1/* 2 * Copyright (c) 1993, 1994, 1995, 1996, 1997, 1998 3 * The Regents of the University of California. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by the Computer Systems 16 * Engineering Group at Lawrence Berkeley Laboratory. 17 * 4. Neither the name of the University nor of the Laboratory may be used 18 * to endorse or promote products derived from this software without 19 * specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 */ 33 34#ifdef HAVE_CONFIG_H 35#include <config.h> 36#endif 37 38#include <pcap-types.h> 39#ifndef _WIN32 40#include <sys/param.h> 41#ifndef MSDOS 42#include <sys/file.h> 43#endif 44#include <sys/ioctl.h> 45#include <sys/socket.h> 46#ifdef HAVE_SYS_SOCKIO_H 47#include <sys/sockio.h> 48#endif 49 50struct mbuf; /* Squelch compiler warnings on some platforms for */ 51struct rtentry; /* declarations in <net/if.h> */ 52#include <net/if.h> 53#include <netinet/in.h> 54#endif /* _WIN32 */ 55 56#include <stdio.h> 57#include <stdlib.h> 58#include <string.h> 59#if !defined(_MSC_VER) && !defined(__BORLANDC__) && !defined(__MINGW32__) 60#include <unistd.h> 61#endif 62#include <fcntl.h> 63#include <errno.h> 64#include <limits.h> 65 66#include "diag-control.h" 67 68#ifdef HAVE_OS_PROTO_H 69#include "os-proto.h" 70#endif 71 72#ifdef MSDOS 73#include "pcap-dos.h" 74#endif 75 76#include "pcap-int.h" 77 78#include "optimize.h" 79 80#ifdef HAVE_DAG_API 81#include "pcap-dag.h" 82#endif /* HAVE_DAG_API */ 83 84#ifdef HAVE_SEPTEL_API 85#include "pcap-septel.h" 86#endif /* HAVE_SEPTEL_API */ 87 88#ifdef HAVE_SNF_API 89#include "pcap-snf.h" 90#endif /* HAVE_SNF_API */ 91 92#ifdef HAVE_TC_API 93#include "pcap-tc.h" 94#endif /* HAVE_TC_API */ 95 96#ifdef PCAP_SUPPORT_LINUX_USBMON 97#include "pcap-usb-linux.h" 98#endif 99 100#ifdef PCAP_SUPPORT_BT 101#include "pcap-bt-linux.h" 102#endif 103 104#ifdef PCAP_SUPPORT_BT_MONITOR 105#include "pcap-bt-monitor-linux.h" 106#endif 107 108#ifdef PCAP_SUPPORT_NETFILTER 109#include "pcap-netfilter-linux.h" 110#endif 111 112#ifdef PCAP_SUPPORT_NETMAP 113#include "pcap-netmap.h" 114#endif 115 116#ifdef PCAP_SUPPORT_DBUS 117#include "pcap-dbus.h" 118#endif 119 120#ifdef PCAP_SUPPORT_RDMASNIFF 121#include "pcap-rdmasniff.h" 122#endif 123 124#ifdef PCAP_SUPPORT_DPDK 125#include "pcap-dpdk.h" 126#endif 127 128#ifdef HAVE_AIRPCAP_API 129#include "pcap-airpcap.h" 130#endif 131 132#ifdef _WIN32 133/* 134 * To quote the WSAStartup() documentation: 135 * 136 * The WSAStartup function typically leads to protocol-specific helper 137 * DLLs being loaded. As a result, the WSAStartup function should not 138 * be called from the DllMain function in a application DLL. This can 139 * potentially cause deadlocks. 140 * 141 * and the WSACleanup() documentation: 142 * 143 * The WSACleanup function typically leads to protocol-specific helper 144 * DLLs being unloaded. As a result, the WSACleanup function should not 145 * be called from the DllMain function in a application DLL. This can 146 * potentially cause deadlocks. 147 * 148 * So we don't initialize Winsock in a DllMain() routine. 149 * 150 * pcap_init() should be called to initialize pcap on both UN*X and 151 * Windows; it will initialize Winsock on Windows. (It will also be 152 * initialized as needed if pcap_init() hasn't been called.) 153 */ 154 155/* 156 * Start Winsock. 157 * Internal routine. 158 */ 159static int 160internal_wsockinit(char *errbuf) 161{ 162 WORD wVersionRequested; 163 WSADATA wsaData; 164 static int err = -1; 165 static int done = 0; 166 int status; 167 168 if (done) 169 return (err); 170 171 /* 172 * Versions of Windows that don't support Winsock 2.2 are 173 * too old for us. 174 */ 175 wVersionRequested = MAKEWORD(2, 2); 176 status = WSAStartup(wVersionRequested, &wsaData); 177 done = 1; 178 if (status != 0) { 179 if (errbuf != NULL) { 180 pcap_fmt_errmsg_for_win32_err(errbuf, PCAP_ERRBUF_SIZE, 181 status, "WSAStartup() failed"); 182 } 183 return (err); 184 } 185 atexit ((void(*)(void))WSACleanup); 186 err = 0; 187 return (err); 188} 189 190/* 191 * Exported in case some applications using WinPcap/Npcap called it, 192 * even though it wasn't exported. 193 */ 194int 195wsockinit(void) 196{ 197 return (internal_wsockinit(NULL)); 198} 199 200/* 201 * This is the exported function; new programs should call this. 202 * *Newer* programs should call pcap_init(). 203 */ 204int 205pcap_wsockinit(void) 206{ 207 return (internal_wsockinit(NULL)); 208} 209#endif /* _WIN32 */ 210 211/* 212 * Do whatever initialization is needed for libpcap. 213 * 214 * The argument specifies whether we use the local code page or UTF-8 215 * for strings; on UN*X, we just assume UTF-8 in places where the encoding 216 * would matter, whereas, on Windows, we use the local code page for 217 * PCAP_CHAR_ENC_LOCAL and UTF-8 for PCAP_CHAR_ENC_UTF_8. 218 * 219 * On Windows, we also disable the hack in pcap_create() to deal with 220 * being handed UTF-16 strings, because if the user calls this they're 221 * explicitly declaring that they will either be passing local code 222 * page strings or UTF-8 strings, so we don't need to allow UTF-16LE 223 * strings to be passed. For good measure, on Windows *and* UN*X, 224 * we disable pcap_lookupdev(), to prevent anybody from even 225 * *trying* to pass the result of pcap_lookupdev() - which might be 226 * UTF-16LE on Windows, for ugly compatibility reasons - to pcap_create() 227 * or pcap_open_live() or pcap_open(). 228 * 229 * Returns 0 on success, -1 on error. 230 */ 231int pcap_new_api; /* pcap_lookupdev() always fails */ 232int pcap_utf_8_mode; /* Strings should be in UTF-8. */ 233 234int 235pcap_init(unsigned int opts, char *errbuf) 236{ 237 static int initialized; 238 239 /* 240 * Don't allow multiple calls that set different modes; that 241 * may mean a library is initializing pcap in one mode and 242 * a program using that library, or another library used by 243 * that program, is initializing it in another mode. 244 */ 245 switch (opts) { 246 247 case PCAP_CHAR_ENC_LOCAL: 248 /* Leave "UTF-8 mode" off. */ 249 if (initialized) { 250 if (pcap_utf_8_mode) { 251 snprintf(errbuf, PCAP_ERRBUF_SIZE, 252 "Multiple pcap_init calls with different character encodings"); 253 return (PCAP_ERROR); 254 } 255 } 256 break; 257 258 case PCAP_CHAR_ENC_UTF_8: 259 /* Turn on "UTF-8 mode". */ 260 if (initialized) { 261 if (!pcap_utf_8_mode) { 262 snprintf(errbuf, PCAP_ERRBUF_SIZE, 263 "Multiple pcap_init calls with different character encodings"); 264 return (PCAP_ERROR); 265 } 266 } 267 pcap_utf_8_mode = 1; 268 break; 269 270 default: 271 snprintf(errbuf, PCAP_ERRBUF_SIZE, "Unknown options specified"); 272 return (PCAP_ERROR); 273 } 274 275 /* 276 * Turn the appropriate mode on for error messages; those routines 277 * are also used in rpcapd, which has no access to pcap's internal 278 * UTF-8 mode flag, so we have to call a routine to set its 279 * UTF-8 mode flag. 280 */ 281 pcap_fmt_set_encoding(opts); 282 283 if (initialized) { 284 /* 285 * Nothing more to do; for example, on Windows, we've 286 * already initialized Winsock. 287 */ 288 return (0); 289 } 290 291#ifdef _WIN32 292 /* 293 * Now set up Winsock. 294 */ 295 if (internal_wsockinit(errbuf) == -1) { 296 /* Failed. */ 297 return (PCAP_ERROR); 298 } 299#endif 300 301 /* 302 * We're done. 303 */ 304 initialized = 1; 305 pcap_new_api = 1; 306 return (0); 307} 308 309/* 310 * String containing the library version. 311 * Not explicitly exported via a header file - the right API to use 312 * is pcap_lib_version() - but some programs included it, so we 313 * provide it. 314 * 315 * We declare it here, right before defining it, to squelch any 316 * warnings we might get from compilers about the lack of a 317 * declaration. 318 */ 319PCAP_API char pcap_version[]; 320PCAP_API_DEF char pcap_version[] = PACKAGE_VERSION; 321 322static void 323pcap_set_not_initialized_message(pcap_t *pcap) 324{ 325 if (pcap->activated) { 326 /* A module probably forgot to set the function pointer */ 327 (void)snprintf(pcap->errbuf, sizeof(pcap->errbuf), 328 "This operation isn't properly handled by that device"); 329 return; 330 } 331 /* in case the caller doesn't check for PCAP_ERROR_NOT_ACTIVATED */ 332 (void)snprintf(pcap->errbuf, sizeof(pcap->errbuf), 333 "This handle hasn't been activated yet"); 334} 335 336static int 337pcap_read_not_initialized(pcap_t *pcap, int cnt _U_, pcap_handler callback _U_, 338 u_char *user _U_) 339{ 340 pcap_set_not_initialized_message(pcap); 341 /* this means 'not initialized' */ 342 return (PCAP_ERROR_NOT_ACTIVATED); 343} 344 345static int 346pcap_inject_not_initialized(pcap_t *pcap, const void * buf _U_, int size _U_) 347{ 348 pcap_set_not_initialized_message(pcap); 349 /* this means 'not initialized' */ 350 return (PCAP_ERROR_NOT_ACTIVATED); 351} 352 353static int 354pcap_setfilter_not_initialized(pcap_t *pcap, struct bpf_program *fp _U_) 355{ 356 pcap_set_not_initialized_message(pcap); 357 /* this means 'not initialized' */ 358 return (PCAP_ERROR_NOT_ACTIVATED); 359} 360 361static int 362pcap_setdirection_not_initialized(pcap_t *pcap, pcap_direction_t d _U_) 363{ 364 pcap_set_not_initialized_message(pcap); 365 /* this means 'not initialized' */ 366 return (PCAP_ERROR_NOT_ACTIVATED); 367} 368 369static int 370pcap_set_datalink_not_initialized(pcap_t *pcap, int dlt _U_) 371{ 372 pcap_set_not_initialized_message(pcap); 373 /* this means 'not initialized' */ 374 return (PCAP_ERROR_NOT_ACTIVATED); 375} 376 377static int 378pcap_getnonblock_not_initialized(pcap_t *pcap) 379{ 380 pcap_set_not_initialized_message(pcap); 381 /* this means 'not initialized' */ 382 return (PCAP_ERROR_NOT_ACTIVATED); 383} 384 385static int 386pcap_stats_not_initialized(pcap_t *pcap, struct pcap_stat *ps _U_) 387{ 388 pcap_set_not_initialized_message(pcap); 389 /* this means 'not initialized' */ 390 return (PCAP_ERROR_NOT_ACTIVATED); 391} 392 393#ifdef _WIN32 394static struct pcap_stat * 395pcap_stats_ex_not_initialized(pcap_t *pcap, int *pcap_stat_size _U_) 396{ 397 pcap_set_not_initialized_message(pcap); 398 return (NULL); 399} 400 401static int 402pcap_setbuff_not_initialized(pcap_t *pcap, int dim _U_) 403{ 404 pcap_set_not_initialized_message(pcap); 405 /* this means 'not initialized' */ 406 return (PCAP_ERROR_NOT_ACTIVATED); 407} 408 409static int 410pcap_setmode_not_initialized(pcap_t *pcap, int mode _U_) 411{ 412 pcap_set_not_initialized_message(pcap); 413 /* this means 'not initialized' */ 414 return (PCAP_ERROR_NOT_ACTIVATED); 415} 416 417static int 418pcap_setmintocopy_not_initialized(pcap_t *pcap, int size _U_) 419{ 420 pcap_set_not_initialized_message(pcap); 421 /* this means 'not initialized' */ 422 return (PCAP_ERROR_NOT_ACTIVATED); 423} 424 425static HANDLE 426pcap_getevent_not_initialized(pcap_t *pcap) 427{ 428 pcap_set_not_initialized_message(pcap); 429 return (INVALID_HANDLE_VALUE); 430} 431 432static int 433pcap_oid_get_request_not_initialized(pcap_t *pcap, bpf_u_int32 oid _U_, 434 void *data _U_, size_t *lenp _U_) 435{ 436 pcap_set_not_initialized_message(pcap); 437 return (PCAP_ERROR_NOT_ACTIVATED); 438} 439 440static int 441pcap_oid_set_request_not_initialized(pcap_t *pcap, bpf_u_int32 oid _U_, 442 const void *data _U_, size_t *lenp _U_) 443{ 444 pcap_set_not_initialized_message(pcap); 445 return (PCAP_ERROR_NOT_ACTIVATED); 446} 447 448static u_int 449pcap_sendqueue_transmit_not_initialized(pcap_t *pcap, pcap_send_queue* queue _U_, 450 int sync _U_) 451{ 452 pcap_set_not_initialized_message(pcap); 453 return (0); 454} 455 456static int 457pcap_setuserbuffer_not_initialized(pcap_t *pcap, int size _U_) 458{ 459 pcap_set_not_initialized_message(pcap); 460 return (PCAP_ERROR_NOT_ACTIVATED); 461} 462 463static int 464pcap_live_dump_not_initialized(pcap_t *pcap, char *filename _U_, int maxsize _U_, 465 int maxpacks _U_) 466{ 467 pcap_set_not_initialized_message(pcap); 468 return (PCAP_ERROR_NOT_ACTIVATED); 469} 470 471static int 472pcap_live_dump_ended_not_initialized(pcap_t *pcap, int sync _U_) 473{ 474 pcap_set_not_initialized_message(pcap); 475 return (PCAP_ERROR_NOT_ACTIVATED); 476} 477 478static PAirpcapHandle 479pcap_get_airpcap_handle_not_initialized(pcap_t *pcap) 480{ 481 pcap_set_not_initialized_message(pcap); 482 return (NULL); 483} 484#endif 485 486/* 487 * Returns 1 if rfmon mode can be set on the pcap_t, 0 if it can't, 488 * a PCAP_ERROR value on an error. 489 */ 490int 491pcap_can_set_rfmon(pcap_t *p) 492{ 493 return (p->can_set_rfmon_op(p)); 494} 495 496/* 497 * For systems where rfmon mode is never supported. 498 */ 499static int 500pcap_cant_set_rfmon(pcap_t *p _U_) 501{ 502 return (0); 503} 504 505/* 506 * Sets *tstamp_typesp to point to an array 1 or more supported time stamp 507 * types; the return value is the number of supported time stamp types. 508 * The list should be freed by a call to pcap_free_tstamp_types() when 509 * you're done with it. 510 * 511 * A return value of 0 means "you don't get a choice of time stamp type", 512 * in which case *tstamp_typesp is set to null. 513 * 514 * PCAP_ERROR is returned on error. 515 */ 516int 517pcap_list_tstamp_types(pcap_t *p, int **tstamp_typesp) 518{ 519 if (p->tstamp_type_count == 0) { 520 /* 521 * We don't support multiple time stamp types. 522 * That means the only type we support is PCAP_TSTAMP_HOST; 523 * set up a list containing only that type. 524 */ 525 *tstamp_typesp = (int*)malloc(sizeof(**tstamp_typesp)); 526 if (*tstamp_typesp == NULL) { 527 pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf), 528 errno, "malloc"); 529 return (PCAP_ERROR); 530 } 531 **tstamp_typesp = PCAP_TSTAMP_HOST; 532 return (1); 533 } else { 534 *tstamp_typesp = (int*)calloc(sizeof(**tstamp_typesp), 535 p->tstamp_type_count); 536 if (*tstamp_typesp == NULL) { 537 pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf), 538 errno, "malloc"); 539 return (PCAP_ERROR); 540 } 541 (void)memcpy(*tstamp_typesp, p->tstamp_type_list, 542 sizeof(**tstamp_typesp) * p->tstamp_type_count); 543 return (p->tstamp_type_count); 544 } 545} 546 547/* 548 * In Windows, you might have a library built with one version of the 549 * C runtime library and an application built with another version of 550 * the C runtime library, which means that the library might use one 551 * version of malloc() and free() and the application might use another 552 * version of malloc() and free(). If so, that means something 553 * allocated by the library cannot be freed by the application, so we 554 * need to have a pcap_free_tstamp_types() routine to free up the list 555 * allocated by pcap_list_tstamp_types(), even though it's just a wrapper 556 * around free(). 557 */ 558void 559pcap_free_tstamp_types(int *tstamp_type_list) 560{ 561 free(tstamp_type_list); 562} 563 564/* 565 * Default one-shot callback; overridden for capture types where the 566 * packet data cannot be guaranteed to be available after the callback 567 * returns, so that a copy must be made. 568 */ 569void 570pcap_oneshot(u_char *user, const struct pcap_pkthdr *h, const u_char *pkt) 571{ 572 struct oneshot_userdata *sp = (struct oneshot_userdata *)user; 573 574 *sp->hdr = *h; 575 *sp->pkt = pkt; 576} 577 578const u_char * 579pcap_next(pcap_t *p, struct pcap_pkthdr *h) 580{ 581 struct oneshot_userdata s; 582 const u_char *pkt; 583 584 s.hdr = h; 585 s.pkt = &pkt; 586 s.pd = p; 587 if (pcap_dispatch(p, 1, p->oneshot_callback, (u_char *)&s) <= 0) 588 return (0); 589 return (pkt); 590} 591 592int 593pcap_next_ex(pcap_t *p, struct pcap_pkthdr **pkt_header, 594 const u_char **pkt_data) 595{ 596 struct oneshot_userdata s; 597 598 s.hdr = &p->pcap_header; 599 s.pkt = pkt_data; 600 s.pd = p; 601 602 /* Saves a pointer to the packet headers */ 603 *pkt_header= &p->pcap_header; 604 605 if (p->rfile != NULL) { 606 int status; 607 608 /* We are on an offline capture */ 609 status = pcap_offline_read(p, 1, p->oneshot_callback, 610 (u_char *)&s); 611 612 /* 613 * Return codes for pcap_offline_read() are: 614 * - 0: EOF 615 * - -1: error 616 * - >0: OK - result is number of packets read, so 617 * it will be 1 in this case, as we've passed 618 * a maximum packet count of 1 619 * The first one ('0') conflicts with the return code of 620 * 0 from pcap_read() meaning "no packets arrived before 621 * the timeout expired", so we map it to -2 so you can 622 * distinguish between an EOF from a savefile and a 623 * "no packets arrived before the timeout expired, try 624 * again" from a live capture. 