rc revision 87728
1#!/bin/sh 2# 3# Copyright (c) 2000 The FreeBSD Project 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25# SUCH DAMAGE. 26# 27# @(#)rc 5.27 (Berkeley) 6/5/91 28# $FreeBSD: head/etc/rc 87728 2001-12-12 10:12:20Z roam $ 29# 30 31# System startup script run by init on autoboot 32# or after single-user. 33# Output and error are redirected to console by init, 34# and the console is the controlling terminal. 35 36# Note that almost all of the user-configurable behavior is no longer in 37# this file, but rather in /etc/defaults/rc.conf. Please check that file 38# first before contemplating any changes here. If you do need to change 39# this file for some reason, we would like to know about it. 40 41stty status '^T' 42 43# Set shell to ignore SIGINT (2), but not children; 44# shell catches SIGQUIT (3) and returns to single user after fsck. 45# 46trap : 2 47trap : 3 # shouldn't be needed 48 49bootmode=$1 50 51HOME=/ 52PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin 53export HOME PATH 54 55# BOOTP diskless boot. We have to run the rc file early in order to 56# retarget various config files. 57# 58if [ -r /etc/rc.diskless1 ]; then 59 dlv=`/sbin/sysctl -n vfs.nfs.diskless_valid 2> /dev/null` 60 if [ ${dlv:=0} != 0 ]; then 61 . /etc/rc.diskless1 62 fi 63fi 64 65# If there is a global system configuration file, suck it in. 66# 67if [ -r /etc/defaults/rc.conf ]; then 68 . /etc/defaults/rc.conf 69 source_rc_confs 70elif [ -r /etc/rc.conf ]; then 71 . /etc/rc.conf 72fi 73 74feed_dev_random() { 75 if [ -f "${1}" -a -r "${1}" -a -s "${1}" ]; then 76# echo "Using ${1} as an entropy file" 77 cat "${1}" | dd of=/dev/random bs=8k 2>/dev/null 78 fi 79} 80 81chkdepend() { 82 svc=$1 83 svc_var=$2 84 dep=$3 85 dep_var=$4 86 87 eval svc_val=\${$svc_var} 88 eval dep_val=\${$dep_var} 89 90 case ${svc_val} in 91 [Yy][Ee][Ss]) 92 case ${dep_val} in 93 [Yy][Ee][Ss]) 94 ;; 95 *) 96 eval ${dep_var}="YES" 97 echo "DEPENDENCY NOTE: ${dep} will be enabled" \ 98 "to support ${svc}" 99 ;; 100 esac 101 ;; 102 esac 103} 104 105chkdepend amd amd_enable portmap portmap_enable 106chkdepend NFS nfs_server_enable portmap portmap_enable 107chkdepend NIS nis_server_enable portmap portmap_enable 108chkdepend NIS nis_client_enable portmap portmap_enable 109 110# Enable harvesting of entropy via devices. The sooner this happens the 111# better so that we can take advantage of the boot process. 112# 113echo -n 'Entropy harvesting:' 114 115case ${harvest_interrupt} in 116[Nn][Oo]) 117 ;; 118*) 119 if [ -w /dev/random ]; then 120 /sbin/sysctl kern.random.sys.harvest.interrupt=1 >/dev/null 121 echo -n ' interrupts' 122 fi 123 ;; 124esac 125 126case ${harvest_ethernet} in 127[Nn][Oo]) 128 ;; 129*) 130 if [ -w /dev/random ]; then 131 /sbin/sysctl kern.random.sys.harvest.ethernet=1 >/dev/null 132 echo -n ' ethernet' 133 fi 134 ;; 135esac 136 137case ${harvest_p_to_p} in 138[Nn][Oo]) 139 ;; 140*) 141 if [ -w /dev/random ]; then 142 /sbin/sysctl kern.random.sys.harvest.point_to_point=1 >/dev/null 143 echo -n ' point_to_point' 144 fi 145 ;; 146esac 147 148echo '.' 149 150# First pass at reseeding /dev/random. 