refclock_parse.c revision 293896
1/* 2 * /src/NTP/REPOSITORY/ntp4-dev/ntpd/refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A 3 * 4 * refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A 5 * 6 * generic reference clock driver for several DCF/GPS/MSF/... receivers 7 * 8 * PPS notes: 9 * On systems that support PPSAPI (RFC2783) PPSAPI is the 10 * preferred interface. 11 * 12 * Optionally make use of a STREAMS module for input processing where 13 * available and configured. This STREAMS module reduces the time 14 * stamp latency for serial and PPS events. 15 * Currently the STREAMS module is only available for Suns running 16 * SunOS 4.x and SunOS5.x. 17 * 18 * Copyright (c) 1995-2015 by Frank Kardel <kardel <AT> ntp.org> 19 * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universitaet Erlangen-Nuernberg, Germany 20 * 21 * Redistribution and use in source and binary forms, with or without 22 * modification, are permitted provided that the following conditions 23 * are met: 24 * 1. Redistributions of source code must retain the above copyright 25 * notice, this list of conditions and the following disclaimer. 26 * 2. Redistributions in binary form must reproduce the above copyright 27 * notice, this list of conditions and the following disclaimer in the 28 * documentation and/or other materials provided with the distribution. 29 * 3. Neither the name of the author nor the names of its contributors 30 * may be used to endorse or promote products derived from this software 31 * without specific prior written permission. 32 * 33 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 34 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 35 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 36 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 37 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 38 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 39 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 40 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 41 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 42 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 43 * SUCH DAMAGE. 44 * 45 */ 46 47#ifdef HAVE_CONFIG_H 48# include "config.h" 49#endif 50 51#include "ntp_types.h" 52 53#if defined(REFCLOCK) && defined(CLOCK_PARSE) 54 55/* 56 * This driver currently provides the support for 57 * - Meinberg receiver DCF77 PZF535 (TCXO version) (DCF) 58 * - Meinberg receiver DCF77 PZF535 (OCXO version) (DCF) 59 * - Meinberg receiver DCF77 PZF509 (DCF) 60 * - Meinberg receiver DCF77 AM receivers (e.g. C51) (DCF) 61 * - IGEL CLOCK (DCF) 62 * - ELV DCF7000 (DCF) 63 * - Schmid clock (DCF) 64 * - Conrad DCF77 receiver module (DCF) 65 * - FAU DCF77 NTP receiver (TimeBrick) (DCF) 66 * - WHARTON 400A Series clock (DCF) 67 * 68 * - Meinberg GPS receivers (GPS) 69 * - Trimble (TSIP and TAIP protocol) (GPS) 70 * 71 * - RCC8000 MSF Receiver (MSF) 72 * - VARITEXT clock (MSF) 73 */ 74 75/* 76 * Meinberg receivers are usually connected via a 77 * 9600/7E1 or 19200/8N1 serial line. 78 * 79 * The Meinberg GPS receivers also have a special NTP time stamp 80 * format. The firmware release is Uni-Erlangen. 81 * 82 * Meinberg generic receiver setup: 83 * output time code every second 84 * Baud rate 9600 7E2S 85 * 86 * Meinberg GPS receiver setup: 87 * output time code every second 88 * Baudrate 19200 8N1 89 * 90 * This software supports the standard data formats used 91 * in Meinberg receivers. 92 * 93 * Special software versions are only sensible for the 94 * oldest GPS receiver, GPS16x. For newer receiver types 95 * the output string format can be configured at the device, 96 * and the device name is generally GPSxxx instead of GPS16x. 97 * 98 * Meinberg can be reached via: http://www.meinberg.de/ 99 */ 100 101#include "ntpd.h" 102#include "ntp_refclock.h" 103#include "timevalops.h" /* includes <sys/time.h> */ 104#include "ntp_control.h" 105#include "ntp_string.h" 106 107#include <stdio.h> 108#include <ctype.h> 109#ifndef TM_IN_SYS_TIME 110# include <time.h> 111#endif 112 113#ifdef HAVE_UNISTD_H 114# include <unistd.h> 115#endif 116 117#if !defined(STREAM) && !defined(HAVE_SYSV_TTYS) && !defined(HAVE_BSD_TTYS) && !defined(HAVE_TERMIOS) 118# include "Bletch: Define one of {STREAM,HAVE_SYSV_TTYS,HAVE_TERMIOS}" 119#endif 120 121#ifdef STREAM 122# include <sys/stream.h> 123# include <sys/stropts.h> 124#endif 125 126#ifdef HAVE_TERMIOS 127# include <termios.h> 128# define TTY_GETATTR(_FD_, _ARG_) tcgetattr((_FD_), (_ARG_)) 129# define TTY_SETATTR(_FD_, _ARG_) tcsetattr((_FD_), TCSANOW, (_ARG_)) 130# undef HAVE_SYSV_TTYS 131#endif 132 133#ifdef HAVE_SYSV_TTYS 134# define TTY_GETATTR(_FD_, _ARG_) ioctl((_FD_), TCGETA, (_ARG_)) 135# define TTY_SETATTR(_FD_, _ARG_) ioctl((_FD_), TCSETAW, (_ARG_)) 136#endif 137 138#ifdef HAVE_BSD_TTYS 139/* #error CURRENTLY NO BSD TTY SUPPORT */ 140# include "Bletch: BSD TTY not currently supported" 141#endif 142 143#ifdef HAVE_SYS_IOCTL_H 144# include <sys/ioctl.h> 145#endif 146 147#ifdef HAVE_PPSAPI 148# include "ppsapi_timepps.h" 149# include "refclock_atom.h" 150#endif 151 152#ifdef PPS 153# ifdef HAVE_SYS_PPSCLOCK_H 154# include <sys/ppsclock.h> 155# endif 156# ifdef HAVE_TIO_SERIAL_STUFF 157# include <linux/serial.h> 158# endif 159#endif 160 161# define BUFFER_SIZE(_BUF, _PTR) ((int)((_BUF) + sizeof(_BUF) - (_PTR))) 162# define BUFFER_SIZES(_BUF, _PTR, _SZ) ((int)((_BUF) + (_SZ) - (_PTR))) 163 164/* 165 * document type of PPS interfacing - copy of ifdef mechanism in local_input() 166 */ 167#undef PPS_METHOD 168 169#ifdef HAVE_PPSAPI 170#define PPS_METHOD "PPS API" 171#else 172#ifdef TIOCDCDTIMESTAMP 173#define PPS_METHOD "TIOCDCDTIMESTAMP" 174#else /* TIOCDCDTIMESTAMP */ 175#if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) 176#ifdef HAVE_CIOGETEV 177#define PPS_METHOD "CIOGETEV" 178#endif 179#ifdef HAVE_TIOCGPPSEV 180#define PPS_METHOD "TIOCGPPSEV" 181#endif 182#endif 183#endif /* TIOCDCDTIMESTAMP */ 184#endif /* HAVE_PPSAPI */ 185 186/* 187 * COND_DEF can be conditionally defined as DEF or 0. If defined as DEF 188 * then some more parse-specific variables are flagged to be printed with 189 * "ntpq -c cv <assid>". This can be lengthy, so by default COND_DEF 190 * should be defined as 0. 191 */ 192#if 0 193# define COND_DEF DEF // enable this for testing 194#else 195# define COND_DEF 0 // enable this by default 196#endif 197 198#include "ntp_io.h" 199#include "ntp_stdlib.h" 200 201#include "parse.h" 202#include "mbg_gps166.h" 203#include "trimble.h" 204#include "binio.h" 205#include "ascii.h" 206#include "ieee754io.h" 207#include "recvbuff.h" 208 209static char rcsid[] = "refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A+POWERUPTRUST"; 210 211/**=========================================================================== 212 ** external interface to ntp mechanism 213 **/ 214 215static int parse_start (int, struct peer *); 216static void parse_shutdown (int, struct peer *); 217static void parse_poll (int, struct peer *); 218static void parse_control (int, const struct refclockstat *, struct refclockstat *, struct peer *); 219 220struct refclock refclock_parse = { 221 parse_start, 222 parse_shutdown, 223 parse_poll, 224 parse_control, 225 noentry, 226 noentry, 227 NOFLAGS 228}; 229 230/* 231 * Definitions 232 */ 233#define MAXUNITS 4 /* maximum number of "PARSE" units permitted */ 234#define PARSEDEVICE "/dev/refclock-%d" /* device to open %d is unit number */ 235#define PARSEPPSDEVICE "/dev/refclockpps-%d" /* optional pps device to open %d is unit number */ 236 237#undef ABS 238#define ABS(_X_) (((_X_) < 0) ? -(_X_) : (_X_)) 239 240#define PARSE_HARDPPS_DISABLE 0 241#define PARSE_HARDPPS_ENABLE 1 242 243/**=========================================================================== 244 ** function vector for dynamically binding io handling mechanism 245 **/ 246 247struct parseunit; /* to keep inquiring minds happy */ 248 249typedef struct bind 250{ 251 const char *bd_description; /* name of type of binding */ 252 int (*bd_init) (struct parseunit *); /* initialize */ 253 void (*bd_end) (struct parseunit *); /* end */ 254 int (*bd_setcs) (struct parseunit *, parsectl_t *); /* set character size */ 255 int (*bd_disable) (struct parseunit *); /* disable */ 256 int (*bd_enable) (struct parseunit *); /* enable */ 257 int (*bd_getfmt) (struct parseunit *, parsectl_t *); /* get format */ 258 int (*bd_setfmt) (struct parseunit *, parsectl_t *); /* setfmt */ 259 int (*bd_timecode) (struct parseunit *, parsectl_t *); /* get time code */ 260 void (*bd_receive) (struct recvbuf *); /* receive operation */ 261 int (*bd_io_input) (struct recvbuf *); /* input operation */ 262} bind_t; 263 264#define PARSE_END(_X_) (*(_X_)->binding->bd_end)(_X_) 265#define PARSE_SETCS(_X_, _CS_) (*(_X_)->binding->bd_setcs)(_X_, _CS_) 266#define PARSE_ENABLE(_X_) (*(_X_)->binding->bd_enable)(_X_) 267#define PARSE_DISABLE(_X_) (*(_X_)->binding->bd_disable)(_X_) 268#define PARSE_GETFMT(_X_, _DCT_) (*(_X_)->binding->bd_getfmt)(_X_, _DCT_) 269#define PARSE_SETFMT(_X_, _DCT_) (*(_X_)->binding->bd_setfmt)(_X_, _DCT_) 270#define PARSE_GETTIMECODE(_X_, _DCT_) (*(_X_)->binding->bd_timecode)(_X_, _DCT_) 271 272/* 273 * special handling flags 274 */ 275#define PARSE_F_PPSONSECOND 0x00000001 /* PPS pulses are on second */ 276#define PARSE_F_POWERUPTRUST 0x00000100 /* POWERUP state ist trusted for */ 277 /* trusttime after SYNC was seen */ 278/**=========================================================================== 279 ** error message regression handling 280 ** 281 ** there are quite a few errors that can occur in rapid succession such as 282 ** noisy input data or no data at all. in order to reduce the amount of 283 ** syslog messages in such case, we are using a backoff algorithm. We limit 284 ** the number of error messages of a certain class to 1 per time unit. if a 285 ** configurable number of messages is displayed that way, we move on to the 286 ** next time unit / count for that class. a count of messages that have been 287 ** suppressed is held and displayed whenever a corresponding message is 288 ** displayed. the time units for a message class will also be displayed. 289 ** whenever an error condition clears we reset the error message state, 290 ** thus we would still generate much output on pathological conditions 291 ** where the system oscillates between OK and NOT OK states. coping 292 ** with that condition is currently considered too complicated. 293 **/ 294 295#define ERR_ALL (unsigned)~0 /* "all" errors */ 296#define ERR_BADDATA (unsigned)0 /* unusable input data/conversion errors */ 297#define ERR_NODATA (unsigned)1 /* no input data */ 298#define ERR_BADIO (unsigned)2 /* read/write/select errors */ 299#define ERR_BADSTATUS (unsigned)3 /* unsync states */ 300#define ERR_BADEVENT (unsigned)4 /* non nominal events */ 301#define ERR_INTERNAL (unsigned)5 /* internal error */ 302#define ERR_CNT (unsigned)(ERR_INTERNAL+1) 303 304#define ERR(_X_) if (list_err(parse, (_X_))) 305 306struct errorregression 307{ 308 u_long err_count; /* number of repititions per class */ 309 u_long err_delay; /* minimum delay between messages */ 310}; 311 312static struct errorregression 313err_baddata[] = /* error messages for bad input data */ 314{ 315 { 1, 0 }, /* output first message immediately */ 316 { 5, 60 }, /* output next five messages in 60 second intervals */ 317 { 3, 3600 }, /* output next 3 messages in hour intervals */ 318 { 0, 12*3600 } /* repeat messages only every 12 hours */ 319}; 320 321static struct errorregression 322err_nodata[] = /* error messages for missing input data */ 323{ 324 { 1, 0 }, /* output first message immediately */ 325 { 5, 60 }, /* output next five messages in 60 second intervals */ 326 { 3, 3600 }, /* output next 3 messages in hour intervals */ 327 { 0, 12*3600 } /* repeat messages only every 12 hours */ 328}; 329 330static struct errorregression 331err_badstatus[] = /* unsynchronized state messages */ 332{ 333 { 1, 0 }, /* output first message immediately */ 334 { 5, 60 }, /* output next five messages in 60 second intervals */ 335 { 3, 3600 }, /* output next 3 messages in hour intervals */ 336 { 0, 12*3600 } /* repeat messages only every 12 hours */ 337}; 338 339static struct errorregression 340err_badio[] = /* io failures (bad reads, selects, ...) */ 341{ 342 { 1, 0 }, /* output first message immediately */ 343 { 5, 60 }, /* output next five messages in 60 second intervals */ 344 { 5, 3600 }, /* output next 3 messages in hour intervals */ 345 { 0, 12*3600 } /* repeat messages only every 12 hours */ 346}; 347 348static struct errorregression 349err_badevent[] = /* non nominal events */ 350{ 351 { 20, 0 }, /* output first message immediately */ 352 { 6, 60 }, /* output next five messages in 60 second intervals */ 353 { 5, 3600 }, /* output next 3 messages in hour intervals */ 354 { 0, 12*3600 } /* repeat messages only every 12 hours */ 355}; 356 357static struct errorregression 358err_internal[] = /* really bad things - basically coding/OS errors */ 359{ 360 { 0, 0 }, /* output all messages immediately */ 361}; 362 363static struct errorregression * 364err_tbl[] = 365{ 366 err_baddata, 367 err_nodata, 368 err_badio, 369 err_badstatus, 370 err_badevent, 371 err_internal 372}; 373 374struct errorinfo 375{ 376 u_long err_started; /* begin time (ntp) of error condition */ 377 u_long err_last; /* last time (ntp) error occurred */ 378 u_long err_cnt; /* number of error repititions */ 379 u_long err_suppressed; /* number of suppressed messages */ 380 struct errorregression *err_stage; /* current error stage */ 381}; 382 383/**=========================================================================== 384 ** refclock instance data 385 **/ 386 387struct parseunit 388{ 389 /* 390 * NTP management 391 */ 392 struct peer *peer; /* backlink to peer structure - refclock inactive if 0 */ 393 struct refclockproc *generic; /* backlink to refclockproc structure */ 394 395 /* 396 * PARSE io 397 */ 398 bind_t *binding; /* io handling binding */ 399 400 /* 401 * parse state 402 */ 403 parse_t parseio; /* io handling structure (user level parsing) */ 404 405 /* 406 * type specific parameters 407 */ 408 struct parse_clockinfo *parse_type; /* link to clock description */ 409 410 /* 411 * clock state handling/reporting 412 */ 413 u_char flags; /* flags (leap_control) */ 414 u_long lastchange; /* time (ntp) when last state change accured */ 415 u_long statetime[CEVNT_MAX+1]; /* accumulated time of clock states */ 416 u_long pollneeddata; /* current_time(!=0) for receive sample expected in PPS mode */ 417 u_short lastformat; /* last format used */ 418 u_long lastsync; /* time (ntp) when clock was last seen fully synchronized */ 419 u_long maxunsync; /* max time in seconds a receiver is trusted after loosing synchronisation */ 420 double ppsphaseadjust; /* phase adjustment of PPS time stamp */ 421 u_long lastmissed; /* time (ntp) when poll didn't get data (powerup heuristic) */ 422 u_long ppsserial; /* magic cookie for ppsclock serials (avoids stale ppsclock data) */ 423 int ppsfd; /* fd to ise for PPS io */ 424#ifdef HAVE_PPSAPI 425 int hardppsstate; /* current hard pps state */ 426 struct refclock_atom atom; /* PPSAPI structure */ 427#endif 428 parsetime_t timedata; /* last (parse module) data */ 429 void *localdata; /* optional local, receiver-specific data */ 430 unsigned long localstate; /* private local state */ 431 struct errorinfo errors[ERR_CNT]; /* error state table for suppressing excessive error messages */ 432 struct ctl_var *kv; /* additional pseudo variables */ 433 u_long laststatistic; /* time when staticstics where output */ 434}; 435 436 437/**=========================================================================== 438 ** Clockinfo section all parameter for specific clock types 439 ** includes NTP parameters, TTY parameters and IO handling parameters 440 **/ 441 442static void poll_dpoll (struct parseunit *); 443static void poll_poll (struct peer *); 444static int poll_init (struct parseunit *); 445 446typedef struct poll_info 447{ 448 u_long rate; /* poll rate - once every "rate" seconds - 0 off */ 449 const char *string; /* string to send for polling */ 450 u_long count; /* number of characters in string */ 451} poll_info_t; 452 453#define NO_CL_FLAGS 0 454#define NO_POLL 0 455#define NO_INIT 0 456#define NO_END 0 457#define NO_EVENT 0 458#define NO_LCLDATA 0 459#define NO_MESSAGE 0 460#define NO_PPSDELAY 0 461 462#define DCF_ID "DCF" /* generic DCF */ 463#define DCF_A_ID "DCFa" /* AM demodulation */ 464#define DCF_P_ID "DCFp" /* psuedo random phase shift */ 465#define GPS_ID "GPS" /* GPS receiver */ 466 467#define NOCLOCK_ROOTDELAY 0.0 468#define NOCLOCK_BASEDELAY 0.0 469#define NOCLOCK_DESCRIPTION 0 470#define NOCLOCK_MAXUNSYNC 0 471#define NOCLOCK_CFLAG 0 472#define NOCLOCK_IFLAG 0 473#define NOCLOCK_OFLAG 0 474#define NOCLOCK_LFLAG 0 475#define NOCLOCK_ID "TILT" 476#define NOCLOCK_POLL NO_POLL 477#define NOCLOCK_INIT NO_INIT 478#define NOCLOCK_END NO_END 479#define NOCLOCK_DATA NO_LCLDATA 480#define NOCLOCK_FORMAT "" 481#define NOCLOCK_TYPE CTL_SST_TS_UNSPEC 482#define NOCLOCK_SAMPLES 0 483#define NOCLOCK_KEEP 0 484 485#define DCF_TYPE CTL_SST_TS_LF 486#define GPS_TYPE CTL_SST_TS_UHF 487 488/* 489 * receiver specific constants 490 */ 491#define MBG_SPEED (B9600) 492#define MBG_CFLAG (CS7|PARENB|CREAD|CLOCAL|HUPCL|CSTOPB) 493#define MBG_IFLAG (IGNBRK|IGNPAR|ISTRIP) 494#define MBG_OFLAG 0 495#define MBG_LFLAG 0 496#define MBG_FLAGS PARSE_F_PPSONSECOND 497 498/* 499 * Meinberg DCF77 receivers 500 */ 501#define DCFUA31_ROOTDELAY 0.0 /* 0 */ 502#define DCFUA31_BASEDELAY 0.010 /* 10.7421875ms: 10 ms (+/- 3 ms) */ 503#define DCFUA31_DESCRIPTION "Meinberg DCF77 C51 or compatible" 504#define DCFUA31_MAXUNSYNC 60*30 /* only trust clock for 1/2 hour */ 505#define DCFUA31_SPEED MBG_SPEED 506#define DCFUA31_CFLAG MBG_CFLAG 507#define DCFUA31_IFLAG MBG_IFLAG 508#define DCFUA31_OFLAG MBG_OFLAG 509#define DCFUA31_LFLAG MBG_LFLAG 510#define DCFUA31_SAMPLES 5 511#define DCFUA31_KEEP 3 512#define DCFUA31_FORMAT "Meinberg Standard" 513 514/* 515 * Meinberg DCF PZF535/TCXO (FM/PZF) receiver 516 */ 517#define DCFPZF535_ROOTDELAY 0.0 518#define DCFPZF535_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 519#define DCFPZF535_DESCRIPTION "Meinberg DCF PZF 535/509 / TCXO" 520#define DCFPZF535_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours 521 * @ 5e-8df/f we have accumulated 522 * at most 2.16 ms (thus we move to 523 * NTP synchronisation */ 524#define DCFPZF535_SPEED MBG_SPEED 525#define DCFPZF535_CFLAG MBG_CFLAG 526#define DCFPZF535_IFLAG MBG_IFLAG 527#define DCFPZF535_OFLAG MBG_OFLAG 528#define DCFPZF535_LFLAG MBG_LFLAG 529#define DCFPZF535_SAMPLES 5 530#define DCFPZF535_KEEP 3 531#define DCFPZF535_FORMAT "Meinberg Standard" 532 533/* 534 * Meinberg DCF PZF535/OCXO receiver 535 */ 536#define DCFPZF535OCXO_ROOTDELAY 0.0 537#define DCFPZF535OCXO_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 538#define DCFPZF535OCXO_DESCRIPTION "Meinberg DCF PZF 535/509 / OCXO" 539#define DCFPZF535OCXO_MAXUNSYNC 60*60*96 /* only trust clock for 4 days 540 * @ 5e-9df/f we have accumulated 541 * at most an error of 1.73 ms 542 * (thus we move to NTP synchronisation) */ 543#define DCFPZF535OCXO_SPEED MBG_SPEED 544#define DCFPZF535OCXO_CFLAG MBG_CFLAG 545#define DCFPZF535OCXO_IFLAG MBG_IFLAG 546#define DCFPZF535OCXO_OFLAG MBG_OFLAG 547#define DCFPZF535OCXO_LFLAG MBG_LFLAG 548#define DCFPZF535OCXO_SAMPLES 5 549#define DCFPZF535OCXO_KEEP 3 550#define DCFPZF535OCXO_FORMAT "Meinberg Standard" 551 552/* 553 * Meinberg GPS receivers 554 */ 555static void gps16x_message (struct parseunit *, parsetime_t *); 556static int gps16x_poll_init (struct parseunit *); 557 558#define GPS16X_ROOTDELAY 0.0 /* nothing here */ 559#define GPS16X_BASEDELAY 0.001968 /* XXX to be fixed ! 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 560#define GPS16X_DESCRIPTION "Meinberg GPS receiver" 561#define GPS16X_MAXUNSYNC 60*60*96 /* only trust clock for 4 days 562 * @ 5e-9df/f we have accumulated 563 * at most an error of 1.73 ms 564 * (thus we move to NTP synchronisation) */ 565#define GPS16X_SPEED B19200 566#define GPS16X_CFLAG (CS8|CREAD|CLOCAL|HUPCL) 567#define GPS16X_IFLAG (IGNBRK|IGNPAR) 568#define GPS16X_OFLAG MBG_OFLAG 569#define GPS16X_LFLAG MBG_LFLAG 570#define GPS16X_POLLRATE 6 571#define GPS16X_POLLCMD "" 572#define GPS16X_CMDSIZE 0 573 574static poll_info_t gps16x_pollinfo = { GPS16X_POLLRATE, GPS16X_POLLCMD, GPS16X_CMDSIZE }; 575 576#define GPS16X_INIT gps16x_poll_init 577#define GPS16X_POLL 0 578#define GPS16X_END 0 579#define GPS16X_DATA ((void *)(&gps16x_pollinfo)) 580#define GPS16X_MESSAGE gps16x_message 581#define GPS16X_ID GPS_ID 582#define GPS16X_FORMAT "Meinberg GPS Extended" 583#define GPS16X_SAMPLES 5 584#define GPS16X_KEEP 3 585 586/* 587 * ELV DCF7000 Wallclock-Receiver/Switching Clock (Kit) 588 * 589 * This is really not the hottest clock - but before you have nothing ... 