625 */ 626 if (status == 0) 627 return (-2); 628 else 629 return (status); 630 } 631 632 /* 633 * Return codes for pcap_read() are: 634 * - 0: timeout 635 * - -1: error 636 * - -2: loop was broken out of with pcap_breakloop() 637 * - >0: OK, result is number of packets captured, so 638 * it will be 1 in this case, as we've passed 639 * a maximum packet count of 1 640 * The first one ('0') conflicts with the return code of 0 from 641 * pcap_offline_read() meaning "end of file". 642 */ 643 return (p->read_op(p, 1, p->oneshot_callback, (u_char *)&s)); 644} 645 646/* 647 * Implementation of a pcap_if_list_t. 648 */ 649struct pcap_if_list { 650 pcap_if_t *beginning; 651}; 652 653static struct capture_source_type { 654 int (*findalldevs_op)(pcap_if_list_t *, char *); 655 pcap_t *(*create_op)(const char *, char *, int *); 656} capture_source_types[] = { 657#ifdef HAVE_DAG_API 658 { dag_findalldevs, dag_create }, 659#endif 660#ifdef HAVE_SEPTEL_API 661 { septel_findalldevs, septel_create }, 662#endif 663#ifdef HAVE_SNF_API 664 { snf_findalldevs, snf_create }, 665#endif 666#ifdef HAVE_TC_API 667 { TcFindAllDevs, TcCreate }, 668#endif 669#ifdef PCAP_SUPPORT_BT 670 { bt_findalldevs, bt_create }, 671#endif 672#ifdef PCAP_SUPPORT_BT_MONITOR 673 { bt_monitor_findalldevs, bt_monitor_create }, 674#endif 675#ifdef PCAP_SUPPORT_LINUX_USBMON 676 { usb_findalldevs, usb_create }, 677#endif 678#ifdef PCAP_SUPPORT_NETFILTER 679 { netfilter_findalldevs, netfilter_create }, 680#endif 681#ifdef PCAP_SUPPORT_NETMAP 682 { pcap_netmap_findalldevs, pcap_netmap_create }, 683#endif 684#ifdef PCAP_SUPPORT_DBUS 685 { dbus_findalldevs, dbus_create }, 686#endif 687#ifdef PCAP_SUPPORT_RDMASNIFF 688 { rdmasniff_findalldevs, rdmasniff_create }, 689#endif 690#ifdef PCAP_SUPPORT_DPDK 691 { pcap_dpdk_findalldevs, pcap_dpdk_create }, 692#endif 693#ifdef HAVE_AIRPCAP_API 694 { airpcap_findalldevs, airpcap_create }, 695#endif 696 { NULL, NULL } 697}; 698 699/* 700 * Get a list of all capture sources that are up and that we can open. 701 * Returns -1 on error, 0 otherwise. 702 * The list, as returned through "alldevsp", may be null if no interfaces 703 * were up and could be opened. 704 */ 705int 706pcap_findalldevs(pcap_if_t **alldevsp, char *errbuf) 707{ 708 size_t i; 709 pcap_if_list_t devlist; 710 711 /* 712 * Find all the local network interfaces on which we 713 * can capture. 714 */ 715 devlist.beginning = NULL; 716 if (pcap_platform_finddevs(&devlist, errbuf) == -1) { 717 /* 718 * Failed - free all of the entries we were given 719 * before we failed. 720 */ 721 if (devlist.beginning != NULL) 722 pcap_freealldevs(devlist.beginning); 723 *alldevsp = NULL; 724 return (-1); 725 } 726 727 /* 728 * Ask each of the non-local-network-interface capture 729 * source types what interfaces they have. 730 */ 731 for (i = 0; capture_source_types[i].findalldevs_op != NULL; i++) { 732 if (capture_source_types[i].findalldevs_op(&devlist, errbuf) == -1) { 733 /* 734 * We had an error; free the list we've been 735 * constructing. 736 */ 737 if (devlist.beginning != NULL) 738 pcap_freealldevs(devlist.beginning); 739 *alldevsp = NULL; 740 return (-1); 741 } 742 } 743 744 /* 745 * Return the first entry of the list of all devices. 746 */ 747 *alldevsp = devlist.beginning; 748 return (0); 749} 750 751static struct sockaddr * 752dup_sockaddr(struct sockaddr *sa, size_t sa_length) 753{ 754 struct sockaddr *newsa; 755 756 if ((newsa = malloc(sa_length)) == NULL) 757 return (NULL); 758 return (memcpy(newsa, sa, sa_length)); 759} 760 761/* 762 * Construct a "figure of merit" for an interface, for use when sorting 763 * the list of interfaces, in which interfaces that are up are superior 764 * to interfaces that aren't up, interfaces that are up and running are 765 * superior to interfaces that are up but not running, and non-loopback 766 * interfaces that are up and running are superior to loopback interfaces, 767 * and interfaces with the same flags have a figure of merit that's higher 768 * the lower the instance number. 769 * 770 * The goal is to try to put the interfaces most likely to be useful for 771 * capture at the beginning of the list. 772 * 773 * The figure of merit, which is lower the "better" the interface is, 774 * has the uppermost bit set if the interface isn't running, the bit 775 * below that set if the interface isn't up, the bit below that 776 * set if the interface is a loopback interface, and the bit below 777 * that set if it's the "any" interface. 778 * 779 * Note: we don't sort by unit number because 1) not all interfaces have 780 * a unit number (systemd, for example, might assign interface names 781 * based on the interface's MAC address or on the physical location of 782 * the adapter's connector), and 2) if the name does end with a simple 783 * unit number, it's not a global property of the interface, it's only 784 * useful as a sort key for device names with the same prefix, so xyz0 785 * shouldn't necessarily sort before abc2. This means that interfaces 786 * with the same figure of merit will be sorted by the order in which 787 * the mechanism from which we're getting the interfaces supplies them. 788 */ 789static u_int 790get_figure_of_merit(pcap_if_t *dev) 791{ 792 u_int n; 793 794 n = 0; 795 if (!(dev->flags & PCAP_IF_RUNNING)) 796 n |= 0x80000000; 797 if (!(dev->flags & PCAP_IF_UP)) 798 n |= 0x40000000; 799 800 /* 801 * Give non-wireless interfaces that aren't disconnected a better 802 * figure of merit than interfaces that are disconnected, as 803 * "disconnected" should indicate that the interface isn't 804 * plugged into a network and thus won't give you any traffic. 805 * 806 * For wireless interfaces, it means "associated with a network", 807 * which we presume not to necessarily prevent capture, as you 808 * might run the adapter in some flavor of monitor mode. 809 */ 810 if (!(dev->flags & PCAP_IF_WIRELESS) && 811 (dev->flags & PCAP_IF_CONNECTION_STATUS) == PCAP_IF_CONNECTION_STATUS_DISCONNECTED) 812 n |= 0x20000000; 813 814 /* 815 * Sort loopback devices after non-loopback devices, *except* for 816 * disconnected devices. 817 */ 818 if (dev->flags & PCAP_IF_LOOPBACK) 819 n |= 0x10000000; 820 821 /* 822 * Sort the "any" device before loopback and disconnected devices, 823 * but after all other devices. 824 */ 825 if (strcmp(dev->name, "any") == 0) 826 n |= 0x08000000; 827 828 return (n); 829} 830 831#ifndef _WIN32 832/* 833 * Try to get a description for a given device. 834 * Returns a mallocated description if it could and NULL if it couldn't. 835 * 836 * XXX - on FreeBSDs that support it, should it get the sysctl named 837 * "dev.{adapter family name}.{adapter unit}.%desc" to get a description 838 * of the adapter? Note that "dev.an.0.%desc" is "Aironet PC4500/PC4800" 839 * with my Cisco 350 card, so the name isn't entirely descriptive. The 840 * "dev.an.0.%pnpinfo" has a better description, although one might argue 841 * that the problem is really a driver bug - if it can find out that it's 842 * a Cisco 340 or 350, rather than an old Aironet card, it should use 843 * that in the description. 844 * 845 * Do NetBSD, DragonflyBSD, or OpenBSD support this as well? FreeBSD 846 * and OpenBSD let you get a description, but it's not generated by the OS, 847 * it's set with another ioctl that ifconfig supports; we use that to get 848 * a description in FreeBSD and OpenBSD, but if there is no such 849 * description available, it still might be nice to get some description 850 * string based on the device type or something such as that. 851 * 852 * In macOS, the System Configuration framework can apparently return 853 * names in 10.4 and later. 854 * 855 * It also appears that freedesktop.org's HAL offers an "info.product" 856 * string, but the HAL specification says it "should not be used in any 857 * UI" and "subsystem/capability specific properties" should be used 858 * instead and, in any case, I think HAL is being deprecated in 859 * favor of other stuff such as DeviceKit. DeviceKit doesn't appear 860 * to have any obvious product information for devices, but maybe 861 * I haven't looked hard enough. 862 * 863 * Using the System Configuration framework, or HAL, or DeviceKit, or 864 * whatever, would require that libpcap applications be linked with 865 * the frameworks/libraries in question. That shouldn't be a problem 866 * for programs linking with the shared version of libpcap (unless 867 * you're running on AIX - which I think is the only UN*X that doesn't 868 * support linking a shared library with other libraries on which it 869 * depends, and having an executable linked only with the first shared 870 * library automatically pick up the other libraries when started - 871 * and using HAL or whatever). Programs linked with the static 872 * version of libpcap would have to use pcap-config with the --static 873 * flag in order to get the right linker flags in order to pick up 874 * the additional libraries/frameworks; those programs need that anyway 875 * for libpcap 1.1 and beyond on Linux, as, by default, it requires 876 * -lnl. 877 * 878 * Do any other UN*Xes, or desktop environments support getting a 879 * description? 880 */ 881static char * 882#ifdef SIOCGIFDESCR 883get_if_description(const char *name) 884{ 885 char *description = NULL; 886 int s; 887 struct ifreq ifrdesc; 888#ifndef IFDESCRSIZE 889 size_t descrlen = 64; 890#else 891 size_t descrlen = IFDESCRSIZE; 892#endif /* IFDESCRSIZE */ 893 894 /* 895 * Get the description for the interface. 896 */ 897 memset(&ifrdesc, 0, sizeof ifrdesc); 898 pcap_strlcpy(ifrdesc.ifr_name, name, sizeof ifrdesc.ifr_name); 899 s = socket(AF_INET, SOCK_DGRAM, 0); 900 if (s >= 0) { 901#ifdef __FreeBSD__ 902 /* 903 * On FreeBSD, if the buffer isn't big enough for the 904 * description, the ioctl succeeds, but the description 905 * isn't copied, ifr_buffer.length is set to the description 906 * length, and ifr_buffer.buffer is set to NULL. 907 */ 908 for (;;) { 909 free(description); 910 if ((description = malloc(descrlen)) != NULL) { 911 ifrdesc.ifr_buffer.buffer = description; 912 ifrdesc.ifr_buffer.length = descrlen; 913 if (ioctl(s, SIOCGIFDESCR, &ifrdesc) == 0) { 914 if (ifrdesc.ifr_buffer.buffer == 915 description) 916 break; 917 else 918 descrlen = ifrdesc.ifr_buffer.length; 919 } else { 920 /* 921 * Failed to get interface description. 922 */ 923 free(description); 924 description = NULL; 925 break; 926 } 927 } else 928 break; 929 } 930#else /* __FreeBSD__ */ 931 /* 932 * The only other OS that currently supports 933 * SIOCGIFDESCR is OpenBSD, and it has no way 934 * to get the description length - it's clamped 935 * to a maximum of IFDESCRSIZE. 936 */ 937 if ((description = malloc(descrlen)) != NULL) { 938 ifrdesc.ifr_data = (caddr_t)description; 939 if (ioctl(s, SIOCGIFDESCR, &ifrdesc) != 0) { 940 /* 941 * Failed to get interface description. 942 */ 943 free(description); 944 description = NULL; 945 } 946 } 947#endif /* __FreeBSD__ */ 948 close(s); 949 if (description != NULL && description[0] == '\0') { 950 /* 951 * Description is empty, so discard it. 952 */ 953 free(description); 954 description = NULL; 955 } 956 } 957 958#ifdef __FreeBSD__ 959 /* 960 * For FreeBSD, if we didn't get a description, and this is 961 * a device with a name of the form usbusN, label it as a USB 962 * bus. 963 */ 964 if (description == NULL) { 965 if (strncmp(name, "usbus", 5) == 0) { 966 /* 967 * OK, it begins with "usbus". 968 */ 969 long busnum; 970 char *p; 971 972 errno = 0; 973 busnum = strtol(name + 5, &p, 10); 974 if (errno == 0 && p != name + 5 && *p == '\0' && 975 busnum >= 0 && busnum <= INT_MAX) { 976 /* 977 * OK, it's a valid number that's not 978 * bigger than INT_MAX. Construct 979 * a description from it. 980 * (If that fails, we don't worry about 981 * it, we just return NULL.) 982 */ 983 if (pcap_asprintf(&description, 984 "USB bus number %ld", busnum) == -1) { 985 /* Failed. */ 986 description = NULL; 987 } 988 } 989 } 990 } 991#endif 992 return (description); 993#else /* SIOCGIFDESCR */ 994get_if_description(const char *name _U_) 995{ 996 return (NULL); 997#endif /* SIOCGIFDESCR */ 998} 999 1000/* 1001 * Look for a given device in the specified list of devices. 1002 * 1003 * If we find it, return a pointer to its entry. 1004 * 1005 * If we don't find it, attempt to add an entry for it, with the specified 1006 * IFF_ flags and description, and, if that succeeds, return a pointer to 1007 * the new entry, otherwise return NULL and set errbuf to an error message. 1008 */ 1009pcap_if_t * 1010find_or_add_if(pcap_if_list_t *devlistp, const char *name, 1011 bpf_u_int32 if_flags, get_if_flags_func get_flags_func, char *errbuf) 1012{ 1013 bpf_u_int32 pcap_flags; 1014 1015 /* 1016 * Convert IFF_ flags to pcap flags. 1017 */ 1018 pcap_flags = 0; 1019#ifdef IFF_LOOPBACK 1020 if (if_flags & IFF_LOOPBACK) 1021 pcap_flags |= PCAP_IF_LOOPBACK; 1022#else 1023 /* 1024 * We don't have IFF_LOOPBACK, so look at the device name to 1025 * see if it looks like a loopback device. 1026 */ 1027 if (name[0] == 'l' && name[1] == 'o' && 1028 (PCAP_ISDIGIT(name[2]) || name[2] == '\0')) 1029 pcap_flags |= PCAP_IF_LOOPBACK; 1030#endif 1031#ifdef IFF_UP 1032 if (if_flags & IFF_UP) 1033 pcap_flags |= PCAP_IF_UP; 1034#endif 1035#ifdef IFF_RUNNING 1036 if (if_flags & IFF_RUNNING) 1037 pcap_flags |= PCAP_IF_RUNNING; 1038#endif 1039 1040 /* 1041 * Attempt to find an entry for this device; if we don't find one, 1042 * attempt to add one. 1043 */ 1044 return (find_or_add_dev(devlistp, name, pcap_flags, 1045 get_flags_func, get_if_description(name), errbuf)); 1046} 1047 1048/* 1049 * Look for a given device in the specified list of devices. 1050 * 1051 * If we find it, then, if the specified address isn't null, add it to 1052 * the list of addresses for the device and return 0. 1053 * 1054 * If we don't find it, attempt to add an entry for it, with the specified 1055 * IFF_ flags and description, and, if that succeeds, add the specified 1056 * address to its list of addresses if that address is non-null, and 1057 * return 0, otherwise return -1 and set errbuf to an error message. 1058 * 1059 * (We can get called with a null address because we might get a list 1060 * of interface name/address combinations from the underlying OS, with 1061 * the address being absent in some cases, rather than a list of 1062 * interfaces with each interface having a list of addresses, so this 1063 * call may be the only call made to add to the list, and we want to 1064 * add interfaces even if they have no addresses.) 1065 */ 1066int 1067add_addr_to_if(pcap_if_list_t *devlistp, const char *name, 1068 bpf_u_int32 if_flags, get_if_flags_func get_flags_func, 1069 struct sockaddr *addr, size_t addr_size, 1070 struct sockaddr *netmask, size_t netmask_size, 1071 struct sockaddr *broadaddr, size_t broadaddr_size, 1072 struct sockaddr *dstaddr, size_t dstaddr_size, 1073 char *errbuf) 1074{ 1075 pcap_if_t *curdev; 1076 1077 /* 1078 * Check whether the device exists and, if not, add it. 1079 */ 1080 curdev = find_or_add_if(devlistp, name, if_flags, get_flags_func, 1081 errbuf); 1082 if (curdev == NULL) { 1083 /* 1084 * Error - give up. 1085 */ 1086 return (-1); 1087 } 1088 1089 if (addr == NULL) { 1090 /* 1091 * There's no address to add; this entry just meant 1092 * "here's a new interface". 1093 */ 1094 return (0); 1095 } 1096 1097 /* 1098 * "curdev" is an entry for this interface, and we have an 1099 * address for it; add an entry for that address to the 1100 * interface's list of addresses. 1101 */ 1102 return (add_addr_to_dev(curdev, addr, addr_size, netmask, 1103 netmask_size, broadaddr, broadaddr_size, dstaddr, 1104 dstaddr_size, errbuf)); 1105} 1106#endif /* _WIN32 */ 1107 1108/* 1109 * Add an entry to the list of addresses for an interface. 1110 * "curdev" is the entry for that interface. 