1/* SPDX-License-Identifier: BSD-3-Clause 2 * Copyright 2008-2017 Cisco Systems, Inc. All rights reserved. 3 * Copyright 2007 Nuova Systems, Inc. All rights reserved. 4 */ 5 6#ifndef _VNIC_DEVCMD_H_ 7#define _VNIC_DEVCMD_H_ 8 9#define _CMD_NBITS 14 10#define _CMD_VTYPEBITS 10 11#define _CMD_FLAGSBITS 6 12#define _CMD_DIRBITS 2 13 14#define _CMD_NMASK ((1 << _CMD_NBITS)-1) 15#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1) 16#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1) 17#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1) 18 19#define _CMD_NSHIFT 0 20#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS) 21#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS) 22#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS) 23 24/* 25 * Direction bits (from host perspective). 26 */ 27#define _CMD_DIR_NONE 0U 28#define _CMD_DIR_WRITE 1U 29#define _CMD_DIR_READ 2U 30#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ) 31 32/* 33 * Flag bits. 34 */ 35#define _CMD_FLAGS_NONE 0U 36#define _CMD_FLAGS_NOWAIT 1U 37 38/* 39 * vNIC type bits. 40 */ 41#define _CMD_VTYPE_NONE 0U 42#define _CMD_VTYPE_ENET 1U 43#define _CMD_VTYPE_FC 2U 44#define _CMD_VTYPE_SCSI 4U 45#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI) 46 47/* 48 * Used to create cmds.. 49 */ 50#define _CMDCF(dir, flags, vtype, nr) \ 51 (((dir) << _CMD_DIRSHIFT) | \ 52 ((flags) << _CMD_FLAGSSHIFT) | \ 53 ((vtype) << _CMD_VTYPESHIFT) | \ 54 ((nr) << _CMD_NSHIFT)) 55#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr) 56#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr) 57 58/* 59 * Used to decode cmds.. 60 */ 61#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK) 62#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK) 63#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK) 64#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK) 65 66#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) 67 68enum vnic_devcmd_cmd { 69 CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0), 70 71 /* 72 * mcpu fw info in mem: 73 * in: 74 * (u64)a0=paddr to struct vnic_devcmd_fw_info 75 * action: 76 * Fills in struct vnic_devcmd_fw_info (128 bytes) 77 * note: 78 * An old definition of CMD_MCPU_FW_INFO 79 */ 80 CMD_MCPU_FW_INFO_OLD = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1), 81 82 /* 83 * mcpu fw info in mem: 84 * in: 85 * (u64)a0=paddr to struct vnic_devcmd_fw_info 86 * (u16)a1=size of the structure 87 * out: 88 * (u16)a1=0 for in:a1 = 0, 89 * data size actually written for other values. 90 * action: 91 * Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0, 92 * first in:a1 bytes for 0 < in:a1 <= 132, 93 * 132 bytes for other values of in:a1. 94 * note: 95 * CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1 96 * for source compatibility. 97 */ 98 CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1), 99 100 /* dev-specific block member: 101 * in: (u16)a0=offset,(u8)a1=size 102 * out: a0=value 103 */ 104 CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2), 105 106 /* stats clear */ 107 CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3), 108 109 /* stats dump in mem: (u64)a0=paddr to stats area, 110 * (u16)a1=sizeof stats area */ 111 CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4), 112 113 /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */ 114 CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7), 115 116 /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */ 117 CMD_PACKET_FILTER_ALL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7), 118 119 /* hang detection notification */ 120 CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8), 121 122 /* MAC address in (u48)a0 */ 123 CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ, 124 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9), 125#define CMD_GET_MAC_ADDR CMD_MAC_ADDR /* some uses are aliased */ 126 127 /* add addr from (u48)a0 */ 128 CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE, 129 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12), 130 131 /* del addr from (u48)a0 */ 132 CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE, 133 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13), 134 135 /* add VLAN id in (u16)a0 */ 136 CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14), 137 138 /* del VLAN id in (u16)a0 */ 139 CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15), 140 141 /* 142 * nic_cfg in (u32)a0 143 * 144 * Capability query: 145 * out: (u64) a0= 1 if a1 is valid 146 * (u64) a1= (NIC_CFG bits supported) | (flags << 32) 147 * (flags are CMD_NIC_CFG_CAPF_xxx) 148 */ 149 CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), 150 151 /* 152 * nic_cfg_chk (same as