE1_2, 0); 507 ACCW(CACHE1_3, 0); 508 ACCW(CACHE1_4, 0); 509 ACCW(CACHE1_5, 0); 510 ACCW(CACHE2_1, 0); 511 ACCW(CACHE2_2, 0); 512 ACCW(CACHE2_3, 0); 513 ACCW(CACHE2_4, 0); 514 ACCW(CACHE2_5, 0); 515 ACCW(CACHE3_1, 0); 516 ACCW(CACHE3_2, 0); 517 ACCW(CACHE3_3, 0); 518 ACCW(CACHE3_4, 0); 519 ACCW(CACHE3_5, 0); 520 ACCW(CACHE4_1, 0); 521 ACCW(CACHE4_2, 0); 522 ACCW(CACHE4_3, 0); 523 ACCW(CACHE4_4, 0); 524 ACCW(CACHE4_5, 0); 525 if (si->ps.card_arch != NV04A) 526 ACCW(NV10_CACHE5_1, 0); 527 ACCW(CACHE5_2, 0); 528 ACCW(CACHE5_3, 0); 529 ACCW(CACHE5_4, 0); 530 ACCW(CACHE5_5, 0); 531 if (si->ps.card_arch != NV04A) 532 ACCW(NV10_CACHE6_1, 0); 533 ACCW(CACHE6_2, 0); 534 ACCW(CACHE6_3, 0); 535 ACCW(CACHE6_4, 0); 536 ACCW(CACHE6_5, 0); 537 if (si->ps.card_arch != NV04A) 538 ACCW(NV10_CACHE7_1, 0); 539 ACCW(CACHE7_2, 0); 540 ACCW(CACHE7_3, 0); 541 ACCW(CACHE7_4, 0); 542 ACCW(CACHE7_5, 0); 543 if (si->ps.card_arch != NV04A) 544 ACCW(NV10_CACHE8_1, 0); 545 ACCW(CACHE8_2, 0); 546 ACCW(CACHE8_3, 0); 547 ACCW(CACHE8_4, 0); 548 ACCW(CACHE8_5, 0); 549 550 if (si->ps.card_arch != NV04A) 551 { 552 /* reset (disable) context switch stuff */ 553 ACCW(NV10_CTX_SW1, 0); 554 ACCW(NV10_CTX_SW2, 0); 555 ACCW(NV10_CTX_SW3, 0); 556 ACCW(NV10_CTX_SW4, 0); 557 ACCW(NV10_CTX_SW5, 0); 558 } 559 560 /* setup accesible card memory range for acc engine */ 561 ACCW(BBASE0, 0x00000000); 562 ACCW(BBASE1, 0x00000000); 563 ACCW(BBASE2, 0x00000000); 564 ACCW(BBASE3, 0x00000000); 565 ACCW(BLIMIT0, (si->ps.memory_size - 1)); 566 ACCW(BLIMIT1, (si->ps.memory_size - 1)); 567 ACCW(BLIMIT2, (si->ps.memory_size - 1)); 568 ACCW(BLIMIT3, (si->ps.memory_size - 1)); 569 if (si->ps.card_arch >= NV10A) 570 { 571 ACCW(NV10_BBASE4, 0x00000000); 572 ACCW(NV10_BBASE5, 0x00000000); 573 ACCW(NV10_BLIMIT4, (si->ps.memory_size - 1)); 574 ACCW(NV10_BLIMIT5, (si->ps.memory_size - 1)); 575 } 576 if (si->ps.card_arch >= NV20A) 577 { 578 if ((si->ps.card_type > NV40) && (si->ps.card_type != NV45)) 579 { 580 ACCW(NV40P_BLIMIT6, (si->ps.memory_size - 1)); 581 ACCW(NV40P_BLIMIT7, (si->ps.memory_size - 1)); 582 } 583 else 584 { 585 /* fixme(?): assuming more BLIMIT registers here: Then how about BBASE6-9? */ 586 ACCW(NV20_BLIMIT6, (si->ps.memory_size - 1)); 587 ACCW(NV20_BLIMIT7, (si->ps.memory_size - 1)); 588 if (si->ps.card_type < NV40) 589 { 590 ACCW(NV20_BLIMIT8, (si->ps.memory_size - 1)); 591 ACCW(NV20_BLIMIT9, (si->ps.memory_size - 1)); 592 } 593 } 594 } 595 596 /* disable all acceleration engine INT reguests */ 597 ACCW(ACC_INTE, 0x00000000); 598 599 /* reset all acceration engine INT status bits */ 600 ACCW(ACC_INTS, 0xffffffff); 601 if (si->ps.card_arch != NV04A) 602 { 603 /* context control enabled */ 604 ACCW(NV10_CTX_CTRL, 0x10010100); 605 /* all acceleration buffers, pitches and colors are valid */ 606 ACCW(NV10_ACC_STAT, 0xffffffff); 607 } 608 else 609 { 610 /* context control enabled */ 611 ACCW(NV04_CTX_CTRL, 0x10010100); 612 /* all acceleration buffers, pitches and colors are valid */ 613 ACCW(NV04_ACC_STAT, 0xffffffff); 614 } 615 /* enable acceleration engine command FIFO */ 616 ACCW(FIFO_EN, 0x00000001); 617 /* pattern shape value = 8x8, 2 color */ 618 ACCW(PAT_SHP, 0x00000000); 619 if (si->ps.card_arch != NV04A) 620 { 621 /* surface type is non-swizzle */ 622 ACCW(NV10_SURF_TYP, 0x00000001); 623 } 624 else 625 { 626 /* surface type is non-swizzle */ 627 ACCW(NV04_SURF_TYP, 0x00000001); 628 } 629 630 /*** Set pixel width and format ***/ 631 //info: 632 //the BPIXEL register holds the colorspaces for different engine 'contexts' or so. 633 //B0-3 is 'channel' 0, b4-7 is 'channel '1', etc. 634 //It looks like we are only using channel 0, so the settings for other channels 635 //shouldn't matter yet. 636 //When for instance rect_fill is going to be used on other buffers than the actual 637 //screen, it's colorspace should be corrected. When the engine is setup in 32bit 638 //desktop mode for example, the pixel's alpha channel doesn't get touched currently. 639 //choose mode $d (which is Y32) to get alpha filled too. 640 switch(si->dm.space) 641 { 642 case B_CMAP8: 643 /* acc engine */ 644 ACCW(FORMATS, 0x00001010); 645 if (si->ps.card_arch < NV30A) 646 /* set depth 0-5: $1 = Y8 */ 647 ACCW(BPIXEL, 0x00111111); 648 else 649 /* set depth 0-1: $1 = Y8, $2 = X1R5G5B5_Z1R5G5B5 */ 650 ACCW(BPIXEL, 0x00000021); 651 ACCW(STRD_FMT, 0x03020202); 652 /* PRAMIN */ 653 if (si->ps.card_arch < NV40A) 654 { 655 ACCW(PR_CTX1_0, 0x00000302); /* format is X24Y8, LSB mono */ 656 ACCW(PR_CTX1_1, 0x00000302); /* format is X24Y8, LSB mono */ 657 ACCW(PR_CTX1_2, 0x00000202); /* format is X16A8Y8, LSB mono */ 658 ACCW(PR_CTX1_3, 0x00000302); /* format is X24Y8, LSB mono */ 659 ACCW(PR_CTX1_4, 0x00000302); /* format is X24Y8, LSB mono */ 660 ACCW(PR_CTX1_5, 0x00000302); /* format is X24Y8, LSB mono */ 661 if (si->ps.card_arch == NV04A) 662 { 663 ACCW(PR_CTX1_6, 0x00000302); /* format is X24Y8, LSB mono */ 664 } 665 else 666 { 667 ACCW(PR_CTX1_6, 0x00000000); /* format is invalid */ 668 } 669 ACCW(PR_CTX1_9, 0x00000302); /* format is X24Y8, LSB mono */ 670//fixme: update 3D add-on and this code for the NV4_SURFACE command. 