1## Process this file with automake to generate Makefile.in 2# 3# Copyright (C) 2012-2017 Free Software Foundation, Inc. 4# 5# This file is free software; you can redistribute it and/or modify 6# it under the terms of the GNU General Public License as published by 7# the Free Software Foundation; either version 3 of the License, or 8# (at your option) any later version. 9# 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY; without even the implied warranty of 12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13# GNU General Public License for more details. 14# 15# You should have received a copy of the GNU General Public License 16# along with this program; see the file COPYING3. If not see 17# <http://www.gnu.org/licenses/>. 18# 19 20AUTOMAKE_OPTIONS = dejagnu no-dist foreign 21ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd 22 23SUBDIRS = doc po 24 25tooldir = $(exec_prefix)/$(target_alias) 26 27## These aren't set by automake, because they appear in 28## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and 29## thus is not seen by automake. 30CC_FOR_BUILD = @CC_FOR_BUILD@ 31EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ 32 33YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` 34YFLAGS = -d 35LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` 36LEXLIB = @LEXLIB@ 37 38# Automake 1.10+ disables lex and yacc output file regeneration if 39# maintainer mode is disabled. Avoid this. 40am__skiplex = 41am__skipyacc = 42 43# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is 44# -I../zlib, unless we were configured with --with-system-zlib, in which 45# case both are empty. 46ZLIB = @zlibdir@ -lz 47ZLIBINC = @zlibinc@ 48 49WARN_CFLAGS = @WARN_CFLAGS@ 50WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@ 51NO_WERROR = @NO_WERROR@ 52AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC) 53AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC) 54LIBICONV = @LIBICONV@ 55 56# these two are almost the same program 57AR_PROG=ar 58RANLIB_PROG=ranlib 59 60# objcopy and strip should be the same program 61OBJCOPY_PROG=objcopy 62STRIP_PROG=strip-new 63 64STRINGS_PROG=strings 65 66READELF_PROG=readelf 67 68ELFEDIT_PROG=elfedit 69 70# These should all be the same program too. 71SIZE_PROG=size 72NM_PROG=nm-new 73OBJDUMP_PROG=objdump 74 75# This is the demangler, as a standalone program. 76# Note: This one is used as the installed name too, unlike the above. 77DEMANGLER_PROG=cxxfilt 78 79ADDR2LINE_PROG=addr2line 80 81NLMCONV_PROG=nlmconv 82DLLTOOL_PROG=dlltool 83WINDRES_PROG=windres 84WINDMC_PROG=windmc 85DLLWRAP_PROG=dllwrap 86 87SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) 88 89bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ 90 91bin_SCRIPTS = @BUILD_INSTALL_MISC@ 92EXTRA_SCRIPTS = embedspu 93 94## Test programs. 95BFDTEST1_PROG = bfdtest1 96BFDTEST2_PROG = bfdtest2 97 98TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) 99 100## We need a special rule to install the programs which are built with 101## -new, and to rename cxxfilt to c++filt. 102RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) 103noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ 104 105EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) 106 107# Stuff that goes in tooldir/ if appropriate. 108TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf 109 110BASEDIR = $(srcdir)/.. 111BFDDIR = $(BASEDIR)/bfd 112INCDIR = $(BASEDIR)/include 113 114AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ 115 @HDEFINES@ \ 116 @INCINTL@ \ 117 -DLOCALEDIR="\"$(datadir)/locale\"" \ 118 -Dbin_dummy_emulation=$(EMULATION_VECTOR) 119 120HFILES = \ 121 arsup.h binemul.h bucomm.h budbg.h \ 122 coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \ 123 objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ 124 windmc.h 125 126GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h 127BUILT_SOURCES = $(GENERATED_HFILES) 128 129CFILES = \ 130 addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ 131 coffdump.c coffgrok.c cxxfilt.c \ 132 dwarf.c debug.c dlltool.c dllwrap.c \ 133 elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ 134 ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ 135 nlmconv.c nm.c not-ranlib.c not-strip.c \ 136 objcopy.c objdump.c prdbg.c \ 137 od-xcoff.c od-macho.c \ 138 rclex.c rdcoff.c rddbg.c readelf.c rename.c \ 139 resbin.c rescoff.c resrc.c resres.c \ 140 size.c srconv.c stabs.c strings.c sysdump.c \ 141 syslex_wrap.c unwind-ia64.c elfedit.c version.c \ 142 windres.c winduni.c wrstabs.c \ 143 windmc.c mclex.c 144 145GENERATED_CFILES = \ 146 arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ 147 defparse.c deflex.c nlmheader.c rcparse.c mcparse.c 148 149DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c 150WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c 151 152# Extra object files for objdump 153OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ 154 155# Code shared by all the binutils. 156BULIBS = bucomm.c version.c filemode.c 157 158# Code shared by the ELF related programs. 159ELFLIBS = elfcomm.c 160 161BFDLIB = ../bfd/libbfd.la 162 163OPCODES = ../opcodes/libopcodes.la 164 165LIBIBERTY = ../libiberty/libiberty.a 166 167POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) 168po/POTFILES.in: @MAINT@ Makefile 169 for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ 170 && mv tmp $(srcdir)/po/POTFILES.in 171 172EXPECT = expect 173RUNTEST = runtest 174 175CC_FOR_TARGET = ` \ 176 if [ -f $$r/../gcc/xgcc ] ; then \ 177 if [ -f $$r/../newlib/Makefile ] ; then \ 178 echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ 179 else \ 180 echo $$r/../gcc/xgcc -B$$r/../gcc/; \ 181 fi; \ 182 else \ 183 if [ "@host@" = "@target@" ] ; then \ 184 echo $(CC); \ 185 else \ 186 echo gcc | sed '$(transform)'; \ 187 fi; \ 188 fi` 189 190check-DEJAGNU: site.exp 191 srcdir=`cd $(srcdir) && pwd`; export srcdir; \ 192 r=`pwd`; export r; \ 193 LC_ALL=C; export LC_ALL; \ 194 EXPECT=$(EXPECT); export EXPECT; \ 195 runtest=$(RUNTEST); \ 196 if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ 197 CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \ 198 CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ 199 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ 200 $(RUNTESTFLAGS); \ 201 else echo "WARNING: could not find \`runtest'" 1>&2; :;\ 202 fi 203 204installcheck-local: 