nic_cfg, but may return error) 153 * in (u32)a0 154 * 155 * Capability query: 156 * out: (u64) a0= 1 if a1 is valid 157 * (u64) a1= (NIC_CFG bits supported) | (flags << 32) 158 * (flags are CMD_NIC_CFG_CAPF_xxx) 159 */ 160 CMD_NIC_CFG_CHK = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), 161 162 /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */ 163 CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17), 164 165 /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */ 166 CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18), 167 168 /* initiate softreset */ 169 CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19), 170 171 /* softreset status: 172 * out: a0=0 reset complete, a0=1 reset in progress */ 173 CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20), 174 175 /* set struct vnic_devcmd_notify buffer in mem: 176 * in: 177 * (u64)a0=paddr to notify (set paddr=0 to unset) 178 * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) 179 * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) 180 * out: 181 * (u32)a1 = effective size 182 */ 183 CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21), 184 185 /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct, 186 * (u8)a1=PXENV_UNDI_xxx */ 187 CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22), 188 189 /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */ 190 CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23), 191 192 /* open status: 193 * out: a0=0 open complete, a0=1 open in progress */ 194 CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24), 195 196 /* close vnic */ 197 CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25), 198 199 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ 200/***** Replaced by CMD_INIT *****/ 201 CMD_INIT_v1 = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26), 202 203 /* variant of CMD_INIT, with provisioning info 204 * (u64)a0=paddr of vnic_devcmd_provinfo 205 * (u32)a1=sizeof provision info */ 206 CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), 207 208 /* enable virtual link */ 209 CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), 210 211 /* enable virtual link, waiting variant. */ 212 CMD_ENABLE_WAIT = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), 213 214 /* disable virtual link */ 215 CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29), 216 217 /* stats dump sum of all vnic stats on same uplink in mem: 218 * (u64)a0=paddr 219 * (u16)a1=sizeof stats area */ 220 CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30), 221 222 /* init status: 223 * out: a0=0 init complete, a0=1 init in progress 224 * if a0=0, a1=errno */ 225 CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31), 226 227 /* INT13 API: (u64)a0=paddr to vnic_int13_params struct 228 * (u32)a1=INT13_CMD_xxx */ 229 CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32), 230 231 /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */ 232 CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33), 233 234 /* undo initialize of virtual link */ 235 CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34), 236 237 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ 238 CMD_INIT = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35), 239 240 /* check fw capability of a cmd: 241 * in: (u32)a0=cmd 242 * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */ 243 CMD_CAPABILITY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36), 244 245 /* persistent binding info 246 * in: (u64)a0=paddr of arg 247 * (u32)a1=CMD_PERBI_XXX */ 248 CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37), 249 250 /* Interrupt Assert Register functionality 251 * in: (u16)a0=interrupt number to assert 252 */ 253 CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38), 254 255 /* initiate hangreset, like softreset after hang detected */ 256 CMD_HANG_RESET = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39), 257 258 /* hangreset status: 259 * out: a0=0 reset complete, a0=1 reset in progress */ 260 CMD_HANG_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40), 261 262 /* 263 * Set hw ingress packet vlan rewrite mode: 264 * in: (u32)a0=new vlan rewrite mode 265 * out: (u32)a0=old vlan rewrite mode */ 266 CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41), 267 268 /* 269 * in: (u16)a0=bdf of target vnic 270 * (u32)a1=cmd to proxy 271 * a2-a15=args to cmd in a1 272 * out: (u32)a0=status of proxied cmd 273 * a1-a15=out args of proxied cmd */ 274 CMD_PROXY_BY_BDF = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42), 275 276 /* 277 * As for BY_BDF except a0 is index of hvnlink subordinate vnic 278 * or SR-IOV virtual vnic 279 */ 280 CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43), 281 282 /* 283 * For HPP toggle: 284 * adapter-info-get 285 * in: (u64)a0=phsical address of buffer passed in from caller. 