if_re.c revision 266213
1/*- 2 * Copyright (c) 1997, 1998-2003 3 * Bill Paul <wpaul@windriver.com>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33#include <sys/cdefs.h> 34__FBSDID("$FreeBSD: stable/9/sys/dev/re/if_re.c 266213 2014-05-16 05:11:15Z yongari $"); 35 36/* 37 * RealTek 8139C+/8169/8169S/8110S/8168/8111/8101E PCI NIC driver 38 * 39 * Written by Bill Paul <wpaul@windriver.com> 40 * Senior Networking Software Engineer 41 * Wind River Systems 42 */ 43 44/* 45 * This driver is designed to support RealTek's next generation of 46 * 10/100 and 10/100/1000 PCI ethernet controllers. There are currently 47 * seven devices in this family: the RTL8139C+, the RTL8169, the RTL8169S, 48 * RTL8110S, the RTL8168, the RTL8111 and the RTL8101E. 49 * 50 * The 8139C+ is a 10/100 ethernet chip. It is backwards compatible 51 * with the older 8139 family, however it also supports a special 52 * C+ mode of operation that provides several new performance enhancing 53 * features. These include: 54 * 55 * o Descriptor based DMA mechanism. Each descriptor represents 56 * a single packet fragment. Data buffers may be aligned on 57 * any byte boundary. 58 * 59 * o 64-bit DMA 60 * 61 * o TCP/IP checksum offload for both RX and TX 62 * 63 * o High and normal priority transmit DMA rings 64 * 65 * o VLAN tag insertion and extraction 66 * 67 * o TCP large send (segmentation offload) 68 * 69 * Like the 8139, the 8139C+ also has a built-in 10/100 PHY. The C+ 70 * programming API is fairly straightforward. The RX filtering, EEPROM 71 * access and PHY access is the same as it is on the older 8139 series 72 * chips. 73 * 74 * The 8169 is a 64-bit 10/100/1000 gigabit ethernet MAC. It has almost the 75 * same programming API and feature set as the 8139C+ with the following 76 * differences and additions: 77 * 78 * o 1000Mbps mode 79 * 80 * o Jumbo frames 81 * 82 * o GMII and TBI ports/registers for interfacing with copper 83 * or fiber PHYs 84 * 85 * o RX and TX DMA rings can have up to 1024 descriptors 86 * (the 8139C+ allows a maximum of 64) 87 * 88 * o Slight differences in register layout from the 8139C+ 89 * 90 * The TX start and timer interrupt registers are at different locations 91 * on the 8169 than they are on the 8139C+. Also, the status word in the 92 * RX descriptor has a slightly different bit layout. The 8169 does not 93 * have a built-in PHY. Most reference boards use a Marvell 88E1000 'Alaska' 94 * copper gigE PHY. 95 * 96 * The 8169S/8110S 10/100/1000 devices have built-in copper gigE PHYs 97 * (the 'S' stands for 'single-chip'). These devices have the same 98 * programming API as the older 8169, but also have some vendor-specific 99 * registers for the on-board PHY. The 8110S is a LAN-on-motherboard 100 * part designed to be pin-compatible with the RealTek 8100 10/100 chip. 101 * 102 * This driver takes advantage of the RX and TX checksum offload and 103 * VLAN tag insertion/extraction features. It also implements TX 104 * interrupt moderation using the timer interrupt registers, which 105 * significantly reduces TX interrupt load. There is also support 106 * for jumbo frames, however the 8169/8169S/8110S can not transmit 107 * jumbo frames larger than 7440, so the max MTU possible with this 108 * driver is 7422 bytes. 109 */ 110 111#ifdef HAVE_KERNEL_OPTION_HEADERS 112#include "opt_device_polling.h" 113#endif 114 115#include <sys/param.h> 116#include <sys/endian.h> 117#include <sys/systm.h> 118#include <sys/sockio.h> 119#include <sys/mbuf.h> 120#include <sys/malloc.h> 121#include <sys/module.h> 122#include <sys/kernel.h> 123#include <sys/socket.h> 124#include <sys/lock.h> 125#include <sys/mutex.h> 126#include <sys/sysctl.h> 127#include <sys/taskqueue.h> 128 129#include <net/if.h> 130#include <net/if_arp.h> 131#include <net/ethernet.h> 132#include <net/if_dl.h> 133#include <net/if_media.h> 134#include <net/if_types.h> 135#include <net/if_vlan_var.h> 136 137#include <net/bpf.h> 138 139#include <machine/bus.h> 140#include <machine/resource.h> 141#include <sys/bus.h> 142#include <sys/rman.h> 143 144#include <dev/mii/mii.h> 145#include <dev/mii/miivar.h> 146 147#include <dev/pci/pcireg.h> 148#include <dev/pci/pcivar.h> 149 150#include <pci/if_rlreg.h> 151 152MODULE_DEPEND(re, pci, 1, 1, 1); 153MODULE_DEPEND(re, ether, 1, 1, 1); 154MODULE_DEPEND(re, miibus, 1, 1, 1); 155 156/* "device miibus" required. See GENERIC if you get errors here. */ 157#include "miibus_if.h" 158 159/* Tunables. */ 160static int intr_filter = 0; 161TUNABLE_INT("hw.re.intr_filter", &intr_filter); 162static int msi_disable = 0; 163TUNABLE_INT("hw.re.msi_disable", &msi_disable); 164static int msix_disable = 0; 165TUNABLE_INT("hw.re.msix_disable", &msix_disable); 166static int prefer_iomap = 0; 167TUNABLE_INT("hw.re.prefer_iomap", &prefer_iomap); 168 169#define RE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) 170 171/* 172 * Various supported device vendors/types and their names. 173 */ 174static const struct rl_type re_devs[] = { 175 { DLINK_VENDORID, DLINK_DEVICEID_528T, 0, 176 "D-Link DGE-528(T) Gigabit Ethernet Adapter" }, 177 { DLINK_VENDORID, DLINK_DEVICEID_530T_REVC, 0, 178 "D-Link DGE-530(T) Gigabit Ethernet Adapter" }, 179 { RT_VENDORID, RT_DEVICEID_8139, 0, 180 "RealTek 8139C+ 10/100BaseTX" }, 181 { RT_VENDORID, RT_DEVICEID_8101E, 0, 182 "RealTek 810xE PCIe 10/100baseTX" }, 183 { RT_VENDORID, RT_DEVICEID_8168, 0, 184 "RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet" }, 185 { RT_VENDORID, RT_DEVICEID_8169, 0, 186 "RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet" }, 187 { RT_VENDORID, RT_DEVICEID_8169SC, 0, 188 "RealTek 8169SC/8110SC Single-chip Gigabit Ethernet" }, 189 { COREGA_VENDORID, COREGA_DEVICEID_CGLAPCIGT, 0, 190 "Corega CG-LAPCIGT (RTL8169S) Gigabit Ethernet" }, 191 { LINKSYS_VENDORID, LINKSYS_DEVICEID_EG1032, 0, 192 "Linksys EG1032 (RTL8169S) Gigabit Ethernet" }, 193 { USR_VENDORID, USR_DEVICEID_997902, 0, 194 "US Robotics 997902 (RTL8169S) Gigabit Ethernet" } 195}; 196 197static const struct rl_hwrev re_hwrevs[] = { 198 { RL_HWREV_8139, RL_8139, "", RL_MTU }, 199 { RL_HWREV_8139A, RL_8139, "A", RL_MTU }, 200 { RL_HWREV_8139AG, RL_8139, "A-G", RL_MTU }, 201 { RL_HWREV_8139B, RL_8139, "B", RL_MTU }, 202 { RL_HWREV_8130, RL_8139, "8130", RL_MTU }, 203 { RL_HWREV_8139C, RL_8139, "C", RL_MTU }, 204 { RL_HWREV_8139D, RL_8139, "8139D/8100B/8100C", RL_MTU }, 205 { RL_HWREV_8139CPLUS, RL_8139CPLUS, "C+", RL_MTU }, 206 { RL_HWREV_8168B_SPIN1, RL_8169, "8168", RL_JUMBO_MTU }, 207 { RL_HWREV_8169, RL_8169, "8169", RL_JUMBO_MTU }, 208 { RL_HWREV_8169S, RL_8169, "8169S", RL_JUMBO_MTU }, 209 { RL_HWREV_8110S, RL_8169, "8110S", RL_JUMBO_MTU }, 210 { RL_HWREV_8169_8110SB, RL_8169, "8169SB/8110SB", RL_JUMBO_MTU }, 211 { RL_HWREV_8169_8110SC, RL_8169, "8169SC/8110SC", RL_JUMBO_MTU }, 212 { RL_HWREV_8169_8110SBL, RL_8169, "8169SBL/8110SBL", RL_JUMBO_MTU }, 213 { RL_HWREV_8169_8110SCE, RL_8169, "8169SC/8110SC", RL_JUMBO_MTU }, 214 { RL_HWREV_8100, RL_8139, "8100", RL_MTU }, 215 { RL_HWREV_8101, RL_8139, "8101", RL_MTU }, 216 { RL_HWREV_8100E, RL_8169, "8100E", RL_MTU }, 217 { RL_HWREV_8101E, RL_8169, "8101E", RL_MTU }, 218 { RL_HWREV_8102E, RL_8169, "8102E", RL_MTU }, 219 { RL_HWREV_8102EL, RL_8169, "8102EL", RL_MTU }, 220 { RL_HWREV_8102EL_SPIN1, RL_8169, "8102EL", RL_MTU }, 221 { RL_HWREV_8103E, RL_8169, "8103E", RL_MTU }, 222 { RL_HWREV_8401E, RL_8169, "8401E", RL_MTU }, 223 { RL_HWREV_8402, RL_8169, "8402", RL_MTU }, 224 { RL_HWREV_8105E, RL_8169, "8105E", RL_MTU }, 225 { RL_HWREV_8105E_SPIN1, RL_8169, "8105E", RL_MTU }, 226 { RL_HWREV_8106E, RL_8169, "8106E", RL_MTU }, 227 { RL_HWREV_8168B_SPIN2, RL_8169, "8168", RL_JUMBO_MTU }, 228 { RL_HWREV_8168B_SPIN3, RL_8169, "8168", RL_JUMBO_MTU }, 229 { RL_HWREV_8168C, RL_8169, "8168C/8111C", RL_JUMBO_MTU_6K }, 230 { RL_HWREV_8168C_SPIN2, RL_8169, "8168C/8111C", RL_JUMBO_MTU_6K }, 231 { RL_HWREV_8168CP, RL_8169, "8168CP/8111CP", RL_JUMBO_MTU_6K }, 232 { RL_HWREV_8168D, RL_8169, "8168D/8111D", RL_JUMBO_MTU_9K }, 233 { RL_HWREV_8168DP, RL_8169, "8168DP/8111DP", RL_JUMBO_MTU_9K }, 234 { RL_HWREV_8168E, RL_8169, "8168E/8111E", RL_JUMBO_MTU_9K}, 235 { RL_HWREV_8168E_VL, RL_8169, "8168E/8111E-VL", RL_JUMBO_MTU_6K}, 236 { RL_HWREV_8168EP, RL_8169, "8168EP/8111EP", RL_JUMBO_MTU_9K}, 237 { RL_HWREV_8168F, RL_8169, "8168F/8111F", RL_JUMBO_MTU_9K}, 238 { RL_HWREV_8168G, RL_8169, "8168G/8111G", RL_JUMBO_MTU_9K}, 239 { RL_HWREV_8168GU, RL_8169, "8168GU/8111GU", RL_JUMBO_MTU_9K}, 240 { RL_HWREV_8411, RL_8169, "8411", RL_JUMBO_MTU_9K}, 241 { RL_HWREV_8411B, RL_8169, "8411B", RL_JUMBO_MTU_9K}, 242 { 0, 0, NULL, 0 } 243}; 244 245static int re_probe (device_t); 246static int re_attach (device_t); 247static int re_detach (device_t); 248 249static int re_encap (struct rl_softc *, struct mbuf **); 250 251static void re_dma_map_addr (void *, bus_dma_segment_t *, int, int); 252static int re_allocmem (device_t, struct rl_softc *); 253static __inline void re_discard_rxbuf 254 (struct rl_softc *, int); 255static int re_newbuf (struct rl_softc *, int); 256static int re_jumbo_newbuf (struct rl_softc *, int); 257static int re_rx_list_init (struct rl_softc *); 258static int re_jrx_list_init (struct rl_softc *); 259static int re_tx_list_init (struct rl_softc *); 260#ifdef RE_FIXUP_RX 261static __inline void re_fixup_rx 262 (struct mbuf *); 263#endif 264static int re_rxeof (struct rl_softc *, int *); 265static void re_txeof (struct rl_softc *); 266#ifdef DEVICE_POLLING 267static int re_poll (struct ifnet *, enum poll_cmd, int); 268static int re_poll_locked (struct ifnet *, enum poll_cmd, int); 269#endif 270static int re_intr (void *); 271static void re_intr_msi (void *); 272static void re_tick (void *); 273static void re_int_task (void *, int); 274static void re_start (struct ifnet *); 275static void re_start_locked (struct ifnet *); 276static int re_ioctl (struct ifnet *, u_long, caddr_t); 277static void re_init (void *); 278static void re_init_locked (struct rl_softc *); 279static void re_stop (struct rl_softc *); 280static void re_watchdog (struct rl_softc *); 281static int re_suspend (device_t); 282static int re_resume (device_t); 283static int re_shutdown (device_t); 284static int re_ifmedia_upd (struct ifnet *); 285static void re_ifmedia_sts (struct ifnet *, struct ifmediareq *); 286 287static void re_eeprom_putbyte (struct rl_softc *, int); 288static void re_eeprom_getword (struct rl_softc *, int, u_int16_t *); 289static void re_read_eeprom (struct rl_softc *, caddr_t, int, int); 290static int re_gmii_readreg (device_t, int, int); 291static int re_gmii_writereg (device_t, int, int, int); 292 293static int re_miibus_readreg (device_t, int, int); 294static int re_miibus_writereg (device_t, int, int, int); 295static void re_miibus_statchg (device_t); 296 297static void re_set_jumbo (struct rl_softc *, int); 298static void re_set_rxmode (struct rl_softc *); 299static void re_reset (struct rl_softc *); 300static void re_setwol (struct rl_softc *); 301static void re_clrwol (struct rl_softc *); 302static void re_set_linkspeed (struct rl_softc *); 303 304#ifdef DEV_NETMAP /* see ixgbe.c for details */ 305#include <dev/netmap/if_re_netmap.h> 306#endif /* !DEV_NETMAP */ 307 308#ifdef RE_DIAG 309static int re_diag (struct rl_softc *); 310#endif 311 312static void re_add_sysctls (struct rl_softc *); 313static int re_sysctl_stats (SYSCTL_HANDLER_ARGS); 314static int sysctl_int_range (SYSCTL_HANDLER_ARGS, int, int); 315static int sysctl_hw_re_int_mod (SYSCTL_HANDLER_ARGS); 316 317static device_method_t re_methods[] = { 318 /* Device interface */ 319 DEVMETHOD(device_probe, re_probe), 320 DEVMETHOD(device_attach, re_attach), 321 DEVMETHOD(device_detach, re_detach), 322 DEVMETHOD(device_suspend, re_suspend), 323 DEVMETHOD(device_resume, re_resume), 324 DEVMETHOD(device_shutdown, re_shutdown), 325 326 /* MII interface */ 327 DEVMETHOD(miibus_readreg, re_miibus_readreg), 328 DEVMETHOD(miibus_writereg, re_miibus_writereg), 329 DEVMETHOD(miibus_statchg, re_miibus_statchg), 330 331 DEVMETHOD_END 332}; 333 334static driver_t re_driver = { 335 "re", 336 re_methods, 337 sizeof(struct rl_softc) 338}; 339 340static devclass_t re_devclass; 341 342DRIVER_MODULE(re, pci, re_driver, re_devclass, 0, 0); 343DRIVER_MODULE(miibus, re, miibus_driver, miibus_devclass, 0, 0); 344 345#define EE_SET(x) \ 346 CSR_WRITE_1(sc, RL_EECMD, \ 347 CSR_READ_1(sc, RL_EECMD) | x) 348 349#define EE_CLR(x) \ 350 CSR_WRITE_1(sc, RL_EECMD, \ 351 CSR_READ_1(sc, RL_EECMD) & ~x) 352 353/* 354 * Send a read command and address to the EEPROM, check for ACK. 355 */ 356static void 357re_eeprom_putbyte(struct rl_softc *sc, int addr) 358{ 359 int d, i; 360 361 d = addr | (RL_9346_READ << sc->rl_eewidth); 362 363 /* 364 * Feed in each bit and strobe the clock. 365 */ 366 367 for (i = 1 << (sc->rl_eewidth + 3); i; i >>= 1) { 368 if (d & i) { 369 EE_SET(RL_EE_DATAIN); 370 } else { 371 EE_CLR(RL_EE_DATAIN); 372 } 373 DELAY(100); 374 EE_SET(RL_EE_CLK); 375 DELAY(150); 376 EE_CLR(RL_EE_CLK); 377 DELAY(100); 378 } 379} 380 381/* 382 * Read a word of data stored in the EEPROM at address 'addr.' 383 */ 384static void 385re_eeprom_getword(struct rl_softc *sc, int addr, u_int16_t *dest) 386{ 387 int i; 388 u_int16_t word = 0; 389 390 /* 391 * Send address of word we want to read. 392 */ 393 re_eeprom_putbyte(sc, addr); 394 395 /* 396 * Start reading bits from EEPROM. 397 */ 398 for (i = 0x8000; i; i >>= 1) { 399 EE_SET(RL_EE_CLK); 400 DELAY(100); 401 if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT) 402 word |= i; 403 EE_CLR(RL_EE_CLK); 404 DELAY(100); 405 } 406 407 *dest = word; 408} 409 410/* 411 * Read a sequence of words from the EEPROM. 412 */ 413static void 414re_read_eeprom(struct rl_softc *sc, caddr_t dest, int off, int cnt) 415{ 416 int i; 417 u_int16_t word = 0, *ptr; 418 419 CSR_SETBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM); 420 421 DELAY(100); 422 423 for (i = 0; i < cnt; i++) { 424 CSR_SETBIT_1(sc, RL_EECMD, RL_EE_SEL); 425 re_eeprom_getword(sc, off + i, &word); 426 CSR_CLRBIT_1(sc, RL_EECMD, RL_EE_SEL); 427 ptr = (u_int16_t *)(dest + (i * 2)); 428 *ptr = word; 429 } 430 431 CSR_CLRBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM); 432} 433 434static int 435re_gmii_readreg(device_t dev, int phy, int reg) 436{ 437 struct rl_softc *sc; 438 u_int32_t rval; 439 int i; 440 441 sc = device_get_softc(dev); 442 443 /* Let the rgephy driver read the GMEDIASTAT register */ 444 445 if (reg == RL_GMEDIASTAT) { 446 rval = CSR_READ_1(sc, RL_GMEDIASTAT); 447 return (rval); 448 } 449 450 CSR_WRITE_4(sc, RL_PHYAR, reg << 16); 451 452 for (i = 0; i < RL_PHY_TIMEOUT; i++) { 453 rval = CSR_READ_4(sc, RL_PHYAR); 454 if (rval & RL_PHYAR_BUSY) 455 break; 456 DELAY(25); 457 } 458 459 if (i == RL_PHY_TIMEOUT) { 460 device_printf(sc->rl_dev, "PHY read failed\n"); 461 return (0); 462 } 463 464 /* 465 * Controller requires a 20us delay to process next MDIO request. 466 */ 467 DELAY(20); 468 469 return (rval & RL_PHYAR_PHYDATA); 470} 471 472static int 473re_gmii_writereg(device_t dev, int phy, int reg, int data) 474{ 475 struct rl_softc *sc; 476 u_int32_t rval; 477 int i; 478 479 sc = device_get_softc(dev); 480 481 CSR_WRITE_4(sc, RL_PHYAR, (reg << 16) | 482 (data & RL_PHYAR_PHYDATA) | RL_PHYAR_BUSY); 483 484 for (i = 0; i < RL_PHY_TIMEOUT; i++) { 485 rval = CSR_READ_4(sc, RL_PHYAR); 486 if (!