CAMBRIA.hints revision 239841 
1# $FreeBSD: stable/9/sys/arm/conf/CAMBRIA.hints 239841 2012-08-29 15:38:18Z gjb $
2
3#
4# Device wiring for the Gateworks Cambria 2358.
5#
6
7# DBGU is unit 0
8hint.uart.0.at="ixp0"
9hint.uart.0.addr=0xc8000000
10hint.uart.0.irq=15
11hint.uart.0.flags=0x10
12hint.uart.0.ier_rxbits=0x5d	# NB: need UUE+RTOIE
13
14# NB: no UART1 on ixp435
15
16# optional GPS serial port
17#hint.uart.1.at="ixp0"
18#hint.uart.1.addr=0x53fc0000
19#hint.uart.1.irq=20
20#hint.uart.1.ier_rxbits=0x1
21#hint.uart.1.rclk=1843200
22# optional RS485 serial port
23#hint.uart.2.at="ixp0"
24#hint.uart.2.addr=0x53f80000
25#hint.uart.2.irq=21
26#hint.uart.2.rclk=1843200
27
28# NPE Hardware Queue Manager
29hint.ixpqmgr.0.at="ixp0"
30
31# NPE wired NICs, requires ixpqmgr
32hint.npe.0.at="ixp0"
33hint.npe.0.npeid="C"
34hint.npe.0.mac="C"
35hint.npe.0.mii="C"
36hint.npe.0.phy=1
37hint.npe.1.at="ixp0"
38hint.npe.1.npeid="A"
39hint.npe.1.mac="A"
40hint.npe.1.mii="C"
41hint.npe.1.phy=2
42
43# FLASH
44hint.cfi.0.at="ixp0"
45hint.cfi.0.addr=0x50000000
46
47# CF IDE controller
48hint.ata_avila.0.at="ixp0"
49
50# Front Panel LED
51hint.fled.0.at="iicbus0"
52hint.fled.0.addr=0x5a
53
54# Octal LED Latch
55hint.led_cambria.0.at="ixp0"
56
57# GPIO pins
58hint.gpio_cambria.0.at="iicbus0"
59hint.gpio_cambria.0.addr=0x56
60
61# Analog Devices AD7418 temperature sensor
62hint.ad7418.0.at="iicbus0"
63hint.ad7418.0.addr=0x50
64
65# Dallas Semiconductor DS1672 RTC
66hint.ds1672_rtc.0.at="iicbus0"
67hint.ds1672_rtc.0.addr=0xd0
68
69# USB is part of the chip
70hint.ehci.0.at="ixp0"
71hint.ehci.0.addr=0xcd000000
72hint.ehci.0.irq=32
73hint.ehci.1.at="ixp0"
74hint.ehci.1.addr=0xce000000
75hint.ehci.1.irq=33
76