vpo.c revision 46586 
1/*-
2 * Copyright (c) 1997, 1998 Nicolas Souchu
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 *	$Id: vpo.c,v 1.13 1999/05/06 21:12:52 ken Exp $
27 *
28 */
29
30#ifdef KERNEL
31#include <sys/param.h>
32#include <sys/systm.h>
33#include <sys/malloc.h>
34#include <sys/buf.h>
35
36#include <machine/clock.h>
37
38#endif	/* KERNEL */
39
40#include <cam/cam.h>
41#include <cam/cam_ccb.h>
42#include <cam/cam_sim.h>
43#include <cam/cam_xpt_sim.h>
44#include <cam/cam_debug.h>
45
46#include <cam/scsi/scsi_all.h>
47#include <cam/scsi/scsi_message.h>
48#include <cam/scsi/scsi_da.h>
49
50#ifdef	KERNEL
51#include <sys/kernel.h>
52#endif /*KERNEL */
53
54#include "opt_vpo.h"
55
56#include <dev/ppbus/ppbconf.h>
57#include <dev/ppbus/vpoio.h>
58
59struct vpo_sense {
60	struct scsi_sense cmd;
61	unsigned int stat;
62	unsigned int count;
63};
64
65struct vpo_data {
66	unsigned short vpo_unit;
67
68	int vpo_stat;
69	int vpo_count;
70	int vpo_error;
71
72	int vpo_isplus;
73
74	struct cam_sim  *sim;
75	struct cam_path *path;
76
77	struct vpo_sense vpo_sense;
78
79	struct vpoio_data vpo_io;	/* interface to low level functions */
80};
81
82/* cam related functions */
83static void	vpo_action(struct cam_sim *sim, union ccb *ccb);
84static void	vpo_poll(struct cam_sim *sim);
85
86static int	nvpo = 0;
87#define MAXVP0	8			/* XXX not much better! */
88static struct vpo_data *vpodata[MAXVP0];
89
90#ifdef KERNEL
91
92/*
93 * Make ourselves visible as a ppbus driver
94 */
95static struct ppb_device	*vpoprobe(struct ppb_data *ppb);
96static int			vpoattach(struct ppb_device *dev);
97
98static struct ppb_driver vpodriver = {
99    vpoprobe, vpoattach, "vpo"
100};
101DATA_SET(ppbdriver_set, vpodriver);
102
103#endif /* KERNEL */
104
105/*
106 * vpoprobe()
107 *
108 * Called by ppb_attachdevs().
109 */
110static struct ppb_device *
111vpoprobe(struct ppb_data *ppb)
112{
113	struct vpo_data *vpo;
114	struct ppb_device *dev;
115
116	if (nvpo >= MAXVP0) {
117		printf("vpo: Too many devices (max %d)\n", MAXVP0);
118		return(NULL);
119	}
120
121	vpo = (struct vpo_data *)malloc(sizeof(struct vpo_data),
122							M_DEVBUF, M_NOWAIT);
123	if (!vpo) {
124		printf("vpo: cannot malloc!\n");
125		return(NULL);
126	}
127	bzero(vpo, sizeof(struct vpo_data));
128
129	vpodata[nvpo] = vpo;
130
131	/* vpo dependent initialisation */
132	vpo->vpo_unit = nvpo;
133
134	/* ok, go to next device on next probe */
135	nvpo ++;
136
137	/* low level probe */
138	vpoio_set_unit(&vpo->vpo_io, vpo->vpo_unit);
139
140	/* check ZIP before ZIP+ or imm_probe() will send controls to
141	 * the printer or whatelse connected to the port */
142	if ((dev = vpoio_probe(ppb, &vpo->vpo_io))) {
143		vpo->vpo_isplus = 0;
144	} else if ((dev = imm_probe(ppb, &vpo->vpo_io))) {
145		vpo->vpo_isplus = 1;
146	} else {
147		free(vpo, M_DEVBUF);
148		return (NULL);
149	}
150
151	return (dev);
152}
153
154/*
155 * vpoattach()
156 *
157 * Called by ppb_attachdevs().
158 */
159static int
160vpoattach(struct ppb_device *dev)
161{
162	struct vpo_data *vpo = vpodata[dev->id_unit];
163	struct cam_devq *devq;
164
165	/* low level attachment */
166	if (vpo->vpo_isplus) {
167		if (!imm_attach(&vpo->vpo_io))
168			return (0);
169	} else {
170		if (!vpoio_attach(&vpo->vpo_io))
171			return (0);
172	}
173
174	/*
175	**	Now tell the generic SCSI layer
176	**	about our bus.