(rval & RL_PHYAR_BUSY)) 487 break; 488 DELAY(25); 489 } 490 491 if (i == RL_PHY_TIMEOUT) { 492 device_printf(sc->rl_dev, "PHY write failed\n"); 493 return (0); 494 } 495 496 /* 497 * Controller requires a 20us delay to process next MDIO request. 498 */ 499 DELAY(20); 500 501 return (0); 502} 503 504static int 505re_miibus_readreg(device_t dev, int phy, int reg) 506{ 507 struct rl_softc *sc; 508 u_int16_t rval = 0; 509 u_int16_t re8139_reg = 0; 510 511 sc = device_get_softc(dev); 512 513 if (sc->rl_type == RL_8169) { 514 rval = re_gmii_readreg(dev, phy, reg); 515 return (rval); 516 } 517 518 switch (reg) { 519 case MII_BMCR: 520 re8139_reg = RL_BMCR; 521 break; 522 case MII_BMSR: 523 re8139_reg = RL_BMSR; 524 break; 525 case MII_ANAR: 526 re8139_reg = RL_ANAR; 527 break; 528 case MII_ANER: 529 re8139_reg = RL_ANER; 530 break; 531 case MII_ANLPAR: 532 re8139_reg = RL_LPAR; 533 break; 534 case MII_PHYIDR1: 535 case MII_PHYIDR2: 536 return (0); 537 /* 538 * Allow the rlphy driver to read the media status 539 * register. If we have a link partner which does not 540 * support NWAY, this is the register which will tell 541 * us the results of parallel detection. 542 */ 543 case RL_MEDIASTAT: 544 rval = CSR_READ_1(sc, RL_MEDIASTAT); 545 return (rval); 546 default: 547 device_printf(sc->rl_dev, "bad phy register\n"); 548 return (0); 549 } 550 rval = CSR_READ_2(sc, re8139_reg); 551 if (sc->rl_type == RL_8139CPLUS && re8139_reg == RL_BMCR) { 552 /* 8139C+ has different bit layout. */ 553 rval &= ~(BMCR_LOOP | BMCR_ISO); 554 } 555 return (rval); 556} 557 558static int 559re_miibus_writereg(device_t dev, int phy, int reg, int data) 560{ 561 struct rl_softc *sc; 562 u_int16_t re8139_reg = 0; 563 int rval = 0; 564 565 sc = device_get_softc(dev); 566 567 if (sc->rl_type == RL_8169) { 568 rval = re_gmii_writereg(dev, phy, reg, data); 569 return (rval); 570 } 571 572 switch (reg) { 573 case MII_BMCR: 574 re8139_reg = RL_BMCR; 575 if (sc->rl_type == RL_8139CPLUS) { 576 /* 8139C+ has different bit layout. */ 577 data &= ~(BMCR_LOOP | BMCR_ISO); 578 } 579 break; 580 case MII_BMSR: 581 re8139_reg = RL_BMSR; 582 break; 583 case MII_ANAR: 584 re8139_reg = RL_ANAR; 585 break; 586 case MII_ANER: 587 re8139_reg = RL_ANER; 588 break; 589 case MII_ANLPAR: 590 re8139_reg = RL_LPAR; 591 break; 592 case MII_PHYIDR1: 593 case MII_PHYIDR2: 594 return (0); 595 break; 596 default: 597 device_printf(sc->rl_dev, "bad phy register\n"); 598 return (0); 599 } 600 CSR_WRITE_2(sc, re8139_reg, data); 601 return (0); 602} 603 604static void 605re_miibus_statchg(device_t dev) 606{ 607 struct rl_softc *sc; 608 struct ifnet *ifp; 609 struct mii_data *mii; 610 611 sc = device_get_softc(dev); 612 mii = device_get_softc(sc->rl_miibus); 613 ifp = sc->rl_ifp; 614 if (mii == NULL || ifp == NULL || 615 (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) 616 return; 617 618 sc->rl_flags &= ~RL_FLAG_LINK; 619 if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) == 620 (IFM_ACTIVE | IFM_AVALID)) { 621 switch (IFM_SUBTYPE(mii->mii_media_active)) { 622 case IFM_10_T: 623 case IFM_100_TX: 624 sc->rl_flags |= RL_FLAG_LINK; 625 break; 626 case IFM_1000_T: 627 if ((sc->rl_flags & RL_FLAG_FASTETHER) != 0) 628 break; 629 sc->rl_flags |= RL_FLAG_LINK; 630 break; 631 default: 632 break; 633 } 634 } 635 /* 636 * RealTek controllers does not provide any interface to 637 * Tx/Rx MACs for resolved speed, duplex and flow-control 638 * parameters. 639 */ 640} 641 642/* 643 * Set the RX configuration and 64-bit multicast hash filter. 644 */ 645static void 646re_set_rxmode(struct rl_softc *sc) 647{ 648 struct ifnet *ifp; 649 struct ifmultiaddr *ifma; 650 uint32_t hashes[2] = { 0, 0 }; 651 uint32_t h, rxfilt; 652 653 RL_LOCK_ASSERT(sc); 654 655 ifp = sc->rl_ifp; 656 657 rxfilt = RL_RXCFG_CONFIG | RL_RXCFG_RX_INDIV | RL_RXCFG_RX_BROAD; 658 if ((sc->rl_flags & RL_FLAG_EARLYOFF) != 0) 659 rxfilt |= RL_RXCFG_EARLYOFF; 660 else if ((sc->rl_flags & RL_FLAG_EARLYOFFV2) != 0) 661 rxfilt |= RL_RXCFG_EARLYOFFV2; 662 663 if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) { 664 if (ifp->if_flags & IFF_PROMISC) 665 rxfilt |= RL_RXCFG_RX_ALLPHYS; 666 /* 667 * Unlike other hardwares, we have to explicitly set 668 * RL_RXCFG_RX_MULTI to receive multicast frames in 669 * promiscuous mode. 670 */ 671 rxfilt |= RL_RXCFG_RX_MULTI; 672 hashes[0] = hashes[1] = 0xffffffff; 673 goto done; 674 } 675 676 if_maddr_rlock(ifp); 677 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 678 if (ifma->ifma_addr->sa_family != AF_LINK) 679 continue; 680 h = ether_crc32_be(LLADDR((struct sockaddr_dl *) 681 ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; 682 if (h < 32) 683 hashes[0] |= (1 << h); 684 else 685 hashes[1] |= (1 << (h - 32)); 686 } 687 if_maddr_runlock(ifp); 688 689 if (hashes[0] != 0 || hashes[1] != 0) { 690 /* 691 * For some unfathomable reason, RealTek decided to 692 * reverse the order of the multicast hash registers 693 * in the PCI Express parts. This means we have to 694 * write the hash pattern in reverse order for those 695 * devices. 696 */ 697 if ((sc->rl_flags & RL_FLAG_PCIE) != 0) { 698 h = bswap32(hashes[0]); 699 hashes[0] = bswap32(hashes[1]); 700 hashes[1] = h; 701 } 702 rxfilt |= RL_RXCFG_RX_MULTI; 703 } 704 705done: 706 CSR_WRITE_4(sc, RL_MAR0, hashes[0]); 707 CSR_WRITE_4(sc, RL_MAR4, hashes[1]); 708 CSR_WRITE_4(sc, RL_RXCFG, rxfilt); 709} 710 711static void 712re_reset(struct rl_softc *sc) 713{ 714 int i; 715 716 RL_LOCK_ASSERT(sc); 717 718 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET); 719 720 for (i = 0; i < RL_TIMEOUT; i++) { 721 DELAY(10); 722 if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET)) 723 break; 724 } 725 if (i == RL_TIMEOUT) 726 device_printf(sc->rl_dev, "reset never completed!\n"); 727 728 if ((sc->rl_flags & RL_FLAG_MACRESET) != 0) 729 CSR_WRITE_1(sc, 0x82, 1); 730 if (sc->rl_hwrev->rl_rev == RL_HWREV_8169S) 731 re_gmii_writereg(sc->rl_dev, 1, 0x0b, 0); 732} 733 734#ifdef RE_DIAG 735 736/* 737 * The following routine is designed to test for a defect on some 738 * 32-bit 8169 cards. Some of these NICs have the REQ64# and ACK64# 739 * lines connected to the bus, however for a 32-bit only card, they 740 * should be pulled high. The result of this defect is that the 741 * NIC will not work right if you plug it into a 64-bit slot: DMA 742 * operations will be done with 64-bit transfers, which will fail 743 * because the 64-bit data lines aren't connected. 744 * 745 * There's no way to work around this (short of talking a soldering 746 * iron to the board), however we can detect it. The method we use 747 * here is to put the NIC into digital loopback mode, set the receiver 748 * to promiscuous mode, and then try to send a frame. We then compare 749 * the frame data we sent to what was received. If the data matches, 750 * then the NIC is working correctly, otherwise we know the user has 751 * a defective NIC which has been mistakenly plugged into a 64-bit PCI 752 * slot. In the latter case, there's no way the NIC can work correctly, 753 * so we print out a message on the console and abort the device attach. 754 */ 755 756static int 757re_diag(struct rl_softc *sc) 758{ 759 struct ifnet *ifp = sc->rl_ifp; 760 struct mbuf *m0; 761 struct ether_header *eh; 762 struct rl_desc *cur_rx; 763 u_int16_t status; 764 u_int32_t rxstat; 765 int total_len, i, error = 0, phyaddr; 766 u_int8_t dst[] = { 0x00, 'h', 'e', 'l', 'l', 'o' }; 767 u_int8_t src[] = { 0x00, 'w', 'o', 'r', 'l', 'd' }; 768 769 /* Allocate a single mbuf */ 770 MGETHDR(m0, M_NOWAIT, MT_DATA); 771 if (m0 == NULL) 772 return (ENOBUFS); 773 774 RL_LOCK(sc); 775 776 /* 777 * Initialize the NIC in test mode. This sets the chip up 778 * so that it can send and receive frames, but performs the 779 * following special functions: 780 * - Puts receiver in promiscuous mode 781 * - Enables digital loopback mode 782 * - Leaves interrupts turned off 783 */ 784 785 ifp->if_flags |= IFF_PROMISC; 786 sc->rl_testmode = 1; 787 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 788 re_init_locked(sc); 789 sc->rl_flags |= RL_FLAG_LINK; 790 if (sc->rl_type == RL_8169) 791 phyaddr = 1; 792 else 793 phyaddr = 0; 794 795 re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_RESET); 796 for (i = 0; i < RL_TIMEOUT; i++) { 797 status = re_miibus_readreg(sc->rl_dev, phyaddr, MII_BMCR); 798 if (!(status & BMCR_RESET)) 799 break; 800 } 801 802 re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_LOOP); 803 CSR_WRITE_2(sc, RL_ISR, RL_INTRS); 804 805 DELAY(100000); 806 807 /* Put some data in the mbuf */ 808 809 eh = mtod(m0, struct ether_header *); 810 bcopy ((char *)&dst, eh->ether_dhost, ETHER_ADDR_LEN); 811 bcopy ((char *)&src, eh->ether_shost, ETHER_ADDR_LEN); 812 eh->ether_type = htons(ETHERTYPE_IP); 813 m0->m_pkthdr.len = m0->m_len = ETHER_MIN_LEN - ETHER_CRC_LEN; 814 815 /* 816 * Queue the packet, start transmission. 817 * Note: IF_HANDOFF() ultimately calls re_start() for us. 818 */ 819 820 CSR_WRITE_2(sc, RL_ISR, 0xFFFF); 821 RL_UNLOCK(sc); 822 /* XXX: re_diag must not be called when in ALTQ mode */ 823 IF_HANDOFF(&ifp->if_snd, m0, ifp); 824 RL_LOCK(sc); 825 m0 = NULL; 826 827 /* Wait for it to propagate through the chip */ 828 829 DELAY(100000); 830 for (i = 0; i < RL_TIMEOUT; i++) { 831 status = CSR_READ_2(sc, RL_ISR); 832 CSR_WRITE_2(sc, RL_ISR, status); 833 if ((status & (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK)) == 834 (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK)) 835 break; 836 DELAY(10); 837 } 838 839 if (i == RL_TIMEOUT) { 840 device_printf(sc->rl_dev, 841 "diagnostic failed, failed to receive packet in" 842 " loopback mode\n"); 843 error = EIO; 844 goto done; 845 } 846 847 /* 848 * The packet should have been dumped into the first 849 * entry in the RX DMA ring. Grab it from there. 850 */ 851 852 bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, 853 sc->rl_ldata.rl_rx_list_map, 854 BUS_DMASYNC_POSTREAD); 855 bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, 856 sc->rl_ldata.rl_rx_desc[0].rx_dmamap, 857 BUS_DMASYNC_POSTREAD); 858 bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, 859 sc->rl_ldata.rl_rx_desc[0].rx_dmamap); 860 861 m0 = sc->rl_ldata.rl_rx_desc[0].rx_m; 862 sc->rl_ldata.rl_rx_desc[0].rx_m = NULL; 863 eh = mtod(m0, struct ether_header *); 864 865 cur_rx = &sc->rl_ldata.rl_rx_list[0]; 866 total_len = RL_RXBYTES(cur_rx); 867 rxstat = le32toh(cur_rx->rl_cmdstat); 868 869 if (total_len != ETHER_MIN_LEN) { 870 device_printf(sc->rl_dev, 871 "diagnostic failed, received short packet\n"); 872 error = EIO; 873 goto done; 874 } 875 876 /* Test that the received packet data matches what we sent. */ 877 878 if (bcmp((char *)&eh->ether_dhost, (char *)&dst, ETHER_ADDR_LEN) || 879 bcmp((char *)&eh->ether_shost, (char *)&src, ETHER_ADDR_LEN) || 880 ntohs(eh->ether_type) != ETHERTYPE_IP) { 881 device_printf(sc->rl_dev, "WARNING, DMA FAILURE!\n"); 882 device_printf(sc->rl_dev, "expected TX data: %6D/%6D/0x%x\n", 883 dst, ":", src, ":", ETHERTYPE_IP); 884 device_printf(sc->rl_dev, "received RX data: %6D/%6D/0x%x\n", 885 eh->ether_dhost, ":", eh->ether_shost, ":", 886 ntohs(eh->ether_type)); 887 device_printf(sc->rl_dev, "You may have a defective 32-bit " 888 "NIC plugged into a 64-bit PCI slot.\n"); 889 device_printf(sc->rl_dev, "Please re-install the NIC in a " 890 "32-bit slot for proper operation.\n"); 891 device_printf(sc->rl_dev, "Read the re(4) man page for more " 892 "details.\n"); 893 error = EIO; 894 } 895 896done: 897 /* Turn interface off, release resources */ 898 899 sc->rl_testmode = 0; 900 sc->rl_flags &= ~RL_FLAG_LINK; 901 ifp->if_flags &= ~IFF_PROMISC; 902 re_stop(sc); 903 if (m0 != NULL) 904 m_freem(m0); 905 906 RL_UNLOCK(sc); 907 908 return (error); 909} 910 911#endif 912 913/* 914 * Probe for a RealTek 8139C+/8169/8110 chip. Check the PCI vendor and device 915 * IDs against our list and return a device name if we find a match. 916 */ 917static int 918re_probe(device_t dev) 919{ 920 const struct rl_type *t; 921 uint16_t devid, vendor; 922 uint16_t revid, sdevid; 923 int i; 924 925 vendor = pci_get_vendor(dev); 926 devid = pci_get_device(dev); 927 revid = pci_get_revid(dev); 928 sdevid = pci_get_subdevice(dev); 929 930 if (vendor == LINKSYS_VENDORID && devid == LINKSYS_DEVICEID_EG1032) { 931 if (sdevid != LINKSYS_SUBDEVICE_EG1032_REV3) { 932 /* 933 * Only attach to rev. 3 of the Linksys EG1032 adapter. 934 * Rev. 2 is supported by sk(4). 935 */ 936 return (ENXIO); 937 } 938 } 939 940 if (vendor == RT_VENDORID && devid == RT_DEVICEID_8139) { 941 if (revid != 0x20) { 942 /* 8139, let rl(4) take care of this device. */ 943 return (ENXIO); 944 } 945 } 946 947 t = re_devs; 948 for (i = 0; i < sizeof(re_devs) / sizeof(re_devs[0]); i++, t++) { 949 if (vendor == t->rl_vid && devid == t->rl_did) { 950 device_set_desc(dev, t->rl_name); 951 return (BUS_PROBE_DEFAULT); 952 } 953 } 954 955 return (ENXIO); 956} 957 958/* 959 * Map a single buffer address. 960 */ 961 962static void 963re_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 964{ 965 bus_addr_t *addr; 966 967 if (error) 968 return; 969 970 KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); 971 addr = arg; 972 *addr = segs->ds_addr; 973} 974 975static int 976re_allocmem(device_t dev, struct rl_softc *sc) 977{ 978 bus_addr_t lowaddr; 979 bus_size_t rx_list_size, tx_list_size; 980 int error; 981 int i; 982 983 rx_list_size = sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc); 984 tx_list_size = sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc); 985 986 /* 987 * Allocate the parent bus DMA tag appropriate for PCI. 988 * In order to use DAC, RL_CPLUSCMD_PCI_DAC bit of RL_CPLUS_CMD 989 * register should be set. However some RealTek chips are known 990 * to be buggy on DAC handling, therefore disable DAC by limiting 991 * DMA address space to 32bit. PCIe variants of RealTek chips 992 * may not have the limitation. 993 */ 994 lowaddr = BUS_SPACE_MAXADDR; 995 if ((sc->rl_flags & RL_FLAG_PCIE) == 0) 996 lowaddr = BUS_SPACE_MAXADDR_32BIT; 997 error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, 998 lowaddr, BUS_SPACE_MAXADDR, NULL, NULL, 999 BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, 1000 NULL, NULL, &sc->rl_parent_tag); 1001 if (error) { 1002 device_printf(dev, "could not allocate parent DMA tag\n"); 1003 return (error); 1004 } 1005 1006 /* 1007 * Allocate map for TX mbufs. 1008 */ 1009 error = bus_dma_tag_create(sc->rl_parent_tag, 1, 0, 1010 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, 1011 NULL, MCLBYTES * RL_NTXSEGS, RL_NTXSEGS, 4096, 0, 1012 NULL, NULL, &sc->rl_ldata.rl_tx_mtag); 1013 if (error) { 1014 device_printf(dev, "could not allocate TX DMA tag\n"); 1015 return (error); 1016 } 1017 1018 /* 1019 * Allocate map for RX mbufs. 