1111 */ 1112int 1113add_addr_to_dev(pcap_if_t *curdev, 1114 struct sockaddr *addr, size_t addr_size, 1115 struct sockaddr *netmask, size_t netmask_size, 1116 struct sockaddr *broadaddr, size_t broadaddr_size, 1117 struct sockaddr *dstaddr, size_t dstaddr_size, 1118 char *errbuf) 1119{ 1120 pcap_addr_t *curaddr, *prevaddr, *nextaddr; 1121 1122 /* 1123 * Allocate the new entry and fill it in. 1124 */ 1125 curaddr = (pcap_addr_t *)malloc(sizeof(pcap_addr_t)); 1126 if (curaddr == NULL) { 1127 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1128 errno, "malloc"); 1129 return (-1); 1130 } 1131 1132 curaddr->next = NULL; 1133 if (addr != NULL && addr_size != 0) { 1134 curaddr->addr = (struct sockaddr *)dup_sockaddr(addr, addr_size); 1135 if (curaddr->addr == NULL) { 1136 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1137 errno, "malloc"); 1138 free(curaddr); 1139 return (-1); 1140 } 1141 } else 1142 curaddr->addr = NULL; 1143 1144 if (netmask != NULL && netmask_size != 0) { 1145 curaddr->netmask = (struct sockaddr *)dup_sockaddr(netmask, netmask_size); 1146 if (curaddr->netmask == NULL) { 1147 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1148 errno, "malloc"); 1149 if (curaddr->addr != NULL) 1150 free(curaddr->addr); 1151 free(curaddr); 1152 return (-1); 1153 } 1154 } else 1155 curaddr->netmask = NULL; 1156 1157 if (broadaddr != NULL && broadaddr_size != 0) { 1158 curaddr->broadaddr = (struct sockaddr *)dup_sockaddr(broadaddr, broadaddr_size); 1159 if (curaddr->broadaddr == NULL) { 1160 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1161 errno, "malloc"); 1162 if (curaddr->netmask != NULL) 1163 free(curaddr->netmask); 1164 if (curaddr->addr != NULL) 1165 free(curaddr->addr); 1166 free(curaddr); 1167 return (-1); 1168 } 1169 } else 1170 curaddr->broadaddr = NULL; 1171 1172 if (dstaddr != NULL && dstaddr_size != 0) { 1173 curaddr->dstaddr = (struct sockaddr *)dup_sockaddr(dstaddr, dstaddr_size); 1174 if (curaddr->dstaddr == NULL) { 1175 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1176 errno, "malloc"); 1177 if (curaddr->broadaddr != NULL) 1178 free(curaddr->broadaddr); 1179 if (curaddr->netmask != NULL) 1180 free(curaddr->netmask); 1181 if (curaddr->addr != NULL) 1182 free(curaddr->addr); 1183 free(curaddr); 1184 return (-1); 1185 } 1186 } else 1187 curaddr->dstaddr = NULL; 1188 1189 /* 1190 * Find the end of the list of addresses. 1191 */ 1192 for (prevaddr = curdev->addresses; prevaddr != NULL; prevaddr = nextaddr) { 1193 nextaddr = prevaddr->next; 1194 if (nextaddr == NULL) { 1195 /* 1196 * This is the end of the list. 1197 */ 1198 break; 1199 } 1200 } 1201 1202 if (prevaddr == NULL) { 1203 /* 1204 * The list was empty; this is the first member. 1205 */ 1206 curdev->addresses = curaddr; 1207 } else { 1208 /* 1209 * "prevaddr" is the last member of the list; append 1210 * this member to it. 1211 */ 1212 prevaddr->next = curaddr; 1213 } 1214 1215 return (0); 1216} 1217 1218/* 1219 * Look for a given device in the specified list of devices. 1220 * 1221 * If we find it, return 0 and set *curdev_ret to point to it. 1222 * 1223 * If we don't find it, attempt to add an entry for it, with the specified 1224 * flags and description, and, if that succeeds, return 0, otherwise 1225 * return -1 and set errbuf to an error message. 1226 */ 1227pcap_if_t * 1228find_or_add_dev(pcap_if_list_t *devlistp, const char *name, bpf_u_int32 flags, 1229 get_if_flags_func get_flags_func, const char *description, char *errbuf) 1230{ 1231 pcap_if_t *curdev; 1232 1233 /* 1234 * Is there already an entry in the list for this device? 1235 */ 1236 curdev = find_dev(devlistp, name); 1237 if (curdev != NULL) { 1238 /* 1239 * Yes, return it. 1240 */ 1241 return (curdev); 1242 } 1243 1244 /* 1245 * No, we didn't find it. 1246 */ 1247 1248 /* 1249 * Try to get additional flags for the device. 1250 */ 1251 if ((*get_flags_func)(name, &flags, errbuf) == -1) { 1252 /* 1253 * Failed. 1254 */ 1255 return (NULL); 1256 } 1257 1258 /* 1259 * Now, try to add it to the list of devices. 1260 */ 1261 return (add_dev(devlistp, name, flags, description, errbuf)); 1262} 1263 1264/* 1265 * Look for a given device in the specified list of devices, and return 1266 * the entry for it if we find it or NULL if we don't. 1267 */ 1268pcap_if_t * 1269find_dev(pcap_if_list_t *devlistp, const char *name) 1270{ 1271 pcap_if_t *curdev; 1272 1273 /* 1274 * Is there an entry in the list for this device? 1275 */ 1276 for (curdev = devlistp->beginning; curdev != NULL; 1277 curdev = curdev->next) { 1278 if (strcmp(name, curdev->name) == 0) { 1279 /* 1280 * We found it, so, yes, there is. No need to 1281 * add it. Provide the entry we found to our 1282 * caller. 1283 */ 1284 return (curdev); 1285 } 1286 } 1287 1288 /* 1289 * No. 1290 */ 1291 return (NULL); 1292} 1293 1294/* 1295 * Attempt to add an entry for a device, with the specified flags 1296 * and description, and, if that succeeds, return 0 and return a pointer 1297 * to the new entry, otherwise return NULL and set errbuf to an error 1298 * message. 1299 * 1300 * If we weren't given a description, try to get one. 1301 */ 1302pcap_if_t * 1303add_dev(pcap_if_list_t *devlistp, const char *name, bpf_u_int32 flags, 1304 const char *description, char *errbuf) 1305{ 1306 pcap_if_t *curdev, *prevdev, *nextdev; 1307 u_int this_figure_of_merit, nextdev_figure_of_merit; 1308 1309 curdev = malloc(sizeof(pcap_if_t)); 1310 if (curdev == NULL) { 1311 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1312 errno, "malloc"); 1313 return (NULL); 1314 } 1315 1316 /* 1317 * Fill in the entry. 1318 */ 1319 curdev->next = NULL; 1320 curdev->name = strdup(name); 1321 if (curdev->name == NULL) { 1322 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1323 errno, "malloc"); 1324 free(curdev); 1325 return (NULL); 1326 } 1327 if (description == NULL) { 1328 /* 1329 * We weren't handed a description for the interface. 1330 */ 1331 curdev->description = NULL; 1332 } else { 1333 /* 1334 * We were handed a description; make a copy. 1335 */ 1336 curdev->description = strdup(description); 1337 if (curdev->description == NULL) { 1338 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1339 errno, "malloc"); 1340 free(curdev->name); 1341 free(curdev); 1342 return (NULL); 1343 } 1344 } 1345 curdev->addresses = NULL; /* list starts out as empty */ 1346 curdev->flags = flags; 1347 1348 /* 1349 * Add it to the list, in the appropriate location. 1350 * First, get the "figure of merit" for this interface. 1351 */ 1352 this_figure_of_merit = get_figure_of_merit(curdev); 1353 1354 /* 1355 * Now look for the last interface with an figure of merit 1356 * less than or equal to the new interface's figure of merit. 1357 * 1358 * We start with "prevdev" being NULL, meaning we're before 1359 * the first element in the list. 1360 */ 1361 prevdev = NULL; 1362 for (;;) { 1363 /* 1364 * Get the interface after this one. 1365 */ 1366 if (prevdev == NULL) { 1367 /* 1368 * The next element is the first element. 1369 */ 1370 nextdev = devlistp->beginning; 1371 } else 1372 nextdev = prevdev->next; 1373 1374 /* 1375 * Are we at the end of the list? 1376 */ 1377 if (nextdev == NULL) { 1378 /* 1379 * Yes - we have to put the new entry after "prevdev". 1380 */ 1381 break; 1382 } 1383 1384 /* 1385 * Is the new interface's figure of merit less 1386 * than the next interface's figure of merit, 1387 * meaning that the new interface is better 1388 * than the next interface? 1389 */ 1390 nextdev_figure_of_merit = get_figure_of_merit(nextdev); 1391 if (this_figure_of_merit < nextdev_figure_of_merit) { 1392 /* 1393 * Yes - we should put the new entry 1394 * before "nextdev", i.e. after "prevdev". 1395 */ 1396 break; 1397 } 1398 1399 prevdev = nextdev; 1400 } 1401 1402 /* 1403 * Insert before "nextdev". 1404 */ 1405 curdev->next = nextdev; 1406 1407 /* 1408 * Insert after "prevdev" - unless "prevdev" is null, 1409 * in which case this is the first interface. 1410 */ 1411 if (prevdev == NULL) { 1412 /* 1413 * This is the first interface. Make it 1414 * the first element in the list of devices. 1415 */ 1416 devlistp->beginning = curdev; 1417 } else 1418 prevdev->next = curdev; 1419 return (curdev); 1420} 1421 1422/* 1423 * Free a list of interfaces. 1424 */ 1425void 1426pcap_freealldevs(pcap_if_t *alldevs) 1427{ 1428 pcap_if_t *curdev, *nextdev; 1429 pcap_addr_t *curaddr, *nextaddr; 1430 1431 for (curdev = alldevs; curdev != NULL; curdev = nextdev) { 1432 nextdev = curdev->next; 1433 1434 /* 1435 * Free all addresses. 1436 */ 1437 for (curaddr = curdev->addresses; curaddr != NULL; curaddr = nextaddr) { 1438 nextaddr = curaddr->next; 1439 if (curaddr->addr) 1440 free(curaddr->addr); 1441 if (curaddr->netmask) 1442 free(curaddr->netmask); 1443 if (curaddr->broadaddr) 1444 free(curaddr->broadaddr); 1445 if (curaddr->dstaddr) 1446 free(curaddr->dstaddr); 1447 free(curaddr); 1448 } 1449 1450 /* 1451 * Free the name string. 1452 */ 1453 free(curdev->name); 1454 1455 /* 1456 * Free the description string, if any. 1457 */ 1458 if (curdev->description != NULL) 1459 free(curdev->description); 1460 1461 /* 1462 * Free the interface. 1463 */ 1464 free(curdev); 1465 } 1466} 1467 1468/* 1469 * pcap-npf.c has its own pcap_lookupdev(), for compatibility reasons, as 1470 * it actually returns the names of all interfaces, with a NUL separator 1471 * between them; some callers may depend on that. 1472 * 1473 * MS-DOS has its own pcap_lookupdev(), but that might be useful only 1474 * as an optimization. 1475 * 1476 * In all other cases, we just use pcap_findalldevs() to get a list of 1477 * devices, and pick from that list. 1478 */ 1479#if !defined(HAVE_PACKET32) && !defined(MSDOS) 1480/* 1481 * Return the name of a network interface attached to the system, or NULL 1482 * if none can be found. The interface must be configured up; the 1483 * lowest unit number is preferred; loopback is ignored. 1484 */ 1485char * 1486pcap_lookupdev(char *errbuf) 1487{ 1488 pcap_if_t *alldevs; 1489#ifdef _WIN32 1490 /* 1491 * Windows - use the same size as the old WinPcap 3.1 code. 1492 * XXX - this is probably bigger than it needs to be. 1493 */ 1494 #define IF_NAMESIZE 8192 1495#else 1496 /* 1497 * UN*X - use the system's interface name size. 1498 * XXX - that might not be large enough for capture devices 1499 * that aren't regular network interfaces. 1500 */ 1501 /* for old BSD systems, including bsdi3 */ 1502 #ifndef IF_NAMESIZE 1503 #define IF_NAMESIZE IFNAMSIZ 1504 #endif 1505#endif 1506 static char device[IF_NAMESIZE + 1]; 1507 char *ret; 1508 1509 /* 1510 * We disable this in "new API" mode, because 1) in WinPcap/Npcap, 1511 * it may return UTF-16 strings, for backwards-compatibility 1512 * reasons, and we're also disabling the hack to make that work, 1513 * for not-going-past-the-end-of-a-string reasons, and 2) we 1514 * want its behavior to be consistent. 1515 * 1516 * In addition, it's not thread-safe, so we've marked it as 1517 * deprecated. 1518 */ 1519 if (pcap_new_api) { 1520 snprintf(errbuf, PCAP_ERRBUF_SIZE, 1521 "pcap_lookupdev() is deprecated and is not supported in programs calling pcap_init()"); 1522 return (NULL); 1523 } 1524 1525 if (pcap_findalldevs(&alldevs, errbuf) == -1) 1526 return (NULL); 1527 1528 if (alldevs == NULL || (alldevs->flags & PCAP_IF_LOOPBACK)) { 1529 /* 1530 * There are no devices on the list, or the first device 1531 * on the list is a loopback device, which means there 1532 * are no non-loopback devices on the list. This means 1533 * we can't return any device. 1534 * 1535 * XXX - why not return a loopback device? If we can't 1536 * capture on it, it won't be on the list, and if it's 1537 * on the list, there aren't any non-loopback devices, 1538 * so why not just supply it as the default device? 1539 */ 1540 (void)pcap_strlcpy(errbuf, "no suitable device found", 1541 PCAP_ERRBUF_SIZE); 1542 ret = NULL; 1543 } else { 1544 /* 1545 * Return the name of the first device on the list. 1546 */ 1547 (void)pcap_strlcpy(device, alldevs->name, sizeof(device)); 1548 ret = device; 1549 } 1550 1551 pcap_freealldevs(alldevs); 1552 return (ret); 1553} 1554#endif /* !defined(HAVE_PACKET32) && !defined(MSDOS) */ 1555 1556#if !defined(_WIN32) && !defined(MSDOS) 1557/* 1558 * We don't just fetch the entire list of devices, search for the 1559 * particular device, and use its first IPv4 address, as that's too 1560 * much work to get just one device's netmask. 1561 * 1562 * If we had an API to get attributes for a given device, we could 1563 * use that. 1564 */ 1565int 1566pcap_lookupnet(const char *device, bpf_u_int32 *netp, bpf_u_int32 *maskp, 1567 char *errbuf) 1568{ 1569 register int fd; 1570 register struct sockaddr_in *sin4; 1571 struct ifreq ifr; 1572 1573 /* 1574 * The pseudo-device "any" listens on all interfaces and therefore 1575 * has the network address and -mask "0.0.0.0" therefore catching 1576 * all traffic. Using NULL for the interface is the same as "any". 1577 */ 1578 if (!device || strcmp(device, "any") == 0 1579#ifdef HAVE_DAG_API 1580 || strstr(device, "dag") != NULL 1581#endif 1582#ifdef HAVE_SEPTEL_API 1583 || strstr(device, "septel") != NULL 1584#endif 1585#ifdef PCAP_SUPPORT_BT 1586 || strstr(device, "bluetooth") != NULL 1587#endif 1588#ifdef PCAP_SUPPORT_LINUX_USBMON 1589 || strstr(device, "usbmon") != NULL 1590#endif 1591#ifdef HAVE_SNF_API 1592 || strstr(device, "snf") != NULL 1593#endif 1594#ifdef PCAP_SUPPORT_NETMAP 1595 || strncmp(device, "netmap:", 7) == 0 1596 || strncmp(device, "vale", 4) == 0 1597#endif 1598#ifdef PCAP_SUPPORT_DPDK 1599 || strncmp(device, "dpdk:", 5) == 0 1600#endif 1601 ) { 1602 *netp = *maskp = 0; 1603 return 0; 1604 } 1605 1606 fd = socket(AF_INET, SOCK_DGRAM, 0); 1607 if (fd < 0) { 1608 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1609 errno, "socket"); 1610 return (-1); 1611 } 1612 memset(&ifr, 0, sizeof(ifr)); 1613#ifdef linux 1614 /* XXX Work around Linux kernel bug */ 1615 ifr.ifr_addr.sa_family = AF_INET; 1616#endif 1617 (void)pcap_strlcpy(ifr.ifr_name, device, sizeof(ifr.ifr_name)); 1618 if (ioctl(fd, SIOCGIFADDR, (char *)&ifr) < 0) { 1619 if (errno == EADDRNOTAVAIL) { 1620 (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, 1621 "%s: no IPv4 address assigned", device); 1622 } else { 1623 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1624 errno, "SIOCGIFADDR: %s", device); 1625 } 1626 (void)close(fd); 1627 return (-1); 1628 } 1629 sin4 = (struct sockaddr_in *)&ifr.ifr_addr; 1630 *netp = sin4->sin_addr.s_addr; 1631 memset(&ifr, 0, sizeof(ifr)); 1632#ifdef linux 1633 /* XXX Work around Linux kernel bug */ 1634 ifr.ifr_addr.sa_family = AF_INET; 1635#endif 1636 (void)pcap_strlcpy(ifr.ifr_name, device, sizeof(ifr.ifr_name)); 1637 if (ioctl(fd, SIOCGIFNETMASK, (char *)&ifr) < 0) { 1638 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 1639 errno, "SIOCGIFNETMASK: %s", device); 1640 (void)close(fd); 1641 return (-1); 1642 } 1643 (void)close(fd); 1644 *maskp = sin4->sin_addr.s_addr; 1645 if (*maskp == 0) { 1646 if (IN_CLASSA(*netp)) 1647 *maskp = IN_CLASSA_NET; 1648 else if (IN_CLASSB(*netp)) 1649 *maskp = IN_CLASSB_NET; 1650 else if (IN_CLASSC(*netp)) 1651 *maskp = IN_CLASSC_NET; 1652 else { 1653 (void)snprintf(errbuf, PCAP_ERRBUF_SIZE, 1654 "inet class for 0x%x unknown", *netp); 1655 return (-1); 1656 } 1657 } 1658 *netp &= *maskp; 1659 return (0); 1660} 1661#endif /* !defined(_WIN32) && !defined(MSDOS) */ 1662 1663#ifdef ENABLE_REMOTE 1664#include "pcap-rpcap.h" 1665 1666/* 1667 * Extract a substring from a string. 1668 */ 1669static char * 1670get_substring(const char *p, size_t len, char *ebuf) 1671{ 1672 char *token; 1673 1674 token = malloc(len + 1); 1675 if (token == NULL) { 1676 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 1677 errno, "malloc"); 1678 return (NULL); 1679 } 1680 memcpy(token, p, len); 1681 token[len] = '\0'; 1682 return (token); 1683} 1684 1685/* 1686 * Parse a capture source that might be a URL. 1687 * 1688 * If the source is not a URL, *schemep, *userinfop, *hostp, and *portp 1689 * are set to NULL, *pathp is set to point to the source, and 0 is 1690 * returned. 1691 * 1692 * If source is a URL, and the URL refers to a local device (a special 1693 * case of rpcap:), *schemep, *userinfop, *hostp, and *portp are set 1694 * to NULL, *pathp is set to point to the device name, and 0 is returned. 