177	*/
178	devq = cam_simq_alloc(/*maxopenings*/1);
179	/* XXX What about low-level detach on error? */
180	if (devq == NULL)
181		return (0);
182
183	vpo->sim = cam_sim_alloc(vpo_action, vpo_poll, "vpo", vpo, dev->id_unit,
184				 /*untagged*/1, /*tagged*/0, devq);
185	if (vpo->sim == NULL) {
186		cam_simq_free(devq);
187		return (0);
188	}
189
190	if (xpt_bus_register(vpo->sim, /*bus*/0) != CAM_SUCCESS) {
191		cam_sim_free(vpo->sim, /*free_devq*/TRUE);
192		return (0);
193	}
194
195	if (xpt_create_path(&vpo->path, /*periph*/NULL,
196			    cam_sim_path(vpo->sim), CAM_TARGET_WILDCARD,
197			    CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
198		xpt_bus_deregister(cam_sim_path(vpo->sim));
199		cam_sim_free(vpo->sim, /*free_devq*/TRUE);
200		return (0);
201	}
202
203	/* all went ok */
204
205	return (1);
206}
207
208/*
209 * vpo_intr()
210 */
211static void
212vpo_intr(struct vpo_data *vpo, struct ccb_scsiio *csio)
213{
214	int errno;	/* error in errno.h */
215	int s;
216#ifdef VP0_DEBUG
217	int i;
218#endif
219
220	s = splcam();
221
222	if (vpo->vpo_isplus) {
223		errno = imm_do_scsi(&vpo->vpo_io, VP0_INITIATOR,
224			csio->ccb_h.target_id,
225			(char *)&csio->cdb_io.cdb_bytes, csio->cdb_len,
226			(char *)csio->data_ptr, csio->dxfer_len,
227			&vpo->vpo_stat, &vpo->vpo_count, &vpo->vpo_error);
228	} else {
229		errno = vpoio_do_scsi(&vpo->vpo_io, VP0_INITIATOR,
230			csio->ccb_h.target_id,
231			(char *)&csio->cdb_io.cdb_bytes, csio->cdb_len,
232			(char *)csio->data_ptr, csio->dxfer_len,
233			&vpo->vpo_stat, &vpo->vpo_count, &vpo->vpo_error);
234	}
235
236#ifdef VP0_DEBUG
237	printf("vpo_do_scsi = %d, status = 0x%x, count = %d, vpo_error = %d\n",
238		 errno, vpo->vpo_stat, vpo->vpo_count, vpo->vpo_error);
239
240	/* dump of command */
241	for (i=0; i<csio->cdb_len; i++)
242		printf("%x ", ((char *)&csio->cdb_io.cdb_bytes)[i]);
243
244	printf("\n");
245#endif
246
247	if (errno) {
248		/* connection to ppbus interrupted */
249		csio->ccb_h.status = CAM_CMD_TIMEOUT;
250		goto error;
251	}
252
253	/* if a timeout occured, no sense */
254	if (vpo->vpo_error) {
255		if (vpo->vpo_error != VP0_ESELECT_TIMEOUT)
256			printf("vpo%d: VP0 error/timeout (%d)\n",
257				vpo->vpo_unit, vpo->vpo_error);
258
259		csio->ccb_h.status = CAM_CMD_TIMEOUT;
260		goto error;
261	}
262
263	/* check scsi status */
264	if (vpo->vpo_stat != SCSI_STATUS_OK) {
265	   csio->scsi_status = vpo->vpo_stat;
266
267	   /* check if we have to sense the drive */
268	   if ((vpo->vpo_stat & SCSI_STATUS_CHECK_COND) != 0) {
269
270		vpo->vpo_sense.cmd.opcode = REQUEST_SENSE;
271		vpo->vpo_sense.cmd.length = csio->sense_len;
272		vpo->vpo_sense.cmd.control = 0;
273
274		if (vpo->vpo_isplus) {
275			errno = imm_do_scsi(&vpo->vpo_io, VP0_INITIATOR,
276				csio->ccb_h.target_id,
277				(char *)&vpo->vpo_sense.cmd,
278				sizeof(vpo->vpo_sense.cmd),
279				(char *)&csio->sense_data, csio->sense_len,
280				&vpo->vpo_sense.stat, &vpo->vpo_sense.count,
281				&vpo->vpo_error);
282		} else {
283			errno = vpoio_do_scsi(&vpo->vpo_io, VP0_INITIATOR,
284				csio->ccb_h.target_id,
285				(char *)&vpo->vpo_sense.cmd,
286				sizeof(vpo->vpo_sense.cmd),
287				(char *)&csio->sense_data, csio->sense_len,
288				&vpo->vpo_sense.stat, &vpo->vpo_sense.count,
289				&vpo->vpo_error);
290		}
291
292
293#ifdef VP0_DEBUG
294		printf("(sense) vpo_do_scsi = %d, status = 0x%x, count = %d, vpo_error = %d\n",
295			errno, vpo->vpo_sense.stat, vpo->vpo_sense.count, vpo->vpo_error);
296#endif
297
298		/* check sense return status */