1020 */ 1021 1022 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) { 1023 error = bus_dma_tag_create(sc->rl_parent_tag, sizeof(uint64_t), 1024 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, 1025 MJUM9BYTES, 1, MJUM9BYTES, 0, NULL, NULL, 1026 &sc->rl_ldata.rl_jrx_mtag); 1027 if (error) { 1028 device_printf(dev, 1029 "could not allocate jumbo RX DMA tag\n"); 1030 return (error); 1031 } 1032 } 1033 error = bus_dma_tag_create(sc->rl_parent_tag, sizeof(uint64_t), 0, 1034 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, 1035 MCLBYTES, 1, MCLBYTES, 0, NULL, NULL, &sc->rl_ldata.rl_rx_mtag); 1036 if (error) { 1037 device_printf(dev, "could not allocate RX DMA tag\n"); 1038 return (error); 1039 } 1040 1041 /* 1042 * Allocate map for TX descriptor list. 1043 */ 1044 error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN, 1045 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, 1046 NULL, tx_list_size, 1, tx_list_size, 0, 1047 NULL, NULL, &sc->rl_ldata.rl_tx_list_tag); 1048 if (error) { 1049 device_printf(dev, "could not allocate TX DMA ring tag\n"); 1050 return (error); 1051 } 1052 1053 /* Allocate DMA'able memory for the TX ring */ 1054 1055 error = bus_dmamem_alloc(sc->rl_ldata.rl_tx_list_tag, 1056 (void **)&sc->rl_ldata.rl_tx_list, 1057 BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, 1058 &sc->rl_ldata.rl_tx_list_map); 1059 if (error) { 1060 device_printf(dev, "could not allocate TX DMA ring\n"); 1061 return (error); 1062 } 1063 1064 /* Load the map for the TX ring. */ 1065 1066 sc->rl_ldata.rl_tx_list_addr = 0; 1067 error = bus_dmamap_load(sc->rl_ldata.rl_tx_list_tag, 1068 sc->rl_ldata.rl_tx_list_map, sc->rl_ldata.rl_tx_list, 1069 tx_list_size, re_dma_map_addr, 1070 &sc->rl_ldata.rl_tx_list_addr, BUS_DMA_NOWAIT); 1071 if (error != 0 || sc->rl_ldata.rl_tx_list_addr == 0) { 1072 device_printf(dev, "could not load TX DMA ring\n"); 1073 return (ENOMEM); 1074 } 1075 1076 /* Create DMA maps for TX buffers */ 1077 1078 for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) { 1079 error = bus_dmamap_create(sc->rl_ldata.rl_tx_mtag, 0, 1080 &sc->rl_ldata.rl_tx_desc[i].tx_dmamap); 1081 if (error) { 1082 device_printf(dev, "could not create DMA map for TX\n"); 1083 return (error); 1084 } 1085 } 1086 1087 /* 1088 * Allocate map for RX descriptor list. 1089 */ 1090 error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN, 1091 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, 1092 NULL, rx_list_size, 1, rx_list_size, 0, 1093 NULL, NULL, &sc->rl_ldata.rl_rx_list_tag); 1094 if (error) { 1095 device_printf(dev, "could not create RX DMA ring tag\n"); 1096 return (error); 1097 } 1098 1099 /* Allocate DMA'able memory for the RX ring */ 1100 1101 error = bus_dmamem_alloc(sc->rl_ldata.rl_rx_list_tag, 1102 (void **)&sc->rl_ldata.rl_rx_list, 1103 BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, 1104 &sc->rl_ldata.rl_rx_list_map); 1105 if (error) { 1106 device_printf(dev, "could not allocate RX DMA ring\n"); 1107 return (error); 1108 } 1109 1110 /* Load the map for the RX ring. */ 1111 1112 sc->rl_ldata.rl_rx_list_addr = 0; 1113 error = bus_dmamap_load(sc->rl_ldata.rl_rx_list_tag, 1114 sc->rl_ldata.rl_rx_list_map, sc->rl_ldata.rl_rx_list, 1115 rx_list_size, re_dma_map_addr, 1116 &sc->rl_ldata.rl_rx_list_addr, BUS_DMA_NOWAIT); 1117 if (error != 0 || sc->rl_ldata.rl_rx_list_addr == 0) { 1118 device_printf(dev, "could not load RX DMA ring\n"); 1119 return (ENOMEM); 1120 } 1121 1122 /* Create DMA maps for RX buffers */ 1123 1124 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) { 1125 error = bus_dmamap_create(sc->rl_ldata.rl_jrx_mtag, 0, 1126 &sc->rl_ldata.rl_jrx_sparemap); 1127 if (error) { 1128 device_printf(dev, 1129 "could not create spare DMA map for jumbo RX\n"); 1130 return (error); 1131 } 1132 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 1133 error = bus_dmamap_create(sc->rl_ldata.rl_jrx_mtag, 0, 1134 &sc->rl_ldata.rl_jrx_desc[i].rx_dmamap); 1135 if (error) { 1136 device_printf(dev, 1137 "could not create DMA map for jumbo RX\n"); 1138 return (error); 1139 } 1140 } 1141 } 1142 error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0, 1143 &sc->rl_ldata.rl_rx_sparemap); 1144 if (error) { 1145 device_printf(dev, "could not create spare DMA map for RX\n"); 1146 return (error); 1147 } 1148 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 1149 error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0, 1150 &sc->rl_ldata.rl_rx_desc[i].rx_dmamap); 1151 if (error) { 1152 device_printf(dev, "could not create DMA map for RX\n"); 1153 return (error); 1154 } 1155 } 1156 1157 /* Create DMA map for statistics. */ 1158 error = bus_dma_tag_create(sc->rl_parent_tag, RL_DUMP_ALIGN, 0, 1159 BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, 1160 sizeof(struct rl_stats), 1, sizeof(struct rl_stats), 0, NULL, NULL, 1161 &sc->rl_ldata.rl_stag); 1162 if (error) { 1163 device_printf(dev, "could not create statistics DMA tag\n"); 1164 return (error); 1165 } 1166 /* Allocate DMA'able memory for statistics. */ 1167 error = bus_dmamem_alloc(sc->rl_ldata.rl_stag, 1168 (void **)&sc->rl_ldata.rl_stats, 1169 BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, 1170 &sc->rl_ldata.rl_smap); 1171 if (error) { 1172 device_printf(dev, 1173 "could not allocate statistics DMA memory\n"); 1174 return (error); 1175 } 1176 /* Load the map for statistics. */ 1177 sc->rl_ldata.rl_stats_addr = 0; 1178 error = bus_dmamap_load(sc->rl_ldata.rl_stag, sc->rl_ldata.rl_smap, 1179 sc->rl_ldata.rl_stats, sizeof(struct rl_stats), re_dma_map_addr, 1180 &sc->rl_ldata.rl_stats_addr, BUS_DMA_NOWAIT); 1181 if (error != 0 || sc->rl_ldata.rl_stats_addr == 0) { 1182 device_printf(dev, "could not load statistics DMA memory\n"); 1183 return (ENOMEM); 1184 } 1185 1186 return (0); 1187} 1188 1189/* 1190 * Attach the interface. Allocate softc structures, do ifmedia 1191 * setup and ethernet/BPF attach. 1192 */ 1193static int 1194re_attach(device_t dev) 1195{ 1196 u_char eaddr[ETHER_ADDR_LEN]; 1197 u_int16_t as[ETHER_ADDR_LEN / 2]; 1198 struct rl_softc *sc; 1199 struct ifnet *ifp; 1200 const struct rl_hwrev *hw_rev; 1201 u_int32_t cap, ctl; 1202 int hwrev; 1203 u_int16_t devid, re_did = 0; 1204 int error = 0, i, phy, rid; 1205 int msic, msixc, reg; 1206 uint8_t cfg; 1207 1208 sc = device_get_softc(dev); 1209 sc->rl_dev = dev; 1210 1211 mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 1212 MTX_DEF); 1213 callout_init_mtx(&sc->rl_stat_callout, &sc->rl_mtx, 0); 1214 1215 /* 1216 * Map control/status registers. 1217 */ 1218 pci_enable_busmaster(dev); 1219 1220 devid = pci_get_device(dev); 1221 /* 1222 * Prefer memory space register mapping over IO space. 1223 * Because RTL8169SC does not seem to work when memory mapping 1224 * is used always activate io mapping. 1225 */ 1226 if (devid == RT_DEVICEID_8169SC) 1227 prefer_iomap = 1; 1228 if (prefer_iomap == 0) { 1229 sc->rl_res_id = PCIR_BAR(1); 1230 sc->rl_res_type = SYS_RES_MEMORY; 1231 /* RTL8168/8101E seems to use different BARs. */ 1232 if (devid == RT_DEVICEID_8168 || devid == RT_DEVICEID_8101E) 1233 sc->rl_res_id = PCIR_BAR(2); 1234 } else { 1235 sc->rl_res_id = PCIR_BAR(0); 1236 sc->rl_res_type = SYS_RES_IOPORT; 1237 } 1238 sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type, 1239 &sc->rl_res_id, RF_ACTIVE); 1240 if (sc->rl_res == NULL && prefer_iomap == 0) { 1241 sc->rl_res_id = PCIR_BAR(0); 1242 sc->rl_res_type = SYS_RES_IOPORT; 1243 sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type, 1244 &sc->rl_res_id, RF_ACTIVE); 1245 } 1246 if (sc->rl_res == NULL) { 1247 device_printf(dev, "couldn't map ports/memory\n"); 1248 error = ENXIO; 1249 goto fail; 1250 } 1251 1252 sc->rl_btag = rman_get_bustag(sc->rl_res); 1253 sc->rl_bhandle = rman_get_bushandle(sc->rl_res); 1254 1255 msic = pci_msi_count(dev); 1256 msixc = pci_msix_count(dev); 1257 if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) { 1258 sc->rl_flags |= RL_FLAG_PCIE; 1259 sc->rl_expcap = reg; 1260 } 1261 if (bootverbose) { 1262 device_printf(dev, "MSI count : %d\n", msic); 1263 device_printf(dev, "MSI-X count : %d\n", msixc); 1264 } 1265 if (msix_disable > 0) 1266 msixc = 0; 1267 if (msi_disable > 0) 1268 msic = 0; 1269 /* Prefer MSI-X to MSI. */ 1270 if (msixc > 0) { 1271 msixc = RL_MSI_MESSAGES; 1272 rid = PCIR_BAR(4); 1273 sc->rl_res_pba = bus_alloc_resource_any(dev, SYS_RES_MEMORY, 1274 &rid, RF_ACTIVE); 1275 if (sc->rl_res_pba == NULL) { 1276 device_printf(sc->rl_dev, 1277 "could not allocate MSI-X PBA resource\n"); 1278 } 1279 if (sc->rl_res_pba != NULL && 1280 pci_alloc_msix(dev, &msixc) == 0) { 1281 if (msixc == RL_MSI_MESSAGES) { 1282 device_printf(dev, "Using %d MSI-X message\n", 1283 msixc); 1284 sc->rl_flags |= RL_FLAG_MSIX; 1285 } else 1286 pci_release_msi(dev); 1287 } 1288 if ((sc->rl_flags & RL_FLAG_MSIX) == 0) { 1289 if (sc->rl_res_pba != NULL) 1290 bus_release_resource(dev, SYS_RES_MEMORY, rid, 1291 sc->rl_res_pba); 1292 sc->rl_res_pba = NULL; 1293 msixc = 0; 1294 } 1295 } 1296 /* Prefer MSI to INTx. */ 1297 if (msixc == 0 && msic > 0) { 1298 msic = RL_MSI_MESSAGES; 1299 if (pci_alloc_msi(dev, &msic) == 0) { 1300 if (msic == RL_MSI_MESSAGES) { 1301 device_printf(dev, "Using %d MSI message\n", 1302 msic); 1303 sc->rl_flags |= RL_FLAG_MSI; 1304 /* Explicitly set MSI enable bit. */ 1305 CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); 1306 cfg = CSR_READ_1(sc, RL_CFG2); 1307 cfg |= RL_CFG2_MSI; 1308 CSR_WRITE_1(sc, RL_CFG2, cfg); 1309 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 1310 } else 1311 pci_release_msi(dev); 1312 } 1313 if ((sc->rl_flags & RL_FLAG_MSI) == 0) 1314 msic = 0; 1315 } 1316 1317 /* Allocate interrupt */ 1318 if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) == 0) { 1319 rid = 0; 1320 sc->rl_irq[0] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1321 RF_SHAREABLE | RF_ACTIVE); 1322 if (sc->rl_irq[0] == NULL) { 1323 device_printf(dev, "couldn't allocate IRQ resources\n"); 1324 error = ENXIO; 1325 goto fail; 1326 } 1327 } else { 1328 for (i = 0, rid = 1; i < RL_MSI_MESSAGES; i++, rid++) { 1329 sc->rl_irq[i] = bus_alloc_resource_any(dev, 1330 SYS_RES_IRQ, &rid, RF_ACTIVE); 1331 if (sc->rl_irq[i] == NULL) { 1332 device_printf(dev, 1333 "couldn't llocate IRQ resources for " 1334 "message %d\n", rid); 1335 error = ENXIO; 1336 goto fail; 1337 } 1338 } 1339 } 1340 1341 if ((sc->rl_flags & RL_FLAG_MSI) == 0) { 1342 CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); 1343 cfg = CSR_READ_1(sc, RL_CFG2); 1344 if ((cfg & RL_CFG2_MSI) != 0) { 1345 device_printf(dev, "turning off MSI enable bit.\n"); 1346 cfg &= ~RL_CFG2_MSI; 1347 CSR_WRITE_1(sc, RL_CFG2, cfg); 1348 } 1349 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 1350 } 1351 1352 /* Disable ASPM L0S/L1. */ 1353 if (sc->rl_expcap != 0) { 1354 cap = pci_read_config(dev, sc->rl_expcap + 1355 PCIER_LINK_CAP, 2); 1356 if ((cap & PCIEM_LINK_CAP_ASPM) != 0) { 1357 ctl = pci_read_config(dev, sc->rl_expcap + 1358 PCIER_LINK_CTL, 2); 1359 if ((ctl & 0x0003) != 0) { 1360 ctl &= ~0x0003; 1361 pci_write_config(dev, sc->rl_expcap + 1362 PCIER_LINK_CTL, ctl, 2); 1363 device_printf(dev, "ASPM disabled\n"); 1364 } 1365 } else 1366 device_printf(dev, "no ASPM capability\n"); 1367 } 1368 1369 hw_rev = re_hwrevs; 1370 hwrev = CSR_READ_4(sc, RL_TXCFG); 1371 switch (hwrev & 0x70000000) { 1372 case 0x00000000: 1373 case 0x10000000: 1374 device_printf(dev, "Chip rev. 0x%08x\n", hwrev & 0xfc800000); 1375 hwrev &= (RL_TXCFG_HWREV | 0x80000000); 1376 break; 1377 default: 1378 device_printf(dev, "Chip rev. 0x%08x\n", hwrev & 0x7c800000); 1379 sc->rl_macrev = hwrev & 0x00700000; 1380 hwrev &= RL_TXCFG_HWREV; 1381 break; 1382 } 1383 device_printf(dev, "MAC rev. 0x%08x\n", sc->rl_macrev); 1384 while (hw_rev->rl_desc != NULL) { 1385 if (hw_rev->rl_rev == hwrev) { 1386 sc->rl_type = hw_rev->rl_type; 1387 sc->rl_hwrev = hw_rev; 1388 break; 1389 } 1390 hw_rev++; 1391 } 1392 if (hw_rev->rl_desc == NULL) { 1393 device_printf(dev, "Unknown H/W revision: 0x%08x\n", hwrev); 1394 error = ENXIO; 1395 goto fail; 1396 } 1397 1398 switch (hw_rev->rl_rev) { 1399 case RL_HWREV_8139CPLUS: 1400 sc->rl_flags |= RL_FLAG_FASTETHER | RL_FLAG_AUTOPAD; 1401 break; 1402 case RL_HWREV_8100E: 1403 case RL_HWREV_8101E: 1404 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_FASTETHER; 1405 break; 1406 case RL_HWREV_8102E: 1407 case RL_HWREV_8102EL: 1408 case RL_HWREV_8102EL_SPIN1: 1409 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | RL_FLAG_DESCV2 | 1410 RL_FLAG_MACSTAT | RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | 1411 RL_FLAG_AUTOPAD; 1412 break; 1413 case RL_HWREV_8103E: 1414 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | RL_FLAG_DESCV2 | 1415 RL_FLAG_MACSTAT | RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | 1416 RL_FLAG_AUTOPAD | RL_FLAG_MACSLEEP; 1417 break; 1418 case RL_HWREV_8401E: 1419 case RL_HWREV_8105E: 1420 case RL_HWREV_8105E_SPIN1: 1421 case RL_HWREV_8106E: 1422 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM | 1423 RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | 1424 RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD; 1425 break; 1426 case RL_HWREV_8402: 1427 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM | 1428 RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | 1429 RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD | 1430 RL_FLAG_CMDSTOP_WAIT_TXQ; 1431 break; 1432 case RL_HWREV_8168B_SPIN1: 1433 case RL_HWREV_8168B_SPIN2: 1434 sc->rl_flags |= RL_FLAG_WOLRXENB; 1435 /* FALLTHROUGH */ 1436 case RL_HWREV_8168B_SPIN3: 1437 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_MACSTAT; 1438 break; 1439 case RL_HWREV_8168C_SPIN2: 1440 sc->rl_flags |= RL_FLAG_MACSLEEP; 1441 /* FALLTHROUGH */ 1442 case RL_HWREV_8168C: 1443 if (sc->rl_macrev == 0x00200000) 1444 sc->rl_flags |= RL_FLAG_MACSLEEP; 1445 /* FALLTHROUGH */ 1446 case RL_HWREV_8168CP: 1447 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | 1448 RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP | 1449 RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 | RL_FLAG_WOL_MANLINK; 1450 break; 1451 case RL_HWREV_8168D: 1452 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM | 1453 RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | 1454 RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 | 1455 RL_FLAG_WOL_MANLINK; 1456 break; 1457 case RL_HWREV_8168DP: 1458 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | 1459 RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_AUTOPAD | 1460 RL_FLAG_JUMBOV2 | RL_FLAG_WAIT_TXPOLL | RL_FLAG_WOL_MANLINK; 1461 break; 1462 case RL_HWREV_8168E: 1463 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM | 1464 RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | 1465 RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 | 1466 RL_FLAG_WOL_MANLINK; 1467 break; 1468 case RL_HWREV_8168E_VL: 1469 case RL_HWREV_8168F: 1470 sc->rl_flags |= RL_FLAG_EARLYOFF; 1471 /* FALLTHROUGH */ 1472 case RL_HWREV_8411: 1473 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | 1474 RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP | 1475 RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 | 1476 RL_FLAG_CMDSTOP_WAIT_TXQ | RL_FLAG_WOL_MANLINK; 1477 break; 1478 case RL_HWREV_8168EP: 1479 case RL_HWREV_8168G: 1480 case RL_HWREV_8411B: 1481 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | 1482 RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP | 1483 RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 | 1484 RL_FLAG_CMDSTOP_WAIT_TXQ | RL_FLAG_WOL_MANLINK | 1485 RL_FLAG_EARLYOFFV2 | RL_FLAG_RXDV_GATED; 1486 break; 1487 case RL_HWREV_8168GU: 1488 if (pci_get_device(dev) == RT_DEVICEID_8101E) { 1489 /* RTL8106EUS */ 1490 sc->rl_flags |= RL_FLAG_FASTETHER; 1491 } else 1492 sc->rl_flags |= RL_FLAG_JUMBOV2 | RL_FLAG_WOL_MANLINK; 1493 1494 sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | 1495 RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP | 1496 RL_FLAG_AUTOPAD | RL_FLAG_CMDSTOP_WAIT_TXQ | 1497 RL_FLAG_EARLYOFFV2 | RL_FLAG_RXDV_GATED; 1498 break; 1499 case RL_HWREV_8169_8110SB: 1500 case RL_HWREV_8169_8110SBL: 1501 case RL_HWREV_8169_8110SC: 1502 case RL_HWREV_8169_8110SCE: 1503 sc->rl_flags |= RL_FLAG_PHYWAKE; 1504 /* FALLTHROUGH */ 1505 case RL_HWREV_8169: 1506 case RL_HWREV_8169S: 1507 case RL_HWREV_8110S: 1508 sc->rl_flags |= RL_FLAG_MACRESET; 1509 break; 1510 default: 1511 break; 1512 } 1513 1514 if (sc->rl_hwrev->rl_rev == RL_HWREV_8139CPLUS) { 1515 sc->rl_cfg0 = RL_8139_CFG0; 1516 sc->rl_cfg1 = RL_8139_CFG1; 1517 sc->rl_cfg2 = 0; 1518 sc->rl_cfg3 = RL_8139_CFG3; 1519 sc->rl_cfg4 = RL_8139_CFG4; 1520 sc->rl_cfg5 = RL_8139_CFG5; 1521 } else { 1522 sc->rl_cfg0 = RL_CFG0; 1523 sc->rl_cfg1 = RL_CFG1; 1524 sc->rl_cfg2 = RL_CFG2; 1525 sc->rl_cfg3 = RL_CFG3; 1526 sc->rl_cfg4 = RL_CFG4; 1527 sc->rl_cfg5 = RL_CFG5; 1528 } 1529 1530 /* Reset the adapter. */ 1531 RL_LOCK(sc); 1532 re_reset(sc); 1533 RL_UNLOCK(sc); 1534 1535 /* Enable PME. */ 1536 CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); 1537 cfg = CSR_READ_1(sc, sc->rl_cfg1); 1538 cfg |= RL_CFG1_PME; 1539 CSR_WRITE_1(sc, sc->rl_cfg1, cfg); 1540 cfg = CSR_READ_1(sc, sc->rl_cfg5); 1541 cfg &= RL_CFG5_PME_STS; 1542 CSR_WRITE_1(sc, sc->rl_cfg5, cfg); 1543 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 1544 1545 if ((sc->rl_flags & RL_FLAG_PAR) != 0) { 1546 /* 1547 * XXX Should have a better way to extract station 1548 * address from EEPROM. 