1# Copyright (C) 2014-2017 Free Software Foundation, Inc. 2# 3# Copying and distribution of this file, with or without modification, 4# are permitted in any medium without royalty provided the copyright 5# notice and this notice are preserved. 6# 7# Unusual variables checked by this code: 8# NOP - four byte opcode for no-op (defaults to 0) 9# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not 10# empty. 11# SMALL_DATA_CTOR - .ctors contains small data. 12# SMALL_DATA_DTOR - .dtors contains small data. 13# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start 14# INITIAL_READONLY_SECTIONS - at start of text segment 15# OTHER_READONLY_SECTIONS - other than .text .init .rodata ... 16# (e.g., .PARISC.milli) 17# OTHER_TEXT_SECTIONS - these get put in .text when relocating 18# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... 19# (e.g., .PARISC.global) 20# OTHER_RELRO_SECTIONS - other than .data.rel.ro ... 21# (e.g. PPC32 .fixup, .got[12]) 22# OTHER_BSS_SECTIONS - other than .bss .sbss ... 23# ATTRS_SECTIONS - at the end 24# OTHER_SECTIONS - at the end 25# EXECUTABLE_SYMBOLS - symbols that must be defined for an 26# executable (e.g., _DYNAMIC_LINK) 27# TEXT_START_ADDR - the first byte of the text segment, after any 28# headers. 29# TEXT_BASE_ADDRESS - the first byte of the text segment. 30# TEXT_START_SYMBOLS - symbols that appear at the start of the 31# .text section. 32# DATA_START_SYMBOLS - symbols that appear at the start of the 33# .data section. 34# DATA_END_SYMBOLS - symbols that appear at the end of the 35# writeable data sections. 36# OTHER_GOT_SYMBOLS - symbols defined just before .got. 37# OTHER_GOT_SECTIONS - sections just after .got. 38# OTHER_SDATA_SECTIONS - sections just after .sdata. 39# OTHER_BSS_SYMBOLS - symbols that appear at the start of the 40# .bss section besides __bss_start. 41# DATA_PLT - .plt should be in data segment, not text segment. 42# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement. 43# BSS_PLT - .plt should be in bss segment 44# NO_REL_RELOCS - Don't include .rel.* sections in script 45# NO_RELA_RELOCS - Don't include .rela.* sections in script 46# NON_ALLOC_DYN - Place dynamic sections after data segment. 47# TEXT_DYNAMIC - .dynamic in text segment, not data segment. 48# EMBEDDED - whether this is for an embedded system. 49# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set 50# start address of shared library. 51# INPUT_FILES - INPUT command of files to always include 52# WRITABLE_RODATA - if set, the .rodata section should be writable 53# INIT_START, INIT_END - statements just before and just after 54# combination of .init sections. 55# FINI_START, FINI_END - statements just before and just after 56# combination of .fini sections. 57# STACK_ADDR - start of a .stack section. 58# OTHER_SYMBOLS - symbols to place right at the end of the script. 59# ETEXT_NAME - name of a symbol for the end of the text section, 60# normally etext. 61# SEPARATE_GOTPLT - if set, .got.plt should be separate output section, 62# so that .got can be in the RELRO area. It should be set to 63# the number of bytes in the beginning of .got.plt which can be 64# in the RELRO area as well. 65# USER_LABEL_PREFIX - prefix to add to user-visible symbols. 66# 67# When adding sections, do note that the names of some sections are used 68# when specifying the start address of the next. 69# 70 71# Many sections come in three flavours. There is the 'real' section, 72# like ".data". Then there are the per-procedure or per-variable 73# sections, generated by -ffunction-sections and -fdata-sections in GCC, 74# and useful for --gc-sections, which for a variable "foo" might be 75# ".data.foo". Then there are the linkonce sections, for which the linker 76# eliminates duplicates, which are named like ".gnu.linkonce.d.foo". 77# The exact correspondences are: 78# 79# Section Linkonce section 80# .text .gnu.linkonce.t.foo 81# .rodata .gnu.linkonce.r.foo 82# .data .gnu.linkonce.d.foo 83# .bss .gnu.linkonce.b.foo 84# .sdata .gnu.linkonce.s.foo 85# .sbss .gnu.linkonce.sb.foo 86# .sdata2 .gnu.linkonce.s2.foo 87# .sbss2 .gnu.linkonce.sb2.foo 88# .debug_info .gnu.linkonce.wi.foo 89# .tdata .gnu.linkonce.td.foo 90# .tbss .gnu.linkonce.tb.foo 91# .lrodata .gnu.linkonce.lr.foo 92# .ldata .gnu.linkonce.l.foo 93# .lbss .gnu.linkonce.lb.foo 94# 95# Each of these can also have corresponding .rel.