1/*-
2 * Copyright (c) 2016-2017 Ruslan Bukin <br@bsdpad.com>
3 * All rights reserved.
4 * Copyright (c) 2019 Mitchell Horne <mhorne@FreeBSD.org>
5 *
6 * Portions of this software were developed by SRI International and the
7 * University of Cambridge Computer Laboratory under DARPA/AFRL contract
8 * FA8750-10-C-0237 ("CTSRD"), as part of the DARPA CRASH research programme.
9 *
10 * Portions of this software were developed by the University of Cambridge
11 * Computer Laboratory as part of the CTSRD Project, with support from the
12 * UK Higher Education Innovation Fund (HEIF).
13 *
14 * Redistribution and use in source and binary forms, with or without
15 * modification, are permitted provided that the following conditions
16 * are met:
17 * 1. Redistributions of source code must retain the above copyright
18 *    notice, this list of conditions and the following disclaimer.
19 * 2. Redistributions in binary form must reproduce the above copyright
20 *    notice, this list of conditions and the following disclaimer in the
21 *    documentation and/or other materials provided with the distribution.
22 *
23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * SUCH DAMAGE.
34 *
35 * $FreeBSD$
36 */
37
38#ifndef _MACHINE_SBI_H_
39#define	_MACHINE_SBI_H_
40
41/* SBI Specification Version */
42#define	SBI_SPEC_VERS_MAJOR_OFFSET	24
43#define	SBI_SPEC_VERS_MAJOR_MASK	(0x7F << SBI_SPEC_VERS_MAJOR_OFFSET)
44#define	SBI_SPEC_VERS_MINOR_OFFSET	0
45#define	SBI_SPEC_VERS_MINOR_MASK	(0xFFFFFF << SBI_SPEC_VERS_MINOR_OFFSET)
46
47/* SBI Implementation IDs */
48#define	SBI_IMPL_ID_BBL			0
49#define	SBI_IMPL_ID_OPENSBI		1
50#define	SBI_IMPL_ID_XVISOR		2
51#define	SBI_IMPL_ID_KVM			3
52#define	SBI_IMPL_ID_RUSTSBI		4
53#define	SBI_IMPL_ID_DIOSIX		5
54
55/* SBI Error Codes */
56#define	SBI_SUCCESS			0
57#define	SBI_ERR_FAILURE			-1
58#define	SBI_ERR_NOT_SUPPORTED		-2
59#define	SBI_ERR_INVALID_PARAM		-3
60#define	SBI_ERR_DENIED			-4
61#define	SBI_ERR_INVALID_ADDRESS		-5
62#define	SBI_ERR_ALREADY_AVAILABLE	-6
63
64/* SBI Base Extension */
65#define	SBI_EXT_ID_BASE			0x10
66#define	SBI_BASE_GET_SPEC_VERSION	0
67#define	SBI_BASE_GET_IMPL_ID		1
68#define	SBI_BASE_GET_IMPL_VERSION	2
69#define	SBI_BASE_PROBE_EXTENSION	3
70#define	SBI_BASE_GET_MVENDORID		4
71#define	SBI_BASE_GET_MARCHID		5
72#define	SBI_BASE_GET_MIMPID		6
73
74/* Timer (TIME) Extension */
75#define	SBI_EXT_ID_TIME			0x54494D45
76#define	SBI_TIME_SET_TIMER		0
77
78/* IPI (IPI) Extension */
79#define	SBI_EXT_ID_IPI			0x735049
80#define	SBI_IPI_SEND_IPI		0
81
82/* RFENCE (RFNC) Extension */
83#define	SBI_EXT_ID_RFNC				0x52464E43
84#define	SBI_RFNC_REMOTE_FENCE_I			0
85#define	SBI_RFNC_REMOTE_SFENCE_VMA		1
86#define	SBI_RFNC_REMOTE_SFENCE_VMA_ASID		2
87#define	SBI_RFNC_REMOTE_HFENCE_GVMA_VMID	3
88#define	SBI_RFNC_REMOTE_HFENCE_GVMA		4
89#define	SBI_RFNC_REMOTE_HFENCE_VVMA_ASID	5
90#define	SBI_RFNC_REMOTE_HFENCE_VVMA		6
91
92/* Hart State Management (HSM) Extension */
93#define	SBI_EXT_ID_HSM			0x48534D
94#define	SBI_HSM_HART_START		0
95#define	SBI_HSM_HART_STOP		1
96#define	SBI_HSM_HART_STATUS		2
97#define	 SBI_HSM_STATUS_STARTED		0
98#define	 SBI_HSM_STATUS_STOPPED		1
99#define	 SBI_HSM_STATUS_START_PENDING	2
100#define	 SBI_HSM_STATUS_STOP_PENDING	3
101
102/* System Reset (SRST) Extension */
103#define	SBI_EXT_ID_SRST			0x53525354
104#define	SBI_SRST_SYSTEM_RESET		0
105#define	 SBI_SRST_TYPE_SHUTDOWN		0
106#define	 SBI_SRST_TYPE_COLD_REBOOT	1
107#define	 SBI_SRST_TYPE_WARM_REBOOT	2
108#define	 SBI_SRST_REASON_NONE		0
109#define	 SBI_SRST_REASON_SYSTEM_FAILURE	1
110
111/* Legacy Extensions */
112#define	SBI_SET_TIMER			0
113#define	SBI_CONSOLE_PUTCHAR		1
114#define	SBI_CONSOLE_GETCHAR		2
115#define	SBI_CLEAR_IPI			3
116#define	SBI_SEND_IPI			4
117#define	SBI_REMOTE_FENCE_I		5
118#define	SBI_REMOTE_SFENCE_VMA		6
119#define	SBI_REMOTE_SFENCE_VMA_ASID	7
