gdtoaimp.h revision 187808
1238384Sjkim/**************************************************************** 2280304Sjkim 3280304SjkimThe author of this software is David M. Gay. 4280304Sjkim 5238384SjkimCopyright (C) 1998-2000 by Lucent Technologies 6238384SjkimAll Rights Reserved 7238384Sjkim 8238384SjkimPermission to use, copy, modify, and distribute this software and 9238384Sjkimits documentation for any purpose and without fee is hereby 10238384Sjkimgranted, provided that the above copyright notice appear in all 11238384Sjkimcopies and that both that the copyright notice and this 12238384Sjkimpermission notice and warranty disclaimer appear in supporting 13238384Sjkimdocumentation, and that the name of Lucent or any of its entities 14280304Sjkimnot be used in advertising or publicity pertaining to 15238384Sjkimdistribution of the software without specific, written prior 16238384Sjkimpermission. 17238384Sjkim 18238384SjkimLUCENT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 19238384SjkimINCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. 20238384SjkimIN NO EVENT SHALL LUCENT OR ANY OF ITS ENTITIES BE LIABLE FOR ANY 21238384SjkimSPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 22238384SjkimWHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER 23238384SjkimIN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, 24238384SjkimARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF 25238384SjkimTHIS SOFTWARE. 26238384Sjkim 27238384Sjkim****************************************************************/ 28238384Sjkim 29238384Sjkim/* $FreeBSD: head/contrib/gdtoa/gdtoaimp.h 187808 2009-01-28 04:36:34Z das $ */ 30238384Sjkim 31238384Sjkim/* This is a variation on dtoa.c that converts arbitary binary 32238384Sjkim floating-point formats to and from decimal notation. It uses 33238384Sjkim double-precision arithmetic internally, so there are still 34238384Sjkim various #ifdefs that adapt the calculations to the native 35238384Sjkim double-precision arithmetic (any of IEEE, VAX D_floating, 36238384Sjkim or IBM mainframe arithmetic). 37238384Sjkim 38238384Sjkim Please send bug reports to David M. Gay (dmg at acm dot org, 39238384Sjkim with " at " changed at "@" and " dot " changed to "."). 40238384Sjkim */ 41238384Sjkim 42238384Sjkim/* On a machine with IEEE extended-precision registers, it is 43238384Sjkim * necessary to specify double-precision (53-bit) rounding precision 44238384Sjkim * before invoking strtod or dtoa. If the machine uses (the equivalent 45238384Sjkim * of) Intel 80x87 arithmetic, the call 46238384Sjkim * _control87(PC_53, MCW_PC); 47238384Sjkim * does this with many compilers. Whether this or another call is 48238384Sjkim * appropriate depends on the compiler; for this to work, it may be 49238384Sjkim * necessary to #include "float.h" or another system-dependent header 50238384Sjkim * file. 51238384Sjkim */ 52238384Sjkim 53238384Sjkim/* strtod for IEEE-, VAX-, and IBM-arithmetic machines. 54238384Sjkim * 55238384Sjkim * This strtod returns a nearest machine number to the input decimal 56238384Sjkim * string (or sets errno to ERANGE). With IEEE arithmetic, ties are 57238384Sjkim * broken by the IEEE round-even rule. Otherwise ties are broken by 58238384Sjkim * biased rounding (add half and chop). 