* and .rela.* sections. 96 97test -z "$ENTRY" && ENTRY=_start 98test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} 99test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} 100if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi 101test -z "${ELFSIZE}" && ELFSIZE=32 102test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" 103test "$LD_FLAG" = "N" && DATA_ADDR=. 104test -z "${ETEXT_NAME}" && ETEXT_NAME=etext 105test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" 106test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" 107test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT 108test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" 109DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" 110DATA_SEGMENT_RELRO_END="" 111DATA_SEGMENT_END="" 112if test -n "${COMMONPAGESIZE}"; then 113 DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" 114 DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" 115 DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);" 116fi 117if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then 118 INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }" 119fi 120if test -z "$PLT"; then 121 PLT=".plt ${RELOCATING-0} : { *(.plt) }" 122fi 123test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes 124if test -z "$GOT"; then 125 if test -z "$SEPARATE_GOTPLT"; then 126 GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }" 127 else 128 GOT=".got ${RELOCATING-0} : { *(.got) }" 129 GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }" 130 fi 131fi 132DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" 133RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" 134DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro .data.rel.ro.* .gnu.linkonce.d.rel.ro.*) }" 135DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }" 136if test -z "${NO_SMALL_DATA}"; then 137 SBSS=".sbss ${RELOCATING-0} : 138 { 139 ${RELOCATING+${SBSS_START_SYMBOLS}} 140 ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)} 141 *(.dynsbss) 142 *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) 143 *(.scommon) 144 ${RELOCATING+${SBSS_END_SYMBOLS}} 145 }" 146 SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" 147 SDATA="/* We want the small data sections together, so single-instruction offsets 148 can access them all, and initialized data all before uninitialized, so 149 we can shorten the on-disk segment size. */ 150 .sdata ${RELOCATING-0} : 151 { 152 ${RELOCATING+${SDATA_START_SYMBOLS}} 153 ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)} 154 *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) 155 }" 156 SDATA2=".sdata2 ${RELOCATING-0} : 157 { 158 ${RELOCATING+${SDATA2_START_SYMBOLS}} 159 *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) 160 }" 161 REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } 162 .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" 163 REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } 164 .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" 165 REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } 166 .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" 167 REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } 168 .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" 169else 170 NO_SMALL_DATA=" " 171fi 172if test -z "${DATA_GOT}"; then 173 if test -n "${NO_SMALL_DATA}"; then 174 DATA_GOT=" " 175 fi 176fi 177if test -z "${SDATA_GOT}"; then 178 if test -z "${NO_SMALL_DATA}"; then 179 SDATA_GOT=" " 180 fi 181fi 182test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " 183test "${LARGE_SECTIONS}" = "yes" && REL_LARGE=" 184 .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) } 185 .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) } 186 .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) } 187 .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) } 188 .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) } 189 .