1695 * 1696 * If source is a URL, and it's not a special case that refers to a local 1697 * device, and the parse succeeds: 1698 * 1699 * *schemep is set to point to an allocated string containing the scheme; 1700 * 1701 * if user information is present in the URL, *userinfop is set to point 1702 * to an allocated string containing the user information, otherwise 1703 * it's set to NULL; 1704 * 1705 * if host information is present in the URL, *hostp is set to point 1706 * to an allocated string containing the host information, otherwise 1707 * it's set to NULL; 1708 * 1709 * if a port number is present in the URL, *portp is set to point 1710 * to an allocated string containing the port number, otherwise 1711 * it's set to NULL; 1712 * 1713 * *pathp is set to point to an allocated string containing the 1714 * path; 1715 * 1716 * and 0 is returned. 1717 * 1718 * If the parse fails, ebuf is set to an error string, and -1 is returned. 1719 */ 1720static int 1721pcap_parse_source(const char *source, char **schemep, char **userinfop, 1722 char **hostp, char **portp, char **pathp, char *ebuf) 1723{ 1724 char *colonp; 1725 size_t scheme_len; 1726 char *scheme; 1727 const char *endp; 1728 size_t authority_len; 1729 char *authority; 1730 char *parsep, *atsignp, *bracketp; 1731 char *userinfo, *host, *port, *path; 1732 1733 /* 1734 * Start out returning nothing. 1735 */ 1736 *schemep = NULL; 1737 *userinfop = NULL; 1738 *hostp = NULL; 1739 *portp = NULL; 1740 *pathp = NULL; 1741 1742 /* 1743 * RFC 3986 says: 1744 * 1745 * URI = scheme ":" hier-part [ "?" query ] [ "#" fragment ] 1746 * 1747 * hier-part = "//" authority path-abempty 1748 * / path-absolute 1749 * / path-rootless 1750 * / path-empty 1751 * 1752 * authority = [ userinfo "@" ] host [ ":" port ] 1753 * 1754 * userinfo = *( unreserved / pct-encoded / sub-delims / ":" ) 1755 * 1756 * Step 1: look for the ":" at the end of the scheme. 1757 * A colon in the source is *NOT* sufficient to indicate that 1758 * this is a URL, as interface names on some platforms might 1759 * include colons (e.g., I think some Solaris interfaces 1760 * might). 1761 */ 1762 colonp = strchr(source, ':'); 1763 if (colonp == NULL) { 1764 /* 1765 * The source is the device to open. 1766 * Return a NULL pointer for the scheme, user information, 1767 * host, and port, and return the device as the path. 1768 */ 1769 *pathp = strdup(source); 1770 if (*pathp == NULL) { 1771 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 1772 errno, "malloc"); 1773 return (-1); 1774 } 1775 return (0); 1776 } 1777 1778 /* 1779 * All schemes must have "//" after them, i.e. we only support 1780 * hier-part = "//" authority path-abempty, not 1781 * hier-part = path-absolute 1782 * hier-part = path-rootless 1783 * hier-part = path-empty 1784 * 1785 * We need that in order to distinguish between a local device 1786 * name that happens to contain a colon and a URI. 1787 */ 1788 if (strncmp(colonp + 1, "//", 2) != 0) { 1789 /* 1790 * The source is the device to open. 1791 * Return a NULL pointer for the scheme, user information, 1792 * host, and port, and return the device as the path. 1793 */ 1794 *pathp = strdup(source); 1795 if (*pathp == NULL) { 1796 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 1797 errno, "malloc"); 1798 return (-1); 1799 } 1800 return (0); 1801 } 1802 1803 /* 1804 * XXX - check whether the purported scheme could be a scheme? 1805 */ 1806 1807 /* 1808 * OK, this looks like a URL. 1809 * Get the scheme. 1810 */ 1811 scheme_len = colonp - source; 1812 scheme = malloc(scheme_len + 1); 1813 if (scheme == NULL) { 1814 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 1815 errno, "malloc"); 1816 return (-1); 1817 } 1818 memcpy(scheme, source, scheme_len); 1819 scheme[scheme_len] = '\0'; 1820 1821 /* 1822 * Treat file: specially - take everything after file:// as 1823 * the pathname. 1824 */ 1825 if (pcap_strcasecmp(scheme, "file") == 0) { 1826 *pathp = strdup(colonp + 3); 1827 if (*pathp == NULL) { 1828 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 1829 errno, "malloc"); 1830 free(scheme); 1831 return (-1); 1832 } 1833 *schemep = scheme; 1834 return (0); 1835 } 1836 1837 /* 1838 * The WinPcap documentation says you can specify a local 1839 * interface with "rpcap://{device}"; we special-case 1840 * that here. If the scheme is "rpcap", and there are 1841 * no slashes past the "//", we just return the device. 1842 * 1843 * XXX - %-escaping? 1844 */ 1845 if ((pcap_strcasecmp(scheme, "rpcap") == 0 || 1846 pcap_strcasecmp(scheme, "rpcaps") == 0) && 1847 strchr(colonp + 3, '/') == NULL) { 1848 /* 1849 * Local device. 1850 * 1851 * Return a NULL pointer for the scheme, user information, 1852 * host, and port, and return the device as the path. 1853 */ 1854 free(scheme); 1855 *pathp = strdup(colonp + 3); 1856 if (*pathp == NULL) { 1857 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 1858 errno, "malloc"); 1859 return (-1); 1860 } 1861 return (0); 1862 } 1863 1864 /* 1865 * OK, now start parsing the authority. 1866 * Get token, terminated with / or terminated at the end of 1867 * the string. 1868 */ 1869 authority_len = strcspn(colonp + 3, "/"); 1870 authority = get_substring(colonp + 3, authority_len, ebuf); 1871 if (authority == NULL) { 1872 /* 1873 * Error. 1874 */ 1875 free(scheme); 1876 return (-1); 1877 } 1878 endp = colonp + 3 + authority_len; 1879 1880 /* 1881 * Now carve the authority field into its components. 1882 */ 1883 parsep = authority; 1884 1885 /* 1886 * Is there a userinfo field? 1887 */ 1888 atsignp = strchr(parsep, '@'); 1889 if (atsignp != NULL) { 1890 /* 1891 * Yes. 1892 */ 1893 size_t userinfo_len; 1894 1895 userinfo_len = atsignp - parsep; 1896 userinfo = get_substring(parsep, userinfo_len, ebuf); 1897 if (userinfo == NULL) { 1898 /* 1899 * Error. 1900 */ 1901 free(authority); 1902 free(scheme); 1903 return (-1); 1904 } 1905 parsep = atsignp + 1; 1906 } else { 1907 /* 1908 * No. 1909 */ 1910 userinfo = NULL; 1911 } 1912 1913 /* 1914 * Is there a host field? 1915 */ 1916 if (*parsep == '\0') { 1917 /* 1918 * No; there's no host field or port field. 1919 */ 1920 host = NULL; 1921 port = NULL; 1922 } else { 1923 /* 1924 * Yes. 1925 */ 1926 size_t host_len; 1927 1928 /* 1929 * Is it an IP-literal? 1930 */ 1931 if (*parsep == '[') { 1932 /* 1933 * Yes. 1934 * Treat verything up to the closing square 1935 * bracket as the IP-Literal; we don't worry 1936 * about whether it's a valid IPv6address or 1937 * IPvFuture (or an IPv4address, for that 1938 * matter, just in case we get handed a 1939 * URL with an IPv4 IP-Literal, of the sort 1940 * that pcap_createsrcstr() used to generate, 1941 * and that pcap_parsesrcstr(), in the original 1942 * WinPcap code, accepted). 1943 */ 1944 bracketp = strchr(parsep, ']'); 1945 if (bracketp == NULL) { 1946 /* 1947 * There's no closing square bracket. 1948 */ 1949 snprintf(ebuf, PCAP_ERRBUF_SIZE, 1950 "IP-literal in URL doesn't end with ]"); 1951 free(userinfo); 1952 free(authority); 1953 free(scheme); 1954 return (-1); 1955 } 1956 if (*(bracketp + 1) != '\0' && 1957 *(bracketp + 1) != ':') { 1958 /* 1959 * There's extra crud after the 1960 * closing square bracketn. 1961 */ 1962 snprintf(ebuf, PCAP_ERRBUF_SIZE, 1963 "Extra text after IP-literal in URL"); 1964 free(userinfo); 1965 free(authority); 1966 free(scheme); 1967 return (-1); 1968 } 1969 host_len = (bracketp - 1) - parsep; 1970 host = get_substring(parsep + 1, host_len, ebuf); 1971 if (host == NULL) { 1972 /* 1973 * Error. 1974 */ 1975 free(userinfo); 1976 free(authority); 1977 free(scheme); 1978 return (-1); 1979 } 1980 parsep = bracketp + 1; 1981 } else { 1982 /* 1983 * No. 1984 * Treat everything up to a : or the end of 1985 * the string as the host. 1986 */ 1987 host_len = strcspn(parsep, ":"); 1988 host = get_substring(parsep, host_len, ebuf); 1989 if (host == NULL) { 1990 /* 1991 * Error. 1992 */ 1993 free(userinfo); 1994 free(authority); 1995 free(scheme); 1996 return (-1); 1997 } 1998 parsep = parsep + host_len; 1999 } 2000 2001 /* 2002 * Is there a port field? 2003 */ 2004 if (*parsep == ':') { 2005 /* 2006 * Yes. It's the rest of the authority field. 2007 */ 2008 size_t port_len; 2009 2010 parsep++; 2011 port_len = strlen(parsep); 2012 port = get_substring(parsep, port_len, ebuf); 2013 if (port == NULL) { 2014 /* 2015 * Error. 2016 */ 2017 free(host); 2018 free(userinfo); 2019 free(authority); 2020 free(scheme); 2021 return (-1); 2022 } 2023 } else { 2024 /* 2025 * No. 2026 */ 2027 port = NULL; 2028 } 2029 } 2030 free(authority); 2031 2032 /* 2033 * Everything else is the path. Strip off the leading /. 2034 */ 2035 if (*endp == '\0') 2036 path = strdup(""); 2037 else 2038 path = strdup(endp + 1); 2039 if (path == NULL) { 2040 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 2041 errno, "malloc"); 2042 free(port); 2043 free(host); 2044 free(userinfo); 2045 free(scheme); 2046 return (-1); 2047 } 2048 *schemep = scheme; 2049 *userinfop = userinfo; 2050 *hostp = host; 2051 *portp = port; 2052 *pathp = path; 2053 return (0); 2054} 2055 2056int 2057pcap_createsrcstr_ex(char *source, int type, const char *host, const char *port, 2058 const char *name, unsigned char uses_ssl, char *errbuf) 2059{ 2060 switch (type) { 2061 2062 case PCAP_SRC_FILE: 2063 pcap_strlcpy(source, PCAP_SRC_FILE_STRING, PCAP_BUF_SIZE); 2064 if (name != NULL && *name != '\0') { 2065 pcap_strlcat(source, name, PCAP_BUF_SIZE); 2066 return (0); 2067 } else { 2068 snprintf(errbuf, PCAP_ERRBUF_SIZE, 2069 "The file name cannot be NULL."); 2070 return (-1); 2071 } 2072 2073 case PCAP_SRC_IFREMOTE: 2074 pcap_strlcpy(source, 2075 (uses_ssl ? "rpcaps://" : PCAP_SRC_IF_STRING), 2076 PCAP_BUF_SIZE); 2077 if (host != NULL && *host != '\0') { 2078 if (strchr(host, ':') != NULL) { 2079 /* 2080 * The host name contains a colon, so it's 2081 * probably an IPv6 address, and needs to 2082 * be included in square brackets. 2083 */ 2084 pcap_strlcat(source, "[", PCAP_BUF_SIZE); 2085 pcap_strlcat(source, host, PCAP_BUF_SIZE); 2086 pcap_strlcat(source, "]", PCAP_BUF_SIZE); 2087 } else 2088 pcap_strlcat(source, host, PCAP_BUF_SIZE); 2089 2090 if (port != NULL && *port != '\0') { 2091 pcap_strlcat(source, ":", PCAP_BUF_SIZE); 2092 pcap_strlcat(source, port, PCAP_BUF_SIZE); 2093 } 2094 2095 pcap_strlcat(source, "/", PCAP_BUF_SIZE); 2096 } else { 2097 snprintf(errbuf, PCAP_ERRBUF_SIZE, 2098 "The host name cannot be NULL."); 2099 return (-1); 2100 } 2101 2102 if (name != NULL && *name != '\0') 2103 pcap_strlcat(source, name, PCAP_BUF_SIZE); 2104 2105 return (0); 2106 2107 case PCAP_SRC_IFLOCAL: 2108 pcap_strlcpy(source, PCAP_SRC_IF_STRING, PCAP_BUF_SIZE); 2109 2110 if (name != NULL && *name != '\0') 2111 pcap_strlcat(source, name, PCAP_BUF_SIZE); 2112 2113 return (0); 2114 2115 default: 2116 snprintf(errbuf, PCAP_ERRBUF_SIZE, 2117 "The interface type is not valid."); 2118 return (-1); 2119 } 2120} 2121 2122 2123int 2124pcap_createsrcstr(char *source, int type, const char *host, const char *port, 2125 const char *name, char *errbuf) 2126{ 2127 return (pcap_createsrcstr_ex(source, type, host, port, name, 0, errbuf)); 2128} 2129 2130int 2131pcap_parsesrcstr_ex(const char *source, int *type, char *host, char *port, 2132 char *name, unsigned char *uses_ssl, char *errbuf) 2133{ 2134 char *scheme, *tmpuserinfo, *tmphost, *tmpport, *tmppath; 2135 2136 /* Initialization stuff */ 2137 if (host) 2138 *host = '\0'; 2139 if (port) 2140 *port = '\0'; 2141 if (name) 2142 *name = '\0'; 2143 if (uses_ssl) 2144 *uses_ssl = 0; 2145 2146 /* Parse the source string */ 2147 if (pcap_parse_source(source, &scheme, &tmpuserinfo, &tmphost, 2148 &tmpport, &tmppath, errbuf) == -1) { 2149 /* 2150 * Fail. 2151 */ 2152 return (-1); 2153 } 2154 2155 if (scheme == NULL) { 2156 /* 2157 * Local device. 2158 */ 2159 if (name && tmppath) 2160 pcap_strlcpy(name, tmppath, PCAP_BUF_SIZE); 2161 if (type) 2162 *type = PCAP_SRC_IFLOCAL; 2163 free(tmppath); 2164 free(tmpport); 2165 free(tmphost); 2166 free(tmpuserinfo); 2167 return (0); 2168 } 2169 2170 int is_rpcap = 0; 2171 if (strcmp(scheme, "rpcaps") == 0) { 2172 is_rpcap = 1; 2173 if (uses_ssl) *uses_ssl = 1; 2174 } else if (strcmp(scheme, "rpcap") == 0) { 2175 is_rpcap = 1; 2176 } 2177 2178 if (is_rpcap) { 2179 /* 2180 * rpcap[s]:// 2181 * 2182 * pcap_parse_source() has already handled the case of 2183 * rpcap[s]://device 2184 */ 2185 if (host && tmphost) { 2186 if (tmpuserinfo) 2187 snprintf(host, PCAP_BUF_SIZE, "%s@%s", 2188 tmpuserinfo, tmphost); 2189 else 2190 pcap_strlcpy(host, tmphost, PCAP_BUF_SIZE); 2191 } 2192 if (port && tmpport) 2193 pcap_strlcpy(port, tmpport, PCAP_BUF_SIZE); 2194 if (name && tmppath) 2195 pcap_strlcpy(name, tmppath, PCAP_BUF_SIZE); 2196 if (type) 2197 *type = PCAP_SRC_IFREMOTE; 2198 free(tmppath); 2199 free(tmpport); 2200 free(tmphost); 2201 free(tmpuserinfo); 2202 free(scheme); 2203 return (0); 2204 } 2205 2206 if (strcmp(scheme, "file") == 0) { 2207 /* 2208 * file:// 2209 */ 2210 if (name && tmppath) 2211 pcap_strlcpy(name, tmppath, PCAP_BUF_SIZE); 2212 if (type) 2213 *type = PCAP_SRC_FILE; 2214 free(tmppath); 2215 free(tmpport); 2216 free(tmphost); 2217 free(tmpuserinfo); 2218 free(scheme); 2219 return (0); 2220 } 2221 2222 /* 2223 * Neither rpcap: nor file:; just treat the entire string 2224 * as a local device. 2225 */ 2226 if (name) 2227 pcap_strlcpy(name, source, PCAP_BUF_SIZE); 2228 if (type) 2229 *type = PCAP_SRC_IFLOCAL; 2230 free(tmppath); 2231 free(tmpport); 2232 free(tmphost); 2233 free(tmpuserinfo); 2234 free(scheme); 2235 return (0); 2236} 2237 2238int 2239pcap_parsesrcstr(const char *source, int *type, char *host, char *port, 2240 char *name, char *errbuf) 2241{ 2242 return (pcap_parsesrcstr_ex(source, type, host, port, name, NULL, errbuf)); 2243} 2244#endif 2245 2246pcap_t * 2247pcap_create(const char *device, char *errbuf) 2248{ 2249 size_t i; 2250 int is_theirs; 2251 pcap_t *p; 2252 char *device_str; 2253 2254 /* 2255 * A null device name is equivalent to the "any" device - 2256 * which might not be supported on this platform, but 2257 * this means that you'll get a "not supported" error 2258 * rather than, say, a crash when we try to dereference 2259 * the null pointer. 2260 */ 2261 if (device == NULL) 2262 device_str = strdup("any"); 2263 else { 2264#ifdef _WIN32 2265 /* 2266 * On Windows, for backwards compatibility reasons, 2267 * pcap_lookupdev() returns a pointer to a sequence of 2268 * pairs of UTF-16LE device names and local code page 2269 * description strings. 2270 * 2271 * This means that if a program uses pcap_lookupdev() 2272 * to get a default device, and hands that to an API 2273 * that opens devices, we'll get handed a UTF-16LE 2274 * string, not a string in the local code page. 2275 * 2276 * To work around that, we check whether the string 2277 * looks as if it might be a UTF-16LE string and, if 2278 * so, convert it back to the local code page's 2279 * extended ASCII. 2280 * 2281 * We disable that check in "new API" mode, because: 2282 * 2283 * 1) You *cannot* reliably detect whether a 2284 * string is UTF-16LE or not; "a" could either 2285 * be a one-character ASCII string or the first 2286 * character of a UTF-16LE string. 2287 * 2288 * 2) Doing that test can run past the end of 2289 * the string, if it's a 1-character ASCII 2290 * string 2291 * 2292 * This particular version of this heuristic dates 2293 * back to WinPcap 4.1.1; PacketOpenAdapter() does 2294 * uses the same heuristic, with the exact same 2295 * vulnerability. 2296 * 2297 * That's why we disable this in "new API" mode. 2298 * We keep it around in legacy mode for backwards 2299 * compatibility. 2300 */ 2301 if (!pcap_new_api && device[0] != '\0' && device[1] == '\0') { 2302 size_t length; 2303 2304 length = wcslen((wchar_t *)device); 2305 device_str = (char *)malloc(length + 1); 2306 if (device_str == NULL) { 2307 pcap_fmt_errmsg_for_errno(errbuf, 2308 PCAP_ERRBUF_SIZE, errno, 2309 "malloc"); 2310 return (NULL); 2311 } 2312 2313 snprintf(device_str, length + 1, "%ws", 2314 (const wchar_t *)device); 2315 } else 2316#endif 2317 device_str = strdup(device); 2318 } 2319 if (device_str == NULL) { 2320 pcap_fmt_errmsg_for_errno(errbuf, PCAP_ERRBUF_SIZE, 2321 errno, "malloc"); 2322 return (NULL); 2323 } 2324 2325 /* 2326 * Try each of the non-local-network-interface capture 2327 * source types until we find one that works for this 2328 * device or run out of types. 