advansys.c revision 45443
1/* 2 * Generic driver for the Advanced Systems Inc. SCSI controllers 3 * Product specific probe and attach routines can be found in: 4 * 5 * i386/isa/adv_isa.c ABP5140, ABP542, ABP5150, ABP842, ABP852 6 * i386/eisa/adv_eisa.c ABP742, ABP752 7 * pci/adv_pci.c ABP920, ABP930, ABP930U, ABP930UA, ABP940, ABP940U, 8 * ABP940UA, ABP950, ABP960, ABP960U, ABP960UA, 9 * ABP970, ABP970U 10 * 11 * Copyright (c) 1996-1998 Justin Gibbs. 12 * All rights reserved. 13 * 14 * Redistribution and use in source and binary forms, with or without 15 * modification, are permitted provided that the following conditions 16 * are met: 17 * 1. Redistributions of source code must retain the above copyright 18 * notice, this list of conditions, and the following disclaimer, 19 * without modification, immediately at the beginning of the file. 20 * 2. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 27 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * $Id: advansys.c,v 1.7 1998/12/22 18:12:09 gibbs Exp $ 36 */ 37/* 38 * Ported from: 39 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 40 * 41 * Copyright (c) 1995-1997 Advanced System Products, Inc. 42 * All Rights Reserved. 43 * 44 * Redistribution and use in source and binary forms, with or without 45 * modification, are permitted provided that redistributions of source 46 * code retain the above copyright notice and this comment without 47 * modification. 48 */ 49 50#include <sys/param.h> 51#include <sys/systm.h> 52#include <sys/malloc.h> 53#include <sys/buf.h> 54#include <sys/kernel.h> 55 56#include <machine/bus_pio.h> 57#include <machine/bus.h> 58#include <machine/clock.h> 59 60#include <cam/cam.h> 61#include <cam/cam_ccb.h> 62#include <cam/cam_sim.h> 63#include <cam/cam_xpt_sim.h> 64#include <cam/cam_xpt_periph.h> 65#include <cam/cam_debug.h> 66 67#include <cam/scsi/scsi_all.h> 68#include <cam/scsi/scsi_message.h> 69 70#include <vm/vm.h> 71#include <vm/vm_param.h> 72#include <vm/pmap.h> 73 74#include <dev/advansys/advansys.h> 75 76u_long adv_unit; 77 78static void adv_action(struct cam_sim *sim, union ccb *ccb); 79static void adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 80 int nsegments, int error); 81static void adv_poll(struct cam_sim *sim); 82static void adv_run_doneq(struct adv_softc *adv); 83static struct adv_ccb_info * 84 adv_alloc_ccb_info(struct adv_softc *adv); 85static void adv_destroy_ccb_info(struct adv_softc *adv, 86 struct adv_ccb_info *cinfo); 87static __inline struct adv_ccb_info * 88 adv_get_ccb_info(struct adv_softc *adv); 89static __inline void adv_free_ccb_info(struct adv_softc *adv, 90 struct adv_ccb_info *cinfo); 91 92 93struct adv_softc *advsoftcs[NADV]; /* XXX Config should handle this */ 94 95static __inline struct adv_ccb_info * 96adv_get_ccb_info(struct adv_softc *adv) 97{ 98 struct adv_ccb_info *cinfo; 99 int opri; 100 101 opri = splcam(); 102 if ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 103 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 104 } else { 105 cinfo = adv_alloc_ccb_info(adv); 106 } 107 splx(opri); 108 109 return (cinfo); 110} 111 112static __inline void 113adv_free_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 114{ 115 int opri; 116 117 opri = splcam(); 118 cinfo->state = ACCB_FREE; 119 SLIST_INSERT_HEAD(&adv->free_ccb_infos, cinfo, links); 120 splx(opri); 121} 122 123void 124adv_map(void *arg, bus_dma_segment_t *segs, int nseg, int error) 125{ 126 bus_addr_t* physaddr; 127 128 physaddr = (bus_addr_t*)arg; 129 *physaddr = segs->ds_addr; 130} 131 132char * 133adv_name(struct adv_softc *adv) 134{ 135 static char name[10]; 136 137 snprintf(name, sizeof(name), "adv%d", adv->unit); 138 return (name); 139} 140 141static void 142adv_action(struct cam_sim *sim, union ccb *ccb) 143{ 144 struct adv_softc *adv; 145 146 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("adv_action\n")); 147 148 adv = (struct adv_softc *)cam_sim_softc(sim); 149 150 switch (ccb->ccb_h.func_code) { 151 /* Common cases first */ 152 case XPT_SCSI_IO: /* Execute the requested I/O operation */ 153 { 154 struct ccb_hdr *ccb_h; 155 struct ccb_scsiio *csio; 156 struct adv_ccb_info *cinfo; 157 158 ccb_h = &ccb->ccb_h; 159 csio = &ccb->csio; 160 cinfo = adv_get_ccb_info(adv); 161 if (cinfo == NULL) 162 panic("XXX Handle CCB info error!!!"); 163 164 ccb_h->ccb_cinfo_ptr = cinfo; 165 166 /* Only use S/G if there is a transfer */ 167 if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 168 if ((ccb_h->flags & CAM_SCATTER_VALID) == 0) { 169 /* 170 * We've been given a pointer 171 * to a single buffer 172 */ 173 if ((ccb_h->flags & CAM_DATA_PHYS) == 0) { 174 int s; 175 int error; 176 177 s = splsoftvm(); 178 error = 179 bus_dmamap_load(adv->buffer_dmat, 180 cinfo->dmamap, 181 csio->data_ptr, 182 csio->dxfer_len, 183 adv_execute_ccb, 184 csio, /*flags*/0); 185 if (error == EINPROGRESS) { 186 /* 187 * So as to maintain ordering, 188 * freeze the controller queue 189 * until our mapping is 190 * returned. 