671//old surf0 and 1: 672// ACCW(PR_CTX1_9, 0x00000302); /* format is X24Y8, LSB mono */ 673// ACCW(PR_CTX2_9, 0x00000302); /* dma_instance 0 valid, instance 1 invalid */ 674 } 675 else 676 { 677 //fixme: select colorspace here (and in other depths), or add 678 //the appropriate SURFACE command(s). 679 ACCW(PR_CTX1_0, 0x00000000); /* NV_ROP5_SOLID */ 680 ACCW(PR_CTX1_2, 0x00000000); /* NV_IMAGE_BLACK_RECTANGLE */ 681 ACCW(PR_CTX1_4, 0x02000000); /* NV_IMAGE_PATTERN */ 682 ACCW(PR_CTX1_6, 0x00000000); /* NV_IMAGE_BLIT */ 683 ACCW(PR_CTX1_8, 0x02000000); /* NV4_GDI_RECTANGLE_TEXT */ 684 ACCW(PR_CTX1_A, 0x02000000); /* NV10_CONTEXT_SURFACES_2D */ 685 } 686 break; 687 case B_RGB15_LITTLE: 688 /* acc engine */ 689 ACCW(FORMATS, 0x00002071); 690 if (si->ps.card_arch < NV30A) 691 /* set depth 0-5: $2 = X1R5G5B5_Z1R5G5B5, $6 = Y16 */ 692 ACCW(BPIXEL, 0x00226222); 693 else 694 /* set depth 0-1: $2 = X1R5G5B5_Z1R5G5B5, $4 = A1R5G5B5 */ 695 ACCW(BPIXEL, 0x00000042); 696 ACCW(STRD_FMT, 0x09080808); 697 /* PRAMIN */ 698 ACCW(PR_CTX1_0, 0x00000902); /* format is X17RGB15, LSB mono */ 699 ACCW(PR_CTX1_1, 0x00000902); /* format is X17RGB15, LSB mono */ 700 ACCW(PR_CTX1_2, 0x00000802); /* format is X16A1RGB15, LSB mono */ 701 ACCW(PR_CTX1_3, 0x00000902); /* format is X17RGB15, LSB mono */ 702 ACCW(PR_CTX1_4, 0x00000902); /* format is X17RGB15, LSB mono */ 703 ACCW(PR_CTX1_5, 0x00000902); /* format is X17RGB15, LSB mono */ 704 ACCW(PR_CTX1_6, 0x00000902); /* format is X17RGB15, LSB mono */ 705 ACCW(PR_CTX1_9, 0x00000902); /* format is X17RGB15, LSB mono */ 706//old surf0 and 1: 707// ACCW(PR_CTX1_9, 0x00000902); /* format is X17RGB15, LSB mono */ 708// ACCW(PR_CTX2_9, 0x00000902); /* dma_instance 0 valid, instance 1 invalid */ 709 break; 710 case B_RGB16_LITTLE: 711 /* acc engine */ 712 ACCW(FORMATS, 0x000050C2); 713 if (si->ps.card_arch < NV30A) 714 /* set depth 0-5: $5 = R5G6B5, $6 = Y16 */ 715 ACCW(BPIXEL, 0x00556555); 716 else 717 /* set depth 0-1: $5 = R5G6B5, $a = X1A7R8G8B8_O1A7R8G8B8 */ 718 ACCW(BPIXEL, 0x000000a5); 719 if (si->ps.card_arch == NV04A) 720 ACCW(STRD_FMT, 0x0c0b0b0b); 721 else 722 ACCW(STRD_FMT, 0x000b0b0c); 723 /* PRAMIN */ 724 ACCW(PR_CTX1_0, 0x00000c02); /* format is X16RGB16, LSB mono */ 725 ACCW(PR_CTX1_1, 0x00000c02); /* format is X16RGB16, LSB mono */ 726 ACCW(PR_CTX1_2, 0x00000b02); /* format is A16RGB16, LSB mono */ 727 ACCW(PR_CTX1_3, 0x00000c02); /* format is X16RGB16, LSB mono */ 728 ACCW(PR_CTX1_4, 0x00000c02); /* format is X16RGB16, LSB mono */ 729 ACCW(PR_CTX1_5, 0x00000c02); /* format is X16RGB16, LSB mono */ 730 ACCW(PR_CTX1_6, 0x00000c02); /* format is X16RGB16, LSB mono */ 731 ACCW(PR_CTX1_9, 0x00000c02); /* format is X16RGB16, LSB mono */ 732//old surf0 and 1: 733// ACCW(PR_CTX1_9, 0x00000c02); /* format is X16RGB16, LSB mono */ 734// ACCW(PR_CTX2_9, 0x00000c02); /* dma_instance 0 valid, instance 1 invalid */ 735 break; 736 case B_RGB32_LITTLE: 737 case B_RGBA32_LITTLE: 738 /* acc engine */ 739 ACCW(FORMATS, 0x000070e5); 740 if (si->ps.card_arch < NV30A) 741 /* set depth 0-5: $7 = X8R8G8B8_Z8R8G8B8, $d = Y32 */ 742 ACCW(BPIXEL, 0x0077d777); 743 else 744 /* set depth 0-1: $7 = X8R8G8B8_Z8R8G8B8, $e = V8YB8U8YA8 */ 745 ACCW(BPIXEL, 0x000000e7); 746 ACCW(STRD_FMT, 0x0e0d0d0d); 747 /* PRAMIN */ 748 ACCW(PR_CTX1_0, 0x00000e02); /* format is X8RGB24, LSB mono */ 749 ACCW(PR_CTX1_1, 0x00000e02); /* format is X8RGB24, LSB mono */ 750 ACCW(PR_CTX1_2, 0x00000d02); /* format is A8RGB24, LSB mono */ 751 ACCW(PR_CTX1_3, 0x00000e02); /* format is X8RGB24, LSB mono */ 752 ACCW(PR_CTX1_4, 0x00000e02); /* format is X8RGB24, LSB mono */ 753 ACCW(PR_CTX1_5, 0x00000e02); /* format is X8RGB24, LSB mono */ 754 ACCW(PR_CTX1_6, 0x00000e02); /* format is X8RGB24, LSB mono */ 755 ACCW(PR_CTX1_9, 0x00000e02); /* format is X8RGB24, LSB mono */ 756//old surf0 and 1: 757// ACCW(PR_CTX1_9, 0x00000e02); /* format is X8RGB24, LSB mono */ 758// ACCW(PR_CTX2_9, 0x00000e02); /* dma_instance 0 valid, instance 1 invalid */ 759 break; 760 default: 761 LOG(8,("ACC: init, invalid bit depth\n")); 762 return B_ERROR; 763 } 764 765 /* setup some extra stuff for NV30A and later */ 766 if (si->ps.card_arch >= NV30A) 767 { 768 /* activate Zcullflush(?) */ 769 ACCW(DEBUG3, (ACCR(DEBUG3) | 0x00000001)); 770 /* unknown */ 771 ACCW(NV25_WHAT1, (ACCR(NV25_WHAT1) | 0x00040000)); 772 } 773 774 /*** setup screen location and pitch ***/ 775 switch (si->ps.card_arch) 776 { 777 case NV04A: 778 case NV10A: 779 /* location of active