151# 152case ${entropy_file} in 153[Nn][Oo] | '') 154 ;; 155*) 156 if [ -w /dev/random ]; then 157 feed_dev_random "${entropy_file}" 158 fi 159 ;; 160esac 161 162# XXX temporary until we can get the entropy 163# harvesting rate up 164# Entropy below is not great, 165# but better than nothing. 166( ps -efauxww; sysctl -a; date; df -ib; dmesg; ps -efauxww; ) \ 167 | dd of=/dev/random bs=8k 2>/dev/null 168cat /bin/ls | dd of=/dev/random bs=8k 2>/dev/null 169 170# Configure ccd devices. 171# 172if [ -r /etc/ccd.conf ]; then 173 ccdconfig -C 174fi 175 176case ${start_vinum} in 177[Yy][Ee][Ss]) 178 vinum start 179 ;; 180esac 181 182swapon -a 183 184# Last chance to do things before potentially waiting for 185# operator to do fsck related tasks 186if [ -r /etc/rc.early ]; then 187 . /etc/rc.early 188fi 189 190case ${bootmode} in 191autoboot) 192 echo 'Automatic boot in progress...' 193 case ${background_fsck} in 194 [Yy][Ee][Ss]) 195 fsck -F -p 196 ;; 197 *) 198 fsck -p 199 ;; 200 esac 201 case $? in 202 0) 203 ;; 204 2) 205 exit 1 206 ;; 207 4) 208 reboot 209 echo 'Reboot failed... help!' 210 exit 1 211 ;; 212 8) 213 case ${fsck_y_enable} in 214 [Yy][Ee][Ss]) 215 echo 'File system preen failed, trying fsck -y . . .' 216 fsck -y 217 case $? in 218 0) 219 ;; 220 *) 221 echo 'Automatic file system check failed . . . help!' 222 exit 1 223 ;; 224 esac 225 ;; 226 *) 227 echo 'Automatic file system check failed . . . help!' 228 exit 1 229 ;; 230 esac 231 ;; 232 12) 233 echo 'Reboot interrupted' 234 exit 1 235 ;; 236 130) 237 # interrupt before catcher installed 238 exit 1 239 ;; 240 *) 241 echo 'Unknown error in reboot' 242 exit 1 243 ;; 244 esac 245 ;; 246*) 247 echo 'Skipping disk checks ...' 248 ;; 249esac 250 251set -T 252trap "echo 'Reboot interrupted'; exit 1" 3 253 254# root normally must be read/write, but if this is a BOOTP NFS 255# diskless boot it does not have to be. 256# 257case ${root_rw_mount} in 258[Nn][Oo] | '') 259 ;; 260*) 261 if ! mount -u -o rw / ; then 262 echo 'Mounting root filesystem rw failed, startup aborted' 263 exit 1 264 fi 265 ;; 266esac 267 268umount -a >/dev/null 2>&1 269 270# Mount everything except nfs filesystems. 271mount -a -t nonfs 272 273case $? in 2740) 275 ;; 276*) 277 echo 'Mounting /etc/fstab filesystems failed, startup aborted' 278 exit 1 279 ;; 280esac 281 282# Run custom disk mounting function here 283# 284if [ -n "${diskless_mount}" -a -r "${diskless_mount}" ]; then 285 sh ${diskless_mount} 286fi 287 288# Reseed /dev/random with previously stored entropy. 289case ${entropy_dir} in 290[Nn][Oo]) 291 ;; 292*) 293 entropy_dir=${entropy_dir:-/var/db/entropy} 294 if [ -d "${entropy_dir}" ]; then 295 if [ -w /dev/random ]; then 296 for seedfile in ${entropy_dir}/*; do 297 feed_dev_random "${seedfile}" 298 done 299 fi 300 fi 301 ;; 302esac 303 304case ${entropy_file} in 305[Nn][Oo] | '') 306 ;; 307*) 308 if [ -w /dev/random ]; then 309 feed_dev_random "${entropy_file}" 310 fi 311 ;; 312esac 313 314adjkerntz -i 315 316purgedir() { 317 local dir file 318 319 if [ $# -eq 0 ]; then 320 purgedir . 321 else 322 for dir 323 do 324 ( 325 cd "$dir" && for file in .* * 326 do 327 [ ."$file" = .. -o ."