59238384Sjkim * 60238384Sjkim * Inspired loosely by William D. Clinger's paper "How to Read Floating 61238384Sjkim * Point Numbers Accurately" [Proc. ACM SIGPLAN '90, pp. 112-126]. 62238384Sjkim * 63238384Sjkim * Modifications: 64238384Sjkim * 65238384Sjkim * 1. We only require IEEE, IBM, or VAX double-precision 66238384Sjkim * arithmetic (not IEEE double-extended). 67238384Sjkim * 2. We get by with floating-point arithmetic in a case that 68238384Sjkim * Clinger missed -- when we're computing d * 10^n 69238384Sjkim * for a small integer d and the integer n is not too 70238384Sjkim * much larger than 22 (the maximum integer k for which 71238384Sjkim * we can represent 10^k exactly), we may be able to 72280304Sjkim * compute (d*10^k) * 10^(e-k) with just one roundoff. 73280304Sjkim * 3. Rather than a bit-at-a-time adjustment of the binary 74280304Sjkim * result in the hard case, we use floating-point 75280304Sjkim * arithmetic to determine the adjustment to within 76238384Sjkim * one bit; only in really hard cases do we need to 77280304Sjkim * compute a second residual. 78280304Sjkim * 4. Because of 3., we don't need a large table of powers of 10 79280304Sjkim * for ten-to-e (just some small tables, e.g. of 10^k 80280304Sjkim * for 0 <= k <= 22). 81280304Sjkim */ 82280304Sjkim 83280304Sjkim/* 84280304Sjkim * #define IEEE_8087 for IEEE-arithmetic machines where the least 85238384Sjkim * significant byte has the lowest address. 86280304Sjkim * #define IEEE_MC68k for IEEE-arithmetic machines where the most 87280304Sjkim * significant byte has the lowest address. 88238384Sjkim * #define Long int on machines with 32-bit ints and 64-bit longs. 89238384Sjkim * #define Sudden_Underflow for IEEE-format machines without gradual 90280304Sjkim * underflow (i.e., that flush to zero on underflow). 91280304Sjkim * #define IBM for IBM mainframe-style floating-point arithmetic. 92238384Sjkim * #define VAX for VAX-style floating-point arithmetic (D_floating). 93306230Sdelphij * #define No_leftright to omit left-right logic in fast floating-point 94306230Sdelphij * computation of dtoa. 95238384Sjkim * #define Check_FLT_ROUNDS if FLT_ROUNDS can assume the values 2 or 3. 96280304Sjkim * #define RND_PRODQUOT to use rnd_prod and rnd_quot (assembly routines 97280304Sjkim * that use extended-precision instructions to compute rounded 98238384Sjkim * products and quotients) with IBM. 99238384Sjkim * #define ROUND_BIASED for IEEE-format with biased rounding. 100280304Sjkim * #define Inaccurate_Divide for IEEE-format with correctly rounded 101280304Sjkim * products but inaccurate quotients, e.g., for Intel i860. 102280304Sjkim * #define NO_LONG_LONG on machines that do not have a "long long" 103280304Sjkim * integer type (of >= 64 bits). On such machines, you can 104238384Sjkim * #define Just_16 to store 16 bits per 32-bit Long when doing 105280304Sjkim * high-precision integer arithmetic. Whether this speeds things 106280304Sjkim * up or slows things down depends on the machine and the number 107280304Sjkim * being converted. If long long is available and the name is 108280304Sjkim * something other than "long long", #define Llong to be the name, 109280304Sjkim * and if "unsigned Llong" does not work as an unsigned version of 110280304Sjkim * Llong, #define #ULLong to be the corresponding unsigned type. 111280304Sjkim * #define KR_headers for old-style C function headers. 