screen in framebuffer */ 780 /* (confirmed NV05: OFFSET0 is 2D destination buffer offset) */ 781 ACCW(OFFSET0, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 782 /* (confirmed NV05: OFFSET1 is 2D source buffer offset) */ 783 ACCW(OFFSET1, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 784 /* (confirmed NV05: OFFSET2 is 3D color buffer offset) */ 785 ACCW(OFFSET2, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 786 /* (confirmed NV05: OFFSET3 is 3D depth buffer offset) */ 787 ACCW(OFFSET3, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 788 ACCW(OFFSET4, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 789 ACCW(OFFSET5, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 790 791 /* setup buffer pitch */ 792 /* (confirmed NV05: PITCH0 is 2D destination buffer pitch) */ 793 ACCW(PITCH0, (si->fbc.bytes_per_row & 0x0000ffff)); 794 /* (confirmed NV05: PITCH1 is 2D source buffer pitch) */ 795 ACCW(PITCH1, (si->fbc.bytes_per_row & 0x0000ffff)); 796 /* (confirmed NV05: PITCH2 is 3D color buffer pitch) */ 797 ACCW(PITCH2, (si->fbc.bytes_per_row & 0x0000ffff)); 798 /* (confirmed NV05: PITCH3 is 3D depth buffer pitch) */ 799 ACCW(PITCH3, (si->fbc.bytes_per_row & 0x0000ffff)); 800 ACCW(PITCH4, (si->fbc.bytes_per_row & 0x0000ffff)); 801 break; 802 case NV20A: 803 case NV30A: 804 /* location of active screen in framebuffer */ 805 ACCW(NV20_OFFSET0, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 806 ACCW(NV20_OFFSET1, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 807 ACCW(NV20_OFFSET2, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 808 ACCW(NV20_OFFSET3, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 809 810 /* setup buffer pitch */ 811 ACCW(NV20_PITCH0, (si->fbc.bytes_per_row & 0x0000ffff)); 812 ACCW(NV20_PITCH1, (si->fbc.bytes_per_row & 0x0000ffff)); 813 ACCW(NV20_PITCH2, (si->fbc.bytes_per_row & 0x0000ffff)); 814 ACCW(NV20_PITCH3, (si->fbc.bytes_per_row & 0x0000ffff)); 815 break; 816 case NV40A: 817 if ((si->ps.card_type == NV40) || (si->ps.card_type == NV45)) 818 { 819 /* location of active screen in framebuffer */ 820 ACCW(NV20_OFFSET0, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 821 ACCW(NV20_OFFSET1, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 822 //ACCW(NV20_OFFSET2, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 823 //ACCW(NV20_OFFSET3, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 824 825 /* setup buffer pitch */ 826 //fixme? 827 ACCW(NV20_PITCH0, (si->fbc.bytes_per_row & 0x0000ffff)); 828 ACCW(NV20_PITCH1, (si->fbc.bytes_per_row & 0x0000ffff)); 829 ACCW(NV20_PITCH2, (si->fbc.bytes_per_row & 0x0000ffff)); 830 ACCW(NV20_PITCH3, (si->fbc.bytes_per_row & 0x0000ffff)); 831 } 832 else 833 { 834 /* location of active screen in framebuffer */ 835 ACCW(NV40P_OFFSET0, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 836 ACCW(NV40P_OFFSET1, ((uint8*)si->fbc.frame_buffer - (uint8*)si->framebuffer)); 837 838 /* setup buffer pitch */ 839 //fixme? 840 ACCW(NV40P_PITCH0, (si->fbc.bytes_per_row & 0x0000ffff)); 841 ACCW(NV40P_PITCH1, (si->fbc.bytes_per_row & 0x0000ffff)); 842 } 843 break; 844 } 845 846 /*** setup tile and pipe stuff ***/ 847 if (si->ps.card_arch >= NV10A) 848 { 849 /* setup acc engine tile stuff: */ 850 /* reset tile adresses */ 851 ACCW(NV10_FBTIL0AD, 0); 852 ACCW(NV10_FBTIL1AD, 0); 853 ACCW(NV10_FBTIL2AD, 0); 854 ACCW(NV10_FBTIL3AD, 0); 855 ACCW(NV10_FBTIL4AD, 0); 856 ACCW(NV10_FBTIL5AD, 0); 857 ACCW(NV10_FBTIL6AD, 0); 858 ACCW(NV10_FBTIL7AD, 0); 859 /* copy some RAM configuration info(?) */ 860 if (si->ps.card_arch >= NV20A) 861 { 862 if ((si->ps.card_type > NV40) && (si->ps.card_type != NV45)) 863 { 864 ACCW(NV40P_WHAT_T0, NV_REG32(NV32_PFB_CONFIG_0)); 865 ACCW(NV40P_WHAT_T1, NV_REG32(NV32_PFB_CONFIG_1)); 866 ACCW(NV40P_WHAT_T2, NV_REG32(NV32_PFB_CONFIG_0)); 867 ACCW(NV40P_WHAT_T3, NV_REG32(NV32_PFB_CONFIG_1)); 868 } 869 else 870 { 871 ACCW(NV20_WHAT_T0, NV_REG32(NV32_PFB_CONFIG_0)); 872 ACCW(NV20_WHAT_T1, NV_REG32(NV32_PFB_CONFIG_1)); 873 if ((si->ps.card_type == NV40) || (si->ps.card_type == NV45)) 874 { 875 ACCW(NV40_WHAT_T2, NV_REG32(NV32_PFB_CONFIG_0)); 876 ACCW(NV40_WHAT_T3, NV_REG32(NV32_PFB_CONFIG_1)); 877 } 878 } 879 } 880 /* copy tile setup stuff from 'source' to acc engine */ 881 /* tile 0: */ 882 /* tile invalid, tile adress = $00000 (18bit) */ 883 ACCW(NV10_TIL0AD, ACCR(NV10_FBTIL0AD)); 884 /* set tile end adress (18bit) */ 885 ACCW(NV10_TIL0ED, ACCR(NV10_FBTIL0ED)); 886 /* set tile size pitch (8bit: b8-15) */ 887 ACCW(NV10_TIL0PT, ACCR(NV10_FBTIL0PT)); 888 /* set tile status */ 889 ACCW(NV10_TIL0ST, ACCR(NV10_FBTIL0ST)); 890 /* tile 1: */ 891 ACCW(NV10_TIL1AD, ACCR(NV10_FBTIL1AD)); 892 ACCW(NV10_TIL1ED, ACCR(NV10_FBTIL1ED)); 893 ACCW(NV10_TIL1PT, ACCR(NV10_FBTIL1PT)); 894 ACCW(NV10_TIL1ST, ACCR(NV10_FBTIL1ST)); 895 /* tile 