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }" 190test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS=" 191 ${OTHER_BSS_SECTIONS} 192 .lbss ${RELOCATING-0} : 193 { 194 *(.dynlbss) 195 *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*}) 196 *(LARGE_COMMON) 197 }" 198test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS=" 199 .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : 200 { 201 *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*}) 202 } 203 .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : 204 { 205 *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*}) 206 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} 207 }" 208INIT_ARRAY=".init_array ${RELOCATING-0} : 209 { 210 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}} 211 KEEP (*(SORT(.init_array.*))) 212 KEEP (*(.init_array)) 213 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}} 214 }" 215FINI_ARRAY=".fini_array ${RELOCATING-0} : 216 { 217 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}} 218 KEEP (*(SORT(.fini_array.*))) 219 KEEP (*(.fini_array)) 220 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}} 221 }" 222CTOR=".ctors ${CONSTRUCTING-0} : 223 { 224 ${CONSTRUCTING+${CTOR_START}} 225 /* gcc uses crtbegin.o to find the start of 226 the constructors, so we make sure it is 227 first. Because this is a wildcard, it 228 doesn't matter if the user does not 229 actually link against crtbegin.o; the 230 linker won't look for a file to match a 231 wildcard. The wildcard also means that it 232 doesn't matter which directory crtbegin.o 233 is in. */ 234 235 KEEP (*crtbegin.o(.ctors)) 236 KEEP (*crtbegin?.o(.ctors)) 237 238 /* We don't want to include the .ctor section from 239 the crtend.o file until after the sorted ctors. 240 The .ctor section from the crtend file contains the 241 end of ctors marker and it must be last */ 242 243 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) 244 KEEP (*(SORT(.ctors.*))) 245 KEEP (*(.ctors)) 246 ${CONSTRUCTING+${CTOR_END}} 247 }" 248DTOR=".dtors ${CONSTRUCTING-0} : 249 { 250 ${CONSTRUCTING+${DTOR_START}} 251 KEEP (*crtbegin.o(.dtors)) 252 KEEP (*crtbegin?.o(.dtors)) 253 KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) 254 KEEP (*(SORT(.dtors.*))) 255 KEEP (*(.dtors)) 256 ${CONSTRUCTING+${DTOR_END}} 257 }" 258STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : 259 { 260 ${RELOCATING+_stack = .;} 261 *(.stack) 262 }" 263 264TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${TEXT_START_ADDR})" 265SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${SHLIB_TEXT_START_ADDR:-0})" 266 267# If this is for an embedded system, don't add SIZEOF_HEADERS. 268if [ -z "$EMBEDDED" ]; then 269 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" 270else 271 test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" 272fi 273 274cat <<EOF 275/* Copyright (C) 2014-2017 Free Software Foundation, Inc. 276 277 Copying and distribution of this script, with or without modification, 278 are permitted in any medium without royalty provided the copyright 279 notice and this notice are preserved. */ 280 281OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", 282 "${LITTLE_OUTPUT_FORMAT}") 283OUTPUT_ARCH(${OUTPUT_ARCH}) 284${RELOCATING+ENTRY(${ENTRY})} 285 286${RELOCATING+${LIB_SEARCH_DIRS}} 287${RELOCATING+${EXECUTABLE_SYMBOLS}} 288${RELOCATING+${INPUT_FILES}} 289${RELOCATING- /* For some reason, the Solaris linker makes bad executables 290 if gld -r is used and the intermediate file has sections starting 291 at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld 292 bug. But for now assigning the zero vmas works. */} 293 294SECTIONS 295{ 296 /* Read-only sections, merged into text segment: */ 297 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}} 298 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS;}} 299 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS;}} 300 ${INITIAL_READONLY_SECTIONS} 301 .note.gnu.build-id : { *(.note.gnu.build-id) } 302EOF 303 304test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN 305test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC= 306cat > ldscripts/dyntmp.$$ <<EOF 307 ${TEXT_DYNAMIC+${DYNAMIC}} 308 .hash ${RELOCATING-0} : { *(.hash) } 309 .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) } 310 .dynsym ${RELOCATING-0} : { *(.dynsym) } 311 .dynstr ${RELOCATING-0} : { *(.dynstr) } 312 .gnu.version ${RELOCATING-0} : { *(.gnu.version) } 313 .