191 */ 192 xpt_freeze_simq(adv->sim, 193 /*count*/1); 194 cinfo->state |= 195 ACCB_RELEASE_SIMQ; 196 } 197 splx(s); 198 } else { 199 struct bus_dma_segment seg; 200 201 /* Pointer to physical buffer */ 202 seg.ds_addr = 203 (bus_addr_t)csio->data_ptr; 204 seg.ds_len = csio->dxfer_len; 205 adv_execute_ccb(csio, &seg, 1, 0); 206 } 207 } else { 208 struct bus_dma_segment *segs; 209 if ((ccb_h->flags & CAM_DATA_PHYS) != 0) 210 panic("adv_setup_data - Physical " 211 "segment pointers unsupported"); 212 213 if ((ccb_h->flags & CAM_SG_LIST_PHYS) == 0) 214 panic("adv_setup_data - Virtual " 215 "segment addresses unsupported"); 216 217 /* Just use the segments provided */ 218 segs = (struct bus_dma_segment *)csio->data_ptr; 219 adv_execute_ccb(ccb, segs, csio->sglist_cnt, 0); 220 } 221 } else { 222 adv_execute_ccb(ccb, NULL, 0, 0); 223 } 224 break; 225 } 226 case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */ 227 case XPT_TARGET_IO: /* Execute target I/O request */ 228 case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */ 229 case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/ 230 case XPT_EN_LUN: /* Enable LUN as a target */ 231 case XPT_ABORT: /* Abort the specified CCB */ 232 /* XXX Implement */ 233 ccb->ccb_h.status = CAM_REQ_INVALID; 234 xpt_done(ccb); 235 break; 236 case XPT_SET_TRAN_SETTINGS: 237 { 238 struct ccb_trans_settings *cts; 239 target_bit_vector targ_mask; 240 struct adv_target_transinfo *tconf; 241 u_int update_type; 242 int s; 243 244 cts = &ccb->cts; 245 targ_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 246 tconf = &adv->tinfo[cts->ccb_h.target_id]; 247 update_type = 0; 248 if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) 249 update_type |= ADV_TRANS_GOAL; 250 if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) 251 update_type |= ADV_TRANS_USER; 252 253 s = splcam(); 254 255 if ((update_type & ADV_TRANS_GOAL) != 0) { 256 if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) { 257 if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) 258 adv->disc_enable |= targ_mask; 259 else 260 adv->disc_enable &= ~targ_mask; 261 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, 262 adv->disc_enable); 263 } 264 265 if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) { 266 if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) 267 adv->cmd_qng_enabled |= targ_mask; 268 else 269 adv->cmd_qng_enabled &= ~targ_mask; 270 } 271 } 272 273 if ((update_type & ADV_TRANS_USER) != 0) { 274 if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) { 275 if ((cts->flags & CCB_TRANS_DISC_ENB) != 0) 276 adv->user_disc_enable |= targ_mask; 277 else 278 adv->user_disc_enable &= ~targ_mask; 279 } 280 281 if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) { 282 if ((cts->flags & CCB_TRANS_TAG_ENB) != 0) 283 adv->user_cmd_qng_enabled |= targ_mask; 284 else 285 adv->user_cmd_qng_enabled &= ~targ_mask; 286 } 287 } 288 289 if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) { 290 if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) == 0) 291 cts->sync_offset = 0; 292 293 adv_period_offset_to_sdtr(adv, &cts->sync_period, 294 &cts->sync_offset, 295 cts->ccb_h.target_id); 296 297 adv_set_syncrate(adv, /*struct cam_path */NULL, 298 cts->ccb_h.target_id, cts->sync_period, 299 cts->sync_offset, update_type); 300 } 301 splx(s); 302 ccb->ccb_h.status = CAM_REQ_CMP; 303 xpt_done(ccb); 304 break; 305 } 306 case XPT_GET_TRAN_SETTINGS: 307 /* Get default/user set transfer settings for the target */ 308 { 309 struct ccb_trans_settings *cts; 310 struct adv_transinfo *tconf; 311 target_bit_vector target_mask; 312 int s; 313 314 cts = &ccb->cts; 315 target_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id); 316 317 cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB); 318 319 s = splcam(); 320 if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) { 321 tconf = &adv->tinfo[cts->ccb_h.target_id].current; 322 if ((adv->disc_enable & target_mask) != 0) 323 cts->flags |= CCB_TRANS_DISC_ENB; 324 if ((adv->cmd_qng_enabled & target_mask) != 0) 325 cts->flags |= CCB_TRANS_TAG_ENB; 326 } else { 327 tconf = &adv->tinfo[cts->ccb_h.target_id].user; 328 if ((adv->user_disc_enable & target_mask) != 0) 329 cts->flags |= CCB_TRANS_DISC_ENB; 330 if ((adv->user_cmd_qng_enabled & target_mask) != 0) 331 cts->flags |= CCB_TRANS_TAG_ENB; 332 } 333 334 cts->sync_period = tconf->period; 335 cts->sync_offset = tconf->offset; 336 splx(s); 337 338 cts->bus_width = MSG_EXT_WDTR_BUS_8_BIT; 339 cts->valid = CCB_TRANS_SYNC_RATE_VALID 340 | CCB_TRANS_SYNC_OFFSET_VALID 341 | CCB_TRANS_BUS_WIDTH_VALID 342 | CCB_TRANS_DISC_VALID 343 | CCB_TRANS_TQ_VALID; 344 ccb->ccb_h.status = CAM_REQ_CMP; 