590 */ 591#define DCF7000_ROOTDELAY 0.0 /* 0 */ 592#define DCF7000_BASEDELAY 0.405 /* slow blow */ 593#define DCF7000_DESCRIPTION "ELV DCF7000" 594#define DCF7000_MAXUNSYNC (60*5) /* sorry - but it just was not build as a clock */ 595#define DCF7000_SPEED (B9600) 596#define DCF7000_CFLAG (CS8|CREAD|PARENB|PARODD|CLOCAL|HUPCL) 597#define DCF7000_IFLAG (IGNBRK) 598#define DCF7000_OFLAG 0 599#define DCF7000_LFLAG 0 600#define DCF7000_SAMPLES 5 601#define DCF7000_KEEP 3 602#define DCF7000_FORMAT "ELV DCF7000" 603 604/* 605 * Schmid DCF Receiver Kit 606 * 607 * When the WSDCF clock is operating optimally we want the primary clock 608 * distance to come out at 300 ms. Thus, peer.distance in the WSDCF peer 609 * structure is set to 290 ms and we compute delays which are at least 610 * 10 ms long. The following are 290 ms and 10 ms expressed in u_fp format 611 */ 612#define WS_POLLRATE 1 /* every second - watch interdependency with poll routine */ 613#define WS_POLLCMD "\163" 614#define WS_CMDSIZE 1 615 616static poll_info_t wsdcf_pollinfo = { WS_POLLRATE, WS_POLLCMD, WS_CMDSIZE }; 617 618#define WSDCF_INIT poll_init 619#define WSDCF_POLL poll_dpoll 620#define WSDCF_END 0 621#define WSDCF_DATA ((void *)(&wsdcf_pollinfo)) 622#define WSDCF_ROOTDELAY 0.0 /* 0 */ 623#define WSDCF_BASEDELAY 0.010 /* ~ 10ms */ 624#define WSDCF_DESCRIPTION "WS/DCF Receiver" 625#define WSDCF_FORMAT "Schmid" 626#define WSDCF_MAXUNSYNC (60*60) /* assume this beast hold at 1 h better than 2 ms XXX-must verify */ 627#define WSDCF_SPEED (B1200) 628#define WSDCF_CFLAG (CS8|CREAD|CLOCAL) 629#define WSDCF_IFLAG 0 630#define WSDCF_OFLAG 0 631#define WSDCF_LFLAG 0 632#define WSDCF_SAMPLES 5 633#define WSDCF_KEEP 3 634 635/* 636 * RAW DCF77 - input of DCF marks via RS232 - many variants 637 */ 638#define RAWDCF_FLAGS 0 639#define RAWDCF_ROOTDELAY 0.0 /* 0 */ 640#define RAWDCF_BASEDELAY 0.258 641#define RAWDCF_FORMAT "RAW DCF77 Timecode" 642#define RAWDCF_MAXUNSYNC (0) /* sorry - its a true receiver - no signal - no time */ 643#define RAWDCF_SPEED (B50) 644#ifdef NO_PARENB_IGNPAR /* Was: defined(SYS_IRIX4) || defined(SYS_IRIX5) */ 645/* somehow doesn't grok PARENB & IGNPAR (mj) */ 646# define RAWDCF_CFLAG (CS8|CREAD|CLOCAL) 647#else 648# define RAWDCF_CFLAG (CS8|CREAD|CLOCAL|PARENB) 649#endif 650#ifdef RAWDCF_NO_IGNPAR /* Was: defined(SYS_LINUX) && defined(CLOCK_RAWDCF) */ 651# define RAWDCF_IFLAG 0 652#else 653# define RAWDCF_IFLAG (IGNPAR) 654#endif 655#define RAWDCF_OFLAG 0 656#define RAWDCF_LFLAG 0 657#define RAWDCF_SAMPLES 20 658#define RAWDCF_KEEP 12 659#define RAWDCF_INIT 0 660 661/* 662 * RAW DCF variants 663 */ 664/* 665 * Conrad receiver 666 * 667 * simplest (cheapest) DCF clock - e. g. DCF77 receiver by Conrad 668 * (~40DM - roughly $30 ) followed by a level converter for RS232 669 */ 670#define CONRAD_BASEDELAY 0.292 /* Conrad receiver @ 50 Baud on a Sun */ 671#define CONRAD_DESCRIPTION "RAW DCF77 CODE (Conrad DCF77 receiver module)" 672 673/* Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0' */ 674#define GUDE_EMC_USB_V20_SPEED (B4800) 675#define GUDE_EMC_USB_V20_BASEDELAY 0.425 /* USB serial<->USB converter FTDI232R */ 676#define GUDE_EMC_USB_V20_DESCRIPTION "RAW DCF77 CODE (Expert mouseCLOCK USB v2.0)" 677 678/* 679 * TimeBrick receiver 680 */ 681#define TIMEBRICK_BASEDELAY 0.210 /* TimeBrick @ 50 Baud on a Sun */ 682#define TIMEBRICK_DESCRIPTION "RAW DCF77 CODE (TimeBrick)" 683 684/* 685 * IGEL:clock receiver 686 */ 687#define IGELCLOCK_BASEDELAY 0.258 /* IGEL:clock receiver */ 688#define IGELCLOCK_DESCRIPTION "RAW DCF77 CODE (IGEL:clock)" 689#define IGELCLOCK_SPEED (B1200) 690#define IGELCLOCK_CFLAG (CS8|CREAD|HUPCL|CLOCAL) 691 692/* 693 * RAWDCF receivers that need to be powered from DTR 694 * (like Expert mouse clock) 695 */ 696static int rawdcf_init_1 (struct parseunit *); 697#define RAWDCFDTRSET_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR)" 698#define RAWDCFDTRSET75_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR @ 75 baud)" 699#define RAWDCFDTRSET_INIT rawdcf_init_1 700 701/* 702 * RAWDCF receivers that need to be powered from 703 * DTR CLR and RTS SET 704 */ 705static int rawdcf_init_2 (struct parseunit *); 706#define RAWDCFDTRCLRRTSSET_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET)" 707#define RAWDCFDTRCLRRTSSET75_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET @ 75 baud)" 708#define RAWDCFDTRCLRRTSSET_INIT rawdcf_init_2 709 710/* 711 * Trimble GPS receivers (TAIP and TSIP protocols) 712 */ 713#ifndef TRIM_POLLRATE 714#define TRIM_POLLRATE 0 /* only true direct polling */ 715#endif 716 717#define TRIM_TAIPPOLLCMD ">SRM;FR_FLAG=F;EC_FLAG=F<>QTM<" 718#define TRIM_TAIPCMDSIZE (sizeof(TRIM_TAIPPOLLCMD)-1) 719 720static poll_info_t trimbletaip_pollinfo = { TRIM_POLLRATE, TRIM_TAIPPOLLCMD, TRIM_TAIPCMDSIZE }; 721static int trimbletaip_init (struct parseunit *); 722static void trimbletaip_event (struct parseunit *, int); 723 724/* query time & UTC correction data */ 725static char tsipquery[] = { DLE, 0x21, DLE, ETX, DLE, 0x2F, DLE, ETX }; 726 727static poll_info_t trimbletsip_pollinfo = { TRIM_POLLRATE, tsipquery, sizeof(tsipquery) }; 728static int trimbletsip_init (struct parseunit *); 729static void trimbletsip_end (struct parseunit *); 730static void trimbletsip_message (struct parseunit *, parsetime_t *); 731static void trimbletsip_event (struct parseunit *, int); 732 733#define TRIMBLETSIP_IDLE_TIME (300) /* 5 minutes silence at most */ 734#define TRIMBLE_RESET_HOLDOFF TRIMBLETSIP_IDLE_TIME 735 736#define TRIMBLETAIP_SPEED (B4800) 737#define TRIMBLETAIP_CFLAG (CS8|CREAD|CLOCAL) 738#define TRIMBLETAIP_IFLAG (BRKINT|IGNPAR|ISTRIP|ICRNL|IXON) 739#define TRIMBLETAIP_OFLAG (OPOST|ONLCR) 740#define TRIMBLETAIP_LFLAG (0) 741 742#define TRIMBLETSIP_SPEED (B9600) 743#define TRIMBLETSIP_CFLAG (CS8|CLOCAL|CREAD|PARENB|PARODD) 744#define TRIMBLETSIP_IFLAG (IGNBRK) 745#define TRIMBLETSIP_OFLAG (0) 746#define TRIMBLETSIP_LFLAG (ICANON) 747 748#define TRIMBLETSIP_SAMPLES 5 749#define TRIMBLETSIP_KEEP 3 750#define TRIMBLETAIP_SAMPLES 5 751#define TRIMBLETAIP_KEEP 3 752 753#define TRIMBLETAIP_FLAGS (PARSE_F_PPSONSECOND) 754#define TRIMBLETSIP_FLAGS (TRIMBLETAIP_FLAGS) 755 756#define TRIMBLETAIP_POLL poll_dpoll 757#define TRIMBLETSIP_POLL poll_dpoll 758 759#define TRIMBLETAIP_INIT trimbletaip_init 760#define TRIMBLETSIP_INIT trimbletsip_init 761 762#define TRIMBLETAIP_EVENT trimbletaip_event 763 764#define TRIMBLETSIP_EVENT trimbletsip_event 765#define TRIMBLETSIP_MESSAGE trimbletsip_message 766 767#define TRIMBLETAIP_END 0 768#define TRIMBLETSIP_END trimbletsip_end 769 770#define TRIMBLETAIP_DATA ((void *)(&trimbletaip_pollinfo)) 771#define TRIMBLETSIP_DATA ((void *)(&trimbletsip_pollinfo)) 772 773#define TRIMBLETAIP_ID GPS_ID 774#define TRIMBLETSIP_ID GPS_ID 775 776#define TRIMBLETAIP_FORMAT "Trimble TAIP" 777#define TRIMBLETSIP_FORMAT "Trimble TSIP" 778 779#define TRIMBLETAIP_ROOTDELAY 0x0 780#define TRIMBLETSIP_ROOTDELAY 0x0 781 782#define TRIMBLETAIP_BASEDELAY 0.0 783#define TRIMBLETSIP_BASEDELAY 0.020 /* GPS time message latency */ 784 785#define TRIMBLETAIP_DESCRIPTION "Trimble GPS (TAIP) receiver" 786#define TRIMBLETSIP_DESCRIPTION "Trimble GPS (TSIP) receiver" 787 788#define TRIMBLETAIP_MAXUNSYNC 0 789#define TRIMBLETSIP_MAXUNSYNC 0 790 791#define TRIMBLETAIP_EOL '<' 792 793/* 794 * RadioCode Clocks RCC 800 receiver 795 */ 796#define RCC_POLLRATE 0 /* only true direct polling */ 797#define RCC_POLLCMD "\r" 798#define RCC_CMDSIZE 1 799 800static poll_info_t rcc8000_pollinfo = { RCC_POLLRATE, RCC_POLLCMD, RCC_CMDSIZE }; 801#define RCC8000_FLAGS 0 802#define RCC8000_POLL poll_dpoll 803#define RCC8000_INIT poll_init 804#define RCC8000_END 0 805#define RCC8000_DATA ((void *)(&rcc8000_pollinfo)) 806#define RCC8000_ROOTDELAY 0.0 807#define RCC8000_BASEDELAY 0.0 808#define RCC8000_ID "MSF" 809#define RCC8000_DESCRIPTION "RCC 8000 MSF Receiver" 810#define RCC8000_FORMAT "Radiocode RCC8000" 811#define RCC8000_MAXUNSYNC (60*60) /* should be ok for an hour */ 812#define RCC8000_SPEED (B2400) 813#define RCC8000_CFLAG (CS8|CREAD|CLOCAL) 814#define RCC8000_IFLAG (IGNBRK|IGNPAR) 815#define RCC8000_OFLAG 0 816#define RCC8000_LFLAG 0 817#define RCC8000_SAMPLES 5 818#define RCC8000_KEEP 3 819 820/* 821 * Hopf Radio clock 6021 Format 822 * 823 */ 824#define HOPF6021_ROOTDELAY 0.0 825#define HOPF6021_BASEDELAY 0.0 826#define HOPF6021_DESCRIPTION "HOPF 6021" 827#define HOPF6021_FORMAT "hopf Funkuhr 6021" 828#define HOPF6021_MAXUNSYNC (60*60) /* should be ok for an hour */ 829#define HOPF6021_SPEED (B9600) 830#define HOPF6021_CFLAG (CS8|CREAD|CLOCAL) 831#define HOPF6021_IFLAG (IGNBRK|ISTRIP) 832#define HOPF6021_OFLAG 0 833#define HOPF6021_LFLAG 0 834#define HOPF6021_FLAGS 0 835#define HOPF6021_SAMPLES 5 836#define HOPF6021_KEEP 3 837 838/* 839 * Diem's Computime Radio Clock Receiver 840 */ 841#define COMPUTIME_FLAGS 0 842#define COMPUTIME_ROOTDELAY 0.0 843#define COMPUTIME_BASEDELAY 0.0 844#define COMPUTIME_ID DCF_ID 845#define COMPUTIME_DESCRIPTION "Diem's Computime receiver" 846#define COMPUTIME_FORMAT "Diem's Computime Radio Clock" 847#define COMPUTIME_TYPE DCF_TYPE 848#define COMPUTIME_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ 849#define COMPUTIME_SPEED (B9600) 850#define COMPUTIME_CFLAG (CSTOPB|CS7|CREAD|CLOCAL) 851#define COMPUTIME_IFLAG (IGNBRK|IGNPAR|ISTRIP) 852#define COMPUTIME_OFLAG 0 853#define COMPUTIME_LFLAG 0 854#define COMPUTIME_SAMPLES 5 855#define COMPUTIME_KEEP 3 856 857/* 858 * Varitext Radio Clock Receiver 859 */ 860#define VARITEXT_FLAGS 0 861#define VARITEXT_ROOTDELAY 0.0 862#define VARITEXT_BASEDELAY 0.0 863#define VARITEXT_ID "MSF" 864#define VARITEXT_DESCRIPTION "Varitext receiver" 865#define VARITEXT_FORMAT "Varitext Radio Clock" 866#define VARITEXT_TYPE DCF_TYPE 867#define VARITEXT_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ 868#define VARITEXT_SPEED (B9600) 869#define VARITEXT_CFLAG (CS7|CREAD|CLOCAL|PARENB|PARODD) 870#define VARITEXT_IFLAG (IGNPAR|IGNBRK|INPCK) /*|ISTRIP)*/ 871#define VARITEXT_OFLAG 0 872#define VARITEXT_LFLAG 0 873#define VARITEXT_SAMPLES 32 874#define VARITEXT_KEEP 20 875 876/* 877 * SEL240x Satellite Sychronized Clock 878 */ 879#define SEL240X_POLLRATE 0 /* only true direct polling */ 880#define SEL240X_POLLCMD "BUB8" 881#define SEL240X_CMDSIZE 4 882 883static poll_info_t sel240x_pollinfo = { SEL240X_POLLRATE, 884 SEL240X_POLLCMD, 885 SEL240X_CMDSIZE }; 886#define SEL240X_FLAGS (PARSE_F_PPSONSECOND) 887#define SEL240X_POLL poll_dpoll 888#define SEL240X_INIT poll_init 889#define SEL240X_END 0 890#define SEL240X_DATA ((void *)(&sel240x_pollinfo)) 891#define SEL240X_ROOTDELAY 0.0 892#define SEL240X_BASEDELAY 0.0 893#define SEL240X_ID GPS_ID 894#define SEL240X_DESCRIPTION "SEL240x Satellite Synchronized Clock" 895#define SEL240X_FORMAT "SEL B8" 896#define SEL240X_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours */ 897#define SEL240X_SPEED (B9600) 898#define SEL240X_CFLAG (CS8|CREAD|CLOCAL) 899#define SEL240X_IFLAG (IGNBRK|IGNPAR) 900#define SEL240X_OFLAG (0) 901#define SEL240X_LFLAG (0) 902#define SEL240X_SAMPLES 5 903#define SEL240X_KEEP 3 904 905static struct parse_clockinfo 906{ 907 u_long cl_flags; /* operation flags (PPS interpretation, trust handling) */ 908 void (*cl_poll) (struct parseunit *); /* active poll routine */ 909 int (*cl_init) (struct parseunit *); /* active poll init routine */ 910 void (*cl_event) (struct parseunit *, int); /* special event handling (e.g. reset clock) */ 911 void (*cl_end) (struct parseunit *); /* active poll end routine */ 912 void (*cl_message) (struct parseunit *, parsetime_t *); /* process a lower layer message */ 913 void *cl_data; /* local data area for "poll" mechanism */ 914 double cl_rootdelay; /* rootdelay */ 915 double cl_basedelay; /* current offset by which the RS232 916 time code is delayed from the actual time */ 917 const char *cl_id; /* ID code */ 918 const char *cl_description; /* device name */ 919 const char *cl_format; /* fixed format */ 920 u_char cl_type; /* clock type (ntp control) */ 921 u_long cl_maxunsync; /* time to trust oscillator after losing synch */ 922 u_long cl_speed; /* terminal input & output baudrate */ 923 u_long cl_cflag; /* terminal control flags */ 924 u_long cl_iflag; /* terminal input flags */ 925 u_long cl_oflag; /* terminal output flags */ 926 u_long cl_lflag; /* terminal local flags */ 927 u_long cl_samples; /* samples for median filter */ 928 u_long cl_keep; /* samples for median filter to keep */ 929} parse_clockinfo[] = 930{ 931 { /* mode 0 */ 932 MBG_FLAGS, 933 NO_POLL, 934 NO_INIT, 935 NO_EVENT, 936 NO_END, 937 NO_MESSAGE, 938 NO_LCLDATA, 939 DCFPZF535_ROOTDELAY, 940 DCFPZF535_BASEDELAY, 941 DCF_P_ID, 942 DCFPZF535_DESCRIPTION, 943 DCFPZF535_FORMAT, 944 DCF_TYPE, 945 DCFPZF535_MAXUNSYNC, 946 DCFPZF535_SPEED, 947 DCFPZF535_CFLAG, 948 DCFPZF535_IFLAG, 949 DCFPZF535_OFLAG, 950 DCFPZF535_LFLAG, 951 DCFPZF535_SAMPLES, 952 DCFPZF535_KEEP 953 }, 954 { /* mode 1 */ 955 MBG_FLAGS, 956 NO_POLL, 957 NO_INIT, 958 NO_EVENT, 959 NO_END, 960 NO_MESSAGE, 961 NO_LCLDATA, 962 DCFPZF535OCXO_ROOTDELAY, 963 DCFPZF535OCXO_BASEDELAY, 964 DCF_P_ID, 965 DCFPZF535OCXO_DESCRIPTION, 966 DCFPZF535OCXO_FORMAT, 967 DCF_TYPE, 968 DCFPZF535OCXO_MAXUNSYNC, 969 DCFPZF535OCXO_SPEED, 970 DCFPZF535OCXO_CFLAG, 971 DCFPZF535OCXO_IFLAG, 972 DCFPZF535OCXO_OFLAG, 973 DCFPZF535OCXO_LFLAG, 974 DCFPZF535OCXO_SAMPLES, 975 DCFPZF535OCXO_KEEP 976 }, 977 { /* mode 2 */ 978 MBG_FLAGS, 979 NO_POLL, 980 NO_INIT, 981 NO_EVENT, 982 NO_END, 983 NO_MESSAGE, 984 NO_LCLDATA, 985 DCFUA31_ROOTDELAY, 986 DCFUA31_BASEDELAY, 987 DCF_A_ID, 988 DCFUA31_DESCRIPTION, 989 DCFUA31_FORMAT, 990 DCF_TYPE, 991 DCFUA31_MAXUNSYNC, 992 DCFUA31_SPEED, 993 DCFUA31_CFLAG, 994 DCFUA31_IFLAG, 995 DCFUA31_OFLAG, 996 DCFUA31_LFLAG, 997 DCFUA31_SAMPLES, 998 DCFUA31_KEEP 999 }, 1000 { /* mode 3 */ 1001 MBG_FLAGS, 1002 NO_POLL, 1003 NO_INIT, 1004 NO_EVENT, 1005 NO_END, 1006 NO_MESSAGE, 1007 NO_LCLDATA, 1008 DCF7000_ROOTDELAY, 1009 DCF7000_BASEDELAY, 1010 DCF_A_ID, 1011 DCF7000_DESCRIPTION, 1012 DCF7000_FORMAT, 1013 DCF_TYPE, 1014 DCF7000_MAXUNSYNC, 1015 DCF7000_SPEED, 1016 DCF7000_CFLAG, 1017 DCF7000_IFLAG, 1018 DCF7000_OFLAG, 1019 DCF7000_LFLAG, 1020 DCF7000_SAMPLES, 1021 DCF7000_KEEP 1022 }, 1023 { /* mode 4 */ 1024 NO_CL_FLAGS, 1025 WSDCF_POLL, 1026 WSDCF_INIT, 1027 NO_EVENT, 1028 WSDCF_END, 1029 NO_MESSAGE, 1030 WSDCF_DATA, 1031 WSDCF_ROOTDELAY, 1032 WSDCF_BASEDELAY, 1033 DCF_A_ID, 1034 WSDCF_DESCRIPTION, 1035 WSDCF_FORMAT, 1036 DCF_TYPE, 1037 WSDCF_MAXUNSYNC, 1038 WSDCF_SPEED, 1039 WSDCF_CFLAG, 1040 WSDCF_IFLAG, 1041 WSDCF_OFLAG, 1042 WSDCF_LFLAG, 1043 WSDCF_SAMPLES, 1044 WSDCF_KEEP 1045 }, 1046 { /* mode 5 */ 1047 RAWDCF_FLAGS, 1048 NO_POLL, 1049 RAWDCF_INIT, 1050 NO_EVENT, 1051 NO_END, 1052 NO_MESSAGE, 1053 NO_LCLDATA, 1054 RAWDCF_ROOTDELAY, 1055 CONRAD_BASEDELAY, 1056 DCF_A_ID, 1057 CONRAD_DESCRIPTION, 1058 RAWDCF_FORMAT, 1059 DCF_TYPE, 1060 RAWDCF_MAXUNSYNC, 1061 RAWDCF_SPEED, 1062 RAWDCF_CFLAG, 1063 RAWDCF_IFLAG, 1064 RAWDCF_OFLAG, 1065 RAWDCF_LFLAG, 1066 RAWDCF_SAMPLES, 1067 RAWDCF_KEEP 1068 }, 1069 { /* mode 6 */ 1070 RAWDCF_FLAGS, 1071 NO_POLL, 1072 RAWDCF_INIT, 1073 NO_EVENT, 1074 NO_END, 1075 NO_MESSAGE, 1076 NO_LCLDATA, 1077 RAWDCF_ROOTDELAY, 1078 TIMEBRICK_BASEDELAY, 1079 DCF_A_ID, 1080 TIMEBRICK_DESCRIPTION, 1081 RAWDCF_FORMAT, 1082 DCF_TYPE, 1083 RAWDCF_MAXUNSYNC, 1084 RAWDCF_SPEED, 1085 RAWDCF_CFLAG, 1086 RAWDCF_IFLAG, 1087 RAWDCF_OFLAG, 1088 RAWDCF_LFLAG, 1089 RAWDCF_SAMPLES, 1090 RAWDCF_KEEP 1091 }, 1092 { /* mode 7 */ 1093 MBG_FLAGS, 1094 GPS16X_POLL, 1095 GPS16X_INIT, 1096 NO_EVENT, 1097 GPS16X_END, 1098 GPS16X_MESSAGE, 1099 GPS16X_DATA, 1100 GPS16X_ROOTDELAY, 1101 GPS16X_BASEDELAY, 1102 GPS16X_ID, 1103 GPS16X_DESCRIPTION, 1104 GPS16X_FORMAT, 1105 GPS_TYPE, 1106 GPS16X_MAXUNSYNC, 1107 GPS16X_SPEED, 1108 GPS16X_CFLAG, 1109 GPS16X_IFLAG, 1110 GPS16X_OFLAG, 1111 GPS16X_LFLAG, 1112 GPS16X_SAMPLES, 1113 GPS16X_KEEP 1114 }, 1115 { /* mode 8 */ 1116 RAWDCF_FLAGS, 1117 NO_POLL, 1118 NO_INIT, 1119 NO_EVENT, 1120 NO_END, 1121 NO_MESSAGE, 1122 NO_LCLDATA, 1123 RAWDCF_ROOTDELAY, 1124 IGELCLOCK_BASEDELAY, 1125 DCF_A_ID, 1126 IGELCLOCK_DESCRIPTION, 1127 RAWDCF_FORMAT, 1128 DCF_TYPE, 1129 RAWDCF_MAXUNSYNC, 1130 IGELCLOCK_SPEED, 1131 IGELCLOCK_CFLAG, 1132 RAWDCF_IFLAG, 1133 RAWDCF_OFLAG, 1134 RAWDCF_LFLAG, 1135 RAWDCF_SAMPLES, 1136 RAWDCF_KEEP 1137 }, 1138 { /* mode 9 */ 1139 TRIMBLETAIP_FLAGS, 1140#if TRIM_POLLRATE /* DHD940515: Allow user config */ 1141 NO_POLL, 1142#else 1143 TRIMBLETAIP_POLL, 1144#endif 1145 TRIMBLETAIP_INIT, 1146 TRIMBLETAIP_EVENT, 1147 TRIMBLETAIP_END, 1148 NO_MESSAGE, 1149 TRIMBLETAIP_DATA, 1150 TRIMBLETAIP_ROOTDELAY, 1151 TRIMBLETAIP_BASEDELAY, 1152 TRIMBLETAIP_ID, 1153 TRIMBLETAIP_DESCRIPTION, 1154 TRIMBLETAIP_FORMAT, 1155 GPS_TYPE, 1156 TRIMBLETAIP_MAXUNSYNC, 1157 TRIMBLETAIP_SPEED, 1158 TRIMBLETAIP_CFLAG, 1159 TRIMBLETAIP_IFLAG, 1160 TRIMBLETAIP_OFLAG, 1161 TRIMBLETAIP_LFLAG, 1162 TRIMBLETAIP_SAMPLES, 1163 TRIMBLETAIP_KEEP 1164 }, 1165 { /* mode 10 */ 1166 TRIMBLETSIP_FLAGS, 1167#if TRIM_POLLRATE /* DHD940515: Allow user config */ 1168 NO_POLL, 1169#else 1170 TRIMBLETSIP_POLL, 1171#endif 1172 TRIMBLETSIP_INIT, 1173 TRIMBLETSIP_EVENT, 1174 TRIMBLETSIP_END, 1175 TRIMBLETSIP_MESSAGE, 1176 TRIMBLETSIP_DATA, 1177 TRIMBLETSIP_ROOTDELAY, 1178 TRIMBLETSIP_BASEDELAY, 1179 TRIMBLETSIP_ID, 1180 TRIMBLETSIP_DESCRIPTION, 1181 TRIMBLETSIP_FORMAT, 1182 GPS_TYPE, 1183 TRIMBLETSIP_MAXUNSYNC, 1184 TRIMBLETSIP_SPEED, 1185 TRIMBLETSIP_CFLAG, 1186 TRIMBLETSIP_IFLAG, 1187 TRIMBLETSIP_OFLAG, 1188 TRIMBLETSIP_LFLAG, 1189 TRIMBLETSIP_SAMPLES, 1190 TRIMBLETSIP_KEEP 1191 }, 1192 { /* mode 11 */ 1193 NO_CL_FLAGS, 1194 RCC8000_POLL, 1195 RCC8000_INIT, 1196 NO_EVENT, 1197 RCC8000_END, 1198 NO_MESSAGE, 1199 RCC8000_DATA, 1200 RCC8000_ROOTDELAY, 1201 RCC8000_BASEDELAY, 1202 RCC8000_ID, 1203 RCC8000_DESCRIPTION, 1204 RCC8000_FORMAT, 1205 DCF_TYPE, 1206 RCC8000_MAXUNSYNC, 1207 RCC8000_SPEED, 1208 RCC8000_CFLAG, 1209 RCC8000_IFLAG, 1210 RCC8000_OFLAG, 1211 RCC8000_LFLAG, 1212 RCC8000_SAMPLES, 1213 RCC8000_KEEP 1214 }, 1215 { /* mode 12 */ 1216 HOPF6021_FLAGS, 1217 NO_POLL, 1218 NO_INIT, 1219 NO_EVENT, 1220 NO_END, 1221 NO_MESSAGE, 1222 NO_LCLDATA, 1223 HOPF6021_ROOTDELAY, 1224 HOPF6021_BASEDELAY, 1225 DCF_ID, 1226 HOPF6021_DESCRIPTION, 1227 HOPF6021_FORMAT, 1228 DCF_TYPE, 1229 HOPF6021_MAXUNSYNC, 1230 HOPF6021_SPEED, 1231 HOPF6021_CFLAG, 1232 HOPF6021_IFLAG, 1233 HOPF6021_OFLAG, 1234 HOPF6021_LFLAG, 1235 HOPF6021_SAMPLES, 1236 HOPF6021_KEEP 1237 }, 1238 { /* mode 13 */ 1239 COMPUTIME_FLAGS, 1240 NO_POLL, 1241 NO_INIT, 1242 NO_EVENT, 1243 NO_END, 1244 NO_MESSAGE, 1245 NO_LCLDATA, 1246 COMPUTIME_ROOTDELAY, 1247 COMPUTIME_BASEDELAY, 1248 COMPUTIME_ID, 1249 COMPUTIME_DESCRIPTION, 1250 COMPUTIME_FORMAT, 1251 COMPUTIME_TYPE, 1252 COMPUTIME_MAXUNSYNC, 1253 COMPUTIME_SPEED, 1254 COMPUTIME_CFLAG, 1255 COMPUTIME_IFLAG, 1256 COMPUTIME_OFLAG, 1257 COMPUTIME_LFLAG, 1258 COMPUTIME_SAMPLES, 1259 COMPUTIME_KEEP 1260 }, 1261 { /* mode 14 */ 1262 RAWDCF_FLAGS, 1263 NO_POLL, 1264 RAWDCFDTRSET_INIT, 1265 NO_EVENT, 1266 NO_END, 1267 NO_MESSAGE, 1268 NO_LCLDATA, 1269 RAWDCF_ROOTDELAY, 1270 RAWDCF_BASEDELAY, 1271 DCF_A_ID, 1272 RAWDCFDTRSET_DESCRIPTION, 1273 RAWDCF_FORMAT, 1274 DCF_TYPE, 1275 RAWDCF_MAXUNSYNC, 1276 RAWDCF_SPEED, 1277 RAWDCF_CFLAG, 1278 RAWDCF_IFLAG, 1279 RAWDCF_OFLAG, 1280 RAWDCF_LFLAG, 1281 RAWDCF_SAMPLES, 1282 RAWDCF_KEEP 1283 }, 1284 { /* mode 15 */ 1285 0, /* operation flags (io modes) */ 1286 NO_POLL, /* active poll routine */ 1287 NO_INIT, /* active poll init routine */ 1288 NO_EVENT, /* special event handling (e.g. reset clock) */ 1289 NO_END, /* active poll end routine */ 1290 NO_MESSAGE, /* process a lower layer message */ 1291 NO_LCLDATA, /* local data area for "poll" mechanism */ 1292 0, /* rootdelay */ 1293 11.0 /* bits */ / 9600, /* current offset by which the RS232 1294 time code is delayed from the actual time */ 1295 DCF_ID, /* ID code */ 1296 "WHARTON 400A Series clock", /* device name */ 1297 "WHARTON 400A Series clock Output Format 1", /* fixed format */ 1298 /* Must match a format-name in a libparse/clk_xxx.c file */ 1299 DCF_TYPE, /* clock type (ntp control) */ 1300 (1*60*60), /* time to trust oscillator after losing synch */ 1301 B9600, /* terminal input & output baudrate */ 1302 (CS8|CREAD|PARENB|CLOCAL|HUPCL),/* terminal control flags */ 1303 0, /* terminal input flags */ 1304 0, /* terminal output flags */ 1305 0, /* terminal local flags */ 1306 5, /* samples for median filter */ 1307 3, /* samples for median filter to keep */ 1308 }, 1309 { /* mode 16 - RAWDCF RTS set, DTR clr */ 1310 RAWDCF_FLAGS, 1311 NO_POLL, 1312 RAWDCFDTRCLRRTSSET_INIT, 1313 NO_EVENT, 1314 NO_END, 1315 NO_MESSAGE, 1316 NO_LCLDATA, 1317 RAWDCF_ROOTDELAY, 1318 RAWDCF_BASEDELAY, 1319 DCF_A_ID, 1320 RAWDCFDTRCLRRTSSET_DESCRIPTION, 1321 RAWDCF_FORMAT, 1322 DCF_TYPE, 1323 RAWDCF_MAXUNSYNC, 1324 RAWDCF_SPEED, 1325 RAWDCF_CFLAG, 1326 RAWDCF_IFLAG, 1327 RAWDCF_OFLAG, 1328 RAWDCF_LFLAG, 1329 RAWDCF_SAMPLES, 1330 RAWDCF_KEEP 1331 }, 1332 { /* mode 17 */ 1333 VARITEXT_FLAGS, 1334 NO_POLL, 1335 NO_INIT, 1336 NO_EVENT, 1337 NO_END, 1338 NO_MESSAGE, 1339 NO_LCLDATA, 1340 VARITEXT_ROOTDELAY, 1341 VARITEXT_BASEDELAY, 1342 VARITEXT_ID, 1343 VARITEXT_DESCRIPTION, 1344 VARITEXT_FORMAT, 1345 VARITEXT_TYPE, 1346 VARITEXT_MAXUNSYNC, 1347 VARITEXT_SPEED, 1348 VARITEXT_CFLAG, 1349 VARITEXT_IFLAG, 1350 VARITEXT_OFLAG, 1351 VARITEXT_LFLAG, 1352 VARITEXT_SAMPLES, 1353 VARITEXT_KEEP 1354 }, 1355 { /* mode 18 */ 1356 MBG_FLAGS, 1357 NO_POLL, 1358 NO_INIT, 1359 NO_EVENT, 1360 GPS16X_END, 1361 GPS16X_MESSAGE, 1362 GPS16X_DATA, 1363 GPS16X_ROOTDELAY, 1364 GPS16X_BASEDELAY, 1365 GPS16X_ID, 1366 GPS16X_DESCRIPTION, 1367 GPS16X_FORMAT, 1368 GPS_TYPE, 1369 GPS16X_MAXUNSYNC, 1370 GPS16X_SPEED, 1371 GPS16X_CFLAG, 1372 GPS16X_IFLAG, 1373 GPS16X_OFLAG, 1374 GPS16X_LFLAG, 1375 GPS16X_SAMPLES, 1376 GPS16X_KEEP 1377 }, 1378 { /* mode 19 */ 1379 RAWDCF_FLAGS, 1380 NO_POLL, 1381 RAWDCF_INIT, 1382 NO_EVENT, 1383 NO_END, 1384 NO_MESSAGE, 1385 NO_LCLDATA, 1386 RAWDCF_ROOTDELAY, 1387 GUDE_EMC_USB_V20_BASEDELAY, 1388 DCF_A_ID, 1389 GUDE_EMC_USB_V20_DESCRIPTION, 1390 RAWDCF_FORMAT, 1391 DCF_TYPE, 1392 RAWDCF_MAXUNSYNC, 1393 GUDE_EMC_USB_V20_SPEED, 1394 RAWDCF_CFLAG, 1395 RAWDCF_IFLAG, 1396 RAWDCF_OFLAG, 1397 RAWDCF_LFLAG, 1398 RAWDCF_SAMPLES, 1399 RAWDCF_KEEP 1400 }, 1401 { /* mode 20, like mode 14 but driven by 75 baud */ 1402 RAWDCF_FLAGS, 1403 NO_POLL, 1404 RAWDCFDTRSET_INIT, 1405 NO_EVENT, 1406 NO_END, 1407 NO_MESSAGE, 1408 NO_LCLDATA, 1409 RAWDCF_ROOTDELAY, 1410 RAWDCF_BASEDELAY, 1411 DCF_A_ID, 1412 RAWDCFDTRSET75_DESCRIPTION, 1413 RAWDCF_FORMAT, 1414 DCF_TYPE, 1415 RAWDCF_MAXUNSYNC, 1416 B75, 1417 RAWDCF_CFLAG, 1418 RAWDCF_IFLAG, 1419 RAWDCF_OFLAG, 1420 RAWDCF_LFLAG, 1421 RAWDCF_SAMPLES, 1422 RAWDCF_KEEP 1423 }, 1424 { /* mode 21, like mode 16 but driven by 75 baud 1425 - RAWDCF RTS set, DTR clr */ 1426 RAWDCF_FLAGS, 