$file" = ... ] && continue 328 if [ -d "$file" -a ! -L "$file" ] 329 then 330 purgedir "$file" 331 else 332 rm -f -- "$file" 333 fi 334 done 335 ) 336 done 337 fi 338} 339 340clean_var() { 341 if [ ! -f /var/run/clean_var ]; then 342 purgedir /var/run /var/spool/lock 343 rm -rf /var/spool/uucp/.Temp/* 344 # Keep a copy of the boot messages around 345 dmesg >/var/run/dmesg.boot 346 # And an initial utmp file 347 (cd /var/run && cp /dev/null utmp && chmod 644 utmp;) 348 >/var/run/clean_var 349 fi 350} 351 352if [ -d /var/run -a -d /var/spool/lock -a -d /var/spool/uucp/.Temp ]; then 353 # network_pass1() *may* end up writing stuff to /var - we don't want to 354 # remove it immediately afterwards - *nor* to we want to fail to clean 355 # an nfs-mounted /var. 356 clean_var 357fi 358 359# Add additional swapfile, if configured. 360# 361case ${swapfile} in 362[Nn][Oo] | '') 363 ;; 364*) 365 if [ -w "${swapfile}" -a -c /dev/mdctl ]; then 366 echo "Adding ${swapfile} as additional swap" 367 mdev=`mdconfig -a -t vnode -f ${swapfile}` && swapon /dev/${mdev} 368 fi 369 ;; 370esac 371 372# Set sysctl variables as early as we can 373# 374if [ -r /etc/rc.sysctl ]; then 375 . /etc/rc.sysctl 376fi 377 378# Configure serial devices 379# 380if [ -r /etc/rc.serial ]; then 381 . /etc/rc.serial 382fi 383 384# Start up PC-card configuration 385# 386if [ -r /etc/rc.pccard ]; then 387 . /etc/rc.pccard 388fi 389 390# Start up the initial network configuration. 391# 392if [ -r /etc/rc.network ]; then 393 . /etc/rc.network # We only need to do this once. 394 network_pass1 395fi 396 397case ${ipv6_enable} in 398[Yy][Ee][Ss]) 399 if [ -r /etc/rc.network6 ]; then 400 . /etc/rc.network6 # We only need to do this once also. 401 network6_pass1 402 fi 403 ;; 404esac 405 406# Mount NFS filesystems if present in /etc/fstab 407case "`mount -d -a -t nfs 2> /dev/null`" in 408*mount_nfs*) 409 # Handle absent nfs client support 410 nfsclient_in_kernel=0 411 if sysctl vfs.nfs >/dev/null 2>&1; then 412 nfsclient_in_kernel=1 413 else 414 kldload nfsclient && nfsclient_in_kernel=1 415 fi 416 417 case ${nfsclient_in_kernel} in 418 1) 419 echo -n 'Mounting NFS file systems:' 420 mount -a -t nfs 421 echo '.' 422 ;; 423 *) 424 echo 'Warning: nfs mount requested, but no nfs client in kernel' 425 ;; 426 esac 427 ;; 428esac 429 430# Whack the pty perms back into shape. 431# 432if ls /dev/tty[pqrsPQRS]* > /dev/null 2>&1; then 433 chflags 0 /dev/tty[pqrsPQRS]* 434 chmod 666 /dev/tty[pqrsPQRS]* 435 chown root:wheel /dev/tty[pqrsPQRS]* 436fi 437 438# Clean up left-over files 439# 440clean_var # If it hasn't already been done 441rm /var/run/clean_var 442 443# Clearing /tmp at boot-time seems to have a long tradition. It doesn't 444# help in any way for long-living systems, and it might accidentally 445# clobber files you would rather like to have preserved after a crash 446# (if not using mfs /tmp anyway). 447# 448# See also the example of another cleanup policy in /etc/periodic/daily. 449# 450case ${clear_tmp_enable} in 451[Yy][Ee][Ss]) 452 echo -n 'Clearing /tmp:' 453 # prune quickly with one rm, then use find to clean up /tmp/[lq]* 454 # (not needed with mfs /tmp, but doesn't hurt there...) 455 (cd /tmp && rm -rf [a-km-pr-zA-Z]* && 456 find -d . ! -name . ! -name lost+found ! -name quota.user \ 457 ! -name quota.group -exec rm -rf -- {} \;) 458 echo '.' 459 ;; 460esac 461 462# Remove X lock files, since they will prevent you from restarting X11 463# after a system crash. 