112280304Sjkim * #define Bad_float_h if your system lacks a float.h or if it does not 113280304Sjkim * define some or all of DBL_DIG, DBL_MAX_10_EXP, DBL_MAX_EXP, 114280304Sjkim * FLT_RADIX, FLT_ROUNDS, and DBL_MAX. 115280304Sjkim * #define MALLOC your_malloc, where your_malloc(n) acts like malloc(n) 116280304Sjkim * if memory is available and otherwise does something you deem 117280304Sjkim * appropriate. If MALLOC is undefined, malloc will be invoked 118280304Sjkim * directly -- and assumed always to succeed. 119238384Sjkim * #define Omit_Private_Memory to omit logic (added Jan. 1998) for making 120280304Sjkim * memory allocations from a private pool of memory when possible. 121280304Sjkim * When used, the private pool is PRIVATE_MEM bytes long: 2304 bytes, 122238384Sjkim * unless #defined to be a different length. This default length 123238384Sjkim * suffices to get rid of MALLOC calls except for unusual cases, 124280304Sjkim * such as decimal-to-binary conversion of a very long string of 125280304Sjkim * digits. When converting IEEE double precision values, the 126280304Sjkim * longest string gdtoa can return is about 751 bytes long. For 127280304Sjkim * conversions by strtod of strings of 800 digits and all gdtoa 128280304Sjkim * conversions of IEEE doubles in single-threaded executions with 129238384Sjkim * 8-byte pointers, PRIVATE_MEM >= 7400 appears to suffice; with 130238384Sjkim * 4-byte pointers, PRIVATE_MEM >= 7112 appears adequate. 131280304Sjkim * #define NO_INFNAN_CHECK if you do not wish to have INFNAN_CHECK 132280304Sjkim * #defined automatically on IEEE systems. On such systems, 133238384Sjkim * when INFNAN_CHECK is #defined, strtod checks 134280304Sjkim * for Infinity and NaN (case insensitively). 135238384Sjkim * When INFNAN_CHECK is #defined and No_Hex_NaN is not #defined, 136280304Sjkim * strtodg also accepts (case insensitively) strings of the form 137280304Sjkim * NaN(x), where x is a string of hexadecimal digits (optionally 138280304Sjkim * preceded by 0x or 0X) and spaces; if there is only one string 139280304Sjkim * of hexadecimal digits, it is taken for the fraction bits of the 140238384Sjkim * resulting NaN; if there are two or more strings of hexadecimal 141280304Sjkim * digits, each string is assigned to the next available sequence 142280304Sjkim * of 32-bit words of fractions bits (starting with the most 143 * significant), right-aligned in each sequence. 144 * Unless GDTOA_NON_PEDANTIC_NANCHECK is #defined, input "NaN(...)" 145 * is consumed even when ... has the wrong form (in which case the 146 * "(...)" is consumed but ignored). 147 * #define MULTIPLE_THREADS if the system offers preemptively scheduled 148 * multiple threads. In this case, you must provide (or suitably 149 * #define) two locks, acquired by ACQUIRE_DTOA_LOCK(n) and freed 150 * by FREE_DTOA_LOCK(n) for n = 0 or 1. (The second lock, accessed 151 * in pow5mult, ensures lazy evaluation of only one copy of high 152 * powers of 5; omitting this lock would introduce a small 153 * probability of wasting memory, but would otherwise be harmless.) 154 * You must also invoke freedtoa(s) to free the value s returned by 155 * dtoa. You may do so whether or not MULTIPLE_THREADS is #defined. 