1/*-
2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3 *
4 * Copyright (c) 2002-2009 Luigi Rizzo, Universita` di Pisa
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 * $FreeBSD$
28 */
29
30#ifndef _IPFW2_H
31#define _IPFW2_H
32
33/*
34 * The default rule number.  By the design of ip_fw, the default rule
35 * is the last one, so its number can also serve as the highest number
36 * allowed for a rule.  The ip_fw code relies on both meanings of this
37 * constant.
38 */
39#define	IPFW_DEFAULT_RULE	65535
40
41#define	RESVD_SET		31	/*set for default and persistent rules*/
42#define	IPFW_MAX_SETS		32	/* Number of sets supported by ipfw*/
43
44/*
45 * Compat values for old clients
46 */
47#ifndef	_KERNEL
48#define	IPFW_TABLES_MAX		65535
49#define	IPFW_TABLES_DEFAULT	128
50#endif
51
52/*
53 * Most commands (queue, pipe, tag, untag, limit...) can have a 16-bit
54 * argument between 1 and 65534. The value 0 (IP_FW_TARG) is used
55 * to represent 'tablearg' value, e.g.  indicate the use of a 'tablearg'
56 * result of the most recent table() lookup.
57 * Note that 16bit is only a historical limit, resulting from
58 * the use of a 16-bit fields for that value. In reality, we can have
59 * 2^32 pipes, queues, tag values and so on.
60 */
61#define	IPFW_ARG_MIN		1
62#define	IPFW_ARG_MAX		65534
63#define IP_FW_TABLEARG		65535	/* Compat value for old clients */
64#define	IP_FW_TARG		0	/* Current tablearg value */
65#define	IP_FW_NAT44_GLOBAL	65535	/* arg1 value for "nat global" */
66
67/*
68 * Number of entries in the call stack of the call/return commands.
69 * Call stack currently is an uint16_t array with rule numbers.
70 */
71#define	IPFW_CALLSTACK_SIZE	16
72
73/* IP_FW3 header/opcodes */
74typedef struct _ip_fw3_opheader {
75	uint16_t opcode;	/* Operation opcode */
76	uint16_t version;	/* Opcode version */
77	uint16_t reserved[2];	/* Align to 64-bit boundary */
78} ip_fw3_opheader;
79
80/* IP_FW3 opcodes */
81#define	IP_FW_TABLE_XADD	86	/* add entry */
82#define	IP_FW_TABLE_XDEL	87	/* delete entry */
83#define	IP_FW_TABLE_XGETSIZE	88	/* get table size (deprecated) */
84#define	IP_FW_TABLE_XLIST	89	/* list table contents */
85#define	IP_FW_TABLE_XDESTROY	90	/* destroy table */
86#define	IP_FW_TABLES_XLIST	92	/* list all tables  */
87#define	IP_FW_TABLE_XINFO	93	/* request info for one table */
88#define	IP_FW_TABLE_XFLUSH	94	/* flush table data */
89#define	IP_FW_TABLE_XCREATE	95	/* create new table  */
90#define	IP_FW_TABLE_XMODIFY	96	/* modify existing table */
91#define	IP_FW_XGET		97	/* Retrieve configuration */
92#define	IP_FW_XADD		98	/* add rule */
93#define	IP_FW_XDEL		99	/* del rule */
94#define	IP_FW_XMOVE		100	/* move rules to different set  */
95#define	IP_FW_XZERO		101	/* clear accounting */
96#define	IP_FW_XRESETLOG		102	/* zero rules logs */
97#define	IP_FW_SET_SWAP		103	/* Swap between 2 sets */
98#define	IP_FW_SET_MOVE		104	/* Move one set to another one */
99#define	IP_FW_SET_ENABLE	105	/* Enable/disable sets */
100#define	IP_FW_TABLE_XFIND	106	/* finds an entry */
101#define	IP_FW_XIFLIST		107	/* list tracked interfaces */
102#define	IP_FW_TABLES_ALIST	108	/* list table algorithms */
103#define	IP_FW_TABLE_XSWAP	109	/* swap two tables */
104#define	IP_FW_TABLE_VLIST	110	/* dump table value hash */
105
106#define	IP_FW_NAT44_XCONFIG	111	/* Create/modify NAT44 instance */
107#define	IP_FW_NAT44_DESTROY	112	/* Destroys NAT44 instance */
108#define	IP_FW_NAT44_XGETCONFIG	113	/* Get NAT44 instance config */
109#define	IP_FW_NAT44_LIST_NAT	114	/* List all NAT44 instances */
110#define	IP_FW_NAT44_XGETLOG	115	/* Get log from NAT44 instance */
111
112#define	IP_FW_DUMP_SOPTCODES	116	/* Dump available sopts/versions */
113#define	IP_FW_DUMP_SRVOBJECTS	117	/* Dump existing named objects */
114
115#define	IP_FW_NAT64STL_CREATE	130	/* Create stateless NAT64 instance */
116#define	IP_FW_NAT64STL_DESTROY	131	/* Destroy stateless NAT64 instance */
117#define	IP_FW_NAT64STL_CONFIG	132	/* Modify stateless NAT64 instance */
118#define	IP_FW_NAT64STL_LIST	133	/* List stateless NAT64 instances */
119#define	IP_FW_NAT64STL_STATS	134	/* Get NAT64STL instance statistics */
120#define	IP_FW_NAT64STL_RESET_STATS 135	/* Reset NAT64STL instance statistics */