1549 */ 1550 for (i = 0; i < ETHER_ADDR_LEN; i++) 1551 eaddr[i] = CSR_READ_1(sc, RL_IDR0 + i); 1552 } else { 1553 sc->rl_eewidth = RL_9356_ADDR_LEN; 1554 re_read_eeprom(sc, (caddr_t)&re_did, 0, 1); 1555 if (re_did != 0x8129) 1556 sc->rl_eewidth = RL_9346_ADDR_LEN; 1557 1558 /* 1559 * Get station address from the EEPROM. 1560 */ 1561 re_read_eeprom(sc, (caddr_t)as, RL_EE_EADDR, 3); 1562 for (i = 0; i < ETHER_ADDR_LEN / 2; i++) 1563 as[i] = le16toh(as[i]); 1564 bcopy(as, eaddr, ETHER_ADDR_LEN); 1565 } 1566 1567 if (sc->rl_type == RL_8169) { 1568 /* Set RX length mask and number of descriptors. */ 1569 sc->rl_rxlenmask = RL_RDESC_STAT_GFRAGLEN; 1570 sc->rl_txstart = RL_GTXSTART; 1571 sc->rl_ldata.rl_tx_desc_cnt = RL_8169_TX_DESC_CNT; 1572 sc->rl_ldata.rl_rx_desc_cnt = RL_8169_RX_DESC_CNT; 1573 } else { 1574 /* Set RX length mask and number of descriptors. */ 1575 sc->rl_rxlenmask = RL_RDESC_STAT_FRAGLEN; 1576 sc->rl_txstart = RL_TXSTART; 1577 sc->rl_ldata.rl_tx_desc_cnt = RL_8139_TX_DESC_CNT; 1578 sc->rl_ldata.rl_rx_desc_cnt = RL_8139_RX_DESC_CNT; 1579 } 1580 1581 error = re_allocmem(dev, sc); 1582 if (error) 1583 goto fail; 1584 re_add_sysctls(sc); 1585 1586 ifp = sc->rl_ifp = if_alloc(IFT_ETHER); 1587 if (ifp == NULL) { 1588 device_printf(dev, "can not if_alloc()\n"); 1589 error = ENOSPC; 1590 goto fail; 1591 } 1592 1593 /* Take controller out of deep sleep mode. */ 1594 if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) { 1595 if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80) 1596 CSR_WRITE_1(sc, RL_GPIO, 1597 CSR_READ_1(sc, RL_GPIO) | 0x01); 1598 else 1599 CSR_WRITE_1(sc, RL_GPIO, 1600 CSR_READ_1(sc, RL_GPIO) & ~0x01); 1601 } 1602 1603 /* Take PHY out of power down mode. */ 1604 if ((sc->rl_flags & RL_FLAG_PHYWAKE_PM) != 0) { 1605 CSR_WRITE_1(sc, RL_PMCH, CSR_READ_1(sc, RL_PMCH) | 0x80); 1606 if (hw_rev->rl_rev == RL_HWREV_8401E) 1607 CSR_WRITE_1(sc, 0xD1, CSR_READ_1(sc, 0xD1) & ~0x08); 1608 } 1609 if ((sc->rl_flags & RL_FLAG_PHYWAKE) != 0) { 1610 re_gmii_writereg(dev, 1, 0x1f, 0); 1611 re_gmii_writereg(dev, 1, 0x0e, 0); 1612 } 1613 1614 ifp->if_softc = sc; 1615 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 1616 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1617 ifp->if_ioctl = re_ioctl; 1618 ifp->if_start = re_start; 1619 /* 1620 * RTL8168/8111C generates wrong IP checksummed frame if the 1621 * packet has IP options so disable TX checksum offloading. 1622 */ 1623 if (sc->rl_hwrev->rl_rev == RL_HWREV_8168C || 1624 sc->rl_hwrev->rl_rev == RL_HWREV_8168C_SPIN2 || 1625 sc->rl_hwrev->rl_rev == RL_HWREV_8168CP) { 1626 ifp->if_hwassist = 0; 1627 ifp->if_capabilities = IFCAP_RXCSUM | IFCAP_TSO4; 1628 } else { 1629 ifp->if_hwassist = CSUM_IP | CSUM_TCP | CSUM_UDP; 1630 ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_TSO4; 1631 } 1632 ifp->if_hwassist |= CSUM_TSO; 1633 ifp->if_capenable = ifp->if_capabilities; 1634 ifp->if_init = re_init; 1635 IFQ_SET_MAXLEN(&ifp->if_snd, RL_IFQ_MAXLEN); 1636 ifp->if_snd.ifq_drv_maxlen = RL_IFQ_MAXLEN; 1637 IFQ_SET_READY(&ifp->if_snd); 1638 1639 TASK_INIT(&sc->rl_inttask, 0, re_int_task, sc); 1640 1641#define RE_PHYAD_INTERNAL 0 1642 1643 /* Do MII setup. */ 1644 phy = RE_PHYAD_INTERNAL; 1645 if (sc->rl_type == RL_8169) 1646 phy = 1; 1647 error = mii_attach(dev, &sc->rl_miibus, ifp, re_ifmedia_upd, 1648 re_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, MIIF_DOPAUSE); 1649 if (error != 0) { 1650 device_printf(dev, "attaching PHYs failed\n"); 1651 goto fail; 1652 } 1653 1654 /* 1655 * Call MI attach routine. 1656 */ 1657 ether_ifattach(ifp, eaddr); 1658 1659 /* VLAN capability setup */ 1660 ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING; 1661 if (ifp->if_capabilities & IFCAP_HWCSUM) 1662 ifp->if_capabilities |= IFCAP_VLAN_HWCSUM; 1663 /* Enable WOL if PM is supported. */ 1664 if (pci_find_cap(sc->rl_dev, PCIY_PMG, ®) == 0) 1665 ifp->if_capabilities |= IFCAP_WOL; 1666 ifp->if_capenable = ifp->if_capabilities; 1667 ifp->if_capenable &= ~(IFCAP_WOL_UCAST | IFCAP_WOL_MCAST); 1668 /* 1669 * Don't enable TSO by default. It is known to generate 1670 * corrupted TCP segments(bad TCP options) under certain 1671 * circumtances. 1672 */ 1673 ifp->if_hwassist &= ~CSUM_TSO; 1674 ifp->if_capenable &= ~(IFCAP_TSO4 | IFCAP_VLAN_HWTSO); 1675#ifdef DEVICE_POLLING 1676 ifp->if_capabilities |= IFCAP_POLLING; 1677#endif 1678 /* 1679 * Tell the upper layer(s) we support long frames. 1680 * Must appear after the call to ether_ifattach() because 1681 * ether_ifattach() sets ifi_hdrlen to the default value. 1682 */ 1683 ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); 1684 1685#ifdef DEV_NETMAP 1686 re_netmap_attach(sc); 1687#endif /* DEV_NETMAP */ 1688#ifdef RE_DIAG 1689 /* 1690 * Perform hardware diagnostic on the original RTL8169. 1691 * Some 32-bit cards were incorrectly wired and would 1692 * malfunction if plugged into a 64-bit slot. 1693 */ 1694 1695 if (hwrev == RL_HWREV_8169) { 1696 error = re_diag(sc); 1697 if (error) { 1698 device_printf(dev, 1699 "attach aborted due to hardware diag failure\n"); 1700 ether_ifdetach(ifp); 1701 goto fail; 1702 } 1703 } 1704#endif 1705 1706#ifdef RE_TX_MODERATION 1707 intr_filter = 1; 1708#endif 1709 /* Hook interrupt last to avoid having to lock softc */ 1710 if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) != 0 && 1711 intr_filter == 0) { 1712 error = bus_setup_intr(dev, sc->rl_irq[0], 1713 INTR_TYPE_NET | INTR_MPSAFE, NULL, re_intr_msi, sc, 1714 &sc->rl_intrhand[0]); 1715 } else { 1716 error = bus_setup_intr(dev, sc->rl_irq[0], 1717 INTR_TYPE_NET | INTR_MPSAFE, re_intr, NULL, sc, 1718 &sc->rl_intrhand[0]); 1719 } 1720 if (error) { 1721 device_printf(dev, "couldn't set up irq\n"); 1722 ether_ifdetach(ifp); 1723 } 1724 1725fail: 1726 1727 if (error) 1728 re_detach(dev); 1729 1730 return (error); 1731} 1732 1733/* 1734 * Shutdown hardware and free up resources. This can be called any 1735 * time after the mutex has been initialized. It is called in both 1736 * the error case in attach and the normal detach case so it needs 1737 * to be careful about only freeing resources that have actually been 1738 * allocated. 1739 */ 1740static int 1741re_detach(device_t dev) 1742{ 1743 struct rl_softc *sc; 1744 struct ifnet *ifp; 1745 int i, rid; 1746 1747 sc = device_get_softc(dev); 1748 ifp = sc->rl_ifp; 1749 KASSERT(mtx_initialized(&sc->rl_mtx), ("re mutex not initialized")); 1750 1751 /* These should only be active if attach succeeded */ 1752 if (device_is_attached(dev)) { 1753#ifdef DEVICE_POLLING 1754 if (ifp->if_capenable & IFCAP_POLLING) 1755 ether_poll_deregister(ifp); 1756#endif 1757 RL_LOCK(sc); 1758#if 0 1759 sc->suspended = 1; 1760#endif 1761 re_stop(sc); 1762 RL_UNLOCK(sc); 1763 callout_drain(&sc->rl_stat_callout); 1764 taskqueue_drain(taskqueue_fast, &sc->rl_inttask); 1765 /* 1766 * Force off the IFF_UP flag here, in case someone 1767 * still had a BPF descriptor attached to this 1768 * interface. If they do, ether_ifdetach() will cause 1769 * the BPF code to try and clear the promisc mode 1770 * flag, which will bubble down to re_ioctl(), 1771 * which will try to call re_init() again. This will 1772 * turn the NIC back on and restart the MII ticker, 1773 * which will panic the system when the kernel tries 1774 * to invoke the re_tick() function that isn't there 1775 * anymore. 1776 */ 1777 ifp->if_flags &= ~IFF_UP; 1778 ether_ifdetach(ifp); 1779 } 1780 if (sc->rl_miibus) 1781 device_delete_child(dev, sc->rl_miibus); 1782 bus_generic_detach(dev); 1783 1784 /* 1785 * The rest is resource deallocation, so we should already be 1786 * stopped here. 1787 */ 1788 1789 if (sc->rl_intrhand[0] != NULL) { 1790 bus_teardown_intr(dev, sc->rl_irq[0], sc->rl_intrhand[0]); 1791 sc->rl_intrhand[0] = NULL; 1792 } 1793 if (ifp != NULL) { 1794#ifdef DEV_NETMAP 1795 netmap_detach(ifp); 1796#endif /* DEV_NETMAP */ 1797 if_free(ifp); 1798 } 1799 if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) == 0) 1800 rid = 0; 1801 else 1802 rid = 1; 1803 if (sc->rl_irq[0] != NULL) { 1804 bus_release_resource(dev, SYS_RES_IRQ, rid, sc->rl_irq[0]); 1805 sc->rl_irq[0] = NULL; 1806 } 1807 if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) != 0) 1808 pci_release_msi(dev); 1809 if (sc->rl_res_pba) { 1810 rid = PCIR_BAR(4); 1811 bus_release_resource(dev, SYS_RES_MEMORY, rid, sc->rl_res_pba); 1812 } 1813 if (sc->rl_res) 1814 bus_release_resource(dev, sc->rl_res_type, sc->rl_res_id, 1815 sc->rl_res); 1816 1817 /* Unload and free the RX DMA ring memory and map */ 1818 1819 if (sc->rl_ldata.rl_rx_list_tag) { 1820 if (sc->rl_ldata.rl_rx_list_map) 1821 bus_dmamap_unload(sc->rl_ldata.rl_rx_list_tag, 1822 sc->rl_ldata.rl_rx_list_map); 1823 if (sc->rl_ldata.rl_rx_list_map && sc->rl_ldata.rl_rx_list) 1824 bus_dmamem_free(sc->rl_ldata.rl_rx_list_tag, 1825 sc->rl_ldata.rl_rx_list, 1826 sc->rl_ldata.rl_rx_list_map); 1827 bus_dma_tag_destroy(sc->rl_ldata.rl_rx_list_tag); 1828 } 1829 1830 /* Unload and free the TX DMA ring memory and map */ 1831 1832 if (sc->rl_ldata.rl_tx_list_tag) { 1833 if (sc->rl_ldata.rl_tx_list_map) 1834 bus_dmamap_unload(sc->rl_ldata.rl_tx_list_tag, 1835 sc->rl_ldata.rl_tx_list_map); 1836 if (sc->rl_ldata.rl_tx_list_map && sc->rl_ldata.rl_tx_list) 1837 bus_dmamem_free(sc->rl_ldata.rl_tx_list_tag, 1838 sc->rl_ldata.rl_tx_list, 1839 sc->rl_ldata.rl_tx_list_map); 1840 bus_dma_tag_destroy(sc->rl_ldata.rl_tx_list_tag); 1841 } 1842 1843 /* Destroy all the RX and TX buffer maps */ 1844 1845 if (sc->rl_ldata.rl_tx_mtag) { 1846 for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) { 1847 if (sc->rl_ldata.rl_tx_desc[i].tx_dmamap) 1848 bus_dmamap_destroy(sc->rl_ldata.rl_tx_mtag, 1849 sc->rl_ldata.rl_tx_desc[i].tx_dmamap); 1850 } 1851 bus_dma_tag_destroy(sc->rl_ldata.rl_tx_mtag); 1852 } 1853 if (sc->rl_ldata.rl_rx_mtag) { 1854 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 1855 if (sc->rl_ldata.rl_rx_desc[i].rx_dmamap) 1856 bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag, 1857 sc->rl_ldata.rl_rx_desc[i].rx_dmamap); 1858 } 1859 if (sc->rl_ldata.rl_rx_sparemap) 1860 bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag, 1861 sc->rl_ldata.rl_rx_sparemap); 1862 bus_dma_tag_destroy(sc->rl_ldata.rl_rx_mtag); 1863 } 1864 if (sc->rl_ldata.rl_jrx_mtag) { 1865 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 1866 if (sc->rl_ldata.rl_jrx_desc[i].rx_dmamap) 1867 bus_dmamap_destroy(sc->rl_ldata.rl_jrx_mtag, 1868 sc->rl_ldata.rl_jrx_desc[i].rx_dmamap); 1869 } 1870 if (sc->rl_ldata.rl_jrx_sparemap) 1871 bus_dmamap_destroy(sc->rl_ldata.rl_jrx_mtag, 1872 sc->rl_ldata.rl_jrx_sparemap); 1873 bus_dma_tag_destroy(sc->rl_ldata.rl_jrx_mtag); 1874 } 1875 /* Unload and free the stats buffer and map */ 1876 1877 if (sc->rl_ldata.rl_stag) { 1878 if (sc->rl_ldata.rl_smap) 1879 bus_dmamap_unload(sc->rl_ldata.rl_stag, 1880 sc->rl_ldata.rl_smap); 1881 if (sc->rl_ldata.rl_smap && sc->rl_ldata.rl_stats) 1882 bus_dmamem_free(sc->rl_ldata.rl_stag, 1883 sc->rl_ldata.rl_stats, sc->rl_ldata.rl_smap); 1884 bus_dma_tag_destroy(sc->rl_ldata.rl_stag); 1885 } 1886 1887 if (sc->rl_parent_tag) 1888 bus_dma_tag_destroy(sc->rl_parent_tag); 1889 1890 mtx_destroy(&sc->rl_mtx); 1891 1892 return (0); 1893} 1894 1895static __inline void 1896re_discard_rxbuf(struct rl_softc *sc, int idx) 1897{ 1898 struct rl_desc *desc; 1899 struct rl_rxdesc *rxd; 1900 uint32_t cmdstat; 1901 1902 if (sc->rl_ifp->if_mtu > RL_MTU && 1903 (sc->rl_flags & RL_FLAG_JUMBOV2) != 0) 1904 rxd = &sc->rl_ldata.rl_jrx_desc[idx]; 1905 else 1906 rxd = &sc->rl_ldata.rl_rx_desc[idx]; 1907 desc = &sc->rl_ldata.rl_rx_list[idx]; 1908 desc->rl_vlanctl = 0; 1909 cmdstat = rxd->rx_size; 1910 if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1) 1911 cmdstat |= RL_RDESC_CMD_EOR; 1912 desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN); 1913} 1914 1915static int 1916re_newbuf(struct rl_softc *sc, int idx) 1917{ 1918 struct mbuf *m; 1919 struct rl_rxdesc *rxd; 1920 bus_dma_segment_t segs[1]; 1921 bus_dmamap_t map; 1922 struct rl_desc *desc; 1923 uint32_t cmdstat; 1924 int error, nsegs; 1925 1926 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1927 if (m == NULL) 1928 return (ENOBUFS); 1929 1930 m->m_len = m->m_pkthdr.len = MCLBYTES; 1931#ifdef RE_FIXUP_RX 1932 /* 1933 * This is part of an evil trick to deal with non-x86 platforms. 1934 * The RealTek chip requires RX buffers to be aligned on 64-bit 1935 * boundaries, but that will hose non-x86 machines. To get around 1936 * this, we leave some empty space at the start of each buffer 1937 * and for non-x86 hosts, we copy the buffer back six bytes 1938 * to achieve word alignment. This is slightly more efficient 1939 * than allocating a new buffer, copying the contents, and 1940 * discarding the old buffer. 