Makefile.in revision 263421 
1# Makefile.in generated by automake 1.14 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# $Id: Makefile.am 720 2013-08-19 16:02:10Z des $
18am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
19am__make_running_with_option = \
20  case $${target_option-} in \
21      ?) ;; \
22      *) echo "am__make_running_with_option: internal error: invalid" \
23              "target option '$${target_option-}' specified" >&2; \
24         exit 1;; \
25  esac; \
26  has_opt=no; \
27  sane_makeflags=$$MAKEFLAGS; \
28  if $(am__is_gnu_make); then \
29    sane_makeflags=$$MFLAGS; \
30  else \
31    case $$MAKEFLAGS in \
32      *\\[\ \	]*) \
33        bs=\\; \
34        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
35          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
36    esac; \
37  fi; \
38  skip_next=no; \
39  strip_trailopt () \
40  { \
41    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
42  }; \
43  for flg in $$sane_makeflags; do \
44    test $$skip_next = yes && { skip_next=no; continue; }; \
45    case $$flg in \
46      *=*|--*) continue;; \
47        -*I) strip_trailopt 'I'; skip_next=yes;; \
48      -*I?*) strip_trailopt 'I';; \
49        -*O) strip_trailopt 'O'; skip_next=yes;; \
50      -*O?*) strip_trailopt 'O';; \
51        -*l) strip_trailopt 'l'; skip_next=yes;; \
52      -*l?*) strip_trailopt 'l';; \
53      -[dEDm]) skip_next=yes;; \
54      -[JT]) skip_next=yes;; \
55    esac; \
56    case $$flg in \
57      *$$target_option*) has_opt=yes; break;; \
58    esac; \
59  done; \
60  test $$has_opt = yes
61am__make_dryrun = (target_option=n; $(am__make_running_with_option))
62am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
63pkgdatadir = $(datadir)/@PACKAGE@
64pkgincludedir = $(includedir)/@PACKAGE@
65pkglibdir = $(libdir)/@PACKAGE@
66pkglibexecdir = $(libexecdir)/@PACKAGE@
67am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
68install_sh_DATA = $(install_sh) -c -m 644
69install_sh_PROGRAM = $(install_sh) -c
70install_sh_SCRIPT = $(install_sh) -c
71INSTALL_HEADER = $(INSTALL_DATA)
72transform = $(program_transform_name)
73NORMAL_INSTALL = :
74PRE_INSTALL = :
75POST_INSTALL = :
76NORMAL_UNINSTALL = :
77PRE_UNINSTALL = :
78POST_UNINSTALL = :
79build_triplet = @build@
80host_triplet = @host@
81subdir = doc/man
82DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
83	$(dist_man3_MANS) $(dist_man5_MANS)
84ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
85am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
86	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
87	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
88	$(top_srcdir)/configure.ac
89am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
90	$(ACLOCAL_M4)
91mkinstalldirs = $(install_sh) -d
92CONFIG_HEADER = $(top_builddir)/config.h
93CONFIG_CLEAN_FILES =
94CONFIG_CLEAN_VPATH_FILES =
95AM_V_P = $(am__v_P_@AM_V@)
96am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
97am__v_P_0 = false
98am__v_P_1 = :
99AM_V_GEN = $(am__v_GEN_@AM_V@)
100am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
101am__v_GEN_0 = @echo "  GEN     " $@;
102am__v_GEN_1 = 
103AM_V_at = $(am__v_at_@AM_V@)
104am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
105am__v_at_0 = @
106am__v_at_1 = 
107SOURCES =
108DIST_SOURCES =
109am__can_run_installinfo = \
110  case $$AM_UPDATE_INFO_DIR in \
111    n|no|NO) false;; \
112    *) (install-info --version) >/dev/null 2>&1;; \
113  esac
114am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
115am__vpath_adj = case $$p in \
116    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
117    *) f=$$p;; \
118  esac;
119am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
120am__install_max = 40
121am__nobase_strip_setup = \
122  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
123am__nobase_strip = \
124  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
125am__nobase_list = $(am__nobase_strip_setup); \
126  for p in $$list; do echo "$$p $$p"; done | \
127  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
128  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
129    if (++n[$$2] == $(am__install_max)) \
