usb_core.h revision 191402
1/* $FreeBSD: head/sys/dev/usb/usb_core.h 191402 2009-04-22 17:08:16Z thompsa $ */ 2/*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27/* 28 * Including this file is mandatory for all USB related c-files in the kernel. 29 */ 30 31#ifndef _USB2_CORE_H_ 32#define _USB2_CORE_H_ 33 34#define USB_STACK_VERSION 2000 /* 2.0 */ 35 36/* Allow defines in "opt_usb.h" to override configuration */ 37 38#include "opt_usb.h" 39#include "opt_bus.h" 40 41/* Default USB configuration */ 42 43/* 44 * The following macro defines if the code shall use cv_xxx() instead 45 * of msleep() and wakeup(). 46 */ 47#ifndef USB_HAVE_CONDVAR 48#define USB_HAVE_CONDVAR 0 49#endif 50 51/* 52 * The following macro defines if the code shall support 53 * /dev/usb/x.y.z. 54 */ 55#ifndef USB_HAVE_UGEN 56#define USB_HAVE_UGEN 1 57#endif 58 59/* 60 * The following macro defines if the code shall support any forms of 61 * ASCII strings. 62 */ 63#ifndef USB_HAVE_STRINGS 64#define USB_HAVE_STRINGS 1 65#endif 66 67/* 68 * The following macro defines if the code shall support BUS-DMA. 69 */ 70#ifndef USB_HAVE_BUSDMA 71#define USB_HAVE_BUSDMA 1 72#endif 73 74/* 75 * The following macro defines if the code shall support the Linux 76 * compatibility layer. 77 */ 78#ifndef USB_HAVE_COMPAT_LINUX 79#define USB_HAVE_COMPAT_LINUX 1 80#endif 81 82/* 83 * The following macro defines if the code shall support 84 * userland data transfer via copyin() and copyout() 85 */ 86#ifndef USB_HAVE_USER_IO 87#define USB_HAVE_USER_IO 1 88#endif 89 90/* 91 * The following macro defines if the code shall support copy in via 92 * bsd-mbufs to USB. 93 */ 94#ifndef USB_HAVE_MBUF 95#define USB_HAVE_MBUF 1 96#endif 97 98/* 99 * The following macro defines if the code shall compile a table 100 * describing USB vendor and product IDs. 101 */ 102#ifndef USB_VERBOSE 103#define USB_VERBOSE 1 104#endif 105 106/* 107 * The following macro defines if USB debugging support shall be 108 * compiled for the USB core and all drivers. 109 */ 110#ifndef USB_DEBUG 111#define USB_DEBUG 1 112#endif 113 114/* 115 * The following macro defines if USB transaction translator support 116 * shall be supported for the USB HUB and USB controller drivers. 117 */ 118#ifndef USB_HAVE_TT_SUPPORT 119#define USB_HAVE_TT_SUPPORT 1 120#endif 121 122/* 123 * The following macro defines if the USB power daemon shall 124 * be supported in the USB core. 125 */ 126#ifndef USB_HAVE_POWERD 127#define USB_HAVE_POWERD 1 128#endif 129 130/* 131 * The following macro defines if the USB autoinstall detection shall 132 * be supported in the USB core. 133 */ 134#ifndef USB_HAVE_MSCTEST 135#define USB_HAVE_MSCTEST 1 136#endif 137 138#ifndef USB_TD_GET_PROC 139#define USB_TD_GET_PROC(td) (td)->td_proc 140#endif 141 142#ifndef USB_PROC_GET_GID 143#define USB_PROC_GET_GID(td) (td)->p_pgid 144#endif 145 146/* Include files */ 147 148#include <sys/stdint.h> 149#include <sys/stddef.h> 150#include <sys/param.h> 151#include <sys/queue.h> 152#include <sys/types.h> 153#include <sys/systm.h> 154#include <sys/kernel.h> 155#include <sys/bus.h> 156#include <sys/linker_set.h> 157#include <sys/module.h> 158#include <sys/lock.h> 159#include <sys/mutex.h> 160#include <sys/condvar.h> 161#include <sys/sysctl.h> 162#include <sys/sx.h> 163#include <sys/unistd.h> 