1941 */ 1942 m_adj(m, RE_ETHER_ALIGN); 1943#endif 1944 error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_rx_mtag, 1945 sc->rl_ldata.rl_rx_sparemap, m, segs, &nsegs, BUS_DMA_NOWAIT); 1946 if (error != 0) { 1947 m_freem(m); 1948 return (ENOBUFS); 1949 } 1950 KASSERT(nsegs == 1, ("%s: %d segment returned!", __func__, nsegs)); 1951 1952 rxd = &sc->rl_ldata.rl_rx_desc[idx]; 1953 if (rxd->rx_m != NULL) { 1954 bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap, 1955 BUS_DMASYNC_POSTREAD); 1956 bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap); 1957 } 1958 1959 rxd->rx_m = m; 1960 map = rxd->rx_dmamap; 1961 rxd->rx_dmamap = sc->rl_ldata.rl_rx_sparemap; 1962 rxd->rx_size = segs[0].ds_len; 1963 sc->rl_ldata.rl_rx_sparemap = map; 1964 bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap, 1965 BUS_DMASYNC_PREREAD); 1966 1967 desc = &sc->rl_ldata.rl_rx_list[idx]; 1968 desc->rl_vlanctl = 0; 1969 desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[0].ds_addr)); 1970 desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[0].ds_addr)); 1971 cmdstat = segs[0].ds_len; 1972 if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1) 1973 cmdstat |= RL_RDESC_CMD_EOR; 1974 desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN); 1975 1976 return (0); 1977} 1978 1979static int 1980re_jumbo_newbuf(struct rl_softc *sc, int idx) 1981{ 1982 struct mbuf *m; 1983 struct rl_rxdesc *rxd; 1984 bus_dma_segment_t segs[1]; 1985 bus_dmamap_t map; 1986 struct rl_desc *desc; 1987 uint32_t cmdstat; 1988 int error, nsegs; 1989 1990 m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUM9BYTES); 1991 if (m == NULL) 1992 return (ENOBUFS); 1993 m->m_len = m->m_pkthdr.len = MJUM9BYTES; 1994#ifdef RE_FIXUP_RX 1995 m_adj(m, RE_ETHER_ALIGN); 1996#endif 1997 error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_jrx_mtag, 1998 sc->rl_ldata.rl_jrx_sparemap, m, segs, &nsegs, BUS_DMA_NOWAIT); 1999 if (error != 0) { 2000 m_freem(m); 2001 return (ENOBUFS); 2002 } 2003 KASSERT(nsegs == 1, ("%s: %d segment returned!", __func__, nsegs)); 2004 2005 rxd = &sc->rl_ldata.rl_jrx_desc[idx]; 2006 if (rxd->rx_m != NULL) { 2007 bus_dmamap_sync(sc->rl_ldata.rl_jrx_mtag, rxd->rx_dmamap, 2008 BUS_DMASYNC_POSTREAD); 2009 bus_dmamap_unload(sc->rl_ldata.rl_jrx_mtag, rxd->rx_dmamap); 2010 } 2011 2012 rxd->rx_m = m; 2013 map = rxd->rx_dmamap; 2014 rxd->rx_dmamap = sc->rl_ldata.rl_jrx_sparemap; 2015 rxd->rx_size = segs[0].ds_len; 2016 sc->rl_ldata.rl_jrx_sparemap = map; 2017 bus_dmamap_sync(sc->rl_ldata.rl_jrx_mtag, rxd->rx_dmamap, 2018 BUS_DMASYNC_PREREAD); 2019 2020 desc = &sc->rl_ldata.rl_rx_list[idx]; 2021 desc->rl_vlanctl = 0; 2022 desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[0].ds_addr)); 2023 desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[0].ds_addr)); 2024 cmdstat = segs[0].ds_len; 2025 if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1) 2026 cmdstat |= RL_RDESC_CMD_EOR; 2027 desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN); 2028 2029 return (0); 2030} 2031 2032#ifdef RE_FIXUP_RX 2033static __inline void 2034re_fixup_rx(struct mbuf *m) 2035{ 2036 int i; 2037 uint16_t *src, *dst; 2038 2039 src = mtod(m, uint16_t *); 2040 dst = src - (RE_ETHER_ALIGN - ETHER_ALIGN) / sizeof *src; 2041 2042 for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++) 2043 *dst++ = *src++; 2044 2045 m->m_data -= RE_ETHER_ALIGN - ETHER_ALIGN; 2046} 2047#endif 2048 2049static int 2050re_tx_list_init(struct rl_softc *sc) 2051{ 2052 struct rl_desc *desc; 2053 int i; 2054 2055 RL_LOCK_ASSERT(sc); 2056 2057 bzero(sc->rl_ldata.rl_tx_list, 2058 sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc)); 2059 for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) 2060 sc->rl_ldata.rl_tx_desc[i].tx_m = NULL; 2061#ifdef DEV_NETMAP 2062 re_netmap_tx_init(sc); 2063#endif /* DEV_NETMAP */ 2064 /* Set EOR. */ 2065 desc = &sc->rl_ldata.rl_tx_list[sc->rl_ldata.rl_tx_desc_cnt - 1]; 2066 desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOR); 2067 2068 bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag, 2069 sc->rl_ldata.rl_tx_list_map, 2070 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 2071 2072 sc->rl_ldata.rl_tx_prodidx = 0; 2073 sc->rl_ldata.rl_tx_considx = 0; 2074 sc->rl_ldata.rl_tx_free = sc->rl_ldata.rl_tx_desc_cnt; 2075 2076 return (0); 2077} 2078 2079static int 2080re_rx_list_init(struct rl_softc *sc) 2081{ 2082 int error, i; 2083 2084 bzero(sc->rl_ldata.rl_rx_list, 2085 sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc)); 2086 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 2087 sc->rl_ldata.rl_rx_desc[i].rx_m = NULL; 2088 if ((error = re_newbuf(sc, i)) != 0) 2089 return (error); 2090 } 2091#ifdef DEV_NETMAP 2092 re_netmap_rx_init(sc); 2093#endif /* DEV_NETMAP */ 2094 2095 /* Flush the RX descriptors */ 2096 2097 bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, 2098 sc->rl_ldata.rl_rx_list_map, 2099 BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); 2100 2101 sc->rl_ldata.rl_rx_prodidx = 0; 2102 sc->rl_head = sc->rl_tail = NULL; 2103 sc->rl_int_rx_act = 0; 2104 2105 return (0); 2106} 2107 2108static int 2109re_jrx_list_init(struct rl_softc *sc) 2110{ 2111 int error, i; 2112 2113 bzero(sc->rl_ldata.rl_rx_list, 2114 sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc)); 2115 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 2116 sc->rl_ldata.rl_jrx_desc[i].rx_m = NULL; 2117 if ((error = re_jumbo_newbuf(sc, i)) != 0) 2118 return (error); 2119 } 2120 2121 bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, 2122 sc->rl_ldata.rl_rx_list_map, 2123 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2124 2125 sc->rl_ldata.rl_rx_prodidx = 0; 2126 sc->rl_head = sc->rl_tail = NULL; 2127 sc->rl_int_rx_act = 0; 2128 2129 return (0); 2130} 2131 2132/* 2133 * RX handler for C+ and 8169. For the gigE chips, we support 2134 * the reception of jumbo frames that have been fragmented 2135 * across multiple 2K mbuf cluster buffers. 2136 */ 2137static int 2138re_rxeof(struct rl_softc *sc, int *rx_npktsp) 2139{ 2140 struct mbuf *m; 2141 struct ifnet *ifp; 2142 int i, rxerr, total_len; 2143 struct rl_desc *cur_rx; 2144 u_int32_t rxstat, rxvlan; 2145 int jumbo, maxpkt = 16, rx_npkts = 0; 2146 2147 RL_LOCK_ASSERT(sc); 2148 2149 ifp = sc->rl_ifp; 2150#ifdef DEV_NETMAP 2151 if (netmap_rx_irq(ifp, 0, &rx_npkts)) 2152 return 0; 2153#endif /* DEV_NETMAP */ 2154 if (ifp->if_mtu > RL_MTU && (sc->rl_flags & RL_FLAG_JUMBOV2) != 0) 2155 jumbo = 1; 2156 else 2157 jumbo = 0; 2158 2159 /* Invalidate the descriptor memory */ 2160 2161 bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, 2162 sc->rl_ldata.rl_rx_list_map, 2163 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 2164 2165 for (i = sc->rl_ldata.rl_rx_prodidx; maxpkt > 0; 2166 i = RL_RX_DESC_NXT(sc, i)) { 2167 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) 2168 break; 2169 cur_rx = &sc->rl_ldata.rl_rx_list[i]; 2170 rxstat = le32toh(cur_rx->rl_cmdstat); 2171 if ((rxstat & RL_RDESC_STAT_OWN) != 0) 2172 break; 2173 total_len = rxstat & sc->rl_rxlenmask; 2174 rxvlan = le32toh(cur_rx->rl_vlanctl); 2175 if (jumbo != 0) 2176 m = sc->rl_ldata.rl_jrx_desc[i].rx_m; 2177 else 2178 m = sc->rl_ldata.rl_rx_desc[i].rx_m; 2179 2180 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0 && 2181 (rxstat & (RL_RDESC_STAT_SOF | RL_RDESC_STAT_EOF)) != 2182 (RL_RDESC_STAT_SOF | RL_RDESC_STAT_EOF)) { 2183 /* 2184 * RTL8168C or later controllers do not 2185 * support multi-fragment packet. 2186 */ 2187 re_discard_rxbuf(sc, i); 2188 continue; 2189 } else if ((rxstat & RL_RDESC_STAT_EOF) == 0) { 2190 if (re_newbuf(sc, i) != 0) { 2191 /* 2192 * If this is part of a multi-fragment packet, 2193 * discard all the pieces. 2194 */ 2195 if (sc->rl_head != NULL) { 2196 m_freem(sc->rl_head); 2197 sc->rl_head = sc->rl_tail = NULL; 2198 } 2199 re_discard_rxbuf(sc, i); 2200 continue; 2201 } 2202 m->m_len = RE_RX_DESC_BUFLEN; 2203 if (sc->rl_head == NULL) 2204 sc->rl_head = sc->rl_tail = m; 2205 else { 2206 m->m_flags &= ~M_PKTHDR; 2207 sc->rl_tail->m_next = m; 2208 sc->rl_tail = m; 2209 } 2210 continue; 2211 } 2212 2213 /* 2214 * NOTE: for the 8139C+, the frame length field 2215 * is always 12 bits in size, but for the gigE chips, 2216 * it is 13 bits (since the max RX frame length is 16K). 2217 * Unfortunately, all 32 bits in the status word 2218 * were already used, so to make room for the extra 2219 * length bit, RealTek took out the 'frame alignment 2220 * error' bit and shifted the other status bits 2221 * over one slot. The OWN, EOR, FS and LS bits are 2222 * still in the same places. We have already extracted 2223 * the frame length and checked the OWN bit, so rather 2224 * than using an alternate bit mapping, we shift the 2225 * status bits one space to the right so we can evaluate 2226 * them using the 8169 status as though it was in the 2227 * same format as that of the 8139C+. 2228 */ 2229 if (sc->rl_type == RL_8169) 2230 rxstat >>= 1; 2231 2232 /* 2233 * if total_len > 2^13-1, both _RXERRSUM and _GIANT will be 2234 * set, but if CRC is clear, it will still be a valid frame. 2235 */ 2236 if ((rxstat & RL_RDESC_STAT_RXERRSUM) != 0) { 2237 rxerr = 1; 2238 if ((sc->rl_flags & RL_FLAG_JUMBOV2) == 0 && 2239 total_len > 8191 && 2240 (rxstat & RL_RDESC_STAT_ERRS) == RL_RDESC_STAT_GIANT) 2241 rxerr = 0; 2242 if (rxerr != 0) { 2243 ifp->if_ierrors++; 2244 /* 2245 * If this is part of a multi-fragment packet, 2246 * discard all the pieces. 2247 */ 2248 if (sc->rl_head != NULL) { 2249 m_freem(sc->rl_head); 2250 sc->rl_head = sc->rl_tail = NULL; 2251 } 2252 re_discard_rxbuf(sc, i); 2253 continue; 2254 } 2255 } 2256 2257 /* 2258 * If allocating a replacement mbuf fails, 2259 * reload the current one. 2260 */ 2261 if (jumbo != 0) 2262 rxerr = re_jumbo_newbuf(sc, i); 2263 else 2264 rxerr = re_newbuf(sc, i); 2265 if (rxerr != 0) { 2266 ifp->if_iqdrops++; 2267 if (sc->rl_head != NULL) { 2268 m_freem(sc->rl_head); 2269 sc->rl_head = sc->rl_tail = NULL; 2270 } 2271 re_discard_rxbuf(sc, i); 2272 continue; 2273 } 2274 2275 if (sc->rl_head != NULL) { 2276 if (jumbo != 0) 2277 m->m_len = total_len; 2278 else { 2279 m->m_len = total_len % RE_RX_DESC_BUFLEN; 2280 if (m->m_len == 0) 2281 m->m_len = RE_RX_DESC_BUFLEN; 2282 } 2283 /* 2284 * Special case: if there's 4 bytes or less 2285 * in this buffer, the mbuf can be discarded: 2286 * the last 4 bytes is the CRC, which we don't 2287 * care about anyway. 2288 */ 2289 if (m->m_len <= ETHER_CRC_LEN) { 2290 sc->rl_tail->m_len -= 2291 (ETHER_CRC_LEN - m->m_len); 2292 m_freem(m); 2293 } else { 2294 m->m_len -= ETHER_CRC_LEN; 2295 m->m_flags &= ~M_PKTHDR; 2296 sc->rl_tail->m_next = m; 2297 } 2298 m = sc->rl_head; 2299 sc->rl_head = sc->rl_tail = NULL; 2300 m->m_pkthdr.len = total_len - ETHER_CRC_LEN; 2301 } else 2302 m->m_pkthdr.len = m->m_len = 2303 (total_len - ETHER_CRC_LEN); 2304 2305#ifdef RE_FIXUP_RX 2306 re_fixup_rx(m); 2307#endif 2308 ifp->if_ipackets++; 2309 m->m_pkthdr.rcvif = ifp; 2310 2311 /* Do RX checksumming if enabled */ 2312 2313 if (ifp->if_capenable & IFCAP_RXCSUM) { 2314 if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) { 2315 /* Check IP header checksum */ 2316 if (rxstat & RL_RDESC_STAT_PROTOID) 2317 m->m_pkthdr.csum_flags |= 2318 CSUM_IP_CHECKED; 2319 if (!(rxstat & RL_RDESC_STAT_IPSUMBAD)) 2320 m->m_pkthdr.csum_flags |= 2321 CSUM_IP_VALID; 2322 2323 /* Check TCP/UDP checksum */ 2324 if ((RL_TCPPKT(rxstat) && 2325 !(rxstat & RL_RDESC_STAT_TCPSUMBAD)) || 2326 (RL_UDPPKT(rxstat) && 2327 !(rxstat & RL_RDESC_STAT_UDPSUMBAD))) { 2328 m->m_pkthdr.csum_flags |= 2329 CSUM_DATA_VALID|CSUM_PSEUDO_HDR; 2330 m->m_pkthdr.csum_data = 0xffff; 2331 } 2332 } else { 2333 /* 2334 * RTL8168C/RTL816CP/RTL8111C/RTL8111CP 2335 */ 2336 if ((rxstat & RL_RDESC_STAT_PROTOID) && 2337 (rxvlan & RL_RDESC_IPV4)) 2338 m->m_pkthdr.csum_flags |= 2339 CSUM_IP_CHECKED; 2340 if (!(rxstat & RL_RDESC_STAT_IPSUMBAD) && 2341 (rxvlan & RL_RDESC_IPV4)) 2342 m->m_pkthdr.csum_flags |= 2343 CSUM_IP_VALID; 2344 if (((rxstat & RL_RDESC_STAT_TCP) && 2345 !(rxstat & RL_RDESC_STAT_TCPSUMBAD)) || 2346 ((rxstat & RL_RDESC_STAT_UDP) && 2347 !(rxstat & RL_RDESC_STAT_UDPSUMBAD))) { 2348 m->m_pkthdr.csum_flags |= 2349 CSUM_DATA_VALID|CSUM_PSEUDO_HDR; 2350 m->m_pkthdr.csum_data = 0xffff; 2351 } 2352 } 2353 } 2354 maxpkt--; 2355 if (rxvlan & RL_RDESC_VLANCTL_TAG) { 2356 m->m_pkthdr.ether_vtag = 2357 bswap16((rxvlan & RL_RDESC_VLANCTL_DATA)); 2358 m->m_flags |= M_VLANTAG; 2359 } 2360 RL_UNLOCK(sc); 2361 (*ifp->if_input)(ifp, m); 2362 RL_LOCK(sc); 2363 rx_npkts++; 2364 } 2365 2366 /* Flush the RX DMA ring */ 2367 2368 bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, 2369 sc->rl_ldata.rl_rx_list_map, 2370 BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); 2371 2372 sc->rl_ldata.rl_rx_prodidx = i; 2373 2374 if (rx_npktsp != NULL) 2375 *rx_npktsp = rx_npkts; 2376 if (maxpkt) 2377 return (EAGAIN); 2378 2379 return (0); 2380} 2381 2382static void 2383re_txeof(struct rl_softc *sc) 2384{ 2385 struct ifnet *ifp; 2386 struct rl_txdesc *txd; 2387 u_int32_t txstat; 2388 int cons; 2389 2390 cons = sc->rl_ldata.rl_tx_considx; 2391 if (cons == sc->rl_ldata.rl_tx_prodidx) 2392 return; 2393 2394 ifp = sc->rl_ifp; 2395#ifdef DEV_NETMAP 2396 if (netmap_tx_irq(ifp, 0)) 2397 return; 2398#endif /* DEV_NETMAP */ 2399 /* Invalidate the TX descriptor list */ 2400 bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag, 2401 sc->rl_ldata.rl_tx_list_map, 2402 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 2403 2404 for (; cons != sc->rl_ldata.rl_tx_prodidx; 2405 cons = RL_TX_DESC_NXT(sc, cons)) { 2406 txstat = le32toh(sc->rl_ldata.rl_tx_list[cons].rl_cmdstat); 2407 if (txstat & RL_TDESC_STAT_OWN) 2408 break; 2409 /* 2410 * We only stash mbufs in the last descriptor 2411 * in a fragment chain, which also happens to 2412 * be the only place where the TX status bits 2413 * are valid. 2414 */ 2415 if (txstat & RL_TDESC_CMD_EOF) { 2416 txd = &sc->rl_ldata.rl_tx_desc[cons]; 2417 bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, 2418 txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); 2419 bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, 2420 txd->tx_dmamap); 2421 KASSERT(txd->tx_m != NULL, 2422 ("%s: freeing NULL mbufs!", __func__)); 2423 m_freem(txd->tx_m); 2424 txd->tx_m = NULL; 2425 if (txstat & (RL_TDESC_STAT_EXCESSCOL| 2426 RL_TDESC_STAT_COLCNT)) 2427 ifp->if_collisions++; 2428 if (txstat & RL_TDESC_STAT_TXERRSUM) 2429 ifp->if_oerrors++; 2430 else 2431 ifp->if_opackets++; 2432 } 2433 sc->rl_ldata.rl_tx_free++; 2434 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2435 } 2436 sc->rl_ldata.rl_tx_considx = cons; 2437 2438 /* No changes made to the TX ring, so no flush needed */ 2439 2440 if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt) { 2441#ifdef RE_TX_MODERATION 2442 /* 2443 * If not all descriptors have been reaped yet, reload 2444 * the timer so that we will eventually get another 2445 * interrupt that will cause us to re-enter this routine. 2446 * This is done in case the transmitter has gone idle. 2447 */ 2448 CSR_WRITE_4(sc, RL_TIMERCNT, 1); 2449#endif 2450 } else 2451 sc->rl_watchdog_timer = 0; 2452} 2453 2454static void 2455re_tick(void *xsc) 2456{ 2457 struct rl_softc *sc; 2458 struct mii_data *mii; 2459 2460 sc = xsc; 2461 2462 RL_LOCK_ASSERT(sc); 2463 2464 mii = device_get_softc(sc->rl_miibus); 2465 mii_tick(mii); 2466 if ((sc->rl_flags & RL_FLAG_LINK) == 0) 2467 re_miibus_statchg(sc->rl_dev); 2468 /* 2469 * Reclaim transmitted frames here. Technically it is not 2470 * necessary to do here but it ensures periodic reclamation 2471 * regardless of Tx completion interrupt which seems to be 2472 * lost on PCIe based controllers under certain situations. 