121
122#define	IP_FW_NAT64LSN_CREATE	140	/* Create stateful NAT64 instance */
123#define	IP_FW_NAT64LSN_DESTROY	141	/* Destroy stateful NAT64 instance */
124#define	IP_FW_NAT64LSN_CONFIG	142	/* Modify stateful NAT64 instance */
125#define	IP_FW_NAT64LSN_LIST	143	/* List stateful NAT64 instances */
126#define	IP_FW_NAT64LSN_STATS	144	/* Get NAT64LSN instance statistics */
127#define	IP_FW_NAT64LSN_LIST_STATES 145	/* Get stateful NAT64 states */
128#define	IP_FW_NAT64LSN_RESET_STATS 146	/* Reset NAT64LSN instance statistics */
129
130#define	IP_FW_NPTV6_CREATE	150	/* Create NPTv6 instance */
131#define	IP_FW_NPTV6_DESTROY	151	/* Destroy NPTv6 instance */
132#define	IP_FW_NPTV6_CONFIG	152	/* Modify NPTv6 instance */
133#define	IP_FW_NPTV6_LIST	153	/* List NPTv6 instances */
134#define	IP_FW_NPTV6_STATS	154	/* Get NPTv6 instance statistics */
135#define	IP_FW_NPTV6_RESET_STATS	155	/* Reset NPTv6 instance statistics */
136
137#define	IP_FW_NAT64CLAT_CREATE	160	/* Create clat NAT64 instance */
138#define	IP_FW_NAT64CLAT_DESTROY	161	/* Destroy clat NAT64 instance */
139#define	IP_FW_NAT64CLAT_CONFIG	162	/* Modify clat NAT64 instance */
140#define	IP_FW_NAT64CLAT_LIST	163	/* List clat NAT64 instances */
141#define	IP_FW_NAT64CLAT_STATS	164	/* Get NAT64CLAT instance statistics */
142#define	IP_FW_NAT64CLAT_RESET_STATS 165	/* Reset NAT64CLAT instance statistics */
143
144/*
145 * The kernel representation of ipfw rules is made of a list of
146 * 'instructions' (for all practical purposes equivalent to BPF
147 * instructions), which specify which fields of the packet
148 * (or its metadata) should be analysed.
149 *
150 * Each instruction is stored in a structure which begins with
151 * "ipfw_insn", and can contain extra fields depending on the
152 * instruction type (listed below).
153 * Note that the code is written so that individual instructions
154 * have a size which is a multiple of 32 bits. This means that, if
155 * such structures contain pointers or other 64-bit entities,
156 * (there is just one instance now) they may end up unaligned on
157 * 64-bit architectures, so the must be handled with care.
158 *
159 * "enum ipfw_opcodes" are the opcodes supported. We can have up
160 * to 256 different opcodes. When adding new opcodes, they should
161 * be appended to the end of the opcode list before O_LAST_OPCODE,
162 * this will prevent the ABI from being broken, otherwise users
163 * will have to recompile ipfw(8) when they update the kernel.
164 */
165
166enum ipfw_opcodes {		/* arguments (4 byte each)	*/
167	O_NOP,
168
169	O_IP_SRC,		/* u32 = IP			*/
170	O_IP_SRC_MASK,		/* ip = IP/mask			*/
171	O_IP_SRC_ME,		/* none				*/
172	O_IP_SRC_SET,		/* u32=base, arg1=len, bitmap	*/
173
174	O_IP_DST,		/* u32 = IP			*/
175	O_IP_DST_MASK,		/* ip = IP/mask			*/
176	O_IP_DST_ME,		/* none				*/
177	O_IP_DST_SET,		/* u32=base, arg1=len, bitmap	*/
178
179	O_IP_SRCPORT,		/* (n)port list:mask 4 byte ea	*/
180	O_IP_DSTPORT,		/* (n)port list:mask 4 byte ea	*/
181	O_PROTO,		/* arg1=protocol		*/
182
183	O_MACADDR2,		/* 2 mac addr:mask		*/
184	O_MAC_TYPE,		/* same as srcport		*/
185
186	O_LAYER2,		/* none				*/
187	O_IN,			/* none				*/
188	O_FRAG,			/* none				*/
189
190	O_RECV,			/* none				*/
191	O_XMIT,			/* none				*/
192	O_VIA,			/* none				*/
193
194	O_IPOPT,		/* arg1 = 2*u8 bitmap		*/
195	O_IPLEN,		/* arg1 = len			*/
196	O_IPID,			/* arg1 = id			*/
197
198	O_IPTOS,		/* arg1 = id			*/
199	O_IPPRECEDENCE,		/* arg1 = precedence << 5	*/
200	O_IPTTL,		/* arg1 = TTL			*/
201
202	O_IPVER,		/* arg1 = version		*/
203	O_UID,			/* u32 = id			*/
204	O_GID,			/* u32 = id			*/
205	O_ESTAB,		/* none (tcp established)	*/
206	O_TCPFLAGS,		/* arg1 = 2*u8 bitmap		*/
207	O_TCPWIN,		/* arg1 = desired win		*/
208	O_TCPSEQ,		/* u32 = desired seq.		*/
209	O_TCPACK,		/* u32 = desired seq.		*/
210	O_ICMPTYPE,		/* u32 = icmp bitmap		*/
211	O_TCPOPTS,		/* arg1 = 2*u8 bitmap		*/
212
213	O_VERREVPATH,		/* none				*/
214	O_VERSRCREACH,		/* none				*/
215
216	O_PROBE_STATE,		/* none				*/
217	O_KEEP_STATE,		/* none				*/
218	O_LIMIT,		/* ipfw_insn_limit		*/
219	O_LIMIT_PARENT,		/* dyn_type, not an opcode.	*/
220
221	/*
222	 * These are really 'actions'.