164#include <sys/callout.h> 165#include <sys/malloc.h> 166#include <sys/priv.h> 167 168#include <dev/usb/usb_defs.h> 169#include <dev/usb/usb_revision.h> 170 171#include "usb_if.h" 172 173#ifndef USB_HOST_ALIGN 174#define USB_HOST_ALIGN 8 /* bytes, must be power of two */ 175#endif 176 177#ifndef USB_FS_ISOC_UFRAME_MAX 178#define USB_FS_ISOC_UFRAME_MAX 4 /* exclusive unit */ 179#endif 180 181#if (USB_FS_ISOC_UFRAME_MAX > 6) 182#error "USB_FS_ISOC_UFRAME_MAX cannot be set higher than 6" 183#endif 184 185#ifndef USB_BUS_MAX 186#define USB_BUS_MAX 256 /* units */ 187#endif 188 189#ifndef USB_MAX_DEVICES 190#define USB_MAX_DEVICES 128 /* units */ 191#endif 192 193#if (USB_MAX_DEVICES < USB_MIN_DEVICES) 194#error "Minimum number of devices is greater than maximum number of devices." 195#endif 196 197#ifndef USB_IFACE_MAX 198#define USB_IFACE_MAX 32 /* units */ 199#endif 200 201#ifndef USB_FIFO_MAX 202#define USB_FIFO_MAX 128 /* units */ 203#endif 204 205#if (USB_FIFO_MAX & 1) 206#error "Number of FIFOs must be odd." 207#endif 208 209#define USB_MAX_FS_ISOC_FRAMES_PER_XFER (120) /* units */ 210#define USB_MAX_HS_ISOC_FRAMES_PER_XFER (8*120) /* units */ 211 212#ifndef USB_HUB_MAX_DEPTH 213#define USB_HUB_MAX_DEPTH 5 214#endif 215 216#ifndef USB_EP0_BUFSIZE 217#define USB_EP0_BUFSIZE 1024 /* bytes */ 218#endif 219 220/* USB transfer states */ 221 222#define USB_ST_SETUP 0 223#define USB_ST_TRANSFERRED 1 224#define USB_ST_ERROR 2 225 226/* 227 * The following macro will return the current state of an USB 228 * transfer like defined by the "USB_ST_XXX" enums. 229 */ 230#define USB_GET_STATE(xfer) ((xfer)->usb2_state) 231 232/* 233 * The following macro will tell if an USB transfer is currently 234 * receiving or transferring data. 235 */ 236#define USB_GET_DATA_ISREAD(xfer) (((xfer)->flags_int.usb2_mode == \ 237 USB_MODE_DEVICE) ? ((xfer->endpoint & UE_DIR_IN) ? 0 : 1) : \ 238 ((xfer->endpoint & UE_DIR_IN) ? 1 : 0)) 239 240/* 241 * The following macros are used used to convert milliseconds into 242 * HZ. We use 1024 instead of 1000 milliseconds per second to save a 243 * full division. 244 */ 245#define USB_MS_HZ 1024 246 247#define USB_MS_TO_TICKS(ms) \ 248 (((uint32_t)((((uint32_t)(ms)) * ((uint32_t)(hz))) + USB_MS_HZ - 1)) / USB_MS_HZ) 249 250/* macros */ 251 252#define usb2_callout_init_mtx(c,m,f) callout_init_mtx(&(c)->co,m,f) 253#define usb2_callout_reset(c,t,f,d) callout_reset(&(c)->co,t,f,d) 254#define usb2_callout_stop(c) callout_stop(&(c)->co) 255#define usb2_callout_drain(c) callout_drain(&(c)->co) 256#define usb2_callout_pending(c) callout_pending(&(c)->co) 257 258#define USB_BUS_LOCK(_b) mtx_lock(&(_b)->bus_mtx) 259#define USB_BUS_UNLOCK(_b) mtx_unlock(&(_b)->bus_mtx) 260#define USB_BUS_LOCK_ASSERT(_b, _t) mtx_assert(&(_b)->bus_mtx, _t) 261#define USB_XFER_LOCK(_x) mtx_lock((_x)->xroot->xfer_mtx) 262#define USB_XFER_UNLOCK(_x) mtx_unlock((_x)->xroot->xfer_mtx) 263#define USB_XFER_LOCK_ASSERT(_x, _t) mtx_assert((_x)->xroot->xfer_mtx, _t) 264/* structure prototypes */ 265 266struct file; 267struct usb2_bus; 268struct usb2_device; 269struct usb2_device_request; 270struct usb2_page; 271struct usb2_page_cache; 272struct usb2_xfer; 273struct usb2_xfer_root; 274 275/* typedefs */ 276 277typedef void (usb2_callback_t)(struct usb2_xfer *); 278 279#ifndef