1/*
2 * ng_btsocket.c
3 */
4
5/*-
6 * SPDX-License-Identifier: BSD-2-Clause
7 *
8 * Copyright (c) 2001-2002 Maksim Yevmenkin <m_evmenkin@yahoo.com>
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 *    notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 *    notice, this list of conditions and the following disclaimer in the
18 *    documentation and/or other materials provided with the distribution.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 *
32 * $Id: ng_btsocket.c,v 1.4 2003/09/14 23:29:06 max Exp $
33 */
34
35#include <sys/param.h>
36#include <sys/systm.h>
37#include <sys/bitstring.h>
38#include <sys/errno.h>
39#include <sys/domain.h>
40#include <sys/kernel.h>
41#include <sys/lock.h>
42#include <sys/mbuf.h>
43#include <sys/mutex.h>
44#include <sys/protosw.h>
45#include <sys/socket.h>
46#include <sys/socketvar.h>
47#include <sys/sysctl.h>
48#include <sys/taskqueue.h>
49
50#include <net/vnet.h>
51
52#include <netgraph/ng_message.h>
53#include <netgraph/netgraph.h>
54#include <netgraph/bluetooth/include/ng_bluetooth.h>
55#include <netgraph/bluetooth/include/ng_hci.h>
56#include <netgraph/bluetooth/include/ng_l2cap.h>
57#include <netgraph/bluetooth/include/ng_btsocket.h>
58#include <netgraph/bluetooth/include/ng_btsocket_hci_raw.h>
59#include <netgraph/bluetooth/include/ng_btsocket_l2cap.h>
60#include <netgraph/bluetooth/include/ng_btsocket_rfcomm.h>
61#include <netgraph/bluetooth/include/ng_btsocket_sco.h>
62
63static int			ng_btsocket_modevent (module_t, int, void *);
64
65/*
66 * Definitions of protocols supported in the BLUETOOTH domain
67 */
68
69/* Bluetooth raw HCI sockets */
70static struct protosw ng_btsocket_hci_raw_protosw = {
71	.pr_type =		SOCK_RAW,
72	.pr_protocol =		BLUETOOTH_PROTO_HCI,
73	.pr_flags =		PR_ATOMIC|PR_ADDR,
74	.pr_ctloutput =		ng_btsocket_hci_raw_ctloutput,
75	.pr_abort =		ng_btsocket_hci_raw_abort,
76	.pr_attach =		ng_btsocket_hci_raw_attach,
77	.pr_bind =		ng_btsocket_hci_raw_bind,
78	.pr_connect =		ng_btsocket_hci_raw_connect,
79	.pr_control =		ng_btsocket_hci_raw_control,
80	.pr_detach =		ng_btsocket_hci_raw_detach,
81	.pr_disconnect =	ng_btsocket_hci_raw_disconnect,
82	.pr_peeraddr =		ng_btsocket_hci_raw_sockaddr,
83	.pr_send =		ng_btsocket_hci_raw_send,
84	.pr_sockaddr =		ng_btsocket_hci_raw_sockaddr,
85	.pr_close =		ng_btsocket_hci_raw_close,
86};
87
88/* Bluetooth raw L2CAP sockets */
89static struct protosw ng_btsocket_l2cap_raw_protosw = {
90	.pr_type =		SOCK_RAW,
91	.pr_protocol =		BLUETOOTH_PROTO_L2CAP,
92	.pr_flags =		PR_ATOMIC|PR_ADDR,
93	.pr_abort =		ng_btsocket_l2cap_raw_abort,
94	.pr_attach =		ng_btsocket_l2cap_raw_attach,
95	.pr_bind =		ng_btsocket_l2cap_raw_bind,
96	.pr_connect =		ng_btsocket_l2cap_raw_connect,
97	.pr_control =		ng_btsocket_l2cap_raw_control,
98	.pr_detach =		ng_btsocket_l2cap_raw_detach,
99	.pr_disconnect =	ng_btsocket_l2cap_raw_disconnect,
100	.pr_peeraddr =		ng_btsocket_l2cap_raw_peeraddr,
101	.pr_send =		ng_btsocket_l2cap_raw_send,
102	.pr_sockaddr =		ng_btsocket_l2cap_raw_sockaddr,
103	.pr_close =		ng_btsocket_l2cap_raw_close,
104};
105
106/* Bluetooth SEQPACKET L2CAP sockets */
107static struct protosw ng_btsocket_l2cap_protosw = {
108	.pr_type =		SOCK_SEQPACKET,
109	.pr_protocol =		BLUETOOTH_PROTO_L2CAP,
110	.pr_flags =		PR_ATOMIC|PR_CONNREQUIRED,
111	.pr_ctloutput =		ng_btsocket_l2cap_ctloutput,
112	.pr_abort =		ng_btsocket_l2cap_abort,
113	.pr_accept =		ng_btsocket_l2cap_peeraddr,
114	.pr_attach =		ng_btsocket_l2cap_attach,
115	.pr_bind =		ng_btsocket_l2cap_bind,
116	.pr_connect =		ng_btsocket_l2cap_connect,
117	.pr_control =		ng_btsocket_l2cap_control,
118	.pr_detach =		ng_btsocket_l2cap_detach,
119	.pr_disconnect =	ng_btsocket_l2cap_disconnect,
120        .pr_listen =		ng_btsocket_l2cap_listen,
121	.pr_peeraddr =		ng_btsocket_l2cap_peeraddr,
122	.pr_send =		ng_btsocket_l2cap_send,
123	.pr_sockaddr =		ng_btsocket_l2cap_sockaddr,