2329 */ 2330 for (i = 0; capture_source_types[i].create_op != NULL; i++) { 2331 is_theirs = 0; 2332 p = capture_source_types[i].create_op(device_str, errbuf, 2333 &is_theirs); 2334 if (is_theirs) { 2335 /* 2336 * The device name refers to a device of the 2337 * type in question; either it succeeded, 2338 * in which case p refers to a pcap_t to 2339 * later activate for the device, or it 2340 * failed, in which case p is null and we 2341 * should return that to report the failure 2342 * to create. 2343 */ 2344 if (p == NULL) { 2345 /* 2346 * We assume the caller filled in errbuf. 2347 */ 2348 free(device_str); 2349 return (NULL); 2350 } 2351 p->opt.device = device_str; 2352 return (p); 2353 } 2354 } 2355 2356 /* 2357 * OK, try it as a regular network interface. 2358 */ 2359 p = pcap_create_interface(device_str, errbuf); 2360 if (p == NULL) { 2361 /* 2362 * We assume the caller filled in errbuf. 2363 */ 2364 free(device_str); 2365 return (NULL); 2366 } 2367 p->opt.device = device_str; 2368 return (p); 2369} 2370 2371/* 2372 * Set nonblocking mode on an unactivated pcap_t; this sets a flag 2373 * checked by pcap_activate(), which sets the mode after calling 2374 * the activate routine. 2375 */ 2376static int 2377pcap_setnonblock_unactivated(pcap_t *p, int nonblock) 2378{ 2379 p->opt.nonblock = nonblock; 2380 return (0); 2381} 2382 2383static void 2384initialize_ops(pcap_t *p) 2385{ 2386 /* 2387 * Set operation pointers for operations that only work on 2388 * an activated pcap_t to point to a routine that returns 2389 * a "this isn't activated" error. 2390 */ 2391 p->read_op = pcap_read_not_initialized; 2392 p->inject_op = pcap_inject_not_initialized; 2393 p->setfilter_op = pcap_setfilter_not_initialized; 2394 p->setdirection_op = pcap_setdirection_not_initialized; 2395 p->set_datalink_op = pcap_set_datalink_not_initialized; 2396 p->getnonblock_op = pcap_getnonblock_not_initialized; 2397 p->stats_op = pcap_stats_not_initialized; 2398#ifdef _WIN32 2399 p->stats_ex_op = pcap_stats_ex_not_initialized; 2400 p->setbuff_op = pcap_setbuff_not_initialized; 2401 p->setmode_op = pcap_setmode_not_initialized; 2402 p->setmintocopy_op = pcap_setmintocopy_not_initialized; 2403 p->getevent_op = pcap_getevent_not_initialized; 2404 p->oid_get_request_op = pcap_oid_get_request_not_initialized; 2405 p->oid_set_request_op = pcap_oid_set_request_not_initialized; 2406 p->sendqueue_transmit_op = pcap_sendqueue_transmit_not_initialized; 2407 p->setuserbuffer_op = pcap_setuserbuffer_not_initialized; 2408 p->live_dump_op = pcap_live_dump_not_initialized; 2409 p->live_dump_ended_op = pcap_live_dump_ended_not_initialized; 2410 p->get_airpcap_handle_op = pcap_get_airpcap_handle_not_initialized; 2411#endif 2412 2413 /* 2414 * Default cleanup operation - implementations can override 2415 * this, but should call pcap_cleanup_live_common() after 2416 * doing their own additional cleanup. 2417 */ 2418 p->cleanup_op = pcap_cleanup_live_common; 2419 2420 /* 2421 * In most cases, the standard one-shot callback can 2422 * be used for pcap_next()/pcap_next_ex(). 2423 */ 2424 p->oneshot_callback = pcap_oneshot; 2425 2426 /* 2427 * Default breakloop operation - implementations can override 2428 * this, but should call pcap_breakloop_common() before doing 2429 * their own logic. 2430 */ 2431 p->breakloop_op = pcap_breakloop_common; 2432} 2433 2434static pcap_t * 2435pcap_alloc_pcap_t(char *ebuf, size_t total_size, size_t private_offset) 2436{ 2437 char *chunk; 2438 pcap_t *p; 2439 2440 /* 2441 * total_size is the size of a structure containing a pcap_t 2442 * followed by a private structure. 2443 */ 2444 chunk = calloc(total_size, 1); 2445 if (chunk == NULL) { 2446 pcap_fmt_errmsg_for_errno(ebuf, PCAP_ERRBUF_SIZE, 2447 errno, "malloc"); 2448 return (NULL); 2449 } 2450 2451 /* 2452 * Get a pointer to the pcap_t at the beginning. 2453 */ 2454 p = (pcap_t *)chunk; 2455 2456#ifdef _WIN32 2457 p->handle = INVALID_HANDLE_VALUE; /* not opened yet */ 2458#else /* _WIN32 */ 2459 p->fd = -1; /* not opened yet */ 2460#ifndef MSDOS 2461 p->selectable_fd = -1; 2462 p->required_select_timeout = NULL; 2463#endif /* MSDOS */ 2464#endif /* _WIN32 */ 2465 2466 /* 2467 * private_offset is the offset, in bytes, of the private 2468 * data from the beginning of the structure. 2469 * 2470 * Set the pointer to the private data; that's private_offset 2471 * bytes past the pcap_t. 2472 */ 2473 p->priv = (void *)(chunk + private_offset); 2474 2475 return (p); 2476} 2477 2478pcap_t * 2479pcap_create_common(char *ebuf, size_t total_size, size_t private_offset) 2480{ 2481 pcap_t *p; 2482 2483 p = pcap_alloc_pcap_t(ebuf, total_size, private_offset); 2484 if (p == NULL) 2485 return (NULL); 2486 2487 /* 2488 * Default to "can't set rfmon mode"; if it's supported by 2489 * a platform, the create routine that called us can set 2490 * the op to its routine to check whether a particular 2491 * device supports it. 2492 */ 2493 p->can_set_rfmon_op = pcap_cant_set_rfmon; 2494 2495 /* 2496 * If pcap_setnonblock() is called on a not-yet-activated 2497 * pcap_t, default to setting a flag and turning 2498 * on non-blocking mode when activated. 2499 */ 2500 p->setnonblock_op = pcap_setnonblock_unactivated; 2501 2502 initialize_ops(p); 2503 2504 /* put in some defaults*/ 2505 p->snapshot = 0; /* max packet size unspecified */ 2506 p->opt.timeout = 0; /* no timeout specified */ 2507 p->opt.buffer_size = 0; /* use the platform's default */ 2508 p->opt.promisc = 0; 2509 p->opt.rfmon = 0; 2510 p->opt.immediate = 0; 2511 p->opt.tstamp_type = -1; /* default to not setting time stamp type */ 2512 p->opt.tstamp_precision = PCAP_TSTAMP_PRECISION_MICRO; 2513 /* 2514 * Platform-dependent options. 2515 */ 2516#ifdef __linux__ 2517 p->opt.protocol = 0; 2518#endif 2519#ifdef _WIN32 2520 p->opt.nocapture_local = 0; 2521#endif 2522 2523 /* 2524 * Start out with no BPF code generation flags set. 2525 */ 2526 p->bpf_codegen_flags = 0; 2527 2528 return (p); 2529} 2530 2531int 2532pcap_check_activated(pcap_t *p) 2533{ 2534 if (p->activated) { 2535 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "can't perform " 2536 " operation on activated capture"); 2537 return (-1); 2538 } 2539 return (0); 2540} 2541 2542int 2543pcap_set_snaplen(pcap_t *p, int snaplen) 2544{ 2545 if (pcap_check_activated(p)) 2546 return (PCAP_ERROR_ACTIVATED); 2547 p->snapshot = snaplen; 2548 return (0); 2549} 2550 2551int 2552pcap_set_promisc(pcap_t *p, int promisc) 2553{ 2554 if (pcap_check_activated(p)) 2555 return (PCAP_ERROR_ACTIVATED); 2556 p->opt.promisc = promisc; 2557 return (0); 2558} 2559 2560int 2561pcap_set_rfmon(pcap_t *p, int rfmon) 2562{ 2563 if (pcap_check_activated(p)) 2564 return (PCAP_ERROR_ACTIVATED); 2565 p->opt.rfmon = rfmon; 2566 return (0); 2567} 2568 2569int 2570pcap_set_timeout(pcap_t *p, int timeout_ms) 2571{ 2572 if (pcap_check_activated(p)) 2573 return (PCAP_ERROR_ACTIVATED); 2574 p->opt.timeout = timeout_ms; 2575 return (0); 2576} 2577 2578int 2579pcap_set_tstamp_type(pcap_t *p, int tstamp_type) 2580{ 2581 int i; 2582 2583 if (pcap_check_activated(p)) 2584 return (PCAP_ERROR_ACTIVATED); 2585 2586 /* 2587 * The argument should have been u_int, but that's too late 2588 * to change now - it's an API. 2589 */ 2590 if (tstamp_type < 0) 2591 return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP); 2592 2593 /* 2594 * If p->tstamp_type_count is 0, we only support PCAP_TSTAMP_HOST; 2595 * the default time stamp type is PCAP_TSTAMP_HOST. 2596 */ 2597 if (p->tstamp_type_count == 0) { 2598 if (tstamp_type == PCAP_TSTAMP_HOST) { 2599 p->opt.tstamp_type = tstamp_type; 2600 return (0); 2601 } 2602 } else { 2603 /* 2604 * Check whether we claim to support this type of time stamp. 2605 */ 2606 for (i = 0; i < p->tstamp_type_count; i++) { 2607 if (p->tstamp_type_list[i] == (u_int)tstamp_type) { 2608 /* 2609 * Yes. 2610 */ 2611 p->opt.tstamp_type = tstamp_type; 2612 return (0); 2613 } 2614 } 2615 } 2616 2617 /* 2618 * We don't support this type of time stamp. 2619 */ 2620 return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP); 2621} 2622 2623int 2624pcap_set_immediate_mode(pcap_t *p, int immediate) 2625{ 2626 if (pcap_check_activated(p)) 2627 return (PCAP_ERROR_ACTIVATED); 2628 p->opt.immediate = immediate; 2629 return (0); 2630} 2631 2632int 2633pcap_set_buffer_size(pcap_t *p, int buffer_size) 2634{ 2635 if (pcap_check_activated(p)) 2636 return (PCAP_ERROR_ACTIVATED); 2637 if (buffer_size <= 0) { 2638 /* 2639 * Silently ignore invalid values. 2640 */ 2641 return (0); 2642 } 2643 p->opt.buffer_size = buffer_size; 2644 return (0); 2645} 2646 2647int 2648pcap_set_tstamp_precision(pcap_t *p, int tstamp_precision) 2649{ 2650 int i; 2651 2652 if (pcap_check_activated(p)) 2653 return (PCAP_ERROR_ACTIVATED); 2654 2655 /* 2656 * The argument should have been u_int, but that's too late 2657 * to change now - it's an API. 2658 */ 2659 if (tstamp_precision < 0) 2660 return (PCAP_ERROR_TSTAMP_PRECISION_NOTSUP); 2661 2662 /* 2663 * If p->tstamp_precision_count is 0, we only support setting 2664 * the time stamp precision to microsecond precision; every 2665 * pcap module *MUST* support microsecond precision, even if 2666 * it does so by converting the native precision to 2667 * microseconds. 2668 */ 2669 if (p->tstamp_precision_count == 0) { 2670 if (tstamp_precision == PCAP_TSTAMP_PRECISION_MICRO) { 2671 p->opt.tstamp_precision = tstamp_precision; 2672 return (0); 2673 } 2674 } else { 2675 /* 2676 * Check whether we claim to support this precision of 2677 * time stamp. 2678 */ 2679 for (i = 0; i < p->tstamp_precision_count; i++) { 2680 if (p->tstamp_precision_list[i] == (u_int)tstamp_precision) { 2681 /* 2682 * Yes. 2683 */ 2684 p->opt.tstamp_precision = tstamp_precision; 2685 return (0); 2686 } 2687 } 2688 } 2689 2690 /* 2691 * We don't support this time stamp precision. 2692 */ 2693 return (PCAP_ERROR_TSTAMP_PRECISION_NOTSUP); 2694} 2695 2696int 2697pcap_get_tstamp_precision(pcap_t *p) 2698{ 2699 return (p->opt.tstamp_precision); 2700} 2701 2702int 2703pcap_activate(pcap_t *p) 2704{ 2705 int status; 2706 2707 /* 2708 * Catch attempts to re-activate an already-activated 2709 * pcap_t; this should, for example, catch code that 2710 * calls pcap_open_live() followed by pcap_activate(), 2711 * as some code that showed up in a Stack Exchange 2712 * question did. 2713 */ 2714 if (pcap_check_activated(p)) 2715 return (PCAP_ERROR_ACTIVATED); 2716 status = p->activate_op(p); 2717 if (status >= 0) { 2718 /* 2719 * If somebody requested non-blocking mode before 2720 * calling pcap_activate(), turn it on now. 2721 */ 2722 if (p->opt.nonblock) { 2723 status = p->setnonblock_op(p, 1); 2724 if (status < 0) { 2725 /* 2726 * Failed. Undo everything done by 2727 * the activate operation. 2728 */ 2729 p->cleanup_op(p); 2730 initialize_ops(p); 2731 return (status); 2732 } 2733 } 2734 p->activated = 1; 2735 } else { 2736 if (p->errbuf[0] == '\0') { 2737 /* 2738 * No error message supplied by the activate routine; 2739 * for the benefit of programs that don't specially 2740 * handle errors other than PCAP_ERROR, return the 2741 * error message corresponding to the status. 2742 */ 2743 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s", 2744 pcap_statustostr(status)); 2745 } 2746 2747 /* 2748 * Undo any operation pointer setting, etc. done by 2749 * the activate operation. 2750 */ 2751 initialize_ops(p); 2752 } 2753 return (status); 2754} 2755 2756pcap_t * 2757pcap_open_live(const char *device, int snaplen, int promisc, int to_ms, char *errbuf) 2758{ 2759 pcap_t *p; 2760 int status; 2761#ifdef ENABLE_REMOTE 2762 char host[PCAP_BUF_SIZE + 1]; 2763 char port[PCAP_BUF_SIZE + 1]; 2764 char name[PCAP_BUF_SIZE + 1]; 2765 int srctype; 2766 2767 /* 2768 * A null device name is equivalent to the "any" device - 2769 * which might not be supported on this platform, but 2770 * this means that you'll get a "not supported" error 2771 * rather than, say, a crash when we try to dereference 2772 * the null pointer. 2773 */ 2774 if (device == NULL) 2775 device = "any"; 2776 2777 /* 2778 * Retrofit - we have to make older applications compatible with 2779 * remote capture. 2780 * So we're calling pcap_open_remote() from here; this is a very 2781 * dirty hack. 2782 * Obviously, we cannot exploit all the new features; for instance, 2783 * we cannot send authentication, we cannot use a UDP data connection, 2784 * and so on. 2785 */ 2786 if (pcap_parsesrcstr(device, &srctype, host, port, name, errbuf)) 2787 return (NULL); 2788 2789 if (srctype == PCAP_SRC_IFREMOTE) { 2790 /* 2791 * Although we already have host, port and iface, we prefer 2792 * to pass only 'device' to pcap_open_rpcap(), so that it has 2793 * to call pcap_parsesrcstr() again. 2794 * This is less optimized, but much clearer. 2795 */ 2796 return (pcap_open_rpcap(device, snaplen, 2797 promisc ? PCAP_OPENFLAG_PROMISCUOUS : 0, to_ms, 2798 NULL, errbuf)); 2799 } 2800 if (srctype == PCAP_SRC_FILE) { 2801 snprintf(errbuf, PCAP_ERRBUF_SIZE, "unknown URL scheme \"file\""); 2802 return (NULL); 2803 } 2804 if (srctype == PCAP_SRC_IFLOCAL) { 2805 /* 2806 * If it starts with rpcap://, that refers to a local device 2807 * (no host part in the URL). Remove the rpcap://, and 2808 * fall through to the regular open path. 2809 */ 2810 if (strncmp(device, PCAP_SRC_IF_STRING, strlen(PCAP_SRC_IF_STRING)) == 0) { 2811 size_t len = strlen(device) - strlen(PCAP_SRC_IF_STRING) + 1; 2812 2813 if (len > 0) 2814 device += strlen(PCAP_SRC_IF_STRING); 2815 } 2816 } 2817#endif /* ENABLE_REMOTE */ 2818 2819 p = pcap_create(device, errbuf); 2820 if (p == NULL) 2821 return (NULL); 2822 status = pcap_set_snaplen(p, snaplen); 2823 if (status < 0) 2824 goto fail; 2825 status = pcap_set_promisc(p, promisc); 2826 if (status < 0) 2827 goto fail; 2828 status = pcap_set_timeout(p, to_ms); 2829 if (status < 0) 2830 goto fail; 2831 /* 2832 * Mark this as opened with pcap_open_live(), so that, for 2833 * example, we show the full list of DLT_ values, rather 2834 * than just the ones that are compatible with capturing 2835 * when not in monitor mode. That allows existing applications 2836 * to work the way they used to work, but allows new applications 2837 * that know about the new open API to, for example, find out the 2838 * DLT_ values that they can select without changing whether 2839 * the adapter is in monitor mode or not. 2840 */ 2841 p->oldstyle = 1; 2842 status = pcap_activate(p); 2843 if (status < 0) 2844 goto fail; 2845 return (p); 2846fail: 2847 if (status == PCAP_ERROR) { 2848 /* 2849 * Another buffer is a bit cumbersome, but it avoids 2850 * -Wformat-truncation. 2851 */ 2852 char trimbuf[PCAP_ERRBUF_SIZE - 5]; /* 2 bytes shorter */ 2853 2854 pcap_strlcpy(trimbuf, p->errbuf, sizeof(trimbuf)); 2855 snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %.*s", device, 2856 PCAP_ERRBUF_SIZE - 3, trimbuf); 2857 } else if (status == PCAP_ERROR_NO_SUCH_DEVICE || 2858 status == PCAP_ERROR_PERM_DENIED || 2859 status == PCAP_ERROR_PROMISC_PERM_DENIED) { 2860 /* 2861 * Only show the additional message if it's not 2862 * empty. 2863 */ 2864 if (p->errbuf[0] != '\0') { 2865 /* 2866 * Idem. 2867 */ 2868 char trimbuf[PCAP_ERRBUF_SIZE - 8]; /* 2 bytes shorter */ 2869 2870 pcap_strlcpy(trimbuf, p->errbuf, sizeof(trimbuf)); 2871 snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s (%.*s)", 2872 device, pcap_statustostr(status), 2873 PCAP_ERRBUF_SIZE - 6, trimbuf); 2874 } else { 2875 snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", 2876 device, pcap_statustostr(status)); 2877 } 2878 } else { 2879 snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", device, 2880 pcap_statustostr(status)); 2881 } 2882 pcap_close(p); 2883 return (NULL); 2884} 2885 2886pcap_t * 2887pcap_open_offline_common(char *ebuf, size_t total_size, size_t private_offset) 2888{ 2889 pcap_t *p; 2890 2891 p = pcap_alloc_pcap_t(ebuf, total_size, private_offset); 2892 if (p == NULL) 2893 return (NULL); 2894 2895 p->opt.tstamp_precision = PCAP_TSTAMP_PRECISION_MICRO; 2896 2897 return (p); 2898} 2899 2900int 2901pcap_dispatch(pcap_t *p, int cnt, pcap_handler callback, u_char *user) 2902{ 2903 return (p->read_op(p, cnt, callback, user)); 2904} 2905 2906int 2907pcap_loop(pcap_t *p, int cnt, pcap_handler callback, u_char *user) 2908{ 2909 register int n; 2910 2911 for (;;) { 2912 if (p->rfile != NULL) { 2913 /* 2914 * 0 means EOF, so don't loop if we get 0. 