mfireg.h revision 253244
1/*- 2 * Copyright (c) 2006 IronPort Systems 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26/*- 27 * Copyright (c) 2007 LSI Corp. 28 * Copyright (c) 2007 Rajesh Prabhakaran. 29 * All rights reserved. 30 * 31 * Redistribution and use in source and binary forms, with or without 32 * modification, are permitted provided that the following conditions 33 * are met: 34 * 1. Redistributions of source code must retain the above copyright 35 * notice, this list of conditions and the following disclaimer. 36 * 2. Redistributions in binary form must reproduce the above copyright 37 * notice, this list of conditions and the following disclaimer in the 38 * documentation and/or other materials provided with the distribution. 39 * 40 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 41 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 42 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 43 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 44 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 45 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 46 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 47 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 48 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 49 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 50 * SUCH DAMAGE. 51 */ 52 53#ifndef _MFIREG_H 54#define _MFIREG_H 55 56#include <sys/cdefs.h> 57__FBSDID("$FreeBSD: stable/9/sys/dev/mfi/mfireg.h 253244 2013-07-12 02:26:15Z sbruno $"); 58 59/* 60 * MegaRAID SAS MFI firmware definitions 61 * 62 * Calling this driver 'MegaRAID SAS' is a bit misleading. It's a completely 63 * new firmware interface from the old AMI MegaRAID one, and there is no 64 * reason why this interface should be limited to just SAS. In any case, LSI 65 * seems to also call this interface 'MFI', so that will be used here. 66 */ 67#define MEGAMFI_FRAME_SIZE 64 68/* 69 * Start with the register set. All registers are 32 bits wide. 70 * The usual Intel IOP style setup. 71 */ 72#define MFI_IMSG0 0x10 /* Inbound message 0 */ 73#define MFI_IMSG1 0x14 /* Inbound message 1 */ 74#define MFI_OMSG0 0x18 /* Outbound message 0 */ 75#define MFI_OMSG1 0x1c /* Outbound message 1 */ 76#define MFI_IDB 0x20 /* Inbound doorbell */ 77#define MFI_ISTS 0x24 /* Inbound interrupt status */ 78#define MFI_IMSK 0x28 /* Inbound interrupt mask */ 79#define MFI_ODB 0x2c /* Outbound doorbell */ 80#define MFI_OSTS 0x30 /* Outbound interrupt status */ 81#define MFI_OMSK 0x34 /* Outbound interrupt mask */ 82#define MFI_IQP 0x40 /* Inbound queue port */ 83#define MFI_OQP 0x44 /* Outbound queue port */ 84 85/* 86* ThunderBolt specific Register 87*/ 88 89#define MFI_RFPI 0x48 /* reply_free_post_host_index */ 90#define MFI_RPI 0x6c /* reply_post_host_index */ 91#define MFI_ILQP 0xc0 /* inbound_low_queue_port */ 92#define MFI_IHQP 0xc4 /* inbound_high_queue_port */ 93 94/* 95 * 1078 specific related register 96 */ 97#define MFI_ODR0 0x9c /* outbound doorbell register0 */ 98#define MFI_ODCR0 0xa0 /* outbound doorbell clear register0 */ 99#define MFI_OSP0 0xb0 /* outbound scratch pad0 */ 100#define MFI_1078_EIM 0x80000004 /* 1078 enable intrrupt mask */ 101#define MFI_RMI 0x2 /* reply message interrupt */ 102#define MFI_1078_RM 0x80000000 /* reply 1078 message interrupt */ 103#define MFI_ODC 0x4 /* outbound doorbell change interrupt */ 104 105/* OCR registers */ 106#define MFI_WSR 0x004 /* write sequence register */ 107#define MFI_HDR 0x008 /* host diagnostic register */ 108#define MFI_RSR 0x3c3 /* Reset Status Register */ 109 110/* 111 * GEN2 specific changes 112 */ 113#define MFI_GEN2_EIM 0x00000005 /* GEN2 enable interrupt mask */ 114#define MFI_GEN2_RM 0x00000001 /* reply GEN2 message interrupt */ 115 116/* 117 * skinny specific changes 118 */ 119#define MFI_SKINNY_IDB 0x00 /* Inbound doorbell is at 0x00 for skinny */ 120#define MFI_IQPL 0x000000c0 121#define MFI_IQPH 0x000000c4 122#define MFI_SKINNY_RM 0x00000001 /* reply skinny message interrupt */ 123 124/* Bits for MFI_OSTS */ 125#define MFI_OSTS_INTR_VALID 0x00000002 126 127/* OCR specific flags */ 128#define MFI_FIRMWARE_STATE_CHANGE 0x00000002 129#define MFI_STATE_CHANGE_INTERRUPT 0x00000004 /* MFI state change interrrupt */ 130 131/* 132 * Firmware state values. Found in OMSG0 during initialization. 133 */ 134#define MFI_FWSTATE_MASK 0xf0000000 135#define MFI_FWSTATE_UNDEFINED 0x00000000 136#define MFI_FWSTATE_BB_INIT 0x10000000 137#define MFI_FWSTATE_FW_INIT 0x40000000 138#define MFI_FWSTATE_WAIT_HANDSHAKE 0x60000000 139#define MFI_FWSTATE_FW_INIT_2 0x70000000 140#define MFI_FWSTATE_DEVICE_SCAN 0x80000000 141#define MFI_FWSTATE_BOOT_MESSAGE_PENDING 0x90000000 142#define MFI_FWSTATE_FLUSH_CACHE 0xa0000000 143#define MFI_FWSTATE_READY 0xb0000000 144#define MFI_FWSTATE_OPERATIONAL 0xc0000000 145#define MFI_FWSTATE_FAULT 0xf0000000 146#define MFI_FWSTATE_MAXSGL_MASK 0x00ff0000 147#define MFI_FWSTATE_MAXCMD_MASK 0x0000ffff 148#define MFI_FWSTATE_HOSTMEMREQD_MASK 0x08000000 149#define MFI_FWSTATE_BOOT_MESSAGE_PENDING 0x90000000 150#define MFI_RESET_REQUIRED 0x00000001 151 152/* ThunderBolt Support */ 153#define MFI_FWSTATE_TB_MASK 0xf0000000 154#define MFI_FWSTATE_TB_RESET 0x00000000 155#define MFI_FWSTATE_TB_READY 0x10000000 156#define MFI_FWSTATE_TB_OPERATIONAL 0x20000000 157#define MFI_FWSTATE_TB_FAULT 0x40000000 158 159/* 160 * Control bits to drive the card to ready state. These go into the IDB 161 * register. 162 */ 163#define MFI_FWINIT_ABORT 0x00000000 /* Abort all pending commands */ 164#define MFI_FWINIT_READY 0x00000002 /* Move from operational to ready */ 165#define MFI_FWINIT_MFIMODE 0x00000004 /* unknown */ 166#define MFI_FWINIT_CLEAR_HANDSHAKE 0x00000008 /* Respond to WAIT_HANDSHAKE */ 167#define MFI_FWINIT_HOTPLUG 0x00000010 168 169/* ADP reset flags */ 170#define MFI_STOP_ADP 0x00000020 171#define MFI_ADP_RESET 0x00000040 172#define DIAG_WRITE_ENABLE 0x00000080 173#define DIAG_RESET_ADAPTER 0x00000004 174 175/* MFI Commands */ 176typedef enum { 177 MFI_CMD_INIT = 0x00, 178 MFI_CMD_LD_READ, 179 MFI_CMD_LD_WRITE, 180 MFI_CMD_LD_SCSI_IO, 181 MFI_CMD_PD_SCSI_IO, 182 MFI_CMD_DCMD, 183 MFI_CMD_ABORT, 184 MFI_CMD_SMP, 185 MFI_CMD_STP 186} mfi_cmd_t; 187 188/* Direct commands */ 189typedef enum { 190 MFI_DCMD_CTRL_GETINFO = 0x01010000, 191 MFI_DCMD_CTRL_MFI_HOST_MEM_ALLOC =0x0100e100, 192 MFI_DCMD_CTRL_MFC_DEFAULTS_GET =0x010e0201, 193 MFI_DCMD_CTRL_MFC_DEFAULTS_SET =0x010e0202, 194 MFI_DCMD_CTRL_FLUSHCACHE = 0x01101000, 195 MFI_DCMD_CTRL_SHUTDOWN = 0x01050000, 196 MFI_DCMD_CTRL_EVENT_GETINFO = 0x01040100, 197 MFI_DCMD_CTRL_EVENT_GET = 0x01040300, 198 MFI_DCMD_CTRL_EVENT_WAIT = 0x01040500, 199 MFI_DCMD_PR_GET_STATUS = 0x01070100, 200 MFI_DCMD_PR_GET_PROPERTIES = 0x01070200, 201 MFI_DCMD_PR_SET_PROPERTIES = 0x01070300, 202 MFI_DCMD_PR_START = 0x01070400, 203 MFI_DCMD_PR_STOP = 0x01070500, 204 MFI_DCMD_TIME_SECS_GET = 0x01080201, 205 MFI_DCMD_FLASH_FW_OPEN = 0x010f0100, 206 MFI_DCMD_FLASH_FW_DOWNLOAD = 0x010f0200, 207 MFI_DCMD_FLASH_FW_FLASH = 0x010f0300, 208 MFI_DCMD_FLASH_FW_CLOSE = 0x010f0400, 209 MFI_DCMD_PD_GET_LIST = 0x02010000, 210 MFI_DCMD_PD_LIST_QUERY = 0x02010100, 211 MFI_DCMD_PD_GET_INFO = 0x02020000, 212 MFI_DCMD_PD_STATE_SET = 0x02030100, 213 MFI_DCMD_PD_REBUILD_START = 0x02040100, 214 MFI_DCMD_PD_REBUILD_ABORT = 0x02040200, 215 MFI_DCMD_PD_CLEAR_START = 0x02050100, 216 MFI_DCMD_PD_CLEAR_ABORT = 0x02050200, 217 MFI_DCMD_PD_GET_PROGRESS = 0x02060000, 218 MFI_DCMD_PD_LOCATE_START = 0x02070100, 219 MFI_DCMD_PD_LOCATE_STOP = 0x02070200, 220 MFI_DCMD_LD_MAP_GET_INFO = 0x0300e101, 221 MFI_DCMD_LD_SYNC = 0x0300e102, 222 MFI_DCMD_LD_GET_LIST = 0x03010000, 223 MFI_DCMD_LD_GET_INFO = 0x03020000, 224 MFI_DCMD_LD_GET_PROP = 0x03030000, 225 MFI_DCMD_LD_SET_PROP = 0x03040000, 226 MFI_DCMD_LD_INIT_START = 0x03060100, 227 MFI_DCMD_LD_DELETE = 0x03090000, 228 MFI_DCMD_CFG_READ = 0x04010000, 229 MFI_DCMD_CFG_ADD = 0x04020000, 230 MFI_DCMD_CFG_CLEAR = 0x04030000, 231 MFI_DCMD_CFG_MAKE_SPARE = 0x04040000, 232 MFI_DCMD_CFG_REMOVE_SPARE = 0x04050000, 233 MFI_DCMD_CFG_FOREIGN_SCAN = 0x04060100, 234 MFI_DCMD_CFG_FOREIGN_DISPLAY = 0x04060200, 235 MFI_DCMD_CFG_FOREIGN_PREVIEW = 0x04060300, 236 MFI_DCMD_CFG_FOREIGN_IMPORT = 0x04060400, 237 MFI_DCMD_CFG_FOREIGN_CLEAR = 0x04060500, 238 MFI_DCMD_BBU_GET_STATUS = 0x05010000, 239 MFI_DCMD_BBU_GET_CAPACITY_INFO =0x05020000, 240 MFI_DCMD_BBU_GET_DESIGN_INFO = 0x05030000, 241 MFI_DCMD_BBU_START_LEARN = 0x05040000, 242 MFI_DCMD_BBU_GET_PROP = 0x05050100, 243 MFI_DCMD_BBU_SET_PROP = 0x05050200, 244 MFI_DCMD_CLUSTER = 0x08000000, 245 MFI_DCMD_CLUSTER_RESET_ALL = 0x08010100, 246 MFI_DCMD_CLUSTER_RESET_LD = 0x08010200 247} mfi_dcmd_t; 248 249/* Modifiers for MFI_DCMD_CTRL_FLUSHCACHE */ 250#define MFI_FLUSHCACHE_CTRL 0x01 251#define MFI_FLUSHCACHE_DISK 0x02 252 253/* Modifiers for MFI_DCMD_CTRL_SHUTDOWN */ 254#define MFI_SHUTDOWN_SPINDOWN 0x01 255 256/* 257 * MFI Frame flags 258 */ 259#define MFI_FRAME_POST_IN_REPLY_QUEUE 0x0000 260#define MFI_FRAME_DONT_POST_IN_REPLY_QUEUE 0x0001 261#define MFI_FRAME_SGL32 0x0000 262#define MFI_FRAME_SGL64 0x0002 263#define MFI_FRAME_SENSE32 0x0000 264#define MFI_FRAME_SENSE64 0x0004 265#define MFI_FRAME_DIR_NONE 0x0000 266#define MFI_FRAME_DIR_WRITE 0x0008 267#define MFI_FRAME_DIR_READ 0x0010 268#define MFI_FRAME_DIR_BOTH 0x0018 269#define MFI_FRAME_IEEE_SGL 0x0020 270#define MFI_FRAME_FMT "\20" \ 271 "\1NOPOST" \ 272 "\2SGL64" \ 273 "\3SENSE64" \ 274 "\4WRITE" \ 275 "\5READ" \ 276 "\6IEEESGL" 277 278/* ThunderBolt Specific */ 279 280/* 281 * Pre-TB command size and TB command size. 282 * We will be checking it at the load time for the time being 283 */ 284#define MR_COMMAND_SIZE (MFI_FRAME_SIZE*20) /* 1280 bytes */ 285 286#define MEGASAS_THUNDERBOLT_MSG_ALLIGNMENT 256 287/* 288 * We are defining only 128 byte message to reduce memory move over head 289 * and also it will reduce the SRB extension size by 128byte compared with 290 * 256 message size 291 */ 292#define MEGASAS_THUNDERBOLT_NEW_MSG_SIZE 256 293#define MEGASAS_THUNDERBOLT_MAX_COMMANDS 1024 294#define MEGASAS_THUNDERBOLT_MAX_REPLY_COUNT 1024 295#define MEGASAS_THUNDERBOLT_REPLY_SIZE 8 296#define MEGASAS_THUNDERBOLT_MAX_CHAIN_COUNT 1 297#define MEGASAS_MAX_SZ_CHAIN_FRAME 1024 298 299#define MPI2_FUNCTION_PASSTHRU_IO_REQUEST 0xF0 300#define MPI2_FUNCTION_LD_IO_REQUEST 0xF1 301 302#define MR_INTERNAL_MFI_FRAMES_SMID 1 303#define MR_CTRL_EVENT_WAIT_SMID 2 304#define MR_INTERNAL_DRIVER_RESET_SMID 3 305 306 307/* MFI Status codes */ 308typedef enum { 309 MFI_STAT_OK = 0x00, 310 MFI_STAT_INVALID_CMD, 311 MFI_STAT_INVALID_DCMD, 312 MFI_STAT_INVALID_PARAMETER, 313 MFI_STAT_INVALID_SEQUENCE_NUMBER, 314 MFI_STAT_ABORT_NOT_POSSIBLE, 315 MFI_STAT_APP_HOST_CODE_NOT_FOUND, 316 MFI_STAT_APP_IN_USE, 317 MFI_STAT_APP_NOT_INITIALIZED, 318 MFI_STAT_ARRAY_INDEX_INVALID, 319 MFI_STAT_ARRAY_ROW_NOT_EMPTY, 320 MFI_STAT_CONFIG_RESOURCE_CONFLICT, 321 MFI_STAT_DEVICE_NOT_FOUND, 322 MFI_STAT_DRIVE_TOO_SMALL, 323 MFI_STAT_FLASH_ALLOC_FAIL, 324 MFI_STAT_FLASH_BUSY, 325 MFI_STAT_FLASH_ERROR = 0x10, 326 MFI_STAT_FLASH_IMAGE_BAD, 327 MFI_STAT_FLASH_IMAGE_INCOMPLETE, 328 MFI_STAT_FLASH_NOT_OPEN, 329 MFI_STAT_FLASH_NOT_STARTED, 330 MFI_STAT_FLUSH_FAILED, 331 MFI_STAT_HOST_CODE_NOT_FOUNT, 332 MFI_STAT_LD_CC_IN_PROGRESS, 333 MFI_STAT_LD_INIT_IN_PROGRESS, 334 MFI_STAT_LD_LBA_OUT_OF_RANGE, 335 MFI_STAT_LD_MAX_CONFIGURED, 336 MFI_STAT_LD_NOT_OPTIMAL, 337 MFI_STAT_LD_RBLD_IN_PROGRESS, 338 MFI_STAT_LD_RECON_IN_PROGRESS, 339 MFI_STAT_LD_WRONG_RAID_LEVEL, 340 MFI_STAT_MAX_SPARES_EXCEEDED, 341 MFI_STAT_MEMORY_NOT_AVAILABLE = 0x20, 342 MFI_STAT_MFC_HW_ERROR, 343 MFI_STAT_NO_HW_PRESENT, 344 MFI_STAT_NOT_FOUND, 345 MFI_STAT_NOT_IN_ENCL, 346 MFI_STAT_PD_CLEAR_IN_PROGRESS, 347 MFI_STAT_PD_TYPE_WRONG, 348 MFI_STAT_PR_DISABLED, 349 MFI_STAT_ROW_INDEX_INVALID, 350 MFI_STAT_SAS_CONFIG_INVALID_ACTION, 351 MFI_STAT_SAS_CONFIG_INVALID_DATA, 352 MFI_STAT_SAS_CONFIG_INVALID_PAGE, 353 MFI_STAT_SAS_CONFIG_INVALID_TYPE, 354 MFI_STAT_SCSI_DONE_WITH_ERROR, 355 MFI_STAT_SCSI_IO_FAILED, 356 MFI_STAT_SCSI_RESERVATION_CONFLICT, 357 MFI_STAT_SHUTDOWN_FAILED = 0x30, 358 MFI_STAT_TIME_NOT_SET, 359 MFI_STAT_WRONG_STATE, 360 MFI_STAT_LD_OFFLINE, 361 MFI_STAT_PEER_NOTIFICATION_REJECTED, 362 MFI_STAT_PEER_NOTIFICATION_FAILED, 363 MFI_STAT_RESERVATION_IN_PROGRESS, 364 MFI_STAT_I2C_ERRORS_DETECTED, 365 MFI_STAT_PCI_ERRORS_DETECTED, 366 MFI_STAT_DIAG_FAILED, 367 MFI_STAT_BOOT_MSG_PENDING, 368 MFI_STAT_FOREIGN_CONFIG_INCOMPLETE, 369 MFI_STAT_INVALID_STATUS = 0xFF 370} mfi_status_t; 371 372typedef enum { 373 MFI_EVT_CLASS_DEBUG = -2, 374 MFI_EVT_CLASS_PROGRESS = -1, 375 MFI_EVT_CLASS_INFO = 0, 376 MFI_EVT_CLASS_WARNING = 1, 377 MFI_EVT_CLASS_CRITICAL = 2, 378 MFI_EVT_CLASS_FATAL = 3, 379 MFI_EVT_CLASS_DEAD = 4 380} mfi_evt_class_t; 381 382typedef enum { 383 MFI_EVT_LOCALE_LD = 0x0001, 384 MFI_EVT_LOCALE_PD = 0x0002, 385 MFI_EVT_LOCALE_ENCL = 0x0004, 386 MFI_EVT_LOCALE_BBU = 0x0008, 387 MFI_EVT_LOCALE_SAS = 0x0010, 388 MFI_EVT_LOCALE_CTRL = 0x0020, 389 MFI_EVT_LOCALE_CONFIG = 0x0040, 390 MFI_EVT_LOCALE_CLUSTER = 0x0080, 391 MFI_EVT_LOCALE_ALL = 0xffff 392} mfi_evt_locale_t; 393 394typedef enum { 395 MR_EVT_ARGS_NONE = 0x00, 396 MR_EVT_ARGS_CDB_SENSE, 397 MR_EVT_ARGS_LD, 398 MR_EVT_ARGS_LD_COUNT, 399 MR_EVT_ARGS_LD_LBA, 400 MR_EVT_ARGS_LD_OWNER, 401 MR_EVT_ARGS_LD_LBA_PD_LBA, 402 MR_EVT_ARGS_LD_PROG, 403 MR_EVT_ARGS_LD_STATE, 404 MR_EVT_ARGS_LD_STRIP, 405 MR_EVT_ARGS_PD, 406 MR_EVT_ARGS_PD_ERR, 407 MR_EVT_ARGS_PD_LBA, 408 MR_EVT_ARGS_PD_LBA_LD, 409 MR_EVT_ARGS_PD_PROG, 410 MR_EVT_ARGS_PD_STATE, 411 MR_EVT_ARGS_PCI, 412 MR_EVT_ARGS_RATE, 413 MR_EVT_ARGS_STR, 414 MR_EVT_ARGS_TIME, 415 MR_EVT_ARGS_ECC 416} mfi_evt_args; 417 418#define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED 0x0152 419#define MR_EVT_PD_REMOVED 0x0070 420#define MR_EVT_PD_INSERTED 0x005b 421#define MR_EVT_LD_CHANGE 0x0051 422 423typedef enum { 424 MR_LD_CACHE_WRITE_BACK = 0x01, 425 MR_LD_CACHE_WRITE_ADAPTIVE = 0x02, 426 MR_LD_CACHE_READ_AHEAD = 0x04, 427 MR_LD_CACHE_READ_ADAPTIVE = 0x08, 428 MR_LD_CACHE_WRITE_CACHE_BAD_BBU=0x10, 429 MR_LD_CACHE_ALLOW_WRITE_CACHE = 0x20, 430 