130      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
131    END { for (dir in files) print dir, files[dir] }'
132am__base_list = \
133  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
134  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
135am__uninstall_files_from_dir = { \
136  test -z "$$files" \
137    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
138    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
139         $(am__cd) "$$dir" && rm -f $$files; }; \
140  }
141man3dir = $(mandir)/man3
142am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"
143man5dir = $(mandir)/man5
144NROFF = nroff
145MANS = $(dist_man3_MANS) $(dist_man5_MANS)
146am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
147DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
148VPATH = $(LIBSRCDIR) $(srcdir)
149ACLOCAL = @ACLOCAL@
150AMTAR = @AMTAR@
151AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
152AR = @AR@
153AUTOCONF = @AUTOCONF@
154AUTOHEADER = @AUTOHEADER@
155AUTOMAKE = @AUTOMAKE@
156AWK = @AWK@
157CC = @CC@
158CCDEPMODE = @CCDEPMODE@
159CFLAGS = @CFLAGS@
160CPP = @CPP@
161CPPFLAGS = @CPPFLAGS@
162CRYPTO_LIBS = @CRYPTO_LIBS@
163CRYPT_LIBS = @CRYPT_LIBS@
164CYGPATH_W = @CYGPATH_W@
165DEFS = @DEFS@
166DEPDIR = @DEPDIR@
167DLLTOOL = @DLLTOOL@
168DL_LIBS = @DL_LIBS@
169DSYMUTIL = @DSYMUTIL@
170DUMPBIN = @DUMPBIN@
171ECHO_C = @ECHO_C@
172ECHO_N = @ECHO_N@
173ECHO_T = @ECHO_T@
174EGREP = @EGREP@
175EXEEXT = @EXEEXT@
176FGREP = @FGREP@
177GREP = @GREP@
178INSTALL = @INSTALL@
179INSTALL_DATA = @INSTALL_DATA@
180INSTALL_PROGRAM = @INSTALL_PROGRAM@
181INSTALL_SCRIPT = @INSTALL_SCRIPT@
182INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
183LD = @LD@
184LDFLAGS = @LDFLAGS@
185LIBOBJS = @LIBOBJS@
186LIBS = @LIBS@
187LIBTOOL = @LIBTOOL@
188LIB_MAJ = @LIB_MAJ@
189LIPO = @LIPO@
190LN_S = @LN_S@
191LTLIBOBJS = @LTLIBOBJS@
192MAKEINFO = @MAKEINFO@
193MANIFEST_TOOL = @MANIFEST_TOOL@
194MKDIR_P = @MKDIR_P@
195NM = @NM@
196NMEDIT = @NMEDIT@
197OBJDUMP = @OBJDUMP@
198OBJEXT = @OBJEXT@
199OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
200OTOOL = @OTOOL@
201OTOOL64 = @OTOOL64@
202PACKAGE = @PACKAGE@
203PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
204PACKAGE_NAME = @PACKAGE_NAME@
205PACKAGE_STRING = @PACKAGE_STRING@
206PACKAGE_TARNAME = @PACKAGE_TARNAME@
207PACKAGE_URL = @PACKAGE_URL@
208PACKAGE_VERSION = @PACKAGE_VERSION@
209PATH_SEPARATOR = @PATH_SEPARATOR@
210RANLIB = @RANLIB@
211SED = @SED@
212SET_MAKE = @SET_MAKE@
213SHELL = @SHELL@
214STRIP = @STRIP@
215VERSION = @VERSION@
216abs_builddir = @abs_builddir@
217abs_srcdir = @abs_srcdir@
218abs_top_builddir = @abs_top_builddir@
219abs_top_srcdir = @abs_top_srcdir@
220ac_ct_AR = @ac_ct_AR@
221ac_ct_CC = @ac_ct_CC@
222ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
223am__include = @am__include@
224am__leading_dot = @am__leading_dot@
225am__quote = @am__quote@
226am__tar = @am__tar@
227am__untar = @am__untar@
228bindir = @bindir@
229build = @build@
230build_alias = @build_alias@
231build_cpu = @build_cpu@
232build_os = @build_os@
233build_vendor = @build_vendor@
234builddir = @builddir@
235datadir = @datadir@
236datarootdir = @datarootdir@
237docdir = @docdir@
238dvidir = @dvidir@
239exec_prefix = @exec_prefix@
240host = @host@
241host_alias = @host_alias@
242host_cpu = @host_cpu@
243host_os = @host_os@
244host_vendor = @host_vendor@
245htmldir = @htmldir@
246includedir = @includedir@
247infodir = @infodir@
248install_sh = @install_sh@
249libdir = @libdir@
250libexecdir = @libexecdir@
251localedir = @localedir@
252localstatedir = @localstatedir@
253mandir = @mandir@
254mkdir_p = @mkdir_p@
255oldincludedir = @oldincludedir@
256pdfdir = @pdfdir@
257prefix = @prefix@
258program_transform_name = @program_transform_name@
259psdir = @psdir@
260sbindir = @sbindir@
261sharedstatedir = @sharedstatedir@
262srcdir = @srcdir@
263sysconfdir = @sysconfdir@
264target_alias = @target_alias@
265top_build_prefix = @top_build_prefix@
266top_builddir = @top_builddir@
267top_srcdir = @top_srcdir@
268NULL = 
269
270# Standard PAM API
271PMAN = \
272	pam_acct_mgmt.3 \
273	pam_authenticate.3 \
274	pam_chauthtok.3 \
275	pam_close_session.3 \
276	pam_end.3 \
277	pam_get_data.3 \