USB_HAVE_USB_ERROR_T 280typedef uint8_t usb2_error_t; /* see "USB_ERR_XXX" */ 281#endif 282 283#ifndef USB_HAVE_TIMEOUT_T 284typedef uint32_t usb2_timeout_t; /* milliseconds */ 285#endif 286 287#ifndef USB_HAVE_FRLENGTH_T 288typedef uint32_t usb2_frlength_t; /* bytes */ 289#endif 290 291#ifndef USB_HAVE_FRCOUNT_T 292typedef uint32_t usb2_frcount_t; /* units */ 293#endif 294 295#ifndef USB_HAVE_SIZE_T 296typedef uint32_t usb2_size_t; /* bytes */ 297#endif 298 299#ifndef USB_HAVE_TICKS_T 300typedef uint32_t usb2_ticks_t; /* system defined */ 301#endif 302 303#ifndef USB_HAVE_POWER_MASK_T 304typedef uint16_t usb2_power_mask_t; /* see "USB_HW_POWER_XXX" */ 305#endif 306 307typedef usb2_error_t (usb2_handle_request_t)(struct usb2_device *, 308 struct usb2_device_request *, const void **, uint16_t *); 309 310/* structures */ 311 312/* 313 * Common queue structure for USB transfers. 314 */ 315struct usb2_xfer_queue { 316 TAILQ_HEAD(, usb2_xfer) head; 317 struct usb2_xfer *curr; /* current USB transfer processed */ 318 void (*command) (struct usb2_xfer_queue *pq); 319 uint8_t recurse_1:1; 320 uint8_t recurse_2:1; 321}; 322 323/* 324 * The following is a wrapper for the callout structure to ease 325 * porting the code to other platforms. 326 */ 327struct usb2_callout { 328 struct callout co; 329}; 330 331/* 332 * The following structure defines a set of USB transfer flags. 333 */ 334struct usb2_xfer_flags { 335 uint8_t force_short_xfer:1; /* force a short transmit transfer 336 * last */ 337 uint8_t short_xfer_ok:1; /* allow short receive transfers */ 338 uint8_t short_frames_ok:1; /* allow short frames */ 339 uint8_t pipe_bof:1; /* block pipe on failure */ 340 uint8_t proxy_buffer:1; /* makes buffer size a factor of 341 * "max_frame_size" */ 342 uint8_t ext_buffer:1; /* uses external DMA buffer */ 343 uint8_t manual_status:1; /* non automatic status stage on 344 * control transfers */ 345 uint8_t no_pipe_ok:1; /* set if "USB_ERR_NO_PIPE" error can 346 * be ignored */ 347 uint8_t stall_pipe:1; /* set if the endpoint belonging to 348 * this USB transfer should be stalled 349 * before starting this transfer! */ 350}; 351 352/* 353 * The following structure defines a set of internal USB transfer 354 * flags. 355 */ 356struct usb2_xfer_flags_int { 357 uint16_t control_rem; /* remainder in bytes */ 358 359 uint8_t open:1; /* set if USB pipe has been opened */ 360 uint8_t transferring:1; /* set if an USB transfer is in 361 * progress */ 362 uint8_t did_dma_delay:1; /* set if we waited for HW DMA */ 363 uint8_t did_close:1; /* set if we closed the USB transfer */ 364 uint8_t draining:1; /* set if we are draining an USB 365 * transfer */ 366 uint8_t started:1; /* keeps track of started or stopped */ 367 uint8_t bandwidth_reclaimed:1; 368 uint8_t control_xfr:1; /* set if control transfer */ 369 uint8_t control_hdr:1; /* set if control header should be 370 * sent */ 371 uint8_t control_act:1; /* set if control transfer is active */ 372 373 uint8_t short_frames_ok:1; /* filtered version */ 374 uint8_t short_xfer_ok:1; /* filtered version */ 375#if USB_HAVE_BUSDMA 376 uint8_t bdma_enable:1; /* filtered version (only set if 377 * hardware supports DMA) */ 378 uint8_t bdma_no_post_sync:1; /* set if the USB callback wrapper 379 * should not do the BUS-DMA post sync 380 * operation */ 381 uint8_t bdma_setup:1; /* set if BUS-DMA has been setup */ 382#endif 383 uint8_t isochronous_xfr:1; /* set if isochronous transfer */ 384 uint8_t usb2_mode:1; /* shadow copy of "udev->usb2_mode" */ 385 uint8_t curr_dma_set:1; /* used by USB HC/DC driver */ 386 uint8_t can_cancel_immed:1; /* set if USB transfer can be 387 * cancelled immediately */ 388}; 389 390/* 391 * The following structure define an USB configuration, that basically 392 * is used when setting up an USB transfer. 