2: */ 896 ACCW(NV10_TIL2AD, ACCR(NV10_FBTIL2AD)); 897 ACCW(NV10_TIL2ED, ACCR(NV10_FBTIL2ED)); 898 ACCW(NV10_TIL2PT, ACCR(NV10_FBTIL2PT)); 899 ACCW(NV10_TIL2ST, ACCR(NV10_FBTIL2ST)); 900 /* tile 3: */ 901 ACCW(NV10_TIL3AD, ACCR(NV10_FBTIL3AD)); 902 ACCW(NV10_TIL3ED, ACCR(NV10_FBTIL3ED)); 903 if (si->ps.card_arch >= NV40A) 904 { 905 ACCW(NV10_TIL3PT, 0x2ffff800); 906 ACCW(NV10_TIL3ST, 0x00006000); 907 } 908 else 909 { 910 ACCW(NV10_TIL3PT, ACCR(NV10_FBTIL3PT)); 911 ACCW(NV10_TIL3ST, ACCR(NV10_FBTIL3ST)); 912 } 913 /* tile 4: */ 914 ACCW(NV10_TIL4AD, ACCR(NV10_FBTIL4AD)); 915 ACCW(NV10_TIL4ED, ACCR(NV10_FBTIL4ED)); 916 ACCW(NV10_TIL4PT, ACCR(NV10_FBTIL4PT)); 917 ACCW(NV10_TIL4ST, ACCR(NV10_FBTIL4ST)); 918 /* tile 5: */ 919 ACCW(NV10_TIL5AD, ACCR(NV10_FBTIL5AD)); 920 ACCW(NV10_TIL5ED, ACCR(NV10_FBTIL5ED)); 921 ACCW(NV10_TIL5PT, ACCR(NV10_FBTIL5PT)); 922 ACCW(NV10_TIL5ST, ACCR(NV10_FBTIL5ST)); 923 /* tile 6: */ 924 ACCW(NV10_TIL6AD, ACCR(NV10_FBTIL6AD)); 925 ACCW(NV10_TIL6ED, ACCR(NV10_FBTIL6ED)); 926 ACCW(NV10_TIL6PT, ACCR(NV10_FBTIL6PT)); 927 ACCW(NV10_TIL6ST, ACCR(NV10_FBTIL6ST)); 928 /* tile 7: */ 929 ACCW(NV10_TIL7AD, ACCR(NV10_FBTIL7AD)); 930 ACCW(NV10_TIL7ED, ACCR(NV10_FBTIL7ED)); 931 ACCW(NV10_TIL7PT, ACCR(NV10_FBTIL7PT)); 932 ACCW(NV10_TIL7ST, ACCR(NV10_FBTIL7ST)); 933 934 if (si->ps.card_arch >= NV40A) 935 { 936 /* unknown.. */ 937 ACCW(NV4X_WHAT1, 0x01000000); 938 /* engine data source DMA instance is invalid */ 939 ACCW(NV4X_DMA_SRC, 0x00000000); 940 } 941 942 /* setup (clear) pipe */ 943 /* set eyetype to local, lightning is off */ 944 ACCW(NV10_XFMOD0, 0x10000000); 945 /* disable all lights */ 946 ACCW(NV10_XFMOD1, 0x00000000); 947 948 ACCW(NV10_PIPEADR, 0x00000040); 949 ACCW(NV10_PIPEDAT, 0x00000008); 950 951 /* note: upon writing data into the PIPEDAT register, the PIPEADR is 952 * probably auto-incremented! */ 953 ACCW(NV10_PIPEADR, 0x00000200); 954 for (cnt = 0; cnt < (3 * 16); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 955 956 ACCW(NV10_PIPEADR, 0x00000040); 957 ACCW(NV10_PIPEDAT, 0x00000000); 958 959 //fixme: this 'set' seems to hang the NV43 engine if executed: 960 //status remains 'busy' forever in this case. 961 if (si->ps.card_arch < NV40A) 962 { 963 ACCW(NV10_PIPEADR, 0x00000800); 964 for (cnt = 0; cnt < (16 * 16); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 965 } 966 967 /* turn lightning on */ 968 ACCW(NV10_XFMOD0, 0x30000000); 969 /* set light 1 to infinite type, other lights remain off */ 970 ACCW(NV10_XFMOD1, 0x00000004); 971 972 ACCW(NV10_PIPEADR, 0x00006400); 973 for (cnt = 0; cnt < (59 * 4); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 974 975 ACCW(NV10_PIPEADR, 0x00006800); 976 for (cnt = 0; cnt < (47 * 4); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 977 978 ACCW(NV10_PIPEADR, 0x00006c00); 979 for (cnt = 0; cnt < (3 * 4); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 980 981 ACCW(NV10_PIPEADR, 0x00007000); 982 for (cnt = 0; cnt < (19 * 4); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 983 984 ACCW(NV10_PIPEADR, 0x00007400); 985 for (cnt = 0; cnt < (12 * 4); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 986 987 ACCW(NV10_PIPEADR, 0x00007800); 988 for (cnt = 0; cnt < (12 * 4); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 989 990 ACCW(NV10_PIPEADR, 0x00004400); 991 for (cnt = 0; cnt < (8 * 4); cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 992 993 ACCW(NV10_PIPEADR, 0x00000000); 994 for (cnt = 0; cnt < 16; cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 995 996 ACCW(NV10_PIPEADR, 0x00000040); 997 for (cnt = 0; cnt < 4; cnt++) ACCW(NV10_PIPEDAT, 0x00000000); 998 } 999 1000 /* setup 3D specifics */ 1001 nv_init_for_3D(); 1002 1003 /*** setup acceleration engine command shortcuts (so via fifo) ***/ 1004 /* set object handles (b31 = 1 selects 'config' function?) */ 1005 /* note: 1006 * probably depending on some other setup, there are 8 or 32 FIFO channels 1007 * available. Assuming the current setup only has 8 channels because the 'rest' 1008 * isn't setup here... */ 1009 si->engine.fifo.handle[0] = NV_ROP5_SOLID; 1010 si->engine.fifo.handle[1] = NV_IMAGE_BLACK_RECTANGLE; 1011 si->engine.fifo.handle[2] = NV_IMAGE_PATTERN; 1012 si->engine.fifo.handle[3] = NV4_SURFACE; /* NV10_CONTEXT_SURFACES_2D is identical */ 1013 si->engine.fifo.handle[4] = NV_IMAGE_BLIT; 1014 si->engine.fifo.handle[5] = NV4_GDI_RECTANGLE_TEXT; 1015 if (si->ps.card_arch < NV40A) 1016 { 1017 si->engine.fifo.handle[6] = NV1_RENDER_SOLID_LIN; 1018 si->engine.fifo.handle[7] = NV4_DX5_TEXTURE_TRIANGLE; 1019 } 1020 /* preset no FIFO channels assigned to cmd's */ 1021 for (cnt = 0; cnt < 0x20; cnt++) 1022 { 1023 si->engine.fifo.ch_ptr[cnt] = 0; 1024 } 1025 /* set handle's pointers to their assigned FIFO channels */ 1026 for (cnt = 0; cnt < 0x08; cnt++) 