MR_LD_CACHE_ALLOW_READ_CACHE = 0x40 431} mfi_ld_cache; 432#define MR_LD_CACHE_MASK 0x7f 433 434#define MR_LD_CACHE_POLICY_READ_AHEAD_NONE 0 435#define MR_LD_CACHE_POLICY_READ_AHEAD_ALWAYS MR_LD_CACHE_READ_AHEAD 436#define MR_LD_CACHE_POLICY_READ_AHEAD_ADAPTIVE \ 437 (MR_LD_CACHE_READ_AHEAD | MR_LD_CACHE_READ_ADAPTIVE) 438#define MR_LD_CACHE_POLICY_WRITE_THROUGH 0 439#define MR_LD_CACHE_POLICY_WRITE_BACK MR_LD_CACHE_WRITE_BACK 440#define MR_LD_CACHE_POLICY_IO_CACHED \ 441 (MR_LD_CACHE_ALLOW_WRITE_CACHE | MR_LD_CACHE_ALLOW_READ_CACHE) 442#define MR_LD_CACHE_POLICY_IO_DIRECT 0 443 444typedef enum { 445 MR_PD_CACHE_UNCHANGED = 0, 446 MR_PD_CACHE_ENABLE = 1, 447 MR_PD_CACHE_DISABLE = 2 448} mfi_pd_cache; 449 450typedef enum { 451 MR_PD_QUERY_TYPE_ALL = 0, 452 MR_PD_QUERY_TYPE_STATE = 1, 453 MR_PD_QUERY_TYPE_POWER_STATE = 2, 454 MR_PD_QUERY_TYPE_MEDIA_TYPE = 3, 455 MR_PD_QUERY_TYPE_SPEED = 4, 456 MR_PD_QUERY_TYPE_EXPOSED_TO_HOST = 5 /*query for system drives */ 457} mfi_pd_query_type; 458 459/* 460 * Other propertities and definitions 461 */ 462#define MFI_MAX_PD_CHANNELS 2 463#define MFI_MAX_LD_CHANNELS 2 464#define MFI_MAX_CHANNELS (MFI_MAX_PD_CHANNELS + MFI_MAX_LD_CHANNELS) 465#define MFI_MAX_CHANNEL_DEVS 128 466#define MFI_DEFAULT_ID -1 467#define MFI_MAX_LUN 8 468#define MFI_MAX_LD 64 469#define MFI_MAX_PD 256 470 471#define MFI_FRAME_SIZE 64 472#define MFI_MBOX_SIZE 12 473 474/* Firmware flashing can take 50+ seconds */ 475#define MFI_POLL_TIMEOUT_SECS 60 476 477/* Allow for speedier math calculations */ 478#define MFI_SECTOR_LEN 512 479 480/* Scatter Gather elements */ 481struct mfi_sg32 { 482 uint32_t addr; 483 uint32_t len; 484} __packed; 485 486struct mfi_sg64 { 487 uint64_t addr; 488 uint32_t len; 489} __packed; 490 491struct mfi_sg_skinny { 492 uint64_t addr; 493 uint32_t len; 494 uint32_t flag; 495} __packed; 496 497union mfi_sgl { 498 struct mfi_sg32 sg32[1]; 499 struct mfi_sg64 sg64[1]; 500 struct mfi_sg_skinny sg_skinny[1]; 501} __packed; 502 503/* Message frames. All messages have a common header */ 504struct mfi_frame_header { 505 uint8_t cmd; 506 uint8_t sense_len; 507 uint8_t cmd_status; 508 uint8_t scsi_status; 509 uint8_t target_id; 510 uint8_t lun_id; 511 uint8_t cdb_len; 512 uint8_t sg_count; 513 uint32_t context; 514 /* 515 * pad0 is MSI Specific. Not used by Driver. Zero the value before 516 * sending the command to f/w. 517 */ 518 uint32_t pad0; 519 uint16_t flags; 520#define MFI_FRAME_DATAOUT 0x08 521#define MFI_FRAME_DATAIN 0x10 522 uint16_t timeout; 523 uint32_t data_len; 524} __packed; 525 526struct mfi_init_frame { 527 struct mfi_frame_header header; 528 uint32_t qinfo_new_addr_lo; 529 uint32_t qinfo_new_addr_hi; 530 uint32_t qinfo_old_addr_lo; 531 uint32_t qinfo_old_addr_hi; 532 // Start LSIP200113393 533 uint32_t driver_ver_lo; /*28h */ 534 uint32_t driver_ver_hi; /*2Ch */ 535 536 uint32_t reserved[4]; 537 // End LSIP200113393 538} __packed; 539 540/* 541 * Define MFI Address Context union. 542 */ 543#ifdef MFI_ADDRESS_IS_uint64_t 544 typedef uint64_t MFI_ADDRESS; 545#else 546 typedef union _MFI_ADDRESS { 547 struct { 548 uint32_t addressLow; 549 uint32_t addressHigh; 550 } u; 551 uint64_t address; 552 } MFI_ADDRESS, *PMFI_ADDRESS; 553#endif 554 555#define MFI_IO_FRAME_SIZE 40 556struct mfi_io_frame { 557 struct mfi_frame_header header; 558 uint32_t sense_addr_lo; 559 uint32_t sense_addr_hi; 560 uint32_t lba_lo; 561 uint32_t lba_hi; 562 union mfi_sgl sgl; 563} __packed; 564 565#define MFI_PASS_FRAME_SIZE 48 566struct mfi_pass_frame { 567 struct mfi_frame_header header; 568 uint32_t sense_addr_lo; 569 uint32_t sense_addr_hi; 570 uint8_t cdb[16]; 571 union mfi_sgl sgl; 572} __packed; 573 574#define MFI_DCMD_FRAME_SIZE 40 575struct mfi_dcmd_frame { 576 struct mfi_frame_header header; 577 uint32_t opcode; 578 uint8_t mbox[MFI_MBOX_SIZE]; 579 union mfi_sgl sgl; 580} __packed; 581 582struct mfi_abort_frame { 583 struct mfi_frame_header header; 584 uint32_t abort_context; 585 /* pad is changed to reserved.*/ 586 uint32_t reserved0; 587 uint32_t abort_mfi_addr_lo; 588 uint32_t abort_mfi_addr_hi; 589 uint32_t reserved1[6]; 590} __packed; 591 592struct mfi_smp_frame { 593 struct mfi_frame_header header; 594 uint64_t sas_addr; 595 union { 596 struct mfi_sg32 sg32[2]; 597 struct mfi_sg64 sg64[2]; 598 } sgl; 599} __packed; 600 601struct mfi_stp_frame { 602 struct mfi_frame_header header; 603 uint16_t fis[10]; 604 uint32_t stp_flags; 605 union { 606 struct mfi_sg32 sg32[2]; 607 struct mfi_sg64 sg64[2]; 608 } sgl; 609} __packed; 610 611union mfi_frame { 612 struct mfi_frame_header header; 613 struct mfi_init_frame init; 614 /* ThunderBolt Initialization */ 615 struct mfi_io_frame io; 616 struct mfi_pass_frame pass; 617 struct mfi_dcmd_frame dcmd; 618 struct mfi_abort_frame abort; 619 struct mfi_smp_frame smp; 620 struct mfi_stp_frame stp; 621 uint8_t bytes[MFI_FRAME_SIZE]; 622}; 623 624#define MFI_SENSE_LEN 128 625struct mfi_sense { 626 uint8_t data[MFI_SENSE_LEN]; 627}; 628 629/* The queue init structure that is passed with the init message */ 630struct mfi_init_qinfo { 631 uint32_t flags; 632 uint32_t rq_entries; 633 uint32_t rq_addr_lo; 634 uint32_t rq_addr_hi; 635 uint32_t pi_addr_lo; 636 uint32_t pi_addr_hi; 637 uint32_t ci_addr_lo; 638 uint32_t ci_addr_hi; 639} __packed; 640 641/* SAS (?) controller properties, part of mfi_ctrl_info */ 642struct mfi_ctrl_props { 643 uint16_t seq_num; 644 uint16_t pred_fail_poll_interval; 645 uint16_t intr_throttle_cnt; 646 uint16_t intr_throttle_timeout; 647 uint8_t rebuild_rate; 648 uint8_t patrol_read_rate; 649 uint8_t bgi_rate; 650 uint8_t cc_rate; 651 uint8_t recon_rate; 652 uint8_t cache_flush_interval; 653 uint8_t spinup_drv_cnt; 654 uint8_t spinup_delay; 655 uint8_t cluster_enable; 656 uint8_t coercion_mode; 657 uint8_t alarm_enable; 658 uint8_t disable_auto_rebuild; 659 uint8_t disable_battery_warn; 660 uint8_t ecc_bucket_size; 661 uint16_t ecc_bucket_leak_rate; 662 uint8_t restore_hotspare_on_insertion; 663 uint8_t expose_encl_devices; 664 uint8_t maintainPdFailHistory; 665 uint8_t disallowHostRequestReordering; 666 /* set TRUE to abort CC on detecting an inconsistency */ 667 uint8_t abortCCOnError; 668 /* load balance mode (MR_LOAD_BALANCE_MODE) */ 669 uint8_t loadBalanceMode; 670 /* 671 * 0 - use auto detect logic of backplanes like SGPIO, i2c SEP using 672 * h/w mechansim like GPIO pins 673 * 1 - disable auto detect SGPIO, 674 * 2 - disable i2c SEP auto detect 675 * 3 - disable both auto detect 676 */ 677 uint8_t disableAutoDetectBackplane; 678 /* 679 * % of source LD to be reserved for a VDs snapshot in snapshot 680 * repository, for metadata and user data: 1=5%, 2=10%, 3=15% and so on 681 */ 682 uint8_t snapVDSpace; 683 684 /* 685 * Add properties that can be controlled by a bit in the following 686 * structure. 