286 * (u16)a1=size of buffer specified in a0. 287 * out: (u64)a0=phsical address of buffer passed in from caller. 288 * (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or 289 * 0 if no VIF-CONFIG-INFO TLV was ever received. */ 290 CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44), 291 292 /* 293 * INT13 API: (u64)a0=paddr to vnic_int13_params struct 294 * (u32)a1=INT13_CMD_xxx 295 */ 296 CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45), 297 298 /* 299 * Set default vlan: 300 * in: (u16)a0=new default vlan 301 * (u16)a1=zero for overriding vlan with param a0, 302 * non-zero for resetting vlan to the default 303 * out: (u16)a0=old default vlan 304 */ 305 CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46), 306 307 /* init_prov_info2: 308 * Variant of CMD_INIT_PROV_INFO, where it will not try to enable 309 * the vnic until CMD_ENABLE2 is issued. 310 * (u64)a0=paddr of vnic_devcmd_provinfo 311 * (u32)a1=sizeof provision info */ 312 CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47), 313 314 /* enable2: 315 * (u32)a0=0 ==> standby 316 * =CMD_ENABLE2_ACTIVE ==> active 317 */ 318 CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48), 319 320 /* 321 * cmd_status: 322 * Returns the status of the specified command 323 * Input: 324 * a0 = command for which status is being queried. 325 * Possible values are: 326 * CMD_SOFT_RESET 327 * CMD_HANG_RESET 328 * CMD_OPEN 329 * CMD_INIT 330 * CMD_INIT_PROV_INFO 331 * CMD_DEINIT 332 * CMD_INIT_PROV_INFO2 333 * CMD_ENABLE2 334 * Output: 335 * if status == STAT_ERROR 336 * a0 = ERR_ENOTSUPPORTED - status for command in a0 is 337 * not supported 338 * if status == STAT_NONE 339 * a0 = status of the devcmd specified in a0 as follows. 340 * ERR_SUCCESS - command in a0 completed successfully 341 * ERR_EINPROGRESS - command in a0 is still in progress 342 */ 343 CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49), 344 345 /* 346 * Returns interrupt coalescing timer conversion factors. 347 * After calling this devcmd, ENIC driver can convert 348 * interrupt coalescing timer in usec into CPU cycles as follows: 349 * 350 * intr_timer_cycles = intr_timer_usec * multiplier / divisor 351 * 352 * Interrupt coalescing timer in usecs can be be converted/obtained 353 * from CPU cycles as follows: 354 * 355 * intr_timer_usec = intr_timer_cycles * divisor / multiplier 356 * 357 * in: none 358 * out: (u32)a0 = multiplier 359 * (u32)a1 = divisor 360 * (u32)a2 = maximum timer value in usec 361 */ 362 CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50), 363 364 /* 365 * ISCSI DUMP API: 366 * in: (u64)a0=paddr of the param or param itself 367 * (u32)a1=ISCSI_CMD_xxx 368 */ 369 CMD_ISCSI_DUMP_REQ = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 51), 370 371 /* 372 * ISCSI DUMP STATUS API: 373 * in: (u32)a0=cmd tag 374 * in: (u32)a1=ISCSI_CMD_xxx 375 * out: (u32)a0=cmd status 376 */ 377 CMD_ISCSI_DUMP_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 52), 378 379 /* 380 * Subvnic migration from MQ <--> VF. 381 * Enable the LIF migration from MQ to VF and vice versa. MQ and VF 382 * indexes are statically bound at the time of initialization. 383 * Based on the direction of migration, the resources of either MQ or 384 * the VF shall be attached to the LIF. 385 * in: (u32)a0=Direction of Migration 386 * 0=> Migrate to VF 387 * 1=> Migrate to MQ 388 * (u32)a1=VF index (MQ index) 389 */ 390 CMD_MIGRATE_SUBVNIC = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 53), 391 392 /* 393 * Register / Deregister the notification block for MQ subvnics 394 * in: 395 * (u64)a0=paddr to notify (set paddr=0 to unset) 396 * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) 397 * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) 398 * out: 399 * (u32)a1 = effective size 400 */ 401 CMD_SUBVNIC_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 54), 402 403 /* 404 * Set the predefined mac address as default 405 * in: 406 * (u48)a0=mac addr 407 */ 408 CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55), 409 410 /* Update the provisioning info of the given VIF 411 * (u64)a0=paddr of vnic_devcmd_provinfo 412 * (u32)a1=sizeof provision info */ 413 CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56), 414 415 /* 416 * Initialization for the devcmd2 interface. 417 * in: (u64) a0=host result buffer physical address 418 * in: (u16) a1=number of entries in result buffer 419 */ 420 CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57), 421 422 /* 423 * Add a filter. 