2473 */ 2474 re_txeof(sc); 2475 re_watchdog(sc); 2476 callout_reset(&sc->rl_stat_callout, hz, re_tick, sc); 2477} 2478 2479#ifdef DEVICE_POLLING 2480static int 2481re_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 2482{ 2483 struct rl_softc *sc = ifp->if_softc; 2484 int rx_npkts = 0; 2485 2486 RL_LOCK(sc); 2487 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 2488 rx_npkts = re_poll_locked(ifp, cmd, count); 2489 RL_UNLOCK(sc); 2490 return (rx_npkts); 2491} 2492 2493static int 2494re_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) 2495{ 2496 struct rl_softc *sc = ifp->if_softc; 2497 int rx_npkts; 2498 2499 RL_LOCK_ASSERT(sc); 2500 2501 sc->rxcycles = count; 2502 re_rxeof(sc, &rx_npkts); 2503 re_txeof(sc); 2504 2505 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 2506 re_start_locked(ifp); 2507 2508 if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */ 2509 u_int16_t status; 2510 2511 status = CSR_READ_2(sc, RL_ISR); 2512 if (status == 0xffff) 2513 return (rx_npkts); 2514 if (status) 2515 CSR_WRITE_2(sc, RL_ISR, status); 2516 if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) && 2517 (sc->rl_flags & RL_FLAG_PCIE)) 2518 CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START); 2519 2520 /* 2521 * XXX check behaviour on receiver stalls. 2522 */ 2523 2524 if (status & RL_ISR_SYSTEM_ERR) { 2525 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2526 re_init_locked(sc); 2527 } 2528 } 2529 return (rx_npkts); 2530} 2531#endif /* DEVICE_POLLING */ 2532 2533static int 2534re_intr(void *arg) 2535{ 2536 struct rl_softc *sc; 2537 uint16_t status; 2538 2539 sc = arg; 2540 2541 status = CSR_READ_2(sc, RL_ISR); 2542 if (status == 0xFFFF || (status & RL_INTRS_CPLUS) == 0) 2543 return (FILTER_STRAY); 2544 CSR_WRITE_2(sc, RL_IMR, 0); 2545 2546 taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask); 2547 2548 return (FILTER_HANDLED); 2549} 2550 2551static void 2552re_int_task(void *arg, int npending) 2553{ 2554 struct rl_softc *sc; 2555 struct ifnet *ifp; 2556 u_int16_t status; 2557 int rval = 0; 2558 2559 sc = arg; 2560 ifp = sc->rl_ifp; 2561 2562 RL_LOCK(sc); 2563 2564 status = CSR_READ_2(sc, RL_ISR); 2565 CSR_WRITE_2(sc, RL_ISR, status); 2566 2567 if (sc->suspended || 2568 (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 2569 RL_UNLOCK(sc); 2570 return; 2571 } 2572 2573#ifdef DEVICE_POLLING 2574 if (ifp->if_capenable & IFCAP_POLLING) { 2575 RL_UNLOCK(sc); 2576 return; 2577 } 2578#endif 2579 2580 if (status & (RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_FIFO_OFLOW)) 2581 rval = re_rxeof(sc, NULL); 2582 2583 /* 2584 * Some chips will ignore a second TX request issued 2585 * while an existing transmission is in progress. If 2586 * the transmitter goes idle but there are still 2587 * packets waiting to be sent, we need to restart the 2588 * channel here to flush them out. This only seems to 2589 * be required with the PCIe devices. 2590 */ 2591 if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) && 2592 (sc->rl_flags & RL_FLAG_PCIE)) 2593 CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START); 2594 if (status & ( 2595#ifdef RE_TX_MODERATION 2596 RL_ISR_TIMEOUT_EXPIRED| 2597#else 2598 RL_ISR_TX_OK| 2599#endif 2600 RL_ISR_TX_ERR|RL_ISR_TX_DESC_UNAVAIL)) 2601 re_txeof(sc); 2602 2603 if (status & RL_ISR_SYSTEM_ERR) { 2604 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2605 re_init_locked(sc); 2606 } 2607 2608 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 2609 re_start_locked(ifp); 2610 2611 RL_UNLOCK(sc); 2612 2613 if ((CSR_READ_2(sc, RL_ISR) & RL_INTRS_CPLUS) || rval) { 2614 taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask); 2615 return; 2616 } 2617 2618 CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS); 2619} 2620 2621static void 2622re_intr_msi(void *xsc) 2623{ 2624 struct rl_softc *sc; 2625 struct ifnet *ifp; 2626 uint16_t intrs, status; 2627 2628 sc = xsc; 2629 RL_LOCK(sc); 2630 2631 ifp = sc->rl_ifp; 2632#ifdef DEVICE_POLLING 2633 if (ifp->if_capenable & IFCAP_POLLING) { 2634 RL_UNLOCK(sc); 2635 return; 2636 } 2637#endif 2638 /* Disable interrupts. */ 2639 CSR_WRITE_2(sc, RL_IMR, 0); 2640 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 2641 RL_UNLOCK(sc); 2642 return; 2643 } 2644 2645 intrs = RL_INTRS_CPLUS; 2646 status = CSR_READ_2(sc, RL_ISR); 2647 CSR_WRITE_2(sc, RL_ISR, status); 2648 if (sc->rl_int_rx_act > 0) { 2649 intrs &= ~(RL_ISR_RX_OK | RL_ISR_RX_ERR | RL_ISR_FIFO_OFLOW | 2650 RL_ISR_RX_OVERRUN); 2651 status &= ~(RL_ISR_RX_OK | RL_ISR_RX_ERR | RL_ISR_FIFO_OFLOW | 2652 RL_ISR_RX_OVERRUN); 2653 } 2654 2655 if (status & (RL_ISR_TIMEOUT_EXPIRED | RL_ISR_RX_OK | RL_ISR_RX_ERR | 2656 RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN)) { 2657 re_rxeof(sc, NULL); 2658 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { 2659 if (sc->rl_int_rx_mod != 0 && 2660 (status & (RL_ISR_RX_OK | RL_ISR_RX_ERR | 2661 RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN)) != 0) { 2662 /* Rearm one-shot timer. */ 2663 CSR_WRITE_4(sc, RL_TIMERCNT, 1); 2664 intrs &= ~(RL_ISR_RX_OK | RL_ISR_RX_ERR | 2665 RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN); 2666 sc->rl_int_rx_act = 1; 2667 } else { 2668 intrs |= RL_ISR_RX_OK | RL_ISR_RX_ERR | 2669 RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN; 2670 sc->rl_int_rx_act = 0; 2671 } 2672 } 2673 } 2674 2675 /* 2676 * Some chips will ignore a second TX request issued 2677 * while an existing transmission is in progress. If 2678 * the transmitter goes idle but there are still 2679 * packets waiting to be sent, we need to restart the 2680 * channel here to flush them out. This only seems to 2681 * be required with the PCIe devices. 2682 */ 2683 if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) && 2684 (sc->rl_flags & RL_FLAG_PCIE)) 2685 CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START); 2686 if (status & (RL_ISR_TX_OK | RL_ISR_TX_ERR | RL_ISR_TX_DESC_UNAVAIL)) 2687 re_txeof(sc); 2688 2689 if (status & RL_ISR_SYSTEM_ERR) { 2690 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2691 re_init_locked(sc); 2692 } 2693 2694 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { 2695 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 2696 re_start_locked(ifp); 2697 CSR_WRITE_2(sc, RL_IMR, intrs); 2698 } 2699 RL_UNLOCK(sc); 2700} 2701 2702static int 2703re_encap(struct rl_softc *sc, struct mbuf **m_head) 2704{ 2705 struct rl_txdesc *txd, *txd_last; 2706 bus_dma_segment_t segs[RL_NTXSEGS]; 2707 bus_dmamap_t map; 2708 struct mbuf *m_new; 2709 struct rl_desc *desc; 2710 int nsegs, prod; 2711 int i, error, ei, si; 2712 int padlen; 2713 uint32_t cmdstat, csum_flags, vlanctl; 2714 2715 RL_LOCK_ASSERT(sc); 2716 M_ASSERTPKTHDR((*m_head)); 2717 2718 /* 2719 * With some of the RealTek chips, using the checksum offload 2720 * support in conjunction with the autopadding feature results 2721 * in the transmission of corrupt frames. For example, if we 2722 * need to send a really small IP fragment that's less than 60 2723 * bytes in size, and IP header checksumming is enabled, the 2724 * resulting ethernet frame that appears on the wire will 2725 * have garbled payload. To work around this, if TX IP checksum 2726 * offload is enabled, we always manually pad short frames out 2727 * to the minimum ethernet frame size. 2728 */ 2729 if ((sc->rl_flags & RL_FLAG_AUTOPAD) == 0 && 2730 (*m_head)->m_pkthdr.len < RL_IP4CSUMTX_PADLEN && 2731 ((*m_head)->m_pkthdr.csum_flags & CSUM_IP) != 0) { 2732 padlen = RL_MIN_FRAMELEN - (*m_head)->m_pkthdr.len; 2733 if (M_WRITABLE(*m_head) == 0) { 2734 /* Get a writable copy. */ 2735 m_new = m_dup(*m_head, M_NOWAIT); 2736 m_freem(*m_head); 2737 if (m_new == NULL) { 2738 *m_head = NULL; 2739 return (ENOBUFS); 2740 } 2741 *m_head = m_new; 2742 } 2743 if ((*m_head)->m_next != NULL || 2744 M_TRAILINGSPACE(*m_head) < padlen) { 2745 m_new = m_defrag(*m_head, M_NOWAIT); 2746 if (m_new == NULL) { 2747 m_freem(*m_head); 2748 *m_head = NULL; 2749 return (ENOBUFS); 2750 } 2751 } else 2752 m_new = *m_head; 2753 2754 /* 2755 * Manually pad short frames, and zero the pad space 2756 * to avoid leaking data. 2757 */ 2758 bzero(mtod(m_new, char *) + m_new->m_pkthdr.len, padlen); 2759 m_new->m_pkthdr.len += padlen; 2760 m_new->m_len = m_new->m_pkthdr.len; 2761 *m_head = m_new; 2762 } 2763 2764 prod = sc->rl_ldata.rl_tx_prodidx; 2765 txd = &sc->rl_ldata.rl_tx_desc[prod]; 2766 error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap, 2767 *m_head, segs, &nsegs, BUS_DMA_NOWAIT); 2768 if (error == EFBIG) { 2769 m_new = m_collapse(*m_head, M_NOWAIT, RL_NTXSEGS); 2770 if (m_new == NULL) { 2771 m_freem(*m_head); 2772 *m_head = NULL; 2773 return (ENOBUFS); 2774 } 2775 *m_head = m_new; 2776 error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag, 2777 txd->tx_dmamap, *m_head, segs, &nsegs, BUS_DMA_NOWAIT); 2778 if (error != 0) { 2779 m_freem(*m_head); 2780 *m_head = NULL; 2781 return (error); 2782 } 2783 } else if (error != 0) 2784 return (error); 2785 if (nsegs == 0) { 2786 m_freem(*m_head); 2787 *m_head = NULL; 2788 return (EIO); 2789 } 2790 2791 /* Check for number of available descriptors. */ 2792 if (sc->rl_ldata.rl_tx_free - nsegs <= 1) { 2793 bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap); 2794 return (ENOBUFS); 2795 } 2796 2797 bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap, 2798 BUS_DMASYNC_PREWRITE); 2799 2800 /* 2801 * Set up checksum offload. Note: checksum offload bits must 2802 * appear in all descriptors of a multi-descriptor transmit 2803 * attempt. This is according to testing done with an 8169 2804 * chip. This is a requirement. 2805 */ 2806 vlanctl = 0; 2807 csum_flags = 0; 2808 if (((*m_head)->m_pkthdr.csum_flags & CSUM_TSO) != 0) { 2809 if ((sc->rl_flags & RL_FLAG_DESCV2) != 0) { 2810 csum_flags |= RL_TDESC_CMD_LGSEND; 2811 vlanctl |= ((uint32_t)(*m_head)->m_pkthdr.tso_segsz << 2812 RL_TDESC_CMD_MSSVALV2_SHIFT); 2813 } else { 2814 csum_flags |= RL_TDESC_CMD_LGSEND | 2815 ((uint32_t)(*m_head)->m_pkthdr.tso_segsz << 2816 RL_TDESC_CMD_MSSVAL_SHIFT); 2817 } 2818 } else { 2819 /* 2820 * Unconditionally enable IP checksum if TCP or UDP 2821 * checksum is required. Otherwise, TCP/UDP checksum 2822 * does't make effects. 2823 */ 2824 if (((*m_head)->m_pkthdr.csum_flags & RE_CSUM_FEATURES) != 0) { 2825 if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) { 2826 csum_flags |= RL_TDESC_CMD_IPCSUM; 2827 if (((*m_head)->m_pkthdr.csum_flags & 2828 CSUM_TCP) != 0) 2829 csum_flags |= RL_TDESC_CMD_TCPCSUM; 2830 if (((*m_head)->m_pkthdr.csum_flags & 2831 CSUM_UDP) != 0) 2832 csum_flags |= RL_TDESC_CMD_UDPCSUM; 2833 } else { 2834 vlanctl |= RL_TDESC_CMD_IPCSUMV2; 2835 if (((*m_head)->m_pkthdr.csum_flags & 2836 CSUM_TCP) != 0) 2837 vlanctl |= RL_TDESC_CMD_TCPCSUMV2; 2838 if (((*m_head)->m_pkthdr.csum_flags & 2839 CSUM_UDP) != 0) 2840 vlanctl |= RL_TDESC_CMD_UDPCSUMV2; 2841 } 2842 } 2843 } 2844 2845 /* 2846 * Set up hardware VLAN tagging. Note: vlan tag info must 2847 * appear in all descriptors of a multi-descriptor 2848 * transmission attempt. 2849 */ 2850 if ((*m_head)->m_flags & M_VLANTAG) 2851 vlanctl |= bswap16((*m_head)->m_pkthdr.ether_vtag) | 2852 RL_TDESC_VLANCTL_TAG; 2853 2854 si = prod; 2855 for (i = 0; i < nsegs; i++, prod = RL_TX_DESC_NXT(sc, prod)) { 2856 desc = &sc->rl_ldata.rl_tx_list[prod]; 2857 desc->rl_vlanctl = htole32(vlanctl); 2858 desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[i].ds_addr)); 2859 desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[i].ds_addr)); 2860 cmdstat = segs[i].ds_len; 2861 if (i != 0) 2862 cmdstat |= RL_TDESC_CMD_OWN; 2863 if (prod == sc->rl_ldata.rl_tx_desc_cnt - 1) 2864 cmdstat |= RL_TDESC_CMD_EOR; 2865 desc->rl_cmdstat = htole32(cmdstat | csum_flags); 2866 sc->rl_ldata.rl_tx_free--; 2867 } 2868 /* Update producer index. */ 2869 sc->rl_ldata.rl_tx_prodidx = prod; 2870 2871 /* Set EOF on the last descriptor. */ 2872 ei = RL_TX_DESC_PRV(sc, prod); 2873 desc = &sc->rl_ldata.rl_tx_list[ei]; 2874 desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOF); 2875 2876 desc = &sc->rl_ldata.rl_tx_list[si]; 2877 /* Set SOF and transfer ownership of packet to the chip. */ 2878 desc->rl_cmdstat |= htole32(RL_TDESC_CMD_OWN | RL_TDESC_CMD_SOF); 2879 2880 /* 2881 * Insure that the map for this transmission 2882 * is placed at the array index of the last descriptor 2883 * in this chain. (Swap last and first dmamaps.) 2884 */ 2885 txd_last = &sc->rl_ldata.rl_tx_desc[ei]; 2886 map = txd->tx_dmamap; 2887 txd->tx_dmamap = txd_last->tx_dmamap; 2888 txd_last->tx_dmamap = map; 2889 txd_last->tx_m = *m_head; 2890 2891 return (0); 2892} 2893 2894static void 2895re_start(struct ifnet *ifp) 2896{ 2897 struct rl_softc *sc; 2898 2899 sc = ifp->if_softc; 2900 RL_LOCK(sc); 2901 re_start_locked(ifp); 2902 RL_UNLOCK(sc); 2903} 2904 2905/* 2906 * Main transmit routine for C+ and gigE NICs. 2907 */ 2908static void 2909re_start_locked(struct ifnet *ifp) 2910{ 2911 struct rl_softc *sc; 2912 struct mbuf *m_head; 2913 int queued; 2914 2915 sc = ifp->if_softc; 2916 2917#ifdef DEV_NETMAP 2918 /* XXX is this necessary ? */ 2919 if (ifp->if_capenable & IFCAP_NETMAP) { 2920 struct netmap_kring *kring = &NA(ifp)->tx_rings[0]; 2921 if (sc->rl_ldata.rl_tx_prodidx != kring->nr_hwcur) { 2922 /* kick the tx unit */ 2923 CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START); 2924#ifdef RE_TX_MODERATION 2925 CSR_WRITE_4(sc, RL_TIMERCNT, 1); 2926#endif 2927 sc->rl_watchdog_timer = 5; 2928 } 2929 return; 2930 } 2931#endif /* DEV_NETMAP */ 2932 if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 2933 IFF_DRV_RUNNING || (sc->rl_flags & RL_FLAG_LINK) == 0) 2934 return; 2935 2936 for (queued = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) && 2937 sc->rl_ldata.rl_tx_free > 1;) { 2938 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 2939 if (m_head == NULL) 2940 break; 2941 2942 if (re_encap(sc, &m_head) != 0) { 2943 if (m_head == NULL) 2944 break; 2945 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 2946 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2947 break; 2948 } 2949 2950 /* 2951 * If there's a BPF listener, bounce a copy of this frame 2952 * to him. 2953 */ 2954 ETHER_BPF_MTAP(ifp, m_head); 2955 2956 queued++; 2957 } 2958 2959 if (queued == 0) { 2960#ifdef RE_TX_MODERATION 2961 if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt) 2962 CSR_WRITE_4(sc, RL_TIMERCNT, 1); 2963#endif 2964 return; 2965 } 2966 2967 /* Flush the TX descriptors */ 2968 2969 bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag, 2970 sc->rl_ldata.rl_tx_list_map, 2971 BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); 2972 2973 CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START); 2974 2975#ifdef RE_TX_MODERATION 2976 /* 2977 * Use the countdown timer for interrupt moderation. 2978 * 'TX done' interrupts are disabled. Instead, we reset the 2979 * countdown timer, which will begin counting until it hits 2980 * the value in the TIMERINT register, and then trigger an 2981 * interrupt. Each time we write to the TIMERCNT register, 2982 * the timer count is reset to 0. 2983 */ 2984 CSR_WRITE_4(sc, RL_TIMERCNT, 1); 2985#endif 2986 2987 /* 2988 * Set a timeout in case the chip goes out to lunch. 