223	 */
224
225	O_LOG,			/* ipfw_insn_log		*/
226	O_PROB,			/* u32 = match probability	*/
227
228	O_CHECK_STATE,		/* none				*/
229	O_ACCEPT,		/* none				*/
230	O_DENY,			/* none 			*/
231	O_REJECT,		/* arg1=icmp arg (same as deny)	*/
232	O_COUNT,		/* none				*/
233	O_SKIPTO,		/* arg1=next rule number	*/
234	O_PIPE,			/* arg1=pipe number		*/
235	O_QUEUE,		/* arg1=queue number		*/
236	O_DIVERT,		/* arg1=port number		*/
237	O_TEE,			/* arg1=port number		*/
238	O_FORWARD_IP,		/* fwd sockaddr			*/
239	O_FORWARD_MAC,		/* fwd mac			*/
240	O_NAT,                  /* nope                         */
241	O_REASS,                /* none                         */
242
243	/*
244	 * More opcodes.
245	 */
246	O_IPSEC,		/* has ipsec history 		*/
247	O_IP_SRC_LOOKUP,	/* arg1=table number, u32=value	*/
248	O_IP_DST_LOOKUP,	/* arg1=table number, u32=value	*/
249	O_ANTISPOOF,		/* none				*/
250	O_JAIL,			/* u32 = id			*/
251	O_ALTQ,			/* u32 = altq classif. qid	*/
252	O_DIVERTED,		/* arg1=bitmap (1:loop, 2:out)	*/
253	O_TCPDATALEN,		/* arg1 = tcp data len		*/
254	O_IP6_SRC,		/* address without mask		*/
255	O_IP6_SRC_ME,		/* my addresses			*/
256	O_IP6_SRC_MASK,		/* address with the mask	*/
257	O_IP6_DST,
258	O_IP6_DST_ME,
259	O_IP6_DST_MASK,
260	O_FLOW6ID,		/* for flow id tag in the ipv6 pkt */
261	O_ICMP6TYPE,		/* icmp6 packet type filtering	*/
262	O_EXT_HDR,		/* filtering for ipv6 extension header */
263	O_IP6,
264
265	/*
266	 * actions for ng_ipfw
267	 */
268	O_NETGRAPH,		/* send to ng_ipfw		*/
269	O_NGTEE,		/* copy to ng_ipfw		*/
270
271	O_IP4,
272
273	O_UNREACH6,		/* arg1=icmpv6 code arg (deny)  */
274
275	O_TAG,   		/* arg1=tag number */
276	O_TAGGED,		/* arg1=tag number */
277
278	O_SETFIB,		/* arg1=FIB number */
279	O_FIB,			/* arg1=FIB desired fib number */
280
281	O_SOCKARG,		/* socket argument */
282
283	O_CALLRETURN,		/* arg1=called rule number */
284
285	O_FORWARD_IP6,		/* fwd sockaddr_in6             */
286
287	O_DSCP,			/* 2 u32 = DSCP mask */
288	O_SETDSCP,		/* arg1=DSCP value */
289	O_IP_FLOW_LOOKUP,	/* arg1=table number, u32=value	*/
290
291	O_EXTERNAL_ACTION,	/* arg1=id of external action handler */
292	O_EXTERNAL_INSTANCE,	/* arg1=id of eaction handler instance */
293	O_EXTERNAL_DATA,	/* variable length data */
294
295	O_SKIP_ACTION,		/* none				*/
296	O_TCPMSS,		/* arg1=MSS value */
297
298	O_LAST_OPCODE		/* not an opcode!		*/
299};
300
301/*
302 * The extension header are filtered only for presence using a bit
303 * vector with a flag for each header.
304 */
305#define EXT_FRAGMENT	0x1
306#define EXT_HOPOPTS	0x2
307#define EXT_ROUTING	0x4
308#define EXT_AH		0x8
309#define EXT_ESP		0x10
310#define EXT_DSTOPTS	0x20
311#define EXT_RTHDR0		0x40
312#define EXT_RTHDR2		0x80
313
314/*
315 * Template for instructions.