393 */ 394struct usb2_config { 395 usb2_callback_t *callback; /* USB transfer callback */ 396 usb2_frlength_t bufsize; /* total pipe buffer size in bytes */ 397 usb2_frcount_t frames; /* maximum number of USB frames */ 398 usb2_timeout_t interval; /* interval in milliseconds */ 399#define USB_DEFAULT_INTERVAL 0 400 usb2_timeout_t timeout; /* transfer timeout in milliseconds */ 401 struct usb2_xfer_flags flags; /* transfer flags */ 402 uint8_t type; /* pipe type */ 403 uint8_t endpoint; /* pipe number */ 404 uint8_t direction; /* pipe direction */ 405 uint8_t ep_index; /* pipe index match to use */ 406 uint8_t if_index; /* "ifaces" index to use */ 407 uint8_t usb_mode; /* see "USB_MODE_XXX", 408 * "USB_MODE_MAX" means any mode! */ 409}; 410 411/* 412 * The following structure defines an USB transfer. 413 */ 414struct usb2_xfer { 415 struct usb2_callout timeout_handle; 416 TAILQ_ENTRY(usb2_xfer) wait_entry; /* used at various places */ 417 418 struct usb2_page_cache *buf_fixup; /* fixup buffer(s) */ 419 struct usb2_xfer_queue *wait_queue; /* pointer to queue that we 420 * are waiting on */ 421 struct usb2_page *dma_page_ptr; 422 struct usb2_pipe *pipe; /* our USB pipe */ 423 struct usb2_xfer_root *xroot; /* used by HC driver */ 424 void *qh_start[2]; /* used by HC driver */ 425 void *td_start[2]; /* used by HC driver */ 426 void *td_transfer_first; /* used by HC driver */ 427 void *td_transfer_last; /* used by HC driver */ 428 void *td_transfer_cache; /* used by HC driver */ 429 void *priv_sc; /* device driver data pointer 1 */ 430 void *priv_fifo; /* device driver data pointer 2 */ 431 void *local_buffer; 432 usb2_frlength_t *frlengths; 433 struct usb2_page_cache *frbuffers; 434 usb2_callback_t *callback; 435 436 usb2_frlength_t max_hc_frame_size; 437 usb2_frlength_t max_data_length; 438 usb2_frlength_t sumlen; /* sum of all lengths in bytes */ 439 usb2_frlength_t actlen; /* actual length in bytes */ 440 usb2_timeout_t timeout; /* milliseconds */ 441#define USB_NO_TIMEOUT 0 442#define USB_DEFAULT_TIMEOUT 5000 /* 5000 ms = 5 seconds */ 443 444 usb2_frcount_t max_frame_count; /* initial value of "nframes" after 445 * setup */ 446 usb2_frcount_t nframes; /* number of USB frames to transfer */ 447 usb2_frcount_t aframes; /* actual number of USB frames 448 * transferred */ 449 450 uint16_t max_packet_size; 451 uint16_t max_frame_size; 452 uint16_t qh_pos; 453 uint16_t isoc_time_complete; /* in ms */ 454 usb2_timeout_t interval; /* milliseconds */ 455 456 uint8_t address; /* physical USB address */ 457 uint8_t endpoint; /* physical USB endpoint */ 458 uint8_t max_packet_count; 459 uint8_t usb2_smask; 460 uint8_t usb2_cmask; 461 uint8_t usb2_uframe; 462 uint8_t usb2_state; 463 464 usb2_error_t error; 465 466 struct usb2_xfer_flags flags; 467 struct usb2_xfer_flags_int flags_int; 468}; 469 470/* 471 * The following structure keeps information that is used to match 472 * against an array of "usb2_device_id" elements. 