2989 */ 2990 sc->rl_watchdog_timer = 5; 2991} 2992 2993static void 2994re_set_jumbo(struct rl_softc *sc, int jumbo) 2995{ 2996 2997 if (sc->rl_hwrev->rl_rev == RL_HWREV_8168E_VL) { 2998 pci_set_max_read_req(sc->rl_dev, 4096); 2999 return; 3000 } 3001 3002 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); 3003 if (jumbo != 0) { 3004 CSR_WRITE_1(sc, sc->rl_cfg3, CSR_READ_1(sc, sc->rl_cfg3) | 3005 RL_CFG3_JUMBO_EN0); 3006 switch (sc->rl_hwrev->rl_rev) { 3007 case RL_HWREV_8168DP: 3008 break; 3009 case RL_HWREV_8168E: 3010 CSR_WRITE_1(sc, sc->rl_cfg4, 3011 CSR_READ_1(sc, sc->rl_cfg4) | 0x01); 3012 break; 3013 default: 3014 CSR_WRITE_1(sc, sc->rl_cfg4, 3015 CSR_READ_1(sc, sc->rl_cfg4) | RL_CFG4_JUMBO_EN1); 3016 } 3017 } else { 3018 CSR_WRITE_1(sc, sc->rl_cfg3, CSR_READ_1(sc, sc->rl_cfg3) & 3019 ~RL_CFG3_JUMBO_EN0); 3020 switch (sc->rl_hwrev->rl_rev) { 3021 case RL_HWREV_8168DP: 3022 break; 3023 case RL_HWREV_8168E: 3024 CSR_WRITE_1(sc, sc->rl_cfg4, 3025 CSR_READ_1(sc, sc->rl_cfg4) & ~0x01); 3026 break; 3027 default: 3028 CSR_WRITE_1(sc, sc->rl_cfg4, 3029 CSR_READ_1(sc, sc->rl_cfg4) & ~RL_CFG4_JUMBO_EN1); 3030 } 3031 } 3032 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 3033 3034 switch (sc->rl_hwrev->rl_rev) { 3035 case RL_HWREV_8168DP: 3036 pci_set_max_read_req(sc->rl_dev, 4096); 3037 break; 3038 default: 3039 if (jumbo != 0) 3040 pci_set_max_read_req(sc->rl_dev, 512); 3041 else 3042 pci_set_max_read_req(sc->rl_dev, 4096); 3043 } 3044} 3045 3046static void 3047re_init(void *xsc) 3048{ 3049 struct rl_softc *sc = xsc; 3050 3051 RL_LOCK(sc); 3052 re_init_locked(sc); 3053 RL_UNLOCK(sc); 3054} 3055 3056static void 3057re_init_locked(struct rl_softc *sc) 3058{ 3059 struct ifnet *ifp = sc->rl_ifp; 3060 struct mii_data *mii; 3061 uint32_t reg; 3062 uint16_t cfg; 3063 union { 3064 uint32_t align_dummy; 3065 u_char eaddr[ETHER_ADDR_LEN]; 3066 } eaddr; 3067 3068 RL_LOCK_ASSERT(sc); 3069 3070 mii = device_get_softc(sc->rl_miibus); 3071 3072 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) 3073 return; 3074 3075 /* 3076 * Cancel pending I/O and free all RX/TX buffers. 3077 */ 3078 re_stop(sc); 3079 3080 /* Put controller into known state. */ 3081 re_reset(sc); 3082 3083 /* 3084 * For C+ mode, initialize the RX descriptors and mbufs. 3085 */ 3086 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) { 3087 if (ifp->if_mtu > RL_MTU) { 3088 if (re_jrx_list_init(sc) != 0) { 3089 device_printf(sc->rl_dev, 3090 "no memory for jumbo RX buffers\n"); 3091 re_stop(sc); 3092 return; 3093 } 3094 /* Disable checksum offloading for jumbo frames. */ 3095 ifp->if_capenable &= ~(IFCAP_HWCSUM | IFCAP_TSO4); 3096 ifp->if_hwassist &= ~(RE_CSUM_FEATURES | CSUM_TSO); 3097 } else { 3098 if (re_rx_list_init(sc) != 0) { 3099 device_printf(sc->rl_dev, 3100 "no memory for RX buffers\n"); 3101 re_stop(sc); 3102 return; 3103 } 3104 } 3105 re_set_jumbo(sc, ifp->if_mtu > RL_MTU); 3106 } else { 3107 if (re_rx_list_init(sc) != 0) { 3108 device_printf(sc->rl_dev, "no memory for RX buffers\n"); 3109 re_stop(sc); 3110 return; 3111 } 3112 if ((sc->rl_flags & RL_FLAG_PCIE) != 0 && 3113 pci_get_device(sc->rl_dev) != RT_DEVICEID_8101E) { 3114 if (ifp->if_mtu > RL_MTU) 3115 pci_set_max_read_req(sc->rl_dev, 512); 3116 else 3117 pci_set_max_read_req(sc->rl_dev, 4096); 3118 } 3119 } 3120 re_tx_list_init(sc); 3121 3122 /* 3123 * Enable C+ RX and TX mode, as well as VLAN stripping and 3124 * RX checksum offload. We must configure the C+ register 3125 * before all others. 3126 */ 3127 cfg = RL_CPLUSCMD_PCI_MRW; 3128 if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) 3129 cfg |= RL_CPLUSCMD_RXCSUM_ENB; 3130 if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) 3131 cfg |= RL_CPLUSCMD_VLANSTRIP; 3132 if ((sc->rl_flags & RL_FLAG_MACSTAT) != 0) { 3133 cfg |= RL_CPLUSCMD_MACSTAT_DIS; 3134 /* XXX magic. */ 3135 cfg |= 0x0001; 3136 } else 3137 cfg |= RL_CPLUSCMD_RXENB | RL_CPLUSCMD_TXENB; 3138 CSR_WRITE_2(sc, RL_CPLUS_CMD, cfg); 3139 if (sc->rl_hwrev->rl_rev == RL_HWREV_8169_8110SC || 3140 sc->rl_hwrev->rl_rev == RL_HWREV_8169_8110SCE) { 3141 reg = 0x000fff00; 3142 if ((CSR_READ_1(sc, sc->rl_cfg2) & RL_CFG2_PCI66MHZ) != 0) 3143 reg |= 0x000000ff; 3144 if (sc->rl_hwrev->rl_rev == RL_HWREV_8169_8110SCE) 3145 reg |= 0x00f00000; 3146 CSR_WRITE_4(sc, 0x7c, reg); 3147 /* Disable interrupt mitigation. */ 3148 CSR_WRITE_2(sc, 0xe2, 0); 3149 } 3150 /* 3151 * Disable TSO if interface MTU size is greater than MSS 3152 * allowed in controller. 3153 */ 3154 if (ifp->if_mtu > RL_TSO_MTU && (ifp->if_capenable & IFCAP_TSO4) != 0) { 3155 ifp->if_capenable &= ~IFCAP_TSO4; 3156 ifp->if_hwassist &= ~CSUM_TSO; 3157 } 3158 3159 /* 3160 * Init our MAC address. Even though the chipset 3161 * documentation doesn't mention it, we need to enter "Config 3162 * register write enable" mode to modify the ID registers. 3163 */ 3164 /* Copy MAC address on stack to align. */ 3165 bcopy(IF_LLADDR(ifp), eaddr.eaddr, ETHER_ADDR_LEN); 3166 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); 3167 CSR_WRITE_4(sc, RL_IDR0, 3168 htole32(*(u_int32_t *)(&eaddr.eaddr[0]))); 3169 CSR_WRITE_4(sc, RL_IDR4, 3170 htole32(*(u_int32_t *)(&eaddr.eaddr[4]))); 3171 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 3172 3173 /* 3174 * Load the addresses of the RX and TX lists into the chip. 3175 */ 3176 3177 CSR_WRITE_4(sc, RL_RXLIST_ADDR_HI, 3178 RL_ADDR_HI(sc->rl_ldata.rl_rx_list_addr)); 3179 CSR_WRITE_4(sc, RL_RXLIST_ADDR_LO, 3180 RL_ADDR_LO(sc->rl_ldata.rl_rx_list_addr)); 3181 3182 CSR_WRITE_4(sc, RL_TXLIST_ADDR_HI, 3183 RL_ADDR_HI(sc->rl_ldata.rl_tx_list_addr)); 3184 CSR_WRITE_4(sc, RL_TXLIST_ADDR_LO, 3185 RL_ADDR_LO(sc->rl_ldata.rl_tx_list_addr)); 3186 3187 if ((sc->rl_flags & RL_FLAG_RXDV_GATED) != 0) 3188 CSR_WRITE_4(sc, RL_MISC, CSR_READ_4(sc, RL_MISC) & 3189 ~0x00080000); 3190 3191 /* 3192 * Enable transmit and receive. 3193 */ 3194 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 3195 3196 /* 3197 * Set the initial TX configuration. 3198 */ 3199 if (sc->rl_testmode) { 3200 if (sc->rl_type == RL_8169) 3201 CSR_WRITE_4(sc, RL_TXCFG, 3202 RL_TXCFG_CONFIG|RL_LOOPTEST_ON); 3203 else 3204 CSR_WRITE_4(sc, RL_TXCFG, 3205 RL_TXCFG_CONFIG|RL_LOOPTEST_ON_CPLUS); 3206 } else 3207 CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); 3208 3209 CSR_WRITE_1(sc, RL_EARLY_TX_THRESH, 16); 3210 3211 /* 3212 * Set the initial RX configuration. 3213 */ 3214 re_set_rxmode(sc); 3215 3216 /* Configure interrupt moderation. */ 3217 if (sc->rl_type == RL_8169) { 3218 /* Magic from vendor. */ 3219 CSR_WRITE_2(sc, RL_INTRMOD, 0x5100); 3220 } 3221 3222#ifdef DEVICE_POLLING 3223 /* 3224 * Disable interrupts if we are polling. 3225 */ 3226 if (ifp->if_capenable & IFCAP_POLLING) 3227 CSR_WRITE_2(sc, RL_IMR, 0); 3228 else /* otherwise ... */ 3229#endif 3230 3231 /* 3232 * Enable interrupts. 3233 */ 3234 if (sc->rl_testmode) 3235 CSR_WRITE_2(sc, RL_IMR, 0); 3236 else 3237 CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS); 3238 CSR_WRITE_2(sc, RL_ISR, RL_INTRS_CPLUS); 3239 3240 /* Set initial TX threshold */ 3241 sc->rl_txthresh = RL_TX_THRESH_INIT; 3242 3243 /* Start RX/TX process. */ 3244 CSR_WRITE_4(sc, RL_MISSEDPKT, 0); 3245#ifdef notdef 3246 /* Enable receiver and transmitter. */ 3247 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); 3248#endif 3249 3250 /* 3251 * Initialize the timer interrupt register so that 3252 * a timer interrupt will be generated once the timer 3253 * reaches a certain number of ticks. The timer is 3254 * reloaded on each transmit. 3255 */ 3256#ifdef RE_TX_MODERATION 3257 /* 3258 * Use timer interrupt register to moderate TX interrupt 3259 * moderation, which dramatically improves TX frame rate. 3260 */ 3261 if (sc->rl_type == RL_8169) 3262 CSR_WRITE_4(sc, RL_TIMERINT_8169, 0x800); 3263 else 3264 CSR_WRITE_4(sc, RL_TIMERINT, 0x400); 3265#else 3266 /* 3267 * Use timer interrupt register to moderate RX interrupt 3268 * moderation. 3269 */ 3270 if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) != 0 && 3271 intr_filter == 0) { 3272 if (sc->rl_type == RL_8169) 3273 CSR_WRITE_4(sc, RL_TIMERINT_8169, 3274 RL_USECS(sc->rl_int_rx_mod)); 3275 } else { 3276 if (sc->rl_type == RL_8169) 3277 CSR_WRITE_4(sc, RL_TIMERINT_8169, RL_USECS(0)); 3278 } 3279#endif 3280 3281 /* 3282 * For 8169 gigE NICs, set the max allowed RX packet 3283 * size so we can receive jumbo frames. 3284 */ 3285 if (sc->rl_type == RL_8169) { 3286 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) { 3287 /* 3288 * For controllers that use new jumbo frame scheme, 3289 * set maximum size of jumbo frame depedning on 3290 * controller revisions. 3291 */ 3292 if (ifp->if_mtu > RL_MTU) 3293 CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 3294 sc->rl_hwrev->rl_max_mtu + 3295 ETHER_VLAN_ENCAP_LEN + ETHER_HDR_LEN + 3296 ETHER_CRC_LEN); 3297 else 3298 CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 3299 RE_RX_DESC_BUFLEN); 3300 } else if ((sc->rl_flags & RL_FLAG_PCIE) != 0 && 3301 sc->rl_hwrev->rl_max_mtu == RL_MTU) { 3302 /* RTL810x has no jumbo frame support. */ 3303 CSR_WRITE_2(sc, RL_MAXRXPKTLEN, RE_RX_DESC_BUFLEN); 3304 } else 3305 CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 16383); 3306 } 3307 3308 if (sc->rl_testmode) 3309 return; 3310 3311 CSR_WRITE_1(sc, sc->rl_cfg1, CSR_READ_1(sc, sc->rl_cfg1) | 3312 RL_CFG1_DRVLOAD); 3313 3314 ifp->if_drv_flags |= IFF_DRV_RUNNING; 3315 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 3316 3317 sc->rl_flags &= ~RL_FLAG_LINK; 3318 mii_mediachg(mii); 3319 3320 sc->rl_watchdog_timer = 0; 3321 callout_reset(&sc->rl_stat_callout, hz, re_tick, sc); 3322} 3323 3324/* 3325 * Set media options. 3326 */ 3327static int 3328re_ifmedia_upd(struct ifnet *ifp) 3329{ 3330 struct rl_softc *sc; 3331 struct mii_data *mii; 3332 int error; 3333 3334 sc = ifp->if_softc; 3335 mii = device_get_softc(sc->rl_miibus); 3336 RL_LOCK(sc); 3337 error = mii_mediachg(mii); 3338 RL_UNLOCK(sc); 3339 3340 return (error); 3341} 3342 3343/* 3344 * Report current media status. 3345 */ 3346static void 3347re_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 3348{ 3349 struct rl_softc *sc; 3350 struct mii_data *mii; 3351 3352 sc = ifp->if_softc; 3353 mii = device_get_softc(sc->rl_miibus); 3354 3355 RL_LOCK(sc); 3356 mii_pollstat(mii); 3357 ifmr->ifm_active = mii->mii_media_active; 3358 ifmr->ifm_status = mii->mii_media_status; 3359 RL_UNLOCK(sc); 3360} 3361 3362static int 3363re_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 3364{ 3365 struct rl_softc *sc = ifp->if_softc; 3366 struct ifreq *ifr = (struct ifreq *) data; 3367 struct mii_data *mii; 3368 int error = 0; 3369 3370 switch (command) { 3371 case SIOCSIFMTU: 3372 if (ifr->ifr_mtu < ETHERMIN || 3373 ifr->ifr_mtu > sc->rl_hwrev->rl_max_mtu || 3374 ((sc->rl_flags & RL_FLAG_FASTETHER) != 0 && 3375 ifr->ifr_mtu > RL_MTU)) { 3376 error = EINVAL; 3377 break; 3378 } 3379 RL_LOCK(sc); 3380 if (ifp->if_mtu != ifr->ifr_mtu) { 3381 ifp->if_mtu = ifr->ifr_mtu; 3382 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0 && 3383 (ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { 3384 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 3385 re_init_locked(sc); 3386 } 3387 if (ifp->if_mtu > RL_TSO_MTU && 3388 (ifp->if_capenable & IFCAP_TSO4) != 0) { 3389 ifp->if_capenable &= ~(IFCAP_TSO4 | 3390 IFCAP_VLAN_HWTSO); 3391 ifp->if_hwassist &= ~CSUM_TSO; 3392 } 3393 VLAN_CAPABILITIES(ifp); 3394 } 3395 RL_UNLOCK(sc); 3396 break; 3397 case SIOCSIFFLAGS: 3398 RL_LOCK(sc); 3399 if ((ifp->if_flags & IFF_UP) != 0) { 3400 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { 3401 if (((ifp->if_flags ^ sc->rl_if_flags) 3402 & (IFF_PROMISC | IFF_ALLMULTI)) != 0) 3403 re_set_rxmode(sc); 3404 } else 3405 re_init_locked(sc); 3406 } else { 3407 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) 3408 re_stop(sc); 3409 } 3410 sc->rl_if_flags = ifp->if_flags; 3411 RL_UNLOCK(sc); 3412 break; 3413 case SIOCADDMULTI: 3414 case SIOCDELMULTI: 3415 RL_LOCK(sc); 3416 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) 3417 re_set_rxmode(sc); 3418 RL_UNLOCK(sc); 3419 break; 3420 case SIOCGIFMEDIA: 3421 case SIOCSIFMEDIA: 3422 mii = device_get_softc(sc->rl_miibus); 3423 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); 3424 break; 3425 case SIOCSIFCAP: 3426 { 3427 int mask, reinit; 3428 3429 mask = ifr->ifr_reqcap ^ ifp->if_capenable; 3430 reinit = 0; 3431#ifdef DEVICE_POLLING 3432 if (mask & IFCAP_POLLING) { 3433 if (ifr->ifr_reqcap & IFCAP_POLLING) { 3434 error = ether_poll_register(re_poll, ifp); 3435 if (error) 3436 return (error); 3437 RL_LOCK(sc); 3438 /* Disable interrupts */ 3439 CSR_WRITE_2(sc, RL_IMR, 0x0000); 3440 ifp->if_capenable |= IFCAP_POLLING; 3441 RL_UNLOCK(sc); 3442 } else { 3443 error = ether_poll_deregister(ifp); 3444 /* Enable interrupts. */ 3445 RL_LOCK(sc); 3446 CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS); 3447 ifp->if_capenable &= ~IFCAP_POLLING; 3448 RL_UNLOCK(sc); 3449 } 3450 } 3451#endif /* DEVICE_POLLING */ 3452 RL_LOCK(sc); 3453 if ((mask & IFCAP_TXCSUM) != 0 && 3454 (ifp->if_capabilities & IFCAP_TXCSUM) != 0) { 3455 ifp->if_capenable ^= IFCAP_TXCSUM; 3456 if ((ifp->if_capenable & IFCAP_TXCSUM) != 0) 3457 ifp->if_hwassist |= RE_CSUM_FEATURES; 3458 else 3459 ifp->if_hwassist &= ~RE_CSUM_FEATURES; 3460 reinit = 1; 3461 } 3462 if ((mask & IFCAP_RXCSUM) != 0 && 3463 (ifp->if_capabilities & IFCAP_RXCSUM) != 0) { 3464 ifp->if_capenable ^= IFCAP_RXCSUM; 3465 reinit = 1; 3466 } 3467 if ((mask & IFCAP_TSO4) != 0 && 3468 (ifp->if_capabilities & IFCAP_TSO4) != 0) { 3469 ifp->if_capenable ^= IFCAP_TSO4; 3470 if ((IFCAP_TSO4 & ifp->if_capenable) != 0) 3471 ifp->if_hwassist |= CSUM_TSO; 3472 else 3473 ifp->if_hwassist &= ~CSUM_TSO; 3474 if (ifp->if_mtu > RL_TSO_MTU && 3475 (ifp->if_capenable & IFCAP_TSO4) != 0) { 3476 ifp->if_capenable &= ~IFCAP_TSO4; 3477 ifp->if_hwassist &= ~CSUM_TSO; 3478 } 3479 } 3480 if ((mask & IFCAP_VLAN_HWTSO) != 0 && 3481 (ifp->if_capabilities & IFCAP_VLAN_HWTSO) != 0) 3482 ifp->if_capenable ^= IFCAP_VLAN_HWTSO; 3483 if ((mask & IFCAP_VLAN_HWTAGGING) != 0 && 3484 (ifp->if_capabilities & IFCAP_VLAN_HWTAGGING) != 0) { 3485 ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; 3486 /* TSO over VLAN requires VLAN hardware tagging. */ 3487 if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) == 0) 3488 ifp->if_capenable &= ~IFCAP_VLAN_HWTSO; 3489 reinit = 1; 3490 } 3491 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0 && 3492 (mask & (IFCAP_HWCSUM | IFCAP_TSO4 | 3493 IFCAP_VLAN_HWTSO)) != 0) 3494 reinit = 1; 3495 if ((mask & IFCAP_WOL) != 0 && 3496 (ifp->if_capabilities & IFCAP_WOL) != 0) { 3497 if ((mask & IFCAP_WOL_UCAST) != 0) 3498 ifp->if_capenable ^= IFCAP_WOL_UCAST; 3499 if ((mask & IFCAP_WOL_MCAST) != 0) 3500 ifp->if_capenable ^= IFCAP_WOL_MCAST; 3501 if ((mask & IFCAP_WOL_MAGIC) != 0) 3502 ifp->if_capenable ^= IFCAP_WOL_MAGIC; 3503 } 3504 if (reinit && ifp->if_drv_flags & IFF_DRV_RUNNING) { 3505 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 3506 re_init_locked(sc); 3507 } 3508 RL_UNLOCK(sc); 3509 VLAN_CAPABILITIES(ifp); 3510 } 3511 break; 3512 default: 3513 error = ether_ioctl(ifp, command, data); 3514 break; 3515 } 3516 3517 return (error); 3518} 3519 3520static void 3521re_watchdog(struct rl_softc *sc) 3522{ 3523 struct ifnet *ifp; 3524 3525 RL_LOCK_ASSERT(sc); 3526 3527 if (sc->rl_watchdog_timer == 0 || --sc->rl_watchdog_timer != 0) 3528 return; 3529 3530 ifp = sc->rl_ifp; 3531 re_txeof(sc); 3532 if (sc->rl_ldata.rl_tx_free == sc->rl_ldata.rl_tx_desc_cnt) { 3533 if_printf(ifp, "watchdog timeout (missed Tx interrupts) " 3534 "-- recovering\n"); 3535 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3536 re_start_locked(ifp); 3537 return; 3538 } 3539 3540 if_printf(ifp, "watchdog timeout\n"); 3541 ifp->if_oerrors++; 3542 3543 re_rxeof(sc, NULL); 3544 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 3545 re_init_locked(sc); 3546 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) 3547 re_start_locked(ifp); 3548} 3549 3550/* 3551 * Stop the adapter and free any mbufs allocated to the 3552 * RX and TX lists. 