2915 */ 2916 n = pcap_offline_read(p, cnt, callback, user); 2917 } else { 2918 /* 2919 * XXX keep reading until we get something 2920 * (or an error occurs) 2921 */ 2922 do { 2923 n = p->read_op(p, cnt, callback, user); 2924 } while (n == 0); 2925 } 2926 if (n <= 0) 2927 return (n); 2928 if (!PACKET_COUNT_IS_UNLIMITED(cnt)) { 2929 cnt -= n; 2930 if (cnt <= 0) 2931 return (0); 2932 } 2933 } 2934} 2935 2936/* 2937 * Force the loop in "pcap_read()" or "pcap_read_offline()" to terminate. 2938 */ 2939void 2940pcap_breakloop(pcap_t *p) 2941{ 2942 p->breakloop_op(p); 2943} 2944 2945int 2946pcap_datalink(pcap_t *p) 2947{ 2948 if (!p->activated) 2949 return (PCAP_ERROR_NOT_ACTIVATED); 2950 return (p->linktype); 2951} 2952 2953int 2954pcap_datalink_ext(pcap_t *p) 2955{ 2956 if (!p->activated) 2957 return (PCAP_ERROR_NOT_ACTIVATED); 2958 return (p->linktype_ext); 2959} 2960 2961int 2962pcap_list_datalinks(pcap_t *p, int **dlt_buffer) 2963{ 2964 if (!p->activated) 2965 return (PCAP_ERROR_NOT_ACTIVATED); 2966 if (p->dlt_count == 0) { 2967 /* 2968 * We couldn't fetch the list of DLTs, which means 2969 * this platform doesn't support changing the 2970 * DLT for an interface. Return a list of DLTs 2971 * containing only the DLT this device supports. 2972 */ 2973 *dlt_buffer = (int*)malloc(sizeof(**dlt_buffer)); 2974 if (*dlt_buffer == NULL) { 2975 pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf), 2976 errno, "malloc"); 2977 return (PCAP_ERROR); 2978 } 2979 **dlt_buffer = p->linktype; 2980 return (1); 2981 } else { 2982 *dlt_buffer = (int*)calloc(sizeof(**dlt_buffer), p->dlt_count); 2983 if (*dlt_buffer == NULL) { 2984 pcap_fmt_errmsg_for_errno(p->errbuf, sizeof(p->errbuf), 2985 errno, "malloc"); 2986 return (PCAP_ERROR); 2987 } 2988 (void)memcpy(*dlt_buffer, p->dlt_list, 2989 sizeof(**dlt_buffer) * p->dlt_count); 2990 return (p->dlt_count); 2991 } 2992} 2993 2994/* 2995 * In Windows, you might have a library built with one version of the 2996 * C runtime library and an application built with another version of 2997 * the C runtime library, which means that the library might use one 2998 * version of malloc() and free() and the application might use another 2999 * version of malloc() and free(). If so, that means something 3000 * allocated by the library cannot be freed by the application, so we 3001 * need to have a pcap_free_datalinks() routine to free up the list 3002 * allocated by pcap_list_datalinks(), even though it's just a wrapper 3003 * around free(). 3004 */ 3005void 3006pcap_free_datalinks(int *dlt_list) 3007{ 3008 free(dlt_list); 3009} 3010 3011int 3012pcap_set_datalink(pcap_t *p, int dlt) 3013{ 3014 int i; 3015 const char *dlt_name; 3016 3017 if (dlt < 0) 3018 goto unsupported; 3019 3020 if (p->dlt_count == 0 || p->set_datalink_op == NULL) { 3021 /* 3022 * We couldn't fetch the list of DLTs, or we don't 3023 * have a "set datalink" operation, which means 3024 * this platform doesn't support changing the 3025 * DLT for an interface. Check whether the new 3026 * DLT is the one this interface supports. 3027 */ 3028 if (p->linktype != dlt) 3029 goto unsupported; 3030 3031 /* 3032 * It is, so there's nothing we need to do here. 3033 */ 3034 return (0); 3035 } 3036 for (i = 0; i < p->dlt_count; i++) 3037 if (p->dlt_list[i] == (u_int)dlt) 3038 break; 3039 if (i >= p->dlt_count) 3040 goto unsupported; 3041 if (p->dlt_count == 2 && p->dlt_list[0] == DLT_EN10MB && 3042 dlt == DLT_DOCSIS) { 3043 /* 3044 * This is presumably an Ethernet device, as the first 3045 * link-layer type it offers is DLT_EN10MB, and the only 3046 * other type it offers is DLT_DOCSIS. That means that 3047 * we can't tell the driver to supply DOCSIS link-layer 3048 * headers - we're just pretending that's what we're 3049 * getting, as, presumably, we're capturing on a dedicated 3050 * link to a Cisco Cable Modem Termination System, and 3051 * it's putting raw DOCSIS frames on the wire inside low-level 3052 * Ethernet framing. 3053 */ 3054 p->linktype = dlt; 3055 return (0); 3056 } 3057 if (p->set_datalink_op(p, dlt) == -1) 3058 return (-1); 3059 p->linktype = dlt; 3060 return (0); 3061 3062unsupported: 3063 dlt_name = pcap_datalink_val_to_name(dlt); 3064 if (dlt_name != NULL) { 3065 (void) snprintf(p->errbuf, sizeof(p->errbuf), 3066 "%s is not one of the DLTs supported by this device", 3067 dlt_name); 3068 } else { 3069 (void) snprintf(p->errbuf, sizeof(p->errbuf), 3070 "DLT %d is not one of the DLTs supported by this device", 3071 dlt); 3072 } 3073 return (-1); 3074} 3075 3076/* 3077 * This array is designed for mapping upper and lower case letter 3078 * together for a case independent comparison. The mappings are 3079 * based upon ascii character sequences. 3080 */ 3081static const u_char charmap[] = { 3082 (u_char)'\000', (u_char)'\001', (u_char)'\002', (u_char)'\003', 3083 (u_char)'\004', (u_char)'\005', (u_char)'\006', (u_char)'\007', 3084 (u_char)'\010', (u_char)'\011', (u_char)'\012', (u_char)'\013', 3085 (u_char)'\014', (u_char)'\015', (u_char)'\016', (u_char)'\017', 3086 (u_char)'\020', (u_char)'\021', (u_char)'\022', (u_char)'\023', 3087 (u_char)'\024', (u_char)'\025', (u_char)'\026', (u_char)'\027', 3088 (u_char)'\030', (u_char)'\031', (u_char)'\032', (u_char)'\033', 3089 (u_char)'\034', (u_char)'\035', (u_char)'\036', (u_char)'\037', 3090 (u_char)'\040', (u_char)'\041', (u_char)'\042', (u_char)'\043', 3091 (u_char)'\044', (u_char)'\045', (u_char)'\046', (u_char)'\047', 3092 (u_char)'\050', (u_char)'\051', (u_char)'\052', (u_char)'\053', 3093 (u_char)'\054', (u_char)'\055', (u_char)'\056', (u_char)'\057', 3094 (u_char)'\060', (u_char)'\061', (u_char)'\062', (u_char)'\063', 3095 (u_char)'\064', (u_char)'\065', (u_char)'\066', (u_char)'\067', 3096 (u_char)'\070', (u_char)'\071', (u_char)'\072', (u_char)'\073', 3097 (u_char)'\074', (u_char)'\075', (u_char)'\076', (u_char)'\077', 3098 (u_char)'\100', (u_char)'\141', (u_char)'\142', (u_char)'\143', 3099 (u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147', 3100 (u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153', 3101 (u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157', 3102 (u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163', 3103 (u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167', 3104 (u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\133', 3105 (u_char)'\134', (u_char)'\135', (u_char)'\136', (u_char)'\137', 3106 (u_char)'\140', (u_char)'\141', (u_char)'\142', (u_char)'\143', 3107 (u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147', 3108 (u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153', 3109 (u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157', 3110 (u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163', 3111 (u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167', 3112 (u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\173', 3113 (u_char)'\174', (u_char)'\175', (u_char)'\176', (u_char)'\177', 3114 (u_char)'\200', (u_char)'\201', (u_char)'\202', (u_char)'\203', 3115 (u_char)'\204', (u_char)'\205', (u_char)'\206', (u_char)'\207', 3116 (u_char)'\210', (u_char)'\211', (u_char)'\212', (u_char)'\213', 3117 (u_char)'\214', (u_char)'\215', (u_char)'\216', (u_char)'\217', 3118 (u_char)'\220', (u_char)'\221', (u_char)'\222', (u_char)'\223', 3119 (u_char)'\224', (u_char)'\225', (u_char)'\226', (u_char)'\227', 3120 (u_char)'\230', (u_char)'\231', (u_char)'\232', (u_char)'\233', 3121 (u_char)'\234', (u_char)'\235', (u_char)'\236', (u_char)'\237', 3122 (u_char)'\240', (u_char)'\241', (u_char)'\242', (u_char)'\243', 3123 (u_char)'\244', (u_char)'\245', (u_char)'\246', (u_char)'\247', 3124 (u_char)'\250', (u_char)'\251', (u_char)'\252', (u_char)'\253', 3125 (u_char)'\254', (u_char)'\255', (u_char)'\256', (u_char)'\257', 3126 (u_char)'\260', (u_char)'\261', (u_char)'\262', (u_char)'\263', 3127 (u_char)'\264', (u_char)'\265', (u_char)'\266', (u_char)'\267', 3128 (u_char)'\270', (u_char)'\271', (u_char)'\272', (u_char)'\273', 3129 (u_char)'\274', (u_char)'\275', (u_char)'\276', (u_char)'\277', 3130 (u_char)'\300', (u_char)'\341', (u_char)'\342', (u_char)'\343', 3131 (u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347', 3132 (u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353', 3133 (u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357', 3134 (u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363', 3135 (u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367', 3136 (u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\333', 3137 (u_char)'\334', (u_char)'\335', (u_char)'\336', (u_char)'\337', 3138 (u_char)'\340', (u_char)'\341', (u_char)'\342', (u_char)'\343', 3139 (u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347', 3140 (u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353', 3141 (u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357', 3142 (u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363', 3143 (u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367', 3144 (u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\373', 3145 (u_char)'\374', (u_char)'\375', (u_char)'\376', (u_char)'\377', 3146}; 3147 3148int 3149pcap_strcasecmp(const char *s1, const char *s2) 3150{ 3151 register const u_char *cm = charmap, 3152 *us1 = (const u_char *)s1, 3153 *us2 = (const u_char *)s2; 3154 3155 while (cm[*us1] == cm[*us2++]) 3156 if (*us1++ == '\0') 3157 return(0); 3158 return (cm[*us1] - cm[*--us2]); 3159} 3160 3161struct dlt_choice { 3162 const char *name; 3163 const char *description; 3164 int dlt; 3165}; 3166 3167#define DLT_CHOICE(code, description) { #code, description, DLT_ ## code } 3168#define DLT_CHOICE_SENTINEL { NULL, NULL, 0 } 3169 3170static struct dlt_choice dlt_choices[] = { 3171 DLT_CHOICE(NULL, "BSD loopback"), 3172 DLT_CHOICE(EN10MB, "Ethernet"), 3173 DLT_CHOICE(IEEE802, "Token ring"), 3174 DLT_CHOICE(ARCNET, "BSD ARCNET"), 3175 DLT_CHOICE(SLIP, "SLIP"), 3176 DLT_CHOICE(PPP, "PPP"), 3177 DLT_CHOICE(FDDI, "FDDI"), 3178 DLT_CHOICE(ATM_RFC1483, "RFC 1483 LLC-encapsulated ATM"), 3179 DLT_CHOICE(RAW, "Raw IP"), 3180 DLT_CHOICE(SLIP_BSDOS, "BSD/OS SLIP"), 3181 DLT_CHOICE(PPP_BSDOS, "BSD/OS PPP"), 3182 DLT_CHOICE(ATM_CLIP, "Linux Classical IP over ATM"), 3183 DLT_CHOICE(PPP_SERIAL, "PPP over serial"), 3184 DLT_CHOICE(PPP_ETHER, "PPPoE"), 3185 DLT_CHOICE(SYMANTEC_FIREWALL, "Symantec Firewall"), 3186 DLT_CHOICE(C_HDLC, "Cisco HDLC"), 3187 DLT_CHOICE(IEEE802_11, "802.11"), 3188 DLT_CHOICE(FRELAY, "Frame Relay"), 3189 DLT_CHOICE(LOOP, "OpenBSD loopback"), 3190 DLT_CHOICE(ENC, "OpenBSD encapsulated IP"), 3191 DLT_CHOICE(LINUX_SLL, "Linux cooked v1"), 3192 DLT_CHOICE(LTALK, "Localtalk"), 3193 DLT_CHOICE(PFLOG, "OpenBSD pflog file"), 3194 DLT_CHOICE(PFSYNC, "Packet filter state syncing"), 3195 DLT_CHOICE(PRISM_HEADER, "802.11 plus Prism header"), 3196 DLT_CHOICE(IP_OVER_FC, "RFC 2625 IP-over-Fibre Channel"), 3197 DLT_CHOICE(SUNATM, "Sun raw ATM"), 3198 DLT_CHOICE(IEEE802_11_RADIO, "802.11 plus radiotap header"), 3199 DLT_CHOICE(ARCNET_LINUX, "Linux ARCNET"), 3200 DLT_CHOICE(JUNIPER_MLPPP, "Juniper Multi-Link PPP"), 3201 DLT_CHOICE(JUNIPER_MLFR, "Juniper Multi-Link Frame Relay"), 3202 DLT_CHOICE(JUNIPER_ES, "Juniper Encryption Services PIC"), 3203 DLT_CHOICE(JUNIPER_GGSN, "Juniper GGSN PIC"), 3204 DLT_CHOICE(JUNIPER_MFR, "Juniper FRF.16 Frame Relay"), 3205 DLT_CHOICE(JUNIPER_ATM2, "Juniper ATM2 PIC"), 3206 DLT_CHOICE(JUNIPER_SERVICES, "Juniper Advanced Services PIC"), 3207 DLT_CHOICE(JUNIPER_ATM1, "Juniper ATM1 PIC"), 3208 DLT_CHOICE(APPLE_IP_OVER_IEEE1394, "Apple IP-over-IEEE 1394"), 3209 DLT_CHOICE(MTP2_WITH_PHDR, "SS7 MTP2 with Pseudo-header"), 3210 DLT_CHOICE(MTP2, "SS7 MTP2"), 3211 DLT_CHOICE(MTP3, "SS7 MTP3"), 3212 DLT_CHOICE(SCCP, "SS7 SCCP"), 3213 DLT_CHOICE(DOCSIS, "DOCSIS"), 3214 DLT_CHOICE(LINUX_IRDA, "Linux IrDA"), 3215 DLT_CHOICE(IEEE802_11_RADIO_AVS, "802.11 plus AVS radio information header"), 3216 DLT_CHOICE(JUNIPER_MONITOR, "Juniper Passive Monitor PIC"), 3217 DLT_CHOICE(BACNET_MS_TP, "BACnet MS/TP"), 3218 DLT_CHOICE(PPP_PPPD, "PPP for pppd, with direction flag"), 3219 DLT_CHOICE(JUNIPER_PPPOE, "Juniper PPPoE"), 3220 DLT_CHOICE(JUNIPER_PPPOE_ATM, "Juniper PPPoE/ATM"), 3221 DLT_CHOICE(GPRS_LLC, "GPRS LLC"), 3222 DLT_CHOICE(GPF_T, "GPF-T"), 3223 DLT_CHOICE(GPF_F, "GPF-F"), 3224 DLT_CHOICE(JUNIPER_PIC_PEER, "Juniper PIC Peer"), 3225 DLT_CHOICE(ERF_ETH, "Ethernet with Endace ERF header"), 3226 DLT_CHOICE(ERF_POS, "Packet-over-SONET with Endace ERF header"), 3227 DLT_CHOICE(LINUX_LAPD, "Linux vISDN LAPD"), 3228 DLT_CHOICE(JUNIPER_ETHER, "Juniper Ethernet"), 3229 DLT_CHOICE(JUNIPER_PPP, "Juniper PPP"), 3230 DLT_CHOICE(JUNIPER_FRELAY, "Juniper Frame Relay"), 3231 DLT_CHOICE(JUNIPER_CHDLC, "Juniper C-HDLC"), 3232 DLT_CHOICE(MFR, "FRF.16 Frame Relay"), 3233 DLT_CHOICE(JUNIPER_VP, "Juniper Voice PIC"), 3234 DLT_CHOICE(A429, "Arinc 429"), 3235 DLT_CHOICE(A653_ICM, "Arinc 653 Interpartition Communication"), 3236 DLT_CHOICE(USB_FREEBSD, "USB with FreeBSD header"), 3237 DLT_CHOICE(BLUETOOTH_HCI_H4, "Bluetooth HCI UART transport layer"), 3238 DLT_CHOICE(IEEE802_16_MAC_CPS, "IEEE 802.16 MAC Common Part Sublayer"), 3239 DLT_CHOICE(USB_LINUX, "USB with Linux header"), 3240 DLT_CHOICE(CAN20B, "Controller Area Network (CAN) v. 2.0B"), 3241 DLT_CHOICE(IEEE802_15_4_LINUX, "IEEE 802.15.4 with Linux padding"), 3242 DLT_CHOICE(PPI, "Per-Packet Information"), 3243 DLT_CHOICE(IEEE802_16_MAC_CPS_RADIO, "IEEE 802.16 MAC Common Part Sublayer plus radiotap header"), 3244 DLT_CHOICE(JUNIPER_ISM, "Juniper Integrated Service Module"), 3245 DLT_CHOICE(IEEE802_15_4, "IEEE 802.15.4 with FCS"), 3246 DLT_CHOICE(SITA, "SITA pseudo-header"), 3247 DLT_CHOICE(ERF, "Endace ERF header"), 3248 DLT_CHOICE(RAIF1, "Ethernet with u10 Networks pseudo-header"), 3249 DLT_CHOICE(IPMB_KONTRON, "IPMB with Kontron pseudo-header"), 3250 DLT_CHOICE(JUNIPER_ST, "Juniper Secure Tunnel"), 3251 DLT_CHOICE(BLUETOOTH_HCI_H4_WITH_PHDR, "Bluetooth HCI UART transport layer plus pseudo-header"), 3252 DLT_CHOICE(AX25_KISS, "AX.25 with KISS header"), 3253 DLT_CHOICE(IPMB_LINUX, "IPMB with Linux/Pigeon Point pseudo-header"), 3254 DLT_CHOICE(IEEE802_15_4_NONASK_PHY, "IEEE 802.15.4 with non-ASK PHY data"), 3255 DLT_CHOICE(MPLS, "MPLS with label as link-layer header"), 3256 DLT_CHOICE(LINUX_EVDEV, "Linux evdev events"), 3257 DLT_CHOICE(USB_LINUX_MMAPPED, "USB with padded Linux header"), 3258 DLT_CHOICE(DECT, "DECT"), 3259 DLT_CHOICE(AOS, "AOS Space Data Link protocol"), 3260 DLT_CHOICE(WIHART, "Wireless HART"), 3261 DLT_CHOICE(FC_2, "Fibre Channel FC-2"), 3262 DLT_CHOICE(FC_2_WITH_FRAME_DELIMS, "Fibre Channel FC-2 with frame delimiters"), 3263 DLT_CHOICE(IPNET, "Solaris ipnet"), 3264 DLT_CHOICE(CAN_SOCKETCAN, "CAN-bus with SocketCAN headers"), 3265 DLT_CHOICE(IPV4, "Raw IPv4"), 3266 DLT_CHOICE(IPV6, "Raw IPv6"), 3267 DLT_CHOICE(IEEE802_15_4_NOFCS, "IEEE 802.15.4 without FCS"), 3268 DLT_CHOICE(DBUS, "D-Bus"), 3269 DLT_CHOICE(JUNIPER_VS, "Juniper Virtual Server"), 3270 DLT_CHOICE(JUNIPER_SRX_E2E, "Juniper SRX E2E"), 3271 DLT_CHOICE(JUNIPER_FIBRECHANNEL, "Juniper Fibre Channel"), 3272 DLT_CHOICE(DVB_CI, "DVB-CI"), 3273 DLT_CHOICE(MUX27010, "MUX27010"), 3274 DLT_CHOICE(STANAG_5066_D_PDU, "STANAG 5066 D_PDUs"), 3275 DLT_CHOICE(JUNIPER_ATM_CEMIC, "Juniper ATM CEMIC"), 3276 DLT_CHOICE(NFLOG, "Linux netfilter log messages"), 3277 DLT_CHOICE(NETANALYZER, "Ethernet with Hilscher netANALYZER pseudo-header"), 3278 DLT_CHOICE(NETANALYZER_TRANSPARENT, "Ethernet with Hilscher netANALYZER pseudo-header and with preamble and SFD"), 3279 DLT_CHOICE(IPOIB, "RFC 4391 IP-over-Infiniband"), 3280 DLT_CHOICE(MPEG_2_TS, "MPEG-2 transport stream"), 3281 DLT_CHOICE(NG40, "ng40 protocol tester Iub/Iur"), 3282 DLT_CHOICE(NFC_LLCP, "NFC LLCP PDUs with pseudo-header"), 3283 DLT_CHOICE(INFINIBAND, "InfiniBand"), 3284 DLT_CHOICE(SCTP, "SCTP"), 3285 DLT_CHOICE(USBPCAP, "USB with USBPcap header"), 3286 DLT_CHOICE(RTAC_SERIAL, "Schweitzer Engineering Laboratories RTAC packets"), 3287 DLT_CHOICE(BLUETOOTH_LE_LL, "Bluetooth Low Energy air interface"), 3288 DLT_CHOICE(NETLINK, "Linux netlink"), 3289 DLT_CHOICE(BLUETOOTH_LINUX_MONITOR, "Bluetooth