424 * in: (u64) a0= filter address 425 * (u32) a1= size of filter 426 * out: (u32) a0=filter identifier 427 * 428 * Capability query: 429 * out: (u64) a0= 1 if capability query supported 430 * (u64) a1= MAX filter type supported 431 */ 432 CMD_ADD_FILTER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 58), 433 434 /* 435 * Delete a filter. 436 * in: (u32) a0=filter identifier 437 */ 438 CMD_DEL_FILTER = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 59), 439 440 /* 441 * Enable a Queue Pair in User space NIC 442 * in: (u32) a0=Queue Pair number 443 * (u32) a1= command 444 */ 445 CMD_QP_ENABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 60), 446 447 /* 448 * Disable a Queue Pair in User space NIC 449 * in: (u32) a0=Queue Pair number 450 * (u32) a1= command 451 */ 452 CMD_QP_DISABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 61), 453 454 /* 455 * Stats dump Queue Pair in User space NIC 456 * in: (u32) a0=Queue Pair number 457 * (u64) a1=host buffer addr for status dump 458 * (u32) a2=length of the buffer 459 */ 460 CMD_QP_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 62), 461 462 /* 463 * Clear stats for Queue Pair in User space NIC 464 * in: (u32) a0=Queue Pair number 465 */ 466 CMD_QP_STATS_CLEAR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 63), 467 468 /* 469 * UEFI BOOT API: (u64)a0= UEFI FLS_CMD_xxx 470 * (ui64)a1= paddr for the info buffer 471 */ 472 CMD_FC_REQ = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 64), 473 474 /* 475 * Return the iSCSI config details required by the EFI Option ROM 476 * in: (u32) a0=0 Get Boot Info for PXE eNIC as per pxe_boot_config_t 477 * a0=1 Get Boot info for iSCSI enic as per 478 * iscsi_boot_efi_cfg_t 479 * in: (u64) a1=Host address where iSCSI config info is returned 480 */ 481 CMD_VNIC_BOOT_CONFIG_INFO = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 65), 482 483 /* 484 * Create a Queue Pair (RoCE) 485 * in: (u32) a0 = Queue Pair number 486 * (u32) a1 = Remote QP 487 * (u32) a2 = RDMA-RQ 488 * (u16) a3 = RQ Res Group 489 * (u16) a4 = SQ Res Group 490 * (u32) a5 = Protection Domain 491 * (u64) a6 = Remote MAC 492 * (u32) a7 = start PSN 493 * (u16) a8 = MSS 494 * (u32) a9 = protocol version 495 */ 496 CMD_RDMA_QP_CREATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 66), 497 498 /* 499 * Delete a Queue Pair (RoCE) 500 * in: (u32) a0 = Queue Pair number 501 */ 502 CMD_RDMA_QP_DELETE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 67), 503 504 /* 505 * Retrieve a Queue Pair's status information (RoCE) 506 * in: (u32) a0 = Queue Pair number 507 * (u64) a1 = host buffer addr for QP status struct 508 * (u32) a2 = length of the buffer 509 */ 510 CMD_RDMA_QP_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 68), 511 512 /* 513 * Use this devcmd for agreeing on the highest common version supported 514 * by both driver and fw for by features who need such a facility. 515 * in: (u64) a0 = feature (driver requests for the supported versions 516 * on this feature) 517 * out: (u64) a0 = bitmap of all supported versions for that feature 518 */ 519 CMD_GET_SUPP_FEATURE_VER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 69), 520 521 /* 522 * Initialize the RDMA notification work queue 523 * in: (u64) a0 = host buffer address 524 * in: (u16) a1 = number of entries in buffer 525 * in: (u16) a2 = resource group number 526 * in: (u16) a3 = CQ number to post completion 527 */ 528 CMD_RDMA_INIT_INFO_BUF = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 70), 529 530 /* 531 * De-init the RDMA notification work queue 532 * in: (u64) a0=resource group number 533 */ 534 CMD_RDMA_DEINIT_INFO_BUF = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 71), 535 536 /* 537 * Control (Enable/Disable) overlay offloads on the given vnic 538 * in: (u8) a0 = OVERLAY_FEATURE_NVGRE : NVGRE 539 * a0 = OVERLAY_FEATURE_VXLAN : VxLAN 540 * in: (u8) a1 = OVERLAY_OFFLOAD_ENABLE : Enable or 541 * a1 = OVERLAY_OFFLOAD_DISABLE : Disable or 542 * a1 = OVERLAY_OFFLOAD_ENABLE_V2 : Enable with version 2 543 */ 544 CMD_OVERLAY_OFFLOAD_CTRL = 545 _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 72), 546 547 /* 548 * Configuration of overlay offloads feature on a given vNIC 549 * in: (u8) a0 = OVERLAY_CFG_VXLAN_PORT_UPDATE : VxLAN 550 * in: (u16) a1 = unsigned short int port information 551 */ 552 CMD_OVERLAY_OFFLOAD_CFG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 73), 553 554 /* 555 * Return the configured name for the device 556 * in: (u64) a0=Host address where the name is copied 557 * (u32) a1=Size of the buffer 558 */ 559 CMD_GET_CONFIG_NAME = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 74), 560 561 /* 562 * Enable group interrupt for the VF 563 * in: (u32) a0 = GRPINTR_ENABLE : enable 564 * a0 = GRPINTR_DISABLE : disable 565 * a0 = GRPINTR_UPD_VECT: update group vector addr 566 * in: (u32) a1 = interrupt group count 567 * in: (u64) a2 = Start of host buffer address for DMAing group 568 * vector bitmap 569 * in: (u64) a3 = Stride between group vectors 570 */ 571 CMD_CONFIG_GRPINTR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 75), 572 573 /* 574 * Set cq arrary base and size in a list of consective wqs and 575 * rqs for a device 576 * in: (u16) a0 = the wq relative index in the device. 