1027 { 1028 si->engine.fifo.ch_ptr[(si->engine.fifo.handle[cnt])] = 1029 (NVACC_FIFO + (cnt * 0x00002000)); 1030 } 1031 /* program FIFO assignments */ 1032 ACCW(FIFO_CH0, (0x80000000 | si->engine.fifo.handle[0])); /* Raster OPeration */ 1033 ACCW(FIFO_CH1, (0x80000000 | si->engine.fifo.handle[1])); /* Clip */ 1034 ACCW(FIFO_CH2, (0x80000000 | si->engine.fifo.handle[2])); /* Pattern */ 1035 ACCW(FIFO_CH3, (0x80000000 | si->engine.fifo.handle[3])); /* 2D Surface */ 1036 ACCW(FIFO_CH4, (0x80000000 | si->engine.fifo.handle[4])); /* Blit */ 1037 ACCW(FIFO_CH5, (0x80000000 | si->engine.fifo.handle[5])); /* Bitmap */ 1038 if (si->ps.card_arch < NV40A) 1039 { 1040 ACCW(FIFO_CH6, (0x80000000 | si->engine.fifo.handle[6])); /* Line (not used) */ 1041 ACCW(FIFO_CH7, (0x80000000 | si->engine.fifo.handle[7])); /* Textured Triangle (3D only) */ 1042 } 1043 1044 /* initialize our local pointers */ 1045 nv_acc_assert_fifo(); 1046 1047 /* do first actual acceleration engine command: 1048 * setup clipping region (workspace size) to 32768 x 32768 pixels: 1049 * wait for room in fifo for clipping cmd if needed. 1050 * (fifo holds 256 32bit words: count those, not bytes) */ 1051 while (((nv_image_black_rectangle_ptr->FifoFree) >> 2) < 2) 1052 { 1053 /* snooze a bit so I do not hammer the bus */ 1054 snooze (10); 1055 } 1056 /* now setup clipping (writing 2 32bit words) */ 1057 nv_image_black_rectangle_ptr->TopLeft = 0x00000000; 1058 nv_image_black_rectangle_ptr->HeightWidth = 0x80008000; 1059 1060 return B_OK; 1061} 1062 1063static void nv_init_for_3D(void) 1064{ 1065 /* setup PGRAPH unknown registers and modify (pre-cleared) pipe stuff for 3D use */ 1066 if (si->ps.card_arch >= NV10A) 1067 { 1068 /* setup unknown PGRAPH stuff */ 1069 ACCW(PGWHAT_00, 0x00000000); 1070 ACCW(PGWHAT_01, 0x00000000); 1071 ACCW(PGWHAT_02, 0x00000000); 1072 ACCW(PGWHAT_03, 0x00000000); 1073 1074 ACCW(PGWHAT_04, 0x00001000); 1075 ACCW(PGWHAT_05, 0x00001000); 1076 ACCW(PGWHAT_06, 0x4003ff80); 1077 1078 ACCW(PGWHAT_07, 0x00000000); 1079 ACCW(PGWHAT_08, 0x00000000); 1080 ACCW(PGWHAT_09, 0x00000000); 1081 ACCW(PGWHAT_0A, 0x00000000); 1082 ACCW(PGWHAT_0B, 0x00000000); 1083 1084 ACCW(PGWHAT_0C, 0x00080008); 1085 ACCW(PGWHAT_0D, 0x00080008); 1086 1087 ACCW(PGWHAT_0E, 0x00000000); 1088 ACCW(PGWHAT_0F, 0x00000000); 1089 ACCW(PGWHAT_10, 0x00000000); 1090 ACCW(PGWHAT_11, 0x00000000); 1091 ACCW(PGWHAT_12, 0x00000000); 1092 ACCW(PGWHAT_13, 0x00000000); 1093 ACCW(PGWHAT_14, 0x00000000); 1094 ACCW(PGWHAT_15, 0x00000000); 1095 ACCW(PGWHAT_16, 0x00000000); 1096 ACCW(PGWHAT_17, 0x00000000); 1097 ACCW(PGWHAT_18, 0x00000000); 1098 1099 ACCW(PGWHAT_19, 0x10000000); 1100 1101 ACCW(PGWHAT_1A, 0x00000000); 1102 ACCW(PGWHAT_1B, 0x00000000); 1103 ACCW(PGWHAT_1C, 0x00000000); 1104 ACCW(PGWHAT_1D, 0x00000000); 1105 ACCW(PGWHAT_1E, 0x00000000); 1106 ACCW(PGWHAT_1F, 0x00000000); 1107 ACCW(PGWHAT_20, 0x00000000); 1108 ACCW(PGWHAT_21, 0x00000000); 1109 1110 ACCW(PGWHAT_22, 0x08000000); 1111 1112 ACCW(PGWHAT_23, 0x00000000); 1113 ACCW(PGWHAT_24, 0x00000000); 1114 ACCW(PGWHAT_25, 0x00000000); 1115 ACCW(PGWHAT_26, 0x00000000); 1116 1117 ACCW(PGWHAT_27, 0x4b7fffff); 1118 1119 ACCW(PGWHAT_28, 0x00000000); 1120 ACCW(PGWHAT_29, 0x00000000); 1121 ACCW(PGWHAT_2A, 0x00000000); 1122 1123 /* setup window clipping */ 1124 /* b0-11 = min; b16-27 = max. 1125 * note: 1126 * probably two's complement values, so setting to max range here: 1127 * which would be -2048 upto/including +2047. */ 1128 /* horizontal */ 1129 ACCW(WINCLIP_H_0, 0x07ff0800); 1130 ACCW(WINCLIP_H_1, 0x07ff0800); 1131 ACCW(WINCLIP_H_2, 0x07ff0800); 1132 ACCW(WINCLIP_H_3, 0x07ff0800); 1133 ACCW(WINCLIP_H_4, 0x07ff0800); 1134 ACCW(WINCLIP_H_5, 0x07ff0800); 1135 ACCW(WINCLIP_H_6, 0x07ff0800); 1136 ACCW(WINCLIP_H_7, 0x07ff0800); 1137 /* vertical */ 1138 ACCW(WINCLIP_V_0, 0x07ff0800); 1139 ACCW(WINCLIP_V_1, 0x07ff0800); 1140 ACCW(WINCLIP_V_2, 0x07ff0800); 1141 ACCW(WINCLIP_V_3, 0x07ff0800); 1142 ACCW(WINCLIP_V_4, 0x07ff0800); 1143 ACCW(WINCLIP_V_5, 0x07ff0800); 1144 ACCW(WINCLIP_V_6, 0x07ff0800); 1145 ACCW(WINCLIP_V_7, 0x07ff0800); 1146 1147 /* setup (initialize) pipe */ 1148 /* set eyetype to local, lightning etc. is off */ 1149 ACCW(NV10_XFMOD0, 0x10000000); 1150 /* disable all lights */ 1151 ACCW(NV10_XFMOD1, 0x00000000); 1152 1153 /* note: upon writing data into the PIPEDAT register, the PIPEADR is 1154 * probably auto-incremented! */ 1155 /* (pipe adress = b2-16, pipe data = b0-31) */ 1156 ACCW(NV10_PIPEADR, 0x00006740); 1157 ACCW(NV10_PIPEDAT, 0x00000000); 1158 ACCW(NV10_PIPEDAT, 0x00000000); 1159 ACCW(NV10_PIPEDAT, 0x00000000); 1160 ACCW(NV10_PIPEDAT, 0x3f800000); 1161 1162 ACCW(NV10_PIPEADR, 0x00006750); 1163 ACCW(NV10_PIPEDAT, 0x40000000); 1164 ACCW(NV10_PIPEDAT, 0x40000000); 1165 ACCW(NV10_PIPEDAT, 0x40000000); 1166 ACCW(NV10_PIPEDAT, 