124	.pr_close =		ng_btsocket_l2cap_close,
125};
126
127/* Bluetooth STREAM RFCOMM sockets */
128static struct protosw ng_btsocket_rfcomm_protosw = {
129	.pr_type =		SOCK_STREAM,
130	.pr_protocol =		BLUETOOTH_PROTO_RFCOMM,
131	.pr_flags =		PR_CONNREQUIRED,
132	.pr_ctloutput =		ng_btsocket_rfcomm_ctloutput,
133	.pr_abort =		ng_btsocket_rfcomm_abort,
134	.pr_accept =		ng_btsocket_rfcomm_peeraddr,
135	.pr_attach =		ng_btsocket_rfcomm_attach,
136	.pr_bind =		ng_btsocket_rfcomm_bind,
137	.pr_connect =		ng_btsocket_rfcomm_connect,
138	.pr_control =		ng_btsocket_rfcomm_control,
139	.pr_detach =		ng_btsocket_rfcomm_detach,
140	.pr_disconnect =	ng_btsocket_rfcomm_disconnect,
141        .pr_listen =		ng_btsocket_rfcomm_listen,
142	.pr_peeraddr =		ng_btsocket_rfcomm_peeraddr,
143	.pr_send =		ng_btsocket_rfcomm_send,
144	.pr_sockaddr =		ng_btsocket_rfcomm_sockaddr,
145	.pr_close =		ng_btsocket_rfcomm_close,
146};
147
148/* Bluetooth SEQPACKET SCO sockets */
149static struct protosw ng_btsocket_sco_protosw = {
150	.pr_type =		SOCK_SEQPACKET,
151	.pr_protocol =		BLUETOOTH_PROTO_SCO,
152	.pr_flags =		PR_ATOMIC|PR_CONNREQUIRED,
153	.pr_ctloutput =		ng_btsocket_sco_ctloutput,
154	.pr_abort =		ng_btsocket_sco_abort,
155	.pr_accept =		ng_btsocket_sco_peeraddr,
156	.pr_attach =		ng_btsocket_sco_attach,
157	.pr_bind =		ng_btsocket_sco_bind,
158	.pr_connect =		ng_btsocket_sco_connect,
159	.pr_control =		ng_btsocket_sco_control,
160	.pr_detach =		ng_btsocket_sco_detach,
161	.pr_disconnect =	ng_btsocket_sco_disconnect,
162	.pr_listen =		ng_btsocket_sco_listen,
163	.pr_peeraddr =		ng_btsocket_sco_peeraddr,
164	.pr_send =		ng_btsocket_sco_send,
165	.pr_sockaddr =		ng_btsocket_sco_sockaddr,
166	.pr_close =		ng_btsocket_sco_close,
167};
168
169/*
170 * BLUETOOTH domain
171 */
172
173static struct domain ng_btsocket_domain = {
174	.dom_family =		AF_BLUETOOTH,
175	.dom_name =		"bluetooth",
176	.dom_nprotosw =		5,
177	.dom_protosw = {
178		&ng_btsocket_hci_raw_protosw,
179		&ng_btsocket_l2cap_raw_protosw,
180		&ng_btsocket_l2cap_protosw,
181		&ng_btsocket_rfcomm_protosw,
182		&ng_btsocket_sco_protosw,
183	},
184};
185
186/*
187 * Socket sysctl tree
188 */
189
190SYSCTL_NODE(_net_bluetooth_hci, OID_AUTO, sockets,
191    CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
192    "Bluetooth HCI sockets family");
193SYSCTL_NODE(_net_bluetooth_l2cap, OID_AUTO, sockets,
194    CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
195    "Bluetooth L2CAP sockets family");
196SYSCTL_NODE(_net_bluetooth_rfcomm, OID_AUTO, sockets,
197    CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
198    "Bluetooth RFCOMM sockets family");
199SYSCTL_NODE(_net_bluetooth_sco, OID_AUTO, sockets,
200    CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
201    "Bluetooth SCO sockets family");
202
203/*
204 * Module
205 */
206
207static moduledata_t	ng_btsocket_mod = {
208	"ng_btsocket",
209	ng_btsocket_modevent,
210	NULL
211};
212
213DECLARE_MODULE(ng_btsocket, ng_btsocket_mod, SI_SUB_PROTO_DOMAIN,
214	SI_ORDER_ANY);
215MODULE_VERSION(ng_btsocket, NG_BLUETOOTH_VERSION);
216MODULE_DEPEND(ng_btsocket, ng_bluetooth, NG_BLUETOOTH_VERSION,
217	NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION);
218MODULE_DEPEND(ng_btsocket, netgraph, NG_ABI_VERSION,
219	NG_ABI_VERSION, NG_ABI_VERSION);
220
221/*
222 * Handle loading and unloading for this node type.
223 * This is to handle auxiliary linkages (e.g protocol domain addition).
224 */
225
226static int
227ng_btsocket_modevent(module_t mod, int event, void *data)
228{
229	int	error = 0;
230
231	switch (event) {
232	case MOD_LOAD:
233		break;
234
235	case MOD_UNLOAD:
236		/* XXX can't unload protocol domain yet */
237		error = EBUSY;
238		break;
239
240	default:
241		error = EOPNOTSUPP;
242		break;
243	}
244
245	return (error);
246} /* ng_btsocket_modevent */
247
248DOMAIN_SET(ng_btsocket_);
249