278	pam_get_item.3 \
279	pam_get_user.3 \
280	pam_getenv.3 \
281	pam_getenvlist.3 \
282	pam_open_session.3 \
283	pam_putenv.3 \
284	pam_set_data.3 \
285	pam_set_item.3 \
286	pam_setcred.3 \
287	pam_start.3 \
288	pam_strerror.3 \
289	$(NULL)
290
291
292# Standard module API
293MMAN = \
294	pam_sm_acct_mgmt.3 \
295	pam_sm_authenticate.3 \
296	pam_sm_chauthtok.3 \
297	pam_sm_close_session.3 \
298	pam_sm_open_session.3 \
299	pam_sm_setcred.3 \
300	$(NULL)
301
302
303# OpenPAM extensions
304OMAN = \
305	openpam_borrow_cred.3 \
306	openpam_free_data.3 \
307	openpam_free_envlist.3 \
308	openpam_get_feature.3 \
309	openpam_get_option.3 \
310	openpam_log.3 \
311	openpam_nullconv.3 \
312	openpam_readline.3 \
313	openpam_readlinev.3 \
314	openpam_readword.3 \
315	openpam_restore_cred.3 \
316	openpam_set_feature.3 \
317	openpam_set_option.3 \
318	openpam_straddch.3 \
319	openpam_subst.3 \
320	openpam_ttyconv.3 \
321	pam_error.3 \
322	pam_get_authtok.3 \
323	pam_info.3 \
324	pam_prompt.3 \
325	pam_setenv.3 \
326	pam_verror.3 \
327	pam_vinfo.3 \
328	pam_vprompt.3 \
329	$(NULL)
330
331EXTRA_DIST = openpam.man pam.man
332ALLCMAN = $(PMAN) $(MMAN) $(OMAN)
333GENMAN = $(ALLCMAN) openpam.3 pam.3
334dist_man3_MANS = $(GENMAN) pam_conv.3
335dist_man5_MANS = pam.conf.5
336CLEANFILES = $(GENMAN)
337GENDOC = $(top_srcdir)/misc/gendoc.pl
338LIBSRCDIR = $(top_srcdir)/lib/libpam
339SUFFIXES = .3
340all: all-am
341
342.SUFFIXES:
343.SUFFIXES: .3 .c
344$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
345	@for dep in $?; do \
346	  case '$(am__configure_deps)' in \
347	    *$$dep*) \
348	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
349	        && { if test -f $@; then exit 0; else break; fi; }; \
350	      exit 1;; \
351	  esac; \
352	done; \
353	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/man/Makefile'; \
354	$(am__cd) $(top_srcdir) && \
355	  $(AUTOMAKE) --foreign doc/man/Makefile
356.PRECIOUS: Makefile
357Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
358	@case '$?' in \
359	  *config.status*) \
360	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
361	  *) \
362	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
363	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
364	esac;
365
366$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
367	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
368
369$(top_srcdir)/configure:  $(am__configure_deps)
370	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
371$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
372	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
373$(am__aclocal_m4_deps):
374
375mostlyclean-libtool:
376	-rm -f *.lo
377
378clean-libtool:
379	-rm -rf .libs _libs
380install-man3: $(dist_man3_MANS)
381	@$(NORMAL_INSTALL)
382	@list1='$(dist_man3_MANS)'; \
383	list2=''; \
384	test -n "$(man3dir)" \
385	  && test -n "`echo $$list1$$list2`" \
386	  || exit 0; \
387	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
388	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
389	{ for i in $$list1; do echo "$$i"; done;  \
390	if test -n "$$list2"; then \
391	  for i in $$list2; do echo "$$i"; done \
392	    | sed -n '/\.3[a-z]*$$/p'; \
393	fi; \
394	} | while read p; do \
395	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
396	  echo "$$d$$p"; echo "$$p"; \
397	done | \
398	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
399	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
400	sed 'N;N;s,\n, ,g' | { \
401	list=; while read file base inst; do \
402	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
403	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
404	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
405	  fi; \
406	done; \
407	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
408	while read files; do \
409	  test -z "$$files" || { \
410	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
411	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
412	done; }
413
414uninstall-man3:
415	@$(NORMAL_UNINSTALL)
416	@list='$(dist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \
417	files=`{ for i in $$list; do echo "$$i"; done; \
418	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