205 /bin/sh $(srcdir)/sanity.sh $(bindir) 206 207# There's no global DEPENDENCIES. So, we must explicitly list everything 208# which depends on libintl, since we don't know whether LIBINTL_DEP will be 209# non-empty until configure time. Ugh! 210size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 211objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES) 212nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 213ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 214strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 215strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 216ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 217cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 218objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 219nlmconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 220srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 221sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 222coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 223dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 224windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 225windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 226addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 227readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 228elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 229dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 230bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 231bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 232 233LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) 234 235size_SOURCES = size.c $(BULIBS) 236 237objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 238 239strings_SOURCES = strings.c $(BULIBS) 240 241readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS) 242readelf_LDADD = $(LIBINTL) $(LIBIBERTY) $(ZLIB) 243 244elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) 245elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) 246 247strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 248 249nm_new_SOURCES = nm.c $(BULIBS) 250 251objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) 252EXTRA_objdump_SOURCES = od-xcoff.c 253objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) 254 255objdump.@OBJEXT@:objdump.c 256if am__fastdepCC 257 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c 258 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 259else 260if AMDEP 261 source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ 262 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 263endif 264 $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c 265endif 266 267cxxfilt_SOURCES = cxxfilt.c $(BULIBS) 268 269ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ 270 emul_$(EMULATION).c $(BULIBS) 271EXTRA_ar_SOURCES = $(CFILES) 272ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 273 274ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ 275 binemul.c emul_$(EMULATION).c $(BULIBS) 276ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 277 278addr2line_SOURCES = addr2line.c $(BULIBS) 279 280# The following is commented out for the conversion to automake. 281# This rule creates a single binary that switches between ar and ranlib 282# by looking at argv[0]. Use this kludge to save some disk space. 283# However, you have to install things by hand. 284# (That is after 'make install', replace the installed ranlib by a link to ar.) 285# Alternatively, you can install ranlib.sh as ranlib. 286# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o 287# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) 288# -rm -f $(RANLIB_PROG) 289# -ln $(AR_PROG) $(RANLIB_PROG) 290# 291# objcopy and strip in one binary that uses argv[0] to decide its action. 292# 293#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o 294# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) 295# -rm -f $(STRIP_PROG) 296# -ln $(OBJCOPY_PROG) $(STRIP_PROG) 297 298sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 299 ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c 300 ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c 301 ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c 302 303sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 304 ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h 305 306sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 307 $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 308 309syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h 310 $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c 311 312sysinfo.@OBJEXT@: sysinfo.c 313 if [ -r sysinfo.c ]; then \ 314 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ 315 else \ 316 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ 317 fi 318 319bin2c$(EXEEXT_FOR_BUILD): bin2c.c 320 $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c 321 322embedspu: embedspu.sh Makefile 323 awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ 324 chmod a+x $@ 325 326# We need these for parallel make. 327sysinfo.h: sysinfo.c 328 329# Disable -Werror, if it has been enabled, since old versions of bison/ 330# yacc will produce working code which contain compile time warnings. 331arparse.@OBJEXT@: arparse.c 332if am__fastdepCC 333 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 334 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 335else 336if AMDEP 337 source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 338 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 339endif 340 $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 341endif 342 343arlex.@OBJEXT@: arlex.c 344if am__fastdepCC 345 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 346 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 347else 348if AMDEP 349 source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 350 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 351endif 352 $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 353endif 354 355sysroff.@OBJEXT@: sysroff.c 356if am__fastdepCC 357 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 358 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 359else 360if AMDEP 361 source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 362 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 363endif 364 $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 365endif 366 367defparse.