1427 NO_POLL, 1428 RAWDCFDTRCLRRTSSET_INIT, 1429 NO_EVENT, 1430 NO_END, 1431 NO_MESSAGE, 1432 NO_LCLDATA, 1433 RAWDCF_ROOTDELAY, 1434 RAWDCF_BASEDELAY, 1435 DCF_A_ID, 1436 RAWDCFDTRCLRRTSSET75_DESCRIPTION, 1437 RAWDCF_FORMAT, 1438 DCF_TYPE, 1439 RAWDCF_MAXUNSYNC, 1440 B75, 1441 RAWDCF_CFLAG, 1442 RAWDCF_IFLAG, 1443 RAWDCF_OFLAG, 1444 RAWDCF_LFLAG, 1445 RAWDCF_SAMPLES, 1446 RAWDCF_KEEP 1447 }, 1448 { /* mode 22 - like 2 with POWERUP trust */ 1449 MBG_FLAGS | PARSE_F_POWERUPTRUST, 1450 NO_POLL, 1451 NO_INIT, 1452 NO_EVENT, 1453 NO_END, 1454 NO_MESSAGE, 1455 NO_LCLDATA, 1456 DCFUA31_ROOTDELAY, 1457 DCFUA31_BASEDELAY, 1458 DCF_A_ID, 1459 DCFUA31_DESCRIPTION, 1460 DCFUA31_FORMAT, 1461 DCF_TYPE, 1462 DCFUA31_MAXUNSYNC, 1463 DCFUA31_SPEED, 1464 DCFUA31_CFLAG, 1465 DCFUA31_IFLAG, 1466 DCFUA31_OFLAG, 1467 DCFUA31_LFLAG, 1468 DCFUA31_SAMPLES, 1469 DCFUA31_KEEP 1470 }, 1471 { /* mode 23 - like 7 with POWERUP trust */ 1472 MBG_FLAGS | PARSE_F_POWERUPTRUST, 1473 GPS16X_POLL, 1474 GPS16X_INIT, 1475 NO_EVENT, 1476 GPS16X_END, 1477 GPS16X_MESSAGE, 1478 GPS16X_DATA, 1479 GPS16X_ROOTDELAY, 1480 GPS16X_BASEDELAY, 1481 GPS16X_ID, 1482 GPS16X_DESCRIPTION, 1483 GPS16X_FORMAT, 1484 GPS_TYPE, 1485 GPS16X_MAXUNSYNC, 1486 GPS16X_SPEED, 1487 GPS16X_CFLAG, 1488 GPS16X_IFLAG, 1489 GPS16X_OFLAG, 1490 GPS16X_LFLAG, 1491 GPS16X_SAMPLES, 1492 GPS16X_KEEP 1493 }, 1494 { /* mode 24 */ 1495 SEL240X_FLAGS, 1496 SEL240X_POLL, 1497 SEL240X_INIT, 1498 NO_EVENT, 1499 SEL240X_END, 1500 NO_MESSAGE, 1501 SEL240X_DATA, 1502 SEL240X_ROOTDELAY, 1503 SEL240X_BASEDELAY, 1504 SEL240X_ID, 1505 SEL240X_DESCRIPTION, 1506 SEL240X_FORMAT, 1507 GPS_TYPE, 1508 SEL240X_MAXUNSYNC, 1509 SEL240X_SPEED, 1510 SEL240X_CFLAG, 1511 SEL240X_IFLAG, 1512 SEL240X_OFLAG, 1513 SEL240X_LFLAG, 1514 SEL240X_SAMPLES, 1515 SEL240X_KEEP 1516 }, 1517}; 1518 1519static int ncltypes = sizeof(parse_clockinfo) / sizeof(struct parse_clockinfo); 1520 1521#define CLK_REALTYPE(x) ((int)(((x)->ttl) & 0x7F)) 1522#define CLK_TYPE(x) ((CLK_REALTYPE(x) >= ncltypes) ? ~0 : CLK_REALTYPE(x)) 1523#define CLK_UNIT(x) ((int)REFCLOCKUNIT(&(x)->srcadr)) 1524#define CLK_PPS(x) (((x)->ttl) & 0x80) 1525 1526/* 1527 * Other constant stuff 1528 */ 1529#define PARSEHSREFID 0x7f7f08ff /* 127.127.8.255 refid for hi strata */ 1530 1531#define PARSESTATISTICS (60*60) /* output state statistics every hour */ 1532 1533static int notice = 0; 1534 1535#define PARSE_STATETIME(parse, i) ((parse->generic->currentstatus == i) ? parse->statetime[i] + current_time - parse->lastchange : parse->statetime[i]) 1536 1537static void parse_event (struct parseunit *, int); 1538static void parse_process (struct parseunit *, parsetime_t *); 1539static void clear_err (struct parseunit *, u_long); 1540static int list_err (struct parseunit *, u_long); 1541static char * l_mktime (u_long); 1542 1543/**=========================================================================== 1544 ** implementation error message regression module 1545 **/ 1546static void 1547clear_err( 1548 struct parseunit *parse, 1549 u_long lstate 1550 ) 1551{ 1552 if (lstate == ERR_ALL) 1553 { 1554 size_t i; 1555 1556 for (i = 0; i < ERR_CNT; i++) 1557 { 1558 parse->errors[i].err_stage = err_tbl[i]; 1559 parse->errors[i].err_cnt = 0; 1560 parse->errors[i].err_last = 0; 1561 parse->errors[i].err_started = 0; 1562 parse->errors[i].err_suppressed = 0; 1563 } 1564 } 1565 else 1566 { 1567 parse->errors[lstate].err_stage = err_tbl[lstate]; 1568 parse->errors[lstate].err_cnt = 0; 1569 parse->errors[lstate].err_last = 0; 1570 parse->errors[lstate].err_started = 0; 1571 parse->errors[lstate].err_suppressed = 0; 1572 } 1573} 1574 1575static int 1576list_err( 1577 struct parseunit *parse, 1578 u_long lstate 1579 ) 1580{ 1581 int do_it; 1582 struct errorinfo *err = &parse->errors[lstate]; 1583 1584 if (err->err_started == 0) 1585 { 1586 err->err_started = current_time; 1587 } 1588 1589 do_it = (current_time - err->err_last) >= err->err_stage->err_delay; 1590 1591 if (do_it) 1592 err->err_cnt++; 1593 1594 if (err->err_stage->err_count && 1595 (err->err_cnt >= err->err_stage->err_count)) 1596 { 1597 err->err_stage++; 1598 err->err_cnt = 0; 1599 } 1600 1601 if (!err->err_cnt && do_it) 1602 msyslog(LOG_INFO, "PARSE receiver #%d: interval for following error message class is at least %s", 1603 CLK_UNIT(parse->peer), l_mktime(err->err_stage->err_delay)); 1604 1605 if (!do_it) 1606 err->err_suppressed++; 1607 else 1608 err->err_last = current_time; 1609 1610 if (do_it && err->err_suppressed) 1611 { 1612 msyslog(LOG_INFO, "PARSE receiver #%d: %ld message%s suppressed, error condition class persists for %s", 1613 CLK_UNIT(parse->peer), err->err_suppressed, (err->err_suppressed == 1) ? " was" : "s where", 1614 l_mktime(current_time - err->err_started)); 1615 err->err_suppressed = 0; 1616 } 1617 1618 return do_it; 1619} 1620 1621/*-------------------------------------------------- 1622 * mkreadable - make a printable ascii string (without 1623 * embedded quotes so that the ntpq protocol isn't 1624 * fooled 1625 */ 1626#ifndef isprint 1627#define isprint(_X_) (((_X_) > 0x1F) && ((_X_) < 0x7F)) 1628#endif 1629 1630static char * 1631mkreadable( 1632 char *buffer, 1633 size_t blen, 1634 const char *src, 1635 size_t srclen, 1636 int hex 1637 ) 1638{ 1639 static const char ellipsis[] = "..."; 1640 char *b = buffer; 1641 char *endb = NULL; 1642 1643 if (blen < 4) 1644 return NULL; /* don't bother with mini buffers */ 1645 1646 endb = buffer + blen - sizeof(ellipsis); 1647 1648 blen--; /* account for '\0' */ 1649 1650 while (blen && srclen--) 1651 { 1652 if (!hex && /* no binary only */ 1653 (*src != '\\') && /* no plain \ */ 1654 (*src != '"') && /* no " */ 1655 isprint((unsigned char)*src)) /* only printables */ 1656 { /* they are easy... */ 1657 *buffer++ = *src++; 1658 blen--; 1659 } 1660 else 1661 { 1662 if (blen < 4) 1663 { 1664 while (blen--) 1665 { 1666 *buffer++ = '.'; 1667 } 1668 *buffer = '\0'; 1669 return b; 1670 } 1671 else 1672 { 1673 if (*src == '\\') 1674 { 1675 memcpy(buffer, "\\\\", 2); 1676 buffer += 2; 1677 blen -= 2; 1678 src++; 1679 } 1680 else 1681 { 1682 snprintf(buffer, blen, "\\x%02x", *src++); 1683 blen -= 4; 1684 buffer += 4; 1685 } 1686 } 1687 } 1688 if (srclen && !blen && endb) /* overflow - set last chars to ... */ 1689 memcpy(endb, ellipsis, sizeof(ellipsis)); 1690 } 1691 1692 *buffer = '\0'; 1693 return b; 1694} 1695 1696 1697/*-------------------------------------------------- 1698 * mkascii - make a printable ascii string 1699 * assumes (unless defined better) 7-bit ASCII 1700 */ 1701static char * 1702mkascii( 1703 char *buffer, 1704 long blen, 1705 const char *src, 1706 u_long srclen 1707 ) 1708{ 1709 return mkreadable(buffer, blen, src, srclen, 0); 1710} 1711 1712/**=========================================================================== 1713 ** implementation of i/o handling methods 1714 ** (all STREAM, partial STREAM, user level) 1715 **/ 1716 1717/* 1718 * define possible io handling methods 1719 */ 1720#ifdef STREAM 1721static int ppsclock_init (struct parseunit *); 1722static int stream_init (struct parseunit *); 1723static void stream_end (struct parseunit *); 1724static int stream_enable (struct parseunit *); 1725static int stream_disable (struct parseunit *); 1726static int stream_setcs (struct parseunit *, parsectl_t *); 1727static int stream_getfmt (struct parseunit *, parsectl_t *); 1728static int stream_setfmt (struct parseunit *, parsectl_t *); 1729static int stream_timecode (struct parseunit *, parsectl_t *); 1730static void stream_receive (struct recvbuf *); 1731#endif 1732 1733static int local_init (struct parseunit *); 1734static void local_end (struct parseunit *); 1735static int local_nop (struct parseunit *); 1736static int local_setcs (struct parseunit *, parsectl_t *); 1737static int local_getfmt (struct parseunit *, parsectl_t *); 1738static int local_setfmt (struct parseunit *, parsectl_t *); 1739static int local_timecode (struct parseunit *, parsectl_t *); 1740static void local_receive (struct recvbuf *); 1741static int local_input (struct recvbuf *); 1742 1743static bind_t io_bindings[] = 1744{ 1745#ifdef STREAM 1746 { 1747 "parse STREAM", 1748 stream_init, 1749 stream_end, 1750 stream_setcs, 1751 stream_disable, 1752 stream_enable, 1753 stream_getfmt, 1754 stream_setfmt, 1755 stream_timecode, 1756 stream_receive, 1757 0, 1758 }, 1759 { 1760 "ppsclock STREAM", 1761 ppsclock_init, 1762 local_end, 1763 local_setcs, 1764 local_nop, 1765 local_nop, 1766 local_getfmt, 1767 local_setfmt, 1768 local_timecode, 1769 local_receive, 1770 local_input, 1771 }, 1772#endif 1773 { 1774 "normal", 1775 local_init, 1776 local_end, 1777 local_setcs, 1778 local_nop, 1779 local_nop, 1780 local_getfmt, 1781 local_setfmt, 1782 local_timecode, 1783 local_receive, 1784 local_input, 1785 }, 1786 { 1787 (char *)0, 1788 NULL, 1789 NULL, 1790 NULL, 1791 NULL, 1792 NULL, 1793 NULL, 1794 NULL, 1795 NULL, 1796 NULL, 1797 NULL, 1798 } 1799}; 1800 1801#ifdef STREAM 1802 1803/*-------------------------------------------------- 1804 * ppsclock STREAM init 1805 */ 1806static int 1807ppsclock_init( 1808 struct parseunit *parse 1809 ) 1810{ 1811 static char m1[] = "ppsclocd"; 1812 static char m2[] = "ppsclock"; 1813 1814 /* 1815 * now push the parse streams module 1816 * it will ensure exclusive access to the device 1817 */ 1818 if (ioctl(parse->ppsfd, I_PUSH, (caddr_t)m1) == -1 && 1819 ioctl(parse->ppsfd, I_PUSH, (caddr_t)m2) == -1) 1820 { 1821 if (errno != EINVAL) 1822 { 1823 msyslog(LOG_ERR, "PARSE receiver #%d: ppsclock_init: ioctl(fd, I_PUSH, \"ppsclock\"): %m", 1824 CLK_UNIT(parse->peer)); 1825 } 1826 return 0; 1827 } 1828 if (!local_init(parse)) 1829 { 1830 (void)ioctl(parse->ppsfd, I_POP, (caddr_t)0); 1831 return 0; 1832 } 1833 1834 parse->flags |= PARSE_PPSCLOCK; 1835 return 1; 1836} 1837 1838/*-------------------------------------------------- 1839 * parse STREAM init 1840 */ 1841static int 1842stream_init( 1843 struct parseunit *parse 1844 ) 1845{ 1846 static char m1[] = "parse"; 1847 /* 1848 * now push the parse streams module 1849 * to test whether it is there (neat interface 8-( ) 1850 */ 1851 if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) 1852 { 1853 if (errno != EINVAL) /* accept non-existence */ 1854 { 1855 msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); 1856 } 1857 return 0; 1858 } 1859 else 1860 { 1861 while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) 1862 /* empty loop */; 1863 1864 /* 1865 * now push it a second time after we have removed all 1866 * module garbage 1867 */ 1868 if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) 1869 { 1870 msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); 1871 return 0; 1872 } 1873 else 1874 { 1875 return 1; 1876 } 1877 } 1878} 1879 1880/*-------------------------------------------------- 1881 * parse STREAM end 1882 */ 1883static void 1884stream_end( 1885 struct parseunit *parse 1886 ) 1887{ 1888 while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) 1889 /* empty loop */; 1890} 1891 1892/*-------------------------------------------------- 1893 * STREAM setcs 1894 */ 1895static int 1896stream_setcs( 1897 struct parseunit *parse, 1898 parsectl_t *tcl 1899 ) 1900{ 1901 struct strioctl strioc; 1902 1903 strioc.ic_cmd = PARSEIOC_SETCS; 1904 strioc.ic_timout = 0; 1905 strioc.ic_dp = (char *)tcl; 1906 strioc.ic_len = sizeof (*tcl); 1907 1908 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1909 { 1910 msyslog(LOG_ERR, "PARSE receiver #%d: stream_setcs: ioctl(fd, I_STR, PARSEIOC_SETCS): %m", CLK_UNIT(parse->peer)); 1911 return 0; 1912 } 1913 return 1; 1914} 1915 1916/*-------------------------------------------------- 1917 * STREAM enable 1918 */ 1919static int 1920stream_enable( 1921 struct parseunit *parse 1922 ) 1923{ 1924 struct strioctl strioc; 1925 1926 strioc.ic_cmd = PARSEIOC_ENABLE; 1927 strioc.ic_timout = 0; 1928 strioc.ic_dp = (char *)0; 1929 strioc.ic_len = 0; 1930 1931 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1932 { 1933 msyslog(LOG_ERR, "PARSE receiver #%d: stream_enable: ioctl(fd, I_STR, PARSEIOC_ENABLE): %m", CLK_UNIT(parse->peer)); 1934 return 0; 1935 } 1936 parse->generic->io.clock_recv = stream_receive; /* ok - parse input in kernel */ 1937 return 1; 1938} 1939 1940/*-------------------------------------------------- 1941 * STREAM disable 1942 */ 1943static int 1944stream_disable( 1945 struct parseunit *parse 1946 ) 1947{ 1948 struct strioctl strioc; 1949 1950 strioc.ic_cmd = PARSEIOC_DISABLE; 1951 strioc.ic_timout = 0; 1952 strioc.ic_dp = (char *)0; 1953 strioc.ic_len = 0; 1954 1955 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1956 { 1957 msyslog(LOG_ERR, "PARSE receiver #%d: stream_disable: ioctl(fd, I_STR, PARSEIOC_DISABLE): %m", CLK_UNIT(parse->peer)); 1958 return 0; 1959 } 1960 parse->generic->io.clock_recv = local_receive; /* ok - parse input in daemon */ 1961 return 1; 1962} 1963 1964/*-------------------------------------------------- 1965 * STREAM getfmt 1966 */ 1967static int 1968stream_getfmt( 1969 struct parseunit *parse, 1970 parsectl_t *tcl 1971 ) 1972{ 1973 struct strioctl strioc; 1974 1975 strioc.ic_cmd = PARSEIOC_GETFMT; 1976 strioc.ic_timout = 0; 1977 strioc.ic_dp = (char *)tcl; 1978 strioc.ic_len = sizeof (*tcl); 1979 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1980 { 1981 msyslog(LOG_ERR, "PARSE receiver #%d: ioctl(fd, I_STR, PARSEIOC_GETFMT): %m", CLK_UNIT(parse->peer)); 1982 return 0; 1983 } 1984 return 1; 1985} 1986 1987/*-------------------------------------------------- 1988 * STREAM setfmt 1989 */ 1990static int 1991stream_setfmt( 1992 struct parseunit *parse, 1993 parsectl_t *tcl 1994 ) 1995{ 1996 struct strioctl strioc; 1997 1998 strioc.ic_cmd = PARSEIOC_SETFMT; 1999 strioc.ic_timout = 0; 2000 strioc.ic_dp = (char *)tcl; 2001 strioc.ic_len = sizeof (*tcl); 2002 2003 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 2004 { 2005 msyslog(LOG_ERR, "PARSE receiver #%d: stream_setfmt: ioctl(fd, I_STR, PARSEIOC_SETFMT): %m", CLK_UNIT(parse->peer)); 2006 return 0; 2007 } 2008 return 1; 2009} 2010 2011 2012/*-------------------------------------------------- 2013 * STREAM timecode 2014 */ 2015static int 2016stream_timecode( 2017 struct parseunit *parse, 2018 parsectl_t *tcl 2019 ) 2020{ 2021 struct strioctl strioc; 2022 2023 strioc.ic_cmd = PARSEIOC_TIMECODE; 2024 strioc.ic_timout = 0; 2025 strioc.ic_dp = (char *)tcl; 2026 strioc.ic_len = sizeof (*tcl); 2027 2028 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 2029 { 2030 ERR(ERR_INTERNAL) 2031 msyslog(LOG_ERR, "PARSE receiver #%d: stream_timecode: ioctl(fd, I_STR, PARSEIOC_TIMECODE): %m", CLK_UNIT(parse->peer)); 2032 return 0; 2033 } 2034 clear_err(parse, ERR_INTERNAL); 2035 return 1; 2036} 2037 2038/*-------------------------------------------------- 2039 * STREAM receive 2040 */ 2041static void 2042stream_receive( 2043 struct recvbuf *rbufp 2044 ) 2045{ 2046 struct parseunit * parse; 2047 parsetime_t parsetime; 2048 2049 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2050 if (!parse->peer) 2051 return; 2052 2053 if (rbufp->recv_length != sizeof(parsetime_t)) 2054 { 2055 ERR(ERR_BADIO) 2056 msyslog(LOG_ERR,"PARSE receiver #%d: stream_receive: bad size (got %d expected %d)", 2057 CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); 2058 parse_event(parse, CEVNT_BADREPLY); 2059 return; 2060 } 2061 clear_err(parse, ERR_BADIO); 2062 2063 memmove((caddr_t)&parsetime, 2064 (caddr_t)rbufp->recv_buffer, 2065 sizeof(parsetime_t)); 2066 2067#ifdef DEBUG 2068 if (debug > 3) 2069 { 2070 printf("PARSE receiver #%d: status %06x, state %08x, time %lx.%08lx, stime %lx.%08lx, ptime %lx.%08lx\n", 2071 CLK_UNIT(parse->peer), 2072 (unsigned int)parsetime.parse_status, 2073 (unsigned int)parsetime.parse_state, 2074 (unsigned long)parsetime.parse_time.tv.tv_sec, 2075 (unsigned long)parsetime.parse_time.tv.tv_usec, 2076 (unsigned long)parsetime.parse_stime.tv.tv_sec, 2077 (unsigned long)parsetime.parse_stime.tv.tv_usec, 2078 (unsigned long)parsetime.parse_ptime.tv.tv_sec, 2079 (unsigned long)parsetime.parse_ptime.tv.tv_usec); 2080 } 2081#endif 2082 2083 /* 2084 * switch time stamp world - be sure to normalize small usec field 2085 * errors. 2086 */ 2087 2088 parsetime.parse_stime.fp = tval_stamp_to_lfp(parsetime.parse_stime.tv); 2089 2090 if (PARSE_TIMECODE(parsetime.parse_state)) 2091 { 2092 parsetime.parse_time.fp = tval_stamp_to_lfp(parsetime.parse_time.tv); 2093 } 2094 2095 if (PARSE_PPS(parsetime.parse_state)) 2096 { 2097 parsetime.parse_ptime.fp = tval_stamp_to_lfp(parsetime.parse_ptime.tv); 2098 } 2099 2100 parse_process(parse, &parsetime); 2101} 2102#endif 2103 2104/*-------------------------------------------------- 2105 * local init 2106 */ 2107static int 2108local_init( 2109 struct parseunit *parse 2110 ) 2111{ 2112 return parse_ioinit(&parse->parseio); 2113} 2114 2115/*-------------------------------------------------- 2116 * local end 2117 */ 2118static void 2119local_end( 2120 struct parseunit *parse 2121 ) 2122{ 2123 parse_ioend(&parse->parseio); 2124} 2125 2126 2127/*-------------------------------------------------- 2128 * local nop 2129 */ 2130static int 2131local_nop( 2132 struct parseunit *parse 2133 ) 2134{ 2135 return 1; 2136} 2137 2138/*-------------------------------------------------- 2139 * local setcs 2140 */ 2141static int 2142local_setcs( 2143 struct parseunit *parse, 2144 parsectl_t *tcl 2145 ) 2146{ 2147 return parse_setcs(tcl, &parse->parseio); 2148} 2149 2150/*-------------------------------------------------- 2151 * local getfmt 2152 */ 2153static int 2154local_getfmt( 2155 struct parseunit *parse, 2156 parsectl_t *tcl 2157 ) 2158{ 2159 return parse_getfmt(tcl, &parse->parseio); 2160} 2161 2162/*-------------------------------------------------- 2163 * local setfmt 2164 */ 2165static int 2166local_setfmt( 2167 struct parseunit *parse, 2168 parsectl_t *tcl 2169 ) 2170{ 2171 return parse_setfmt(tcl, &parse->parseio); 2172} 2173 2174/*-------------------------------------------------- 2175 * local timecode 2176 */ 2177static int 2178local_timecode( 2179 struct parseunit *parse, 2180 parsectl_t *tcl 2181 ) 2182{ 2183 return parse_timecode(tcl, &parse->parseio); 2184} 2185 2186 2187/*-------------------------------------------------- 2188 * local input 2189 */ 2190static int 2191local_input( 2192 struct recvbuf *rbufp 2193 ) 2194{ 2195 struct parseunit * parse; 2196 2197 int count; 2198 unsigned char *s; 2199 timestamp_t ts; 2200 2201 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2202 if (!parse->peer) 2203 return 0; 2204 2205 /* 2206 * eat all characters, parsing then and feeding complete samples 2207 */ 2208 count = rbufp->recv_length; 2209 s = (unsigned char *)rbufp->recv_buffer; 2210 ts.fp = rbufp->recv_time; 2211 2212 while (count--) 2213 { 2214 if (parse_ioread(&parse->parseio, (unsigned int)(*s++), &ts)) 2215 { 2216 struct recvbuf *buf; 2217 2218 /* 2219 * got something good to eat 2220 */ 2221 if (!PARSE_PPS(parse->parseio.parse_dtime.parse_state)) 2222 { 2223#ifdef HAVE_PPSAPI 2224 if (parse->flags & PARSE_PPSCLOCK) 2225 { 2226 struct timespec pps_timeout; 2227 pps_info_t pps_info; 2228 2229 pps_timeout.tv_sec = 0; 2230 pps_timeout.tv_nsec = 0; 2231 2232 if (time_pps_fetch(parse->atom.handle, PPS_TSFMT_TSPEC, &pps_info, 2233 &pps_timeout) == 0) 2234 { 2235 if (pps_info.assert_sequence + pps_info.clear_sequence != parse->ppsserial) 2236 { 2237 double dtemp; 2238 2239 struct timespec pts; 2240 /* 2241 * add PPS time stamp if available via ppsclock module 2242 * and not supplied already. 2243 */ 2244 if (parse->flags & PARSE_CLEAR) 2245 pts = pps_info.clear_timestamp; 2246 else 2247 pts = pps_info.assert_timestamp; 2248 2249 parse->parseio.parse_dtime.parse_ptime.fp.l_ui = (uint32_t) (pts.tv_sec + JAN_1970); 2250 2251 dtemp = (double) pts.tv_nsec / 1e9; 2252 if (dtemp < 0.) { 2253 dtemp += 1; 2254 parse->parseio.parse_dtime.parse_ptime.fp.l_ui--; 2255 } 2256 if (dtemp > 1.) { 2257 dtemp -= 1; 2258 parse->parseio.parse_dtime.parse_ptime.fp.l_ui++; 2259 } 2260 parse->parseio.parse_dtime.parse_ptime.fp.l_uf = (uint32_t)(dtemp * FRAC); 2261 2262 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2263#ifdef DEBUG 2264 if (debug > 3) 2265 { 2266 printf( 2267 "parse: local_receive: fd %d PPSAPI seq %ld - PPS %s\n", 2268 rbufp->fd, 2269 (long)pps_info.assert_sequence + (long)pps_info.clear_sequence, 2270 lfptoa(&parse->parseio.parse_dtime.parse_ptime.fp, 6)); 2271 } 2272#endif 2273 } 2274#ifdef DEBUG 2275 else 2276 { 2277 if (debug > 3) 2278 { 2279 printf( 2280 "parse: local_receive: fd %d PPSAPI seq assert %ld, seq clear %ld - NO PPS event\n", 2281 rbufp->fd, 2282 (long)pps_info.assert_sequence, (long)pps_info.clear_sequence); 2283 } 2284 } 2285#endif 2286 parse->ppsserial = pps_info.assert_sequence + pps_info.clear_sequence; 2287 } 2288#ifdef DEBUG 2289 else 2290 { 2291 if (debug > 3) 2292 { 2293 printf( 2294 "parse: local_receive: fd %d PPSAPI time_pps_fetch errno = %d\n", 2295 rbufp->fd, 2296 errno); 2297 } 2298 } 2299#endif 2300 } 2301#else 2302#ifdef TIOCDCDTIMESTAMP 2303 struct timeval dcd_time; 2304 2305 if (ioctl(parse->ppsfd, TIOCDCDTIMESTAMP, &dcd_time) != -1) 2306 { 2307 l_fp tstmp; 2308 2309 TVTOTS(&dcd_time, &tstmp); 2310 tstmp.l_ui += JAN_1970; 2311 L_SUB(&ts.fp, &tstmp); 2312 if (ts.fp.l_ui == 0) 2313 { 2314#ifdef DEBUG 2315 if (debug) 2316 { 2317 printf( 2318 "parse: local_receive: fd %d DCDTIMESTAMP %s\n", 2319 parse->ppsfd, 2320 lfptoa(&tstmp, 6)); 2321 printf(" sigio %s\n", 2322 lfptoa(&ts.fp, 6)); 2323 } 2324#endif 2325 parse->parseio.parse_dtime.parse_ptime.fp = tstmp; 2326 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2327 } 2328 } 2329#else /* TIOCDCDTIMESTAMP */ 2330#if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) 2331 if (parse->flags & PARSE_PPSCLOCK) 2332 { 2333 l_fp tts; 2334 struct ppsclockev ev; 2335 2336#ifdef HAVE_CIOGETEV 2337 if (ioctl(parse->ppsfd, CIOGETEV, (caddr_t)&ev) == 0) 2338#endif 2339#ifdef HAVE_TIOCGPPSEV 2340 if (ioctl(parse->ppsfd, TIOCGPPSEV, (caddr_t)&ev) == 0) 2341#endif 2342 { 2343 if (ev.serial != parse->ppsserial) 2344 { 2345 /* 2346 * add PPS time stamp if available via ppsclock module 2347 * and not supplied already. 