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } 314 .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } 315EOF 316 317if [ "x$COMBRELOC" = x ]; then 318 COMBRELOCCAT="cat >> ldscripts/dyntmp.$$" 319else 320 COMBRELOCCAT="cat > $COMBRELOC" 321fi 322eval $COMBRELOCCAT <<EOF 323 .rel.init ${RELOCATING-0} : { *(.rel.init) } 324 .rela.init ${RELOCATING-0} : { *(.rela.init) } 325 .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } 326 .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } 327 .rel.fini ${RELOCATING-0} : { *(.rel.fini) } 328 .rela.fini ${RELOCATING-0} : { *(.rela.fini) } 329 .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } 330 .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } 331 ${OTHER_READONLY_RELOC_SECTIONS} 332 .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.* .rel.gnu.linkonce.d.rel.ro.*}) } 333 .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.* .rela.gnu.linkonce.d.rel.ro.*}) } 334 .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } 335 .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } 336 .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } 337 .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } 338 .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } 339 .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } 340 .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } 341 .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } 342 .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } 343 .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } 344 .rel.got ${RELOCATING-0} : { *(.rel.got) } 345 .rela.got ${RELOCATING-0} : { *(.rela.got) } 346 ${OTHER_GOT_RELOC_SECTIONS} 347 ${REL_SDATA} 348 ${REL_SBSS} 349 ${REL_SDATA2} 350 ${REL_SBSS2} 351 .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } 352 .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } 353 ${REL_LARGE} 354EOF 355 356if [ -n "$COMBRELOC" ]; then 357cat >> ldscripts/dyntmp.$$ <<EOF 358 .rel.dyn ${RELOCATING-0} : 359 { 360EOF 361sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ 362cat >> ldscripts/dyntmp.$$ <<EOF 363 } 364 .rel.ifunc.dyn ${RELOCATING-0} : 365 { 366 *(.rel.ifunc.*) 367 } 368 .rela.dyn ${RELOCATING-0} : 369 { 370EOF 371sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ 372cat >> ldscripts/dyntmp.$$ <<EOF 373 } 374 .rela.ifunc.dyn ${RELOCATING-0} : 375 { 376 *(.rela.ifunc.*) 377 } 378EOF 379fi 380 381cat >> ldscripts/dyntmp.$$ <<EOF 382 .rel.plt ${RELOCATING-0} : { *(.rel.plt) } 383 .rela.plt ${RELOCATING-0} : { *(.rela.plt) } 384 ${OTHER_PLT_RELOC_SECTIONS} 385EOF 386 387if test -z "${NON_ALLOC_DYN}"; then 388 if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then 389 cat ldscripts/dyntmp.$$ 390 else 391 if test -z "${NO_REL_RELOCS}"; then 392 sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d' -e '/^[ ]*\.rela\./d' ldscripts/dyntmp.$$ 393 fi 394 if test -z "${NO_RELA_RELOCS}"; then 395 sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d' -e '/^[ ]*\.rel\./d' ldscripts/dyntmp.$$ 396 fi 397 fi 398 rm -f ldscripts/dyntmp.$$ 399fi 400 401cat <<EOF 402 .init ${RELOCATING-0} : 403 { 404 ${RELOCATING+${INIT_START}} 405 KEEP (*(.init)) 406 ${RELOCATING+${INIT_END}} 407 } =${NOP-0} 408 409 ${TEXT_PLT+${PLT}} 410 ${TINY_READONLY_SECTION} 411 .text ${RELOCATING-0} : 412 { 413 ${RELOCATING+${TEXT_START_SYMBOLS}} 414 *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) 415 /* .gnu.warning sections are handled specially by elf32.em. */ 416 *(.gnu.warning) 417 ${RELOCATING+${OTHER_TEXT_SECTIONS}} 418 } =${NOP-0} 419 .fini ${RELOCATING-0} : 420 { 421 ${RELOCATING+${FINI_START}} 422 KEEP (*(.fini)) 423 ${RELOCATING+${FINI_END}} 424 } =${NOP-0} 425 ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);} 426 ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);} 427 ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);} 428 ${WRITABLE_RODATA-${RODATA}} 429 .rodata1 ${RELOCATING-0} : { *(.rodata1) } 430 ${CREATE_SHLIB-${SDATA2}} 431 ${CREATE_SHLIB-${SBSS2}} 432 ${OTHER_READONLY_SECTIONS} 433 .eh_frame_hdr : { *(.eh_frame_hdr) } 434 .