316 *
317 * ipfw_insn is used for all instructions which require no operands,
318 * a single 16-bit value (arg1), or a couple of 8-bit values.
319 *
320 * For other instructions which require different/larger arguments
321 * we have derived structures, ipfw_insn_*.
322 *
323 * The size of the instruction (in 32-bit words) is in the low
324 * 6 bits of "len". The 2 remaining bits are used to implement
325 * NOT and OR on individual instructions. Given a type, you can
326 * compute the length to be put in "len" using F_INSN_SIZE(t)
327 *
328 * F_NOT	negates the match result of the instruction.
329 *
330 * F_OR		is used to build or blocks. By default, instructions
331 *		are evaluated as part of a logical AND. An "or" block
332 *		{ X or Y or Z } contains F_OR set in all but the last
333 *		instruction of the block. A match will cause the code
334 *		to skip past the last instruction of the block.
335 *
336 * NOTA BENE: in a couple of places we assume that
337 *	sizeof(ipfw_insn) == sizeof(u_int32_t)
338 * this needs to be fixed.
339 *
340 */
341typedef struct	_ipfw_insn {	/* template for instructions */
342	_Alignas(_Alignof(u_int32_t)) u_int8_t 	opcode;
343	u_int8_t	len;	/* number of 32-bit words */
344#define	F_NOT		0x80
345#define	F_OR		0x40
346#define	F_LEN_MASK	0x3f
347#define	F_LEN(cmd)	((cmd)->len & F_LEN_MASK)
348
349	u_int16_t	arg1;
350} ipfw_insn;
351
352/*
353 * The F_INSN_SIZE(type) computes the size, in 4-byte words, of
354 * a given type.
355 */
356#define	F_INSN_SIZE(t)	((sizeof (t))/sizeof(u_int32_t))
357
358/*
359 * This is used to store an array of 16-bit entries (ports etc.)
360 */
361typedef struct	_ipfw_insn_u16 {
362	ipfw_insn o;
363	u_int16_t ports[2];	/* there may be more */
364} ipfw_insn_u16;
365
366/*
367 * This is used to store an array of 32-bit entries
368 * (uid, single IPv4 addresses etc.)
369 */
370typedef struct	_ipfw_insn_u32 {
371	ipfw_insn o;
372	u_int32_t d[1];	/* one or more */
373} ipfw_insn_u32;
374
375/*
376 * This is used to store IP addr-mask pairs.
377 */
378typedef struct	_ipfw_insn_ip {
379	ipfw_insn o;
380	struct in_addr	addr;
381	struct in_addr	mask;
382} ipfw_insn_ip;
383
384/*
385 * This is used to forward to a given address (ip).
386 */
387typedef struct  _ipfw_insn_sa {
388	ipfw_insn o;
389	struct sockaddr_in sa;
390} ipfw_insn_sa;
391
392/*
393 * This is used to forward to a given address (ipv6).
394 */
395typedef struct _ipfw_insn_sa6 {
396	ipfw_insn o;
397	struct sockaddr_in6 sa;
398} ipfw_insn_sa6;
399
400/*
401 * This is used for MAC addr-mask pairs.
402 */
403typedef struct	_ipfw_insn_mac {
404	ipfw_insn o;
405	u_char addr[12];	/* dst[6] + src[6] */
406	u_char mask[12];	/* dst[6] + src[6] */
407} ipfw_insn_mac;
408
409/*
410 * This is used for interface match rules (recv xx, xmit xx).
411 */
412typedef struct	_ipfw_insn_if {
413	ipfw_insn o;
414	union {
415		struct in_addr ip;
416		int glob;
417		uint16_t kidx;
418	} p;
419	char name[IFNAMSIZ];
420} ipfw_insn_if;
421
422/*
423 * This is used for storing an altq queue id number.
424 */
425typedef struct _ipfw_insn_altq {
426	ipfw_insn	o;
427	u_int32_t	qid;
428} ipfw_insn_altq;
429
430/*
431 * This is used for limit rules.
432 */
433typedef struct	_ipfw_insn_limit {
434	ipfw_insn o;
435	u_int8_t _pad;
436	u_int8_t limit_mask;	/* combination of DYN_* below	*/
437#define	DYN_SRC_ADDR	0x1
438#define	DYN_SRC_PORT	0x2
439#define	DYN_DST_ADDR	0x4
440#define	DYN_DST_PORT	0x8
441
442	u_int16_t conn_limit;
443} ipfw_insn_limit;
444
445/*
446 * This is used for log instructions.
447 */
448typedef struct  _ipfw_insn_log {
449        ipfw_insn o;
450	u_int32_t max_log;	/* how many do we log -- 0 = all */
451	u_int32_t log_left;	/* how many left to log 	*/
452} ipfw_insn_log;
453
454/* Legacy NAT structures, compat only */
455#ifndef	_KERNEL
456/*
457 * Data structures required by both ipfw(8) and ipfw(4) but not part of the
458 * management API are protected by IPFW_INTERNAL.