156 * #define IMPRECISE_INEXACT if you do not care about the setting of 157 * the STRTOG_Inexact bits in the special case of doing IEEE double 158 * precision conversions (which could also be done by the strtod in 159 * dtoa.c). 160 * #define NO_HEX_FP to disable recognition of C9x's hexadecimal 161 * floating-point constants. 162 * #define -DNO_ERRNO to suppress setting errno (in strtod.c and 163 * strtodg.c). 164 * #define NO_STRING_H to use private versions of memcpy. 165 * On some K&R systems, it may also be necessary to 166 * #define DECLARE_SIZE_T in this case. 167 * #define YES_ALIAS to permit aliasing certain double values with 168 * arrays of ULongs. This leads to slightly better code with 169 * some compilers and was always used prior to 19990916, but it 170 * is not strictly legal and can cause trouble with aggressively 171 * optimizing compilers (e.g., gcc 2.95.1 under -O2). 172 * #define USE_LOCALE to use the current locale's decimal_point value. 173 */ 174 175#ifndef GDTOAIMP_H_INCLUDED 176#define GDTOAIMP_H_INCLUDED 177 178#define Long int 179 180#include "gdtoa.h" 181#include "gd_qnan.h" 182#ifdef Honor_FLT_ROUNDS 183#include <fenv.h> 184#endif 185 186#ifdef DEBUG 187#include "stdio.h" 188#define Bug(x) {fprintf(stderr, "%s\n", x); exit(1);} 189#endif 190 191#include "limits.h" 192#include "stdlib.h" 193#include "string.h" 194#include "libc_private.h" 195 196#include "namespace.h" 197#include <pthread.h> 198#include "un-namespace.h" 199 200#ifdef KR_headers 201#define Char char 202#else 203#define Char void 204#endif 205 206#ifdef MALLOC 207extern Char *MALLOC ANSI((size_t)); 208#else 209#define MALLOC malloc 210#endif 211 212#define INFNAN_CHECK 213#define USE_LOCALE 214#define NO_LOCALE_CACHE 215#define Honor_FLT_ROUNDS 216#define Trust_FLT_ROUNDS 217 218#undef IEEE_Arith 219#undef Avoid_Underflow 220#ifdef IEEE_MC68k 221#define IEEE_Arith 222#endif 223#ifdef IEEE_8087 224#define IEEE_Arith 225#endif 226 227#include "errno.h" 228#ifdef Bad_float_h 229 230#ifdef IEEE_Arith 231#define DBL_DIG 15 232#define DBL_MAX_10_EXP 308 233#define DBL_MAX_EXP 1024 234#define FLT_RADIX 2 235#define DBL_MAX 1.7976931348623157e+308 236#endif 237 238#ifdef IBM 239#define DBL_DIG 16 240#define DBL_MAX_10_EXP 75 241#define DBL_MAX_EXP 63 242#define FLT_RADIX 16 243#define DBL_MAX 7.2370055773322621e+75 244#endif 245 246#ifdef VAX 247#define DBL_DIG 16 248#define DBL_MAX_10_EXP 38 249#define DBL_MAX_EXP 127 250#define FLT_RADIX 2 251#define DBL_MAX 1.7014118346046923e+38 252#define n_bigtens 2 253#endif 254 255#ifndef LONG_MAX 256#define LONG_MAX 2147483647 257#endif 258 259#else /* ifndef Bad_float_h */ 260#include "float.h" 261#endif /* Bad_float_h */ 262 263#ifdef IEEE_Arith 264#define Scale_Bit 0x10 265#define n_bigtens 5 266#endif 267 268#ifdef IBM 269#define n_bigtens 3 270#endif 271 272#ifdef VAX 273#define n_bigtens 2 274#endif 275 276#ifndef __MATH_H__ 277#include "math.h" 278#endif 279 280#ifdef __cplusplus 281extern "C" { 282#endif 283 284#if defined(IEEE_8087) + defined(IEEE_MC68k) + defined(VAX) + defined(IBM) != 1 285Exactly one of IEEE_8087, IEEE_MC68k, VAX, or IBM should be defined. 