2348 */ 2349 if (!buftvtots((const char *)&ev.tv, &tts)) 2350 { 2351 ERR(ERR_BADDATA) 2352 msyslog(LOG_ERR,"parse: local_receive: timestamp conversion error (buftvtots) (ppsclockev.tv)"); 2353 } 2354 else 2355 { 2356 parse->parseio.parse_dtime.parse_ptime.fp = tts; 2357 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2358 } 2359 } 2360 parse->ppsserial = ev.serial; 2361 } 2362 } 2363#endif 2364#endif /* TIOCDCDTIMESTAMP */ 2365#endif /* !HAVE_PPSAPI */ 2366 } 2367 if (count) 2368 { /* simulate receive */ 2369 buf = get_free_recv_buffer(); 2370 if (buf != NULL) { 2371 memmove((caddr_t)buf->recv_buffer, 2372 (caddr_t)&parse->parseio.parse_dtime, 2373 sizeof(parsetime_t)); 2374 buf->recv_length = sizeof(parsetime_t); 2375 buf->recv_time = rbufp->recv_time; 2376#ifndef HAVE_IO_COMPLETION_PORT 2377 buf->srcadr = rbufp->srcadr; 2378#endif 2379 buf->dstadr = rbufp->dstadr; 2380 buf->receiver = rbufp->receiver; 2381 buf->fd = rbufp->fd; 2382 buf->X_from_where = rbufp->X_from_where; 2383 parse->generic->io.recvcount++; 2384 packets_received++; 2385 add_full_recv_buffer(buf); 2386#ifdef HAVE_IO_COMPLETION_PORT 2387 SetEvent(WaitableIoEventHandle); 2388#endif 2389 } 2390 parse_iodone(&parse->parseio); 2391 } 2392 else 2393 { 2394 memmove((caddr_t)rbufp->recv_buffer, 2395 (caddr_t)&parse->parseio.parse_dtime, 2396 sizeof(parsetime_t)); 2397 parse_iodone(&parse->parseio); 2398 rbufp->recv_length = sizeof(parsetime_t); 2399 return 1; /* got something & in place return */ 2400 } 2401 } 2402 } 2403 return 0; /* nothing to pass up */ 2404} 2405 2406/*-------------------------------------------------- 2407 * local receive 2408 */ 2409static void 2410local_receive( 2411 struct recvbuf *rbufp 2412 ) 2413{ 2414 struct parseunit * parse; 2415 parsetime_t parsetime; 2416 2417 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2418 if (!parse->peer) 2419 return; 2420 2421 if (rbufp->recv_length != sizeof(parsetime_t)) 2422 { 2423 ERR(ERR_BADIO) 2424 msyslog(LOG_ERR,"PARSE receiver #%d: local_receive: bad size (got %d expected %d)", 2425 CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); 2426 parse_event(parse, CEVNT_BADREPLY); 2427 return; 2428 } 2429 clear_err(parse, ERR_BADIO); 2430 2431 memmove((caddr_t)&parsetime, 2432 (caddr_t)rbufp->recv_buffer, 2433 sizeof(parsetime_t)); 2434 2435#ifdef DEBUG 2436 if (debug > 3) 2437 { 2438 printf("PARSE receiver #%d: status %06x, state %08x, time(fp) %lx.%08lx, stime(fp) %lx.%08lx, ptime(fp) %lx.%08lx\n", 2439 CLK_UNIT(parse->peer), 2440 (unsigned int)parsetime.parse_status, 2441 (unsigned int)parsetime.parse_state, 2442 (unsigned long)parsetime.parse_time.fp.l_ui, 2443 (unsigned long)parsetime.parse_time.fp.l_uf, 2444 (unsigned long)parsetime.parse_stime.fp.l_ui, 2445 (unsigned long)parsetime.parse_stime.fp.l_uf, 2446 (unsigned long)parsetime.parse_ptime.fp.l_ui, 2447 (unsigned long)parsetime.parse_ptime.fp.l_uf); 2448 } 2449#endif 2450 2451 parse_process(parse, &parsetime); 2452} 2453 2454/*-------------------------------------------------- 2455 * init_iobinding - find and initialize lower layers 2456 */ 2457static bind_t * 2458init_iobinding( 2459 struct parseunit *parse 2460 ) 2461{ 2462 bind_t *b = io_bindings; 2463 2464 while (b->bd_description != (char *)0) 2465 { 2466 if ((*b->bd_init)(parse)) 2467 { 2468 return b; 2469 } 2470 b++; 2471 } 2472 return (bind_t *)0; 2473} 2474 2475/**=========================================================================== 2476 ** support routines 2477 **/ 2478 2479static NTP_PRINTF(4, 5) char * 2480ap(char *buffer, size_t len, char *pos, const char *fmt, ...) 2481{ 2482 va_list va; 2483 int l; 2484 size_t rem = len - (pos - buffer); 2485 2486 if (rem == 0) 2487 return pos; 2488 2489 va_start(va, fmt); 2490 l = vsnprintf(pos, rem, fmt, va); 2491 va_end(va); 2492 2493 if (l != -1) { 2494 rem--; 2495 if (rem >= (size_t)l) 2496 pos += l; 2497 else 2498 pos += rem; 2499 } 2500 2501 return pos; 2502} 2503 2504/*-------------------------------------------------- 2505 * convert a flag field to a string 2506 */ 2507static char * 2508parsestate( 2509 u_long lstate, 2510 char *buffer, 2511 int size 2512 ) 2513{ 2514 static struct bits 2515 { 2516 u_long bit; 2517 const char *name; 2518 } flagstrings[] = 2519 { 2520 { PARSEB_ANNOUNCE, "DST SWITCH WARNING" }, 2521 { PARSEB_POWERUP, "NOT SYNCHRONIZED" }, 2522 { PARSEB_NOSYNC, "TIME CODE NOT CONFIRMED" }, 2523 { PARSEB_DST, "DST" }, 2524 { PARSEB_UTC, "UTC DISPLAY" }, 2525 { PARSEB_LEAPADD, "LEAP ADD WARNING" }, 2526 { PARSEB_LEAPDEL, "LEAP DELETE WARNING" }, 2527 { PARSEB_LEAPSECOND, "LEAP SECOND" }, 2528 { PARSEB_CALLBIT, "CALL BIT" }, 2529 { PARSEB_TIMECODE, "TIME CODE" }, 2530 { PARSEB_PPS, "PPS" }, 2531 { PARSEB_POSITION, "POSITION" }, 2532 { 0, NULL } 2533 }; 2534 2535 static struct sbits 2536 { 2537 u_long bit; 2538 const char *name; 2539 } sflagstrings[] = 2540 { 2541 { PARSEB_S_LEAP, "LEAP INDICATION" }, 2542 { PARSEB_S_PPS, "PPS SIGNAL" }, 2543 { PARSEB_S_CALLBIT, "CALLBIT" }, 2544 { PARSEB_S_POSITION, "POSITION" }, 2545 { 0, NULL } 2546 }; 2547 int i; 2548 char *s, *t; 2549 2550 *buffer = '\0'; 2551 s = t = buffer; 2552 2553 i = 0; 2554 while (flagstrings[i].bit) 2555 { 2556 if (flagstrings[i].bit & lstate) 2557 { 2558 if (s != t) 2559 t = ap(buffer, size, t, "; "); 2560 t = ap(buffer, size, t, "%s", flagstrings[i].name); 2561 } 2562 i++; 2563 } 2564 2565 if (lstate & (PARSEB_S_LEAP|PARSEB_S_CALLBIT|PARSEB_S_PPS|PARSEB_S_POSITION)) 2566 { 2567 if (s != t) 2568 t = ap(buffer, size, t, "; "); 2569 2570 t = ap(buffer, size, t, "("); 2571 2572 s = t; 2573 2574 i = 0; 2575 while (sflagstrings[i].bit) 2576 { 2577 if (sflagstrings[i].bit & lstate) 2578 { 2579 if (t != s) 2580 { 2581 t = ap(buffer, size, t, "; "); 2582 } 2583 2584 t = ap(buffer, size, t, "%s", 2585 sflagstrings[i].name); 2586 } 2587 i++; 2588 } 2589 t = ap(buffer, size, t, ")"); 2590 /* t is unused here, but if we don't track it and 2591 * need it later, that's a bug waiting to happen. 2592 */ 2593 } 2594 return buffer; 2595} 2596 2597/*-------------------------------------------------- 2598 * convert a status flag field to a string 2599 */ 2600static char * 2601parsestatus( 2602 u_long lstate, 2603 char *buffer, 2604 int size 2605 ) 2606{ 2607 static struct bits 2608 { 2609 u_long bit; 2610 const char *name; 2611 } flagstrings[] = 2612 { 2613 { CVT_OK, "CONVERSION SUCCESSFUL" }, 2614 { CVT_NONE, "NO CONVERSION" }, 2615 { CVT_FAIL, "CONVERSION FAILED" }, 2616 { CVT_BADFMT, "ILLEGAL FORMAT" }, 2617 { CVT_BADDATE, "DATE ILLEGAL" }, 2618 { CVT_BADTIME, "TIME ILLEGAL" }, 2619 { CVT_ADDITIONAL, "ADDITIONAL DATA" }, 2620 { 0, NULL } 2621 }; 2622 int i; 2623 char *t; 2624 2625 t = buffer; 2626 *buffer = '\0'; 2627 2628 i = 0; 2629 while (flagstrings[i].bit) 2630 { 2631 if (flagstrings[i].bit & lstate) 2632 { 2633 if (t != buffer) 2634 t = ap(buffer, size, t, "; "); 2635 t = ap(buffer, size, t, "%s", flagstrings[i].name); 2636 } 2637 i++; 2638 } 2639 2640 return buffer; 2641} 2642 2643/*-------------------------------------------------- 2644 * convert a clock status flag field to a string 2645 */ 2646static const char * 2647clockstatus( 2648 u_long lstate 2649 ) 2650{ 2651 static char buffer[20]; 2652 static struct status 2653 { 2654 u_long value; 2655 const char *name; 2656 } flagstrings[] = 2657 { 2658 { CEVNT_NOMINAL, "NOMINAL" }, 2659 { CEVNT_TIMEOUT, "NO RESPONSE" }, 2660 { CEVNT_BADREPLY,"BAD FORMAT" }, 2661 { CEVNT_FAULT, "FAULT" }, 2662 { CEVNT_PROP, "PROPAGATION DELAY" }, 2663 { CEVNT_BADDATE, "ILLEGAL DATE" }, 2664 { CEVNT_BADTIME, "ILLEGAL TIME" }, 2665 { (unsigned)~0L, NULL } 2666 }; 2667 int i; 2668 2669 i = 0; 2670 while (flagstrings[i].value != (u_int)~0) 2671 { 2672 if (flagstrings[i].value == lstate) 2673 { 2674 return flagstrings[i].name; 2675 } 2676 i++; 2677 } 2678 2679 snprintf(buffer, sizeof(buffer), "unknown #%ld", (u_long)lstate); 2680 2681 return buffer; 2682} 2683 2684 2685/*-------------------------------------------------- 2686 * l_mktime - make representation of a relative time 2687 */ 2688static char * 2689l_mktime( 2690 u_long delta 2691 ) 2692{ 2693 u_long tmp, m, s; 2694 static char buffer[40]; 2695 char *t; 2696 2697 buffer[0] = '\0'; 2698 t = buffer; 2699 2700 if ((tmp = delta / (60*60*24)) != 0) 2701 { 2702 t = ap(buffer, sizeof(buffer), t, "%ldd+", (u_long)tmp); 2703 delta -= tmp * 60*60*24; 2704 } 2705 2706 s = delta % 60; 2707 delta /= 60; 2708 m = delta % 60; 2709 delta /= 60; 2710 2711 t = ap(buffer, sizeof(buffer), t, "%02d:%02d:%02d", 2712 (int)delta, (int)m, (int)s); 2713 2714 return buffer; 2715} 2716 2717 2718/*-------------------------------------------------- 2719 * parse_statistics - list summary of clock states 2720 */ 2721static void 2722parse_statistics( 2723 struct parseunit *parse 2724 ) 2725{ 2726 int i; 2727 2728 NLOG(NLOG_CLOCKSTATIST) /* conditional if clause for conditional syslog */ 2729 { 2730 msyslog(LOG_INFO, "PARSE receiver #%d: running time: %s", 2731 CLK_UNIT(parse->peer), 2732 l_mktime(current_time - parse->generic->timestarted)); 2733 2734 msyslog(LOG_INFO, "PARSE receiver #%d: current status: %s", 2735 CLK_UNIT(parse->peer), 2736 clockstatus(parse->generic->currentstatus)); 2737 2738 for (i = 0; i <= CEVNT_MAX; i++) 2739 { 2740 u_long s_time; 2741 u_long percent, d = current_time - parse->generic->timestarted; 2742 2743 percent = s_time = PARSE_STATETIME(parse, i); 2744 2745 while (((u_long)(~0) / 10000) < percent) 2746 { 2747 percent /= 10; 2748 d /= 10; 2749 } 2750 2751 if (d) 2752 percent = (percent * 10000) / d; 2753 else 2754 percent = 10000; 2755 2756 if (s_time) 2757 msyslog(LOG_INFO, "PARSE receiver #%d: state %18s: %13s (%3ld.%02ld%%)", 2758 CLK_UNIT(parse->peer), 2759 clockstatus((unsigned int)i), 2760 l_mktime(s_time), 2761 percent / 100, percent % 100); 2762 } 2763 } 2764} 2765 2766/*-------------------------------------------------- 2767 * cparse_statistics - wrapper for statistics call 2768 */ 2769static void 2770cparse_statistics( 2771 struct parseunit *parse 2772 ) 2773{ 2774 if (parse->laststatistic + PARSESTATISTICS < current_time) 2775 parse_statistics(parse); 2776 parse->laststatistic = current_time; 2777} 2778 2779/**=========================================================================== 2780 ** ntp interface routines 2781 **/ 2782 2783/*-------------------------------------------------- 2784 * parse_shutdown - shut down a PARSE clock 2785 */ 2786static void 2787parse_shutdown( 2788 int unit, 2789 struct peer *peer 2790 ) 2791{ 2792 struct parseunit *parse = NULL; 2793 2794 if (peer && peer->procptr) 2795 parse = peer->procptr->unitptr; 2796 2797 if (!parse) 2798 { 2799 /* nothing to clean up */ 2800 return; 2801 } 2802 2803 if (!parse->peer) 2804 { 2805 msyslog(LOG_INFO, "PARSE receiver #%d: INTERNAL ERROR - unit already inactive - shutdown ignored", unit); 2806 return; 2807 } 2808 2809#ifdef HAVE_PPSAPI 2810 if (parse->flags & PARSE_PPSCLOCK) 2811 { 2812 (void)time_pps_destroy(parse->atom.handle); 2813 } 2814#endif 2815 if (parse->generic->io.fd != parse->ppsfd && parse->ppsfd != -1) 2816 (void)closeserial(parse->ppsfd); /* close separate PPS source */ 2817 2818 /* 2819 * print statistics a last time and 2820 * stop statistics machine 2821 */ 2822 parse_statistics(parse); 2823 2824 if (parse->parse_type->cl_end) 2825 { 2826 parse->parse_type->cl_end(parse); 2827 } 2828 2829 /* 2830 * cleanup before leaving this world 2831 */ 2832 if (parse->binding) 2833 PARSE_END(parse); 2834 2835 /* 2836 * Tell the I/O module to turn us off. We're history. 2837 */ 2838 io_closeclock(&parse->generic->io); 2839 2840 free_varlist(parse->kv); 2841 2842 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 2843 msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" removed", 2844 CLK_UNIT(parse->peer), parse->parse_type->cl_description); 2845 2846 parse->peer = (struct peer *)0; /* unused now */ 2847 peer->procptr->unitptr = (caddr_t)0; 2848 free(parse); 2849} 2850 2851#ifdef HAVE_PPSAPI 2852/*---------------------------------------- 2853 * set up HARDPPS via PPSAPI 2854 */ 2855static void 2856parse_hardpps( 2857 struct parseunit *parse, 2858 int mode 2859 ) 2860{ 2861 if (parse->hardppsstate == mode) 2862 return; 2863 2864 if (CLK_PPS(parse->peer) && (parse->flags & PARSE_PPSKERNEL)) { 2865 int i = 0; 2866 2867 if (mode == PARSE_HARDPPS_ENABLE) 2868 { 2869 if (parse->flags & PARSE_CLEAR) 2870 i = PPS_CAPTURECLEAR; 2871 else 2872 i = PPS_CAPTUREASSERT; 2873 } 2874 2875 if (time_pps_kcbind(parse->atom.handle, PPS_KC_HARDPPS, i, 2876 PPS_TSFMT_TSPEC) < 0) { 2877 msyslog(LOG_ERR, "PARSE receiver #%d: time_pps_kcbind failed: %m", 2878 CLK_UNIT(parse->peer)); 2879 } else { 2880 NLOG(NLOG_CLOCKINFO) 2881 msyslog(LOG_INFO, "PARSE receiver #%d: kernel PPS synchronisation %sabled", 2882 CLK_UNIT(parse->peer), (mode == PARSE_HARDPPS_ENABLE) ? "en" : "dis"); 2883 /* 2884 * tell the rest, that we have a kernel PPS source, iff we ever enable HARDPPS 2885 */ 2886 if (mode == PARSE_HARDPPS_ENABLE) 2887 hardpps_enable = 1; 2888 } 2889 } 2890 2891 parse->hardppsstate = mode; 2892} 2893 2894/*---------------------------------------- 2895 * set up PPS via PPSAPI 2896 */ 2897static int 2898parse_ppsapi( 2899 struct parseunit *parse 2900 ) 2901{ 2902 int cap, mode_ppsoffset; 2903 const char *cp; 2904 2905 parse->flags &= (u_char) (~PARSE_PPSCLOCK); 2906 2907 /* 2908 * collect PPSAPI offset capability - should move into generic handling 2909 */ 2910 if (time_pps_getcap(parse->atom.handle, &cap) < 0) { 2911 msyslog(LOG_ERR, "PARSE receiver #%d: parse_ppsapi: time_pps_getcap failed: %m", 2912 CLK_UNIT(parse->peer)); 2913 2914 return 0; 2915 } 2916 2917 /* 2918 * initialize generic PPSAPI interface 2919 * 2920 * we leave out CLK_FLAG3 as time_pps_kcbind() 2921 * is handled here for now. Ideally this should also 2922 * be part of the generic PPSAPI interface 2923 */ 2924 if (!refclock_params(parse->flags & (CLK_FLAG1|CLK_FLAG2|CLK_FLAG4), &parse->atom)) 2925 return 0; 2926 2927 /* nb. only turn things on, if someone else has turned something 2928 * on before we get here, leave it alone! 2929 */ 2930 2931 if (parse->flags & PARSE_CLEAR) { 2932 cp = "CLEAR"; 2933 mode_ppsoffset = PPS_OFFSETCLEAR; 2934 } else { 2935 cp = "ASSERT"; 2936 mode_ppsoffset = PPS_OFFSETASSERT; 2937 } 2938 2939 msyslog(LOG_INFO, "PARSE receiver #%d: initializing PPS to %s", 2940 CLK_UNIT(parse->peer), cp); 2941 2942 if (!(mode_ppsoffset & cap)) { 2943 msyslog(LOG_WARNING, "PARSE receiver #%d: Cannot set PPS_%sCLEAR, this will increase jitter (PPS API capabilities=0x%x)", 2944 CLK_UNIT(parse->peer), cp, cap); 2945 mode_ppsoffset = 0; 2946 } else { 2947 if (mode_ppsoffset == PPS_OFFSETCLEAR) 2948 { 2949 parse->atom.pps_params.clear_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); 2950 parse->atom.pps_params.clear_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); 2951 } 2952 2953 if (mode_ppsoffset == PPS_OFFSETASSERT) 2954 { 2955 parse->atom.pps_params.assert_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); 2956 parse->atom.pps_params.assert_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); 2957 } 2958 } 2959 2960 parse->atom.pps_params.mode |= mode_ppsoffset; 2961 2962 if (time_pps_setparams(parse->atom.handle, &parse->atom.pps_params) < 0) { 2963 msyslog(LOG_ERR, "PARSE receiver #%d: FAILED set PPS parameters: %m", 2964 CLK_UNIT(parse->peer)); 2965 return 0; 2966 } 2967 2968 parse->flags |= PARSE_PPSCLOCK; 2969 return 1; 2970} 2971#else 2972#define parse_hardpps(_PARSE_, _MODE_) /* empty */ 2973#endif 2974 2975/*-------------------------------------------------- 2976 * parse_start - open the PARSE devices and initialize data for processing 2977 */ 2978static int 2979parse_start( 2980 int sysunit, 2981 struct peer *peer 2982 ) 2983{ 2984 u_int unit; 2985 int fd232; 2986#ifdef HAVE_TERMIOS 2987 struct termios tio; /* NEEDED FOR A LONG TIME ! */ 2988#endif 2989#ifdef HAVE_SYSV_TTYS 2990 struct termio tio; /* NEEDED FOR A LONG TIME ! */ 2991#endif 2992 struct parseunit * parse; 2993 char parsedev[sizeof(PARSEDEVICE)+20]; 2994 char parseppsdev[sizeof(PARSEPPSDEVICE)+20]; 2995 parsectl_t tmp_ctl; 2996 u_int type; 2997 2998 /* 2999 * get out Copyright information once 3000 */ 3001 if (!notice) 3002 { 3003 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3004 msyslog(LOG_INFO, "NTP PARSE support: Copyright (c) 1989-2015, Frank Kardel"); 3005 notice = 1; 3006 } 3007 3008 type = CLK_TYPE(peer); 3009 unit = CLK_UNIT(peer); 3010 3011 if ((type == (u_int)~0) || (parse_clockinfo[type].cl_description == (char *)0)) 3012 { 3013 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: unsupported clock type %d (max %d)", 3014 unit, CLK_REALTYPE(peer), ncltypes-1); 3015 return 0; 3016 } 3017 3018 /* 3019 * Unit okay, attempt to open the device. 3020 */ 3021 (void) snprintf(parsedev, sizeof(parsedev), PARSEDEVICE, unit); 3022 (void) snprintf(parseppsdev, sizeof(parsedev), PARSEPPSDEVICE, unit); 3023 3024#ifndef O_NOCTTY 3025#define O_NOCTTY 0 3026#endif 3027#ifndef O_NONBLOCK 3028#define O_NONBLOCK 0 3029#endif 3030 3031 fd232 = tty_open(parsedev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); 3032 3033 if (fd232 == -1) 3034 { 3035 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: open of %s failed: %m", unit, parsedev); 3036 return 0; 3037 } 3038 3039 parse = emalloc_zero(sizeof(*parse)); 3040 3041 parse->generic = peer->procptr; /* link up */ 3042 parse->generic->unitptr = (caddr_t)parse; /* link down */ 3043 3044 /* 3045 * Set up the structures 3046 */ 3047 parse->generic->timestarted = current_time; 3048 parse->lastchange = current_time; 3049 3050 parse->flags = 0; 3051 parse->pollneeddata = 0; 3052 parse->laststatistic = current_time; 3053 parse->lastformat = (unsigned short)~0; /* assume no format known */ 3054 parse->timedata.parse_status = (unsigned short)~0; /* be sure to mark initial status change */ 3055 parse->lastmissed = 0; /* assume got everything */ 3056 parse->ppsserial = 0; 3057 parse->ppsfd = -1; 3058 parse->localdata = (void *)0; 3059 parse->localstate = 0; 3060 parse->kv = (struct ctl_var *)0; 3061 3062 clear_err(parse, ERR_ALL); 3063 3064 parse->parse_type = &parse_clockinfo[type]; 3065 3066 parse->maxunsync = parse->parse_type->cl_maxunsync; 3067 3068 parse->generic->fudgetime1 = parse->parse_type->cl_basedelay; 3069 3070 parse->generic->fudgetime2 = 0.0; 3071 parse->ppsphaseadjust = parse->generic->fudgetime2; 3072 3073 parse->generic->clockdesc = parse->parse_type->cl_description; 3074 3075 peer->rootdelay = parse->parse_type->cl_rootdelay; 3076 peer->sstclktype = parse->parse_type->cl_type; 3077 peer->precision = sys_precision; 3078 3079 peer->stratum = STRATUM_REFCLOCK; 3080 3081 if (peer->stratum <= 1) 3082 memmove((char *)&parse->generic->refid, parse->parse_type->cl_id, 4); 3083 else 3084 parse->generic->refid = htonl(PARSEHSREFID); 3085 3086 parse->generic->io.fd = fd232; 3087 3088 parse->peer = peer; /* marks it also as busy */ 3089 3090 /* 3091 * configure terminal line 3092 */ 3093 if (TTY_GETATTR(fd232, &tio) == -1) 3094 { 3095 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcgetattr(%d, &tio): %m", unit, fd232); 3096 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3097 return 0; 3098 } 3099 else 3100 { 3101#ifndef _PC_VDISABLE 3102 memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); 3103#else 3104 int disablec; 3105 errno = 0; /* pathconf can deliver -1 without changing errno ! */ 3106 3107 disablec = fpathconf(parse->generic->io.fd, _PC_VDISABLE); 3108 if (disablec == -1 && errno) 3109 { 3110 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: fpathconf(fd, _PC_VDISABLE): %m", CLK_UNIT(parse->peer)); 3111 memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); /* best guess */ 3112 } 3113 else 3114 if (disablec != -1) 3115 memset((char *)tio.c_cc, disablec, sizeof(tio.c_cc)); 3116#endif 3117 3118#if defined (VMIN) || defined(VTIME) 3119 if ((parse_clockinfo[type].cl_lflag & ICANON) == 0) 3120 { 3121#ifdef VMIN 3122 tio.c_cc[VMIN] = 1; 3123#endif 3124#ifdef VTIME 3125 tio.c_cc[VTIME] = 0; 3126#endif 3127 } 3128#endif 3129 3130 tio.c_cflag = (tcflag_t) parse_clockinfo[type].cl_cflag; 3131 tio.c_iflag = (tcflag_t) parse_clockinfo[type].cl_iflag; 3132 tio.c_oflag = (tcflag_t) parse_clockinfo[type].cl_oflag; 3133 tio.c_lflag = (tcflag_t) parse_clockinfo[type].cl_lflag; 3134 3135 3136#ifdef HAVE_TERMIOS 3137 if ((cfsetospeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1) || 3138 (cfsetispeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1)) 3139 { 3140 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcset{i,o}speed(&tio, speed): %m", unit); 3141 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3142 return 0; 3143 } 3144#else 3145 tio.c_cflag |= parse_clockinfo[type].cl_speed; 3146#endif 3147 3148 /* 3149 * set up pps device 3150 * if the PARSEPPSDEVICE can be opened that will be used 3151 * for PPS else PARSEDEVICE will be used 3152 */ 3153 parse->ppsfd = tty_open(parseppsdev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); 3154 3155 if (parse->ppsfd == -1) 3156 { 3157 parse->ppsfd = fd232; 3158 } 3159 3160/* 3161 * Linux PPS - the old way 3162 */ 3163#if defined(HAVE_TIO_SERIAL_STUFF) /* Linux hack: define PPS interface */ 3164 { 3165 struct serial_struct ss; 3166 if (ioctl(parse->ppsfd, TIOCGSERIAL, &ss) < 0 || 3167 ( 3168#ifdef ASYNC_LOW_LATENCY 3169 ss.flags |= ASYNC_LOW_LATENCY, 3170#endif 3171#ifndef HAVE_PPSAPI 3172#ifdef ASYNC_PPS_CD_NEG 3173 ss.flags |= ASYNC_PPS_CD_NEG, 3174#endif 3175#endif 3176 ioctl(parse->ppsfd, TIOCSSERIAL, &ss)) < 0) { 3177 msyslog(LOG_NOTICE, "refclock_parse: TIOCSSERIAL fd %d, %m", parse->ppsfd); 3178 msyslog(LOG_NOTICE, 