0x40000000); 1167 1168 ACCW(NV10_PIPEADR, 0x00006760); 1169 ACCW(NV10_PIPEDAT, 0x00000000); 1170 ACCW(NV10_PIPEDAT, 0x00000000); 1171 ACCW(NV10_PIPEDAT, 0x3f800000); 1172 ACCW(NV10_PIPEDAT, 0x00000000); 1173 1174 ACCW(NV10_PIPEADR, 0x00006770); 1175 ACCW(NV10_PIPEDAT, 0xc5000000); 1176 ACCW(NV10_PIPEDAT, 0xc5000000); 1177 ACCW(NV10_PIPEDAT, 0x00000000); 1178 ACCW(NV10_PIPEDAT, 0x00000000); 1179 1180 ACCW(NV10_PIPEADR, 0x00006780); 1181 ACCW(NV10_PIPEDAT, 0x00000000); 1182 ACCW(NV10_PIPEDAT, 0x00000000); 1183 ACCW(NV10_PIPEDAT, 0x3f800000); 1184 ACCW(NV10_PIPEDAT, 0x00000000); 1185 1186 ACCW(NV10_PIPEADR, 0x000067a0); 1187 ACCW(NV10_PIPEDAT, 0x3f800000); 1188 ACCW(NV10_PIPEDAT, 0x3f800000); 1189 ACCW(NV10_PIPEDAT, 0x3f800000); 1190 ACCW(NV10_PIPEDAT, 0x3f800000); 1191 1192 ACCW(NV10_PIPEADR, 0x00006ab0); 1193 ACCW(NV10_PIPEDAT, 0x3f800000); 1194 ACCW(NV10_PIPEDAT, 0x3f800000); 1195 ACCW(NV10_PIPEDAT, 0x3f800000); 1196 1197 ACCW(NV10_PIPEADR, 0x00006ac0); 1198 ACCW(NV10_PIPEDAT, 0x00000000); 1199 ACCW(NV10_PIPEDAT, 0x00000000); 1200 ACCW(NV10_PIPEDAT, 0x00000000); 1201 1202 ACCW(NV10_PIPEADR, 0x00006c10); 1203 ACCW(NV10_PIPEDAT, 0xbf800000); 1204 1205 ACCW(NV10_PIPEADR, 0x00007030); 1206 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1207 1208 ACCW(NV10_PIPEADR, 0x00007040); 1209 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1210 1211 ACCW(NV10_PIPEADR, 0x00007050); 1212 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1213 1214 ACCW(NV10_PIPEADR, 0x00007060); 1215 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1216 1217 ACCW(NV10_PIPEADR, 0x00007070); 1218 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1219 1220 ACCW(NV10_PIPEADR, 0x00007080); 1221 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1222 1223 ACCW(NV10_PIPEADR, 0x00007090); 1224 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1225 1226 ACCW(NV10_PIPEADR, 0x000070a0); 1227 ACCW(NV10_PIPEDAT, 0x7149f2ca); 1228 1229 ACCW(NV10_PIPEADR, 0x00006a80); 1230 ACCW(NV10_PIPEDAT, 0x00000000); 1231 ACCW(NV10_PIPEDAT, 0x00000000); 1232 ACCW(NV10_PIPEDAT, 0x3f800000); 1233 1234 ACCW(NV10_PIPEADR, 0x00006aa0); 1235 ACCW(NV10_PIPEDAT, 0x00000000); 1236 ACCW(NV10_PIPEDAT, 0x00000000); 1237 ACCW(NV10_PIPEDAT, 0x00000000); 1238 1239 ACCW(NV10_PIPEADR, 0x00000040); 1240 ACCW(NV10_PIPEDAT, 0x00000005); 1241 1242 ACCW(NV10_PIPEADR, 0x00006400); 1243 ACCW(NV10_PIPEDAT, 0x3f800000); 1244 ACCW(NV10_PIPEDAT, 0x3f800000); 1245 ACCW(NV10_PIPEDAT, 0x4b7fffff); 1246 ACCW(NV10_PIPEDAT, 0x00000000); 1247 1248 ACCW(NV10_PIPEADR, 0x00006410); 1249 ACCW(NV10_PIPEDAT, 0xc5000000); 1250 ACCW(NV10_PIPEDAT, 0xc5000000); 1251 ACCW(NV10_PIPEDAT, 0x00000000); 1252 ACCW(NV10_PIPEDAT, 0x00000000); 1253 1254 ACCW(NV10_PIPEADR, 0x00006420); 1255 ACCW(NV10_PIPEDAT, 0x00000000); 1256 ACCW(NV10_PIPEDAT, 0x00000000); 1257 ACCW(NV10_PIPEDAT, 0x00000000); 1258 ACCW(NV10_PIPEDAT, 0x00000000); 1259 1260 ACCW(NV10_PIPEADR, 0x00006430); 1261 ACCW(NV10_PIPEDAT, 0x00000000); 1262 ACCW(NV10_PIPEDAT, 0x00000000); 1263 ACCW(NV10_PIPEDAT, 0x00000000); 1264 ACCW(NV10_PIPEDAT, 0x00000000); 1265 1266 ACCW(NV10_PIPEADR, 0x000064c0); 1267 ACCW(NV10_PIPEDAT, 0x3f800000); 1268 ACCW(NV10_PIPEDAT, 0x3f800000); 1269 ACCW(NV10_PIPEDAT, 0x477fffff); 1270 ACCW(NV10_PIPEDAT, 0x3f800000); 1271 1272 ACCW(NV10_PIPEADR, 0x000064d0); 1273 ACCW(NV10_PIPEDAT, 0xc5000000); 1274 ACCW(NV10_PIPEDAT, 0xc5000000); 1275 ACCW(NV10_PIPEDAT, 0x00000000); 1276 ACCW(NV10_PIPEDAT, 0x00000000); 1277 1278 ACCW(NV10_PIPEADR, 0x000064e0); 1279 ACCW(NV10_PIPEDAT, 0xc4fff000); 1280 ACCW(NV10_PIPEDAT, 0xc4fff000); 1281 ACCW(NV10_PIPEDAT, 0x00000000); 1282 ACCW(NV10_PIPEDAT, 0x00000000); 1283 1284 ACCW(NV10_PIPEADR, 0x000064f0); 1285 ACCW(NV10_PIPEDAT, 0x00000000); 1286 ACCW(NV10_PIPEDAT, 0x00000000); 1287 ACCW(NV10_PIPEDAT, 0x00000000); 1288 ACCW(NV10_PIPEDAT, 0x00000000); 1289 1290 /* turn lightning on */ 1291 ACCW(NV10_XFMOD0, 0x30000000); 1292 /* set light 1 to infinite type, other lights remain off */ 1293 ACCW(NV10_XFMOD1, 0x00000004); 1294 1295 /* Z-buffer state is: 1296 * initialized, set to: 'fixed point' (integer?); Z-buffer; 16bits depth */ 1297 /* note: 1298 * other options possible are: floating point; 24bits depth; W-buffer(?) */ 1299 ACCW(GLOB_STAT_0, 0x10000000); 1300 /* set DMA instance 2 and 3 to be invalid */ 1301 ACCW(GLOB_STAT_1, 0x00000000); 1302 } 1303} 1304 1305/* fixme? (check this out..) 1306 * Looks like this stuff can be very much simplified and speed-up, as it seems it's not 1307 * nessesary to wait for the engine to become idle before re-assigning channels. 1308 * Because the cmd handles are actually programmed _inside_ the fifo channels, it might 1309 * well be that the assignment is buffered along with the commands that still have to 1310 * be executed! 