Linux Monitor"), 3290 DLT_CHOICE(BLUETOOTH_BREDR_BB, "Bluetooth Basic Rate/Enhanced Data Rate baseband packets"), 3291 DLT_CHOICE(BLUETOOTH_LE_LL_WITH_PHDR, "Bluetooth Low Energy air interface with pseudo-header"), 3292 DLT_CHOICE(PROFIBUS_DL, "PROFIBUS data link layer"), 3293 DLT_CHOICE(PKTAP, "Apple DLT_PKTAP"), 3294 DLT_CHOICE(EPON, "Ethernet with 802.3 Clause 65 EPON preamble"), 3295 DLT_CHOICE(IPMI_HPM_2, "IPMI trace packets"), 3296 DLT_CHOICE(ZWAVE_R1_R2, "Z-Wave RF profile R1 and R2 packets"), 3297 DLT_CHOICE(ZWAVE_R3, "Z-Wave RF profile R3 packets"), 3298 DLT_CHOICE(WATTSTOPPER_DLM, "WattStopper Digital Lighting Management (DLM) and Legrand Nitoo Open protocol"), 3299 DLT_CHOICE(ISO_14443, "ISO 14443 messages"), 3300 DLT_CHOICE(RDS, "IEC 62106 Radio Data System groups"), 3301 DLT_CHOICE(USB_DARWIN, "USB with Darwin header"), 3302 DLT_CHOICE(OPENFLOW, "OpenBSD DLT_OPENFLOW"), 3303 DLT_CHOICE(SDLC, "IBM SDLC frames"), 3304 DLT_CHOICE(TI_LLN_SNIFFER, "TI LLN sniffer frames"), 3305 DLT_CHOICE(VSOCK, "Linux vsock"), 3306 DLT_CHOICE(NORDIC_BLE, "Nordic Semiconductor Bluetooth LE sniffer frames"), 3307 DLT_CHOICE(DOCSIS31_XRA31, "Excentis XRA-31 DOCSIS 3.1 RF sniffer frames"), 3308 DLT_CHOICE(ETHERNET_MPACKET, "802.3br mPackets"), 3309 DLT_CHOICE(DISPLAYPORT_AUX, "DisplayPort AUX channel monitoring data"), 3310 DLT_CHOICE(LINUX_SLL2, "Linux cooked v2"), 3311 DLT_CHOICE(OPENVIZSLA, "OpenVizsla USB"), 3312 DLT_CHOICE(EBHSCR, "Elektrobit High Speed Capture and Replay (EBHSCR)"), 3313 DLT_CHOICE(VPP_DISPATCH, "VPP graph dispatch tracer"), 3314 DLT_CHOICE(DSA_TAG_BRCM, "Broadcom tag"), 3315 DLT_CHOICE(DSA_TAG_BRCM_PREPEND, "Broadcom tag (prepended)"), 3316 DLT_CHOICE(IEEE802_15_4_TAP, "IEEE 802.15.4 with pseudo-header"), 3317 DLT_CHOICE(DSA_TAG_DSA, "Marvell DSA"), 3318 DLT_CHOICE(DSA_TAG_EDSA, "Marvell EDSA"), 3319 DLT_CHOICE(ELEE, "ELEE lawful intercept packets"), 3320 DLT_CHOICE(Z_WAVE_SERIAL, "Z-Wave serial frames between host and chip"), 3321 DLT_CHOICE(USB_2_0, "USB 2.0/1.1/1.0 as transmitted over the cable"), 3322 DLT_CHOICE(ATSC_ALP, "ATSC Link-Layer Protocol packets"), 3323 DLT_CHOICE_SENTINEL 3324}; 3325 3326int 3327pcap_datalink_name_to_val(const char *name) 3328{ 3329 int i; 3330 3331 for (i = 0; dlt_choices[i].name != NULL; i++) { 3332 if (pcap_strcasecmp(dlt_choices[i].name, name) == 0) 3333 return (dlt_choices[i].dlt); 3334 } 3335 return (-1); 3336} 3337 3338const char * 3339pcap_datalink_val_to_name(int dlt) 3340{ 3341 int i; 3342 3343 for (i = 0; dlt_choices[i].name != NULL; i++) { 3344 if (dlt_choices[i].dlt == dlt) 3345 return (dlt_choices[i].name); 3346 } 3347 return (NULL); 3348} 3349 3350const char * 3351pcap_datalink_val_to_description(int dlt) 3352{ 3353 int i; 3354 3355 for (i = 0; dlt_choices[i].name != NULL; i++) { 3356 if (dlt_choices[i].dlt == dlt) 3357 return (dlt_choices[i].description); 3358 } 3359 return (NULL); 3360} 3361 3362const char * 3363pcap_datalink_val_to_description_or_dlt(int dlt) 3364{ 3365 static char unkbuf[40]; 3366 const char *description; 3367 3368 description = pcap_datalink_val_to_description(dlt); 3369 if (description != NULL) { 3370 return description; 3371 } else { 3372 (void)snprintf(unkbuf, sizeof(unkbuf), "DLT %d", dlt); 3373 return unkbuf; 3374 } 3375} 3376 3377struct tstamp_type_choice { 3378 const char *name; 3379 const char *description; 3380 int type; 3381}; 3382 3383static struct tstamp_type_choice tstamp_type_choices[] = { 3384 { "host", "Host", PCAP_TSTAMP_HOST }, 3385 { "host_lowprec", "Host, low precision", PCAP_TSTAMP_HOST_LOWPREC }, 3386 { "host_hiprec", "Host, high precision", PCAP_TSTAMP_HOST_HIPREC }, 3387 { "adapter", "Adapter", PCAP_TSTAMP_ADAPTER }, 3388 { "adapter_unsynced", "Adapter, not synced with system time", PCAP_TSTAMP_ADAPTER_UNSYNCED }, 3389 { "host_hiprec_unsynced", "Host, high precision, not synced with system time", PCAP_TSTAMP_HOST_HIPREC_UNSYNCED }, 3390 { NULL, NULL, 0 } 3391}; 3392 3393int 3394pcap_tstamp_type_name_to_val(const char *name) 3395{ 3396 int i; 3397 3398 for (i = 0; tstamp_type_choices[i].name != NULL; i++) { 3399 if (pcap_strcasecmp(tstamp_type_choices[i].name, name) == 0) 3400 return (tstamp_type_choices[i].type); 3401 } 3402 return (PCAP_ERROR); 3403} 3404 3405const char * 3406pcap_tstamp_type_val_to_name(int tstamp_type) 3407{ 3408 int i; 3409 3410 for (i = 0; tstamp_type_choices[i].name != NULL; i++) { 3411 if (tstamp_type_choices[i].type == tstamp_type) 3412 return (tstamp_type_choices[i].name); 3413 } 3414 return (NULL); 3415} 3416 3417const char * 3418pcap_tstamp_type_val_to_description(int tstamp_type) 3419{ 3420 int i; 3421 3422 for (i = 0; tstamp_type_choices[i].name != NULL; i++) { 3423 if (tstamp_type_choices[i].type == tstamp_type) 3424 return (tstamp_type_choices[i].description); 3425 } 3426 return (NULL); 3427} 3428 3429int 3430pcap_snapshot(pcap_t *p) 3431{ 3432 if (!p->activated) 3433 return (PCAP_ERROR_NOT_ACTIVATED); 3434 return (p->snapshot); 3435} 3436 3437int 3438pcap_is_swapped(pcap_t *p) 3439{ 3440 if (!p->activated) 3441 return (PCAP_ERROR_NOT_ACTIVATED); 3442 return (p->swapped); 3443} 3444 3445int 3446pcap_major_version(pcap_t *p) 3447{ 3448 if (!p->activated) 3449 return (PCAP_ERROR_NOT_ACTIVATED); 3450 return (p->version_major); 3451} 3452 3453int 3454pcap_minor_version(pcap_t *p) 3455{ 3456 if (!p->activated) 3457 return (PCAP_ERROR_NOT_ACTIVATED); 3458 return (p->version_minor); 3459} 3460 3461int 3462pcap_bufsize(pcap_t *p) 3463{ 3464 if (!p->activated) 3465 return (PCAP_ERROR_NOT_ACTIVATED); 3466 return (p->bufsize); 3467} 3468 3469FILE * 3470pcap_file(pcap_t *p) 3471{ 3472 return (p->rfile); 3473} 3474 3475#ifdef _WIN32 3476int 3477pcap_fileno(pcap_t *p) 3478{ 3479 if (p->handle != INVALID_HANDLE_VALUE) { 3480 /* 3481 * This is a bogus and now-deprecated API; we 3482 * squelch the narrowing warning for the cast 3483 * from HANDLE to intptr_t. If Windows programmmers 3484 * need to get at the HANDLE for a pcap_t, *if* 3485 * there is one, they should request such a 3486 * routine (and be prepared for it to return 3487 * INVALID_HANDLE_VALUE). 3488 */ 3489DIAG_OFF_NARROWING 3490 return ((int)(intptr_t)p->handle); 3491DIAG_ON_NARROWING 3492 } else 3493 return (PCAP_ERROR); 3494} 3495#else /* _WIN32 */ 3496int 3497pcap_fileno(pcap_t *p) 3498{ 3499 return (p->fd); 3500} 3501#endif /* _WIN32 */ 3502 3503#if !defined(_WIN32) && !defined(MSDOS) 3504int 3505pcap_get_selectable_fd(pcap_t *p) 3506{ 3507 return (p->selectable_fd); 3508} 3509 3510const struct timeval * 3511pcap_get_required_select_timeout(pcap_t *p) 3512{ 3513 return (p->required_select_timeout); 3514} 3515#endif 3516 3517void 3518pcap_perror(pcap_t *p, const char *prefix) 3519{ 3520 fprintf(stderr, "%s: %s\n", prefix, p->errbuf); 3521} 3522 3523char * 3524pcap_geterr(pcap_t *p) 3525{ 3526 return (p->errbuf); 3527} 3528 3529int 3530pcap_getnonblock(pcap_t *p, char *errbuf) 3531{ 3532 int ret; 3533 3534 ret = p->getnonblock_op(p); 3535 if (ret == -1) { 3536 /* 3537 * The get nonblock operation sets p->errbuf; this 3538 * function *shouldn't* have had a separate errbuf 3539 * argument, as it didn't need one, but I goofed 3540 * when adding it. 3541 * 3542 * We copy the error message to errbuf, so callers 3543 * can find it in either place. 3544 */ 3545 pcap_strlcpy(errbuf, p->errbuf, PCAP_ERRBUF_SIZE); 3546 } 3547 return (ret); 3548} 3549 3550/* 3551 * Get the current non-blocking mode setting, under the assumption that 3552 * it's just the standard POSIX non-blocking flag. 3553 */ 3554#if !defined(_WIN32) && !defined(MSDOS) 3555int 3556pcap_getnonblock_fd(pcap_t *p) 3557{ 3558 int fdflags; 3559 3560 fdflags = fcntl(p->fd, F_GETFL, 0); 3561 if (fdflags == -1) { 3562 pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, 3563 errno, "F_GETFL"); 3564 return (-1); 3565 } 3566 if (fdflags & O_NONBLOCK) 3567 return (1); 3568 else 3569 return (0); 3570} 3571#endif 3572 3573int 3574pcap_setnonblock(pcap_t *p, int nonblock, char *errbuf) 3575{ 3576 int ret; 3577 3578 ret = p->setnonblock_op(p, nonblock); 3579 if (ret == -1) { 3580 /* 3581 * The set nonblock operation sets p->errbuf; this 3582 * function *shouldn't* have had a separate errbuf 3583 * argument, as it didn't need one, but I goofed 3584 * when adding it. 3585 * 3586 * We copy the error message to errbuf, so callers 3587 * can find it in either place. 3588 */ 3589 pcap_strlcpy(errbuf, p->errbuf, PCAP_ERRBUF_SIZE); 3590 } 3591 return (ret); 3592} 3593 3594#if !defined(_WIN32) && !defined(MSDOS) 3595/* 3596 * Set non-blocking mode, under the assumption that it's just the 3597 * standard POSIX non-blocking flag. (This can be called by the 3598 * per-platform non-blocking-mode routine if that routine also 3599 * needs to do some additional work.) 3600 */ 3601int 3602pcap_setnonblock_fd(pcap_t *p, int nonblock) 3603{ 3604 int fdflags; 3605 3606 fdflags = fcntl(p->fd, F_GETFL, 0); 3607 if (fdflags == -1) { 3608 pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, 3609 errno, "F_GETFL"); 3610 return (-1); 3611 } 3612 if (nonblock) 3613 fdflags |= O_NONBLOCK; 3614 else 3615 fdflags &= ~O_NONBLOCK; 3616 if (fcntl(p->fd, F_SETFL, fdflags) == -1) { 3617 pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, 3618 errno, "F_SETFL"); 3619 return (-1); 3620 } 3621 return (0); 3622} 3623#endif 3624 3625/* 3626 * Generate error strings for PCAP_ERROR_ and PCAP_WARNING_ values. 3627 */ 3628const char * 3629pcap_statustostr(int errnum) 3630{ 3631 static char ebuf[15+10+1]; 3632 3633 switch (errnum) { 3634 3635 case PCAP_WARNING: 3636 return("Generic warning"); 3637 3638 case PCAP_WARNING_TSTAMP_TYPE_NOTSUP: 3639 return ("That type of time stamp is not supported by that device"); 3640 3641 case PCAP_WARNING_PROMISC_NOTSUP: 3642 return ("That device doesn't support promiscuous mode"); 3643 3644 case PCAP_ERROR: 3645 return("Generic error"); 3646 3647 case PCAP_ERROR_BREAK: 3648 return("Loop terminated by pcap_breakloop"); 3649 3650 case PCAP_ERROR_NOT_ACTIVATED: 3651 return("The pcap_t has not been activated"); 3652 3653 case PCAP_ERROR_ACTIVATED: 3654 return ("The setting can't be changed after the pcap_t is activated"); 3655 3656 case PCAP_ERROR_NO_SUCH_DEVICE: 3657 return ("No such device exists"); 3658 3659 case PCAP_ERROR_RFMON_NOTSUP: 3660 return ("That device doesn't support monitor mode"); 3661 3662 case PCAP_ERROR_NOT_RFMON: 3663 return ("That operation is supported only in monitor mode"); 3664 3665 case PCAP_ERROR_PERM_DENIED: 3666 return ("You don't have permission to perform this capture on that device"); 3667 3668 case PCAP_ERROR_IFACE_NOT_UP: 3669 return ("That device is not up"); 3670 3671 case PCAP_ERROR_CANTSET_TSTAMP_TYPE: 3672 return ("That device doesn't support setting the time stamp type"); 3673 3674 case PCAP_ERROR_PROMISC_PERM_DENIED: 3675 return ("You don't have permission to capture in promiscuous mode on that device"); 3676 3677 case PCAP_ERROR_TSTAMP_PRECISION_NOTSUP: 3678 return ("That device doesn't support that time stamp precision"); 3679 } 3680 (void)snprintf(ebuf, sizeof ebuf, "Unknown error: %d", errnum); 3681 return(ebuf); 3682} 3683 3684/* 3685 * Not all systems have strerror(). 3686 */ 3687const char * 3688pcap_strerror(int errnum) 3689{ 3690#ifdef HAVE_STRERROR 3691#ifdef _WIN32 3692 static char errbuf[PCAP_ERRBUF_SIZE]; 3693 errno_t err = strerror_s(errbuf, PCAP_ERRBUF_SIZE, errnum); 3694 3695 if (err != 0) /* err = 0 if successful */ 3696 pcap_strlcpy(errbuf, "strerror_s() error", PCAP_ERRBUF_SIZE); 3697 return (errbuf); 3698#else 3699 return (strerror(errnum)); 3700#endif /* _WIN32 */ 3701#else 3702 extern int sys_nerr; 3703 extern const char *const sys_errlist[]; 3704 static char errbuf[PCAP_ERRBUF_SIZE]; 3705 3706 if ((unsigned int)errnum < sys_nerr) 3707 return ((char *)sys_errlist[errnum]); 3708 (void)snprintf(errbuf, sizeof errbuf, "Unknown error: %d", errnum); 3709 return (errbuf); 3710#endif 3711} 3712 3713int 3714pcap_setfilter(pcap_t *p, struct bpf_program *fp) 3715{ 3716 return (p->setfilter_op(p, fp)); 3717} 3718 3719/* 3720 * Set direction flag, which controls whether we accept only incoming 3721 * packets, only outgoing packets, or both. 3722 * Note that, depending on the platform, some or all direction arguments 3723 * might not be supported. 3724 */ 3725int 3726pcap_setdirection(pcap_t *p, pcap_direction_t d) 3727{ 3728 if (p->setdirection_op == NULL) { 3729 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 3730 "Setting direction is not supported on this device"); 3731 return (-1); 3732 } else { 3733 switch (d) { 3734 3735 case PCAP_D_IN: 3736 case PCAP_D_OUT: 3737 case PCAP_D_INOUT: 3738 /* 3739 * Valid direction. 3740 */ 3741 return (p->setdirection_op(p, d)); 3742 3743 default: 3744 /* 3745 * Invalid direction. 3746 */ 3747 snprintf(p->errbuf, sizeof(p->errbuf), 3748 "Invalid direction"); 3749 return (-1); 3750 } 3751 } 3752} 3753 3754int 3755pcap_stats(pcap_t *p, struct pcap_stat *ps) 3756{ 3757 return (p->stats_op(p, ps)); 3758} 3759 3760#ifdef _WIN32 3761struct pcap_stat * 3762pcap_stats_ex(pcap_t *p, int *pcap_stat_size) 3763{ 3764 return (p->stats_ex_op(p, pcap_stat_size)); 3765} 3766 3767int 3768pcap_setbuff(pcap_t *p, int dim) 3769{ 3770 return (p->setbuff_op(p, dim)); 3771} 3772 3773int 3774pcap_setmode(pcap_t *p, int mode) 3775{ 3776 return (p->setmode_op(p, mode)); 3777} 3778 3779int 3780pcap_setmintocopy(pcap_t *p, int size) 3781{ 3782 return (p->setmintocopy_op(p, size)); 3783} 3784 3785HANDLE 3786pcap_getevent(pcap_t *p) 3787{ 3788 return (p->getevent_op(p)); 3789} 3790 3791int 3792pcap_oid_get_request(pcap_t *p, bpf_u_int32 oid, void *data, size_t *lenp) 3793{ 3794 return (p->oid_get_request_op(p, oid, data, lenp)); 3795} 3796 3797int 3798pcap_oid_set_request(pcap_t *p, bpf_u_int32 oid, const void *data, size_t *lenp) 3799{ 3800 return (p->oid_set_request_op(p, oid, data, lenp)); 3801} 3802 3803pcap_send_queue * 3804pcap_sendqueue_alloc(u_int memsize) 3805{ 3806 pcap_send_queue *tqueue; 3807 3808 /* Allocate the queue */ 3809 tqueue = (pcap_send_queue *)malloc(sizeof(pcap_send_queue)); 3810 if (tqueue == NULL){ 3811 return (NULL); 3812 } 3813 3814 /* Allocate the buffer */ 3815 tqueue->buffer = (char *)malloc(memsize); 3816 if (tqueue->buffer == NULL) { 3817 free(tqueue); 3818 return (NULL); 3819 } 3820 3821 tqueue->maxlen = memsize; 3822 tqueue->len = 0; 3823 3824 return (tqueue); 3825} 3826 3827void 3828pcap_sendqueue_destroy(pcap_send_queue *queue) 3829{ 3830 free(queue->buffer); 3831 free(queue); 3832} 3833 3834int 3835pcap_sendqueue_queue(pcap_send_queue *queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data) 3836{ 3837 if (queue->len + sizeof(struct pcap_pkthdr) + pkt_header->caplen > queue->maxlen){ 3838 return (-1); 3839 } 3840 3841 /* Copy the pcap_pkthdr header*/ 3842 memcpy(queue->buffer + queue->len, pkt_header, sizeof(struct pcap_pkthdr)); 3843 queue->len += sizeof(struct pcap_pkthdr); 3844 3845 /* copy the packet */ 3846 memcpy(queue->buffer + queue->len, pkt_data, pkt_header->caplen); 3847 queue->len += pkt_header->caplen; 3848 3849 return (0); 3850} 3851 3852u_int 3853pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue *queue, int sync) 3854{ 3855 return (p->sendqueue_transmit_op(p, queue, sync)); 3856} 3857 3858int 3859pcap_setuserbuffer(pcap_t *p, int size) 3860{ 3861 return (p->setuserbuffer_op(p, size)); 3862} 3863 3864int 3865pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks) 3866{ 3867 return (p->live_dump_op(p, filename, maxsize, maxpacks)); 3868} 3869 3870int 3871pcap_live_dump_ended(pcap_t *p, int sync) 3872{ 3873 return (p->live_dump_ended_op(p, sync)); 3874} 3875 3876PAirpcapHandle 3877pcap_get_airpcap_handle(pcap_t *p) 3878{ 3879 PAirpcapHandle handle; 3880 3881 handle = p->get_airpcap_handle_op(p); 3882 if (handle == NULL) { 3883 (void)snprintf(p->errbuf, sizeof(p->errbuf), 3884 "This isn't an AirPcap device"); 3885 } 3886 return (handle); 3887} 3888#endif 3889 3890/* 3891 * On some platforms, we need to clean up promiscuous or monitor mode 3892 * when we close a device - and we want that to happen even if the 3893 * application just exits without explicitl closing devices. 3894 * On those platforms, we need to register a "close all the pcaps" 3895 * routine to be called when we exit, and need to maintain a list of 3896 * pcaps that need to be closed to clean up modes. 