3179 "refclock_parse: optional PPS processing not available"); 3180 } else { 3181 parse->flags |= PARSE_PPSCLOCK; 3182#ifdef ASYNC_PPS_CD_NEG 3183 NLOG(NLOG_CLOCKINFO) 3184 msyslog(LOG_INFO, 3185 "refclock_parse: PPS detection on"); 3186#endif 3187 } 3188 } 3189#endif 3190 3191/* 3192 * SUN the Solaris way 3193 */ 3194#ifdef HAVE_TIOCSPPS /* SUN PPS support */ 3195 if (CLK_PPS(parse->peer)) 3196 { 3197 int i = 1; 3198 3199 if (ioctl(parse->ppsfd, TIOCSPPS, (caddr_t)&i) == 0) 3200 { 3201 parse->flags |= PARSE_PPSCLOCK; 3202 } 3203 } 3204#endif 3205 3206/* 3207 * PPS via PPSAPI 3208 */ 3209#if defined(HAVE_PPSAPI) 3210 parse->hardppsstate = PARSE_HARDPPS_DISABLE; 3211 if (CLK_PPS(parse->peer)) 3212 { 3213 if (!refclock_ppsapi(parse->ppsfd, &parse->atom)) 3214 { 3215 msyslog(LOG_NOTICE, "PARSE receiver #%d: parse_start: could not set up PPS: %m", CLK_UNIT(parse->peer)); 3216 } 3217 else 3218 { 3219 parse_ppsapi(parse); 3220 } 3221 } 3222#endif 3223 3224 if (TTY_SETATTR(fd232, &tio) == -1) 3225 { 3226 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcsetattr(%d, &tio): %m", unit, fd232); 3227 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3228 return 0; 3229 } 3230 } 3231 3232 /* 3233 * pick correct input machine 3234 */ 3235 parse->generic->io.srcclock = peer; 3236 parse->generic->io.datalen = 0; 3237 3238 parse->binding = init_iobinding(parse); 3239 3240 if (parse->binding == (bind_t *)0) 3241 { 3242 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: io sub system initialisation failed.", CLK_UNIT(parse->peer)); 3243 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3244 return 0; /* well, ok - special initialisation broke */ 3245 } 3246 3247 parse->generic->io.clock_recv = parse->binding->bd_receive; /* pick correct receive routine */ 3248 parse->generic->io.io_input = parse->binding->bd_io_input; /* pick correct input routine */ 3249 3250 /* 3251 * as we always(?) get 8 bit chars we want to be 3252 * sure, that the upper bits are zero for less 3253 * than 8 bit I/O - so we pass that information on. 3254 * note that there can be only one bit count format 3255 * per file descriptor 3256 */ 3257 3258 switch (tio.c_cflag & CSIZE) 3259 { 3260 case CS5: 3261 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS5; 3262 break; 3263 3264 case CS6: 3265 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS6; 3266 break; 3267 3268 case CS7: 3269 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS7; 3270 break; 3271 3272 case CS8: 3273 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS8; 3274 break; 3275 } 3276 3277 if (!PARSE_SETCS(parse, &tmp_ctl)) 3278 { 3279 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setcs() FAILED.", unit); 3280 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3281 return 0; /* well, ok - special initialisation broke */ 3282 } 3283 3284 strlcpy(tmp_ctl.parseformat.parse_buffer, parse->parse_type->cl_format, sizeof(tmp_ctl.parseformat.parse_buffer)); 3285 tmp_ctl.parseformat.parse_count = (u_short) strlen(tmp_ctl.parseformat.parse_buffer); 3286 3287 if (!PARSE_SETFMT(parse, &tmp_ctl)) 3288 { 3289 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setfmt() FAILED.", unit); 3290 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3291 return 0; /* well, ok - special initialisation broke */ 3292 } 3293 3294 /* 3295 * get rid of all IO accumulated so far 3296 */ 3297#ifdef HAVE_TERMIOS 3298 (void) tcflush(parse->generic->io.fd, TCIOFLUSH); 3299#else 3300#if defined(TCFLSH) && defined(TCIOFLUSH) 3301 { 3302 int flshcmd = TCIOFLUSH; 3303 3304 (void) ioctl(parse->generic->io.fd, TCFLSH, (caddr_t)&flshcmd); 3305 } 3306#endif 3307#endif 3308 3309 /* 3310 * try to do any special initializations 3311 */ 3312 if (parse->parse_type->cl_init) 3313 { 3314 if (parse->parse_type->cl_init(parse)) 3315 { 3316 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3317 return 0; /* well, ok - special initialisation broke */ 3318 } 3319 } 3320 3321 /* 3322 * Insert in async io device list. 3323 */ 3324 if (!io_addclock(&parse->generic->io)) 3325 { 3326 msyslog(LOG_ERR, 3327 "PARSE receiver #%d: parse_start: addclock %s fails (ABORT - clock type requires async io)", CLK_UNIT(parse->peer), parsedev); 3328 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3329 return 0; 3330 } 3331 3332 /* 3333 * print out configuration 3334 */ 3335 NLOG(NLOG_CLOCKINFO) 3336 { 3337 /* conditional if clause for conditional syslog */ 3338 msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" (I/O device %s, PPS device %s) added", 3339 CLK_UNIT(parse->peer), 3340 parse->parse_type->cl_description, parsedev, 3341 (parse->ppsfd != parse->generic->io.fd) ? parseppsdev : parsedev); 3342 3343 msyslog(LOG_INFO, "PARSE receiver #%d: Stratum %d, trust time %s, precision %d", 3344 CLK_UNIT(parse->peer), 3345 parse->peer->stratum, 3346 l_mktime(parse->maxunsync), parse->peer->precision); 3347 3348 msyslog(LOG_INFO, "PARSE receiver #%d: rootdelay %.6f s, phase adjustment %.6f s, PPS phase adjustment %.6f s, %s IO handling", 3349 CLK_UNIT(parse->peer), 3350 parse->parse_type->cl_rootdelay, 3351 parse->generic->fudgetime1, 3352 parse->ppsphaseadjust, 3353 parse->binding->bd_description); 3354 3355 msyslog(LOG_INFO, "PARSE receiver #%d: Format recognition: %s", CLK_UNIT(parse->peer), 3356 parse->parse_type->cl_format); 3357 msyslog(LOG_INFO, "PARSE receiver #%d: %sPPS support%s", CLK_UNIT(parse->peer), 3358 CLK_PPS(parse->peer) ? "" : "NO ", 3359 CLK_PPS(parse->peer) ? 3360#ifdef PPS_METHOD 3361 " (implementation " PPS_METHOD ")" 3362#else 3363 "" 3364#endif 3365 : "" 3366 ); 3367 } 3368 3369 return 1; 3370} 3371 3372/*-------------------------------------------------- 3373 * parse_ctl - process changes on flags/time values 3374 */ 3375static void 3376parse_ctl( 3377 struct parseunit *parse, 3378 const struct refclockstat *in 3379 ) 3380{ 3381 if (in) 3382 { 3383 if (in->haveflags & (CLK_HAVEFLAG1|CLK_HAVEFLAG2|CLK_HAVEFLAG3|CLK_HAVEFLAG4)) 3384 { 3385 u_char mask = CLK_FLAG1|CLK_FLAG2|CLK_FLAG3|CLK_FLAG4; 3386 parse->flags = (parse->flags & (u_char)(~mask)) | (in->flags & mask); 3387#if defined(HAVE_PPSAPI) 3388 if (CLK_PPS(parse->peer)) 3389 { 3390 parse_ppsapi(parse); 3391 } 3392#endif 3393 } 3394 3395 if (in->haveflags & CLK_HAVETIME1) 3396 { 3397 parse->generic->fudgetime1 = in->fudgetime1; 3398 msyslog(LOG_INFO, "PARSE receiver #%d: new phase adjustment %.6f s", 3399 CLK_UNIT(parse->peer), 3400 parse->generic->fudgetime1); 3401 } 3402 3403 if (in->haveflags & CLK_HAVETIME2) 3404 { 3405 parse->generic->fudgetime2 = in->fudgetime2; 3406 if (parse->flags & PARSE_TRUSTTIME) 3407 { 3408 parse->maxunsync = (u_long)ABS(in->fudgetime2); 3409 msyslog(LOG_INFO, "PARSE receiver #%d: new trust time %s", 3410 CLK_UNIT(parse->peer), 3411 l_mktime(parse->maxunsync)); 3412 } 3413 else 3414 { 3415 parse->ppsphaseadjust = in->fudgetime2; 3416 msyslog(LOG_INFO, "PARSE receiver #%d: new PPS phase adjustment %.6f s", 3417 CLK_UNIT(parse->peer), 3418 parse->ppsphaseadjust); 3419#if defined(HAVE_PPSAPI) 3420 if (CLK_PPS(parse->peer)) 3421 { 3422 parse_ppsapi(parse); 3423 } 3424#endif 3425 } 3426 } 3427 } 3428} 3429 3430/*-------------------------------------------------- 3431 * parse_poll - called by the transmit procedure 3432 */ 3433static void 3434parse_poll( 3435 int unit, 3436 struct peer *peer 3437 ) 3438{ 3439 struct parseunit *parse = peer->procptr->unitptr; 3440 3441 if (peer != parse->peer) 3442 { 3443 msyslog(LOG_ERR, 3444 "PARSE receiver #%d: poll: INTERNAL: peer incorrect", 3445 unit); 3446 return; 3447 } 3448 3449 /* 3450 * Update clock stat counters 3451 */ 3452 parse->generic->polls++; 3453 3454 if (parse->pollneeddata && 3455 ((int)(current_time - parse->pollneeddata) > (1<<(max(min(parse->peer->hpoll, parse->peer->ppoll), parse->peer->minpoll))))) 3456 { 3457 /* 3458 * start worrying when exceeding a poll inteval 3459 * bad news - didn't get a response last time 3460 */ 3461 parse->lastmissed = current_time; 3462 parse_event(parse, CEVNT_TIMEOUT); 3463 3464 ERR(ERR_NODATA) 3465 msyslog(LOG_WARNING, "PARSE receiver #%d: no data from device within poll interval (check receiver / wiring)", CLK_UNIT(parse->peer)); 3466 } 3467 3468 /* 3469 * we just mark that we want the next sample for the clock filter 3470 */ 3471 parse->pollneeddata = current_time; 3472 3473 if (parse->parse_type->cl_poll) 3474 { 3475 parse->parse_type->cl_poll(parse); 3476 } 3477 3478 cparse_statistics(parse); 3479 3480 return; 3481} 3482 3483#define LEN_STATES 300 /* length of state string */ 3484 3485/*-------------------------------------------------- 3486 * parse_control - set fudge factors, return statistics 3487 */ 3488static void 3489parse_control( 3490 int unit, 3491 const struct refclockstat *in, 3492 struct refclockstat *out, 3493 struct peer *peer 3494 ) 3495{ 3496 struct parseunit *parse = peer->procptr->unitptr; 3497 parsectl_t tmpctl; 3498 3499 static char outstatus[400]; /* status output buffer */ 3500 3501 if (out) 3502 { 3503 out->lencode = 0; 3504 out->p_lastcode = 0; 3505 out->kv_list = (struct ctl_var *)0; 3506 } 3507 3508 if (!parse || !parse->peer) 3509 { 3510 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: unit invalid (UNIT INACTIVE)", 3511 unit); 3512 return; 3513 } 3514 3515 unit = CLK_UNIT(parse->peer); 3516 3517 /* 3518 * handle changes 3519 */ 3520 parse_ctl(parse, in); 3521 3522 /* 3523 * supply data 3524 */ 3525 if (out) 3526 { 3527 u_long sum = 0; 3528 char *tt, *start; 3529 int i; 3530 3531 outstatus[0] = '\0'; 3532 3533 out->type = REFCLK_PARSE; 3534 3535 /* 3536 * keep fudgetime2 in sync with TRUSTTIME/MAXUNSYNC flag1 3537 */ 3538 parse->generic->fudgetime2 = (parse->flags & PARSE_TRUSTTIME) ? (double)parse->maxunsync : parse->ppsphaseadjust; 3539 3540 /* 3541 * figure out skew between PPS and RS232 - just for informational 3542 * purposes 3543 */ 3544 if (PARSE_SYNC(parse->timedata.parse_state)) 3545 { 3546 if (PARSE_PPS(parse->timedata.parse_state) && PARSE_TIMECODE(parse->timedata.parse_state)) 3547 { 3548 l_fp off; 3549 3550 /* 3551 * we have a PPS and RS232 signal - calculate the skew 3552 * WARNING: assumes on TIMECODE == PULSE (timecode after pulse) 3553 */ 3554 off = parse->timedata.parse_stime.fp; 3555 L_SUB(&off, &parse->timedata.parse_ptime.fp); /* true offset */ 3556 tt = add_var(&out->kv_list, 80, RO); 3557 snprintf(tt, 80, "refclock_ppsskew=%s", lfptoms(&off, 6)); 3558 } 3559 } 3560 3561 if (PARSE_PPS(parse->timedata.parse_state)) 3562 { 3563 tt = add_var(&out->kv_list, 80, RO|DEF); 3564 snprintf(tt, 80, "refclock_ppstime=\"%s\"", gmprettydate(&parse->timedata.parse_ptime.fp)); 3565 } 3566 3567 start = tt = add_var(&out->kv_list, 128, RO|DEF); 3568 tt = ap(start, 128, tt, "refclock_time=\""); 3569 3570 if (parse->timedata.parse_time.fp.l_ui == 0) 3571 { 3572 tt = ap(start, 128, tt, "<UNDEFINED>\""); 3573 } 3574 else 3575 { 3576 tt = ap(start, 128, tt, "%s\"", 3577 gmprettydate(&parse->timedata.parse_time.fp)); 3578 } 3579 3580 if (!PARSE_GETTIMECODE(parse, &tmpctl)) 3581 { 3582 ERR(ERR_INTERNAL) 3583 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_timecode() FAILED", unit); 3584 } 3585 else 3586 { 3587 start = tt = add_var(&out->kv_list, 512, RO|DEF); 3588 tt = ap(start, 512, tt, "refclock_status=\""); 3589 3590 /* 3591 * copy PPS flags from last read transaction (informational only) 3592 */ 3593 tmpctl.parsegettc.parse_state |= parse->timedata.parse_state & 3594 (PARSEB_PPS|PARSEB_S_PPS); 3595 3596 (void)parsestate(tmpctl.parsegettc.parse_state, tt, BUFFER_SIZES(start, tt, 512)); 3597 3598 tt += strlen(tt); 3599 3600 tt = ap(start, 512, tt, "\""); 3601 3602 if (tmpctl.parsegettc.parse_count) 3603 mkascii(outstatus+strlen(outstatus), (int)(sizeof(outstatus)- strlen(outstatus) - 1), 3604 tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count)); 3605 3606 } 3607 3608 tmpctl.parseformat.parse_format = tmpctl.parsegettc.parse_format; 3609 3610 if (!PARSE_GETFMT(parse, &tmpctl)) 3611 { 3612 ERR(ERR_INTERNAL) 3613 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_getfmt() FAILED", unit); 3614 } 3615 else 3616 { 3617 int count = tmpctl.parseformat.parse_count - 1; 3618 3619 start = tt = add_var(&out->kv_list, 80, RO|DEF); 3620 tt = ap(start, 80, tt, "refclock_format=\""); 3621 3622 if (count > 0) { 3623 tt = ap(start, 80, tt, "%*.*s", 3624 count, 3625 count, 3626 tmpctl.parseformat.parse_buffer); 3627 } 3628 3629 tt = ap(start, 80, tt, "\""); 3630 } 3631 3632 /* 3633 * gather state statistics 3634 */ 3635 3636 start = tt = add_var(&out->kv_list, LEN_STATES, RO|DEF); 3637 tt = ap(start, LEN_STATES, tt, "refclock_states=\""); 3638 3639 for (i = 0; i <= CEVNT_MAX; i++) 3640 { 3641 u_long s_time; 3642 u_long d = current_time - parse->generic->timestarted; 3643 u_long percent; 3644 3645 percent = s_time = PARSE_STATETIME(parse, i); 3646 3647 while (((u_long)(~0) / 10000) < percent) 3648 { 3649 percent /= 10; 3650 d /= 10; 3651 } 3652 3653 if (d) 3654 percent = (percent * 10000) / d; 3655 else 3656 percent = 10000; 3657 3658 if (s_time) 3659 { 3660 char item[80]; 3661 int count; 3662 3663 snprintf(item, 80, "%s%s%s: %s (%d.%02d%%)", 3664 sum ? "; " : "", 3665 (parse->generic->currentstatus == i) ? "*" : "", 3666 clockstatus((unsigned int)i), 3667 l_mktime(s_time), 3668 (int)(percent / 100), (int)(percent % 100)); 3669 if ((count = (int) strlen(item)) < (LEN_STATES - 40 - (tt - start))) 3670 { 3671 tt = ap(start, LEN_STATES, tt, 3672 "%s", item); 3673 } 3674 sum += s_time; 3675 } 3676 } 3677 3678 tt = ap(start, LEN_STATES, tt, 3679 "; running time: %s\"", l_mktime(sum)); 3680 3681 tt = add_var(&out->kv_list, 32, RO); 3682 snprintf(tt, 32, "refclock_id=\"%s\"", parse->parse_type->cl_id); 3683 3684 tt = add_var(&out->kv_list, 80, RO); 3685 snprintf(tt, 80, "refclock_iomode=\"%s\"", parse->binding->bd_description); 3686 3687 tt = add_var(&out->kv_list, 128, RO); 3688 snprintf(tt, 128, "refclock_driver_version=\"%s\"", rcsid); 3689 3690 { 3691 struct ctl_var *k; 3692 3693 k = parse->kv; 3694 while (k && !(k->flags & EOV)) 3695 { 3696 set_var(&out->kv_list, k->text, strlen(k->text)+1, k->flags); 3697 k++; 3698 } 3699 } 3700 3701 out->lencode = (u_short) strlen(outstatus); 3702 out->p_lastcode = outstatus; 3703 } 3704} 3705 3706/**=========================================================================== 3707 ** processing routines 3708 **/ 3709 3710/*-------------------------------------------------- 3711 * event handling - note that nominal events will also be posted 3712 * keep track of state dwelling times 3713 */ 3714static void 3715parse_event( 3716 struct parseunit *parse, 3717 int event 3718 ) 3719{ 3720 if (parse->generic->currentstatus != (u_char) event) 3721 { 3722 parse->statetime[parse->generic->currentstatus] += current_time - parse->lastchange; 3723 parse->lastchange = current_time; 3724 3725 if (parse->parse_type->cl_event) 3726 parse->parse_type->cl_event(parse, event); 3727 3728 if (event == CEVNT_NOMINAL) 3729 { 3730 NLOG(NLOG_CLOCKSTATUS) 3731 msyslog(LOG_INFO, "PARSE receiver #%d: SYNCHRONIZED", 3732 CLK_UNIT(parse->peer)); 3733 } 3734 3735 refclock_report(parse->peer, event); 3736 } 3737} 3738 3739/*-------------------------------------------------- 3740 * process a PARSE time sample 3741 */ 3742static void 3743parse_process( 3744 struct parseunit *parse, 3745 parsetime_t *parsetime 3746 ) 3747{ 3748 l_fp off, rectime, reftime; 3749 double fudge; 3750 3751 /* silence warning: 'off.Ul_i.Xl_i' may be used uninitialized in this function */ 3752 ZERO(off); 3753 3754 /* 3755 * check for changes in conversion status 3756 * (only one for each new status !) 3757 */ 3758 if (((parsetime->parse_status & CVT_MASK) != CVT_OK) && 3759 ((parsetime->parse_status & CVT_MASK) != CVT_NONE) && 3760 (parse->timedata.parse_status != parsetime->parse_status)) 3761 { 3762 char buffer[400]; 3763 3764 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3765 msyslog(LOG_WARNING, "PARSE receiver #%d: conversion status \"%s\"", 3766 CLK_UNIT(parse->peer), parsestatus(parsetime->parse_status, buffer, sizeof(buffer))); 3767 3768 if ((parsetime->parse_status & CVT_MASK) == CVT_FAIL) 3769 { 3770 /* 3771 * tell more about the story - list time code 3772 * there is a slight change for a race condition and 3773 * the time code might be overwritten by the next packet 3774 */ 3775 parsectl_t tmpctl; 3776 3777 if (!PARSE_GETTIMECODE(parse, &tmpctl)) 3778 { 3779 ERR(ERR_INTERNAL) 3780 msyslog(LOG_ERR, "PARSE receiver #%d: parse_process: parse_timecode() FAILED", CLK_UNIT(parse->peer)); 3781 } 3782 else 3783 { 3784 ERR(ERR_BADDATA) 3785 msyslog(LOG_WARNING, "PARSE receiver #%d: FAILED TIMECODE: \"%s\" (check receiver configuration / wiring)", 3786 CLK_UNIT(parse->peer), mkascii(buffer, sizeof buffer, tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count - 1))); 3787 } 3788 /* copy status to show only changes in case of failures */ 3789 parse->timedata.parse_status = parsetime->parse_status; 3790 } 3791 } 3792 3793 /* 3794 * examine status and post appropriate events 3795 */ 3796 if ((parsetime->parse_status & CVT_MASK) != CVT_OK) 3797 { 3798 /* 3799 * got bad data - tell the rest of the system 3800 */ 3801 switch (parsetime->parse_status & CVT_MASK) 3802 { 3803 case CVT_NONE: 3804 if ((parsetime->parse_status & CVT_ADDITIONAL) && 3805 parse->parse_type->cl_message) 3806 parse->parse_type->cl_message(parse, parsetime); 3807 /* 3808 * save PPS information that comes piggyback 3809 */ 3810 if (PARSE_PPS(parsetime->parse_state)) 3811 { 3812 parse->timedata.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 3813 parse->timedata.parse_ptime = parsetime->parse_ptime; 3814 } 3815 break; /* well, still waiting - timeout is handled at higher levels */ 3816 3817 case CVT_FAIL: 3818 if (parsetime->parse_status & CVT_BADFMT) 3819 { 3820 parse_event(parse, CEVNT_BADREPLY); 3821 } 3822 else 3823 if (parsetime->parse_status & CVT_BADDATE) 3824 { 3825 parse_event(parse, CEVNT_BADDATE); 3826 } 3827 else 3828 if (parsetime->parse_status & CVT_BADTIME) 3829 { 3830 parse_event(parse, CEVNT_BADTIME); 3831 } 3832 else 3833 { 3834 parse_event(parse, CEVNT_BADREPLY); /* for the lack of something better */ 3835 } 3836 } 3837 return; /* skip the rest - useless */ 3838 } 3839 3840 /* 3841 * check for format changes 3842 * (in case somebody has swapped clocks 8-) 3843 */ 3844 if (parse->lastformat != parsetime->parse_format) 3845 { 3846 parsectl_t tmpctl; 3847 3848 tmpctl.parseformat.parse_format = parsetime->parse_format; 3849 3850 if (!PARSE_GETFMT(parse, &tmpctl)) 3851 { 3852 ERR(ERR_INTERNAL) 3853 msyslog(LOG_ERR, "PARSE receiver #%d: parse_getfmt() FAILED", CLK_UNIT(parse->peer)); 3854 } 3855 else 3856 { 3857 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3858 msyslog(LOG_INFO, "PARSE receiver #%d: packet format \"%s\"", 3859 CLK_UNIT(parse->peer), tmpctl.parseformat.parse_buffer); 3860 } 3861 parse->lastformat = parsetime->parse_format; 3862 } 3863 3864 /* 3865 * now, any changes ? 3866 */ 3867 if ((parse->timedata.parse_state ^ parsetime->parse_state) & 3868 ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS)) 3869 { 3870 char tmp1[200]; 3871 char tmp2[200]; 3872 /* 3873 * something happend - except for PPS events 3874 */ 3875 3876 (void) parsestate(parsetime->parse_state, tmp1, sizeof(tmp1)); 3877 (void) parsestate(parse->timedata.parse_state, tmp2, sizeof(tmp2)); 3878 3879 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3880 msyslog(LOG_INFO,"PARSE receiver #%d: STATE CHANGE: %s -> %s", 3881 CLK_UNIT(parse->peer), tmp2, tmp1); 3882 } 3883 3884 /* 3885 * carry on PPS information if still usable 3886 */ 3887 if (PARSE_PPS(parse->timedata.parse_state) && !PARSE_PPS(parsetime->parse_state)) 3888 { 3889 parsetime->parse_state |= PARSEB_PPS|PARSEB_S_PPS; 3890 parsetime->parse_ptime = parse->timedata.parse_ptime; 3891 } 3892 3893 /* 3894 * remember for future 3895 */ 3896 parse->timedata = *parsetime; 3897 3898 /* 3899 * check to see, whether the clock did a complete powerup or lost PZF signal 3900 * and post correct events for current condition 3901 */ 3902 if (PARSE_POWERUP(parsetime->parse_state)) 3903 { 3904 /* 3905 * this is bad, as we have completely lost synchronisation 3906 * well this is a problem with the receiver here 3907 * for PARSE Meinberg DCF77 receivers the lost synchronisation 3908 * is true as it is the powerup state and the time is taken 3909 * from a crude real time clock chip 3910 * for the PZF/GPS series this is only partly true, as 3911 * PARSE_POWERUP only means that the pseudo random 3912 * phase shift sequence cannot be found. this is only 3913 * bad, if we have never seen the clock in the SYNC 3914 * state, where the PHASE and EPOCH are correct. 3915 * for reporting events the above business does not 3916 * really matter, but we can use the time code 3917 * even in the POWERUP state after having seen 3918 * the clock in the synchronized state (PZF class 3919 * receivers) unless we have had a telegram disruption 3920 * after having seen the clock in the SYNC state. we 3921 * thus require having seen the clock in SYNC state 3922 * *after* having missed telegrams (noresponse) from 3923 * the clock. one problem remains: we might use erroneously 3924 * POWERUP data if the disruption is shorter than 1 polling 3925 * interval. fortunately powerdowns last usually longer than 64 3926 * seconds and the receiver is at least 2 minutes in the 3927 * POWERUP or NOSYNC state before switching to SYNC 3928 * for GPS receivers this can mean antenna problems and other causes. 