if_vx_pci.c revision 41837
1/* 2 * Copyright (C) 1996 Naoki Hamada <nao@tom-yam.or.jp> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the author nor the names of any co-contributors 14 * may be used to endorse or promote products derived from this software 15 * without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 */ 30 31#include "pci.h" 32#if NPCI > 0 33 34#include "vx.h" 35#if NVX > 0 36 37#include <sys/param.h> 38#include <sys/systm.h> 39#include <sys/kernel.h> 40#include <sys/socket.h> 41 42#include <net/if.h> 43#include <net/if_arp.h> 44 45#include <pci/pcivar.h> 46 47#include <dev/vx/if_vxreg.h> 48 49static void vx_pci_shutdown(int, void *); 50static const char *vx_pci_probe(pcici_t, pcidi_t); 51static void vx_pci_attach(pcici_t, int unit); 52 53static void 54vx_pci_shutdown( 55 int howto, 56 void *sc) 57{ 58 vxstop(sc); 59 vxfree(sc); 60} 61 62static const char* 63vx_pci_probe( 64 pcici_t config_id, 65 pcidi_t device_id) 66{ 67 if(device_id == 0x590010b7ul) 68 return "3COM 3C590 Etherlink III PCI"; 69 if(device_id == 0x595010b7ul || device_id == 0x595110b7ul || 70 device_id == 0x595210b7ul) 71 return "3COM 3C595 Fast Etherlink III PCI"; 72 /* 73 * The (Fast) Etherlink XL adapters are now supported by 74 * the xl driver, which uses bus master DMA and is much 75 * faster. (And which also supports the 3c905B. 76 */ 77#ifdef VORTEX_ETHERLINK_XL 78 if(device_id == 0x900010b7ul || device_id == 0x900110b7ul) 79 return "3COM 3C900 Etherlink XL PCI"; 80 if(device_id == 0x905010b7ul || device_id == 0x905110b7ul) 81 return "3COM 3C905 Fast Etherlink XL PCI"; 82#endif 83 return NULL; 84} 85 86static void 87vx_pci_attach( 88 pcici_t config_id, 89 int unit) 90{ 91 struct vx_softc *sc; 92 93 if (unit >= NVX) { 94 printf("vx%d: not configured; kernel is built for only %d device%s.\n", 95 unit, NVX, NVX == 1 ? "" : "s"); 96 return; 97 } 98 99 if ((sc = vxalloc(unit)) == NULL) { 100 return; 101 } 102 103 sc->vx_io_addr = pci_conf_read(config_id, 0x10) & 0xffffffe0; 104 105 if (vxattach(sc) == 0) { 106 return; 107 } 108 109 /* defect check for 3C590 */ 110 if ((pci_conf_read(config_id, 0) >> 16) == 0x5900) { 111 GO_WINDOW(0); 112 if (vxbusyeeprom(sc)) 113 return; 114 outw(BASE + VX_W0_EEPROM_COMMAND, EEPROM_CMD_RD | EEPROM_SOFT_INFO_2); 115 if (vxbusyeeprom(sc)) 116 return; 117 if (!(inw(BASE + VX_W0_EEPROM_DATA) & NO_RX_OVN_ANOMALY)) { 118 printf("Warning! Defective early revision adapter!\n"); 119 } 120 } 121 122 /* 123 * Add shutdown hook so that DMA is disabled prior to reboot. Not 124 * doing do could allow DMA to corrupt kernel memory during the 125 * reboot before the driver initializes. 126 */ 127 at_shutdown(vx_pci_shutdown, sc, SHUTDOWN_POST_SYNC); 128 129 pci_map_int(config_id, vxintr, (void *) sc, &net_imask); 130} 131 132static struct pci_device vxdevice = { 133 "vx", 134 vx_pci_probe, 135 vx_pci_attach, 136 &vx_count, 137 NULL 138}; 139 140DATA_SET (pcidevice_set, vxdevice); 141 142#endif /* NVX */ 143#endif /* NPCI */ 144