687 */ 688 struct { 689 /* set TRUE to disable copyBack (0=copback enabled) */ 690 uint32_t copyBackDisabled :1; 691 uint32_t SMARTerEnabled :1; 692 uint32_t prCorrectUnconfiguredAreas :1; 693 uint32_t useFdeOnly :1; 694 uint32_t disableNCQ :1; 695 uint32_t SSDSMARTerEnabled :1; 696 uint32_t SSDPatrolReadEnabled :1; 697 uint32_t enableSpinDownUnconfigured :1; 698 uint32_t autoEnhancedImport :1; 699 uint32_t enableSecretKeyControl :1; 700 uint32_t disableOnlineCtrlReset :1; 701 uint32_t allowBootWithPinnedCache :1; 702 uint32_t disableSpinDownHS :1; 703 uint32_t enableJBOD :1; 704 uint32_t reserved :18; 705 } OnOffProperties; 706 /* 707 * % of source LD to be reserved for auto snapshot in snapshot 708 * repository, for metadata and user data: 1=5%, 2=10%, 3=15% and so on. 709 */ 710 uint8_t autoSnapVDSpace; 711 /* 712 * Snapshot writeable VIEWs capacity as a % of source LD capacity: 713 * 0=READ only, 1=5%, 2=10%, 3=15% and so on. 714 */ 715 uint8_t viewSpace; 716 /* # of idle minutes before device is spun down (0=use FW defaults) */ 717 uint16_t spinDownTime; 718 uint8_t reserved[24]; 719} __packed; 720 721/* PCI information about the card. */ 722struct mfi_info_pci { 723 uint16_t vendor; 724 uint16_t device; 725 uint16_t subvendor; 726 uint16_t subdevice; 727 uint8_t reserved[24]; 728} __packed; 729 730/* Host (front end) interface information */ 731struct mfi_info_host { 732 uint8_t type; 733#define MFI_INFO_HOST_PCIX 0x01 734#define MFI_INFO_HOST_PCIE 0x02 735#define MFI_INFO_HOST_ISCSI 0x04 736#define MFI_INFO_HOST_SAS3G 0x08 737 uint8_t reserved[6]; 738 uint8_t port_count; 739 uint64_t port_addr[8]; 740} __packed; 741 742/* Device (back end) interface information */ 743struct mfi_info_device { 744 uint8_t type; 745#define MFI_INFO_DEV_SPI 0x01 746#define MFI_INFO_DEV_SAS3G 0x02 747#define MFI_INFO_DEV_SATA1 0x04 748#define MFI_INFO_DEV_SATA3G 0x08 749 uint8_t reserved[6]; 750 uint8_t port_count; 751 uint64_t port_addr[8]; 752} __packed; 753 754/* Firmware component information */ 755struct mfi_info_component { 756 char name[8]; 757 char version[32]; 758 char build_date[16]; 759 char build_time[16]; 760} __packed; 761 762/* Controller default settings */ 763struct mfi_defaults { 764 uint64_t sas_addr; 765 uint8_t phy_polarity; 766 uint8_t background_rate; 767 uint8_t stripe_size; 768 uint8_t flush_time; 769 uint8_t write_back; 770 uint8_t read_ahead; 771 uint8_t cache_when_bbu_bad; 772 uint8_t cached_io; 773 uint8_t smart_mode; 774 uint8_t alarm_disable; 775 uint8_t coercion; 776 uint8_t zrc_config; 777 uint8_t dirty_led_shows_drive_activity; 778 uint8_t bios_continue_on_error; 779 uint8_t spindown_mode; 780 uint8_t allowed_device_types; 781 uint8_t allow_mix_in_enclosure; 782 uint8_t allow_mix_in_ld; 783 uint8_t allow_sata_in_cluster; 784 uint8_t max_chained_enclosures; 785 uint8_t disable_ctrl_r; 786 uint8_t enabel_web_bios; 787 uint8_t phy_polarity_split; 788 uint8_t direct_pd_mapping; 789 uint8_t bios_enumerate_lds; 790 uint8_t restored_hot_spare_on_insertion; 791 uint8_t expose_enclosure_devices; 792 uint8_t maintain_pd_fail_history; 793 uint8_t resv[28]; 794} __packed; 795 796/* Controller default settings */ 797struct mfi_bios_data { 798 uint16_t boot_target_id; 799 uint8_t do_not_int_13; 800 uint8_t continue_on_error; 801 uint8_t verbose; 802 uint8_t geometry; 803 uint8_t expose_all_drives; 804 uint8_t reserved[56]; 805 uint8_t check_sum; 806} __packed; 807 808/* SAS (?) controller info, returned from MFI_DCMD_CTRL_GETINFO. */ 809struct mfi_ctrl_info { 810 struct mfi_info_pci pci; 811 struct mfi_info_host host; 812 struct mfi_info_device device; 813 814 /* Firmware components that are present and active. */ 815 uint32_t image_check_word; 816 uint32_t image_component_count; 817 struct mfi_info_component image_component[8]; 818 819 /* Firmware components that have been flashed but are inactive */ 820 uint32_t pending_image_component_count; 821 struct mfi_info_component pending_image_component[8]; 822 823 uint8_t max_arms; 824 uint8_t max_spans; 825 uint8_t max_arrays; 826 uint8_t max_lds; 827 char product_name[80]; 828 char serial_number[32]; 829 uint32_t hw_present; 830#define MFI_INFO_HW_BBU 0x01 831#define MFI_INFO_HW_ALARM 0x02 832#define MFI_INFO_HW_NVRAM 0x04 833#define MFI_INFO_HW_UART 0x08 834 uint32_t current_fw_time; 835 uint16_t max_cmds; 836 uint16_t max_sg_elements; 837 uint32_t max_request_size; 838 uint16_t lds_present; 839 uint16_t lds_degraded; 840 uint16_t lds_offline; 841 uint16_t pd_present; 842 uint16_t pd_disks_present; 843 uint16_t pd_disks_pred_failure; 844 uint16_t pd_disks_failed; 845 uint16_t nvram_size; 846 uint16_t memory_size; 847 uint16_t flash_size; 848 uint16_t ram_correctable_errors; 849 uint16_t ram_uncorrectable_errors; 850 uint8_t cluster_allowed; 851 uint8_t cluster_active; 852 uint16_t max_strips_per_io; 853 854 uint32_t raid_levels; 855#define MFI_INFO_RAID_0 0x01 856#define MFI_INFO_RAID_1 0x02 857#define MFI_INFO_RAID_5 0x04 858#define MFI_INFO_RAID_1E 0x08 859#define MFI_INFO_RAID_6 0x10 860 861 uint32_t adapter_ops; 862#define MFI_INFO_AOPS_RBLD_RATE 0x0001 863#define MFI_INFO_AOPS_CC_RATE 0x0002 864#define MFI_INFO_AOPS_BGI_RATE 0x0004 865#define MFI_INFO_AOPS_RECON_RATE 0x0008 866#define MFI_INFO_AOPS_PATROL_RATE 0x0010 867#define MFI_INFO_AOPS_ALARM_CONTROL 0x0020 868#define MFI_INFO_AOPS_CLUSTER_SUPPORTED 0x0040 869#define MFI_INFO_AOPS_BBU 0x0080 870#define MFI_INFO_AOPS_SPANNING_ALLOWED 0x0100 871#define MFI_INFO_AOPS_DEDICATED_SPARES 0x0200 872#define MFI_INFO_AOPS_REVERTIBLE_SPARES 0x0400 873#define MFI_INFO_AOPS_FOREIGN_IMPORT 0x0800 874#define MFI_INFO_AOPS_SELF_DIAGNOSTIC 0x1000 875#define MFI_INFO_AOPS_MIXED_ARRAY 0x2000 876#define MFI_INFO_AOPS_GLOBAL_SPARES 0x4000 877 878 uint32_t ld_ops; 879#define MFI_INFO_LDOPS_READ_POLICY 0x01 880#define MFI_INFO_LDOPS_WRITE_POLICY 0x02 881#define MFI_INFO_LDOPS_IO_POLICY 0x04 882#define MFI_INFO_LDOPS_ACCESS_POLICY 0x08 883#define MFI_INFO_LDOPS_DISK_CACHE_POLICY 0x10 884 885 struct { 886 uint8_t min; 887 uint8_t max; 888 uint8_t reserved[2]; 889 } __packed stripe_sz_ops; 890 891 uint32_t pd_ops; 892#define MFI_INFO_PDOPS_FORCE_ONLINE 0x01 893#define MFI_INFO_PDOPS_FORCE_OFFLINE 0x02 894#define MFI_INFO_PDOPS_FORCE_REBUILD 0x04 895 896 uint32_t pd_mix_support; 897#define MFI_INFO_PDMIX_SAS 0x01 898#define MFI_INFO_PDMIX_SATA 0x02 899#define MFI_INFO_PDMIX_ENCL 0x04 900#define MFI_INFO_PDMIX_LD 0x08 901#define MFI_INFO_PDMIX_SATA_CLUSTER 0x10 902 903 uint8_t ecc_bucket_count; 904 uint8_t reserved2[11]; 905 struct mfi_ctrl_props properties; 906 char package_version[0x60]; 907 uint8_t pad[0x800 - 0x6a0]; 908} __packed; 909 910/* keep track of an event. */ 911union mfi_evt { 912 struct { 913 uint16_t locale; 914 uint8_t reserved; 915 int8_t evt_class; 916 } members; 917 uint32_t word; 918} __packed; 919 920/* event log state. */ 921struct mfi_evt_log_state { 922 uint32_t newest_seq_num; 923 uint32_t oldest_seq_num; 924 uint32_t clear_seq_num; 925 uint32_t shutdown_seq_num; 926 uint32_t boot_seq_num; 927} __packed; 928 929struct mfi_progress { 930 uint16_t progress; 931 uint16_t elapsed_seconds; 932} __packed; 933 934struct mfi_evt_ld { 935 uint16_t target_id; 936 uint8_t ld_index; 937 uint8_t reserved; 938} __packed; 939 940struct mfi_evt_pd { 941 uint16_t device_id; 