3929 * the additional grace period can be enables by a clock 3930 * mode having the PARSE_F_POWERUPTRUST flag in cl_flag set. 3931 */ 3932 parse_event(parse, CEVNT_FAULT); 3933 NLOG(NLOG_CLOCKSTATUS) 3934 ERR(ERR_BADSTATUS) 3935 msyslog(LOG_ERR,"PARSE receiver #%d: NOT SYNCHRONIZED/RECEIVER PROBLEMS", 3936 CLK_UNIT(parse->peer)); 3937 } 3938 else 3939 { 3940 /* 3941 * we have two states left 3942 * 3943 * SYNC: 3944 * this state means that the EPOCH (timecode) and PHASE 3945 * information has be read correctly (at least two 3946 * successive PARSE timecodes were received correctly) 3947 * this is the best possible state - full trust 3948 * 3949 * NOSYNC: 3950 * The clock should be on phase with respect to the second 3951 * signal, but the timecode has not been received correctly within 3952 * at least the last two minutes. this is a sort of half baked state 3953 * for PARSE Meinberg DCF77 clocks this is bad news (clock running 3954 * without timecode confirmation) 3955 * PZF 535 has also no time confirmation, but the phase should be 3956 * very precise as the PZF signal can be decoded 3957 */ 3958 3959 if (PARSE_SYNC(parsetime->parse_state)) 3960 { 3961 /* 3962 * currently completely synchronized - best possible state 3963 */ 3964 parse->lastsync = current_time; 3965 clear_err(parse, ERR_BADSTATUS); 3966 } 3967 else 3968 { 3969 /* 3970 * we have had some problems receiving the time code 3971 */ 3972 parse_event(parse, CEVNT_PROP); 3973 NLOG(NLOG_CLOCKSTATUS) 3974 ERR(ERR_BADSTATUS) 3975 msyslog(LOG_ERR,"PARSE receiver #%d: TIMECODE NOT CONFIRMED", 3976 CLK_UNIT(parse->peer)); 3977 } 3978 } 3979 3980 fudge = parse->generic->fudgetime1; /* standard RS232 Fudgefactor */ 3981 3982 if (PARSE_TIMECODE(parsetime->parse_state)) 3983 { 3984 rectime = parsetime->parse_stime.fp; 3985 off = reftime = parsetime->parse_time.fp; 3986 3987 L_SUB(&off, &rectime); /* prepare for PPS adjustments logic */ 3988 3989#ifdef DEBUG 3990 if (debug > 3) 3991 printf("PARSE receiver #%d: Reftime %s, Recvtime %s - initial offset %s\n", 3992 CLK_UNIT(parse->peer), 3993 prettydate(&reftime), 3994 prettydate(&rectime), 3995 lfptoa(&off,6)); 3996#endif 3997 } 3998 3999 if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) 4000 { 4001 l_fp offset; 4002 double ppsphaseadjust = parse->ppsphaseadjust; 4003 4004#ifdef HAVE_PPSAPI 4005 /* 4006 * set fudge = 0.0 if already included in PPS time stamps 4007 */ 4008 if (parse->atom.pps_params.mode & (PPS_OFFSETCLEAR|PPS_OFFSETASSERT)) 4009 { 4010 ppsphaseadjust = 0.0; 4011 } 4012#endif 4013 4014 /* 4015 * we have a PPS signal - much better than the RS232 stuff (we hope) 4016 */ 4017 offset = parsetime->parse_ptime.fp; 4018 4019#ifdef DEBUG 4020 if (debug > 3) 4021 printf("PARSE receiver #%d: PPStime %s\n", 4022 CLK_UNIT(parse->peer), 4023 prettydate(&offset)); 4024#endif 4025 if (PARSE_TIMECODE(parsetime->parse_state)) 4026 { 4027 if (M_ISGEQ(off.l_i, off.l_uf, -1, 0x80000000) && 4028 M_ISGEQ(0, 0x7fffffff, off.l_i, off.l_uf)) 4029 { 4030 fudge = ppsphaseadjust; /* pick PPS fudge factor */ 4031 4032 /* 4033 * RS232 offsets within [-0.5..0.5[ - take PPS offsets 4034 */ 4035 4036 if (parse->parse_type->cl_flags & PARSE_F_PPSONSECOND) 4037 { 4038 reftime = off = offset; 4039 if (reftime.l_uf & 0x80000000) 4040 reftime.l_ui++; 4041 reftime.l_uf = 0; 4042 4043 4044 /* 4045 * implied on second offset 4046 */ 4047 off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ 4048 off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ 4049 } 4050 else 4051 { 4052 /* 4053 * time code describes pulse 4054 */ 4055 reftime = off = parsetime->parse_time.fp; 4056 4057 L_SUB(&off, &offset); /* true offset */ 4058 } 4059 } 4060 /* 4061 * take RS232 offset when PPS when out of bounds 4062 */ 4063 } 4064 else 4065 { 4066 fudge = ppsphaseadjust; /* pick PPS fudge factor */ 4067 /* 4068 * Well, no time code to guide us - assume on second pulse 4069 * and pray, that we are within [-0.5..0.5[ 4070 */ 4071 off = offset; 4072 reftime = offset; 4073 if (reftime.l_uf & 0x80000000) 4074 reftime.l_ui++; 4075 reftime.l_uf = 0; 4076 /* 4077 * implied on second offset 4078 */ 4079 off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ 4080 off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ 4081 } 4082 } 4083 else 4084 { 4085 if (!PARSE_TIMECODE(parsetime->parse_state)) 4086 { 4087 /* 4088 * Well, no PPS, no TIMECODE, no more work ... 4089 */ 4090 if ((parsetime->parse_status & CVT_ADDITIONAL) && 4091 parse->parse_type->cl_message) 4092 parse->parse_type->cl_message(parse, parsetime); 4093 return; 4094 } 4095 } 4096 4097#ifdef DEBUG 4098 if (debug > 3) 4099 printf("PARSE receiver #%d: Reftime %s, Recvtime %s - final offset %s\n", 4100 CLK_UNIT(parse->peer), 4101 prettydate(&reftime), 4102 prettydate(&rectime), 4103 lfptoa(&off,6)); 4104#endif 4105 4106 4107 rectime = reftime; 4108 L_SUB(&rectime, &off); /* just to keep the ntp interface happy */ 4109 4110#ifdef DEBUG 4111 if (debug > 3) 4112 printf("PARSE receiver #%d: calculated Reftime %s, Recvtime %s\n", 4113 CLK_UNIT(parse->peer), 4114 prettydate(&reftime), 4115 prettydate(&rectime)); 4116#endif 4117 4118 if ((parsetime->parse_status & CVT_ADDITIONAL) && 4119 parse->parse_type->cl_message) 4120 parse->parse_type->cl_message(parse, parsetime); 4121 4122 if (PARSE_SYNC(parsetime->parse_state)) 4123 { 4124 /* 4125 * log OK status 4126 */ 4127 parse_event(parse, CEVNT_NOMINAL); 4128 } 4129 4130 clear_err(parse, ERR_BADIO); 4131 clear_err(parse, ERR_BADDATA); 4132 clear_err(parse, ERR_NODATA); 4133 clear_err(parse, ERR_INTERNAL); 4134 4135 /* 4136 * and now stick it into the clock machine 4137 * samples are only valid iff lastsync is not too old and 4138 * we have seen the clock in sync at least once 4139 * after the last time we didn't see an expected data telegram 4140 * at startup being not in sync is also bad just like 4141 * POWERUP state unless PARSE_F_POWERUPTRUST is set 4142 * see the clock states section above for more reasoning 4143 */ 4144 if (((current_time - parse->lastsync) > parse->maxunsync) || 4145 (parse->lastsync < parse->lastmissed) || 4146 ((parse->lastsync == 0) && !PARSE_SYNC(parsetime->parse_state)) || 4147 (((parse->parse_type->cl_flags & PARSE_F_POWERUPTRUST) == 0) && 4148 PARSE_POWERUP(parsetime->parse_state))) 4149 { 4150 parse->generic->leap = LEAP_NOTINSYNC; 4151 parse->lastsync = 0; /* wait for full sync again */ 4152 } 4153 else 4154 { 4155 if (PARSE_LEAPADD(parsetime->parse_state)) 4156 { 4157 /* 4158 * we pick this state also for time code that pass leap warnings 4159 * without direction information (as earth is currently slowing 4160 * down). 4161 */ 4162 parse->generic->leap = (parse->flags & PARSE_LEAP_DELETE) ? LEAP_DELSECOND : LEAP_ADDSECOND; 4163 } 4164 else 4165 if (PARSE_LEAPDEL(parsetime->parse_state)) 4166 { 4167 parse->generic->leap = LEAP_DELSECOND; 4168 } 4169 else 4170 { 4171 parse->generic->leap = LEAP_NOWARNING; 4172 } 4173 } 4174 4175 if (parse->generic->leap != LEAP_NOTINSYNC) 4176 { 4177 /* 4178 * only good/trusted samples are interesting 4179 */ 4180#ifdef DEBUG 4181 if (debug > 2) 4182 { 4183 printf("PARSE receiver #%d: refclock_process_offset(reftime=%s, rectime=%s, Fudge=%f)\n", 4184 CLK_UNIT(parse->peer), 4185 prettydate(&reftime), 4186 prettydate(&rectime), 4187 fudge); 4188 } 4189#endif 4190 parse->generic->lastref = reftime; 4191 4192 refclock_process_offset(parse->generic, reftime, rectime, fudge); 4193 4194#ifdef HAVE_PPSAPI 4195 /* 4196 * pass PPS information on to PPS clock 4197 */ 4198 if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) 4199 { 4200 parse->peer->flags |= (FLAG_PPS | FLAG_TSTAMP_PPS); 4201 parse_hardpps(parse, PARSE_HARDPPS_ENABLE); 4202 } 4203#endif 4204 } else { 4205 parse_hardpps(parse, PARSE_HARDPPS_DISABLE); 4206 parse->peer->flags &= ~(FLAG_PPS | FLAG_TSTAMP_PPS); 4207 } 4208 4209 /* 4210 * ready, unless the machine wants a sample or 4211 * we are in fast startup mode (peer->dist > MAXDISTANCE) 4212 */ 4213 if (!parse->pollneeddata && parse->peer->disp <= MAXDISTANCE) 4214 return; 4215 4216 parse->pollneeddata = 0; 4217 4218 parse->timedata.parse_state &= ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS); 4219 4220 refclock_receive(parse->peer); 4221} 4222 4223/**=========================================================================== 4224 ** special code for special clocks 4225 **/ 4226 4227static void 4228mk_utcinfo( 4229 char *t, // pointer to the output string buffer 4230 int wnt, 4231 int wnlsf, 4232 int dn, 4233 int dtls, 4234 int dtlsf, 4235 int size // size of the output string buffer 4236 ) 4237{ 4238 /* 4239 * The week number transmitted by the GPS satellites for the leap date 4240 * is truncated to 8 bits only. If the nearest leap second date is off 4241 * the current date by more than +/- 128 weeks then conversion to a 4242 * calendar date is ambiguous. On the other hand, if a leap second is 4243 * currently being announced (i.e. dtlsf != dtls) then the week number 4244 * wnlsf is close enough, and we can unambiguously determine the date 4245 * for which the leap second is scheduled. 4246 */ 4247 if ( dtlsf != dtls ) 4248 { 4249 time_t t_ls; 4250 struct tm *tm; 4251 int n = 0; 4252 4253 if (wnlsf < GPSWRAP) 4254 wnlsf += GPSWEEKS; 4255 4256 if (wnt < GPSWRAP) 4257 wnt += GPSWEEKS; 4258 4259 t_ls = (time_t) wnlsf * SECSPERWEEK 4260 + (time_t) dn * SECSPERDAY 4261 + GPS_SEC_BIAS - 1; 4262 4263 tm = gmtime( &t_ls ); 4264 if (tm == NULL) // gmtime() failed 4265 { 4266 snprintf( t, size, "** (gmtime() failed in mk_utcinfo())" ); 4267 return; 4268 } 4269 4270 n += snprintf( t, size, "UTC offset transition from %is to %is due to leap second %s", 4271 dtls, dtlsf, ( dtls < dtlsf ) ? "insertion" : "deletion" ); 4272 n += snprintf( t + n, size - n, " at UTC midnight at the end of %s, %04i-%02i-%02i", 4273 daynames[tm->tm_wday], tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday ); 4274 } 4275 else 4276 snprintf( t, size, "UTC offset parameter: %is, no leap second announced.\n", dtls ); 4277 4278} 4279 4280#ifdef CLOCK_MEINBERG 4281/**=========================================================================== 4282 ** Meinberg GPS receiver support 4283 **/ 4284 4285/*------------------------------------------------------------ 4286 * gps16x_message - process messages from Meinberg GPS receiver 4287 */ 4288static void 4289gps16x_message( 4290 struct parseunit *parse, 4291 parsetime_t *parsetime 4292 ) 4293{ 4294 if (parse->timedata.parse_msglen && parsetime->parse_msg[0] == SOH) 4295 { 4296 GPS_MSG_HDR header; 4297 unsigned char *bufp = (unsigned char *)parsetime->parse_msg + 1; 4298 4299#ifdef DEBUG 4300 if (debug > 2) 4301 { 4302 char msgbuffer[600]; 4303 4304 mkreadable(msgbuffer, sizeof(msgbuffer), (char *)parsetime->parse_msg, parsetime->parse_msglen, 1); 4305 printf("PARSE receiver #%d: received message (%d bytes) >%s<\n", 4306 CLK_UNIT(parse->peer), 4307 parsetime->parse_msglen, 4308 msgbuffer); 4309 } 4310#endif 4311 get_mbg_header(&bufp, &header); 4312 if (header.hdr_csum == mbg_csum(parsetime->parse_msg + 1, 6) && 4313 (header.len == 0 || 4314 (header.len < sizeof(parsetime->parse_msg) && 4315 header.data_csum == mbg_csum(bufp, header.len)))) 4316 { 4317 /* 4318 * clean message 4319 */ 4320 switch (header.cmd) 4321 { 4322 case GPS_SW_REV: 4323 { 4324 char buffer[64]; 4325 SW_REV gps_sw_rev; 4326 4327 get_mbg_sw_rev(&bufp, &gps_sw_rev); 4328 snprintf(buffer, sizeof(buffer), "meinberg_gps_version=\"%x.%02x%s%s\"", 4329 (gps_sw_rev.code >> 8) & 0xFF, 4330 gps_sw_rev.code & 0xFF, 4331 gps_sw_rev.name[0] ? " " : "", 4332 gps_sw_rev.name); 4333 set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); 4334 } 4335 break; 4336 4337 case GPS_BVAR_STAT: 4338 { 4339 static struct state 4340 { 4341 BVAR_STAT flag; /* status flag */ 4342 const char *string; /* bit name */ 4343 } states[] = 4344 { 4345 { BVAR_CFGH_INVALID, "Configuration/Health" }, 4346 { BVAR_ALM_NOT_COMPLETE, "Almanachs" }, 4347 { BVAR_UTC_INVALID, "UTC Correction" }, 4348 { BVAR_IONO_INVALID, "Ionospheric Correction" }, 4349 { BVAR_RCVR_POS_INVALID, "Receiver Position" }, 4350 { 0, "" } 4351 }; 4352 BVAR_STAT status; 4353 struct state *s = states; 4354 char buffer[512]; 4355 char *p, *b; 4356 4357 status = (BVAR_STAT) get_lsb_short(&bufp); 4358 p = b = buffer; 4359 p = ap(buffer, sizeof(buffer), p, 4360 "meinberg_gps_status=\"[0x%04x] ", 4361 status); 4362 4363 if (status) 4364 { 4365 p = ap(buffer, sizeof(buffer), p, "incomplete buffered data: "); 4366 b = p; 4367 while (s->flag) 4368 { 4369 if (status & s->flag) 4370 { 4371 if (p != b) 4372 { 4373 p = ap(buffer, sizeof(buffer), p, ", "); 4374 } 4375 4376 p = ap(buffer, sizeof(buffer), p, "%s", (const char *)s->string); 4377 } 4378 s++; 4379 } 4380 p = ap(buffer, sizeof(buffer), p, "\""); 4381 } 4382 else 4383 { 4384 p = ap(buffer, sizeof(buffer), p, "<all buffered data complete>\""); 4385 } 4386 4387 set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); 4388 } 4389 break; 4390 4391 case GPS_POS_XYZ: 4392 { 4393 XYZ xyz; 4394 char buffer[256]; 4395 4396 get_mbg_xyz(&bufp, xyz); 4397 snprintf(buffer, sizeof(buffer), "gps_position(XYZ)=\"%s m, %s m, %s m\"", 4398 mfptoa(xyz[XP].l_ui, xyz[XP].l_uf, 1), 4399 mfptoa(xyz[YP].l_ui, xyz[YP].l_uf, 1), 4400 mfptoa(xyz[ZP].l_ui, xyz[ZP].l_uf, 1)); 4401 4402 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4403 } 4404 break; 4405 4406 case GPS_POS_LLA: 4407 { 4408 LLA lla; 4409 char buffer[256]; 4410 4411 get_mbg_lla(&bufp, lla); 4412 4413 snprintf(buffer, sizeof(buffer), "gps_position(LLA)=\"%s deg, %s deg, %s m\"", 4414 mfptoa(lla[LAT].l_ui, lla[LAT].l_uf, 4), 4415 mfptoa(lla[LON].l_ui, lla[LON].l_uf, 4), 4416 mfptoa(lla[ALT].l_ui, lla[ALT].l_uf, 1)); 4417 4418 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4419 } 4420 break; 4421 4422 case GPS_TZDL: 4423 break; 4424 4425 case GPS_PORT_PARM: 4426 break; 4427 4428 case GPS_SYNTH: 4429 break; 4430 4431 case GPS_ANT_INFO: 4432 { 4433 ANT_INFO antinfo; 4434 char buffer[512]; 4435 char *p, *q; 4436 4437 get_mbg_antinfo(&bufp, &antinfo); 4438 p = buffer; 4439 p = ap(buffer, sizeof(buffer), p, "meinberg_antenna_status=\""); 4440 switch (antinfo.status) 4441 { 4442 case ANT_INVALID: // No other fields valid since antenna has not yet been disconnected 4443 p = ap(buffer, sizeof(buffer), 4444 p, "<OK>"); 4445 break; 4446 4447 case ANT_DISCONN: // Antenna is disconnected, tm_reconn and delta_t not yet set 4448 q = ap(buffer, sizeof(buffer), 4449 p, "DISCONNECTED since "); 4450 NLOG(NLOG_CLOCKSTATUS) 4451 ERR(ERR_BADSTATUS) 4452 msyslog(LOG_ERR,"PARSE receiver #%d: ANTENNA FAILURE: %s", 4453 CLK_UNIT(parse->peer), p); 4454 4455 p = q; 4456 mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); 4457 *p = '\0'; 4458 break; 4459 4460 case ANT_RECONN: // Antenna had been disconnect, but receiver sync. after reconnect, so all fields valid 4461 p = ap(buffer, sizeof(buffer), 4462 p, "SYNC AFTER RECONNECT on "); 4463 mbg_tm_str(&p, &antinfo.tm_reconn, BUFFER_SIZE(buffer, p), 0); 4464 p = ap(buffer, sizeof(buffer), 4465 p, ", clock offset at reconnect %c%ld.%07ld s, disconnect time ", 4466 (antinfo.delta_t < 0) ? '-' : '+', 4467 (long) ABS(antinfo.delta_t) / 10000, 4468 (long) ABS(antinfo.delta_t) % 10000); 4469 mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); 4470 *p = '\0'; 4471 break; 4472 4473 default: 4474 p = ap(buffer, sizeof(buffer), 4475 p, "bad status 0x%04x", 4476 antinfo.status); 4477 break; 4478 } 4479 4480 p = ap(buffer, sizeof(buffer), p, "\""); 4481 4482 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4483 } 4484 break; 4485 4486 case GPS_UCAP: 4487 break; 4488 4489 case GPS_CFGH: 4490 { 4491 CFGH cfgh; 4492 char buffer[512]; 4493 char *p; 4494 4495 get_mbg_cfgh(&bufp, &cfgh); 4496 if (cfgh.valid) 4497 { 4498 const char *cp; 4499 uint16_t tmp_val; 4500 int i; 4501 4502 p = buffer; 4503 p = ap(buffer, sizeof(buffer), 4504 p, "gps_tot_51=\""); 4505 mbg_tgps_str(&p, &cfgh.tot_51, BUFFER_SIZE(buffer, p)); 4506 p = ap(buffer, sizeof(buffer), 4507 p, "\""); 4508 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4509 4510 p = buffer; 4511 p = ap(buffer, sizeof(buffer), 4512 p, "gps_tot_63=\""); 4513 mbg_tgps_str(&p, &cfgh.tot_63, BUFFER_SIZE(buffer, p)); 4514 p = ap(buffer, sizeof(buffer), 4515 p, "\""); 4516 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4517 4518 p = buffer; 4519 p = ap(buffer, sizeof(buffer), 4520 p, "gps_t0a=\""); 4521 mbg_tgps_str(&p, &cfgh.t0a, BUFFER_SIZE(buffer, p)); 4522 p = ap(buffer, sizeof(buffer), 4523 p, "\""); 4524 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4525 4526 for (i = 0; i < N_SVNO_GPS; i++) 4527 { 4528 p = buffer; 4529 p = ap(buffer, sizeof(buffer), p, "sv_info[%d]=\"PRN%d", i, i + N_SVNO_GPS); 4530 4531 tmp_val = cfgh.health[i]; /* a 6 bit SV health code */ 4532 p = ap(buffer, sizeof(buffer), p, "; health=0x%02x (", tmp_val); 4533 /* "All Ones" has a special meaning" */ 4534 if (tmp_val == 0x3F) /* satellite is unusable or doesn't even exist */ 4535 cp = "SV UNAVAILABLE"; 4536 else { 4537 /* The MSB contains a summary of the 3 MSBs of the 8 bit health code, 4538 * indicating if the data sent by the satellite is OK or not. */ 4539 p = ap(buffer, sizeof(buffer), p, "DATA %s, ", (tmp_val & 0x20) ? "BAD" : "OK" ); 4540 4541 /* The 5 LSBs contain the status of the different signals sent by the satellite. */ 4542 switch (tmp_val & 0x1F) 4543 { 4544 case 0x00: cp = "SIGNAL OK"; break; 4545 /* codes 0x01 through 0x1B indicate that one or more 4546 * specific signal components are weak or dead. 4547 * We don't decode this here in detail. */ 4548 case 0x1C: cp = "SV IS TEMP OUT"; break; 4549 case 0x1D: cp = "SV WILL BE TEMP OUT"; break; 4550 default: cp = "TRANSMISSION PROBLEMS"; break; 4551 } 4552 } 4553 p = ap(buffer, sizeof(buffer), p, "%s)", cp ); 4554 4555 tmp_val = cfgh.cfg[i]; /* a 4 bit SV configuration/type code */ 4556 p = ap(buffer, sizeof(buffer), p, "; cfg=0x%02x (", tmp_val); 4557 switch (tmp_val & 0x7) 4558 { 4559 case 0x00: cp = "(reserved)"; break; 4560 case 0x01: cp = "BLOCK II/IIA/IIR"; break; 4561 case 0x02: cp = "BLOCK IIR-M"; break; 4562 case 0x03: cp = "BLOCK IIF"; break; 4563 case 0x04: cp = "BLOCK III"; break; 4564 default: cp = "unknown SV type"; break; 4565 } 4566 p = ap(buffer, sizeof(buffer), p, "%s", cp ); 4567 if (tmp_val & 0x08) /* A-S is on, P-code is encrypted */ 4568 p = ap( buffer, sizeof(buffer), p, ", A-S on" ); 4569 4570 p = ap(buffer, sizeof(buffer), p, ")\""); 4571 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4572 } 4573 } 4574 } 4575 break; 4576 4577 case GPS_ALM: 4578 break; 4579 4580 case GPS_EPH: 4581 break; 4582 4583 case GPS_UTC: 4584 { 4585 UTC utc; 4586 char buffer[512]; 4587 char *p; 4588 4589 p = buffer; 4590 4591 get_mbg_utc(&bufp, &utc); 4592 4593 if (utc.valid) 4594 { 4595 p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\""); 4596 mk_utcinfo(p, utc.t0t.wn, utc.WNlsf, utc.DNt, utc.delta_tls, utc.delta_tlsf, BUFFER_SIZE(buffer, p)); 4597 p += strlen(p); 4598 p = ap(buffer, sizeof(buffer), p, "\""); 4599 } 4600 else 4601 { 4602 p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\"<NO UTC DATA>\""); 4603 } 4604 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4605 } 4606 break; 4607 4608 case GPS_IONO: 4609 break; 4610 4611 case GPS_ASCII_MSG: 4612 { 4613 ASCII_MSG gps_ascii_msg; 4614 char buffer[128]; 4615 4616 get_mbg_ascii_msg(&bufp, &gps_ascii_msg); 4617 4618 if (gps_ascii_msg.valid) 4619 { 4620 char buffer1[128]; 4621 mkreadable(buffer1, sizeof(buffer1), gps_ascii_msg.s, strlen(gps_ascii_msg.s), (int)0); 4622 4623 snprintf(buffer, sizeof(buffer), "gps_message=\"%s\"", buffer1); 4624 } 4625 else 4626 snprintf(buffer, sizeof(buffer), "gps_message=<NONE>"); 4627 4628 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4629 } 4630 4631 break; 4632 4633 default: 4634 break; 4635 } 4636 } 4637 else 4638 { 4639 msyslog(LOG_DEBUG, "PARSE receiver #%d: gps16x_message: message checksum error: hdr_csum = 0x%x (expected 0x%x), " 4640 "data_len = %d, data_csum = 0x%x (expected 0x%x)", 4641 CLK_UNIT(parse->peer), 4642 header.hdr_csum, mbg_csum(parsetime->parse_msg + 1, 6), 4643 header.len, 4644 header.data_csum, mbg_csum(bufp, (unsigned)((header.len < sizeof(parsetime->parse_msg)) ? header.len : 0))); 4645 } 4646 } 4647 4648 return; 4649} 4650 4651/*------------------------------------------------------------ 4652 * gps16x_poll - query the reciver peridically 4653 */ 4654static void 4655gps16x_poll( 4656 struct peer *peer 4657 ) 4658{ 4659 struct parseunit *parse = peer->procptr->unitptr; 4660 4661 static GPS_MSG_HDR sequence[] = 4662 { 4663 { GPS_SW_REV, 0, 0, 0 }, 4664 { GPS_BVAR_STAT, 0, 0, 0 }, 4665 { GPS_UTC, 0, 0, 0 }, 4666 { GPS_ASCII_MSG, 0, 0, 0 }, 4667 { GPS_ANT_INFO, 0, 0, 0 }, 4668 { GPS_CFGH, 0, 0, 0 }, 4669 { GPS_POS_XYZ, 0, 0, 0 }, 4670 { GPS_POS_LLA, 0, 0, 0 }, 4671 { (unsigned short)~0, 0, 0, 0 } 4672 }; 4673 4674 int rtc; 4675 unsigned char cmd_buffer[64]; 4676 unsigned char *outp = cmd_buffer; 4677 GPS_MSG_HDR *header; 4678 4679 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4680 { 4681 parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; 4682 } 4683 4684 if (sequence[parse->localstate].cmd == (unsigned short)~0) 4685 parse->localstate = 0; 4686 4687 header = sequence + parse->localstate++; 4688 4689 *outp++ = SOH; /* start command */ 4690 4691 put_mbg_header(&outp, header); 4692 outp = cmd_buffer + 1; 4693 4694 header->hdr_csum = (short)mbg_csum(outp, 6); 4695 put_mbg_header(&outp, header); 4696 4697#ifdef DEBUG 4698 if (debug > 2) 4699 { 4700 char buffer[128]; 4701 4702 mkreadable(buffer, sizeof(buffer), (char *)cmd_buffer, (unsigned)(outp - cmd_buffer), 1); 4703 printf("PARSE receiver #%d: transmitted message #%ld (%d bytes) >%s<\n", 4704 CLK_UNIT(parse->peer), 4705 parse->localstate - 1, 4706 (int)(outp - cmd_buffer), 4707 buffer); 4708 } 4709#endif 4710 4711 rtc = (int) write(parse->generic->io.fd, cmd_buffer, (unsigned long)(outp - cmd_buffer)); 4712 4713 if (rtc < 0) 4714 { 4715 ERR(ERR_BADIO) 4716 msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4717 } 4718 else 4719 if (rtc != outp - cmd_buffer) 4720 { 4721 ERR(ERR_BADIO) 4722 msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd incomplete (%d of %d bytes sent)", CLK_UNIT(parse->peer), rtc, (int)(outp - cmd_buffer)); 4723 } 4724 4725 