419	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
420	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
421install-man5: $(dist_man5_MANS)
422	@$(NORMAL_INSTALL)
423	@list1='$(dist_man5_MANS)'; \
424	list2=''; \
425	test -n "$(man5dir)" \
426	  && test -n "`echo $$list1$$list2`" \
427	  || exit 0; \
428	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
429	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
430	{ for i in $$list1; do echo "$$i"; done;  \
431	if test -n "$$list2"; then \
432	  for i in $$list2; do echo "$$i"; done \
433	    | sed -n '/\.5[a-z]*$$/p'; \
434	fi; \
435	} | while read p; do \
436	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
437	  echo "$$d$$p"; echo "$$p"; \
438	done | \
439	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
440	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
441	sed 'N;N;s,\n, ,g' | { \
442	list=; while read file base inst; do \
443	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
444	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
445	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
446	  fi; \
447	done; \
448	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
449	while read files; do \
450	  test -z "$$files" || { \
451	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
452	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
453	done; }
454
455uninstall-man5:
456	@$(NORMAL_UNINSTALL)
457	@list='$(dist_man5_MANS)'; test -n "$(man5dir)" || exit 0; \
458	files=`{ for i in $$list; do echo "$$i"; done; \
459	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
460	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
461	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
462tags TAGS:
463
464ctags CTAGS:
465
466cscope cscopelist:
467
468
469distdir: $(DISTFILES)
470	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
471	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
472	list='$(DISTFILES)'; \
473	  dist_files=`for file in $$list; do echo $$file; done | \
474	  sed -e "s|^$$srcdirstrip/||;t" \
475	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
476	case $$dist_files in \
477	  */*) $(MKDIR_P) `echo "$$dist_files" | \
478			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
479			   sort -u` ;; \
480	esac; \
481	for file in $$dist_files; do \
482	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
483	  if test -d $$d/$$file; then \
484	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
485	    if test -d "$(distdir)/$$file"; then \
486	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
487	    fi; \
488	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
489	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
490	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
491	    fi; \
492	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
493	  else \
494	    test -f "$(distdir)/$$file" \
495	    || cp -p $$d/$$file "$(distdir)/$$file" \
496	    || exit 1; \
497	  fi; \
498	done
499check-am: all-am
500check: check-am
501all-am: Makefile $(MANS)
502installdirs:
503	for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
504	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
505	done
506install: install-am
507install-exec: install-exec-am
508install-data: install-data-am
509uninstall: uninstall-am
510
511install-am: all-am
512	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
513
514installcheck: installcheck-am
515install-strip:
516	if test -z '$(STRIP)'; then \
517	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
518	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
519	      install; \
520	else \
521	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
522	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
523	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
524	fi
525mostlyclean-generic:
526
527clean-generic:
528	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
529
530distclean-generic:
531	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
532	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
533
534maintainer-clean-generic:
535	@echo "This command is intended for maintainers to use"
536	@echo "it deletes files that may require special tools to rebuild."