464# 465rm -f /tmp/.X*-lock /tmp/.X11-unix/* 466 467# Snapshot any kernel -c changes back to disk here <someday>. 468# This has changed with ELF and /kernel.config. 469 470echo -n 'Additional daemons:' 471 472# Start system logging and name service. Named needs to start before syslogd 473# if you don't have a /etc/resolv.conf. 474# 475case ${syslogd_enable} in 476[Yy][Ee][Ss]) 477 # Transitional symlink (for the next couple of years :) until all 478 # binaries have had a chance to move towards /var/run/log. 479 if [ ! -L /dev/log ]; then 480 # might complain for r/o root f/s 481 ln -sf /var/run/log /dev/log 482 fi 483 484 rm -f /var/run/log 485 echo -n ' syslogd'; 486 ${syslogd_program:-/usr/sbin/syslogd} ${syslogd_flags} 487 ;; 488esac 489 490echo '.' 491 492# Build device name databases if we are not using DEVFS 493# 494if sysctl vfs.devfs.generation > /dev/null 2>&1 ; then 495 rm -f /var/run/dev.db 496else 497 dev_mkdb 498fi 499 500# Enable dumpdev so that savecore can see it. 501# /var/crash should be a directory or a symbolic link 502# to the crash directory if core dumps are to be saved. 503# 504case ${dumpdev} in 505[Nn][Oo] | '') 506 ;; 507*) 508 case ${dumpdir} in 509 '') 510 dumpdir='/var/crash' 511 ;; 512 esac 513 514 if [ -e "${dumpdev}" -a -d "${dumpdir}" ]; then 515 /sbin/dumpon -v ${dumpdev} 516 echo -n 'Checking for core dump: ' 517 /sbin/savecore ${savecore_flags} "${dumpdir}" 518 fi 519 ;; 520esac 521 522if [ -n "${network_pass1_done}" ]; then 523 network_pass2 524fi 525 526# Enable/Check the quotas (must be after ypbind if using NIS) 527# 528case ${enable_quotas} in 529[Yy][Ee][Ss]) 530 case ${check_quotas} in 531 [Yy][Ee][Ss]) 532 echo -n 'Checking quotas:' 533 quotacheck -a 534 echo ' done.' 535 ;; 536 esac 537 538 echo -n 'Enabling quotas:' 539 quotaon -a 540 echo ' done.' 541 ;; 542esac 543 544if [ -n "${network_pass2_done}" ]; then 545 network_pass3 546fi 547 548# Check the password temp/lock file 549# 550if [ -e /etc/ptmp ]; then 551 logger -s -p auth.err \ 552 "password file may be incorrect -- /etc/ptmp exists" 553fi 554 555case ${accounting_enable} in 556[Yy][Ee][Ss]) 557 if [ -d /var/account ]; then 558 echo 'Turning on accounting:' 559 if [ ! -e /var/account/acct ]; then 560 touch /var/account/acct 561 fi 562 accton /var/account/acct 563 fi 564 ;; 565esac 566 567# Make shared lib searching a little faster. Leave /usr/lib first if you 568# add your own entries or you may come to grief. 569# 570ldconfig="/sbin/ldconfig" 571case ${ldconfig_insecure} in 572[Yy][Ee][Ss]) 573 ldconfig="${ldconfig} -i" 574 ;; 575esac 576if [ -x /sbin/ldconfig ]; then 577 case `/usr/bin/objformat` in 578 elf) 579 _LDC=/usr/lib 580 for i in ${ldconfig_paths}; do 581 if [ -d "${i}" ]; then 582 _LDC="${_LDC} ${i}" 583 fi 584 done 585 echo 'ELF ldconfig path:' ${_LDC} 586 ${ldconfig} -elf ${_LDC} 587 ;; 588 esac 589 590 # Legacy aout support for i386 only 591 case `sysctl -n hw.machine` in 592 i386) 593 # Default the a.out ldconfig path. 594 : ${ldconfig_paths_aout=${ldconfig_paths}} 595 _LDC=/usr/lib/aout 596 for i in ${ldconfig_paths_aout}; do 597 if [ -d "${i}" ]; then 598 _LDC="${_LDC} ${i}" 599 fi 600 done 601 echo 'a.out ldconfig path:' ${_LDC} 602 ${ldconfig} -aout ${_LDC} 603 ;; 604 esac 605fi 606 607# Now start up miscellaneous daemons that don't belong anywhere else 608# 609echo -n 'Starting standard daemons:' 610case ${inetd_enable} in 611[Nn][Oo]) 612 ;; 613*) 614 echo -n ' inetd'; ${inetd_program:-/usr/sbin/inetd} ${inetd_flags} 615 ;; 616esac 617 618case ${cron_enable} in 619[Nn][Oo]) 620 ;; 621*) 622 echo -n ' cron'; ${cron_program:-/usr/sbin/cron} ${cron_flags} 623 ;; 624esac 625 626case ${lpd_enable} in 627[Yy][Ee][Ss]) 628 echo -n ' printer'; ${lpd_program:-/usr/sbin/lpd} ${lpd_flags} 629 ;; 630esac 631 632case ${sshd_enable} in 633[Yy][Ee][Ss]) 634 if [ -x ${sshd_program:-/usr/sbin/sshd} ]; then 635 echo -n ' sshd'; 636 ${sshd_program:-/usr/sbin/sshd} ${sshd_flags} 637 fi 638 ;; 639esac 640 641case ${usbd_enable} in 642[Yy][Ee][Ss]) 643 echo -n ' usbd'; /usr/sbin/usbd ${usbd_flags} 644 ;; 645esac 646 647if [ -r /etc/mail/sendmail.cf ]; then 648 case ${sendmail_enable} in 649 [Yy][Ee][Ss]) 650 echo -n ' sendmail' 651 /usr/sbin/sendmail ${sendmail_flags} 652 ;; 653 *) 654 case ${sendmail_outbound_enable} in 655 [Yy][Ee][Ss]) 656 echo -n ' sendmail' 657 /usr/sbin/sendmail ${sendmail_outbound_flags} 658 ;; 659 esac 660 ;; 661 esac 662fi 663 664echo '.' 665 666# Recover vi editor files. 667find /var/tmp/vi.recover ! -type f -a ! -type d -delete 668vibackup=`echo /var/tmp/vi.recover/vi.*` 669if [ "${vibackup}" != '/var/tmp/vi.recover/vi.*' ]; then 670 echo -n 'Recovering vi editor sessions:' 671 for i in /var/tmp/vi.recover/vi.*; do 672 # Only test files that are readable. 673 if [ ! -r "${i}" ]; then 674 continue 675 fi 676 677 # Unmodified nvi editor backup files either have the 678 # execute bit set or are zero length. Delete them. 679 if [ -x "${i}" -o ! -s "${i}" ]; then 680 rm -f "${i}" 681 fi 682 done 683 684 # It is possible to get incomplete recovery files, if the editor 685 # crashes at the right time. 686 virecovery=`echo /var/tmp/vi.recover/recover.*` 687 if [ "${virecovery}" != "/var/tmp/vi.recover/recover.*" ]; then 688 for i in /var/tmp/vi.recover/recover.*; do 689 # Only test files that are readable. 690 if [ ! -r "${i}" ]; then 691 continue 692 fi 693 694 # Delete any recovery files that are zero length, 695 # corrupted, or that have no corresponding backup file. 696 # Else send mail to the user. 697 recfile=`awk '/^X-vi-recover-path:/{print $2}' < "${i}"` 698 if [ -n "${recfile}" -a -s "${recfile}" ]; then 699 sendmail -t < "${i}" 700 else 701 rm -f "${i}" 702 fi 703 done 704 fi 705 echo '.' 706fi 707 708# Make a bounds file for msgs(1) if there isn't one already 709# 710if [ -d /var/msgs -a ! -f /var/msgs/bounds -a ! -L /var/msgs/bounds ]; then 711 echo 0 > /var/msgs/bounds 712fi 713 714case ${update_motd} in 715[Nn][Oo] | '') 716 ;; 717*) 718 if T=`mktemp /tmp/_motd.XXXXXX`; then 719 uname -v | sed -e 's,^\([^#]*\) #\(.* [1-2][0-9][0-9][0-9]\).*/\([^\]*\) $,\1 (\3) #\2,' > ${T} 720 awk '{if (NR == 1) {if ($1 == "FreeBSD") {next} else {print "\n"$0}} else {print}}' < /etc/motd >> ${T} 721 cmp -s ${T} /etc/motd || { 722 cp ${T} /etc/motd 723 chmod 644 /etc/motd 724 } 725 rm -f ${T} 726 fi 727 ;; 728esac 729 730# Run rc.devfs if readable to customize devfs 731# 732if [ -r /etc/rc.devfs ]; then 733 sh /etc/rc.devfs 734fi 735 736# Configure implementation specific stuff 737# 738arch=`uname -m` 739if [ -r /etc/rc.