286#endif 287 288typedef union { double d; ULong L[2]; } U; 289 290#ifdef YES_ALIAS 291#define dval(x) x 292#ifdef IEEE_8087 293#define word0(x) ((ULong *)&x)[1] 294#define word1(x) ((ULong *)&x)[0] 295#else 296#define word0(x) ((ULong *)&x)[0] 297#define word1(x) ((ULong *)&x)[1] 298#endif 299#else /* !YES_ALIAS */ 300#ifdef IEEE_8087 301#define word0(x) ((U*)&x)->L[1] 302#define word1(x) ((U*)&x)->L[0] 303#else 304#define word0(x) ((U*)&x)->L[0] 305#define word1(x) ((U*)&x)->L[1] 306#endif 307#define dval(x) ((U*)&x)->d 308#endif /* YES_ALIAS */ 309 310/* The following definition of Storeinc is appropriate for MIPS processors. 311 * An alternative that might be better on some machines is 312 * #define Storeinc(a,b,c) (*a++ = b << 16 | c & 0xffff) 313 */ 314#if defined(IEEE_8087) + defined(VAX) 315#define Storeinc(a,b,c) (((unsigned short *)a)[1] = (unsigned short)b, \ 316((unsigned short *)a)[0] = (unsigned short)c, a++) 317#else 318#define Storeinc(a,b,c) (((unsigned short *)a)[0] = (unsigned short)b, \ 319((unsigned short *)a)[1] = (unsigned short)c, a++) 320#endif 321 322/* #define P DBL_MANT_DIG */ 323/* Ten_pmax = floor(P*log(2)/log(5)) */ 324/* Bletch = (highest power of 2 < DBL_MAX_10_EXP) / 16 */ 325/* Quick_max = floor((P-1)*log(FLT_RADIX)/log(10) - 1) */ 326/* Int_max = floor(P*log(FLT_RADIX)/log(10) - 1) */ 327 328#ifdef IEEE_Arith 329#define Exp_shift 20 330#define Exp_shift1 20 331#define Exp_msk1 0x100000 332#define Exp_msk11 0x100000 333#define Exp_mask 0x7ff00000 334#define P 53 335#define Bias 1023 336#define Emin (-1022) 337#define Exp_1 0x3ff00000 338#define Exp_11 0x3ff00000 339#define Ebits 11 340#define Frac_mask 0xfffff 341#define Frac_mask1 0xfffff 342#define Ten_pmax 22 343#define Bletch 0x10 344#define Bndry_mask 0xfffff 345#define Bndry_mask1 0xfffff 346#define LSB 1 347#define Sign_bit 0x80000000 348#define Log2P 1 349#define Tiny0 0 350#define Tiny1 1 351#define Quick_max 14 352#define Int_max 14 353 354#ifndef Flt_Rounds 355#ifdef FLT_ROUNDS 356#define Flt_Rounds FLT_ROUNDS 357#else 358#define Flt_Rounds 1 359#endif 360#endif /*Flt_Rounds*/ 361 362#else /* ifndef IEEE_Arith */ 363#undef Sudden_Underflow 364#define Sudden_Underflow 365#ifdef IBM 366#undef Flt_Rounds 367#define Flt_Rounds 0 368#define Exp_shift 24 369#define Exp_shift1 24 370#define Exp_msk1 0x1000000 371#define Exp_msk11 0x1000000 372#define Exp_mask 0x7f000000 373#define P 14 374#define Bias 65 375#define Exp_1 0x41000000 376#define Exp_11 0x41000000 377#define Ebits 8 /* exponent has 7 bits, but 8 is the right value in b2d */ 378#define Frac_mask 0xffffff 379#define Frac_mask1 0xffffff 380#define Bletch 4 381#define Ten_pmax 22 382#define Bndry_mask 0xefffff 383#define Bndry_mask1 0xffffff 384#define LSB 1 385#define Sign_bit 0x80000000 386#define Log2P 4 387#define Tiny0 0x100000 388#define Tiny1 0 389#define Quick_max 14 390#define Int_max 15 391#else /* VAX */ 392#undef Flt_Rounds 393#define Flt_Rounds 1 394#define Exp_shift 23 395#define Exp_shift1 7 396#define Exp_msk1 0x80 397#define Exp_msk11 0x800000 398#define Exp_mask 0x7f80 399#define P 56 400#define Bias 129 401#define Exp_1 0x40800000 402#define Exp_11 0x4080 403#define Ebits 8 404#define Frac_mask 0x7fffff 405#define Frac_mask1 0xffff007f 406#define Ten_pmax 24 407#define Bletch 2 408#define Bndry_mask 0xffff007f 409#define Bndry_mask1 0xffff007f 410#define LSB 0x10000 411#define Sign_bit 0x8000 412#define