1/*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2011 Adrian Chadd, Xenion Pty Ltd. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27#include "opt_ah.h" 28 29#include "ah.h" 30#include "ah_internal.h" 31 32#include "ah_eeprom_v14.h" 33 34#include "ar9002/ar9280.h" 35#include "ar5416/ar5416reg.h" 36#include "ar5416/ar5416phy.h" 37#include "ar9002/ar9002phy.h" 38 39#include "ar9002/ar9280_olc.h" 40 41void 42ar9280olcInit(struct ath_hal *ah) 43{ 44 uint32_t i; 45 46 /* Only do OLC if it's enabled for this chipset */ 47 if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) 48 return; 49 50 HALDEBUG(ah, HAL_DEBUG_RESET, "%s: Setting up TX gain tables.\n", __func__); 51 52 for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++) 53 AH9280(ah)->originalGain[i] = MS(OS_REG_READ(ah, 54 AR_PHY_TX_GAIN_TBL1 + i * 4), AR_PHY_TX_GAIN); 55 56 AH9280(ah)->PDADCdelta = 0; 57} 58 59void 60ar9280olcGetTxGainIndex(struct ath_hal *ah, 61 const struct ieee80211_channel *chan, 62 struct calDataPerFreqOpLoop *rawDatasetOpLoop, 63 uint8_t *calChans, uint16_t availPiers, uint8_t *pwr, uint8_t *pcdacIdx) 64{ 65 uint8_t pcdac, i = 0; 66 uint16_t idxL = 0, idxR = 0, numPiers; 67 HAL_BOOL match; 68 CHAN_CENTERS centers; 69 70 ar5416GetChannelCenters(ah, chan, ¢ers); 71 72 for (numPiers = 0; numPiers < availPiers; numPiers++) 73 if (calChans[numPiers] == AR5416_BCHAN_UNUSED) 74 break; 75 76 match = ath_ee_getLowerUpperIndex((uint8_t)FREQ2FBIN(centers.synth_center, 77 IEEE80211_IS_CHAN_2GHZ(chan)), calChans, numPiers, 78 &idxL, &idxR); 79 if (match) { 80 pcdac = rawDatasetOpLoop[idxL].pcdac[0][0]; 81 *pwr = rawDatasetOpLoop[idxL].pwrPdg[0][0]; 82 } else { 83 pcdac = rawDatasetOpLoop[idxR].pcdac[0][0]; 84 *pwr = (rawDatasetOpLoop[idxL].pwrPdg[0][0] + 85 rawDatasetOpLoop[idxR].pwrPdg[0][0])/2; 86 } 87 while (pcdac > AH9280(ah)->originalGain[i] && 88 i < (AR9280_TX_GAIN_TABLE_SIZE - 1)) 89 i++; 90 91 *pcdacIdx = i; 92} 93 94/* 95 * XXX txPower here is likely not the target txPower in the traditional 96 * XXX sense, but is set by a call to ar9280olcGetTxGainIndex(). 97 * XXX Thus, be careful if you're trying to use this routine yourself. 98 */ 99void 100ar9280olcGetPDADCs(struct ath_hal *ah, uint32_t initTxGain, int txPower, 101 uint8_t *pPDADCValues) 102{ 103 uint32_t i; 104 uint32_t offset; 105 106 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_0, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3); 107 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_1, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3); 108 109 OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL7, AR_PHY_TX_PWRCTRL_INIT_TX_GAIN, initTxGain); 110 111 offset = txPower; 112 for (i = 0; i < AR5416_NUM_PDADC_VALUES; i++) 113 if (i < offset) 114 pPDADCValues[i] = 0x0; 115 else 116 pPDADCValues[i] = 0xFF; 117} 118 119/* 120 * Run temperature compensation calibration. 121 * 122 * The TX gain table is adjusted depending upon the difference 123 * between the initial PDADC value and the currently read 124 * average TX power sample value. This value is only valid if 125 * frames have been transmitted, so currPDADC will be 0 if 126 * no frames have yet been transmitted. 127 */ 128void 129ar9280olcTemperatureCompensation(struct ath_hal *ah) 130{ 131 uint32_t rddata, i; 132 int delta, currPDADC, regval; 133 uint8_t hpwr_5g = 0; 134 135 if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) 136 return; 137 138 rddata = OS_REG_READ(ah, AR_PHY_TX_PWRCTRL4); 139 currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT); 140 141 HALDEBUG(ah, HAL_DEBUG_PERCAL, 142 "%s: called: initPDADC=%d, currPDADC=%d\n", 143 __func__, AH5416(ah)->initPDADC, currPDADC); 144 145 if (AH5416(ah)->initPDADC == 0 || currPDADC == 0) 146 return; 147 148 (void) (ath_hal_eepromGet(ah, AR_EEP_DAC_HPWR_5G, &hpwr_5g)); 149 150 if (hpwr_5g) 151 delta = (currPDADC - AH5416(ah)->initPDADC + 4) / 8; 152 else 153 delta = (currPDADC - AH5416(ah)->initPDADC + 5) / 10; 154 155 HALDEBUG(ah, HAL_DEBUG_PERCAL, "%s: delta=%d, PDADCdelta=%d\n", 156 __func__, delta, AH9280(ah)->PDADCdelta); 157 158 if (delta != AH9280(ah)->PDADCdelta) { 159 AH9280(ah)->PDADCdelta = delta; 160 for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) { 161 regval = AH9280(ah)->originalGain[i] - delta; 162 if (regval < 0) 163 regval = 0; 164 165 OS_REG_RMW_FIELD(ah, 166 AR_PHY_TX_GAIN_TBL1 + i * 4, 167 AR_PHY_TX_GAIN, regval); 168 } 169 } 170} 171 172static int16_t 173ar9280ChangeGainBoundarySettings(struct ath_hal *ah, uint16_t *gb, 174 uint16_t numXpdGain, uint16_t pdGainOverlap_t2, int8_t pwr_table_offset, 175 int16_t *diff) 176{ 177 uint16_t k; 178 179 /* Prior to writing the boundaries or the pdadc vs. power table 180 * into the chip registers the default starting point on the pdadc 181 * vs. power table needs to be checked and the curve boundaries 182 * adjusted accordingly 183 */ 184 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 185 uint16_t gb_limit; 186 187 if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) { 188 /* get the difference in dB */ 189 *diff = (uint16_t)(pwr_table_offset - AR5416_PWR_TABLE_OFFSET_DB); 190 /* get the number of half dB steps */ 191 *diff *= 2; 192 /* change the original gain boundary settings 193 * by the number of half dB steps 194 */ 195 for (k = 0; k < numXpdGain; k++) 196 gb[k] = (uint16_t)(gb[k] - *diff); 197 } 198 /* Because of a hardware limitation, ensure the gain boundary 199 * is not larger than (63 - overlap) 200 */ 201 gb_limit = (uint16_t)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2); 202 203 for (k = 0; k < numXpdGain; k++) 204 gb[k] = (uint16_t)min(gb_limit, gb[k]); 205 } 206 207 return *diff; 208} 209 210static void 211ar9280AdjustPDADCValues(struct ath_hal *ah, int8_t pwr_table_offset, 212 int16_t diff, uint8_t *pdadcValues) 213{ 214#define NUM_PDADC(diff) (AR5416_NUM_PDADC_VALUES - diff) 215 uint16_t k; 216 217 /* If this is a board that has a pwrTableOffset that differs from 218 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the 219 * pdadc vs pwr table needs to be adjusted prior to writing to the 220 * chip. 221 */ 222 if (AR_SREV_MERLIN_20_OR_LATER(ah)) { 223 if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) { 224 /* shift the table to start at the new offset */ 225 for (k = 0; k < (uint16_t)NUM_PDADC(diff); k++ ) { 226 pdadcValues[k] = pdadcValues[k + diff]; 227 } 228 229 /* fill the back of the table */ 230 for (k = (uint16_t)NUM_PDADC(diff); k < NUM_PDADC(0); k++) { 231 pdadcValues[k] = pdadcValues[NUM_PDADC(diff)]; 232 } 233 } 234 } 235#undef NUM_PDADC 236} 237/* 238 * This effectively disables the gain boundaries leaving it 239 * to the open-loop TX power control. 240 */ 241static void 242ar9280SetGainBoundariesOpenLoop(struct ath_hal *ah, int i, 243 uint16_t pdGainOverlap_t2, uint16_t gainBoundaries[]) 244{ 245 int regChainOffset; 246 247 regChainOffset = ar5416GetRegChainOffset(ah, i); 248 249 /* These are unused for OLC */ 250 (void) pdGainOverlap_t2; 251 (void) gainBoundaries; 252 253 HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: chain %d: writing closed loop values\n", 254 __func__, i); 255 256 OS_REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset, 257 SM(0x6, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) | 258 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) | 259 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) | 260 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) | 261 SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4)); 262} 263 264/* Eeprom versioning macros. Returns true if the version is equal or newer than the ver specified */ 265/* XXX shouldn't be here! */ 266#define EEP_MINOR(_ah) \ 267 (AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK) 268#define IS_EEP_MINOR_V2(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_2) 269#define IS_EEP_MINOR_V3(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_3) 270 271/************************************************************** 272 * ar9280SetPowerCalTable 273 * 274 * Pull the PDADC piers from cal data and interpolate them across the given 275 * points as well as from the nearest pier(s) to get a power detector 276 * linear voltage to power level table. 277 * 278 * Handle OLC for Merlin where required. 