3897 * 3898 * XXX - not thread-safe. 3899 */ 3900 3901/* 3902 * List of pcaps on which we've done something that needs to be 3903 * cleaned up. 3904 * If there are any such pcaps, we arrange to call "pcap_close_all()" 3905 * when we exit, and have it close all of them. 3906 */ 3907static struct pcap *pcaps_to_close; 3908 3909/* 3910 * TRUE if we've already called "atexit()" to cause "pcap_close_all()" to 3911 * be called on exit. 3912 */ 3913static int did_atexit; 3914 3915static void 3916pcap_close_all(void) 3917{ 3918 struct pcap *handle; 3919 3920 while ((handle = pcaps_to_close) != NULL) { 3921 pcap_close(handle); 3922 3923 /* 3924 * If a pcap module adds a pcap_t to the "close all" 3925 * list by calling pcap_add_to_pcaps_to_close(), it 3926 * must have a cleanup routine that removes it from the 3927 * list, by calling pcap_remove_from_pcaps_to_close(), 3928 * and must make that cleanup routine the cleanup_op 3929 * for the pcap_t. 3930 * 3931 * That means that, after pcap_close() - which calls 3932 * the cleanup_op for the pcap_t - the pcap_t must 3933 * have been removed from the list, so pcaps_to_close 3934 * must not be equal to handle. 3935 * 3936 * We check for that, and abort if handle is still 3937 * at the head of the list, to prevent infinite loops. 3938 */ 3939 if (pcaps_to_close == handle) 3940 abort(); 3941 } 3942} 3943 3944int 3945pcap_do_addexit(pcap_t *p) 3946{ 3947 /* 3948 * If we haven't already done so, arrange to have 3949 * "pcap_close_all()" called when we exit. 3950 */ 3951 if (!did_atexit) { 3952 if (atexit(pcap_close_all) != 0) { 3953 /* 3954 * "atexit()" failed; let our caller know. 3955 */ 3956 pcap_strlcpy(p->errbuf, "atexit failed", PCAP_ERRBUF_SIZE); 3957 return (0); 3958 } 3959 did_atexit = 1; 3960 } 3961 return (1); 3962} 3963 3964void 3965pcap_add_to_pcaps_to_close(pcap_t *p) 3966{ 3967 p->next = pcaps_to_close; 3968 pcaps_to_close = p; 3969} 3970 3971void 3972pcap_remove_from_pcaps_to_close(pcap_t *p) 3973{ 3974 pcap_t *pc, *prevpc; 3975 3976 for (pc = pcaps_to_close, prevpc = NULL; pc != NULL; 3977 prevpc = pc, pc = pc->next) { 3978 if (pc == p) { 3979 /* 3980 * Found it. Remove it from the list. 3981 */ 3982 if (prevpc == NULL) { 3983 /* 3984 * It was at the head of the list. 3985 */ 3986 pcaps_to_close = pc->next; 3987 } else { 3988 /* 3989 * It was in the middle of the list. 3990 */ 3991 prevpc->next = pc->next; 3992 } 3993 break; 3994 } 3995 } 3996} 3997 3998void 3999pcap_breakloop_common(pcap_t *p) 4000{ 4001 p->break_loop = 1; 4002} 4003 4004 4005void 4006pcap_cleanup_live_common(pcap_t *p) 4007{ 4008 if (p->opt.device != NULL) { 4009 free(p->opt.device); 4010 p->opt.device = NULL; 4011 } 4012 if (p->buffer != NULL) { 4013 free(p->buffer); 4014 p->buffer = NULL; 4015 } 4016 if (p->dlt_list != NULL) { 4017 free(p->dlt_list); 4018 p->dlt_list = NULL; 4019 p->dlt_count = 0; 4020 } 4021 if (p->tstamp_type_list != NULL) { 4022 free(p->tstamp_type_list); 4023 p->tstamp_type_list = NULL; 4024 p->tstamp_type_count = 0; 4025 } 4026 if (p->tstamp_precision_list != NULL) { 4027 free(p->tstamp_precision_list); 4028 p->tstamp_precision_list = NULL; 4029 p->tstamp_precision_count = 0; 4030 } 4031 pcap_freecode(&p->fcode); 4032#if !defined(_WIN32) && !defined(MSDOS) 4033 if (p->fd >= 0) { 4034 close(p->fd); 4035 p->fd = -1; 4036 } 4037 p->selectable_fd = -1; 4038#endif 4039} 4040 4041/* 4042 * API compatible with WinPcap's "send a packet" routine - returns -1 4043 * on error, 0 otherwise. 4044 * 4045 * XXX - what if we get a short write? 4046 */ 4047int 4048pcap_sendpacket(pcap_t *p, const u_char *buf, int size) 4049{ 4050 if (size <= 0) { 4051 pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, 4052 errno, "The number of bytes to be sent must be positive"); 4053 return (PCAP_ERROR); 4054 } 4055 4056 if (p->inject_op(p, buf, size) == -1) 4057 return (-1); 4058 return (0); 4059} 4060 4061/* 4062 * API compatible with OpenBSD's "send a packet" routine - returns -1 on 4063 * error, number of bytes written otherwise. 4064 */ 4065int 4066pcap_inject(pcap_t *p, const void *buf, size_t size) 4067{ 4068 /* 4069 * We return the number of bytes written, so the number of 4070 * bytes to write must fit in an int. 4071 */ 4072 if (size > INT_MAX) { 4073 pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, 4074 errno, "More than %d bytes cannot be injected", INT_MAX); 4075 return (PCAP_ERROR); 4076 } 4077 4078 if (size == 0) { 4079 pcap_fmt_errmsg_for_errno(p->errbuf, PCAP_ERRBUF_SIZE, 4080 errno, "The number of bytes to be injected must not be zero"); 4081 return (PCAP_ERROR); 4082 } 4083 4084 return (p->inject_op(p, buf, (int)size)); 4085} 4086 4087void 4088pcap_close(pcap_t *p) 4089{ 4090 p->cleanup_op(p); 4091 free(p); 4092} 4093 4094/* 4095 * Helpers for safely loading code at run time. 4096 * Currently Windows-only. 4097 */ 4098#ifdef _WIN32 4099// 4100// This wrapper around loadlibrary appends the system folder (usually 4101// C:\Windows\System32) to the relative path of the DLL, so that the DLL 4102// is always loaded from an absolute path (it's no longer possible to 4103// load modules from the application folder). 4104// This solves the DLL Hijacking issue discovered in August 2010: 4105// 4106// https://blog.rapid7.com/2010/08/23/exploiting-dll-hijacking-flaws/ 4107// https://blog.rapid7.com/2010/08/23/application-dll-load-hijacking/ 4108// (the purported Rapid7 blog post link in the first of those two links 4109// is broken; the second of those links works.) 4110// 4111// If any links there are broken from all the content shuffling Rapid& 4112// did, see archived versions of the posts at their original homes, at 4113// 4114// https://web.archive.org/web/20110122175058/http://blog.metasploit.com/2010/08/exploiting-dll-hijacking-flaws.html 4115// https://web.archive.org/web/20100828112111/http://blog.rapid7.com/?p=5325 4116// 4117pcap_code_handle_t 4118pcap_load_code(const char *name) 4119{ 4120 /* 4121 * XXX - should this work in UTF-16LE rather than in the local 4122 * ANSI code page? 4123 */ 4124 CHAR path[MAX_PATH]; 4125 CHAR fullFileName[MAX_PATH]; 4126 UINT res; 4127 HMODULE hModule = NULL; 4128 4129 do 4130 { 4131 res = GetSystemDirectoryA(path, MAX_PATH); 4132 4133 if (res == 0) { 4134 // 4135 // some bad failure occurred; 4136 // 4137 break; 4138 } 4139 4140 if (res > MAX_PATH) { 4141 // 4142 // the buffer was not big enough 4143 // 4144 SetLastError(ERROR_INSUFFICIENT_BUFFER); 4145 break; 4146 } 4147 4148 if (res + 1 + strlen(name) + 1 < MAX_PATH) { 4149 memcpy(fullFileName, path, res * sizeof(TCHAR)); 4150 fullFileName[res] = '\\'; 4151 memcpy(&fullFileName[res + 1], name, (strlen(name) + 1) * sizeof(TCHAR)); 4152 4153 hModule = LoadLibraryA(fullFileName); 4154 } else 4155 SetLastError(ERROR_INSUFFICIENT_BUFFER); 4156 4157 } while(FALSE); 4158 4159 return hModule; 4160} 4161 4162pcap_funcptr_t 4163pcap_find_function(pcap_code_handle_t code, const char *func) 4164{ 4165 return (GetProcAddress(code, func)); 4166} 4167#endif 4168 4169/* 4170 * Given a BPF program, a pcap_pkthdr structure for a packet, and the raw 4171 * data for the packet, check whether the packet passes the filter. 4172 * Returns the return value of the filter program, which will be zero if 4173 * the packet doesn't pass and non-zero if the packet does pass. 4174 */ 4175int 4176pcap_offline_filter(const struct bpf_program *fp, const struct pcap_pkthdr *h, 4177 const u_char *pkt) 4178{ 4179 const struct bpf_insn *fcode = fp->bf_insns; 4180 4181 if (fcode != NULL) 4182 return (pcap_filter(fcode, pkt, h->len, h->caplen)); 4183 else 4184 return (0); 4185} 4186 4187static int 4188pcap_can_set_rfmon_dead(pcap_t *p) 4189{ 4190 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4191 "Rfmon mode doesn't apply on a pcap_open_dead pcap_t"); 4192 return (PCAP_ERROR); 4193} 4194 4195static int 4196pcap_read_dead(pcap_t *p, int cnt _U_, pcap_handler callback _U_, 4197 u_char *user _U_) 4198{ 4199 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4200 "Packets aren't available from a pcap_open_dead pcap_t"); 4201 return (-1); 4202} 4203 4204static void 4205pcap_breakloop_dead(pcap_t *p _U_) 4206{ 4207 /* 4208 * A "dead" pcap_t is just a placeholder to use in order to 4209 * compile a filter to BPF code or to open a savefile for 4210 * writing. It doesn't support any operations, including 4211 * capturing or reading packets, so there will never be a 4212 * get-packets loop in progress to break out *of*. 4213 * 4214 * As such, this routine doesn't need to do anything. 4215 */ 4216} 4217 4218static int 4219pcap_inject_dead(pcap_t *p, const void *buf _U_, int size _U_) 4220{ 4221 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4222 "Packets can't be sent on a pcap_open_dead pcap_t"); 4223 return (-1); 4224} 4225 4226static int 4227pcap_setfilter_dead(pcap_t *p, struct bpf_program *fp _U_) 4228{ 4229 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4230 "A filter cannot be set on a pcap_open_dead pcap_t"); 4231 return (-1); 4232} 4233 4234static int 4235pcap_setdirection_dead(pcap_t *p, pcap_direction_t d _U_) 4236{ 4237 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4238 "The packet direction cannot be set on a pcap_open_dead pcap_t"); 4239 return (-1); 4240} 4241 4242static int 4243pcap_set_datalink_dead(pcap_t *p, int dlt _U_) 4244{ 4245 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4246 "The link-layer header type cannot be set on a pcap_open_dead pcap_t"); 4247 return (-1); 4248} 4249 4250static int 4251pcap_getnonblock_dead(pcap_t *p) 4252{ 4253 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4254 "A pcap_open_dead pcap_t does not have a non-blocking mode setting"); 4255 return (-1); 4256} 4257 4258static int 4259pcap_setnonblock_dead(pcap_t *p, int nonblock _U_) 4260{ 4261 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4262 "A pcap_open_dead pcap_t does not have a non-blocking mode setting"); 4263 return (-1); 4264} 4265 4266static int 4267pcap_stats_dead(pcap_t *p, struct pcap_stat *ps _U_) 4268{ 4269 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4270 "Statistics aren't available from a pcap_open_dead pcap_t"); 4271 return (-1); 4272} 4273 4274#ifdef _WIN32 4275static struct pcap_stat * 4276pcap_stats_ex_dead(pcap_t *p, int *pcap_stat_size _U_) 4277{ 4278 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4279 "Statistics aren't available from a pcap_open_dead pcap_t"); 4280 return (NULL); 4281} 4282 4283static int 4284pcap_setbuff_dead(pcap_t *p, int dim _U_) 4285{ 4286 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4287 "The kernel buffer size cannot be set on a pcap_open_dead pcap_t"); 4288 return (-1); 4289} 4290 4291static int 4292pcap_setmode_dead(pcap_t *p, int mode _U_) 4293{ 4294 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4295 "impossible to set mode on a pcap_open_dead pcap_t"); 4296 return (-1); 4297} 4298 4299static int 4300pcap_setmintocopy_dead(pcap_t *p, int size _U_) 4301{ 4302 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4303 "The mintocopy parameter cannot be set on a pcap_open_dead pcap_t"); 4304 return (-1); 4305} 4306 4307static HANDLE 4308pcap_getevent_dead(pcap_t *p) 4309{ 4310 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4311 "A pcap_open_dead pcap_t has no event handle"); 4312 return (INVALID_HANDLE_VALUE); 4313} 4314 4315static int 4316pcap_oid_get_request_dead(pcap_t *p, bpf_u_int32 oid _U_, void *data _U_, 4317 size_t *lenp _U_) 4318{ 4319 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4320 "An OID get request cannot be performed on a pcap_open_dead pcap_t"); 4321 return (PCAP_ERROR); 4322} 4323 4324static int 4325pcap_oid_set_request_dead(pcap_t *p, bpf_u_int32 oid _U_, const void *data _U_, 4326 size_t *lenp _U_) 4327{ 4328 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4329 "An OID set request cannot be performed on a pcap_open_dead pcap_t"); 4330 return (PCAP_ERROR); 4331} 4332 4333static u_int 4334pcap_sendqueue_transmit_dead(pcap_t *p, pcap_send_queue *queue _U_, 4335 int sync _U_) 4336{ 4337 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4338 "Packets cannot be transmitted on a pcap_open_dead pcap_t"); 4339 return (0); 4340} 4341 4342static int 4343pcap_setuserbuffer_dead(pcap_t *p, int size _U_) 4344{ 4345 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4346 "The user buffer cannot be set on a pcap_open_dead pcap_t"); 4347 return (-1); 4348} 4349 4350static int 4351pcap_live_dump_dead(pcap_t *p, char *filename _U_, int maxsize _U_, 4352 int maxpacks _U_) 4353{ 4354 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4355 "Live packet dumping cannot be performed on a pcap_open_dead pcap_t"); 4356 return (-1); 4357} 4358 4359static int 4360pcap_live_dump_ended_dead(pcap_t *p, int sync _U_) 4361{ 4362 snprintf(p->errbuf, PCAP_ERRBUF_SIZE, 4363 "Live packet dumping cannot be performed on a pcap_open_dead pcap_t"); 4364 return (-1); 4365} 4366 4367static PAirpcapHandle 4368pcap_get_airpcap_handle_dead(pcap_t *p _U_) 4369{ 4370 return (NULL); 4371} 4372#endif /* _WIN32 */ 4373 4374static void 4375pcap_cleanup_dead(pcap_t *p _U_) 4376{ 4377 /* Nothing to do. */ 4378} 4379 4380pcap_t * 4381pcap_open_dead_with_tstamp_precision(int linktype, int snaplen, u_int precision) 4382{ 4383 pcap_t *p; 4384 4385 switch (precision) { 4386 4387 case PCAP_TSTAMP_PRECISION_MICRO: 4388 case PCAP_TSTAMP_PRECISION_NANO: 4389 break; 4390 4391 default: 4392 /* 4393 * This doesn't really matter, but we don't have any way 4394 * to report particular errors, so the only failure we 4395 * should have is a memory allocation failure. Just 4396 * pick microsecond precision. 4397 */ 4398 precision = PCAP_TSTAMP_PRECISION_MICRO; 4399 break; 4400 } 4401 p = malloc(sizeof(*p)); 4402 if (p == NULL) 4403 return NULL; 4404 memset (p, 0, sizeof(*p)); 4405 p->snapshot = snaplen; 4406 p->linktype = linktype; 4407 p->opt.tstamp_precision = precision; 4408 p->can_set_rfmon_op = pcap_can_set_rfmon_dead; 4409 p->read_op = pcap_read_dead; 4410 p->inject_op = pcap_inject_dead; 4411 p->setfilter_op = pcap_setfilter_dead; 4412 p->setdirection_op = pcap_setdirection_dead; 4413 p->set_datalink_op = pcap_set_datalink_dead; 4414 p->getnonblock_op = pcap_getnonblock_dead; 4415 p->setnonblock_op = pcap_setnonblock_dead; 4416 p->stats_op = pcap_stats_dead; 4417#ifdef _WIN32 4418 p->stats_ex_op = pcap_stats_ex_dead; 4419 p->setbuff_op = pcap_setbuff_dead; 4420 p->setmode_op = pcap_setmode_dead; 4421 p->setmintocopy_op = pcap_setmintocopy_dead; 4422 p->getevent_op = pcap_getevent_dead; 4423 p->oid_get_request_op = pcap_oid_get_request_dead; 4424 p->oid_set_request_op = pcap_oid_set_request_dead; 4425 p->sendqueue_transmit_op = pcap_sendqueue_transmit_dead; 4426 p->setuserbuffer_op = pcap_setuserbuffer_dead; 4427 p->live_dump_op = pcap_live_dump_dead; 4428 p->live_dump_ended_op = pcap_live_dump_ended_dead; 4429 p->get_airpcap_handle_op = pcap_get_airpcap_handle_dead; 4430#endif 4431 p->breakloop_op = pcap_breakloop_dead; 4432 p->cleanup_op = pcap_cleanup_dead; 4433 4434 /* 4435 * A "dead" pcap_t never requires special BPF code generation. 4436 */ 4437 p->bpf_codegen_flags = 0; 4438 4439 p->activated = 1; 4440 return (p); 4441} 4442 4443pcap_t * 4444pcap_open_dead(int linktype, int snaplen) 4445{ 4446 return (pcap_open_dead_with_tstamp_precision(linktype, snaplen, 4447 PCAP_TSTAMP_PRECISION_MICRO)); 4448} 4449 4450#ifdef YYDEBUG 4451/* 4452 * Set the internal "debug printout" flag for the filter expression parser. 4453 * The code to print that stuff is present only if YYDEBUG is defined, so 4454 * the flag, and the routine to set it, are defined only if YYDEBUG is 4455 * defined. 4456 * 4457 * This is intended for libpcap developers, not for general use. 4458 * If you want to set these in a program, you'll have to declare this 4459 * routine yourself, with the appropriate DLL import attribute on Windows; 4460 * it's not declared in any header file, and won't be declared in any 4461 * header file provided by libpcap. 4462 */ 4463PCAP_API void pcap_set_parser_debug(int value); 4464 4465PCAP_API_DEF void 4466pcap_set_parser_debug(int value) 4467{ 4468 pcap_debug = value; 4469} 4470#endif 4471