577 * -1 indicates skipping wq configuration 578 * in: (u16) a1 = the wcq relative index in the device 579 * in: (u16) a2 = the rq relative index in the device 580 * -1 indicates skipping rq configuration 581 * in: (u16) a3 = the rcq relative index in the device 582 */ 583 CMD_CONFIG_CQ_ARRAY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 76), 584 585 /* 586 * Add an advanced filter. 587 * in: (u64) a0= filter address 588 * (u32) a1= size of filter 589 * out: (u32) a0=filter identifier 590 * 591 * Capability query: 592 * in: (u64) a1= supported filter capability exchange modes 593 * out: (u64) a0= 1 if capability query supported 594 * if (u64) a1 = 0: a1 = MAX filter type supported 595 * if (u64) a1 & FILTER_CAP_MODE_V1_FLAG: 596 * a1 = bitmask of supported filters 597 * a2 = FILTER_CAP_MODE_V1 598 * a3 = bitmask of supported actions 599 */ 600 CMD_ADD_ADV_FILTER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 77), 601 602 /* 603 * Allocate a counter for use with CMD_ADD_FILTER 604 * out:(u32) a0 = counter index 605 */ 606 CMD_COUNTER_ALLOC = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ENET, 85), 607 608 /* 609 * Free a counter 610 * in: (u32) a0 = counter_id 611 */ 612 CMD_COUNTER_FREE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 86), 613 614 /* 615 * Read a counter 616 * in: (u32) a0 = counter_id 617 * (u32) a1 = clear counter if non-zero 618 * out:(u64) a0 = packet count 619 * (u64) a1 = byte count 620 */ 621 CMD_COUNTER_QUERY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 87), 622 623 /* 624 * Configure periodic counter DMA. This will trigger an immediate 625 * DMA of the counters (unless period == 0), and then schedule a DMA 626 * of the counters every <period> seconds until disdabled. 627 * Each new COUNTER_DMA_CONFIG will override all previous commands on 628 * this vnic. 629 * Setting a2 (period) = 0 will disable periodic DMAs 630 * If a0 (num_counters) != 0, an immediate DMA will always be done, 631 * irrespective of the value in a2. 632 * in: (u32) a0 = number of counters to DMA 633 * (u64) a1 = host target DMA address 634 * (u32) a2 = DMA period in milliseconds (0 to disable) 635 */ 636 CMD_COUNTER_DMA_CONFIG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 88), 637#define VNIC_COUNTER_DMA_MIN_PERIOD 500 638 639 /* 640 * Clear all counters on a vnic 641 */ 642 CMD_COUNTER_CLEAR_ALL = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ENET, 89), 643}; 644 645/* Modes for exchanging advanced filter capabilities. The modes supported by 646 * the driver are passed in the CMD_ADD_ADV_FILTER capability command and the 647 * mode selected is returned. 648 * V0: the maximum filter type supported is returned 649 * V1: bitmasks of supported filters and actions are returned 650 */ 651enum filter_cap_mode { 652 FILTER_CAP_MODE_V0 = 0, /* Must always be 0 for legacy drivers */ 653 FILTER_CAP_MODE_V1 = 1, 654}; 655#define FILTER_CAP_MODE_V1_FLAG (1 << FILTER_CAP_MODE_V1) 656 657/* CMD_ENABLE2 flags */ 658#define CMD_ENABLE2_STANDBY 0x0 659#define CMD_ENABLE2_ACTIVE 0x1 660 661/* flags for CMD_OPEN */ 662#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ 663#define CMD_OPENF_IG_DESCCACHE 0x2 /* Do not flush IG DESC cache */ 664 665/* flags for CMD_INIT */ 666#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ 667 668/* flags for CMD_NIC_CFG */ 669#define CMD_NIC_CFG_CAPF_UDP_WEAK (1ULL << 0) /* Bodega-style UDP RSS */ 670 671/* flags for CMD_PACKET_FILTER */ 672#define CMD_PFILTER_DIRECTED 0x01 673#define CMD_PFILTER_MULTICAST 0x02 674#define CMD_PFILTER_BROADCAST 0x04 675#define CMD_PFILTER_PROMISCUOUS 0x08 676#define CMD_PFILTER_ALL_MULTICAST 0x10 677 678/* Commands for CMD_QP_ENABLE/CM_QP_DISABLE */ 679#define CMD_QP_RQWQ 0x0 680 681/* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */ 682#define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK 0 683#define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN 1 684#define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN 2 685#define IG_VLAN_REWRITE_MODE_PASS_THRU 3 686 687enum vnic_devcmd_status { 688 STAT_NONE = 0, 689 STAT_BUSY = 1 << 0, /* cmd in progress */ 690 STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */ 691 STAT_FAILOVER = 1 << 2, /* always set on vnics in pci standby state 692 * if seen a failover to the standby happened 693 */ 694}; 695 696enum vnic_devcmd_error { 697 ERR_SUCCESS = 0, 698 ERR_EINVAL = 1, 699 ERR_EFAULT = 2, 700 ERR_EPERM = 3, 701 ERR_EBUSY = 4, 702 ERR_ECMDUNKNOWN = 5, 703 ERR_EBADSTATE = 6, 704 ERR_ENOMEM = 7, 705 ERR_ETIMEDOUT = 8, 706 ERR_ELINKDOWN = 9, 707 ERR_EMAXRES = 10, 708 ERR_ENOTSUPPORTED = 11, 709 ERR_EINPROGRESS = 12, 710 ERR_MAX 711}; 712 713/* 714 * note: hw_version and asic_rev refer to the same thing, 715 * but have different formats. hw_version is 716 * a 32-byte string (e.g. "A2") and asic_rev is 717 * a 16-bit integer (e.g. 0xA2). 718 */ 719struct vnic_devcmd_fw_info { 720 char fw_version[32]; 721 char fw_build[32]; 722 char hw_version[32]; 723 char hw_serial_number[32]; 724 u16 asic_type; 725 u16 asic_rev; 726}; 727 728enum fwinfo_asic_type { 729 FWINFO_ASIC_TYPE_UNKNOWN, 730 FWINFO_ASIC_TYPE_PALO, 731 FWINFO_ASIC_TYPE_SERENO, 732 FWINFO_ASIC_TYPE_CRUZ, 733}; 734 735struct vnic_devcmd_notify { 736 u32 csum; /* checksum over following words */ 737 738 u32 link_state; /* link up == 1 */ 739 u32 port_speed; /* effective port speed (rate limit) */ 740 u32 mtu; /* MTU */ 741 u32 msglvl; /* requested driver msg lvl */ 742 u32 uif; /* uplink interface */ 743 u32 status; /* status bits (see VNIC_STF_*) */ 744 u32 error; /* error code (see ERR_*) for first ERR */ 745 u32 link_down_cnt; /* running count of link down transitions */ 746 u32 perbi_rebuild_cnt; /* running count of perbi rebuilds */ 747}; 748#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */ 749#define VNIC_STF_STD_PAUSE 0x0002 /* standard link-level pause on */ 750#define VNIC_STF_PFC_PAUSE 0x0004 /* priority flow control pause on */ 751/* all supported status flags */ 752#define VNIC_STF_ALL (VNIC_STF_FATAL_ERR |\ 753 VNIC_STF_STD_PAUSE |\ 754 VNIC_STF_PFC_PAUSE |\ 755 0) 756 757struct vnic_devcmd_provinfo { 758 u8 oui[3]; 759 u8 type; 760 u8 data[0]; 761}; 762 763/* 764 * These are used in flags field of different filters to denote 765 * valid fields used. 766 */ 767#define FILTER_FIELD_VALID(fld) (1 << (fld - 1)) 768 769#define FILTER_FIELD_USNIC_VLAN FILTER_FIELD_VALID(1) 770#define FILTER_FIELD_USNIC_ETHTYPE FILTER_FIELD_VALID(2) 771#define FILTER_FIELD_USNIC_PROTO FILTER_FIELD_VALID(3) 772#define FILTER_FIELD_USNIC_ID FILTER_FIELD_VALID(4) 773 774#define FILTER_FIELDS_USNIC (FILTER_FIELD_USNIC_VLAN | \ 775 FILTER_FIELD_USNIC_ETHTYPE | \ 776 FILTER_FIELD_USNIC_PROTO | \ 777 FILTER_FIELD_USNIC_ID) 778 779struct filter_usnic_id { 780 u32 flags; 781 u16 vlan; 782 u16 ethtype; 783 u8 proto_version; 784 u32 usnic_id; 785} __attribute__((packed)); 786 787#define FILTER_FIELD_5TUP_PROTO FILTER_FIELD_VALID(1) 788#define FILTER_FIELD_5TUP_SRC_AD FILTER_FIELD_VALID(2) 789#define FILTER_FIELD_5TUP_DST_AD FILTER_FIELD_VALID(3) 790#define FILTER_FIELD_5TUP_SRC_PT FILTER_FIELD_VALID(4) 791#define FILTER_FIELD_5TUP_DST_PT FILTER_FIELD_VALID(5) 792 793#define FILTER_FIELDS_IPV4_5TUPLE (FILTER_FIELD_5TUP_PROTO | \ 794 FILTER_FIELD_5TUP_SRC_AD | \ 795 FILTER_FIELD_5TUP_DST_AD | \ 796 FILTER_FIELD_5TUP_SRC_PT | \ 797 FILTER_FIELD_5TUP_DST_PT) 798 799/* Enums for the protocol field. */ 800enum protocol_e { 801 PROTO_UDP = 0, 802 PROTO_TCP = 1, 803 PROTO_IPV4 = 2, 804 PROTO_IPV6 = 3 805}; 806 807struct filter_ipv4_5tuple { 808 u32 flags; 809 u32 protocol; 810 u32 src_addr; 811 u32 dst_addr; 812 u16 src_port; 813 u16 dst_port; 814} __attribute__((packed)); 815 816#define FILTER_FIELD_VMQ_VLAN FILTER_FIELD_VALID(1) 817#define FILTER_FIELD_VMQ_MAC FILTER_FIELD_VALID(2) 818 819#define FILTER_FIELDS_MAC_VLAN (FILTER_FIELD_VMQ_VLAN | \ 820 FILTER_FIELD_VMQ_MAC) 821 822#define FILTER_FIELDS_NVGRE FILTER_FIELD_VMQ_MAC 823 824struct filter_mac_vlan { 825 u32 flags; 826 u16 vlan; 827 u8 mac_addr[6]; 828} __attribute__((packed)); 829 830#define FILTER_FIELD_VLAN_IP_3TUP_VLAN FILTER_FIELD_VALID(1) 831#define FILTER_FIELD_VLAN_IP_3TUP_L3_PROTO FILTER_FIELD_VALID(2) 832#define FILTER_FIELD_VLAN_IP_3TUP_DST_AD FILTER_FIELD_VALID(3) 833#define FILTER_FIELD_VLAN_IP_3TUP_L4_PROTO FILTER_FIELD_VALID(4) 834#define FILTER_FIELD_VLAN_IP_3TUP_DST_PT FILTER_FIELD_VALID(5) 835 836#define FILTER_FIELDS_VLAN_IP_3TUP (FILTER_FIELD_VLAN_IP_3TUP_VLAN | \ 837 FILTER_FIELD_VLAN_IP_3TUP_L3_PROTO | \ 838 FILTER_FIELD_VLAN_IP_3TUP_DST_AD | \ 839 FILTER_FIELD_VLAN_IP_3TUP_L4_PROTO | \ 840 FILTER_FIELD_VLAN_IP_3TUP_DST_PT) 841 842struct filter_vlan_ip_3tuple { 843 u32 flags; 844 u16 vlan; 845 u16 l3_protocol; 846 union { 847 u32 dst_addr_v4; 848 u8 dst_addr_v6[16]; 849 } u; 850 u32 l4_protocol; 851 u16 