345 xpt_done(ccb); 346 break; 347 } 348 case XPT_CALC_GEOMETRY: 349 { 350 struct ccb_calc_geometry *ccg; 351 u_int32_t size_mb; 352 u_int32_t secs_per_cylinder; 353 int extended; 354 355 ccg = &ccb->ccg; 356 size_mb = ccg->volume_size 357 / ((1024L * 1024L) / ccg->block_size); 358 extended = (adv->control & ADV_CNTL_BIOS_GT_1GB) != 0; 359 360 if (size_mb > 1024 && extended) { 361 ccg->heads = 255; 362 ccg->secs_per_track = 63; 363 } else { 364 ccg->heads = 64; 365 ccg->secs_per_track = 32; 366 } 367 secs_per_cylinder = ccg->heads * ccg->secs_per_track; 368 ccg->cylinders = ccg->volume_size / secs_per_cylinder; 369 ccb->ccb_h.status = CAM_REQ_CMP; 370 xpt_done(ccb); 371 break; 372 } 373 case XPT_RESET_BUS: /* Reset the specified SCSI bus */ 374 { 375 int s; 376 377 s = splcam(); 378 adv_stop_execution(adv); 379 adv_reset_bus(adv); 380 adv_start_execution(adv); 381 splx(s); 382 383 ccb->ccb_h.status = CAM_REQ_CMP; 384 xpt_done(ccb); 385 break; 386 } 387 case XPT_TERM_IO: /* Terminate the I/O process */ 388 /* XXX Implement */ 389 ccb->ccb_h.status = CAM_REQ_INVALID; 390 xpt_done(ccb); 391 break; 392 case XPT_PATH_INQ: /* Path routing inquiry */ 393 { 394 struct ccb_pathinq *cpi = &ccb->cpi; 395 396 cpi->version_num = 1; /* XXX??? */ 397 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE; 398 cpi->target_sprt = 0; 399 cpi->hba_misc = 0; 400 cpi->hba_eng_cnt = 0; 401 cpi->max_target = 7; 402 cpi->max_lun = 7; 403 cpi->initiator_id = adv->scsi_id; 404 cpi->bus_id = cam_sim_bus(sim); 405 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 406 strncpy(cpi->hba_vid, "Advansys", HBA_IDLEN); 407 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 408 cpi->unit_number = cam_sim_unit(sim); 409 cpi->ccb_h.status = CAM_REQ_CMP; 410 xpt_done(ccb); 411 break; 412 } 413 default: 414 ccb->ccb_h.status = CAM_REQ_INVALID; 415 xpt_done(ccb); 416 break; 417 } 418} 419 420/* 421 * Currently, the output of bus_dmammap_load suits our needs just 422 * fine, but should it change, we'd need to do something here. 423 */ 424#define adv_fixup_dmasegs(adv, dm_segs) (struct adv_sg_entry *)(dm_segs) 425 426static void 427adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs, 428 int nsegments, int error) 429{ 430 struct ccb_scsiio *csio; 431 struct ccb_hdr *ccb_h; 432 struct cam_sim *sim; 433 struct adv_softc *adv; 434 struct adv_ccb_info *cinfo; 435 struct adv_scsi_q scsiq; 436 struct adv_sg_head sghead; 437 int s; 438 439 csio = (struct ccb_scsiio *)arg; 440 ccb_h = &csio->ccb_h; 441 sim = xpt_path_sim(ccb_h->path); 442 adv = (struct adv_softc *)cam_sim_softc(sim); 443 cinfo = (struct adv_ccb_info *)csio->ccb_h.ccb_cinfo_ptr; 444 445 if ((ccb_h->flags & CAM_CDB_POINTER) != 0) { 446 if ((ccb_h->flags & CAM_CDB_PHYS) == 0) { 447 /* XXX Need phystovirt!!!! */ 448 /* How about pmap_kenter??? */ 449 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 450 } else { 451 scsiq.cdbptr = csio->cdb_io.cdb_ptr; 452 } 453 } else { 454 scsiq.cdbptr = csio->cdb_io.cdb_bytes; 455 } 456 /* 457 * Build up the request 458 */ 459 scsiq.q1.status = 0; 460 scsiq.q1.q_no = 0; 461 scsiq.q1.cntl = 0; 462 scsiq.q1.sg_queue_cnt = 0; 463 scsiq.q1.target_id = ADV_TID_TO_TARGET_MASK(ccb_h->target_id); 464 scsiq.q1.target_lun = ccb_h->target_lun; 465 scsiq.q1.sense_len = csio->sense_len; 466 scsiq.q1.extra_bytes = 0; 467 scsiq.q2.ccb_ptr = (u_int32_t)csio; 468 scsiq.q2.target_ix = ADV_TIDLUN_TO_IX(ccb_h->target_id, 469 ccb_h->target_lun); 470 scsiq.q2.flag = 0; 471 scsiq.q2.cdb_len = csio->cdb_len; 472 if ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0) 473 scsiq.q2.tag_code = csio->tag_action; 474 else 475 scsiq.q2.tag_code = 0; 476 scsiq.q2.vm_id = 0; 477 478 if (nsegments != 0) { 479 bus_dmasync_op_t op; 480 481 scsiq.q1.data_addr = dm_segs->ds_addr; 482 scsiq.q1.data_cnt = dm_segs->ds_len; 483 if (nsegments > 1) { 484 scsiq.q1.cntl |= QC_SG_HEAD; 485 sghead.entry_cnt 486 = sghead.entry_to_copy 487 = nsegments; 488 sghead.res = 0; 489 sghead.sg_list = adv_fixup_dmasegs(adv, dm_segs); 490 scsiq.sg_head = &sghead; 491 } else { 492 scsiq.sg_head = NULL; 493 } 494 if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN) 495 op = BUS_DMASYNC_PREREAD; 496 else 497 op = BUS_DMASYNC_PREWRITE; 498 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 499 } else { 500 scsiq.q1.data_addr = 0; 501 scsiq.q1.data_cnt = 0; 502 scsiq.sg_head = NULL; 503 } 504 505 s = splcam(); 506 507 /* 508 * Last time we need to check if this SCB needs to 509 * be aborted. 