${arch} ]; then 740 . /etc/rc.${arch} 741fi 742 743# Configure the system console 744# 745if [ -r /etc/rc.syscons ]; then 746 . /etc/rc.syscons 747fi 748 749echo -n 'Additional ABI support:' 750 751# Load the SysV IPC API if requested. 752case ${sysvipc_enable} in 753[Yy][Ee][Ss]) 754 echo -n ' sysvipc' 755 kldload sysvmsg >/dev/null 2>&1 756 kldload sysvsem >/dev/null 2>&1 757 kldload sysvshm >/dev/null 2>&1 758 ;; 759esac 760 761# Start the Linux binary compatibility if requested. 762# 763case ${linux_enable} in 764[Yy][Ee][Ss]) 765 echo -n ' linux' 766 if ! kldstat -v | grep -E 'linux(aout|elf)' > /dev/null; then 767 kldload linux > /dev/null 2>&1 768 fi 769 if [ -x /compat/linux/sbin/ldconfig ]; then 770 /compat/linux/sbin/ldconfig 771 fi 772 ;; 773esac 774 775# Start the SysVR4 binary emulation if requested. 776# 777case ${svr4_enable} in 778[Yy][Ee][Ss]) 779 echo -n ' svr4'; kldload svr4 > /dev/null 2>&1 780 ;; 781esac 782 783echo '.' 784 785# Do traditional (but rather obsolete) rc.local file if it exists. If you 786# use this file and want to make it programmatic, source /etc/defaults/rc.conf 787# in /etc/rc.local and add your custom variables to /etc/rc.conf, as 788# shown below. Please do not put local extensions into /etc/rc itself. 789# Use /etc/rc.local 790# 791# ---- rc.local ---- 792# if [ -r /etc/defaults/rc.conf ]; then 793# . /etc/defaults/rc.conf 794# source_rc_confs 795# elif [ -r /etc/rc.conf ]; then 796# . /etc/rc.conf 797# fi 798# 799# ... additional startup conditionals ... 800# ---- rc.local ---- 801# 802if [ -r /etc/rc.local ]; then 803 echo -n 'Starting local daemons:' 804 sh /etc/rc.local 805 echo '.' 806fi 807 808# For each valid dir in $local_startup, search for init scripts matching *.sh 809# 810case ${local_startup} in 811[Nn][Oo] | '') 812 ;; 813*) 814 echo -n 'Local package initialization:' 815 slist="" 816 if [ -z "${script_name_sep}" ]; then 817 script_name_sep=" " 818 fi 819 for dir in ${local_startup}; do 820 if [ -d "${dir}" ]; then 821 for script in ${dir}/*.sh; do 822 slist="${slist}${script_name_sep}${script}" 823 done 824 fi 825 done 826 script_save_sep="$IFS" 827 IFS="${script_name_sep}" 828 for script in ${slist}; do 829 if [ -x "${script}" ]; then 830 (set -T 831 trap 'exit 1' 2 832 ${script} start) 833 elif [ -f "${script}" -o -L "${script}" ]; then 834 echo -n " (skipping ${script##*/}, not executable)" 835 fi 836 done 837 IFS="${script_save_sep}" 838 echo '.' 839 ;; 840esac 841 842if [ -n "${network_pass3_done}" ]; then 843 network_pass4 844fi 845 846# Raise kernel security level. This should be done only after `fsck' has 847# repaired local file systems if you want the securelevel to be greater than 1. 848# 849case ${kern_securelevel_enable} in 850[Yy][Ee][Ss]) 851 if [ "${kern_securelevel}" -ge 0 ]; then 852 echo 'Raising kernel security level: ' 853 sysctl kern.securelevel=${kern_securelevel} 854 fi 855 ;; 856esac 857 858# Start background fsck checks if necessary 859case ${background_fsck} in 860[Yy][Ee][Ss]) 861 echo 'Starting background filesystem checks' 862 nice -4 fsck -B -p 2>&1 | logger -p daemon.notice & 863 ;; 864esac 865 866echo '' 867 868date 869 870exit 0 871 872