if_em.h revision 114554
1/************************************************************************** 2 3Copyright (c) 2001-2003, Intel Corporation 4All rights reserved. 5 6Redistribution and use in source and binary forms, with or without 7modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30POSSIBILITY OF SUCH DAMAGE. 31 32***************************************************************************/ 33 34/*$FreeBSD: head/sys/dev/em/if_em.h 114554 2003-05-02 21:17:08Z pdeuskar $*/ 35 36#ifndef _EM_H_DEFINED_ 37#define _EM_H_DEFINED_ 38 39 40#include <sys/param.h> 41#include <sys/systm.h> 42#include <sys/mbuf.h> 43#include <sys/protosw.h> 44#include <sys/socket.h> 45#include <sys/malloc.h> 46#include <sys/kernel.h> 47#include <sys/sockio.h> 48 49#include <net/if.h> 50#include <net/if_arp.h> 51#include <net/ethernet.h> 52#include <net/if_dl.h> 53#include <net/if_media.h> 54 55#include <net/bpf.h> 56#include <net/if_types.h> 57#include <net/if_vlan_var.h> 58 59#include <netinet/in_systm.h> 60#include <netinet/in.h> 61#include <netinet/ip.h> 62#include <netinet/tcp.h> 63#include <netinet/udp.h> 64 65#include <sys/bus.h> 66#include <machine/bus.h> 67#include <sys/rman.h> 68#include <machine/resource.h> 69#include <vm/vm.h> 70#include <vm/pmap.h> 71#include <machine/clock.h> 72#include <pci/pcivar.h> 73#include <pci/pcireg.h> 74#include <sys/endian.h> 75#include "opt_bdg.h" 76 77#include <dev/em/if_em_hw.h> 78 79/* Tunables */ 80 81/* 82 * TxDescriptors 83 * Valid Range: 80-256 for 82542 and 82543-based adapters 84 * 80-4096 for 82540, 82544, 82545, and 82546-based adapters 85 * Default Value: 256 86 * This value is the number of transmit descriptors allocated by the driver. 87 * Increasing this value allows the driver to queue more transmits. Each 88 * descriptor is 16 bytes. 89 */ 90#define EM_MAX_TXD 256 91 92/* 93 * RxDescriptors 94 * Valid Range: 80-256 for 82542 and 82543-based adapters 95 * 80-4096 for 82540, 82544, 82545, and 82546-based adapters 96 * Default Value: 256 97 * This value is the number of receive descriptors allocated by the driver. 98 * Increasing this value allows the driver to buffer more incoming packets. 99 * Each descriptor is 16 bytes. A receive buffer is also allocated for each 100 * descriptor. The maximum MTU size is 16110. 101 * 102 */ 103#define EM_MAX_RXD 256 104 105/* 106 * TxIntDelay 107 * Valid Range: 0-65535 (0=off) 108 * Default Value: 64 109 * This value delays the generation of transmit interrupts in units of 110 * 1.024 microseconds. Transmit interrupt reduction can improve CPU 111 * efficiency if properly tuned for specific network traffic. If the 112 * system is reporting dropped transmits, this value may be set too high 113 * causing the driver to run out of available transmit descriptors. 114 */ 115#define EM_TIDV 64 116 117/* 118 * TxAbsIntDelay (82540, 82545, and 82546-based adapters only) 119 * Valid Range: 0-65535 (0=off) 120 * Default Value: 64 121 * This value, in units of 1.024 microseconds, limits the delay in which a 122 * transmit interrupt is generated. Useful only if TxIntDelay is non-zero, 123 * this value ensures that an interrupt is generated after the initial 124 * packet is sent on the wire within the set amount of time. Proper tuning, 125 * along with TxIntDelay, may improve traffic throughput in specific 126 * network conditions. 127 */ 128#define EM_TADV 64 129 130/* 131 * RxIntDelay 132 * Valid Range: 0-65535 (0=off) 133 * Default Value: 0 134 * This value delays the generation of receive interrupts in units of 1.024 135 * microseconds. Receive interrupt reduction can improve CPU efficiency if 136 * properly tuned for specific network traffic. Increasing this value adds 137 * extra latency to frame reception and can end up decreasing the throughput 138 * of TCP traffic. If the system is reporting dropped receives, this value 139 * may be set too high, causing the driver to run out of available receive 140 * descriptors. 