510 */ 511 if (ccb_h->status != CAM_REQ_INPROG) { 512 if (nsegments != 0) { 513 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 514 } 515 if ((cinfo->state & ACCB_RELEASE_SIMQ) != 0) { 516 ccb_h->status |= CAM_RELEASE_SIMQ; 517 } 518 adv_free_ccb_info(adv, cinfo); 519 xpt_done((union ccb *)csio); 520 splx(s); 521 return; 522 } 523 524 if (adv_execute_scsi_queue(adv, &scsiq, csio->dxfer_len) != 0) { 525 /* Temporary resource shortage */ 526 if (nsegments != 0) { 527 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 528 } 529 ccb_h->status = CAM_REQUEUE_REQ; 530 if ((cinfo->state & ACCB_RELEASE_SIMQ) != 0) 531 ccb_h->status |= CAM_RELEASE_SIMQ; 532 533 /* Unfreeze when resources are available */ 534 xpt_freeze_simq(adv->sim, /*count*/1); 535 536 adv_free_ccb_info(adv, cinfo); 537 xpt_done((union ccb *)csio); 538 splx(s); 539 return; 540 } 541 cinfo->state |= ACCB_ACTIVE; 542 ccb_h->status |= CAM_SIM_QUEUED; 543 LIST_INSERT_HEAD(&adv->pending_ccbs, ccb_h, sim_links.le); 544 /* Schedule our timeout */ 545 ccb_h->timeout_ch = 546 timeout(adv_timeout, csio, (ccb_h->timeout * hz)/1000); 547 splx(s); 548} 549 550static struct adv_ccb_info * 551adv_alloc_ccb_info(struct adv_softc *adv) 552{ 553 int error; 554 struct adv_ccb_info *cinfo; 555 556 cinfo = malloc(sizeof(*cinfo), M_DEVBUF, M_NOWAIT); 557 if (cinfo == NULL) { 558 printf("%s: Can't malloc CCB info\n", adv_name(adv)); 559 return (NULL); 560 } 561 cinfo->state = ACCB_FREE; 562 error = bus_dmamap_create(adv->buffer_dmat, /*flags*/0, 563 &cinfo->dmamap); 564 if (error != 0) { 565 printf("%s: Unable to allocate CCB info " 566 "dmamap - error %d\n", adv_name(adv), error); 567 free(cinfo, M_DEVBUF); 568 cinfo = NULL; 569 } 570 return (cinfo); 571} 572 573static void 574adv_destroy_ccb_info(struct adv_softc *adv, struct adv_ccb_info *cinfo) 575{ 576 bus_dmamap_destroy(adv->buffer_dmat, cinfo->dmamap); 577 free(cinfo, M_DEVBUF); 578} 579 580void 581adv_timeout(void *arg) 582{ 583 int s; 584 union ccb *ccb; 585 struct adv_softc *adv; 586 struct adv_ccb_info *cinfo; 587 588 ccb = (union ccb *)arg; 589 adv = (struct adv_softc *)xpt_path_sim(ccb->ccb_h.path)->softc; 590 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 591 592 xpt_print_path(ccb->ccb_h.path); 593 printf("Timed out\n"); 594 595 s = splcam(); 596 /* Have we been taken care of already?? */ 597 if (cinfo == NULL || cinfo->state == ACCB_FREE) { 598 splx(s); 599 return; 600 } 601 602 adv_stop_execution(adv); 603 604 if ((cinfo->state & ACCB_ABORT_QUEUED) == 0) { 605 struct ccb_hdr *ccb_h; 606 607 /* 608 * In order to simplify the recovery process, we ask the XPT 609 * layer to halt the queue of new transactions and we traverse 610 * the list of pending CCBs and remove their timeouts. This 611 * means that the driver attempts to clear only one error 612 * condition at a time. In general, timeouts that occur 613 * close together are related anyway, so there is no benefit 614 * in attempting to handle errors in parrallel. Timeouts will 615 * be reinstated when the recovery process ends. 616 */ 617 if ((cinfo->state & ACCB_RELEASE_SIMQ) == 0) { 618 xpt_freeze_simq(adv->sim, /*count*/1); 619 cinfo->state |= ACCB_RELEASE_SIMQ; 620 } 621 622 /* This CCB is the CCB representing our recovery actions */ 623 cinfo->state |= ACCB_RECOVERY_CCB|ACCB_ABORT_QUEUED; 624 625 ccb_h = LIST_FIRST(&adv->pending_ccbs); 626 while (ccb_h != NULL) { 627 untimeout(adv_timeout, ccb_h, ccb_h->timeout_ch); 628 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 629 } 630 631 /* XXX Should send a BDR */ 632 /* Attempt an abort as our first tact */ 633 xpt_print_path(ccb->ccb_h.path); 634 printf("Attempting abort\n"); 635 adv_abort_ccb(adv, ccb->ccb_h.target_id, 636 ccb->ccb_h.target_lun, ccb, 637 CAM_CMD_TIMEOUT, /*queued_only*/FALSE); 638 ccb->ccb_h.timeout_ch = 639 timeout(adv_timeout, ccb, 2 * hz); 640 } else { 641 /* Our attempt to perform an abort failed, go for a reset */ 642 xpt_print_path(ccb->ccb_h.path); 643 printf("Resetting bus\n"); 644 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 645 ccb->ccb_h.status |= CAM_CMD_TIMEOUT; 646 adv_reset_bus(adv); 647 } 648 adv_start_execution(adv); 649 splx(s); 650} 651 652struct adv_softc * 653adv_alloc(int unit, bus_space_tag_t tag, bus_space_handle_t bsh) 654{ 655 struct adv_softc *adv; 656 657 if (unit >= NADV) { 658 printf("adv: unit number (%d) too high\n", unit); 659 return NULL; 660 } 661 662 /* 663 * Allocate a storage area for us 664 */ 665 if (advsoftcs[unit]) { 666 printf("adv%d: memory already allocated\n", unit); 667 return NULL; 668 } 669 670 adv = malloc(sizeof(struct adv_softc), M_DEVBUF, M_NOWAIT); 671 if (!adv) { 672 printf("adv%d: cannot malloc!