clear_err(parse, ERR_BADIO); 4726 return; 4727} 4728 4729/*-------------------------------------------------- 4730 * init routine - setup timer 4731 */ 4732static int 4733gps16x_poll_init( 4734 struct parseunit *parse 4735 ) 4736{ 4737 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4738 { 4739 parse->peer->procptr->action = gps16x_poll; 4740 gps16x_poll(parse->peer); 4741 } 4742 4743 return 0; 4744} 4745 4746#else 4747static void 4748gps16x_message( 4749 struct parseunit *parse, 4750 parsetime_t *parsetime 4751 ) 4752{} 4753static int 4754gps16x_poll_init( 4755 struct parseunit *parse 4756 ) 4757{ 4758 return 1; 4759} 4760#endif /* CLOCK_MEINBERG */ 4761 4762/**=========================================================================== 4763 ** clock polling support 4764 **/ 4765 4766/*-------------------------------------------------- 4767 * direct poll routine 4768 */ 4769static void 4770poll_dpoll( 4771 struct parseunit *parse 4772 ) 4773{ 4774 long rtc; 4775 const char *ps = ((poll_info_t *)parse->parse_type->cl_data)->string; 4776 long ct = ((poll_info_t *)parse->parse_type->cl_data)->count; 4777 4778 rtc = write(parse->generic->io.fd, ps, ct); 4779 if (rtc < 0) 4780 { 4781 ERR(ERR_BADIO) 4782 msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4783 } 4784 else 4785 if (rtc != ct) 4786 { 4787 ERR(ERR_BADIO) 4788 msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd incomplete (%ld of %ld bytes sent)", CLK_UNIT(parse->peer), rtc, ct); 4789 } 4790 clear_err(parse, ERR_BADIO); 4791} 4792 4793/*-------------------------------------------------- 4794 * periodic poll routine 4795 */ 4796static void 4797poll_poll( 4798 struct peer *peer 4799 ) 4800{ 4801 struct parseunit *parse = peer->procptr->unitptr; 4802 4803 if (parse->parse_type->cl_poll) 4804 parse->parse_type->cl_poll(parse); 4805 4806 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4807 { 4808 parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; 4809 } 4810} 4811 4812/*-------------------------------------------------- 4813 * init routine - setup timer 4814 */ 4815static int 4816poll_init( 4817 struct parseunit *parse 4818 ) 4819{ 4820 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4821 { 4822 parse->peer->procptr->action = poll_poll; 4823 poll_poll(parse->peer); 4824 } 4825 4826 return 0; 4827} 4828 4829/**=========================================================================== 4830 ** Trimble support 4831 **/ 4832 4833/*------------------------------------------------------------- 4834 * trimble TAIP init routine - setup EOL and then do poll_init. 4835 */ 4836static int 4837trimbletaip_init( 4838 struct parseunit *parse 4839 ) 4840{ 4841#ifdef HAVE_TERMIOS 4842 struct termios tio; 4843#endif 4844#ifdef HAVE_SYSV_TTYS 4845 struct termio tio; 4846#endif 4847 /* 4848 * configure terminal line for trimble receiver 4849 */ 4850 if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) 4851 { 4852 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcgetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); 4853 return 0; 4854 } 4855 else 4856 { 4857 tio.c_cc[VEOL] = TRIMBLETAIP_EOL; 4858 4859 if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) 4860 { 4861 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcsetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); 4862 return 0; 4863 } 4864 } 4865 return poll_init(parse); 4866} 4867 4868/*-------------------------------------------------- 4869 * trimble TAIP event routine - reset receiver upon data format trouble 4870 */ 4871static const char *taipinit[] = { 4872 ">FPV00000000<", 4873 ">SRM;ID_FLAG=F;CS_FLAG=T;EC_FLAG=F;FR_FLAG=T;CR_FLAG=F<", 4874 ">FTM00020001<", 4875 (char *)0 4876}; 4877 4878static void 4879trimbletaip_event( 4880 struct parseunit *parse, 4881 int event 4882 ) 4883{ 4884 switch (event) 4885 { 4886 case CEVNT_BADREPLY: /* reset on garbled input */ 4887 case CEVNT_TIMEOUT: /* reset on no input */ 4888 { 4889 const char **iv; 4890 4891 iv = taipinit; 4892 while (*iv) 4893 { 4894 int rtc = (int) write(parse->generic->io.fd, *iv, strlen(*iv)); 4895 if (rtc < 0) 4896 { 4897 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4898 return; 4899 } 4900 else 4901 { 4902 if (rtc != (int)strlen(*iv)) 4903 { 4904 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd incomplete (%d of %d bytes sent)", 4905 CLK_UNIT(parse->peer), rtc, (int)strlen(*iv)); 4906 return; 4907 } 4908 } 4909 iv++; 4910 } 4911 4912 NLOG(NLOG_CLOCKINFO) 4913 ERR(ERR_BADIO) 4914 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: RECEIVER INITIALIZED", 4915 CLK_UNIT(parse->peer)); 4916 } 4917 break; 4918 4919 default: /* ignore */ 4920 break; 4921 } 4922} 4923 4924/* 4925 * This driver supports the Trimble SVee Six Plus GPS receiver module. 4926 * It should support other Trimble receivers which use the Trimble Standard 4927 * Interface Protocol (see below). 4928 * 4929 * The module has a serial I/O port for command/data and a 1 pulse-per-second 4930 * output, about 1 microsecond wide. The leading edge of the pulse is 4931 * coincident with the change of the GPS second. This is the same as 4932 * the change of the UTC second +/- ~1 microsecond. Some other clocks 4933 * specifically use a feature in the data message as a timing reference, but 4934 * the SVee Six Plus does not do this. In fact there is considerable jitter 4935 * on the timing of the messages, so this driver only supports the use 4936 * of the PPS pulse for accurate timing. Where it is determined that 4937 * the offset is way off, when first starting up ntpd for example, 4938 * the timing of the data stream is used until the offset becomes low enough 4939 * (|offset| < CLOCK_MAX), at which point the pps offset is used. 4940 * 4941 * It can use either option for receiving PPS information - the 'ppsclock' 4942 * stream pushed onto the serial data interface to timestamp the Carrier 4943 * Detect interrupts, where the 1PPS connects to the CD line. This only 4944 * works on SunOS 4.1.x currently. To select this, define PPSPPS in 4945 * Config.local. The other option is to use a pulse-stretcher/level-converter 4946 * to convert the PPS pulse into a RS232 start pulse & feed this into another 4947 * tty port. To use this option, define PPSCLK in Config.local. The pps input, 4948 * by whichever method, is handled in ntp_loopfilter.c 4949 * 4950 * The receiver uses a serial message protocol called Trimble Standard 4951 * Interface Protocol (it can support others but this driver only supports 4952 * TSIP). Messages in this protocol have the following form: 4953 * 4954 * <DLE><id> ... <data> ... <DLE><ETX> 4955 * 4956 * Any bytes within the <data> portion of value 10 hex (<DLE>) are doubled 4957 * on transmission and compressed back to one on reception. Otherwise 4958 * the values of data bytes can be anything. The serial interface is RS-422 4959 * asynchronous using 9600 baud, 8 data bits with odd party (**note** 9 bits 4960 * in total!), and 1 stop bit. The protocol supports byte, integer, single, 4961 * and double datatypes. Integers are two bytes, sent most significant first. 4962 * Singles are IEEE754 single precision floating point numbers (4 byte) sent 4963 * sign & exponent first. Doubles are IEEE754 double precision floating point 4964 * numbers (8 byte) sent sign & exponent first. 4965 * The receiver supports a large set of messages, only a small subset of 4966 * which are used here. From driver to receiver the following are used: 4967 * 4968 * ID Description 4969 * 4970 * 21 Request current time 4971 * 22 Mode Select 4972 * 2C Set/Request operating parameters 4973 * 2F Request UTC info 4974 * 35 Set/Request I/O options 4975 4976 * From receiver to driver the following are recognised: 4977 * 4978 * ID Description 4979 * 4980 * 41 GPS Time 4981 * 44 Satellite selection, PDOP, mode 4982 * 46 Receiver health 4983 * 4B Machine code/status 4984 * 4C Report operating parameters (debug only) 4985 * 4F UTC correction data (used to get leap second warnings) 4986 * 55 I/O options (debug only) 4987 * 4988 * All others are accepted but ignored. 4989 * 4990 */ 4991 4992#define PI 3.1415926535898 /* lots of sig figs */ 4993#define D2R PI/180.0 4994 4995/*------------------------------------------------------------------- 4996 * sendcmd, sendbyte, sendetx, sendflt, sendint implement the command 4997 * interface to the receiver. 4998 * 4999 * CAVEAT: the sendflt, sendint routines are byte order dependend and 5000 * float implementation dependend - these must be converted to portable 5001 * versions ! 5002 * 5003 * CURRENT LIMITATION: float implementation. This runs only on systems 5004 * with IEEE754 floats as native floats 5005 */ 5006 5007typedef struct trimble 5008{ 5009 u_long last_msg; /* last message received */ 5010 u_long last_reset; /* last time a reset was issued */ 5011 u_char qtracking; /* query tracking status */ 5012 u_long ctrack; /* current tracking set */ 5013 u_long ltrack; /* last tracking set */ 5014} trimble_t; 5015 5016union uval { 5017 u_char bd[8]; 5018 int iv; 5019 float fv; 5020 double dv; 5021}; 5022 5023struct txbuf 5024{ 5025 short idx; /* index to first unused byte */ 5026 u_char *txt; /* pointer to actual data buffer */ 5027}; 5028 5029void sendcmd (struct txbuf *buf, int c); 5030void sendbyte (struct txbuf *buf, int b); 5031void sendetx (struct txbuf *buf, struct parseunit *parse); 5032void sendint (struct txbuf *buf, int a); 5033void sendflt (struct txbuf *buf, double a); 5034 5035void 5036sendcmd( 5037 struct txbuf *buf, 5038 int c 5039 ) 5040{ 5041 buf->txt[0] = DLE; 5042 buf->txt[1] = (u_char)c; 5043 buf->idx = 2; 5044} 5045 5046void sendcmd (struct txbuf *buf, int c); 5047void sendbyte (struct txbuf *buf, int b); 5048void sendetx (struct txbuf *buf, struct parseunit *parse); 5049void sendint (struct txbuf *buf, int a); 5050void sendflt (struct txbuf *buf, double a); 5051 5052void 5053sendbyte( 5054 struct txbuf *buf, 5055 int b 5056 ) 5057{ 5058 if (b == DLE) 5059 buf->txt[buf->idx++] = DLE; 5060 buf->txt[buf->idx++] = (u_char)b; 5061} 5062 5063void 5064sendetx( 5065 struct txbuf *buf, 5066 struct parseunit *parse 5067 ) 5068{ 5069 buf->txt[buf->idx++] = DLE; 5070 buf->txt[buf->idx++] = ETX; 5071 5072 if (write(parse->generic->io.fd, buf->txt, (unsigned long)buf->idx) != buf->idx) 5073 { 5074 ERR(ERR_BADIO) 5075 msyslog(LOG_ERR, "PARSE receiver #%d: sendetx: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 5076 } 5077 else 5078 { 5079#ifdef DEBUG 5080 if (debug > 2) 5081 { 5082 char buffer[256]; 5083 5084 mkreadable(buffer, sizeof(buffer), (char *)buf->txt, (unsigned)buf->idx, 1); 5085 printf("PARSE receiver #%d: transmitted message (%d bytes) >%s<\n", 5086 CLK_UNIT(parse->peer), 5087 buf->idx, buffer); 5088 } 5089#endif 5090 clear_err(parse, ERR_BADIO); 5091 } 5092} 5093 5094void 5095sendint( 5096 struct txbuf *buf, 5097 int a 5098 ) 5099{ 5100 /* send 16bit int, msbyte first */ 5101 sendbyte(buf, (u_char)((a>>8) & 0xff)); 5102 sendbyte(buf, (u_char)(a & 0xff)); 5103} 5104 5105void 5106sendflt( 5107 struct txbuf *buf, 5108 double a 5109 ) 5110{ 5111 int i; 5112 union uval uval; 5113 5114 uval.fv = (float) a; 5115#ifdef WORDS_BIGENDIAN 5116 for (i=0; i<=3; i++) 5117#else 5118 for (i=3; i>=0; i--) 5119#endif 5120 sendbyte(buf, uval.bd[i]); 5121} 5122 5123#define TRIM_POS_OPT 0x13 /* output position with high precision */ 5124#define TRIM_TIME_OPT 0x03 /* use UTC time stamps, on second */ 5125 5126/*-------------------------------------------------- 5127 * trimble TSIP setup routine 5128 */ 5129static int 5130trimbletsip_setup( 5131 struct parseunit *parse, 5132 const char *reason 5133 ) 5134{ 5135 u_char buffer[256]; 5136 struct txbuf buf; 5137 trimble_t *t = parse->localdata; 5138 5139 if (t && t->last_reset && 5140 ((t->last_reset + TRIMBLE_RESET_HOLDOFF) > current_time)) { 5141 return 1; /* not yet */ 5142 } 5143 5144 if (t) 5145 t->last_reset = current_time; 5146 5147 buf.txt = buffer; 5148 5149 sendcmd(&buf, CMD_CVERSION); /* request software versions */ 5150 sendetx(&buf, parse); 5151 5152 sendcmd(&buf, CMD_COPERPARAM); /* set operating parameters */ 5153 sendbyte(&buf, 4); /* static */ 5154 sendflt(&buf, 5.0*D2R); /* elevation angle mask = 10 deg XXX */ 5155 sendflt(&buf, 4.0); /* s/n ratio mask = 6 XXX */ 5156 sendflt(&buf, 12.0); /* PDOP mask = 12 */ 5157 sendflt(&buf, 8.0); /* PDOP switch level = 8 */ 5158 sendetx(&buf, parse); 5159 5160 sendcmd(&buf, CMD_CMODESEL); /* fix mode select */ 5161 sendbyte(&buf, 1); /* time transfer mode */ 5162 sendetx(&buf, parse); 5163 5164 sendcmd(&buf, CMD_CMESSAGE); /* request system message */ 5165 sendetx(&buf, parse); 5166 5167 sendcmd(&buf, CMD_CSUPER); /* superpacket fix */ 5168 sendbyte(&buf, 0x2); /* binary mode */ 5169 sendetx(&buf, parse); 5170 5171 sendcmd(&buf, CMD_CIOOPTIONS); /* set I/O options */ 5172 sendbyte(&buf, TRIM_POS_OPT); /* position output */ 5173 sendbyte(&buf, 0x00); /* no velocity output */ 5174 sendbyte(&buf, TRIM_TIME_OPT); /* UTC, compute on seconds */ 5175 sendbyte(&buf, 0x00); /* no raw measurements */ 5176 sendetx(&buf, parse); 5177 5178 sendcmd(&buf, CMD_CUTCPARAM); /* request UTC correction data */ 5179 sendetx(&buf, parse); 5180 5181 NLOG(NLOG_CLOCKINFO) 5182 ERR(ERR_BADIO) 5183 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_setup: RECEIVER RE-INITIALIZED (%s)", CLK_UNIT(parse->peer), reason); 5184 5185 return 0; 5186} 5187 5188/*-------------------------------------------------- 5189 * TRIMBLE TSIP check routine 5190 */ 5191static void 5192trimble_check( 5193 struct peer *peer 5194 ) 5195{ 5196 struct parseunit *parse = peer->procptr->unitptr; 5197 trimble_t *t = parse->localdata; 5198 u_char buffer[256]; 5199 struct txbuf buf; 5200 buf.txt = buffer; 5201 5202 if (t) 5203 { 5204 if (current_time > t->last_msg + TRIMBLETSIP_IDLE_TIME) 5205 (void)trimbletsip_setup(parse, "message timeout"); 5206 } 5207 5208 poll_poll(parse->peer); /* emit query string and re-arm timer */ 5209 5210 if (t && t->qtracking) 5211 { 5212 u_long oldsats = t->ltrack & ~t->ctrack; 5213 5214 t->qtracking = 0; 5215 t->ltrack = t->ctrack; 5216 5217 if (oldsats) 5218 { 5219 int i; 5220 5221 for (i = 0; oldsats; i++) { 5222 if (oldsats & (1 << i)) 5223 { 5224 sendcmd(&buf, CMD_CSTATTRACK); 5225 sendbyte(&buf, i+1); /* old sat */ 5226 sendetx(&buf, parse); 5227 } 5228 oldsats &= ~(1 << i); 5229 } 5230 } 5231 5232 sendcmd(&buf, CMD_CSTATTRACK); 5233 sendbyte(&buf, 0x00); /* current tracking set */ 5234 sendetx(&buf, parse); 5235 } 5236} 5237 5238/*-------------------------------------------------- 5239 * TRIMBLE TSIP end routine 5240 */ 5241static void 5242trimbletsip_end( 5243 struct parseunit *parse 5244 ) 5245{ trimble_t *t = parse->localdata; 5246 5247 if (t) 5248 { 5249 free(t); 5250 parse->localdata = NULL; 5251 } 5252 parse->peer->procptr->nextaction = 0; 5253 parse->peer->procptr->action = NULL; 5254} 5255 5256/*-------------------------------------------------- 5257 * TRIMBLE TSIP init routine 5258 */ 5259static int 5260trimbletsip_init( 5261 struct parseunit *parse 5262 ) 5263{ 5264#if defined(VEOL) || defined(VEOL2) 5265#ifdef HAVE_TERMIOS 5266 struct termios tio; /* NEEDED FOR A LONG TIME ! */ 5267#endif 5268#ifdef HAVE_SYSV_TTYS 5269 struct termio tio; /* NEEDED FOR A LONG TIME ! */ 5270#endif 5271 /* 5272 * allocate local data area 5273 */ 5274 if (!parse->localdata) 5275 { 5276 trimble_t *t; 5277 5278 t = (trimble_t *)(parse->localdata = emalloc(sizeof(trimble_t))); 5279 5280 if (t) 5281 { 5282 memset((char *)t, 0, sizeof(trimble_t)); 5283 t->last_msg = current_time; 5284 } 5285 } 5286 5287 parse->peer->procptr->action = trimble_check; 5288 parse->peer->procptr->nextaction = current_time; 5289 5290 /* 5291 * configure terminal line for ICANON mode with VEOL characters 5292 */ 5293 if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) 5294 { 5295 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcgetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); 5296 return 0; 5297 } 5298 else 5299 { 5300 if ((parse_clockinfo[CLK_TYPE(parse->peer)].cl_lflag & ICANON)) 5301 { 5302#ifdef VEOL 5303 tio.c_cc[VEOL] = ETX; 5304#endif 5305#ifdef VEOL2 5306 tio.c_cc[VEOL2] = DLE; 5307#endif 5308 } 5309 5310 if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) 5311 { 5312 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcsetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); 5313 return 0; 5314 } 5315 } 5316#endif 5317 return trimbletsip_setup(parse, "initial startup"); 5318} 5319 5320/*------------------------------------------------------------ 5321 * trimbletsip_event - handle Trimble events 5322 * simple evente handler - attempt to re-initialize receiver 5323 */ 5324static void 5325trimbletsip_event( 5326 struct parseunit *parse, 5327 int event 5328 ) 5329{ 5330 switch (event) 5331 { 5332 case CEVNT_BADREPLY: /* reset on garbled input */ 5333 case CEVNT_TIMEOUT: /* reset on no input */ 5334 (void)trimbletsip_setup(parse, "event BAD_REPLY/TIMEOUT"); 5335 break; 5336 5337 default: /* ignore */ 5338 break; 5339 } 5340} 5341 5342/* 5343 * getflt, getint convert fields in the incoming data into the 5344 * appropriate type of item 5345 * 5346 * CAVEAT: these routines are currently definitely byte order dependent 5347 * and assume Representation(float) == IEEE754 5348 * These functions MUST be converted to portable versions (especially 5349 * converting the float representation into ntp_fp formats in order 5350 * to avoid floating point operations at all! 5351 */ 5352 5353static float 5354getflt( 5355 u_char *bp 5356 ) 5357{ 5358 union uval uval; 5359 5360#ifdef WORDS_BIGENDIAN 5361 uval.bd[0] = *bp++; 5362 uval.bd[1] = *bp++; 5363 uval.bd[2] = *bp++; 5364 uval.bd[3] = *bp; 5365#else /* ! WORDS_BIGENDIAN */ 5366 uval.bd[3] = *bp++; 5367 uval.bd[2] = *bp++; 5368 uval.bd[1] = *bp++; 5369 uval.bd[0] = *bp; 5370#endif /* ! WORDS_BIGENDIAN */ 5371 return uval.fv; 5372} 5373 5374static double 5375getdbl( 5376 u_char *bp 5377 ) 5378{ 5379 union uval uval; 5380 5381#ifdef WORDS_BIGENDIAN 5382 uval.bd[0] = *bp++; 5383 uval.bd[1] = *bp++; 5384 uval.bd[2] = *bp++; 5385 uval.bd[3] = *bp++; 5386 uval.bd[4] = *bp++; 5387 uval.bd[5] = *bp++; 5388 uval.bd[6] = *bp++; 5389 uval.bd[7] = *bp; 5390#else /* ! WORDS_BIGENDIAN */ 5391 uval.bd[7] = *bp++; 5392 uval.bd[6] = *bp++; 5393 uval.bd[5] = *bp++; 5394 uval.bd[4] = *bp++; 5395 uval.bd[3] = *bp++; 5396 uval.bd[2] = *bp++; 5397 uval.bd[1] = *bp++; 5398 uval.bd[0] = *bp; 5399#endif /* ! WORDS_BIGENDIAN */ 5400 return uval.dv; 5401} 5402 5403static int 5404getshort( 5405 unsigned char *p 5406 ) 5407{ 5408 return (int) get_msb_short(&p); 5409} 5410 5411/*-------------------------------------------------- 5412 * trimbletsip_message - process trimble messages 5413 */ 5414#define RTOD (180.0 / 3.1415926535898) 5415#define mb(_X_) (buffer[2+(_X_)]) /* shortcut for buffer access */ 5416 5417static void 5418trimbletsip_message( 5419 struct parseunit *parse, 5420 parsetime_t *parsetime 5421 ) 5422{ 5423 unsigned char *buffer = parsetime->parse_msg; 5424 unsigned int size = parsetime->parse_msglen; 5425 5426 if ((size < 4) || 5427 (buffer[0] != DLE) || 5428 (buffer[size-1] != ETX) || 5429 (buffer[size-2] != DLE)) 5430 { 5431#ifdef DEBUG 5432 if (debug > 2) { 5433 size_t i; 5434 5435 printf("TRIMBLE BAD packet, size %d:\n ", size); 5436 for (i = 0; i < size; i++) { 5437 printf ("%2.2x, ", buffer[i]&0xff); 5438 if (i%16 == 15) printf("\n\t"); 5439 } 5440 printf("\n"); 5441 } 5442#endif 5443 return; 5444 } 5445 else 5446 { 5447 u_short var_flag; 5448 trimble_t *tr = parse->localdata; 5449 unsigned int cmd = buffer[1]; 5450 char pbuffer[200]; 5451 char *t = pbuffer; 5452 cmd_info_t *s; 5453 5454#ifdef DEBUG 5455 if (debug > 3) { 5456 size_t i; 5457 5458 printf("TRIMBLE packet 0x%02x, size %d:\n ", cmd, size); 5459 for (i = 0; i < size; i++) { 5460 printf ("%2.2x, ", buffer[i]&0xff); 5461 if (i%16 == 15) printf("\n\t"); 5462 } 5463 printf("\n"); 5464 } 5465#endif 5466 5467 if (tr) 5468 tr->last_msg = current_time; 5469 5470 s = trimble_convert(cmd, trimble_rcmds); 5471 5472 if (s) 5473 { 5474 t = ap(pbuffer, sizeof(pbuffer), t, "%s=\"", s->varname); 5475 } 5476 else 5477 { 5478 DPRINTF(1, ("TRIMBLE UNKNOWN COMMAND 0x%02x\n", cmd)); 5479 return; 5480 } 5481 5482 var_flag = (u_short) s->varmode; 5483 5484 switch(cmd) 5485 { 5486 case CMD_RCURTIME: 5487 t = ap(pbuffer, sizeof(pbuffer), t, "%f, %d, %f", 5488 getflt((unsigned char *)&mb(0)), getshort((unsigned char *)&mb(4)), 5489 getflt((unsigned char *)&mb(6))); 5490 break; 5491 5492 case CMD_RBEST4: 5493 t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); 5494 switch (mb(0) & 0xF) 5495 { 5496 default: 5497 t = ap(pbuffer, sizeof(pbuffer), t, 5498 "0x%x", mb(0) & 0x7); 5499 break; 5500 5501 case 1: 5502 t = ap(pbuffer, sizeof(pbuffer), t, "0D"); 5503 break; 5504 5505 case 3: 5506 t = ap(pbuffer, sizeof(pbuffer), t, "2D"); 5507 break; 5508 5509 case 4: 5510 t = ap(pbuffer, sizeof(pbuffer), t, "3D"); 5511 break; 5512 } 5513 if (mb(0) & 0x10) 5514 t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); 5515 else 5516 t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); 5517 5518 t = ap(pbuffer, sizeof(pbuffer), t, "satellites %02d %02d %02d %02d, PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f", 5519 mb(1), mb(2), mb(3), mb(4), 5520 getflt((unsigned char *)&mb(5)), 5521 getflt((unsigned char *)&mb(9)), 5522 getflt((unsigned char *)&mb(13)), 5523 getflt((unsigned char *)&mb(17))); 5524 5525 break; 5526 5527 case CMD_RVERSION: 5528 t = ap(pbuffer, sizeof(pbuffer), t, "%d.