Log2P 1 413#define Tiny0 0x80 414#define Tiny1 0 415#define Quick_max 15 416#define Int_max 15 417#endif /* IBM, VAX */ 418#endif /* IEEE_Arith */ 419 420#ifndef IEEE_Arith 421#define ROUND_BIASED 422#endif 423 424#ifdef RND_PRODQUOT 425#define rounded_product(a,b) a = rnd_prod(a, b) 426#define rounded_quotient(a,b) a = rnd_quot(a, b) 427#ifdef KR_headers 428extern double rnd_prod(), rnd_quot(); 429#else 430extern double rnd_prod(double, double), rnd_quot(double, double); 431#endif 432#else 433#define rounded_product(a,b) a *= b 434#define rounded_quotient(a,b) a /= b 435#endif 436 437#define Big0 (Frac_mask1 | Exp_msk1*(DBL_MAX_EXP+Bias-1)) 438#define Big1 0xffffffff 439 440#undef Pack_16 441#ifndef Pack_32 442#define Pack_32 443#endif 444 445#ifdef NO_LONG_LONG 446#undef ULLong 447#ifdef Just_16 448#undef Pack_32 449#define Pack_16 450/* When Pack_32 is not defined, we store 16 bits per 32-bit Long. 451 * This makes some inner loops simpler and sometimes saves work 452 * during multiplications, but it often seems to make things slightly 453 * slower. Hence the default is now to store 32 bits per Long. 454 */ 455#endif 456#else /* long long available */ 457#ifndef Llong 458#define Llong long long 459#endif 460#ifndef ULLong 461#define ULLong unsigned Llong 462#endif 463#endif /* NO_LONG_LONG */ 464 465#ifdef Pack_32 466#define ULbits 32 467#define kshift 5 468#define kmask 31 469#define ALL_ON 0xffffffff 470#else 471#define ULbits 16 472#define kshift 4 473#define kmask 15 474#define ALL_ON 0xffff 475#endif 476 477#define MULTIPLE_THREADS 478extern pthread_mutex_t __gdtoa_locks[2]; 479#define ACQUIRE_DTOA_LOCK(n) do { \ 480 if (__isthreaded) \ 481 _pthread_mutex_lock(&__gdtoa_locks[n]); \ 482} while(0) 483#define FREE_DTOA_LOCK(n) do { \ 484 if (__isthreaded) \ 485 _pthread_mutex_unlock(&__gdtoa_locks[n]); \ 486} while(0) 487 488#define Kmax 15 489 490 struct 491Bigint { 492 struct Bigint *next; 493 int k, maxwds, sign, wds; 494 ULong x[1]; 495 }; 496 497 typedef struct Bigint Bigint; 498 499#ifdef NO_STRING_H 500#ifdef DECLARE_SIZE_T 501typedef unsigned int size_t; 502#endif 503extern void memcpy_D2A ANSI((void*, const void*, size_t)); 504#define Bcopy(x,y) memcpy_D2A(&x->sign,&y->sign,y->wds*sizeof(ULong) + 2*sizeof(int)) 505#else /* !NO_STRING_H */ 506#define Bcopy(x,y) memcpy(&x->sign,&y->sign,y->wds*sizeof(ULong) + 2*sizeof(int)) 507#endif /* NO_STRING_H */ 508 509/* 510 * Paranoia: Protect exported symbols, including ones in files we don't 511 * compile right now. The standard strtof and strtod survive. 512 */ 513#define dtoa __dtoa 514#define gdtoa __gdtoa 515#define freedtoa __freedtoa 516#define strtodg __strtodg 517#define g_ddfmt __g_ddfmt 518#define g_dfmt __g_dfmt 519#define g_ffmt __g_ffmt 520#define g_Qfmt __g_Qfmt 521#define g_xfmt __g_xfmt 522#define g_xLfmt __g_xLfmt 523#define strtoId __strtoId 524#define strtoIdd __strtoIdd 525#define strtoIf __strtoIf 526#define strtoIQ __strtoIQ 527#define strtoIx __strtoIx 528#define strtoIxL __strtoIxL 529#define strtord __strtord 530#define strtordd __strtordd 531#define strtorf __strtorf 532#define strtorQ __strtorQ 533#define strtorx __strtorx 534#define strtorxL __strtorxL 535#define strtodI __strtodI 536#define strtopd __strtopd 537#define strtopdd __strtopdd 538#define strtopf __strtopf 539#define strtopQ __strtopQ 540#define strtopx __strtopx 541#define strtopxL __strtopxL 542 543/* Protect gdtoa-internal symbols */ 544#define Balloc __Balloc_D2A 545#define Bfree __Bfree_D2A 546#define ULtoQ __ULtoQ_D2A 547#define ULtof __ULtof_D2A 548#define ULtod __ULtod_D2A 549#define ULtodd __ULtodd_D2A 550#define ULtox __ULtox_D2A 551#define ULtoxL __ULtoxL_D2A 552#define any_on __any_on_D2A 553#define b2d __b2d_D2A 554#define bigtens __bigtens_D2A 555#define cmp __cmp_D2A 556#define copybits __copybits_D2A 557#define d2b __d2b_D2A 558#define decrement __decrement_D2A 559#define diff __diff_D2A 560#define dtoa_result __dtoa_result_D2A 561#define g__fmt __g__fmt_D2A 562#define gethex __gethex_D2A 563#define hexdig __hexdig_D2A 564#define hexdig_init_D2A __hexdig_init_D2A 565#define hexnan __hexnan_D2A 566#define hi0bits __hi0bits_D2A 567#define hi0bits_D2A __hi0bits_D2A 568#define i2b __i2b_D2A 569#define increment __increment_D2A 570#define lo0bits __lo0bits_D2A 571#define lshift __lshift_D2A 572#define match __match_D2A 573#define mult __mult_D2A 574#define multadd __multadd_D2A 575#define nrv_alloc __nrv_alloc_D2A 576#define pow5mult __pow5mult_D2A 577#define quorem __quorem_D2A 578#define ratio __ratio_D2A 579#define rshift __rshift_D2A 580#define rv_alloc __rv_alloc_D2A 581#define s2b __s2b_D2A 582#define set_ones __set_ones_D2A 583#define strcp __strcp_D2A 584#define strcp_D2A __strcp_D2A 585#define strtoIg __strtoIg_D2A 586#define sum __sum_D2A 587#define tens __tens_D2A 588#define tinytens __tinytens_D2A 589#define tinytens __tinytens_D2A 590#define trailz __trailz_D2A 591#define ulp __ulp_D2A 592 593 extern char *dtoa_result; 594 extern CONST double bigtens[], tens[], tinytens[]; 595 extern unsigned char hexdig[]; 596 597 extern Bigint *Balloc ANSI((int)); 598 extern void Bfree ANSI((Bigint*)); 599 extern void ULtof ANSI((ULong*, ULong*, Long, int)); 600 extern void ULtod ANSI((ULong*, ULong*, Long, int)); 601 extern void ULtodd ANSI((ULong*, ULong*, Long, int)); 602 extern void ULtoQ ANSI((ULong*, ULong*, Long, int)); 603 extern void ULtox ANSI((UShort*, ULong*, Long, int)); 604 extern void ULtoxL ANSI((ULong*, ULong*, Long, int)); 605 extern ULong any_on ANSI((Bigint*, int)); 606 extern double b2d ANSI((Bigint*, int*)); 607 extern int cmp ANSI((Bigint*, Bigint*)); 608 extern void copybits ANSI((ULong*, int, Bigint*)); 609 extern Bigint *d2b ANSI((double, int*, int*)); 610 extern void decrement ANSI((Bigint*)); 611 extern Bigint *diff ANSI((Bigint*, Bigint*)); 612 extern char *dtoa ANSI((double d, int mode, int ndigits, 613 int *decpt, int *sign, char **rve)); 614 extern void freedtoa ANSI((char*)); 615 extern char *gdtoa ANSI((FPI *fpi, int be, ULong *bits, int *kindp, 616 int mode, int ndigits, int *decpt, char **rve)); 617 extern char *g__fmt ANSI((char*, char*, char*, int, ULong, size_t)); 618 extern int gethex ANSI((CONST char**, FPI*, Long*, Bigint**, int)); 619 extern void hexdig_init_D2A(Void); 620 extern int hexnan ANSI((CONST char**, FPI*, ULong*)); 621 extern int hi0bits ANSI((ULong)); 622 extern Bigint *i2b ANSI((int)); 623 extern Bigint *increment ANSI((Bigint*)); 624 extern int lo0bits ANSI((ULong*)); 625 extern Bigint *lshift ANSI((Bigint*, int)); 626 extern int match ANSI((CONST char**, char*)); 627 