\n", unit); 673 return NULL; 674 } 675 bzero(adv, sizeof(struct adv_softc)); 676 LIST_INIT(&adv->pending_ccbs); 677 SLIST_INIT(&adv->free_ccb_infos); 678 advsoftcs[unit] = adv; 679 adv->unit = unit; 680 adv->tag = tag; 681 adv->bsh = bsh; 682 683 return(adv); 684} 685 686void 687adv_free(struct adv_softc *adv) 688{ 689 switch (adv->init_level) { 690 case 5: 691 { 692 struct adv_ccb_info *cinfo; 693 694 while ((cinfo = SLIST_FIRST(&adv->free_ccb_infos)) != NULL) { 695 SLIST_REMOVE_HEAD(&adv->free_ccb_infos, links); 696 adv_destroy_ccb_info(adv, cinfo); 697 } 698 699 bus_dmamap_unload(adv->sense_dmat, adv->sense_dmamap); 700 } 701 case 4: 702 bus_dmamem_free(adv->sense_dmat, adv->sense_buffers, 703 adv->sense_dmamap); 704 case 3: 705 bus_dma_tag_destroy(adv->sense_dmat); 706 case 2: 707 bus_dma_tag_destroy(adv->buffer_dmat); 708 case 1: 709 bus_dma_tag_destroy(adv->parent_dmat); 710 case 0: 711 break; 712 } 713 free(adv, M_DEVBUF); 714} 715 716int 717adv_init(struct adv_softc *adv) 718{ 719 struct adv_eeprom_config eeprom_config; 720 int checksum, i; 721 u_int16_t config_lsw; 722 u_int16_t config_msw; 723 724 adv_reset_chip_and_scsi_bus(adv); 725 adv_lib_init(adv); 726 727 /* 728 * Stop script execution. 729 */ 730 adv_write_lram_16(adv, ADV_HALTCODE_W, 0x00FE); 731 adv_stop_execution(adv); 732 if (adv_is_chip_halted(adv) == 0) { 733 printf("adv%d: Unable to halt adapter. Initialization" 734 "failed\n", adv->unit); 735 return (1); 736 } 737 ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR); 738 if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) { 739 printf("adv%d: Unable to set program counter. Initialization" 740 "failed\n", adv->unit); 741 return (1); 742 } 743 744 config_msw = ADV_INW(adv, ADV_CONFIG_MSW); 745 config_lsw = ADV_INW(adv, ADV_CONFIG_LSW); 746 747 if ((config_msw & ADV_CFG_MSW_CLR_MASK) != 0) { 748 config_msw &= (~(ADV_CFG_MSW_CLR_MASK)); 749 /* 750 * XXX The Linux code flags this as an error, 751 * but what should we report to the user??? 752 * It seems that clearing the config register 753 * makes this error recoverable. 754 */ 755 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 756 } 757 758 /* Suck in the configuration from the EEProm */ 759 checksum = adv_get_eeprom_config(adv, &eeprom_config); 760 761 eeprom_config.cfg_msw &= (~(ADV_CFG_MSW_CLR_MASK)); 762 763 if (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_AUTO_CONFIG) { 764 /* 765 * XXX The Linux code sets a warning level for this 766 * condition, yet nothing of meaning is printed to 767 * the user. What does this mean??? 768 */ 769 if (adv->chip_version == 3) { 770 if (eeprom_config.cfg_lsw != config_lsw) { 771 eeprom_config.cfg_lsw = 772 ADV_INW(adv, ADV_CONFIG_LSW); 773 } 774 if (eeprom_config.cfg_msw != config_msw) { 775 eeprom_config.cfg_msw = 776 ADV_INW(adv, ADV_CONFIG_MSW); 777 } 778 } 779 } 780 eeprom_config.cfg_lsw |= ADV_CFG_LSW_HOST_INT_ON; 781 if (adv_test_external_lram(adv) == 0) { 782 /* 783 * XXX What about non PCI cards with no 784 * external LRAM???? 785 */ 786 if ((adv->type & (ADV_PCI|ADV_ULTRA)) == (ADV_PCI|ADV_ULTRA)) { 787 eeprom_config.max_total_qng = 788 ADV_MAX_PCI_ULTRA_INRAM_TOTAL_QNG; 789 eeprom_config.max_tag_qng = 790 ADV_MAX_PCI_ULTRA_INRAM_TAG_QNG; 791 } else { 792 eeprom_config.cfg_msw |= 0x0800; 793 config_msw |= 0x0800; 794 ADV_OUTW(adv, ADV_CONFIG_MSW, config_msw); 795 eeprom_config.max_total_qng = 796 ADV_MAX_PCI_INRAM_TOTAL_QNG; 797 eeprom_config.max_tag_qng = ADV_MAX_INRAM_TAG_QNG; 798 } 799 adv->max_openings = eeprom_config.max_total_qng; 800 } 801 if (checksum == eeprom_config.chksum) { 802 /* Range/Sanity checking */ 803 if (eeprom_config.max_total_qng < ADV_MIN_TOTAL_QNG) { 804 eeprom_config.max_total_qng = ADV_MIN_TOTAL_QNG; 805 } 806 if (eeprom_config.max_total_qng > ADV_MAX_TOTAL_QNG) { 807 eeprom_config.max_total_qng = ADV_MAX_TOTAL_QNG; 808 } 809 if (eeprom_config.max_tag_qng > eeprom_config.max_total_qng) { 810 eeprom_config.max_tag_qng = eeprom_config.max_total_qng; 811 } 812 if (eeprom_config.max_tag_qng < ADV_MIN_TAG_Q_PER_DVC) { 813 eeprom_config.max_tag_qng = ADV_MIN_TAG_Q_PER_DVC; 814 } 815 adv->max_openings = eeprom_config.max_total_qng; 816 817 adv->user_disc_enable = eeprom_config.disc_enable; 818 adv->user_cmd_qng_enabled = eeprom_config.use_cmd_qng; 819 adv->isa_dma_speed = EEPROM_DMA_SPEED(eeprom_config); 820 adv->scsi_id = EEPROM_SCSIID(eeprom_config) & ADV_MAX_TID; 821 EEPROM_SET_SCSIID(eeprom_config, adv->scsi_id); 822 adv->control = eeprom_config.cntl; 823 for (i = 0; i <= ADV_MAX_TID; i++) 824 adv_sdtr_to_period_offset(adv, 825 eeprom_config.sdtr_data[i], 826 &adv->tinfo[i].user.period, 827 &adv->tinfo[i].user.offset, 828 i); 829 } else { 830 u_int8_t sync_data; 831 832 printf("adv%d: Warning EEPROM Checksum mismatch. " 833 "Using default device parameters\n", adv->unit); 834 835 /* Set reasonable defaults since we can't read the EEPROM */ 836 adv->isa_dma_speed = /*ADV_DEF_ISA_DMA_SPEED*/1; 837 adv->max_openings = ADV_DEF_MAX_TOTAL_QNG; 838 adv->disc_enable = TARGET_BIT_VECTOR_SET; 839 adv->user_disc_enable = TARGET_BIT_VECTOR_SET; 840 adv->cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 841 adv->user_cmd_qng_enabled = TARGET_BIT_VECTOR_SET; 842 adv->scsi_id = 7; 843 844 sync_data = ADV_DEF_SDTR_OFFSET | (ADV_DEF_SDTR_INDEX << 4); 845 for (i = 0; i <= ADV_MAX_TID; i++) 846 adv_sdtr_to_period_offset(adv, sync_data, 847 &adv->tinfo[i].user.period, 848 &adv->tinfo[i].user.offset, 849 i); 850 } 851 852 if (adv_set_eeprom_config(adv, &eeprom_config) != 0) 853 printf("%s: WARNING! Failure writing to EEPROM.