459 */
460#ifdef IPFW_INTERNAL
461/* Server pool support (LSNAT). */
462struct cfg_spool {
463	LIST_ENTRY(cfg_spool)   _next;          /* chain of spool instances */
464	struct in_addr          addr;
465	u_short                 port;
466};
467#endif
468
469/* Redirect modes id. */
470#define REDIR_ADDR      0x01
471#define REDIR_PORT      0x02
472#define REDIR_PROTO     0x04
473
474#ifdef IPFW_INTERNAL
475/* Nat redirect configuration. */
476struct cfg_redir {
477	LIST_ENTRY(cfg_redir)   _next;          /* chain of redir instances */
478	u_int16_t               mode;           /* type of redirect mode */
479	struct in_addr	        laddr;          /* local ip address */
480	struct in_addr	        paddr;          /* public ip address */
481	struct in_addr	        raddr;          /* remote ip address */
482	u_short                 lport;          /* local port */
483	u_short                 pport;          /* public port */
484	u_short                 rport;          /* remote port  */
485	u_short                 pport_cnt;      /* number of public ports */
486	u_short                 rport_cnt;      /* number of remote ports */
487	int                     proto;          /* protocol: tcp/udp */
488	struct alias_link       **alink;
489	/* num of entry in spool chain */
490	u_int16_t               spool_cnt;
491	/* chain of spool instances */
492	LIST_HEAD(spool_chain, cfg_spool) spool_chain;
493};
494#endif
495
496#ifdef IPFW_INTERNAL
497/* Nat configuration data struct. */
498struct cfg_nat {
499	/* chain of nat instances */
500	LIST_ENTRY(cfg_nat)     _next;
501	int                     id;                     /* nat id */
502	struct in_addr          ip;                     /* nat ip address */
503	char                    if_name[IF_NAMESIZE];   /* interface name */
504	int                     mode;                   /* aliasing mode */
505	struct libalias	        *lib;                   /* libalias instance */
506	/* number of entry in spool chain */
507	int                     redir_cnt;
508	/* chain of redir instances */
509	LIST_HEAD(redir_chain, cfg_redir) redir_chain;
510};
511#endif
512
513#define SOF_NAT         sizeof(struct cfg_nat)
514#define SOF_REDIR       sizeof(struct cfg_redir)
515#define SOF_SPOOL       sizeof(struct cfg_spool)
516
517#endif	/* ifndef _KERNEL */
518
519struct nat44_cfg_spool {
520	struct in_addr	addr;
521	uint16_t	port;
522	uint16_t	spare;
523};
524#define NAT44_REDIR_ADDR	0x01
525#define NAT44_REDIR_PORT	0x02
526#define NAT44_REDIR_PROTO	0x04
527
528/* Nat redirect configuration. */
529struct nat44_cfg_redir {
530	struct in_addr	laddr;		/* local ip address */
531	struct in_addr	paddr;		/* public ip address */
532	struct in_addr	raddr;		/* remote ip address */
533	uint16_t	lport;		/* local port */
534	uint16_t	pport;		/* public port */
535	uint16_t	rport;		/* remote port  */
536	uint16_t	pport_cnt;	/* number of public ports */
537	uint16_t	rport_cnt;	/* number of remote ports */
538	uint16_t	mode;		/* type of redirect mode */
539	uint16_t	spool_cnt;	/* num of entry in spool chain */
540	uint16_t	spare;
541	uint32_t	proto;		/* protocol: tcp/udp */
542};
543
544/* Nat configuration data struct. */
545struct nat44_cfg_nat {
546	char		name[64];	/* nat name */
547	char		if_name[64];	/* interface name */
548	uint32_t	size;		/* structure size incl. redirs */
549	struct in_addr	ip;		/* nat IPv4 address */
550	uint32_t	mode;		/* aliasing mode */
551	uint32_t	redir_cnt;	/* number of entry in spool chain */
552	u_short		alias_port_lo;	/* low range for port aliasing */
553	u_short		alias_port_hi;	/* high range for port aliasing */
554};
555
556/* Nat command. */
557typedef struct	_ipfw_insn_nat {
558 	ipfw_insn	o;
559 	struct cfg_nat *nat;
560} ipfw_insn_nat;
561
562/* Apply ipv6 mask on ipv6 addr */
563#define APPLY_MASK(addr,mask)	do {					\
564    (addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
565    (addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
566    (addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
567    (addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3]; \
568} while (0)
569
570/* Structure for ipv6 */
571typedef struct _ipfw_insn_ip6 {
572       ipfw_insn o;
573       struct in6_addr addr6;
574       struct in6_addr mask6;
575} ipfw_insn_ip6;
576
577/* Used to support icmp6 types */
578typedef struct _ipfw_insn_icmp6 {
579       ipfw_insn o;
580       uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
581                       *     define ICMP6_MAXTYPE
582                       *     as follows: n = ICMP6_MAXTYPE/32 + 1
583                        *     Actually is 203
584                       */
585} ipfw_insn_icmp6;
586
587/*
588 * Here we have the structure representing an ipfw rule.