extern Bigint *mult ANSI((Bigint*, Bigint*)); 628 extern Bigint *multadd ANSI((Bigint*, int, int)); 629 extern char *nrv_alloc ANSI((char*, char **, int)); 630 extern Bigint *pow5mult ANSI((Bigint*, int)); 631 extern int quorem ANSI((Bigint*, Bigint*)); 632 extern double ratio ANSI((Bigint*, Bigint*)); 633 extern void rshift ANSI((Bigint*, int)); 634 extern char *rv_alloc ANSI((int)); 635 extern Bigint *s2b ANSI((CONST char*, int, int, ULong, int)); 636 extern Bigint *set_ones ANSI((Bigint*, int)); 637 extern char *strcp ANSI((char*, const char*)); 638 extern int strtodg ANSI((CONST char*, char**, FPI*, Long*, ULong*)); 639 640 extern int strtoId ANSI((CONST char *, char **, double *, double *)); 641 extern int strtoIdd ANSI((CONST char *, char **, double *, double *)); 642 extern int strtoIf ANSI((CONST char *, char **, float *, float *)); 643 extern int strtoIg ANSI((CONST char*, char**, FPI*, Long*, Bigint**, int*)); 644 extern int strtoIQ ANSI((CONST char *, char **, void *, void *)); 645 extern int strtoIx ANSI((CONST char *, char **, void *, void *)); 646 extern int strtoIxL ANSI((CONST char *, char **, void *, void *)); 647 extern double strtod ANSI((const char *s00, char **se)); 648 extern int strtopQ ANSI((CONST char *, char **, Void *)); 649 extern int strtopf ANSI((CONST char *, char **, float *)); 650 extern int strtopd ANSI((CONST char *, char **, double *)); 651 extern int strtopdd ANSI((CONST char *, char **, double *)); 652 extern int strtopx ANSI((CONST char *, char **, Void *)); 653 extern int strtopxL ANSI((CONST char *, char **, Void *)); 654 extern int strtord ANSI((CONST char *, char **, int, double *)); 655 extern int strtordd ANSI((CONST char *, char **, int, double *)); 656 extern int strtorf ANSI((CONST char *, char **, int, float *)); 657 extern int strtorQ ANSI((CONST char *, char **, int, void *)); 658 extern int strtorx ANSI((CONST char *, char **, int, void *)); 659 extern int strtorxL ANSI((CONST char *, char **, int, void *)); 660 extern Bigint *sum ANSI((Bigint*, Bigint*)); 661 extern int trailz ANSI((Bigint*)); 662 extern double ulp ANSI((double)); 663 664#ifdef __cplusplus 665} 666#endif 667/* 668 * NAN_WORD0 and NAN_WORD1 are only referenced in strtod.c. Prior to 669 * 20050115, they used to be hard-wired here (to 0x7ff80000 and 0, 670 * respectively), but now are determined by compiling and running 671 * qnan.c to generate gd_qnan.h, which specifies d_QNAN0 and d_QNAN1. 672 * Formerly gdtoaimp.h recommended supplying suitable -DNAN_WORD0=... 673 * and -DNAN_WORD1=... values if necessary. This should still work. 674 * (On HP Series 700/800 machines, -DNAN_WORD0=0x7ff40000 works.) 675 */ 676#ifdef IEEE_Arith 677#ifndef NO_INFNAN_CHECK 678#undef INFNAN_CHECK 679#define INFNAN_CHECK 680#endif 681#ifdef IEEE_MC68k 682#define _0 0 683#define _1 1 684#ifndef NAN_WORD0 685#define NAN_WORD0 d_QNAN0 686#endif 687#ifndef NAN_WORD1 688#define NAN_WORD1 d_QNAN1 689#endif 690#else 691#define _0 1 692#define _1 0 693#ifndef NAN_WORD0 694#define NAN_WORD0 d_QNAN1 695#endif 696#ifndef NAN_WORD1 697#define NAN_WORD1 d_QNAN0 698#endif 699#endif 700#else 701#undef INFNAN_CHECK 702#endif 703 704#undef SI 705#ifdef Sudden_Underflow 706#define SI 1 707#else 708#define SI 0 709#endif 710 711#endif /* GDTOAIMP_H_INCLUDED */ 712