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } 435 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) } 436 437 /* Adjust the address for the data segment. We want to adjust up to 438 the same address within the page on the next page up. */ 439 ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} 440 ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} 441 ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} 442 443 /* Exception handling */ 444 .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } 445 .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } 446 447 /* Thread Local Storage sections */ 448 .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } 449 450 .preinit_array ${RELOCATING-0} : 451 { 452 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}} 453 KEEP (*(.preinit_array)) 454 ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}} 455 } 456 ${RELOCATING+${INIT_ARRAY}} 457 ${RELOCATING+${FINI_ARRAY}} 458 ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}} 459 ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}} 460 .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } 461 462 ${RELOCATING+${DATARELRO}} 463 ${OTHER_RELRO_SECTIONS} 464 ${TEXT_DYNAMIC-${DYNAMIC}} 465 ${DATA_GOT+${RELRO_NOW+${GOT}}} 466 ${DATA_GOT+${RELRO_NOW+${GOTPLT}}} 467 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}} 468 ${RELOCATING+${DATA_SEGMENT_RELRO_END}} 469 ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}} 470 ${DATA_GOT+${RELRO_NOW-${GOTPLT}}} 471 472 ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} 473 474 .data ${RELOCATING-0} : 475 { 476 ${RELOCATING+${DATA_START_SYMBOLS}} 477 *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) 478 ${CONSTRUCTING+SORT(CONSTRUCTORS)} 479 } 480 .data1 ${RELOCATING-0} : { *(.data1) } 481 ${WRITABLE_RODATA+${RODATA}} 482 ${OTHER_READWRITE_SECTIONS} 483 ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}} 484 ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}} 485 ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} 486 ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}} 487 ${SDATA_GOT+${GOT}} 488 ${SDATA_GOT+${OTHER_GOT_SECTIONS}} 489 ${SDATA} 490 ${OTHER_SDATA_SECTIONS} 491 ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}} 492 ${RELOCATING+__bss_start = .;} 493 ${RELOCATING+${OTHER_BSS_SYMBOLS}} 494 ${SBSS} 495 ${BSS_PLT+${PLT}} 496 .bss ${RELOCATING-0} : 497 { 498 *(.dynbss) 499 *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) 500 *(COMMON) 501 /* Align here to ensure that the .bss section occupies space up to 502 _end. Align after .bss to ensure correct alignment even if the 503 .bss section disappears because there are no input sections. 504 FIXME: Why do we need it? When there is no .bss section, we don't 505 pad the .data section. */ 506 ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} 507 } 508 ${OTHER_BSS_SECTIONS} 509 ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} 510 ${RELOCATING+. = ALIGN(${ALIGNMENT});} 511 ${LARGE_SECTIONS} 512 ${RELOCATING+. = ALIGN(${ALIGNMENT});} 513 ${RELOCATING+${OTHER_END_SYMBOLS}} 514 ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}} 515 ${RELOCATING+${DATA_SEGMENT_END}} 516EOF 517 518if test -n "${NON_ALLOC_DYN}"; then 519 if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then 520 cat ldscripts/dyntmp.$$ 521 else 522 if test -z "${NO_REL_RELOCS}"; then 523 sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d' -e '/^[ ]*\.rela\./d' ldscripts/dyntmp.$$ 524 fi 525 if test -z "${NO_RELA_RELOCS}"; then 526 sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d' -e '/^[ ]*\.rel\./d' ldscripts/dyntmp.$$ 527 fi 528 fi 529 rm -f ldscripts/dyntmp.$$ 530fi 531 532cat <<EOF 533 /* Stabs debugging sections. */ 534 .stab 0 : { *(.stab) } 535 .stabstr 0 : { *(.stabstr) } 536 .stab.excl 0 : { *(.stab.excl) } 537 .stab.exclstr 0 : { *(.stab.exclstr) } 538 .stab.index 0 : { *(.stab.index) } 539 .stab.indexstr 0 : { *(.stab.indexstr) } 540 541 .comment 0 : { *(.comment) } 542 543EOF 544 545. $srcdir/scripttempl/DWARF.sc 546 547cat <<EOF 548 ${TINY_DATA_SECTION} 549 ${TINY_BSS_SECTION} 550 551 ${STACK_ADDR+${STACK}} 552 ${ATTRS_SECTIONS} 553 ${OTHER_SECTIONS} 554 ${RELOCATING+${OTHER_SYMBOLS}} 555 ${RELOCATING+${DISCARDED}} 556} 557EOF 558