589 *
590 * Layout:
591 * struct ip_fw_rule
592 * [ counter block, size = rule->cntr_len ]
593 * [ one or more instructions, size = rule->cmd_len * 4 ]
594 *
595 * It starts with a general area (with link fields).
596 * Counter block may be next (if rule->cntr_len > 0),
597 * followed by an array of one or more instructions, which the code
598 * accesses as an array of 32-bit values. rule->cmd_len represents
599 * the total instructions legth in u32 worrd, while act_ofs represents
600 * rule action offset in u32 words.
601 *
602 * When assembling instruction, remember the following:
603 *
604 *  + if a rule has a "keep-state" (or "limit") option, then the
605 *	first instruction (at r->cmd) MUST BE an O_PROBE_STATE
606 *  + if a rule has a "log" option, then the first action
607 *	(at ACTION_PTR(r)) MUST be O_LOG
608 *  + if a rule has an "altq" option, it comes after "log"
609 *  + if a rule has an O_TAG option, it comes after "log" and "altq"
610 *
611 *
612 * All structures (excluding instructions) are u64-aligned.
613 * Please keep this.
614 */
615
616struct ip_fw_rule {
617	uint16_t	act_ofs;	/* offset of action in 32-bit units */
618	uint16_t	cmd_len;	/* # of 32-bit words in cmd	*/
619	uint16_t	spare;
620	uint8_t		set;		/* rule set (0..31)		*/
621	uint8_t		flags;		/* rule flags			*/
622	uint32_t	rulenum;	/* rule number			*/
623	uint32_t	id;		/* rule id			*/
624
625	ipfw_insn	cmd[1];		/* storage for commands		*/
626};
627#define	IPFW_RULE_NOOPT		0x01	/* Has no options in body	*/
628#define	IPFW_RULE_JUSTOPTS	0x02	/* new format of rule body	*/
629
630/* Unaligned version */
631
632/* Base ipfw rule counter block. */
633struct ip_fw_bcounter {
634	uint16_t	size;		/* Size of counter block, bytes	*/
635	uint8_t		flags;		/* flags for given block	*/
636	uint8_t		spare;
637	uint32_t	timestamp;	/* tv_sec of last match		*/
638	uint64_t	pcnt;		/* Packet counter		*/
639	uint64_t	bcnt;		/* Byte counter			*/
640};
641
642#ifndef	_KERNEL
643/*
644 * Legacy rule format
645 */
646struct ip_fw {
647	struct ip_fw	*x_next;	/* linked list of rules		*/
648	struct ip_fw	*next_rule;	/* ptr to next [skipto] rule	*/
649	/* 'next_rule' is used to pass up 'set_disable' status		*/
650
651	uint16_t	act_ofs;	/* offset of action in 32-bit units */
652	uint16_t	cmd_len;	/* # of 32-bit words in cmd	*/
653	uint16_t	rulenum;	/* rule number			*/
654	uint8_t		set;		/* rule set (0..31)		*/
655	uint8_t		_pad;		/* padding			*/
656	uint32_t	id;		/* rule id */
657
658	/* These fields are present in all rules.			*/
659	uint64_t	pcnt;		/* Packet counter		*/
660	uint64_t	bcnt;		/* Byte counter			*/
661	uint32_t	timestamp;	/* tv_sec of last match		*/
662
663	ipfw_insn	cmd[1];		/* storage for commands		*/
664};
665#endif
666
667#define ACTION_PTR(rule)				\
668	(ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
669
670#define RULESIZE(rule)  (sizeof(*(rule)) + (rule)->cmd_len * 4 - 4)
671
672#if 1 // should be moved to in.h
673/*
674 * This structure is used as a flow mask and a flow id for various
675 * parts of the code.
676 * addr_type is used in userland and kernel to mark the address type.
677 * fib is used in the kernel to record the fib in use.
678 * _flags is used in the kernel to store tcp flags for dynamic rules.
679 */
680struct ipfw_flow_id {
681	uint32_t	dst_ip;
682	uint32_t	src_ip;
683	uint16_t	dst_port;
684	uint16_t	src_port;
685	uint8_t		fib;	/* XXX: must be uint16_t */
686	uint8_t		proto;
687	uint8_t		_flags;	/* protocol-specific flags */
688	uint8_t		addr_type; /* 4=ip4, 6=ip6, 1=ether ? */
689	struct in6_addr dst_ip6;
690	struct in6_addr src_ip6;
691	uint32_t	flow_id6;
692	uint32_t	extra; /* queue/pipe or frag_id */
693};
694#endif
695
696#define	IS_IP4_FLOW_ID(id)	((id)->addr_type == 4)
697#define IS_IP6_FLOW_ID(id)	((id)->addr_type == 6)
698
699/*
700 * Dynamic ipfw rule.