3553 */ 3554static void 3555re_stop(struct rl_softc *sc) 3556{ 3557 int i; 3558 struct ifnet *ifp; 3559 struct rl_txdesc *txd; 3560 struct rl_rxdesc *rxd; 3561 3562 RL_LOCK_ASSERT(sc); 3563 3564 ifp = sc->rl_ifp; 3565 3566 sc->rl_watchdog_timer = 0; 3567 callout_stop(&sc->rl_stat_callout); 3568 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 3569 3570 /* 3571 * Disable accepting frames to put RX MAC into idle state. 3572 * Otherwise it's possible to get frames while stop command 3573 * execution is in progress and controller can DMA the frame 3574 * to already freed RX buffer during that period. 3575 */ 3576 CSR_WRITE_4(sc, RL_RXCFG, CSR_READ_4(sc, RL_RXCFG) & 3577 ~(RL_RXCFG_RX_ALLPHYS | RL_RXCFG_RX_INDIV | RL_RXCFG_RX_MULTI | 3578 RL_RXCFG_RX_BROAD)); 3579 3580 if ((sc->rl_flags & RL_FLAG_WAIT_TXPOLL) != 0) { 3581 for (i = RL_TIMEOUT; i > 0; i--) { 3582 if ((CSR_READ_1(sc, sc->rl_txstart) & 3583 RL_TXSTART_START) == 0) 3584 break; 3585 DELAY(20); 3586 } 3587 if (i == 0) 3588 device_printf(sc->rl_dev, 3589 "stopping TX poll timed out!\n"); 3590 CSR_WRITE_1(sc, RL_COMMAND, 0x00); 3591 } else if ((sc->rl_flags & RL_FLAG_CMDSTOP) != 0) { 3592 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_STOPREQ | RL_CMD_TX_ENB | 3593 RL_CMD_RX_ENB); 3594 if ((sc->rl_flags & RL_FLAG_CMDSTOP_WAIT_TXQ) != 0) { 3595 for (i = RL_TIMEOUT; i > 0; i--) { 3596 if ((CSR_READ_4(sc, RL_TXCFG) & 3597 RL_TXCFG_QUEUE_EMPTY) != 0) 3598 break; 3599 DELAY(100); 3600 } 3601 if (i == 0) 3602 device_printf(sc->rl_dev, 3603 "stopping TXQ timed out!\n"); 3604 } 3605 } else 3606 CSR_WRITE_1(sc, RL_COMMAND, 0x00); 3607 DELAY(1000); 3608 CSR_WRITE_2(sc, RL_IMR, 0x0000); 3609 CSR_WRITE_2(sc, RL_ISR, 0xFFFF); 3610 3611 if (sc->rl_head != NULL) { 3612 m_freem(sc->rl_head); 3613 sc->rl_head = sc->rl_tail = NULL; 3614 } 3615 3616 /* Free the TX list buffers. */ 3617 for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) { 3618 txd = &sc->rl_ldata.rl_tx_desc[i]; 3619 if (txd->tx_m != NULL) { 3620 bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, 3621 txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); 3622 bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, 3623 txd->tx_dmamap); 3624 m_freem(txd->tx_m); 3625 txd->tx_m = NULL; 3626 } 3627 } 3628 3629 /* Free the RX list buffers. */ 3630 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 3631 rxd = &sc->rl_ldata.rl_rx_desc[i]; 3632 if (rxd->rx_m != NULL) { 3633 bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, 3634 rxd->rx_dmamap, BUS_DMASYNC_POSTREAD); 3635 bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, 3636 rxd->rx_dmamap); 3637 m_freem(rxd->rx_m); 3638 rxd->rx_m = NULL; 3639 } 3640 } 3641 3642 if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) { 3643 for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { 3644 rxd = &sc->rl_ldata.rl_jrx_desc[i]; 3645 if (rxd->rx_m != NULL) { 3646 bus_dmamap_sync(sc->rl_ldata.rl_jrx_mtag, 3647 rxd->rx_dmamap, BUS_DMASYNC_POSTREAD); 3648 bus_dmamap_unload(sc->rl_ldata.rl_jrx_mtag, 3649 rxd->rx_dmamap); 3650 m_freem(rxd->rx_m); 3651 rxd->rx_m = NULL; 3652 } 3653 } 3654 } 3655} 3656 3657/* 3658 * Device suspend routine. Stop the interface and save some PCI 3659 * settings in case the BIOS doesn't restore them properly on 3660 * resume. 3661 */ 3662static int 3663re_suspend(device_t dev) 3664{ 3665 struct rl_softc *sc; 3666 3667 sc = device_get_softc(dev); 3668 3669 RL_LOCK(sc); 3670 re_stop(sc); 3671 re_setwol(sc); 3672 sc->suspended = 1; 3673 RL_UNLOCK(sc); 3674 3675 return (0); 3676} 3677 3678/* 3679 * Device resume routine. Restore some PCI settings in case the BIOS 3680 * doesn't, re-enable busmastering, and restart the interface if 3681 * appropriate. 3682 */ 3683static int 3684re_resume(device_t dev) 3685{ 3686 struct rl_softc *sc; 3687 struct ifnet *ifp; 3688 3689 sc = device_get_softc(dev); 3690 3691 RL_LOCK(sc); 3692 3693 ifp = sc->rl_ifp; 3694 /* Take controller out of sleep mode. */ 3695 if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) { 3696 if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80) 3697 CSR_WRITE_1(sc, RL_GPIO, 3698 CSR_READ_1(sc, RL_GPIO) | 0x01); 3699 } 3700 3701 /* 3702 * Clear WOL matching such that normal Rx filtering 3703 * wouldn't interfere with WOL patterns. 3704 */ 3705 re_clrwol(sc); 3706 3707 /* reinitialize interface if necessary */ 3708 if (ifp->if_flags & IFF_UP) 3709 re_init_locked(sc); 3710 3711 sc->suspended = 0; 3712 RL_UNLOCK(sc); 3713 3714 return (0); 3715} 3716 3717/* 3718 * Stop all chip I/O so that the kernel's probe routines don't 3719 * get confused by errant DMAs when rebooting. 3720 */ 3721static int 3722re_shutdown(device_t dev) 3723{ 3724 struct rl_softc *sc; 3725 3726 sc = device_get_softc(dev); 3727 3728 RL_LOCK(sc); 3729 re_stop(sc); 3730 /* 3731 * Mark interface as down since otherwise we will panic if 3732 * interrupt comes in later on, which can happen in some 3733 * cases. 3734 */ 3735 sc->rl_ifp->if_flags &= ~IFF_UP; 3736 re_setwol(sc); 3737 RL_UNLOCK(sc); 3738 3739 return (0); 3740} 3741 3742static void 3743re_set_linkspeed(struct rl_softc *sc) 3744{ 3745 struct mii_softc *miisc; 3746 struct mii_data *mii; 3747 int aneg, i, phyno; 3748 3749 RL_LOCK_ASSERT(sc); 3750 3751 mii = device_get_softc(sc->rl_miibus); 3752 mii_pollstat(mii); 3753 aneg = 0; 3754 if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) == 3755 (IFM_ACTIVE | IFM_AVALID)) { 3756 switch IFM_SUBTYPE(mii->mii_media_active) { 3757 case IFM_10_T: 3758 case IFM_100_TX: 3759 return; 3760 case IFM_1000_T: 3761 aneg++; 3762 break; 3763 default: 3764 break; 3765 } 3766 } 3767 miisc = LIST_FIRST(&mii->mii_phys); 3768 phyno = miisc->mii_phy; 3769 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) 3770 PHY_RESET(miisc); 3771 re_miibus_writereg(sc->rl_dev, phyno, MII_100T2CR, 0); 3772 re_miibus_writereg(sc->rl_dev, phyno, 3773 MII_ANAR, ANAR_TX_FD | ANAR_TX | ANAR_10_FD | ANAR_10 | ANAR_CSMA); 3774 re_miibus_writereg(sc->rl_dev, phyno, 3775 MII_BMCR, BMCR_AUTOEN | BMCR_STARTNEG); 3776 DELAY(1000); 3777 if (aneg != 0) { 3778 /* 3779 * Poll link state until re(4) get a 10/100Mbps link. 3780 */ 3781 for (i = 0; i < MII_ANEGTICKS_GIGE; i++) { 3782 mii_pollstat(mii); 3783 if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) 3784 == (IFM_ACTIVE | IFM_AVALID)) { 3785 switch (IFM_SUBTYPE(mii->mii_media_active)) { 3786 case IFM_10_T: 3787 case IFM_100_TX: 3788 return; 3789 default: 3790 break; 3791 } 3792 } 3793 RL_UNLOCK(sc); 3794 pause("relnk", hz); 3795 RL_LOCK(sc); 3796 } 3797 if (i == MII_ANEGTICKS_GIGE) 3798 device_printf(sc->rl_dev, 3799 "establishing a link failed, WOL may not work!"); 3800 } 3801 /* 3802 * No link, force MAC to have 100Mbps, full-duplex link. 3803 * MAC does not require reprogramming on resolved speed/duplex, 3804 * so this is just for completeness. 3805 */ 3806 mii->mii_media_status = IFM_AVALID | IFM_ACTIVE; 3807 mii->mii_media_active = IFM_ETHER | IFM_100_TX | IFM_FDX; 3808} 3809 3810static void 3811re_setwol(struct rl_softc *sc) 3812{ 3813 struct ifnet *ifp; 3814 int pmc; 3815 uint16_t pmstat; 3816 uint8_t v; 3817 3818 RL_LOCK_ASSERT(sc); 3819 3820 if (pci_find_cap(sc->rl_dev, PCIY_PMG, &pmc) != 0) 3821 return; 3822 3823 ifp = sc->rl_ifp; 3824 /* Put controller into sleep mode. */ 3825 if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) { 3826 if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80) 3827 CSR_WRITE_1(sc, RL_GPIO, 3828 CSR_READ_1(sc, RL_GPIO) & ~0x01); 3829 } 3830 if ((ifp->if_capenable & IFCAP_WOL) != 0) { 3831 re_set_rxmode(sc); 3832 if ((sc->rl_flags & RL_FLAG_WOL_MANLINK) != 0) 3833 re_set_linkspeed(sc); 3834 if ((sc->rl_flags & RL_FLAG_WOLRXENB) != 0) 3835 CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RX_ENB); 3836 } 3837 /* Enable config register write. */ 3838 CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); 3839 3840 /* Enable PME. */ 3841 v = CSR_READ_1(sc, sc->rl_cfg1); 3842 v &= ~RL_CFG1_PME; 3843 if ((ifp->if_capenable & IFCAP_WOL) != 0) 3844 v |= RL_CFG1_PME; 3845 CSR_WRITE_1(sc, sc->rl_cfg1, v); 3846 3847 v = CSR_READ_1(sc, sc->rl_cfg3); 3848 v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC); 3849 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) 3850 v |= RL_CFG3_WOL_MAGIC; 3851 CSR_WRITE_1(sc, sc->rl_cfg3, v); 3852 3853 v = CSR_READ_1(sc, sc->rl_cfg5); 3854 v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST | 3855 RL_CFG5_WOL_LANWAKE); 3856 if ((ifp->if_capenable & IFCAP_WOL_UCAST) != 0) 3857 v |= RL_CFG5_WOL_UCAST; 3858 if ((ifp->if_capenable & IFCAP_WOL_MCAST) != 0) 3859 v |= RL_CFG5_WOL_MCAST | RL_CFG5_WOL_BCAST; 3860 if ((ifp->if_capenable & IFCAP_WOL) != 0) 3861 v |= RL_CFG5_WOL_LANWAKE; 3862 CSR_WRITE_1(sc, sc->rl_cfg5, v); 3863 3864 /* Config register write done. */ 3865 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 3866 3867 if ((ifp->if_capenable & IFCAP_WOL) == 0 && 3868 (sc->rl_flags & RL_FLAG_PHYWAKE_PM) != 0) 3869 CSR_WRITE_1(sc, RL_PMCH, CSR_READ_1(sc, RL_PMCH) & ~0x80); 3870 /* 3871 * It seems that hardware resets its link speed to 100Mbps in 3872 * power down mode so switching to 100Mbps in driver is not 3873 * needed. 3874 */ 3875 3876 /* Request PME if WOL is requested. */ 3877 pmstat = pci_read_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, 2); 3878 pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE); 3879 if ((ifp->if_capenable & IFCAP_WOL) != 0) 3880 pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE; 3881 pci_write_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, pmstat, 2); 3882} 3883 3884static void 3885re_clrwol(struct rl_softc *sc) 3886{ 3887 int pmc; 3888 uint8_t v; 3889 3890 RL_LOCK_ASSERT(sc); 3891 3892 if (pci_find_cap(sc->rl_dev, PCIY_PMG, &pmc) != 0) 3893 return; 3894 3895 /* Enable config register write. */ 3896 CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); 3897 3898 v = CSR_READ_1(sc, sc->rl_cfg3); 3899 v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC); 3900 CSR_WRITE_1(sc, sc->rl_cfg3, v); 3901 3902 /* Config register write done. */ 3903 CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); 3904 3905 v = CSR_READ_1(sc, sc->rl_cfg5); 3906 v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST); 3907 v &= ~RL_CFG5_WOL_LANWAKE; 3908 CSR_WRITE_1(sc, sc->rl_cfg5, v); 3909} 3910 3911static void 3912re_add_sysctls(struct rl_softc *sc) 3913{ 3914 struct sysctl_ctx_list *ctx; 3915 struct sysctl_oid_list *children; 3916 int error; 3917 3918 ctx = device_get_sysctl_ctx(sc->rl_dev); 3919 children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->rl_dev)); 3920 3921 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "stats", 3922 CTLTYPE_INT | CTLFLAG_RW, sc, 0, re_sysctl_stats, "I", 3923 "Statistics Information"); 3924 if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) == 0) 3925 return; 3926 3927 SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "int_rx_mod", 3928 CTLTYPE_INT | CTLFLAG_RW, &sc->rl_int_rx_mod, 0, 3929 sysctl_hw_re_int_mod, "I", "re RX interrupt moderation"); 3930 /* Pull in device tunables. */ 3931 sc->rl_int_rx_mod = RL_TIMER_DEFAULT; 3932 error = resource_int_value(device_get_name(sc->rl_dev), 3933 device_get_unit(sc->rl_dev), "int_rx_mod", &sc->rl_int_rx_mod); 3934 if (error == 0) { 3935 if (sc->rl_int_rx_mod < RL_TIMER_MIN || 3936 sc->rl_int_rx_mod > RL_TIMER_MAX) { 3937 device_printf(sc->rl_dev, "int_rx_mod value out of " 3938 "range; using default: %d\n", 3939 RL_TIMER_DEFAULT); 3940 sc->rl_int_rx_mod = RL_TIMER_DEFAULT; 3941 } 3942 } 3943 3944} 3945 3946static int 3947re_sysctl_stats(SYSCTL_HANDLER_ARGS) 3948{ 3949 struct rl_softc *sc; 3950 struct rl_stats *stats; 3951 int error, i, result; 3952 3953 result = -1; 3954 error = sysctl_handle_int(oidp, &result, 0, req); 3955 if (error || req->newptr == NULL) 3956 return (error); 3957 3958 if (result == 1) { 3959 sc = (struct rl_softc *)arg1; 3960 RL_LOCK(sc); 3961 if ((sc->rl_ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { 3962 RL_UNLOCK(sc); 3963 goto done; 3964 } 3965 bus_dmamap_sync(sc->rl_ldata.rl_stag, 3966 sc->rl_ldata.rl_smap, BUS_DMASYNC_PREREAD); 3967 CSR_WRITE_4(sc, RL_DUMPSTATS_HI, 3968 RL_ADDR_HI(sc->rl_ldata.rl_stats_addr)); 3969 CSR_WRITE_4(sc, RL_DUMPSTATS_LO, 3970 RL_ADDR_LO(sc->rl_ldata.rl_stats_addr)); 3971 CSR_WRITE_4(sc, RL_DUMPSTATS_LO, 3972 RL_ADDR_LO(sc->rl_ldata.rl_stats_addr | 3973 RL_DUMPSTATS_START)); 3974 for (i = RL_TIMEOUT; i > 0; i--) { 3975 if ((CSR_READ_4(sc, RL_DUMPSTATS_LO) & 3976 RL_DUMPSTATS_START) == 0) 3977 break; 3978 DELAY(1000); 3979 } 3980 bus_dmamap_sync(sc->rl_ldata.rl_stag, 3981 sc->rl_ldata.rl_smap, BUS_DMASYNC_POSTREAD); 3982 RL_UNLOCK(sc); 3983 if (i == 0) { 3984 device_printf(sc->rl_dev, 3985 "DUMP statistics request timedout\n"); 3986 return (ETIMEDOUT); 3987 } 3988done: 3989 stats = sc->rl_ldata.rl_stats; 3990 printf("%s statistics:\n", device_get_nameunit(sc->rl_dev)); 3991 printf("Tx frames : %ju\n", 3992 (uintmax_t)le64toh(stats->rl_tx_pkts)); 3993 printf("Rx frames : %ju\n", 3994 (uintmax_t)le64toh(stats->rl_rx_pkts)); 3995 printf("Tx errors : %ju\n", 3996 (uintmax_t)le64toh(stats->rl_tx_errs)); 3997 printf("Rx errors : %u\n", 3998 le32toh(stats->rl_rx_errs)); 3999 printf("Rx missed frames : %u\n", 4000 (uint32_t)le16toh(stats->rl_missed_pkts)); 4001 printf("Rx frame alignment errs : %u\n", 4002 (uint32_t)le16toh(stats->rl_rx_framealign_errs)); 4003 printf("Tx single collisions : %u\n", 4004 le32toh(stats->rl_tx_onecoll)); 4005 printf("Tx multiple collisions : %u\n", 4006 le32toh(stats->rl_tx_multicolls)); 4007 printf("Rx unicast frames : %ju\n", 4008 (uintmax_t)le64toh(stats->rl_rx_ucasts)); 4009 printf("Rx broadcast frames : %ju\n", 4010 (uintmax_t)le64toh(stats->rl_rx_bcasts)); 4011 printf("Rx multicast frames : %u\n", 4012 le32toh(stats->rl_rx_mcasts)); 4013 printf("Tx aborts : %u\n", 4014 (uint32_t)le16toh(stats->rl_tx_aborts)); 4015 printf("Tx underruns : %u\n", 4016 (uint32_t)le16toh(stats->rl_rx_underruns)); 4017 } 4018 4019 return (error); 4020} 4021 4022static int 4023sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high) 4024{ 4025 int error, value; 4026 4027 if (arg1 == NULL) 4028 return (EINVAL); 4029 value = *(int *)arg1; 4030 error = sysctl_handle_int(oidp, &value, 0, req); 4031 if (error || req->newptr == NULL) 4032 return (error); 4033 if (value < low || value > high) 4034 return (EINVAL); 4035 *(int *)arg1 = value; 4036 4037 return (0); 4038} 4039 4040static int 4041sysctl_hw_re_int_mod(SYSCTL_HANDLER_ARGS) 4042{ 4043 4044 return (sysctl_int_range(oidp, arg1, arg2, req, RL_TIMER_MIN, 4045 RL_TIMER_MAX)); 4046} 4047