473 */ 474struct usb2_lookup_info { 475 uint16_t idVendor; 476 uint16_t idProduct; 477 uint16_t bcdDevice; 478 uint8_t bDeviceClass; 479 uint8_t bDeviceSubClass; 480 uint8_t bDeviceProtocol; 481 uint8_t bInterfaceClass; 482 uint8_t bInterfaceSubClass; 483 uint8_t bInterfaceProtocol; 484 uint8_t bIfaceIndex; 485 uint8_t bIfaceNum; 486 uint8_t bConfigIndex; 487 uint8_t bConfigNum; 488}; 489 490/* Structure used by probe and attach */ 491 492struct usb2_attach_arg { 493 struct usb2_lookup_info info; 494 device_t temp_dev; /* for internal use */ 495 const void *driver_info; /* for internal use */ 496 struct usb2_device *device; /* current device */ 497 struct usb2_interface *iface; /* current interface */ 498 uint8_t usb2_mode; /* see USB_MODE_XXX */ 499 uint8_t port; 500 uint8_t use_generic; /* hint for generic drivers */ 501}; 502 503/* external variables */ 504 505MALLOC_DECLARE(M_USB); 506MALLOC_DECLARE(M_USBDEV); 507MALLOC_DECLARE(M_USBHC); 508 509extern struct mtx usb2_ref_lock; 510 511/* typedefs */ 512 513typedef struct malloc_type *usb2_malloc_type; 514 515/* prototypes */ 516 517const char *usb2_errstr(usb2_error_t error); 518struct usb2_config_descriptor *usb2_get_config_descriptor( 519 struct usb2_device *udev); 520struct usb2_device_descriptor *usb2_get_device_descriptor( 521 struct usb2_device *udev); 522struct usb2_interface *usb2_get_iface(struct usb2_device *udev, 523 uint8_t iface_index); 524struct usb2_interface_descriptor *usb2_get_interface_descriptor( 525 struct usb2_interface *iface); 526uint8_t usb2_clear_stall_callback(struct usb2_xfer *xfer1, 527 struct usb2_xfer *xfer2); 528uint8_t usb2_get_interface_altindex(struct usb2_interface *iface); 529usb2_error_t usb2_set_alt_interface_index(struct usb2_device *udev, 530 uint8_t iface_index, uint8_t alt_index); 531uint8_t usb2_get_mode(struct usb2_device *udev); 532uint8_t usb2_get_speed(struct usb2_device *udev); 533uint32_t usb2_get_isoc_fps(struct usb2_device *udev); 534usb2_error_t usb2_transfer_setup(struct usb2_device *udev, 535 const uint8_t *ifaces, struct usb2_xfer **pxfer, 536 const struct usb2_config *setup_start, uint16_t n_setup, 537 void *priv_sc, struct mtx *priv_mtx); 538void usb2_set_frame_data(struct usb2_xfer *xfer, void *ptr, 539 usb2_frcount_t frindex); 540void usb2_set_frame_offset(struct usb2_xfer *xfer, usb2_frlength_t offset, 541 usb2_frcount_t frindex); 542void usb2_start_hardware(struct usb2_xfer *xfer); 543void usb2_transfer_clear_stall(struct usb2_xfer *xfer); 544void usb2_transfer_drain(struct usb2_xfer *xfer); 545void usb2_transfer_set_stall(struct usb2_xfer *xfer); 546uint8_t usb2_transfer_pending(struct usb2_xfer *xfer); 547void usb2_transfer_start(struct usb2_xfer *xfer); 548void usb2_transfer_stop(struct usb2_xfer *xfer); 549void usb2_transfer_unsetup(struct usb2_xfer **pxfer, uint16_t n_setup); 550void usb2_set_parent_iface(struct usb2_device *udev, uint8_t iface_index, 551 uint8_t parent_index); 552uint8_t usb2_get_bus_index(struct usb2_device *udev); 553uint8_t usb2_get_device_index(struct usb2_device *udev); 554void usb2_set_power_mode(struct usb2_device *udev, uint8_t power_mode); 555 556#endif /* _USB2_CORE_H_ */ 557