942 uint8_t enclosure_index; 943 uint8_t slot_number; 944} __packed; 945 946/* SAS (?) event detail, returned from MFI_DCMD_CTRL_EVENT_WAIT. */ 947struct mfi_evt_detail { 948 uint32_t seq; 949 uint32_t time; 950 uint32_t code; 951 union mfi_evt evt_class; 952 uint8_t arg_type; 953 uint8_t reserved1[15]; 954 955 union { 956 struct { 957 struct mfi_evt_pd pd; 958 uint8_t cdb_len; 959 uint8_t sense_len; 960 uint8_t reserved[2]; 961 uint8_t cdb[16]; 962 uint8_t sense[64]; 963 } cdb_sense; 964 965 struct mfi_evt_ld ld; 966 967 struct { 968 struct mfi_evt_ld ld; 969 uint64_t count; 970 } ld_count; 971 972 struct { 973 uint64_t lba; 974 struct mfi_evt_ld ld; 975 } ld_lba; 976 977 struct { 978 struct mfi_evt_ld ld; 979 uint32_t pre_owner; 980 uint32_t new_owner; 981 } ld_owner; 982 983 struct { 984 uint64_t ld_lba; 985 uint64_t pd_lba; 986 struct mfi_evt_ld ld; 987 struct mfi_evt_pd pd; 988 } ld_lba_pd_lba; 989 990 struct { 991 struct mfi_evt_ld ld; 992 struct mfi_progress prog; 993 } ld_prog; 994 995 struct { 996 struct mfi_evt_ld ld; 997 uint32_t prev_state; 998 uint32_t new_state; 999 } ld_state; 1000 1001 struct { 1002 uint64_t strip; 1003 struct mfi_evt_ld ld; 1004 } ld_strip; 1005 1006 struct mfi_evt_pd pd; 1007 1008 struct { 1009 struct mfi_evt_pd pd; 1010 uint32_t err; 1011 } pd_err; 1012 1013 struct { 1014 uint64_t lba; 1015 struct mfi_evt_pd pd; 1016 } pd_lba; 1017 1018 struct { 1019 uint64_t lba; 1020 struct mfi_evt_pd pd; 1021 struct mfi_evt_ld ld; 1022 } pd_lba_ld; 1023 1024 struct { 1025 struct mfi_evt_pd pd; 1026 struct mfi_progress prog; 1027 } pd_prog; 1028 1029 struct { 1030 struct mfi_evt_pd ld; 1031 uint32_t prev_state; 1032 uint32_t new_state; 1033 } pd_state; 1034 1035 struct { 1036 uint16_t venderId; 1037 uint16_t deviceId; 1038 uint16_t subVenderId; 1039 uint16_t subDeviceId; 1040 } pci; 1041 1042 uint32_t rate; 1043 1044 char str[96]; 1045 1046 struct { 1047 uint32_t rtc; 1048 uint16_t elapsedSeconds; 1049 } time; 1050 1051 struct { 1052 uint32_t ecar; 1053 uint32_t elog; 1054 char str[64]; 1055 } ecc; 1056 1057 uint8_t b[96]; 1058 uint16_t s[48]; 1059 uint32_t w[24]; 1060 uint64_t d[12]; 1061 } args; 1062 1063 char description[128]; 1064} __packed; 1065 1066struct mfi_evt_list { 1067 uint32_t count; 1068 uint32_t reserved; 1069 struct mfi_evt_detail event[1]; 1070} __packed; 1071 1072union mfi_pd_ref { 1073 struct { 1074 uint16_t device_id; 1075 uint16_t seq_num; 1076 } v; 1077 uint32_t ref; 1078} __packed; 1079 1080union mfi_pd_ddf_type { 1081 struct { 1082 union { 1083 struct { 1084 uint16_t forced_pd_guid : 1; 1085 uint16_t in_vd : 1; 1086 uint16_t is_global_spare : 1; 1087 uint16_t is_spare : 1; 1088 uint16_t is_foreign : 1; 1089 uint16_t reserved : 7; 1090 uint16_t intf : 4; 1091 } pd_type; 1092 uint16_t type; 1093 } v; 1094 uint16_t reserved; 1095 } ddf; 1096 struct { 1097 uint32_t reserved; 1098 } non_disk; 1099 uint32_t type; 1100} __packed; 1101 1102struct mfi_pd_progress { 1103 uint32_t active; 1104#define MFI_PD_PROGRESS_REBUILD (1<<0) 1105#define MFI_PD_PROGRESS_PATROL (1<<1) 1106#define MFI_PD_PROGRESS_CLEAR (1<<2) 1107 struct mfi_progress rbld; 1108 struct mfi_progress patrol; 1109 struct mfi_progress clear; 1110 struct mfi_progress reserved[4]; 1111} __packed; 1112 1113struct mfi_pd_info { 1114 union mfi_pd_ref ref; 1115 uint8_t inquiry_data[96]; 1116 uint8_t vpd_page83[64]; 1117 uint8_t not_supported; 1118 uint8_t scsi_dev_type; 1119 uint8_t connected_port_bitmap; 1120 uint8_t device_speed; 1121 uint32_t media_err_count; 1122 uint32_t other_err_count; 1123 uint32_t pred_fail_count; 1124 uint32_t last_pred_fail_event_seq_num; 1125 uint16_t fw_state; /* MFI_PD_STATE_* */ 1126 uint8_t disabled_for_removal; 1127 uint8_t link_speed; 1128 union mfi_pd_ddf_type state; 1129 struct { 1130 uint8_t count; 1131 uint8_t is_path_broken; 1132 uint8_t reserved[6]; 1133 uint64_t sas_addr[4]; 1134 } path_info; 1135 uint64_t raw_size; 1136 uint64_t non_coerced_size; 1137 uint64_t coerced_size; 1138 uint16_t encl_device_id; 1139 uint8_t encl_index; 1140 uint8_t slot_number; 1141 struct mfi_pd_progress prog_info; 1142 uint8_t bad_block_table_full; 1143 uint8_t unusable_in_current_config; 1144 uint8_t vpd_page83_ext[64]; 1145 uint8_t reserved[512-358]; 1146} __packed; 1147 1148struct mfi_pd_address { 1149 uint16_t device_id; 1150 uint16_t encl_device_id; 1151 uint8_t encl_index; 1152 uint8_t slot_number; 1153 uint8_t scsi_dev_type; /* 0 = disk */ 1154 uint8_t connect_port_bitmap; 1155 uint64_t sas_addr[2]; 1156} __packed; 1157 1158#define MAX_SYS_PDS 240 1159struct mfi_pd_list { 1160 uint32_t size; 1161 uint32_t count; 1162 struct mfi_pd_address addr[MAX_SYS_PDS]; 1163} __packed; 1164 1165enum mfi_pd_state { 1166 MFI_PD_STATE_UNCONFIGURED_GOOD = 0x00, 1167 MFI_PD_STATE_UNCONFIGURED_BAD = 0x01, 1168 MFI_PD_STATE_HOT_SPARE = 0x02, 1169 MFI_PD_STATE_OFFLINE = 0x10, 1170 MFI_PD_STATE_FAILED = 0x11, 1171 MFI_PD_STATE_REBUILD = 0x14, 1172 MFI_PD_STATE_ONLINE = 0x18, 1173 MFI_PD_STATE_COPYBACK = 0x20, 1174 MFI_PD_STATE_SYSTEM = 0x40 1175}; 1176 1177/* 1178 * "SYSTEM" disk appears to be "JBOD" support from the RAID controller. 1179 * Adding a #define to denote this. 1180 */ 1181#define MFI_PD_STATE_JBOD MFI_PD_STATE_SYSTEM 1182 1183union mfi_ld_ref { 1184 struct { 1185 uint8_t target_id; 1186 uint8_t reserved; 1187 uint16_t seq; 1188 } v; 1189 uint32_t ref; 1190} __packed; 1191 1192struct mfi_ld_list { 1193 uint32_t ld_count; 1194 uint32_t reserved1; 1195 struct { 1196 union mfi_ld_ref ld; 1197 uint8_t state; 1198 uint8_t reserved2[3]; 1199 uint64_t size; 1200 } ld_list[MFI_MAX_LD]; 1201} __packed; 1202 1203enum mfi_ld_access { 1204 MFI_LD_ACCESS_RW = 0, 1205 MFI_LD_ACCSSS_RO = 2, 1206 MFI_LD_ACCESS_BLOCKED = 3, 1207}; 1208#define MFI_LD_ACCESS_MASK 3 1209 1210enum mfi_ld_state { 1211 MFI_LD_STATE_OFFLINE = 0, 1212 MFI_LD_STATE_PARTIALLY_DEGRADED = 1, 1213 MFI_LD_STATE_DEGRADED = 2, 1214 MFI_LD_STATE_OPTIMAL = 3 1215}; 1216 1217struct mfi_ld_props { 1218 union mfi_ld_ref ld; 1219 char name[16]; 1220 uint8_t default_cache_policy; 1221 uint8_t access_policy; 1222 uint8_t disk_cache_policy; 1223 uint8_t current_cache_policy; 1224 uint8_t no_bgi; 1225 uint8_t reserved[7]; 1226} __packed; 1227 1228struct mfi_ld_params { 1229 uint8_t primary_raid_level; 1230 uint8_t raid_level_qualifier; 1231 uint8_t secondary_raid_level; 1232 uint8_t stripe_size; 1233 uint8_t num_drives; 1234 uint8_t span_depth; 1235 uint8_t state; 1236 uint8_t init_state; 1237#define MFI_LD_PARAMS_INIT_NO 0 1238#define MFI_LD_PARAMS_INIT_QUICK 1 1239#define MFI_LD_PARAMS_INIT_FULL 2 1240 uint8_t is_consistent; 1241 uint8_t reserved1[6]; 1242 uint8_t isSSCD; 1243 uint8_t reserved2[16]; 1244} __packed; 1245 1246struct mfi_ld_progress { 1247 uint32_t active; 1248#define MFI_LD_PROGRESS_CC (1<<0) 1249#define MFI_LD_PROGRESS_BGI (1<<1) 1250#define MFI_LD_PROGRESS_FGI (1<<2) 1251#define MFI_LD_PROGRESS_RECON (1<<3) 1252 struct mfi_progress cc; 1253 struct mfi_progress bgi; 1254 struct mfi_progress fgi; 1255 struct mfi_progress recon; 1256 struct mfi_progress