\n", 854 adv_name(adv)); 855 856 adv_set_chip_scsiid(adv, adv->scsi_id); 857 if (adv_init_lram_and_mcode(adv)) 858 return (1); 859 860 adv->disc_enable = adv->user_disc_enable; 861 862 adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable); 863 for (i = 0; i <= ADV_MAX_TID; i++) { 864 /* 865 * Start off in async mode. 866 */ 867 adv_set_syncrate(adv, /*struct cam_path */NULL, 868 i, /*period*/0, /*offset*/0, 869 ADV_TRANS_CUR); 870 /* 871 * Enable the use of tagged commands on all targets. 872 * This allows the kernel driver to make up it's own mind 873 * as it sees fit to tag queue instead of having the 874 * firmware try and second guess the tag_code settins. 875 */ 876 adv_write_lram_8(adv, ADVV_MAX_DVC_QNG_BEG + i, 877 adv->max_openings); 878 } 879 adv_write_lram_8(adv, ADVV_USE_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 880 adv_write_lram_8(adv, ADVV_CAN_TAGGED_QNG_B, TARGET_BIT_VECTOR_SET); 881 printf("adv%d: AdvanSys %s Host Adapter, SCSI ID %d, queue depth %d\n", 882 adv->unit, (adv->type & ADV_ULTRA) ? "Ultra SCSI" : "SCSI", 883 adv->scsi_id, adv->max_openings); 884 return (0); 885} 886 887void 888adv_intr(void *arg) 889{ 890 struct adv_softc *adv; 891 u_int16_t chipstat; 892 u_int16_t saved_ram_addr; 893 u_int8_t ctrl_reg; 894 u_int8_t saved_ctrl_reg; 895 u_int8_t host_flag; 896 897 adv = (struct adv_softc *)arg; 898 899 ctrl_reg = ADV_INB(adv, ADV_CHIP_CTRL); 900 saved_ctrl_reg = ctrl_reg & (~(ADV_CC_SCSI_RESET | ADV_CC_CHIP_RESET | 901 ADV_CC_SINGLE_STEP | ADV_CC_DIAG | 902 ADV_CC_TEST)); 903 904 905 if ((chipstat = ADV_INW(adv, ADV_CHIP_STATUS)) & ADV_CSW_INT_PENDING) { 906 907 saved_ram_addr = ADV_INW(adv, ADV_LRAM_ADDR); 908 host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B); 909 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, 910 host_flag | ADV_HOST_FLAG_IN_ISR); 911 912 adv_ack_interrupt(adv); 913 914 if ((chipstat & ADV_CSW_HALTED) 915 && (ctrl_reg & ADV_CC_SINGLE_STEP)) { 916 adv_isr_chip_halted(adv); 917 saved_ctrl_reg &= ~ADV_CC_HALT; 918 } else { 919 adv_run_doneq(adv); 920 } 921 ADV_OUTW(adv, ADV_LRAM_ADDR, saved_ram_addr); 922#ifdef DIAGNOSTIC 923 if (ADV_INW(adv, ADV_LRAM_ADDR) != saved_ram_addr) 924 panic("adv_intr: Unable to set LRAM addr"); 925#endif 926 adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag); 927 } 928 929 ADV_OUTB(adv, ADV_CHIP_CTRL, saved_ctrl_reg); 930} 931 932void 933adv_run_doneq(struct adv_softc *adv) 934{ 935 struct adv_q_done_info scsiq; 936 u_int doneq_head; 937 u_int done_qno; 938 939 doneq_head = adv_read_lram_16(adv, ADVV_DONE_Q_TAIL_W) & 0xFF; 940 done_qno = adv_read_lram_8(adv, ADV_QNO_TO_QADDR(doneq_head) 941 + ADV_SCSIQ_B_FWD); 942 while (done_qno != ADV_QLINK_END) { 943 union ccb* ccb; 944 u_int done_qaddr; 945 u_int sg_queue_cnt; 946 int aborted; 947 948 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 949 950 /* Pull status from this request */ 951 sg_queue_cnt = adv_copy_lram_doneq(adv, done_qaddr, &scsiq, 952 adv->max_dma_count); 953 954 /* Mark it as free */ 955 adv_write_lram_8(adv, done_qaddr + ADV_SCSIQ_B_STATUS, 956 scsiq.q_status & ~(QS_READY|QS_ABORTED)); 957 958 /* Process request based on retrieved info */ 959 if ((scsiq.cntl & QC_SG_HEAD) != 0) { 960 u_int i; 961 962 /* 963 * S/G based request. Free all of the queue 964 * structures that contained S/G information. 965 */ 966 for (i = 0; i < sg_queue_cnt; i++) { 967 done_qno = adv_read_lram_8(adv, done_qaddr 968 + ADV_SCSIQ_B_FWD); 969 970#ifdef DIAGNOSTIC 971 if (done_qno == ADV_QLINK_END) { 972 panic("adv_qdone: Corrupted SG " 973 "list encountered"); 974 } 975#endif 976 done_qaddr = ADV_QNO_TO_QADDR(done_qno); 977 978 /* Mark SG queue as free */ 979 adv_write_lram_8(adv, done_qaddr 980 + ADV_SCSIQ_B_STATUS, QS_FREE); 981 } 982 } else 983 sg_queue_cnt = 0; 984#ifdef DIAGNOSTIC 985 if (adv->cur_active < (sg_queue_cnt + 1)) 986 panic("adv_qdone: Attempting to free more " 987 "queues than are active"); 988#endif 989 adv->cur_active -= sg_queue_cnt + 1; 990 991 aborted = (scsiq.q_status & QS_ABORTED) != 0; 992 993 if ((scsiq.q_status != QS_DONE) 994 && (scsiq.q_status & QS_ABORTED) == 0) 995 panic("adv_qdone: completed scsiq with unknown status"); 996 997 scsiq.remain_bytes += scsiq.extra_bytes; 998 999 if ((scsiq.d3.done_stat == QD_WITH_ERROR) && 1000 (scsiq.d3.host_stat == QHSTA_M_DATA_OVER_RUN)) { 1001 if ((scsiq.cntl & (QC_DATA_IN|QC_DATA_OUT)) == 0) { 1002 scsiq.d3.done_stat = QD_NO_ERROR; 1003 scsiq.d3.host_stat = QHSTA_NO_ERROR; 1004 } 1005 } 1006 1007 ccb = (union ccb *)scsiq.d2.ccb_ptr; 1008 ccb->csio.resid = scsiq.remain_bytes; 1009 adv_done(adv, (union ccb *)scsiq.d2.ccb_ptr, 1010 scsiq.d3.done_stat, scsiq.d3.host_stat, 1011 scsiq.d3.scsi_stat, scsiq.q_no); 1012 1013 doneq_head = done_qno; 1014 done_qno = adv_read_lram_8(adv, done_qaddr + ADV_SCSIQ_B_FWD); 1015 } 1016 adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, doneq_head); 1017} 1018 1019 1020void 1021adv_done(struct adv_softc *adv, union ccb *ccb, u_int done_stat, 1022 u_int host_stat, u_int scsi_status, u_int q_no) 1023{ 1024 struct adv_ccb_info *cinfo; 1025 1026 cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr; 1027 /* 1028 * Null this out so that we catch driver bugs that cause a 1029 * ccb to be completed twice. 