%d (%d/%d/%d)", 5529 mb(0)&0xff, mb(1)&0xff, 1900+(mb(4)&0xff), mb(2)&0xff, mb(3)&0xff); 5530 break; 5531 5532 case CMD_RRECVHEALTH: 5533 { 5534 static const char *msgs[] = 5535 { 5536 "Battery backup failed", 5537 "Signal processor error", 5538 "Alignment error, channel or chip 1", 5539 "Alignment error, channel or chip 2", 5540 "Antenna feed line fault", 5541 "Excessive ref freq. error", 5542 "<BIT 6>", 5543 "<BIT 7>" 5544 }; 5545 5546 int i, bits; 5547 5548 switch (mb(0) & 0xFF) 5549 { 5550 default: 5551 t = ap(pbuffer, sizeof(pbuffer), t, "illegal value 0x%02x", mb(0) & 0xFF); 5552 break; 5553 case 0x00: 5554 t = ap(pbuffer, sizeof(pbuffer), t, "doing position fixes"); 5555 break; 5556 case 0x01: 5557 t = ap(pbuffer, sizeof(pbuffer), t, "no GPS time yet"); 5558 break; 5559 case 0x03: 5560 t = ap(pbuffer, sizeof(pbuffer), t, "PDOP too high"); 5561 break; 5562 case 0x08: 5563 t = ap(pbuffer, sizeof(pbuffer), t, "no usable satellites"); 5564 break; 5565 case 0x09: 5566 t = ap(pbuffer, sizeof(pbuffer), t, "only ONE usable satellite"); 5567 break; 5568 case 0x0A: 5569 t = ap(pbuffer, sizeof(pbuffer), t, "only TWO usable satellites"); 5570 break; 5571 case 0x0B: 5572 t = ap(pbuffer, sizeof(pbuffer), t, "only THREE usable satellites"); 5573 break; 5574 case 0x0C: 5575 t = ap(pbuffer, sizeof(pbuffer), t, "the chosen satellite is unusable"); 5576 break; 5577 } 5578 5579 bits = mb(1) & 0xFF; 5580 5581 for (i = 0; i < 8; i++) 5582 if (bits & (0x1<<i)) 5583 { 5584 t = ap(pbuffer, sizeof(pbuffer), t, ", %s", msgs[i]); 5585 } 5586 } 5587 break; 5588 5589 case CMD_RMESSAGE: 5590 mkreadable(t, (int)BUFFER_SIZE(pbuffer, t), (char *)&mb(0), (unsigned)(size - 2 - (&mb(0) - buffer)), 0); 5591 break; 5592 5593 case CMD_RMACHSTAT: 5594 { 5595 static const char *msgs[] = 5596 { 5597 "Synthesizer Fault", 5598 "Battery Powered Time Clock Fault", 5599 "A-to-D Converter Fault", 5600 "The almanac stored in the receiver is not complete and current", 5601 "<BIT 4>", 5602 "<BIT 5", 5603 "<BIT 6>", 5604 "<BIT 7>" 5605 }; 5606 5607 int i, bits; 5608 5609 t = ap(pbuffer, sizeof(pbuffer), t, "machine id 0x%02x", mb(0) & 0xFF); 5610 bits = mb(1) & 0xFF; 5611 5612 for (i = 0; i < 8; i++) 5613 if (bits & (0x1<<i)) 5614 { 5615 t = ap(pbuffer, sizeof(pbuffer), t, ", %s", msgs[i]); 5616 } 5617 5618 t = ap(pbuffer, sizeof(pbuffer), t, ", Superpackets %ssupported", (mb(2) & 0xFF) ? "" :"un" ); 5619 } 5620 break; 5621 5622 case CMD_ROPERPARAM: 5623 t = ap(pbuffer, sizeof(pbuffer), t, "%2x %.1f %.1f %.1f %.1f", 5624 mb(0), getflt((unsigned char *)&mb(1)), getflt((unsigned char *)&mb(5)), 5625 getflt((unsigned char *)&mb(9)), getflt((unsigned char *)&mb(13))); 5626 break; 5627 5628 case CMD_RUTCPARAM: 5629 { 5630 float t0t = getflt((unsigned char *)&mb(14)); 5631 short wnt = (short) getshort((unsigned char *)&mb(18)); 5632 short dtls = (short) getshort((unsigned char *)&mb(12)); 5633 short wnlsf = (short) getshort((unsigned char *)&mb(20)); 5634 short dn = (short) getshort((unsigned char *)&mb(22)); 5635 short dtlsf = (short) getshort((unsigned char *)&mb(24)); 5636 5637 if ((int)t0t != 0) 5638 { 5639 mk_utcinfo(t, wnt, wnlsf, dn, dtls, dtlsf, BUFFER_SIZE(pbuffer, t)); 5640 } 5641 else 5642 { 5643 t = ap(pbuffer, sizeof(pbuffer), t, "<NO UTC DATA>"); 5644 } 5645 } 5646 break; 5647 5648 case CMD_RSAT1BIAS: 5649 t = ap(pbuffer, sizeof(pbuffer), t, "%.1fm %.2fm/s at %.1fs", 5650 getflt(&mb(0)), getflt(&mb(4)), getflt(&mb(8))); 5651 break; 5652 5653 case CMD_RIOOPTIONS: 5654 { 5655 t = ap(pbuffer, sizeof(pbuffer), t, "%02x %02x %02x %02x", 5656 mb(0), mb(1), mb(2), mb(3)); 5657 if (mb(0) != TRIM_POS_OPT || 5658 mb(2) != TRIM_TIME_OPT) 5659 { 5660 (void)trimbletsip_setup(parse, "bad io options"); 5661 } 5662 } 5663 break; 5664 5665 case CMD_RSPOSXYZ: 5666 { 5667 double x = getflt((unsigned char *)&mb(0)); 5668 double y = getflt((unsigned char *)&mb(4)); 5669 double z = getflt((unsigned char *)&mb(8)); 5670 double f = getflt((unsigned char *)&mb(12)); 5671 5672 if (f > 0.0) 5673 t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm, time_of_fix= %f sec", 5674 x, y, z, 5675 f); 5676 else 5677 return; 5678 } 5679 break; 5680 5681 case CMD_RSLLAPOS: 5682 { 5683 double lat = getflt((unsigned char *)&mb(0)); 5684 double lng = getflt((unsigned char *)&mb(4)); 5685 double f = getflt((unsigned char *)&mb(12)); 5686 5687 if (f > 0.0) 5688 t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, long %f %c, alt %.2fm", 5689 ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), 5690 ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), 5691 getflt((unsigned char *)&mb(8))); 5692 else 5693 return; 5694 } 5695 break; 5696 5697 case CMD_RDOUBLEXYZ: 5698 { 5699 double x = getdbl((unsigned char *)&mb(0)); 5700 double y = getdbl((unsigned char *)&mb(8)); 5701 double z = getdbl((unsigned char *)&mb(16)); 5702 t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm", 5703 x, y, z); 5704 } 5705 break; 5706 5707 case CMD_RDOUBLELLA: 5708 { 5709 double lat = getdbl((unsigned char *)&mb(0)); 5710 double lng = getdbl((unsigned char *)&mb(8)); 5711 t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, lon %f %c, alt %.2fm", 5712 ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), 5713 ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), 5714 getdbl((unsigned char *)&mb(16))); 5715 } 5716 break; 5717 5718 case CMD_RALLINVIEW: 5719 { 5720 int i, sats; 5721 5722 t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); 5723 switch (mb(0) & 0x7) 5724 { 5725 default: 5726 t = ap(pbuffer, sizeof(pbuffer), t, "0x%x", mb(0) & 0x7); 5727 break; 5728 5729 case 3: 5730 t = ap(pbuffer, sizeof(pbuffer), t, "2D"); 5731 break; 5732 5733 case 4: 5734 t = ap(pbuffer, sizeof(pbuffer), t, "3D"); 5735 break; 5736 } 5737 if (mb(0) & 0x8) 5738 t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); 5739 else 5740 t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); 5741 5742 sats = (mb(0)>>4) & 0xF; 5743 5744 t = ap(pbuffer, sizeof(pbuffer), t, "PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f, %d satellite%s in view: ", 5745 getflt((unsigned char *)&mb(1)), 5746 getflt((unsigned char *)&mb(5)), 5747 getflt((unsigned char *)&mb(9)), 5748 getflt((unsigned char *)&mb(13)), 5749 sats, (sats == 1) ? "" : "s"); 5750 5751 for (i=0; i < sats; i++) 5752 { 5753 t = ap(pbuffer, sizeof(pbuffer), t, "%s%02d", i ? ", " : "", mb(17+i)); 5754 if (tr) 5755 tr->ctrack |= (1 << (mb(17+i)-1)); 5756 } 5757 5758 if (tr) 5759 { /* mark for tracking status query */ 5760 tr->qtracking = 1; 5761 } 5762 } 5763 break; 5764 5765 case CMD_RSTATTRACK: 5766 { 5767 t = ap(pbuffer, sizeof(pbuffer), t-2, "[%02d]=\"", mb(0)); /* add index to var name */ 5768 if (getflt((unsigned char *)&mb(4)) < 0.0) 5769 { 5770 t = ap(pbuffer, sizeof(pbuffer), t, "<NO MEASUREMENTS>"); 5771 var_flag &= (u_short)(~DEF); 5772 } 5773 else 5774 { 5775 t = ap(pbuffer, sizeof(pbuffer), t, "ch=%d, acq=%s, eph=%d, signal_level= %5.2f, elevation= %5.2f, azimuth= %6.2f", 5776 (mb(1) & 0xFF)>>3, 5777 mb(2) ? ((mb(2) == 1) ? "ACQ" : "SRCH") : "NEVER", 5778 mb(3), 5779 getflt((unsigned char *)&mb(4)), 5780 getflt((unsigned char *)&mb(12)) * RTOD, 5781 getflt((unsigned char *)&mb(16)) * RTOD); 5782 if (mb(20)) 5783 { 5784 var_flag &= (u_short)(~DEF); 5785 t = ap(pbuffer, sizeof(pbuffer), t, ", OLD"); 5786 } 5787 if (mb(22)) 5788 { 5789 if (mb(22) == 1) 5790 t = ap(pbuffer, sizeof(pbuffer), t, ", BAD PARITY"); 5791 else 5792 if (mb(22) == 2) 5793 t = ap(pbuffer, sizeof(pbuffer), t, ", BAD EPH HEALTH"); 5794 } 5795 if (mb(23)) 5796 t = ap(pbuffer, sizeof(pbuffer), t, ", collecting data"); 5797 } 5798 } 5799 break; 5800 5801 default: 5802 t = ap(pbuffer, sizeof(pbuffer), t, "<UNDECODED>"); 5803 break; 5804 } 5805 5806 t = ap(pbuffer, sizeof(pbuffer), t, "\""); 5807 set_var(&parse->kv, pbuffer, sizeof(pbuffer), var_flag); 5808 } 5809} 5810 5811 5812/**============================================================ 5813 ** RAWDCF support 5814 **/ 5815 5816/*-------------------------------------------------- 5817 * rawdcf_init_1 - set up modem lines for RAWDCF receivers 5818 * SET DTR line 5819 */ 5820#if defined(TIOCMSET) && (defined(TIOCM_DTR) || defined(CIOCM_DTR)) 5821static int 5822rawdcf_init_1( 5823 struct parseunit *parse 5824 ) 5825{ 5826 /* fixed 2000 for using with Linux by Wolfram Pienkoss <wp@bszh.de> */ 5827 /* 5828 * You can use the RS232 to supply the power for a DCF77 receiver. 5829 * Here a voltage between the DTR and the RTS line is used. Unfortunately 5830 * the name has changed from CIOCM_DTR to TIOCM_DTR recently. 5831 */ 5832 int sl232; 5833 5834 if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) 5835 { 5836 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); 5837 return 0; 5838 } 5839 5840#ifdef TIOCM_DTR 5841 sl232 = (sl232 & ~TIOCM_RTS) | TIOCM_DTR; /* turn on DTR, clear RTS for power supply */ 5842#else 5843 sl232 = (sl232 & ~CIOCM_RTS) | CIOCM_DTR; /* turn on DTR, clear RTS for power supply */ 5844#endif 5845 5846 if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) 5847 { 5848 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); 5849 } 5850 return 0; 5851} 5852#else 5853static int 5854rawdcfdtr_init_1( 5855 struct parseunit *parse 5856 ) 5857{ 5858 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: OS interface incapable of setting DTR to power DCF modules", CLK_UNIT(parse->peer)); 5859 return 0; 5860} 5861#endif /* DTR initialisation type */ 5862 5863/*-------------------------------------------------- 5864 * rawdcf_init_2 - set up modem lines for RAWDCF receivers 5865 * CLR DTR line, SET RTS line 5866 */ 5867#if defined(TIOCMSET) && (defined(TIOCM_RTS) || defined(CIOCM_RTS)) 5868static int 5869rawdcf_init_2( 5870 struct parseunit *parse 5871 ) 5872{ 5873 /* fixed 2000 for using with Linux by Wolfram Pienkoss <wp@bszh.de> */ 5874 /* 5875 * You can use the RS232 to supply the power for a DCF77 receiver. 5876 * Here a voltage between the DTR and the RTS line is used. Unfortunately 5877 * the name has changed from CIOCM_DTR to TIOCM_DTR recently. 5878 */ 5879 int sl232; 5880 5881 if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) 5882 { 5883 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); 5884 return 0; 5885 } 5886 5887#ifdef TIOCM_RTS 5888 sl232 = (sl232 & ~TIOCM_DTR) | TIOCM_RTS; /* turn on RTS, clear DTR for power supply */ 5889#else 5890 sl232 = (sl232 & ~CIOCM_DTR) | CIOCM_RTS; /* turn on RTS, clear DTR for power supply */ 5891#endif 5892 5893 if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) 5894 { 5895 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); 5896 } 5897 return 0; 5898} 5899#else 5900static int 5901rawdcf_init_2( 5902 struct parseunit *parse 5903 ) 5904{ 5905 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: OS interface incapable of setting RTS to power DCF modules", CLK_UNIT(parse->peer)); 5906 return 0; 5907} 5908#endif /* DTR initialisation type */ 5909 5910#else /* defined(REFCLOCK) && defined(PARSE) */ 5911NONEMPTY_TRANSLATION_UNIT 5912#endif /* defined(REFCLOCK) && defined(PARSE) */ 5913 5914/* 5915 * History: 5916 * 5917 * refclock_parse.c,v 5918 * Revision 4.81 2009/05/01 10:15:29 kardel 5919 * use new refclock_ppsapi interface 5920 * 5921 * Revision 4.80 2007/08/11 12:06:29 kardel 5922 * update comments wrt/ to PPS 5923 * 5924 * Revision 4.79 2007/08/11 11:52:23 kardel 5925 * - terminate io bindings before io_closeclock() will close our file descriptor 5926 * 5927 * Revision 4.78 2006/12/22 20:08:27 kardel 5928 * Bug 746 (RFE): add configuration for Expert mouseCLOCK USB v2.0 as mode 19 5929 * 5930 * Revision 4.77 2006/08/05 07:44:49 kardel 5931 * support optionally separate PPS devices via /dev/refclockpps-{0..3} 5932 * 5933 * Revision 4.76 2006/06/22 18:40:47 kardel 5934 * clean up signedness (gcc 4) 5935 * 5936 * Revision 4.75 2006/06/22 16:58:10 kardel 5937 * Bug #632: call parse_ppsapi() in parse_ctl() when updating 5938 * the PPS offset. Fix sign of offset passed to kernel. 5939 * 5940 * Revision 4.74 2006/06/18 21:18:37 kardel 5941 * NetBSD Coverity CID 3796: possible NULL deref 5942 * 5943 * Revision 4.73 2006/05/26 14:23:46 kardel 5944 * cleanup of copyright info 5945 * 5946 * Revision 4.72 2006/05/26 14:19:43 kardel 5947 * cleanup of ioctl cruft 5948 * 5949 * Revision 4.71 2006/05/26 14:15:57 kardel 5950 * delay adding refclock to async refclock io after all initializations 5951 * 5952 * Revision 4.70 2006/05/25 18:20:50 kardel 5953 * bug #619 5954 * terminate parse io engine after de-registering 5955 * from refclock io engine 5956 * 5957 * Revision 4.69 2006/05/25 17:28:02 kardel 5958 * complete refclock io structure initialization *before* inserting it into the 5959 * refclock input machine (avoids null pointer deref) (bug #619) 5960 * 5961 * Revision 4.68 2006/05/01 17:02:51 kardel 5962 * copy receiver method also for newlwy created receive buffers 5963 * 5964 * Revision 4.67 2006/05/01 14:37:29 kardel 5965 * If an input buffer parses into more than one message do insert the 5966 * parsed message in a new input buffer instead of processing it 5967 * directly. This avoids deed complicated processing in signal 5968 * handling. 5969 * 5970 * Revision 4.66 2006/03/18 00:45:30 kardel 5971 * coverity fixes found in NetBSD coverity scan 5972 * 5973 * Revision 4.65 2006/01/26 06:08:33 kardel 5974 * output errno on PPS setup failure 5975 * 5976 * Revision 4.64 2005/11/09 20:44:47 kardel 5977 * utilize full PPS timestamp resolution from PPS API 5978 * 5979 * Revision 4.63 2005/10/07 22:10:25 kardel 5980 * bounded buffer implementation 5981 * 5982 * Revision 4.62.2.2 2005/09/25 10:20:16 kardel 5983 * avoid unexpected buffer overflows due to sprintf("%f") on strange floats: 5984 * replace almost all str* and *printf functions be their buffer bounded 5985 * counterparts 5986 * 5987 * Revision 4.62.2.1 2005/08/27 16:19:27 kardel 5988 * limit re-set rate of trimble clocks 5989 * 5990 * Revision 4.62 2005/08/06 17:40:00 kardel 5991 * cleanup size handling wrt/ to buffer boundaries 5992 * 5993 * Revision 4.61 2005/07/27 21:16:19 kardel 5994 * fix a long (> 11 years) misconfiguration wrt/ Meinberg cflag factory 5995 * default setup. CSTOPB was missing for the 7E2 default data format of 5996 * the DCF77 clocks. 5997 * 5998 * Revision 4.60 2005/07/17 21:14:44 kardel 5999 * change contents of version string to include the RCS/CVS Id 6000 * 6001 * Revision 4.59 2005/07/06 06:56:38 kardel 6002 * syntax error 6003 * 6004 * Revision 4.58 2005/07/04 13:10:40 kardel 6005 * fix bug 455: tripping over NULL pointer on cleanup 6006 * fix shadow storage logic for ppsphaseadjust and trustime wrt/ time2 6007 * fix compiler warnings for some platforms wrt/ printf formatstrings and 6008 * varying structure element sizes 6009 * reorder assignment in binding to avoid tripping over NULL pointers 6010 * 6011 * Revision 4.57 2005/06/25 09:25:19 kardel 6012 * sort out log output sequence 6013 * 6014 * Revision 4.56 2005/06/14 21:47:27 kardel 6015 * collect samples only if samples are ok (sync or trusted flywheel) 6016 * propagate pps phase adjustment value to kernel via PPSAPI to help HARDPPS 6017 * en- and dis-able HARDPPS in correlation to receiver sync state 6018 * 6019 * Revision 4.55 2005/06/02 21:28:31 kardel 6020 * clarify trust logic 6021 * 6022 * Revision 4.54 2005/06/02 17:06:49 kardel 6023 * change status reporting to use fixed refclock_report() 6024 * 6025 * Revision 4.53 2005/06/02 16:33:31 kardel 6026 * fix acceptance of clocks unsync clocks right at start 6027 * 6028 * Revision 4.52 2005/05/26 21:55:06 kardel 6029 * cleanup status reporting 6030 * 6031 * Revision 4.51 2005/05/26 19:19:14 kardel 6032 * implement fast refclock startup 6033 * 6034 * Revision 4.50 2005/04/16 20:51:35 kardel 6035 * set hardpps_enable = 1 when binding a kernel PPS source 6036 * 6037 * Revision 4.49 2005/04/16 17:29:26 kardel 6038 * add non polling clock type 18 for just listenning to Meinberg clocks 6039 * 6040 * Revision 4.48 2005/04/16 16:22:27 kardel 6041 * bk sync 20050415 ntp-dev 6042 * 6043 * Revision 4.47 2004/11/29 10:42:48 kardel 6044 * bk sync ntp-dev 20041129 6045 * 6046 * Revision 4.46 2004/11/29 10:26:29 kardel 6047 * keep fudgetime2 in sync with trusttime/ppsphaseadjust depending in flag1 6048 * 6049 * Revision 4.45 2004/11/14 20:53:20 kardel 6050 * clear PPS flags after using them 6051 * 6052 * Revision 4.44 2004/11/14 15:29:41 kardel 6053 * support PPSAPI, upgrade Copyright to Berkeley style 6054 * 6055 * Revision 4.43 2001/05/26 22:53:16 kardel 6056 * 20010526 reconcilation 6057 * 6058 * Revision 4.42 2000/05/14 15:31:51 kardel 6059 * PPSAPI && RAWDCF modemline support 6060 * 6061 * Revision 4.41 2000/04/09 19:50:45 kardel 6062 * fixed rawdcfdtr_init() -> rawdcf_init_1 6063 * 6064 * Revision 4.40 2000/04/09 15:27:55 kardel 6065 * modem line fiddle in rawdcf_init_2 6066 * 6067 * Revision 4.39 2000/03/18 09:16:55 kardel 6068 * PPSAPI integration 6069 * 6070 * Revision 4.38 2000/03/05 20:25:06 kardel 6071 * support PPSAPI 6072 * 6073 * Revision 4.37 2000/03/05 20:11:14 kardel 6074 * 4.0.99g reconcilation 6075 * 6076 * Revision 4.36 1999/11/28 17:18:20 kardel 6077 * disabled burst mode 6078 * 6079 * Revision 4.35 1999/11/28 09:14:14 kardel 6080 * RECON_4_0_98F 6081 * 6082 * Revision 4.34 1999/05/14 06:08:05 kardel 6083 * store current_time in a suitable container (u_long) 6084 * 6085 * Revision 4.33 1999/05/13 21:48:38 kardel 6086 * double the no response timeout interval 6087 * 6088 * Revision 4.32 1999/05/13 20:09:13 kardel 6089 * complain only about missing polls after a full poll interval 6090 * 6091 * Revision 4.31 1999/05/13 19:59:32 kardel 6092 * add clock type 16 for RTS set DTR clr in RAWDCF 6093 * 6094 * Revision 4.30 1999/02/28 20:36:43 kardel 6095 * fixed printf fmt 6096 * 6097 * Revision 4.29 1999/02/28 19:58:23 kardel 6098 * updated copyright information 6099 * 6100 * Revision 4.28 1999/02/28 19:01:50 kardel 6101 * improved debug out on sent Meinberg messages 6102 * 6103 * Revision 4.27 1999/02/28 18:05:55 kardel 6104 * no linux/ppsclock.h stuff 6105 * 6106 * Revision 4.26 1999/02/28 15:27:27 kardel 6107 * wharton clock integration 6108 * 6109 * Revision 4.25 1999/02/28 14:04:46 kardel 6110 * added missing double quotes to UTC information string 6111 * 6112 * Revision 4.24 1999/02/28 12:06:50 kardel 6113 * (parse_control): using gmprettydate instead of prettydate() 6114 * (mk_utcinfo): new function for formatting GPS derived UTC information 6115 * (gps16x_message): changed to use mk_utcinfo() 6116 * (trimbletsip_message): changed to use mk_utcinfo() 6117 * ignoring position information in unsynchronized mode 6118 * (parse_start): augument linux support for optional ASYNC_LOW_LATENCY 6119 * 6120 * Revision 4.23 1999/02/23 19:47:53 kardel 6121 * fixed #endifs 6122 * (stream_receive): fixed formats 6123 * 6124 * Revision 4.22 1999/02/22 06:21:02 kardel 6125 * use new autoconfig symbols 6126 * 6127 * Revision 4.21 1999/02/21 12:18:13 kardel 6128 * 4.91f reconcilation 6129 * 6130 * Revision 4.20 1999/02/21 10:53:36 kardel 6131 * initial Linux PPSkit version 6132 * 6133 * Revision 4.19 1999/02/07 09:10:45 kardel 6134 * clarify STREAMS mitigation rules in comment 6135 * 6136 * Revision 4.18 1998/12/20 23:45:34 kardel 6137 * fix types and warnings 6138 * 6139 * Revision 4.17 1998/11/15 21:24:51 kardel 6140 * cannot access mbg_ routines when CLOCK_MEINBERG 6141 * is not defined 6142 * 6143 * Revision 4.16 1998/11/15 20:28:17 kardel 6144 * Release 4.0.73e13 reconcilation 6145 * 6146 * Revision 4.15 1998/08/22 21:56:08 kardel 6147 * fixed IO handling for non-STREAM IO 6148 * 6149 * Revision 4.14 1998/08/16 19:00:48 kardel 6150 * (gps16x_message): reduced UTC parameter information (dropped A0,A1) 6151 * made uval a local variable (killed one of the last globals) 6152 * (sendetx): added logging of messages when in debug mode 6153 * (trimble_check): added periodic checks to facilitate re-initialization 6154 * (trimbletsip_init): made use of EOL character if in non-kernel operation 6155 * (trimbletsip_message): extended message interpretation 6156 * (getdbl): fixed data conversion 6157 * 6158 * Revision 4.13 1998/08/09 22:29:13 kardel 6159 * Trimble TSIP support 6160 * 6161 * Revision 4.12 1998/07/11 10:05:34 kardel 6162 * Release 4.0.73d reconcilation 6163 * 6164 * Revision 4.11 1998/06/14 21:09:42 kardel 6165 * Sun acc cleanup 6166 * 6167 * Revision 4.10 1998/06/13 12:36:45 kardel 6168 * signed/unsigned, name clashes 6169 * 6170 * Revision 4.9 1998/06/12 15:30:00 kardel 6171 * prototype fixes 6172 * 6173 * Revision 4.8 1998/06/12 11:19:42 kardel 6174 * added direct input processing routine for refclocks in 6175 * order to avaiod that single character io gobbles up all 6176 * receive buffers and drops input data. (Problem started 6177 * with fast machines so a character a buffer was possible 6178 * one of the few cases where faster machines break existing 6179 * allocation algorithms) 6180 * 6181 * Revision 4.7 1998/06/06 18:35:20 kardel 6182 * (parse_start): added BURST mode initialisation 6183 * 6184 * Revision 4.6 1998/05/27 06:12:46 kardel 6185 * RAWDCF_BASEDELAY default added 6186 * old comment removed 6187 * casts for ioctl() 6188 * 6189 * Revision 4.5 1998/05/25 22:05:09 kardel 6190 * RAWDCF_SETDTR option removed 6191 * clock type 14 attempts to set DTR for 6192 * power supply of RAWDCF receivers 6193 * 6194 * Revision 4.4 1998/05/24 16:20:47 kardel 6195 * updated comments referencing Meinberg clocks 6196 * added RAWDCF clock with DTR set option as type 14 6197 * 6198 * Revision 4.3 1998/05/24 10:48:33 kardel 6199 * calibrated CONRAD RAWDCF default fudge factor 6200 * 6201 * Revision 4.2 1998/05/24 09:59:35 kardel 6202 * corrected version information (ntpq support) 6203 * 6204 * Revision 4.1 1998/05/24 09:52:31 kardel 6205 * use fixed format only (new IO model) 6206 * output debug to stdout instead of msyslog() 6207 * don't include >"< in ASCII output in order not to confuse 6208 * ntpq parsing 6209 * 6210 * Revision 4.0 1998/04/10 19:52:11 kardel 6211 * Start 4.0 release version numbering 6212 * 6213 * Revision 1.2 1998/04/10 19:28:04 kardel 6214 * initial NTP VERSION 4 integration of PARSE with GPS166 binary support 6215 * derived from 3.105.1.2 from V3 tree 6216 * 6217 * Revision information 3.1 - 3.105 from log deleted 1998/04/10 kardel 6218 * 6219 */ 6220