141 * 142 * CAUTION: When setting RxIntDelay to a value other than 0, adapters 143 * may hang (stop transmitting) under certain network conditions. 144 * If this occurs a WATCHDOG message is logged in the system event log. 145 * In addition, the controller is automatically reset, restoring the 146 * network connection. To eliminate the potential for the hang 147 * ensure that RxIntDelay is set to 0. 148 */ 149#define EM_RDTR 0 150 151/* 152 * RxAbsIntDelay (82540, 82545, and 82546-based adapters only) 153 * Valid Range: 0-65535 (0=off) 154 * Default Value: 64 155 * This value, in units of 1.024 microseconds, limits the delay in which a 156 * receive interrupt is generated. Useful only if RxIntDelay is non-zero, 157 * this value ensures that an interrupt is generated after the initial 158 * packet is received within the set amount of time. Proper tuning, 159 * along with RxIntDelay, may improve traffic throughput in specific network 160 * conditions. 161 */ 162#define EM_RADV 64 163 164 165/* 166 * This parameter controls the maximum no of times the driver will loop 167 * in the isr. 168 * Minimum Value = 1 169 */ 170#define EM_MAX_INTR 3 171 172/* 173 * Inform the stack about transmit checksum offload capabilities. 174 */ 175#define EM_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP) 176 177/* 178 * This parameter controls the duration of transmit watchdog timer. 179 */ 180#define EM_TX_TIMEOUT 5 /* set to 5 seconds */ 181 182/* 183 * This parameter controls when the driver calls the routine to reclaim 184 * transmit descriptors. 185 */ 186#define EM_TX_CLEANUP_THRESHOLD EM_MAX_TXD / 8 187 188/* 189 * This parameter controls whether or not autonegotation is enabled. 190 * 0 - Disable autonegotiation 191 * 1 - Enable autonegotiation 192 */ 193#define DO_AUTO_NEG 1 194 195/* 196 * This parameter control whether or not the driver will wait for 197 * autonegotiation to complete. 198 * 1 - Wait for autonegotiation to complete 199 * 0 - Don't wait for autonegotiation to complete 200 */ 201#define WAIT_FOR_AUTO_NEG_DEFAULT 1 202 203 204/* Tunables -- End */ 205 206#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ 207 ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ 208 ADVERTISE_1000_FULL) 209 210#define EM_VENDOR_ID 0x8086 211#define EM_MMBA 0x0010 /* Mem base address */ 212#define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1)) 213 214#define EM_JUMBO_PBA 0x00000028 215#define EM_DEFAULT_PBA 0x00000030 216#define EM_SMARTSPEED_DOWNSHIFT 3 217#define EM_SMARTSPEED_MAX 15 218 219 220#define MAX_NUM_MULTICAST_ADDRESSES 128 221#define PCI_ANY_ID (~0U) 222#define ETHER_ALIGN 2 223 224/* Defines for printing debug information */ 225#define DEBUG_INIT 0 226#define DEBUG_IOCTL 0 227#define DEBUG_HW 0 228 229#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") 230#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) 231#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) 232#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") 233#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) 234#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) 235#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") 236#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) 237#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) 238 239 240/* Supported RX Buffer Sizes */ 241#define EM_RXBUFFER_2048 2048 242#define EM_RXBUFFER_4096 4096 243#define EM_RXBUFFER_8192 8192 244#define EM_RXBUFFER_16384 16384 245 246#define EM_MAX_SCATTER 64 247 248#ifdef __alpha__ 249 #undef vtophys 250 #define vtophys(va) alpha_XXX_dmamap((vm_offset_t)(va)) 251#endif /* __alpha__ */ 252 253/* ****************************************************************************** 254 * vendor_info_array 255 * 256 * This array contains the list of Subvendor/Subdevice IDs on which the driver 257 * should load. 258 * 259 * ******************************************************************************/ 260typedef struct _em_vendor_info_t { 261 unsigned int vendor_id; 262 unsigned int device_id; 263 unsigned int subvendor_id; 264 unsigned int subdevice_id; 265 unsigned int index; 266} em_vendor_info_t; 267 268 269struct em_buffer { 270 struct mbuf *m_head; 271 bus_dmamap_t map; /* bus_dma map for packet */ 272}; 273 274struct em_q { 275 bus_dmamap_t map; /* bus_dma map for packet */ 276 int nsegs; /* # of segments/descriptors */ 277 bus_dma_segment_t segs[EM_MAX_SCATTER]; 278}; 279 280/* 281 * Bus dma allocation structure used by 282 * em_dma_malloc and em_dma_free. 283 */ 284struct em_dma_alloc { 285 u_int32_t dma_paddr; 286 caddr_t dma_vaddr; 287 bus_dma_tag_t dma_tag; 288 bus_dmamap_t dma_map; 289 bus_dma_segment_t dma_seg; 290 bus_size_t dma_size; 291 int dma_nseg; 292}; 293 294typedef enum _XSUM_CONTEXT_T { 295 OFFLOAD_NONE, 296 OFFLOAD_TCP_IP, 297 OFFLOAD_UDP_IP 298} XSUM_CONTEXT_T; 299 300/* Our adapter structure */ 301struct adapter { 302 struct arpcom interface_data; 303 struct adapter *next; 304 struct adapter *prev; 305 struct em_hw hw; 306 307 /* FreeBSD operating-system-specific structures */ 308 struct em_osdep osdep; 309 struct device *dev; 310 struct resource *res_memory; 311 struct resource *res_ioport; 312 struct resource *res_interrupt; 313 void *int_handler_tag; 314 struct ifmedia media; 315 struct callout_handle timer_handle; 316 struct callout_handle tx_fifo_timer_handle; 317 int io_rid; 318 u_int8_t unit; 319 320 /* Info about the board itself */ 321 u_int32_t part_num; 322 u_int8_t link_active; 323 u_int16_t link_speed; 324 u_int16_t link_duplex; 325 u_int32_t smartspeed; 326 u_int32_t tx_int_delay; 327 u_int32_t tx_abs_int_delay; 328 u_int32_t rx_int_delay; 329 u_int32_t rx_abs_int_delay; 330 331 XSUM_CONTEXT_T active_checksum_context; 332 333 /* 334 * Transmit definitions 335 * 336 * We have an array of num_tx_desc descriptors (handled 337 * by the controller) paired with an array of tx_buffers 338 * (at tx_buffer_area). 339 * The index of the next available descriptor is next_avail_tx_desc. 340 * The number of remaining tx_desc is num_tx_desc_avail. 341 */ 342 struct em_dma_alloc txdma; /* bus_dma glue for tx desc */ 343 struct em_tx_desc *tx_desc_base; 344 u_int32_t next_avail_tx_desc; 345 u_int32_t oldest_used_tx_desc; 346 volatile u_int16_t num_tx_desc_avail; 347 u_int16_t num_tx_desc; 348 u_int32_t txd_cmd; 349 struct em_buffer *tx_buffer_area; 350 bus_dma_tag_t txtag; /* dma tag for tx */ 351 352 /* 353 * Receive definitions 354 * 355 * we have an array of num_rx_desc rx_desc (handled by the 356 * controller), and paired with an array of rx_buffers 357 * (at rx_buffer_area). 358 * The next pair to check on receive is at offset next_rx_desc_to_check 359 */ 360 struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */ 361 struct em_rx_desc *rx_desc_base; 362 u_int32_t next_rx_desc_to_check; 363 u_int16_t num_rx_desc; 364 u_int32_t rx_buffer_len; 365 struct em_buffer *rx_buffer_area; 366 bus_dma_tag_t rxtag; 367 368 /* Jumbo frame */ 369 struct mbuf *fmp; 370 struct mbuf *lmp; 371 372 u_int16_t tx_fifo_head; 373 374 /* Misc stats maintained by the driver */ 375 unsigned long dropped_pkts; 376 unsigned long mbuf_alloc_failed; 377 unsigned long mbuf_cluster_failed; 378 unsigned long no_tx_desc_avail1; 379 unsigned long no_tx_desc_avail2; 380 unsigned long no_tx_map_avail; 381 unsigned long no_tx_dma_setup; 382 u_int64_t tx_fifo_reset; 383 u_int64_t tx_fifo_wrk; 384 385#ifdef DBG_STATS 386 unsigned long no_pkts_avail; 387 unsigned long clean_tx_interrupts; 388 389#endif 390 struct em_hw_stats stats; 391}; 392 393#endif /* _EM_H_DEFINED_ */ 394