1311 * (sounds very plausible to me :) */ 1312void nv_acc_assert_fifo(void) 1313{ 1314 /* does every engine cmd this accelerant needs have a FIFO channel? */ 1315 //fixme: can probably be optimized for both speed and channel selection... 1316 if (!si->engine.fifo.ch_ptr[NV_ROP5_SOLID] || 1317 !si->engine.fifo.ch_ptr[NV_IMAGE_BLACK_RECTANGLE] || 1318 !si->engine.fifo.ch_ptr[NV_IMAGE_PATTERN] || 1319 !si->engine.fifo.ch_ptr[NV_IMAGE_BLIT] || 1320 !si->engine.fifo.ch_ptr[NV4_GDI_RECTANGLE_TEXT]) 1321 { 1322 uint16 cnt; 1323 1324 /* no, wait until the engine is idle before re-assigning the FIFO */ 1325 nv_acc_wait_idle(); 1326 1327 /* free the FIFO channels we want from the currently assigned cmd's */ 1328 si->engine.fifo.ch_ptr[si->engine.fifo.handle[0]] = 0; 1329 si->engine.fifo.ch_ptr[si->engine.fifo.handle[1]] = 0; 1330 si->engine.fifo.ch_ptr[si->engine.fifo.handle[2]] = 0; 1331 si->engine.fifo.ch_ptr[si->engine.fifo.handle[4]] = 0; 1332 si->engine.fifo.ch_ptr[si->engine.fifo.handle[5]] = 0; 1333 1334 /* set new object handles */ 1335 si->engine.fifo.handle[0] = NV_ROP5_SOLID; 1336 si->engine.fifo.handle[1] = NV_IMAGE_BLACK_RECTANGLE; 1337 si->engine.fifo.handle[2] = NV_IMAGE_PATTERN; 1338 si->engine.fifo.handle[4] = NV_IMAGE_BLIT; 1339 si->engine.fifo.handle[5] = NV4_GDI_RECTANGLE_TEXT; 1340 1341 /* set handle's pointers to their assigned FIFO channels */ 1342 for (cnt = 0; cnt < 0x08; cnt++) 1343 { 1344 si->engine.fifo.ch_ptr[(si->engine.fifo.handle[cnt])] = 1345 (NVACC_FIFO + (cnt * 0x00002000)); 1346 } 1347 1348 /* program new FIFO assignments */ 1349 ACCW(FIFO_CH0, (0x80000000 | si->engine.fifo.handle[0])); /* Raster OPeration */ 1350 ACCW(FIFO_CH1, (0x80000000 | si->engine.fifo.handle[1])); /* Clip */ 1351 ACCW(FIFO_CH2, (0x80000000 | si->engine.fifo.handle[2])); /* Pattern */ 1352 ACCW(FIFO_CH4, (0x80000000 | si->engine.fifo.handle[4])); /* Blit */ 1353 ACCW(FIFO_CH5, (0x80000000 | si->engine.fifo.handle[5])); /* Bitmap */ 1354 } 1355 1356 /* update our local pointers */ 1357 nv_rop5_solid_ptr = (cmd_nv_rop5_solid*) 1358 &(regs[(si->engine.fifo.ch_ptr[NV_ROP5_SOLID]) >> 2]); 1359 1360 nv_image_black_rectangle_ptr = (cmd_nv_image_black_rectangle*) 1361 &(regs[(si->engine.fifo.ch_ptr[NV_IMAGE_BLACK_RECTANGLE]) >> 2]); 1362 1363 nv_image_pattern_ptr = (cmd_nv_image_pattern*) 1364 &(regs[(si->engine.fifo.ch_ptr[NV_IMAGE_PATTERN]) >> 2]); 1365 1366 nv_image_blit_ptr = (cmd_nv_image_blit*) 1367 &(regs[(si->engine.fifo.ch_ptr[NV_IMAGE_BLIT]) >> 2]); 1368 1369 nv3_gdi_rectangle_text_ptr = (cmd_nv3_gdi_rectangle_text*) 1370 &(regs[(si->engine.fifo.ch_ptr[NV4_GDI_RECTANGLE_TEXT]) >> 2]); 1371} 1372 1373/* screen to screen blit - i.e. move windows around and scroll within them. */ 1374status_t nv_acc_setup_blit() 1375{ 1376 /* setup solid pattern: 1377 * wait for room in fifo for pattern cmd if needed. 1378 * (fifo holds 256 32bit words: count those, not bytes) */ 1379 while (((nv_image_pattern_ptr->FifoFree) >> 2) < 5) 1380 { 1381 /* snooze a bit so I do not hammer the bus */ 1382 snooze (10); 1383 } 1384 /* now setup pattern (writing 5 32bit words) */ 1385 nv_image_pattern_ptr->SetShape = 0x00000000; /* 0 = 8x8, 1 = 64x1, 2 = 1x64 */ 1386 nv_image_pattern_ptr->SetColor0 = 0xffffffff; 1387 nv_image_pattern_ptr->SetColor1 = 0xffffffff; 1388 nv_image_pattern_ptr->SetPattern[0] = 0xffffffff; 1389 nv_image_pattern_ptr->SetPattern[1] = 0xffffffff; 1390 1391 /* ROP registers (Raster OPeration): 1392 * wait for room in fifo for ROP cmd if needed. 1393 * (fifo holds 256 32bit words: count those, not bytes) */ 1394 while (((nv_rop5_solid_ptr->FifoFree) >> 2) < 1) 1395 { 1396 /* snooze a bit so I do not hammer the bus */ 1397 snooze (10); 1398 } 1399 /* now setup ROP (writing 1 32bit word) */ 1400 nv_rop5_solid_ptr->SetRop5 = 0xcc; 1401 1402 return B_OK; 1403} 1404 1405status_t nv_acc_blit(uint16 xs,uint16 ys,uint16 xd,uint16 yd,uint16 w,uint16 h) 1406{ 1407 /* Note: blit-copy direction is determined inside riva hardware: no setup needed */ 1408 1409 /* instruct engine what to blit: 1410 * wait for room in fifo for blit cmd if needed. 1411 * (fifo holds 256 32bit words: count those, not bytes) */ 1412 while (((nv_image_blit_ptr->FifoFree) >> 2) < 3) 1413 { 1414 /* snooze a bit so I do not hammer the bus */ 1415 snooze (10); 1416 } 1417 /* now setup blit (writing 3 32bit words) */ 1418 nv_image_blit_ptr->SourceOrg = ((ys << 16) | xs); 1419 nv_image_blit_ptr->DestOrg = ((yd << 16) | xd); 1420 nv_image_blit_ptr->HeightWidth = (((h + 1) << 16) | (w + 1)); 1421 1422 return B_OK; 1423} 1424 1425/* rectangle fill - i.e. workspace and window background color */ 1426/* span fill - i.e. (selected) menuitem background color (Dano) */ 1427status_t nv_acc_setup_rectangle(uint32 color) 1428{ 1429 /* setup solid pattern: 1430 * wait for room in fifo for pattern cmd if needed. 