701 */
702typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
703
704struct _ipfw_dyn_rule {
705	ipfw_dyn_rule	*next;		/* linked list of rules.	*/
706	struct ip_fw *rule;		/* pointer to rule		*/
707	/* 'rule' is used to pass up the rule number (from the parent)	*/
708
709	ipfw_dyn_rule *parent;		/* pointer to parent rule	*/
710	u_int64_t	pcnt;		/* packet match counter		*/
711	u_int64_t	bcnt;		/* byte match counter		*/
712	struct ipfw_flow_id id;		/* (masked) flow id		*/
713	u_int32_t	expire;		/* expire time			*/
714	u_int32_t	bucket;		/* which bucket in hash table	*/
715	u_int32_t	state;		/* state of this rule (typically a
716					 * combination of TCP flags)
717					 */
718#define	IPFW_DYN_ORPHANED	0x40000	/* state's parent rule was deleted */
719	u_int32_t	ack_fwd;	/* most recent ACKs in forward	*/
720	u_int32_t	ack_rev;	/* and reverse directions (used	*/
721					/* to generate keepalives)	*/
722	u_int16_t	dyn_type;	/* rule type			*/
723	u_int16_t	count;		/* refcount			*/
724	u_int16_t	kidx;		/* index of named object */
725} __packed __aligned(8);
726
727/*
728 * Definitions for IP option names.
729 */
730#define	IP_FW_IPOPT_LSRR	0x01
731#define	IP_FW_IPOPT_SSRR	0x02
732#define	IP_FW_IPOPT_RR		0x04
733#define	IP_FW_IPOPT_TS		0x08
734
735/*
736 * Definitions for TCP option names.
737 */
738#define	IP_FW_TCPOPT_MSS	0x01
739#define	IP_FW_TCPOPT_WINDOW	0x02
740#define	IP_FW_TCPOPT_SACK	0x04
741#define	IP_FW_TCPOPT_TS		0x08
742#define	IP_FW_TCPOPT_CC		0x10
743
744#define	ICMP_REJECT_RST		0x100	/* fake ICMP code (send a TCP RST) */
745#define	ICMP6_UNREACH_RST	0x100	/* fake ICMPv6 code (send a TCP RST) */
746#define	ICMP_REJECT_ABORT	0x101	/* fake ICMP code (send an SCTP ABORT) */
747#define	ICMP6_UNREACH_ABORT	0x101	/* fake ICMPv6 code (send an SCTP ABORT) */
748
749/*
750 * These are used for lookup tables.
751 */
752
753#define	IPFW_TABLE_ADDR		1	/* Table for holding IPv4/IPv6 prefixes */
754#define	IPFW_TABLE_INTERFACE	2	/* Table for holding interface names */
755#define	IPFW_TABLE_NUMBER	3	/* Table for holding ports/uid/gid/etc */
756#define	IPFW_TABLE_FLOW		4	/* Table for holding flow data */
757#define	IPFW_TABLE_MAXTYPE	4	/* Maximum valid number */
758
759#define	IPFW_TABLE_CIDR	IPFW_TABLE_ADDR	/* compat */
760
761/* Value types */
762#define	IPFW_VTYPE_LEGACY	0xFFFFFFFF	/* All data is filled in */
763#define	IPFW_VTYPE_SKIPTO	0x00000001	/* skipto/call/callreturn */
764#define	IPFW_VTYPE_PIPE		0x00000002	/* pipe/queue */
765#define	IPFW_VTYPE_FIB		0x00000004	/* setfib */
766#define	IPFW_VTYPE_NAT		0x00000008	/* nat */
767#define	IPFW_VTYPE_DSCP		0x00000010	/* dscp */
768#define	IPFW_VTYPE_TAG		0x00000020	/* tag/untag */
769#define	IPFW_VTYPE_DIVERT	0x00000040	/* divert/tee */
770#define	IPFW_VTYPE_NETGRAPH	0x00000080	/* netgraph/ngtee */
771#define	IPFW_VTYPE_LIMIT	0x00000100	/* limit */
772#define	IPFW_VTYPE_NH4		0x00000200	/* IPv4 nexthop */
773#define	IPFW_VTYPE_NH6		0x00000400	/* IPv6 nexthop */
774
775typedef struct	_ipfw_table_entry {
776	in_addr_t	addr;		/* network address		*/
777	u_int32_t	value;		/* value			*/
778	u_int16_t	tbl;		/* table number			*/
779	u_int8_t	masklen;	/* mask length			*/
780} ipfw_table_entry;
781
782typedef struct	_ipfw_table_xentry {
783	uint16_t	len;		/* Total entry length		*/
784	uint8_t		type;		/* entry type			*/
785	uint8_t		masklen;	/* mask length			*/
786	uint16_t	tbl;		/* table number			*/
787	uint16_t	flags;		/* record flags			*/
788	uint32_t	value;		/* value			*/
789	union {
790		/* Longest field needs to be aligned by 4-byte boundary	*/
791		struct in6_addr	addr6;	/* IPv6 address 		*/
792		char	iface[IF_NAMESIZE];	/* interface name	*/