120#define	SBI_SHUTDOWN			8
121
122#define	SBI_CALL0(e, f)				SBI_CALL5(e, f, 0, 0, 0, 0, 0)
123#define	SBI_CALL1(e, f, p1)			SBI_CALL5(e, f, p1, 0, 0, 0, 0)
124#define	SBI_CALL2(e, f, p1, p2)			SBI_CALL5(e, f, p1, p2, 0, 0, 0)
125#define	SBI_CALL3(e, f, p1, p2, p3)		SBI_CALL5(e, f, p1, p2, p3, 0, 0)
126#define	SBI_CALL4(e, f, p1, p2, p3, p4)		SBI_CALL5(e, f, p1, p2, p3, p4, 0)
127#define	SBI_CALL5(e, f, p1, p2, p3, p4, p5)	sbi_call(e, f, p1, p2, p3, p4, p5)
128
129/*
130 * Documentation available at
131 * https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
132 */
133
134struct sbi_ret {
135	long error;
136	long value;
137};
138
139static __inline struct sbi_ret
140sbi_call(uint64_t arg7, uint64_t arg6, uint64_t arg0, uint64_t arg1,
141    uint64_t arg2, uint64_t arg3, uint64_t arg4)
142{
143	struct sbi_ret ret;
144
145	register uintptr_t a0 __asm ("a0") = (uintptr_t)(arg0);
146	register uintptr_t a1 __asm ("a1") = (uintptr_t)(arg1);
147	register uintptr_t a2 __asm ("a2") = (uintptr_t)(arg2);
148	register uintptr_t a3 __asm ("a3") = (uintptr_t)(arg3);
149	register uintptr_t a4 __asm ("a4") = (uintptr_t)(arg4);
150	register uintptr_t a6 __asm ("a6") = (uintptr_t)(arg6);
151	register uintptr_t a7 __asm ("a7") = (uintptr_t)(arg7);
152
153	__asm __volatile(			\
154		"ecall"				\
155		:"+r"(a0), "+r"(a1)		\
156		:"r"(a2), "r"(a3), "r"(a4), "r"(a6), "r"(a7)	\
157		:"memory");
158
159	ret.error = a0;
160	ret.value = a1;
161	return (ret);
162}
163
164/* Base extension functions and variables. */
165extern u_long sbi_spec_version;
166extern u_long sbi_impl_id;
167extern u_long sbi_impl_version;
168
169static __inline long
170sbi_probe_extension(long id)
171{
172	return (SBI_CALL1(SBI_EXT_ID_BASE, SBI_BASE_PROBE_EXTENSION, id).value);
173}
174
175/* TIME extension functions. */
176void sbi_set_timer(uint64_t val);
177
178/* IPI extension functions. */
179void sbi_send_ipi(const u_long *hart_mask);
180
181/* RFENCE extension functions. */
182void sbi_remote_fence_i(const u_long *hart_mask);
183void sbi_remote_sfence_vma(const u_long *hart_mask, u_long start, u_long size);
184void sbi_remote_sfence_vma_asid(const u_long *hart_mask, u_long start,
185    u_long size, u_long asid);
186
187/* Hart State Management extension functions. */
188
189/*
190 * Start execution on the specified hart at physical address start_addr. The
191 * register a0 will contain the hart's ID, and a1 will contain the value of
192 * priv.
193 */
194int sbi_hsm_hart_start(u_long hart, u_long start_addr, u_long priv);
195
196/*
197 * Stop execution on the current hart. Interrupts should be disabled, or this
198 * function may return.
199 */
200void sbi_hsm_hart_stop(void);
201
202/*
203 * Get the execution status of the specified hart. The status will be one of:
204 *  - SBI_HSM_STATUS_STARTED
205 *  - SBI_HSM_STATUS_STOPPED
206 *  - SBI_HSM_STATUS_START_PENDING
207 *  - SBI_HSM_STATUS_STOP_PENDING
208 */
209int sbi_hsm_hart_status(u_long hart);
210
211/* System Reset extension functions. */
212
213/*
214 * Reset the system based on the following 'type' and 'reason' chosen from:
215 *  - SBI_SRST_TYPE_SHUTDOWN
216 *  - SBI_SRST_TYPE_COLD_REBOOT
217 *  - SBI_SRST_TYPE_WARM_REBOOT
218 *  - SBI_SRST_REASON_NONE
219 *  - SBI_SRST_REASON_SYSTEM_FAILURE
220 */
221void sbi_system_reset(u_long reset_type, u_long reset_reason);
222
223/* Legacy extension functions. */
224static __inline void
225sbi_console_putchar(int ch)
226{
227
228	(void)SBI_CALL1(SBI_CONSOLE_PUTCHAR, 0, ch);
229}
230
231static __inline int
232sbi_console_getchar(void)
233{
234
235	/*
236	 * XXX: The "error" is returned here because legacy SBI functions
237	 * continue to return their value in a0.
238	 */
239	return (SBI_CALL0(SBI_CONSOLE_GETCHAR, 0).error);
240}
241
242void sbi_print_version(void);
243void sbi_init(void);
244
245#endif /* !_MACHINE_SBI_H_ */
246