1431 * (fifo holds 256 32bit words: count those, not bytes) */ 1432 while (((nv_image_pattern_ptr->FifoFree) >> 2) < 5) 1433 { 1434 /* snooze a bit so I do not hammer the bus */ 1435 snooze (10); 1436 } 1437 /* now setup pattern (writing 5 32bit words) */ 1438 nv_image_pattern_ptr->SetShape = 0x00000000; /* 0 = 8x8, 1 = 64x1, 2 = 1x64 */ 1439 nv_image_pattern_ptr->SetColor0 = 0xffffffff; 1440 nv_image_pattern_ptr->SetColor1 = 0xffffffff; 1441 nv_image_pattern_ptr->SetPattern[0] = 0xffffffff; 1442 nv_image_pattern_ptr->SetPattern[1] = 0xffffffff; 1443 1444 /* ROP registers (Raster OPeration): 1445 * wait for room in fifo for ROP cmd if needed. 1446 * (fifo holds 256 32bit words: count those, not bytes) */ 1447 while (((nv_rop5_solid_ptr->FifoFree) >> 2) < 1) 1448 { 1449 /* snooze a bit so I do not hammer the bus */ 1450 snooze (10); 1451 } 1452 /* now setup ROP (writing 1 32bit word) for GXcopy */ 1453 nv_rop5_solid_ptr->SetRop5 = 0xcc; 1454 1455 /* setup fill color: 1456 * wait for room in fifo for bitmap cmd if needed. 1457 * (fifo holds 256 32bit words: count those, not bytes) */ 1458 while (((nv3_gdi_rectangle_text_ptr->FifoFree) >> 2) < 1) 1459 { 1460 /* snooze a bit so I do not hammer the bus */ 1461 snooze (10); 1462 } 1463 /* now setup color (writing 1 32bit word) */ 1464 nv3_gdi_rectangle_text_ptr->Color1A = color; 1465 1466 return B_OK; 1467} 1468 1469status_t nv_acc_rectangle(uint32 xs,uint32 xe,uint32 ys,uint32 yl) 1470{ 1471 /* instruct engine what to fill: 1472 * wait for room in fifo for bitmap cmd if needed. 1473 * (fifo holds 256 32bit words: count those, not bytes) */ 1474 while (((nv3_gdi_rectangle_text_ptr->FifoFree) >> 2) < 2) 1475 { 1476 /* snooze a bit so I do not hammer the bus */ 1477 snooze (10); 1478 } 1479 /* now setup fill (writing 2 32bit words) */ 1480 nv3_gdi_rectangle_text_ptr->UnclippedRectangle[0].LeftTop = 1481 ((xs << 16) | (ys & 0x0000ffff)); 1482 nv3_gdi_rectangle_text_ptr->UnclippedRectangle[0].WidthHeight = 1483 (((xe - xs) << 16) | (yl & 0x0000ffff)); 1484 1485 return B_OK; 1486} 1487 1488/* rectangle invert - i.e. text cursor and text selection */ 1489status_t nv_acc_setup_rect_invert() 1490{ 1491 /* setup solid pattern: 1492 * wait for room in fifo for pattern cmd if needed. 1493 * (fifo holds 256 32bit words: count those, not bytes) */ 1494 while (((nv_image_pattern_ptr->FifoFree) >> 2) < 5) 1495 { 1496 /* snooze a bit so I do not hammer the bus */ 1497 snooze (10); 1498 } 1499 /* now setup pattern (writing 5 32bit words) */ 1500 nv_image_pattern_ptr->SetShape = 0x00000000; /* 0 = 8x8, 1 = 64x1, 2 = 1x64 */ 1501 nv_image_pattern_ptr->SetColor0 = 0xffffffff; 1502 nv_image_pattern_ptr->SetColor1 = 0xffffffff; 1503 nv_image_pattern_ptr->SetPattern[0] = 0xffffffff; 1504 nv_image_pattern_ptr->SetPattern[1] = 0xffffffff; 1505 1506 /* ROP registers (Raster OPeration): 1507 * wait for room in fifo for ROP cmd if needed. 1508 * (fifo holds 256 32bit words: count those, not bytes) */ 1509 while (((nv_rop5_solid_ptr->FifoFree) >> 2) < 1) 1510 { 1511 /* snooze a bit so I do not hammer the bus */ 1512 snooze (10); 1513 } 1514 /* now setup ROP (writing 1 32bit word) for GXinvert */ 1515 nv_rop5_solid_ptr->SetRop5 = 0x55; 1516 1517 /* reset fill color: 1518 * wait for room in fifo for bitmap cmd if needed. 1519 * (fifo holds 256 32bit words: count those, not bytes) */ 1520 while (((nv3_gdi_rectangle_text_ptr->FifoFree) >> 2) < 1) 1521 { 1522 /* snooze a bit so I do not hammer the bus */ 1523 snooze (10); 1524 } 1525 /* now reset color (writing 1 32bit word) */ 1526 nv3_gdi_rectangle_text_ptr->Color1A = 0x00000000; 1527 1528 return B_OK; 1529} 1530 1531status_t nv_acc_rectangle_invert(uint32 xs,uint32 xe,uint32 ys,uint32 yl) 1532{ 1533 /* instruct engine what to invert: 1534 * wait for room in fifo for bitmap cmd if needed. 1535 * (fifo holds 256 32bit words: count those, not bytes) */ 1536 while (((nv3_gdi_rectangle_text_ptr->FifoFree) >> 2) < 2) 1537 { 1538 /* snooze a bit so I do not hammer the bus */ 1539 snooze (10); 1540 } 1541 /* now setup invert (writing 2 32bit words) */ 1542 nv3_gdi_rectangle_text_ptr->UnclippedRectangle[0].LeftTop = 1543 ((xs << 16) | (ys & 0x0000ffff)); 1544 nv3_gdi_rectangle_text_ptr->UnclippedRectangle[0].WidthHeight = 1545 (((xe - xs) << 16) | (yl & 0x0000ffff)); 1546 1547 return B_OK; 1548} 1549 1550/* screen to screen tranparent blit */ 1551status_t nv_acc_transparent_blit(uint16 xs,uint16 ys,uint16 xd,uint16 yd,uint16 w,uint16 h,uint32 colour) 1552{ 1553 //fixme: implement. 1554 1555 return B_ERROR; 1556} 1557 1558/* screen to screen scaled filtered blit - i.e. scale video in memory */ 1559status_t nv_acc_video_blit(uint16 xs,uint16 ys,uint16 ws, uint16 hs, 1560 uint16 xd,uint16 yd,uint16 wd,uint16 hd) 1561{ 1562 //fixme: implement. 1563 1564 return B_ERROR; 1565} 1566