dst_port; 852} __attribute__((packed)); 853 854#define FILTER_GENERIC_1_BYTES 64 855 856enum filter_generic_1_layer { 857 FILTER_GENERIC_1_L2, 858 FILTER_GENERIC_1_L3, 859 FILTER_GENERIC_1_L4, 860 FILTER_GENERIC_1_L5, 861 FILTER_GENERIC_1_NUM_LAYERS 862}; 863 864#define FILTER_GENERIC_1_IPV4 (1 << 0) 865#define FILTER_GENERIC_1_IPV6 (1 << 1) 866#define FILTER_GENERIC_1_UDP (1 << 2) 867#define FILTER_GENERIC_1_TCP (1 << 3) 868#define FILTER_GENERIC_1_TCP_OR_UDP (1 << 4) 869#define FILTER_GENERIC_1_IP4SUM_OK (1 << 5) 870#define FILTER_GENERIC_1_L4SUM_OK (1 << 6) 871#define FILTER_GENERIC_1_IPFRAG (1 << 7) 872 873#define FILTER_GENERIC_1_KEY_LEN 64 874 875/* 876 * Version 1 of generic filter specification 877 * position is only 16 bits, reserving positions > 64k to be used by firmware 878 */ 879struct filter_generic_1 { 880 u16 position; /* lower position comes first */ 881 u32 mask_flags; 882 u32 val_flags; 883 u16 mask_vlan; 884 u16 val_vlan; 885 struct { 886 u8 mask[FILTER_GENERIC_1_KEY_LEN]; /* 0 bit means "don't care"*/ 887 u8 val[FILTER_GENERIC_1_KEY_LEN]; 888 } __attribute__((packed)) layer[FILTER_GENERIC_1_NUM_LAYERS]; 889} __attribute__((packed)); 890 891/* Specifies the filter_action type. */ 892enum { 893 FILTER_ACTION_RQ_STEERING = 0, 894 FILTER_ACTION_V2 = 1, 895 FILTER_ACTION_MAX 896}; 897 898struct filter_action { 899 u32 type; 900 union { 901 u32 rq_idx; 902 } u; 903} __attribute__((packed)); 904 905#define FILTER_ACTION_RQ_STEERING_FLAG (1 << 0) 906#define FILTER_ACTION_FILTER_ID_FLAG (1 << 1) 907#define FILTER_ACTION_DROP_FLAG (1 << 2) 908#define FILTER_ACTION_COUNTER_FLAG (1 << 3) 909#define FILTER_ACTION_V2_ALL (FILTER_ACTION_RQ_STEERING_FLAG \ 910 | FILTER_ACTION_FILTER_ID_FLAG \ 911 | FILTER_ACTION_DROP_FLAG \ 912 | FILTER_ACTION_COUNTER_FLAG) 913 914/* Version 2 of filter action must be a strict extension of struct filter_action 915 * where the first fields exactly match in size and meaning. 916 */ 917struct filter_action_v2 { 918 u32 type; 919 u32 rq_idx; 920 u32 flags; /* use FILTER_ACTION_XXX_FLAG defines */ 921 u16 filter_id; 922 u32 counter_index; 923 uint8_t reserved[28]; /* for future expansion */ 924} __attribute__((packed)); 925 926/* Specifies the filter type. */ 927enum filter_type { 928 FILTER_USNIC_ID = 0, 929 FILTER_IPV4_5TUPLE = 1, 930 FILTER_MAC_VLAN = 2, 931 FILTER_VLAN_IP_3TUPLE = 3, 932 FILTER_NVGRE_VMQ = 4, 933 FILTER_USNIC_IP = 5, 934 FILTER_DPDK_1 = 6, 935 FILTER_MAX 936}; 937 938#define FILTER_USNIC_ID_FLAG (1 << FILTER_USNIC_ID) 939#define FILTER_IPV4_5TUPLE_FLAG (1 << FILTER_IPV4_5TUPLE) 940#define FILTER_MAC_VLAN_FLAG (1 << FILTER_MAC_VLAN) 941#define FILTER_VLAN_IP_3TUPLE_FLAG (1 << FILTER_VLAN_IP_3TUPLE) 942#define FILTER_NVGRE_VMQ_FLAG (1 << FILTER_NVGRE_VMQ) 943#define FILTER_USNIC_IP_FLAG (1 << FILTER_USNIC_IP) 944#define FILTER_DPDK_1_FLAG (1 << FILTER_DPDK_1) 945#define FILTER_V1_ALL (FILTER_USNIC_ID_FLAG | \ 946 FILTER_IPV4_5TUPLE_FLAG | \ 947 FILTER_MAC_VLAN_FLAG | \ 948 FILTER_VLAN_IP_3TUPLE_FLAG | \ 949 FILTER_NVGRE_VMQ_FLAG | \ 950 FILTER_USNIC_IP_FLAG | \ 951 FILTER_DPDK_1_FLAG) 952 953struct filter { 954 u32 type; 955 union { 956 struct filter_usnic_id usnic; 957 struct filter_ipv4_5tuple ipv4; 958 struct filter_mac_vlan mac_vlan; 959 struct filter_vlan_ip_3tuple vlan_3tuple; 960 } u; 961} __attribute__((packed)); 962 963/* 964 * This is a strict superset of "struct filter" and exists only 965 * because many drivers use "sizeof (struct filter)" in deciding TLV size. 966 * This new, larger struct filter would cause any code that uses that method 967 * to not work with older firmware, so we add filter_v2 to hold the 968 * new filter types. Drivers should use vnic_filter_size() to determine 969 * the TLV size instead of sizeof (struct fiter_v2) to guard against future 970 * growth. 971 */ 972struct filter_v2 { 973 u32 type; 974 union { 975 struct filter_usnic_id usnic; 976 struct filter_ipv4_5tuple ipv4; 977 struct filter_mac_vlan mac_vlan; 978 struct filter_vlan_ip_3tuple vlan_3tuple; 979 struct filter_generic_1 generic_1; 980 } u; 981} __attribute__((packed)); 982 983enum { 984 CLSF_TLV_FILTER = 0, 985 CLSF_TLV_ACTION = 1, 986}; 987 988struct filter_tlv { 989 uint32_t type; 990 uint32_t length; 991 uint32_t val[0]; 992}; 993 994/* Data for CMD_ADD_FILTER is 2 TLV and filter + action structs */ 995#define FILTER_MAX_BUF_SIZE 100 996#define FILTER_V2_MAX_BUF_SIZE (sizeof(struct filter_v2) + \ 997 sizeof(struct filter_action_v2) + \ 998 (2 * sizeof(struct filter_tlv))) 999 1000/* 1001 * Compute actual structure size given filter type. To be "future-proof," 1002 * drivers should use this instead of "sizeof (struct filter_v2)" when 1003 * computing length for TLV. 