1030 */ 1031 ccb->ccb_h.ccb_cinfo_ptr = NULL; 1032 1033 LIST_REMOVE(&ccb->ccb_h, sim_links.le); 1034 untimeout(adv_timeout, ccb, ccb->ccb_h.timeout_ch); 1035 if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { 1036 bus_dmasync_op_t op; 1037 1038 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) 1039 op = BUS_DMASYNC_POSTREAD; 1040 else 1041 op = BUS_DMASYNC_POSTWRITE; 1042 bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op); 1043 bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap); 1044 } 1045 1046 switch (done_stat) { 1047 case QD_NO_ERROR: 1048 if (host_stat == QHSTA_NO_ERROR) { 1049 ccb->ccb_h.status = CAM_REQ_CMP; 1050 break; 1051 } 1052 xpt_print_path(ccb->ccb_h.path); 1053 printf("adv_done - queue done without error, " 1054 "but host status non-zero(%x)\n", host_stat); 1055 /*FALLTHROUGH*/ 1056 case QD_WITH_ERROR: 1057 switch (host_stat) { 1058 case QHSTA_M_TARGET_STATUS_BUSY: 1059 case QHSTA_M_BAD_QUEUE_FULL_OR_BUSY: 1060 /* 1061 * Assume that if we were a tagged transaction 1062 * the target reported queue full. Otherwise, 1063 * report busy. The firmware really should just 1064 * pass the original status back up to us even 1065 * if it thinks the target was in error for 1066 * returning this status as no other transactions 1067 * from this initiator are in effect, but this 1068 * ignores multi-initiator setups and there is 1069 * evidence that the firmware gets its per-device 1070 * transaction counts screwed up occassionally. 1071 */ 1072 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1073 if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0 1074 && host_stat != QHSTA_M_TARGET_STATUS_BUSY) 1075 scsi_status = SCSI_STATUS_QUEUE_FULL; 1076 else 1077 scsi_status = SCSI_STATUS_BUSY; 1078 adv_abort_ccb(adv, ccb->ccb_h.target_id, 1079 ccb->ccb_h.target_lun, 1080 /*ccb*/NULL, CAM_REQUEUE_REQ, 1081 /*queued_only*/TRUE); 1082 /*FALLTHROUGH*/ 1083 case QHSTA_M_NO_AUTO_REQ_SENSE: 1084 case QHSTA_NO_ERROR: 1085 ccb->csio.scsi_status = scsi_status; 1086 switch (scsi_status) { 1087 case SCSI_STATUS_CHECK_COND: 1088 case SCSI_STATUS_CMD_TERMINATED: 1089 ccb->ccb_h.status |= CAM_AUTOSNS_VALID; 1090 /* Structure copy */ 1091 ccb->csio.sense_data = 1092 adv->sense_buffers[q_no - 1]; 1093 /* FALLTHROUGH */ 1094 case SCSI_STATUS_BUSY: 1095 case SCSI_STATUS_RESERV_CONFLICT: 1096 case SCSI_STATUS_QUEUE_FULL: 1097 case SCSI_STATUS_COND_MET: 1098 case SCSI_STATUS_INTERMED: 1099 case SCSI_STATUS_INTERMED_COND_MET: 1100 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; 1101 break; 1102 case SCSI_STATUS_OK: 1103 ccb->ccb_h.status |= CAM_REQ_CMP; 1104 break; 1105 } 1106 break; 1107 case QHSTA_M_SEL_TIMEOUT: 1108 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 1109 break; 1110 case QHSTA_M_DATA_OVER_RUN: 1111 ccb->ccb_h.status = CAM_DATA_RUN_ERR; 1112 break; 1113 case QHSTA_M_UNEXPECTED_BUS_FREE: 1114 ccb->ccb_h.status = CAM_UNEXP_BUSFREE; 1115 break; 1116 case QHSTA_M_BAD_BUS_PHASE_SEQ: 1117 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1118 break; 1119 case QHSTA_M_BAD_CMPL_STATUS_IN: 1120 /* No command complete after a status message */ 1121 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1122 break; 1123 case QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT: 1124 case QHSTA_M_WTM_TIMEOUT: 1125 case QHSTA_M_HUNG_REQ_SCSI_BUS_RESET: 1126 /* The SCSI bus hung in a phase */ 1127 ccb->ccb_h.status = CAM_SEQUENCE_FAIL; 1128 adv_reset_bus(adv); 1129 break; 1130 case QHSTA_D_QDONE_SG_LIST_CORRUPTED: 1131 case QHSTA_D_ASC_DVC_ERROR_CODE_SET: 1132 case QHSTA_D_HOST_ABORT_FAILED: 1133 case QHSTA_D_EXE_SCSI_Q_FAILED: 1134 case QHSTA_D_ASPI_NO_BUF_POOL: 1135 case QHSTA_M_AUTO_REQ_SENSE_FAIL: 1136 case QHSTA_M_BAD_TAG_CODE: 1137 case QHSTA_D_LRAM_CMP_ERROR: 1138 case QHSTA_M_MICRO_CODE_ERROR_HALT: 1139 default: 1140 panic("%s: Unhandled Host status error %x", 1141 adv_name(adv), host_stat); 1142 /* NOTREACHED */ 1143 } 1144 break; 1145 1146 case QD_ABORTED_BY_HOST: 1147 /* Don't clobber any, more explicit, error codes we've set */ 1148 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG) 1149 ccb->ccb_h.status = CAM_REQ_ABORTED; 1150 break; 1151 1152 default: 1153 xpt_print_path(ccb->ccb_h.path); 1154 printf("adv_done - queue done with unknown status %x:%x\n", 1155 done_stat, host_stat); 1156 ccb->ccb_h.status = CAM_REQ_CMP_ERR; 1157 break; 1158 } 1159 if ((cinfo->state & ACCB_RELEASE_SIMQ) != 0) 1160 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 1161 else if (adv->openings_needed > 0) { 1162 int openings; 1163 1164 openings = adv->max_openings - adv->cur_active - ADV_MIN_FREE_Q; 1165 if (openings >= adv->openings_needed) { 1166 ccb->ccb_h.status |= CAM_RELEASE_SIMQ; 1167 adv->openings_needed = 0; 1168 } 1169 } 1170 if ((cinfo->state & ACCB_RECOVERY_CCB) != 0) { 1171 /* 1172 * We now traverse our list of pending CCBs and reinstate 1173 * their timeouts. 