537clean: clean-am
538
539clean-am: clean-generic clean-libtool mostlyclean-am
540
541distclean: distclean-am
542	-rm -f Makefile
543distclean-am: clean-am distclean-generic
544
545dvi: dvi-am
546
547dvi-am:
548
549html: html-am
550
551html-am:
552
553info: info-am
554
555info-am:
556
557install-data-am: install-man
558
559install-dvi: install-dvi-am
560
561install-dvi-am:
562
563install-exec-am:
564
565install-html: install-html-am
566
567install-html-am:
568
569install-info: install-info-am
570
571install-info-am:
572
573install-man: install-man3 install-man5
574
575install-pdf: install-pdf-am
576
577install-pdf-am:
578
579install-ps: install-ps-am
580
581install-ps-am:
582
583installcheck-am:
584
585maintainer-clean: maintainer-clean-am
586	-rm -f Makefile
587maintainer-clean-am: distclean-am maintainer-clean-generic
588
589mostlyclean: mostlyclean-am
590
591mostlyclean-am: mostlyclean-generic mostlyclean-libtool
592
593pdf: pdf-am
594
595pdf-am:
596
597ps: ps-am
598
599ps-am:
600
601uninstall-am: uninstall-man
602
603uninstall-man: uninstall-man3 uninstall-man5
604
605.MAKE: install-am install-strip
606
607.PHONY: all all-am check check-am clean clean-generic clean-libtool \
608	cscopelist-am ctags-am distclean distclean-generic \
609	distclean-libtool distdir dvi dvi-am html html-am info info-am \
610	install install-am install-data install-data-am install-dvi \
611	install-dvi-am install-exec install-exec-am install-html \
612	install-html-am install-info install-info-am install-man \
613	install-man3 install-man5 install-pdf install-pdf-am \
614	install-ps install-ps-am install-strip installcheck \
615	installcheck-am installdirs maintainer-clean \
616	maintainer-clean-generic mostlyclean mostlyclean-generic \
617	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
618	uninstall-am uninstall-man uninstall-man3 uninstall-man5
619
620
621.c.3: $(GENDOC)
622	perl -w $(GENDOC) $< || rm $@
623
624openpam.3: $(OPENPAM_MAN) $(GENDOC) $(srcdir)/openpam.man
625	perl -w $(GENDOC) -o $(OPENPAM_MAN) <$(srcdir)/openpam.man || rm $@
626
627pam.3: $(PAM_MAN) $(GENDOC) $(srcdir)/pam.man
628	perl -w $(GENDOC) -p $(PAM_MAN) <$(srcdir)/pam.man || rm $@
629
630$(GENMAN): $(GENDOC)
631
632# Tell versions [3.59,3.63) of GNU make to not export all variables.
633# Otherwise a system limit (for SysV at least) may be exceeded.
634.NOEXPORT:
635