@OBJEXT@: defparse.c 368if am__fastdepCC 369 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 370 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 371else 372if AMDEP 373 source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 374 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 375endif 376 $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 377endif 378 379deflex.@OBJEXT@: deflex.c 380if am__fastdepCC 381 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 382 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 383else 384if AMDEP 385 source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 386 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 387endif 388 $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 389endif 390 391nlmheader.@OBJEXT@: nlmheader.c 392if am__fastdepCC 393 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR) 394 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 395else 396if AMDEP 397 source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@ 398 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 399endif 400 $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR) 401endif 402 403rcparse.@OBJEXT@: rcparse.c 404if am__fastdepCC 405 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 406 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 407else 408if AMDEP 409 source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 410 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 411endif 412 $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 413endif 414 415mcparse.@OBJEXT@: mcparse.c 416if am__fastdepCC 417 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 418 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 419else 420if AMDEP 421 source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 422 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 423endif 424 $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 425endif 426 427rclex.@OBJEXT@: rclex.c 428if am__fastdepCC 429 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) 430 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 431else 432if AMDEP 433 source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 434 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 435endif 436 $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) 437endif 438 439mclex.@OBJEXT@: mclex.c 440if am__fastdepCC 441 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) 442 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 443else 444if AMDEP 445 source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 446 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 447endif 448 $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) 449endif 450 451srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) 452srconv.@OBJEXT@: sysroff.c 453 454dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) 455dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 456 457dlltool.@OBJEXT@: 458if am__fastdepCC 459 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 460 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 461else 462if AMDEP 463 source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ 464 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 465endif 466 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 467endif 468 469rescoff.@OBJEXT@: 470if am__fastdepCC 471 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 472 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 473else 474if AMDEP 475 source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 476 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 477endif 478 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 479endif 480 481coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) 482 483sysdump_SOURCES = sysdump.c $(BULIBS) 484sysdump.@OBJEXT@: sysroff.c 485 486# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency 487# scripts, since they are only included conditionally. 488nlmconv.@OBJEXT@: nlmconv.c 489if am__fastdepCC 490 ldname=`echo ld | sed '$(transform)'`; \ 491 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \ 492 -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c 493 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 494else 495if AMDEP 496 source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@ 497 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 498endif 499 ldname=`echo ld | sed '$(transform)'`; \ 500 $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c 501endif 502 503nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS) 504 505windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ 506 winduni.c resres.c $(BULIBS) 507windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 508 509windmc_SOURCES = windmc.c mcparse.y mclex.c \ 510 winduni.c $(BULIBS) 511windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 512 513dllwrap_SOURCES = dllwrap.c version.c 514dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) 515 516 517EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \ 518 syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ 519 mcparse.h mcparse.c embedspu.sh 520 521diststuff: $(EXTRA_DIST) info 522all: info 523 524# development.sh is used to determine -Werror default. 525CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh 526 527DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu 528 529MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ 530 binutils.log binutils.sum abcdefgh* 531mostlyclean-local: 532 -rm -rf tmpdir 533 534.PHONY: install-exec-local 535 536install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) 537 @list='$(RENAMED_PROGS)'; for p in $$list; do \ 538 if test -f $$p$(EXEEXT); then \ 539 echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ 540 $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ 541 else :; fi; \ 542 done 543 $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin 544 for i in $(TOOL_PROGS); do \ 545 if [ -f $$i$(EXEEXT) ]; then \ 546 j=`echo $$i | sed -e 's/-new//'`; \ 547 k=`echo $$j | sed '$(transform)'`; \ 548 if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ 549 rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 550 ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ 551 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 552 fi; \ 553 else true; \ 554 fi; \ 555 done 556