reserved[4]; 1257} __packed; 1258 1259struct mfi_span { 1260 uint64_t start_block; 1261 uint64_t num_blocks; 1262 uint16_t array_ref; 1263 uint8_t reserved[6]; 1264} __packed; 1265 1266#define MFI_MAX_SPAN_DEPTH 8 1267struct mfi_ld_config { 1268 struct mfi_ld_props properties; 1269 struct mfi_ld_params params; 1270 struct mfi_span span[MFI_MAX_SPAN_DEPTH]; 1271} __packed; 1272 1273struct mfi_ld_info { 1274 struct mfi_ld_config ld_config; 1275 uint64_t size; 1276 struct mfi_ld_progress progress; 1277 uint16_t cluster_owner; 1278 uint8_t reconstruct_active; 1279 uint8_t reserved1[1]; 1280 uint8_t vpd_page83[64]; 1281 uint8_t reserved2[16]; 1282} __packed; 1283 1284#define MFI_MAX_ARRAYS 16 1285struct mfi_spare { 1286 union mfi_pd_ref ref; 1287 uint8_t spare_type; 1288#define MFI_SPARE_DEDICATED (1 << 0) 1289#define MFI_SPARE_REVERTIBLE (1 << 1) 1290#define MFI_SPARE_ENCL_AFFINITY (1 << 2) 1291 uint8_t reserved[2]; 1292 uint8_t array_count; 1293 uint16_t array_ref[MFI_MAX_ARRAYS]; 1294} __packed; 1295 1296#define MFI_MAX_ROW_SIZE 32 1297struct mfi_array { 1298 uint64_t size; 1299 uint8_t num_drives; 1300 uint8_t reserved; 1301 uint16_t array_ref; 1302 uint8_t pad[20]; 1303 struct { 1304 union mfi_pd_ref ref; /* 0xffff == missing drive */ 1305 uint16_t fw_state; /* MFI_PD_STATE_* */ 1306 struct { 1307 uint8_t pd; 1308 uint8_t slot; 1309 } encl; 1310 } pd[MFI_MAX_ROW_SIZE]; 1311} __packed; 1312 1313struct mfi_config_data { 1314 uint32_t size; 1315 uint16_t array_count; 1316 uint16_t array_size; 1317 uint16_t log_drv_count; 1318 uint16_t log_drv_size; 1319 uint16_t spares_count; 1320 uint16_t spares_size; 1321 uint8_t reserved[16]; 1322 struct mfi_array array[0]; 1323 struct mfi_ld_config ld[0]; 1324 struct mfi_spare spare[0]; 1325} __packed; 1326 1327struct mfi_bbu_capacity_info { 1328 uint16_t relative_charge; 1329 uint16_t absolute_charge; 1330 uint16_t remaining_capacity; 1331 uint16_t full_charge_capacity; 1332 uint16_t run_time_to_empty; 1333 uint16_t average_time_to_empty; 1334 uint16_t average_time_to_full; 1335 uint16_t cycle_count; 1336 uint16_t max_error; 1337 uint16_t remaining_capacity_alarm; 1338 uint16_t remaining_time_alarm; 1339 uint8_t reserved[26]; 1340} __packed; 1341 1342struct mfi_bbu_design_info { 1343 uint32_t mfg_date; 1344 uint16_t design_capacity; 1345 uint16_t design_voltage; 1346 uint16_t spec_info; 1347 uint16_t serial_number; 1348 uint16_t pack_stat_config; 1349 uint8_t mfg_name[12]; 1350 uint8_t device_name[8]; 1351 uint8_t device_chemistry[8]; 1352 uint8_t mfg_data[8]; 1353 uint8_t reserved[17]; 1354} __packed; 1355 1356struct mfi_ibbu_state { 1357 uint16_t gas_guage_status; 1358 uint16_t relative_charge; 1359 uint16_t charger_system_state; 1360 uint16_t charger_system_ctrl; 1361 uint16_t charging_current; 1362 uint16_t absolute_charge; 1363 uint16_t max_error; 1364 uint8_t reserved[18]; 1365} __packed; 1366 1367struct mfi_bbu_state { 1368 uint16_t gas_guage_status; 1369 uint16_t relative_charge; 1370 uint16_t charger_status; 1371 uint16_t remaining_capacity; 1372 uint16_t full_charge_capacity; 1373 uint8_t is_SOH_good; 1374 uint8_t reserved[21]; 1375} __packed; 1376 1377struct mfi_bbu_properties { 1378 uint32_t auto_learn_period; 1379 uint32_t next_learn_time; 1380 uint8_t learn_delay_interval; 1381 uint8_t auto_learn_mode; 1382 uint8_t bbu_mode; 1383 uint8_t reserved[21]; 1384} __packed; 1385 1386union mfi_bbu_status_detail { 1387 struct mfi_ibbu_state ibbu; 1388 struct mfi_bbu_state bbu; 1389}; 1390 1391struct mfi_bbu_status { 1392 uint8_t battery_type; 1393#define MFI_BBU_TYPE_NONE 0 1394#define MFI_BBU_TYPE_IBBU 1 1395#define MFI_BBU_TYPE_BBU 2 1396 uint8_t reserved; 1397 uint16_t voltage; 1398 int16_t current; 1399 uint16_t temperature; 1400 uint32_t fw_status; 1401#define MFI_BBU_STATE_PACK_MISSING (1 << 0) 1402#define MFI_BBU_STATE_VOLTAGE_LOW (1 << 1) 1403#define MFI_BBU_STATE_TEMPERATURE_HIGH (1 << 2) 1404#define MFI_BBU_STATE_CHARGE_ACTIVE (1 << 3) 1405#define MFI_BBU_STATE_DISCHARGE_ACTIVE (1 << 4) 1406#define MFI_BBU_STATE_LEARN_CYC_REQ (1 << 5) 1407#define MFI_BBU_STATE_LEARN_CYC_ACTIVE (1 << 6) 1408#define MFI_BBU_STATE_LEARN_CYC_FAIL (1 << 7) 1409#define MFI_BBU_STATE_LEARN_CYC_TIMEOUT (1 << 8) 1410#define MFI_BBU_STATE_I2C_ERR_DETECT (1 << 9) 1411 uint8_t pad[20]; 1412 union mfi_bbu_status_detail detail; 1413} __packed; 1414 1415enum mfi_pr_state { 1416 MFI_PR_STATE_STOPPED = 0, 1417 MFI_PR_STATE_READY = 1, 1418 MFI_PR_STATE_ACTIVE = 2, 1419 MFI_PR_STATE_ABORTED = 0xff 1420}; 1421 1422struct mfi_pr_status { 1423 uint32_t num_iteration; 1424 uint8_t state; 1425 uint8_t num_pd_done; 1426 uint8_t reserved[10]; 1427}; 1428 1429enum mfi_pr_opmode { 1430 MFI_PR_OPMODE_AUTO = 0, 1431 MFI_PR_OPMODE_MANUAL = 1, 1432 MFI_PR_OPMODE_DISABLED = 2 1433}; 1434 1435struct mfi_pr_properties { 1436 uint8_t op_mode; 1437 uint8_t max_pd; 1438 uint8_t reserved; 1439 uint8_t exclude_ld_count; 1440 uint16_t excluded_ld[MFI_MAX_LD]; 1441 uint8_t cur_pd_map[MFI_MAX_PD / 8]; 1442 uint8_t last_pd_map[MFI_MAX_PD / 8]; 1443 uint32_t next_exec; 1444 uint32_t exec_freq; 1445 uint32_t clear_freq; 1446}; 1447 1448/* ThunderBolt support */ 1449 1450/* 1451 * Raid Context structure which describes MegaRAID specific IO Paramenters 1452 * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames 1453 */ 1454typedef struct _MPI2_SCSI_IO_VENDOR_UNIQUE { 1455 uint16_t resvd0; /* 0x00 - 0x01 */ 1456 uint16_t timeoutValue; /* 0x02 - 0x03 */ 1457 uint8_t regLockFlags; 1458 uint8_t armId; 1459 uint16_t TargetID; /* 0x06 - 0x07 */ 1460 1461 uint64_t RegLockLBA; /* 0x08 - 0x0F */ 1462 1463 uint32_t RegLockLength; /* 0x10 - 0x13 */ 1464 1465 uint16_t SMID; /* 0x14 - 0x15 nextLMId */ 1466 uint8_t exStatus; /* 0x16 */ 1467 uint8_t Status; /* 0x17 status */ 1468 1469 uint8_t RAIDFlags; /* 0x18 */ 1470 uint8_t numSGE; /* 0x19 numSge */ 1471 uint16_t configSeqNum; /* 0x1A - 0x1B */ 1472 uint8_t spanArm; /* 0x1C */ 1473 uint8_t resvd2[3]; /* 0x1D - 0x1F */ 1474} MPI2_SCSI_IO_VENDOR_UNIQUE, MPI25_SCSI_IO_VENDOR_UNIQUE; 1475 1476/***************************************************************************** 1477* 1478* Message Functions 1479* 1480*****************************************************************************/ 1481 1482#define NA_MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */ 1483#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */ 1484#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */ 1485#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */ 1486#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */ 1487#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */ 1488#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */ 1489#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */ 1490#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */ 1491#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */ 1492#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */ 1493#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */ 1494#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */ 1495#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */ 1496#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */ 1497#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */ 1498#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */ 1499#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */ 1500#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */ 1501#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ 1502#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */ 1503#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */ 1504#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ 1505#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */ 1506#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */ 1507#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator */ 1508#define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) /* Host Based Discovery Action */ 1509#define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) /* Power Management Control */ 1510#define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* beginning of product-specific range */ 1511#define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) /* end of product-specific range */ 1512 1513/* Doorbell functions */ 1514#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) 1515#define MPI2_FUNCTION_HANDSHAKE (0x42) 1516 1517/***************************************************************************** 1518* 1519* MPI Version Definitions 1520* 1521*****************************************************************************/ 1522 1523#define MPI2_VERSION_MAJOR (0x02) 1524#define MPI2_VERSION_MINOR (0x00) 1525#define MPI2_VERSION_MAJOR_MASK (0xFF00) 1526#define MPI2_VERSION_MAJOR_SHIFT (8) 1527#define MPI2_VERSION_MINOR_MASK (0x00FF) 1528#define MPI2_VERSION_MINOR_SHIFT (0) 1529#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ 1530 MPI2_VERSION_MINOR) 1531 1532#define MPI2_VERSION_02_00 (0x0200) 1533 1534/* versioning for this MPI header set */ 1535#define MPI2_HEADER_VERSION_UNIT (0x10) 1536#define MPI2_HEADER_VERSION_DEV (0x00) 1537#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) 1538#define MPI2_HEADER_VERSION_UNIT_SHIFT (8) 1539#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF) 1540#define MPI2_HEADER_VERSION_DEV_SHIFT (0) 1541#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \ 1542 MPI2_HEADER_VERSION_DEV) 1543 1544 1545/* IOCInit Request message */ 1546struct MPI2_IOC_INIT_REQUEST { 1547 uint8_t WhoInit; /* 0x00 */ 1548 uint8_t Reserved1; /* 0x01 */ 1549 uint8_t ChainOffset; /* 0x02 */ 1550 uint8_t Function; /* 0x03 */ 1551 uint16_t Reserved2; /* 0x04 */ 1552 uint8_t Reserved3; /* 0x06 */ 1553 uint8_t MsgFlags; /* 0x07 */ 1554 uint8_t VP_ID; /* 0x08 */ 1555 uint8_t VF_ID; /* 0x09 */ 1556 uint16_t Reserved4; /* 0x0A */ 1557 uint16_t MsgVersion; /* 0x0C */ 1558 uint16_t HeaderVersion; /* 0x0E */ 1559 uint32_t Reserved5; /* 0x10 */ 1560 uint16_t Reserved6; /* 0x14 */ 1561 uint8_t Reserved7; /* 0x16 */ 1562 uint8_t HostMSIxVectors; /* 0x17 */ 1563 uint16_t Reserved8; /* 0x18 */ 1564 uint16_t SystemRequestFrameSize; /* 0x1A */ 1565 uint16_t ReplyDescriptorPostQueueDepth; /* 0x1C */ 1566 uint16_t ReplyFreeQueueDepth; /* 0x1E */ 1567 uint32_t SenseBufferAddressHigh; /* 0x20 */ 1568 uint32_t SystemReplyAddressHigh; /* 0x24 */ 1569 uint64_t SystemRequestFrameBaseAddress; /* 0x28 */ 1570 uint64_t ReplyDescriptorPostQueueAddress;/* 0x30 */ 1571 uint64_t ReplyFreeQueueAddress; /* 0x38 */ 1572 uint64_t TimeStamp; /* 0x40 */ 1573}; 1574 1575/* WhoInit values */ 1576#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) 1577#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) 1578#define MPI2_WHOINIT_ROM_BIOS (0x02) 1579#define MPI2_WHOINIT_PCI_PEER (0x03) 1580#define MPI2_WHOINIT_HOST_DRIVER (0x04) 1581#define MPI2_WHOINIT_MANUFACTURER (0x05) 1582 1583struct MPI2_SGE_CHAIN_UNION { 1584 uint16_t Length; 1585 uint8_t NextChainOffset; 1586 uint8_t Flags; 1587 union { 1588 uint32_t Address32; 1589 uint64_t Address64; 1590 } u; 1591}; 1592 1593struct MPI2_IEEE_SGE_SIMPLE32 { 1594 uint32_t Address; 1595 uint32_t FlagsLength; 1596}; 1597 1598struct MPI2_IEEE_SGE_SIMPLE64 { 1599 uint64_t Address; 1600 uint32_t Length; 1601 uint16_t Reserved1; 1602 uint8_t Reserved2; 1603 uint8_t Flags; 1604}; 1605 1606typedef union _MPI2_IEEE_SGE_SIMPLE_UNION { 1607 struct MPI2_IEEE_SGE_SIMPLE32 Simple32; 1608 struct MPI2_IEEE_SGE_SIMPLE64 Simple64; 1609} MPI2_IEEE_SGE_SIMPLE_UNION; 1610 1611typedef struct _MPI2_SGE_SIMPLE_UNION { 1612 uint32_t FlagsLength; 1613 union { 1614 uint32_t Address32; 1615 uint64_t Address64; 1616 } u; 1617} MPI2_SGE_SIMPLE_UNION; 1618 1619/**************************************************************************** 1620* IEEE SGE field definitions and masks 1621****************************************************************************/ 1622 1623/* Flags field bit definitions */ 1624 1625#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80) 1626 1627#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24) 1628 1629#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF) 1630 1631/* Element Type */ 1632 1633#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) 1634#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) 1635 1636/* Data Location Address Space */ 1637 1638#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) 1639#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) 1640#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) 1641#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) 1642#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) 1643 1644/* Address Size */ 1645 1646#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) 1647#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02) 1648 1649/*******************/ 1650/* SCSI IO Control bits */ 1651#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) 1652#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) 1653 1654#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) 1655#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) 1656#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) 1657#define MPI2_SCSIIO_CONTROL_READ (0x02000000) 1658#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) 1659 1660#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) 1661#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) 1662 1663#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) 1664#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) 1665#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) 1666#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) 1667#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) 1668 1669#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) 1670#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) 1671#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) 1672#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) 1673 1674/*******************/ 1675 1676typedef struct { 1677 uint8_t CDB[20]; /* 0x00 */ 1678 uint32_t PrimaryReferenceTag; /* 0x14 */ 1679 uint16_t PrimaryApplicationTag; /* 0x18 */ 1680 uint16_t PrimaryApplicationTagMask; /* 0x1A */ 1681 uint32_t TransferLength; /* 0x1C */ 1682} MPI2_SCSI_IO_CDB_EEDP32; 1683 1684 1685typedef union _MPI2_IEEE_SGE_CHAIN_UNION { 1686 struct MPI2_IEEE_SGE_SIMPLE32 Chain32; 1687 struct MPI2_IEEE_SGE_SIMPLE64 Chain64; 1688} MPI2_IEEE_SGE_CHAIN_UNION; 1689 1690typedef union _MPI2_SIMPLE_SGE_UNION { 1691 MPI2_SGE_SIMPLE_UNION MpiSimple; 1692 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; 1693} MPI2_SIMPLE_SGE_UNION; 1694 1695typedef union _MPI2_SGE_IO_UNION { 1696 MPI2_SGE_SIMPLE_UNION MpiSimple; 1697 struct MPI2_SGE_CHAIN_UNION MpiChain; 1698 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; 1699 MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; 1700} MPI2_SGE_IO_UNION; 1701 1702typedef union { 1703 uint8_t CDB32[32]; 1704 MPI2_SCSI_IO_CDB_EEDP32 EEDP32; 1705 MPI2_SGE_SIMPLE_UNION SGE; 1706} MPI2_SCSI_IO_CDB_UNION; 1707 1708 1709/* MPI 2.5 SGLs */ 1710 1711#define MPI25_IEEE_SGE_FLAGS_END_OF_LIST (0x40) 1712 1713typedef struct _MPI25_IEEE_SGE_CHAIN64 { 1714 uint64_t Address; 1715 uint32_t Length; 1716 uint16_t Reserved1; 1717 uint8_t NextChainOffset; 1718 uint8_t Flags; 1719} MPI25_IEEE_SGE_CHAIN64, *pMpi25IeeeSgeChain64_t; 1720 1721/* use MPI2_IEEE_SGE_FLAGS_ defines for the Flags field */ 1722 1723 1724/********/ 1725 1726/* 1727 * RAID SCSI IO Request Message 1728 * Total SGE count will be one less than _MPI2_SCSI_IO_REQUEST 1729 */ 1730struct mfi_mpi2_request_raid_scsi_io { 1731 uint16_t DevHandle; /* 0x00 */ 1732 uint8_t ChainOffset; /* 0x02 */ 1733 uint8_t Function; /* 0x03 */ 1734 uint16_t Reserved1; /* 0x04 */ 1735 uint8_t Reserved2; /* 0x06 */ 1736 uint8_t MsgFlags; /* 0x07 */ 1737 uint8_t VP_ID; /* 0x08 */ 1738 uint8_t VF_ID; /* 0x09 */ 1739 uint16_t Reserved3; /* 0x0A */ 1740 uint32_t SenseBufferLowAddress; /* 0x0C */ 1741 uint16_t SGLFlags; /* 0x10 */ 1742 uint8_t SenseBufferLength; /* 0x12 */ 1743 uint8_t Reserved4; /* 0x13 */ 1744 uint8_t SGLOffset0; /* 0x14 */ 1745 uint8_t SGLOffset1; /* 0x15 */ 1746 uint8_t SGLOffset2; /* 0x16 */ 1747 uint8_t SGLOffset3; /* 0x17 */ 1748 uint32_t SkipCount; /* 0x18 */ 1749 uint32_t DataLength; /* 0x1C */ 1750 uint32_t BidirectionalDataLength; /* 0x20 */ 1751 uint16_t IoFlags; /* 0x24 */ 1752 uint16_t EEDPFlags; /* 0x26 */ 1753 uint32_t EEDPBlockSize; /* 0x28 */ 1754 uint32_t SecondaryReferenceTag; /* 0x2C */ 1755 uint16_t SecondaryApplicationTag; /* 0x30 */ 1756 uint16_t ApplicationTagTranslationMask; /* 0x32 */ 1757 uint8_t LUN[8]; /* 0x34 */ 1758 uint32_t Control; /* 0x3C */ 1759 MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ 1760 MPI2_SCSI_IO_VENDOR_UNIQUE RaidContext; /* 0x60 */ 1761 MPI2_SGE_IO_UNION SGL; /* 0x80 */ 1762} __packed; 1763 1764/* 1765 * MPT RAID MFA IO Descriptor. 1766 */ 1767typedef struct _MFI_RAID_MFA_IO_DESCRIPTOR { 1768 uint32_t RequestFlags : 8; 1769 uint32_t MessageAddress1 : 24; /* bits 31:8*/ 1770 uint32_t MessageAddress2; /* bits 61:32 */ 1771} MFI_RAID_MFA_IO_REQUEST_DESCRIPTOR,*PMFI_RAID_MFA_IO_REQUEST_DESCRIPTOR; 1772 1773struct mfi_mpi2_request_header { 1774 uint8_t RequestFlags; /* 0x00 */ 1775 uint8_t MSIxIndex; /* 0x01 */ 1776 uint16_t SMID; /* 0x02 */ 1777 uint16_t LMID; /* 0x04 */ 1778}; 1779 1780/* defines for the RequestFlags field */ 1781#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E) 1782#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) 1783#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) 1784#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) 1785#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) 1786#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A) 1787 1788#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) 1789 1790struct mfi_mpi2_request_high_priority { 1791 struct mfi_mpi2_request_header header; 1792 uint16_t reserved; 1793}; 1794 1795struct mfi_mpi2_request_scsi_io { 1796 struct mfi_mpi2_request_header header; 1797 uint16_t scsi_io_dev_handle; 1798}; 1799 1800struct mfi_mpi2_request_scsi_target { 1801 struct mfi_mpi2_request_header header; 1802 uint16_t scsi_target_io_index; 1803}; 1804 1805/* Request Descriptors */ 1806union mfi_mpi2_request_descriptor { 1807 struct mfi_mpi2_request_header header; 1808 struct mfi_mpi2_request_high_priority high_priority; 1809 struct mfi_mpi2_request_scsi_io scsi_io; 1810 struct mfi_mpi2_request_scsi_target scsi_target; 1811 uint64_t words; 1812}; 1813 1814 1815struct mfi_mpi2_reply_header { 1816 uint8_t ReplyFlags; /* 0x00 */ 1817 uint8_t MSIxIndex; /* 0x01 */ 1818 uint16_t SMID; /* 0x02 */ 1819}; 1820 1821/* defines for the ReplyFlags field */ 1822#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) 1823#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) 1824#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) 1825#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) 1826#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) 1827#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05) 1828#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) 1829 1830/* values for marking a reply descriptor as unused */ 1831#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) 1832#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF) 1833 1834struct mfi_mpi2_reply_default { 1835 struct mfi_mpi2_reply_header header; 1836 uint32_t DescriptorTypeDependent2; 1837}; 1838 1839struct mfi_mpi2_reply_address { 1840 struct mfi_mpi2_reply_header header; 1841 uint32_t ReplyFrameAddress; 1842}; 1843 1844struct mfi_mpi2_reply_scsi_io { 1845 struct mfi_mpi2_reply_header header; 1846 uint16_t TaskTag; /* 0x04 */ 1847 uint16_t Reserved1; /* 0x06 */ 1848}; 1849 1850struct mfi_mpi2_reply_target_assist { 1851 struct mfi_mpi2_reply_header header; 1852 uint8_t SequenceNumber; /* 0x04 */ 1853 uint8_t Reserved1; /* 0x04 */ 1854 uint16_t IoIndex; /* 0x06 */ 1855}; 1856 1857struct mfi_mpi2_reply_target_cmd_buffer { 1858 struct mfi_mpi2_reply_header header; 1859 uint8_t SequenceNumber; /* 0x04 */ 1860 uint8_t Flags; /* 0x04 */ 1861 uint16_t InitiatorDevHandle; /* 0x06 */ 1862 uint16_t IoIndex; /* 0x06 */ 1863}; 1864 1865struct mfi_mpi2_reply_raid_accel { 1866 struct mfi_mpi2_reply_header header; 1867 uint8_t SequenceNumber; /* 0x04 */ 1868 uint32_t Reserved; /* 0x04 */ 1869}; 1870 1871/* union of Reply Descriptors */ 1872union mfi_mpi2_reply_descriptor { 1873 struct mfi_mpi2_reply_header header; 1874 struct mfi_mpi2_reply_scsi_io scsi_io; 1875 struct mfi_mpi2_reply_target_assist target_assist; 1876 struct mfi_mpi2_reply_target_cmd_buffer target_cmd; 1877 struct mfi_mpi2_reply_raid_accel raid_accel; 1878 struct mfi_mpi2_reply_default reply_default; 1879 uint64_t words; 1880}; 1881 1882struct IO_REQUEST_INFO { 1883 uint64_t ldStartBlock; 1884 uint32_t numBlocks; 1885 uint16_t ldTgtId; 1886 uint8_t isRead; 1887 uint16_t devHandle; 1888 uint64_t pdBlock; 1889 uint8_t fpOkForIo; 1890}; 1891 1892#define MFI_SCSI_MAX_TARGETS 128 1893#define MFI_SCSI_MAX_LUNS 8 1894#define MFI_SCSI_INITIATOR_ID 255 1895#define MFI_SCSI_MAX_CMDS 8 1896#define MFI_SCSI_MAX_CDB_LEN 16 1897 1898#endif /* _MFIREG_H */ 1899