1004 */ 1005static inline uint32_t 1006vnic_filter_size(struct filter_v2 *fp) 1007{ 1008 uint32_t size; 1009 1010 switch (fp->type) { 1011 case FILTER_USNIC_ID: 1012 size = sizeof(fp->u.usnic); 1013 break; 1014 case FILTER_IPV4_5TUPLE: 1015 size = sizeof(fp->u.ipv4); 1016 break; 1017 case FILTER_MAC_VLAN: 1018 case FILTER_NVGRE_VMQ: 1019 size = sizeof(fp->u.mac_vlan); 1020 break; 1021 case FILTER_VLAN_IP_3TUPLE: 1022 size = sizeof(fp->u.vlan_3tuple); 1023 break; 1024 case FILTER_USNIC_IP: 1025 case FILTER_DPDK_1: 1026 size = sizeof(fp->u.generic_1); 1027 break; 1028 default: 1029 size = sizeof(fp->u); 1030 break; 1031 } 1032 size += sizeof(fp->type); 1033 return size; 1034} 1035 1036enum { 1037 CLSF_ADD = 0, 1038 CLSF_DEL = 1, 1039}; 1040 1041/* 1042 * Get the action structure size given action type. To be "future-proof," 1043 * drivers should use this instead of "sizeof (struct filter_action_v2)" 1044 * when computing length for TLV. 1045 */ 1046static inline uint32_t 1047vnic_action_size(struct filter_action_v2 *fap) 1048{ 1049 uint32_t size; 1050 1051 switch (fap->type) { 1052 case FILTER_ACTION_RQ_STEERING: 1053 size = sizeof(struct filter_action); 1054 break; 1055 case FILTER_ACTION_V2: 1056 size = sizeof(struct filter_action_v2); 1057 break; 1058 default: 1059 size = sizeof(struct filter_action); 1060 break; 1061 } 1062 return size; 1063} 1064 1065/* 1066 * Writing cmd register causes STAT_BUSY to get set in status register. 1067 * When cmd completes, STAT_BUSY will be cleared. 1068 * 1069 * If cmd completed successfully STAT_ERROR will be clear 1070 * and args registers contain cmd-specific results. 1071 * 1072 * If cmd error, STAT_ERROR will be set and args[0] contains error code. 1073 * 1074 * status register is read-only. While STAT_BUSY is set, 1075 * all other register contents are read-only. 1076 */ 1077 1078/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */ 1079#define VNIC_DEVCMD_NARGS 15 1080struct vnic_devcmd { 1081 u32 status; /* RO */ 1082 u32 cmd; /* RW */ 1083 u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ 1084}; 1085 1086#define DEVCMD_STATUS 0 1087#define DEVCMD_CMD 4 1088#define DEVCMD_ARGS(x) (8 + (VNIC_DEVCMD_NARGS * x)) 1089 1090/* 1091 * Version 2 of the interface. 1092 * 1093 * Some things are carried over, notably the vnic_devcmd_cmd enum. 1094 */ 1095 1096/* 1097 * Flags for vnic_devcmd2.flags 1098 */ 1099 1100#define DEVCMD2_FNORESULT 0x1 /* Don't copy result to host */ 1101 1102#define VNIC_DEVCMD2_NARGS VNIC_DEVCMD_NARGS 1103struct vnic_devcmd2 { 1104 u16 pad; 1105 u16 flags; 1106 u32 cmd; /* same command #defines as original */ 1107 u64 args[VNIC_DEVCMD2_NARGS]; 1108}; 1109 1110#define VNIC_DEVCMD2_NRESULTS VNIC_DEVCMD_NARGS 1111struct devcmd2_result { 1112 u64 results[VNIC_DEVCMD2_NRESULTS]; 1113 u32 pad; 1114 u16 completed_index; /* into copy WQ */ 1115 u8 error; /* same error codes as original */ 1116 u8 color; /* 0 or 1 as with completion queues */ 1117}; 1118 1119#define DEVCMD2_RING_SIZE 32 1120#define DEVCMD2_DESC_SIZE 128 1121 1122#define DEVCMD2_RESULTS_SIZE_MAX ((1 << 16) - 1) 1123 1124/* Overlay related definitions */ 1125 1126/* 1127 * This enum lists the flag associated with each of the overlay features 1128 */ 1129typedef enum { 1130 OVERLAY_FEATURE_NVGRE = 1, 1131 OVERLAY_FEATURE_VXLAN, 1132 OVERLAY_FEATURE_MAX, 1133} overlay_feature_t; 1134 1135#define OVERLAY_OFFLOAD_ENABLE 0 1136#define OVERLAY_OFFLOAD_DISABLE 1 1137#define OVERLAY_OFFLOAD_ENABLE_V2 2 1138 1139#define OVERLAY_CFG_VXLAN_PORT_UPDATE 0 1140 1141/* 1142 * Use this enum to get the supported versions for each of these features 1143 * If you need to use the devcmd_get_supported_feature_version(), add 1144 * the new feature into this enum and install function handler in devcmd.c 1145 */ 1146typedef enum { 1147 VIC_FEATURE_VXLAN, 1148 VIC_FEATURE_RDMA, 1149 VIC_FEATURE_MAX, 1150} vic_feature_t; 1151 1152/* 1153 * These flags are used in args[1] of devcmd CMD_GET_SUPP_FEATURE_VER 1154 * to indicate the host driver about the VxLAN and Multi WQ features 1155 * supported 1156 */ 1157#define FEATURE_VXLAN_IPV6_INNER (1 << 0) 1158#define FEATURE_VXLAN_IPV6_OUTER (1 << 1) 1159#define FEATURE_VXLAN_MULTI_WQ (1 << 2) 1160 1161#define FEATURE_VXLAN_IPV6 (FEATURE_VXLAN_IPV6_INNER | \ 1162 FEATURE_VXLAN_IPV6_OUTER) 1163 1164/* 1165 * CMD_CONFIG_GRPINTR subcommands 1166 */ 1167typedef enum { 1168 GRPINTR_ENABLE = 1, 1169 GRPINTR_DISABLE, 1170 GRPINTR_UPD_VECT, 1171} grpintr_subcmd_t; 1172 1173/* 1174 * Structure for counter DMA 1175 * (DMAed by CMD_COUNTER_DMA_CONFIG) 1176 */ 1177struct vnic_counter_counts { 1178 u64 vcc_packets; 1179 u64 vcc_bytes; 1180}; 1181 1182#endif /* _VNIC_DEVCMD_H_ */ 1183