279 */ 280HAL_BOOL 281ar9280SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData, 282 const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset) 283{ 284 CAL_DATA_PER_FREQ *pRawDataset; 285 uint8_t *pCalBChans = AH_NULL; 286 uint16_t pdGainOverlap_t2; 287 static uint8_t pdadcValues[AR5416_NUM_PDADC_VALUES]; 288 uint16_t gainBoundaries[AR5416_PD_GAINS_IN_MASK]; 289 uint16_t numPiers, i; 290 int16_t tMinCalPower; 291 uint16_t numXpdGain, xpdMask; 292 uint16_t xpdGainValues[AR5416_NUM_PD_GAINS]; 293 uint32_t regChainOffset; 294 int8_t pwr_table_offset; 295 296 OS_MEMZERO(xpdGainValues, sizeof(xpdGainValues)); 297 298 xpdMask = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].xpdGain; 299 300 (void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET, &pwr_table_offset); 301 302 if (IS_EEP_MINOR_V2(ah)) { 303 pdGainOverlap_t2 = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].pdGainOverlap; 304 } else { 305 pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP)); 306 } 307 308 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 309 pCalBChans = pEepData->calFreqPier2G; 310 numPiers = AR5416_NUM_2G_CAL_PIERS; 311 } else { 312 pCalBChans = pEepData->calFreqPier5G; 313 numPiers = AR5416_NUM_5G_CAL_PIERS; 314 } 315 316 /* If OLC is being done, set the init PDADC value appropriately */ 317 if (IEEE80211_IS_CHAN_2GHZ(chan) && AR_SREV_MERLIN_20_OR_LATER(ah) && 318 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) { 319 struct calDataPerFreq *pRawDataset = pEepData->calPierData2G[0]; 320 AH5416(ah)->initPDADC = ((struct calDataPerFreqOpLoop *) pRawDataset)->vpdPdg[0][0]; 321 } else { 322 /* 323 * XXX ath9k doesn't clear this for 5ghz mode if 324 * it were set in 2ghz mode before! 325 * The Merlin OLC temperature compensation code 326 * uses this to calculate the PDADC delta during 327 * calibration ; 0 here effectively stops the 328 * temperature compensation calibration from 329 * occurring. 330 */ 331 AH5416(ah)->initPDADC = 0; 332 } 333 334 /* Calculate the value of xpdgains from the xpdGain Mask */ 335 numXpdGain = ar5416GetXpdGainValues(ah, xpdMask, xpdGainValues); 336 337 /* Write the detector gain biases and their number */ 338 ar5416WriteDetectorGainBiases(ah, numXpdGain, xpdGainValues); 339 340 for (i = 0; i < AR5416_MAX_CHAINS; i++) { 341 regChainOffset = ar5416GetRegChainOffset(ah, i); 342 if (pEepData->baseEepHeader.txMask & (1 << i)) { 343 uint16_t diff; 344 345 if (IEEE80211_IS_CHAN_2GHZ(chan)) { 346 pRawDataset = pEepData->calPierData2G[i]; 347 } else { 348 pRawDataset = pEepData->calPierData5G[i]; 349 } 350 351 /* Fetch the gain boundaries and the PDADC values */ 352 if (AR_SREV_MERLIN_20_OR_LATER(ah) && 353 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) { 354 uint8_t pcdacIdx; 355 uint8_t txPower; 356 357 ar9280olcGetTxGainIndex(ah, chan, 358 (struct calDataPerFreqOpLoop *) pRawDataset, 359 pCalBChans, numPiers, &txPower, &pcdacIdx); 360 ar9280olcGetPDADCs(ah, pcdacIdx, txPower / 2, pdadcValues); 361 } else { 362 ar5416GetGainBoundariesAndPdadcs(ah, chan, 363 pRawDataset, pCalBChans, numPiers, 364 pdGainOverlap_t2, &tMinCalPower, 365 gainBoundaries, pdadcValues, numXpdGain); 366 } 367 368 /* 369 * Prior to writing the boundaries or the pdadc vs. power table 370 * into the chip registers the default starting point on the pdadc 371 * vs. power table needs to be checked and the curve boundaries 372 * adjusted accordingly 373 */ 374 diff = ar9280ChangeGainBoundarySettings(ah, 375 gainBoundaries, numXpdGain, pdGainOverlap_t2, 376 pwr_table_offset, &diff); 377 378 if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) { 379 /* Set gain boundaries for either open- or closed-loop TPC */ 380 if (AR_SREV_MERLIN_20_OR_LATER(ah) && 381 ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) 382 ar9280SetGainBoundariesOpenLoop(ah, 383 i, pdGainOverlap_t2, 384 gainBoundaries); 385 else 386 ar5416SetGainBoundariesClosedLoop(ah, 387 i, pdGainOverlap_t2, 388 gainBoundaries); 389 } 390 391 /* 392 * If this is a board that has a pwrTableOffset that differs from 393 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the 394 * pdadc vs pwr table needs to be adjusted prior to writing to the 395 * chip. 396 */ 397 ar9280AdjustPDADCValues(ah, pwr_table_offset, diff, pdadcValues); 398 399 /* Write the power values into the baseband power table */ 400 ar5416WritePdadcValues(ah, i, pdadcValues); 401 } 402 } 403 *pTxPowerIndexOffset = 0; 404 405 return AH_TRUE; 406} 407