299		if (errno == 0 && vpo->vpo_sense.stat == SCSI_STATUS_OK) {
300		   /* sense ok */
301		   csio->ccb_h.status = CAM_AUTOSNS_VALID | CAM_SCSI_STATUS_ERROR;
302		   csio->sense_resid = csio->sense_len - vpo->vpo_sense.count;
303
304#ifdef VP0_DEBUG
305		   /* dump of sense info */
306		   printf("(sense) ");
307		   for (i=0; i<vpo->vpo_sense.count; i++)
308			printf("%x ", ((char *)&csio->sense_data)[i]);
309		   printf("\n");
310#endif
311
312		} else {
313		   /* sense failed */
314		   csio->ccb_h.status = CAM_AUTOSENSE_FAIL;
315		}
316	   } else {
317		/* no sense */
318		csio->ccb_h.status = CAM_SCSI_STATUS_ERROR;
319	   }
320
321	   goto error;
322	}
323
324	csio->resid = csio->dxfer_len - vpo->vpo_count;
325	csio->ccb_h.status = CAM_REQ_CMP;
326
327error:
328	splx(s);
329
330	return;
331}
332
333static void
334vpo_action(struct cam_sim *sim, union ccb *ccb)
335{
336
337	struct vpo_data *vpo = (struct vpo_data *)sim->softc;
338
339	switch (ccb->ccb_h.func_code) {
340	case XPT_SCSI_IO:
341	{
342		struct ccb_scsiio *csio;
343
344		csio = &ccb->csio;
345
346#ifdef VP0_DEBUG
347		printf("vpo%d: XPT_SCSI_IO (0x%x) request\n",
348			vpo->vpo_unit, csio->cdb_io.cdb_bytes[0]);
349#endif
350
351		vpo_intr(vpo, csio);
352
353		xpt_done(ccb);
354
355		break;
356	}
357	case XPT_CALC_GEOMETRY:
358	{
359		struct	  ccb_calc_geometry *ccg;
360		u_int32_t size_mb;
361		u_int32_t secs_per_cylinder;
362
363		ccg = &ccb->ccg;
364		size_mb = ccg->volume_size
365			/ ((1024L * 1024L) / ccg->block_size);
366
367#ifdef VP0_DEBUG
368		printf("vpo%d: XPT_CALC_GEOMETRY (%d, %d) request\n",
369			vpo->vpo_unit, ccg->volume_size, ccg->block_size);
370#endif
371
372		ccg->heads = 64;
373		ccg->secs_per_track = 32;
374
375		secs_per_cylinder = ccg->heads * ccg->secs_per_track;
376		ccg->cylinders = ccg->volume_size / secs_per_cylinder;
377
378		ccb->ccb_h.status = CAM_REQ_CMP;
379		xpt_done(ccb);
380		break;
381	}
382	case XPT_RESET_BUS:		/* Reset the specified SCSI bus */
383	{
384
385#ifdef VP0_DEBUG
386		printf("vpo%d: XPT_RESET_BUS request\n", vpo->vpo_unit);
387#endif
388
389		if (vpo->vpo_isplus) {
390			if (imm_reset_bus(&vpo->vpo_io)) {
391				ccb->ccb_h.status = CAM_REQ_CMP_ERR;
392				xpt_done(ccb);
393				return;
394			}
395		} else {
396			if (vpoio_reset_bus(&vpo->vpo_io)) {
397				ccb->ccb_h.status = CAM_REQ_CMP_ERR;
398				xpt_done(ccb);
399				return;
400			}
401		}
402
403		ccb->ccb_h.status = CAM_REQ_CMP;
404		xpt_done(ccb);
405		break;
406	}
407	case XPT_PATH_INQ:		/* Path routing inquiry */
408	{
409		struct ccb_pathinq *cpi = &ccb->cpi;
410
411#ifdef VP0_DEBUG
412		printf("vpo%d: XPT_PATH_INQ request\n", vpo->vpo_unit);
413#endif
414		cpi->version_num = 1; /* XXX??? */
415		cpi->hba_inquiry = 0;
416		cpi->target_sprt = 0;
417		cpi->hba_misc = 0;
418		cpi->hba_eng_cnt = 0;
419		cpi->max_target = 7;
420		cpi->max_lun = 0;
421		cpi->initiator_id = VP0_INITIATOR;
422		cpi->bus_id = sim->bus_id;
423		cpi->base_transfer_speed = 93;
424		strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
425		strncpy(cpi->hba_vid, "Iomega", HBA_IDLEN);
426		strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
427		cpi->unit_number = sim->unit_number;
428
429		cpi->ccb_h.status = CAM_REQ_CMP;
430		xpt_done(ccb);
431		break;
432	}
433	default:
434		ccb->ccb_h.status = CAM_REQ_INVALID;
435		xpt_done(ccb);
436		break;
437	}
438
439	return;
440}
441
442static void
443vpo_poll(struct cam_sim *sim)
444{
445	/* The ZIP is actually always polled throw vpo_action() */
446	return;
447}
448