1174 */ 1175 struct ccb_hdr *ccb_h; 1176 1177 ccb_h = LIST_FIRST(&adv->pending_ccbs); 1178 while (ccb_h != NULL) { 1179 ccb_h->timeout_ch = 1180 timeout(adv_timeout, (caddr_t)ccb_h, 1181 (ccb_h->timeout * hz) / 1000); 1182 ccb_h = LIST_NEXT(ccb_h, sim_links.le); 1183 } 1184 printf("%s: No longer in timeout\n", adv_name(adv)); 1185 } 1186 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP 1187 && (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) { 1188 xpt_freeze_devq(ccb->ccb_h.path, /*count*/1); 1189 ccb->ccb_h.status |= CAM_DEV_QFRZN; 1190 } 1191 adv_free_ccb_info(adv, cinfo); 1192 ccb->ccb_h.status &= ~CAM_SIM_QUEUED; 1193 xpt_done(ccb); 1194} 1195 1196/* 1197 * Function to poll for command completion when 1198 * interrupts are disabled (crash dumps) 1199 */ 1200static void 1201adv_poll(struct cam_sim *sim) 1202{ 1203 adv_intr(cam_sim_softc(sim)); 1204} 1205 1206/* 1207 * Attach all the sub-devices we can find 1208 */ 1209int 1210adv_attach(adv) 1211 struct adv_softc *adv; 1212{ 1213 struct ccb_setasync csa; 1214 struct cam_devq *devq; 1215 1216 /* 1217 * Create our DMA tags. These tags define the kinds of device 1218 * accessable memory allocations and memory mappings we will 1219 * need to perform during normal operation. 1220 * 1221 * Unless we need to further restrict the allocation, we rely 1222 * on the restrictions of the parent dmat, hence the common 1223 * use of MAXADDR and MAXSIZE. 1224 */ 1225 1226 /* DMA tag for mapping buffers into device visible space. */ 1227 if (bus_dma_tag_create(adv->parent_dmat, /*alignment*/0, /*boundary*/0, 1228 /*lowaddr*/BUS_SPACE_MAXADDR, 1229 /*highaddr*/BUS_SPACE_MAXADDR, 1230 /*filter*/NULL, /*filterarg*/NULL, 1231 /*maxsize*/MAXBSIZE, 1232 /*nsegments*/ADV_MAX_SG_LIST, 1233 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 1234 /*flags*/BUS_DMA_ALLOCNOW, 1235 &adv->buffer_dmat) != 0) { 1236 goto error_exit; 1237 } 1238 adv->init_level++; 1239 1240 /* DMA tag for our sense buffers */ 1241 if (bus_dma_tag_create(adv->parent_dmat, /*alignment*/0, /*boundary*/0, 1242 /*lowaddr*/BUS_SPACE_MAXADDR, 1243 /*highaddr*/BUS_SPACE_MAXADDR, 1244 /*filter*/NULL, /*filterarg*/NULL, 1245 sizeof(struct scsi_sense_data)*adv->max_openings, 1246 /*nsegments*/1, 1247 /*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT, 1248 /*flags*/0, &adv->sense_dmat) != 0) { 1249 goto error_exit; 1250 } 1251 1252 adv->init_level++; 1253 1254 /* Allocation for our sense buffers */ 1255 if (bus_dmamem_alloc(adv->sense_dmat, (void **)&adv->sense_buffers, 1256 BUS_DMA_NOWAIT, &adv->sense_dmamap) != 0) { 1257 goto error_exit; 1258 } 1259 1260 adv->init_level++; 1261 1262 /* And permanently map them */ 1263 bus_dmamap_load(adv->sense_dmat, adv->sense_dmamap, 1264 adv->sense_buffers, 1265 sizeof(struct scsi_sense_data)*adv->max_openings, 1266 adv_map, &adv->sense_physbase, /*flags*/0); 1267 1268 adv->init_level++; 1269 1270 /* 1271 * Fire up the chip 1272 */ 1273 if (adv_start_chip(adv) != 1) { 1274 printf("adv%d: Unable to start on board processor. Aborting.\n", 1275 adv->unit); 1276 return (0); 1277 } 1278 1279 /* 1280 * Create the device queue for our SIM. 1281 */ 1282 devq = cam_simq_alloc(adv->max_openings); 1283 if (devq == NULL) 1284 return (0); 1285 1286 /* 1287 * Construct our SIM entry. 1288 */ 1289 adv->sim = cam_sim_alloc(adv_action, adv_poll, "adv", adv, adv->unit, 1290 1, adv->max_openings, devq); 1291 if (adv->sim == NULL) 1292 return (0); 1293 1294 /* 1295 * Register the bus. 1296 * 1297 * XXX Twin Channel EISA Cards??? 1298 */ 1299 if (xpt_bus_register(adv->sim, 0) != CAM_SUCCESS) { 1300 cam_sim_free(adv->sim, /*free devq*/TRUE); 1301 return (0); 1302 } 1303 1304 if (xpt_create_path(&adv->path, /*periph*/NULL, cam_sim_path(adv->sim), 1305 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) 1306 == CAM_REQ_CMP) { 1307 xpt_setup_ccb(&csa.ccb_h, adv->path, /*priority*/5); 1308 csa.ccb_h.func_code = XPT_SASYNC_CB; 1309 csa.event_enable = AC_FOUND_DEVICE|AC_LOST_DEVICE; 1310 csa.callback = advasync; 1311 csa.callback_arg = adv; 1312 xpt_action((union ccb *)&csa); 1313 } 1314 return (1); 1315 1316error_exit: 1317 return (0); 1318} 1319