793	} k;
794} ipfw_table_xentry;
795#define	IPFW_TCF_INET	0x01		/* CIDR flags: IPv4 record	*/
796
797typedef struct	_ipfw_table {
798	u_int32_t	size;		/* size of entries in bytes	*/
799	u_int32_t	cnt;		/* # of entries			*/
800	u_int16_t	tbl;		/* table number			*/
801	ipfw_table_entry ent[0];	/* entries			*/
802} ipfw_table;
803
804typedef struct	_ipfw_xtable {
805	ip_fw3_opheader	opheader;	/* IP_FW3 opcode */
806	uint32_t	size;		/* size of entries in bytes	*/
807	uint32_t	cnt;		/* # of entries			*/
808	uint16_t	tbl;		/* table number			*/
809	uint8_t		type;		/* table type			*/
810	ipfw_table_xentry xent[0];	/* entries			*/
811} ipfw_xtable;
812
813typedef struct  _ipfw_obj_tlv {
814	uint16_t        type;		/* TLV type */
815	uint16_t	flags;		/* TLV-specific flags		*/
816	uint32_t        length;		/* Total length, aligned to u64	*/
817} ipfw_obj_tlv;
818#define	IPFW_TLV_TBL_NAME	1
819#define	IPFW_TLV_TBLNAME_LIST	2
820#define	IPFW_TLV_RULE_LIST	3
821#define	IPFW_TLV_DYNSTATE_LIST	4
822#define	IPFW_TLV_TBL_ENT	5
823#define	IPFW_TLV_DYN_ENT	6
824#define	IPFW_TLV_RULE_ENT	7
825#define	IPFW_TLV_TBLENT_LIST	8
826#define	IPFW_TLV_RANGE		9
827#define	IPFW_TLV_EACTION	10
828#define	IPFW_TLV_COUNTERS	11
829#define	IPFW_TLV_OBJDATA	12
830#define	IPFW_TLV_STATE_NAME	14
831
832#define	IPFW_TLV_EACTION_BASE	1000
833#define	IPFW_TLV_EACTION_NAME(arg)	(IPFW_TLV_EACTION_BASE + (arg))
834
835typedef struct _ipfw_obj_data {
836	ipfw_obj_tlv	head;
837	void		*data[0];
838} ipfw_obj_data;
839
840/* Object name TLV */
841typedef struct _ipfw_obj_ntlv {
842	ipfw_obj_tlv	head;		/* TLV header			*/
843	uint16_t	idx;		/* Name index			*/
844	uint8_t		set;		/* set, if applicable		*/
845	uint8_t		type;		/* object type, if applicable	*/
846	uint32_t	spare;		/* unused			*/
847	char		name[64];	/* Null-terminated name		*/
848} ipfw_obj_ntlv;
849
850/* IPv4/IPv6 L4 flow description */
851struct tflow_entry {
852	uint8_t		af;
853	uint8_t		proto;
854	uint16_t	spare;
855	uint16_t	sport;
856	uint16_t	dport;
857	union {
858		struct {
859			struct in_addr	sip;
860			struct in_addr	dip;
861		} a4;
862		struct {
863			struct in6_addr	sip6;
864			struct in6_addr	dip6;
865		} a6;
866	} a;
867};
868
869typedef struct _ipfw_table_value {
870	uint32_t	tag;		/* O_TAG/O_TAGGED */
871	uint32_t	pipe;		/* O_PIPE/O_QUEUE */
872	uint16_t	divert;		/* O_DIVERT/O_TEE */
873	uint16_t	skipto;		/* skipto, CALLRET */
874	uint32_t	netgraph;	/* O_NETGRAPH/O_NGTEE */
875	uint32_t	fib;		/* O_SETFIB */
876	uint32_t	nat;		/* O_NAT */
877	uint32_t	nh4;
878	uint8_t		dscp;
879	uint8_t		spare0;
880	uint16_t	spare1;
881	struct in6_addr	nh6;
882	uint32_t	limit;		/* O_LIMIT */
883	uint32_t	zoneid;		/* scope zone id for nh6 */
884	uint64_t	reserved;
885} ipfw_table_value;
886
887/* Table entry TLV */
888typedef struct	_ipfw_obj_tentry {
889	ipfw_obj_tlv	head;		/* TLV header			*/
890	uint8_t		subtype;	/* subtype (IPv4,IPv6)		*/
891	uint8_t		masklen;	/* mask length			*/
892	uint8_t		result;		/* request result		*/
893	uint8_t		spare0;
894	uint16_t	idx;		/* Table name index		*/
895	uint16_t	spare1;
896	union {
897		/* Longest field needs to be aligned by 8-byte boundary	*/
898		struct in_addr		addr;	/* IPv4 address		*/
899		uint32_t		key;		/* uid/gid/port	*/
900		struct in6_addr		addr6;	/* IPv6 address 	*/
901		char	iface[IF_NAMESIZE];	/* interface name	*/
902		struct tflow_entry	flow;
903	} k;
904	union {
905		ipfw_table_value	value;	/* value data */
906		uint32_t		kidx;	/* value kernel index */
907	} v;
908} ipfw_obj_tentry;
909#define	IPFW_TF_UPDATE	0x01		/* Update record if exists	*/
910/* Container TLV */
911#define	IPFW_CTF_ATOMIC	0x01		/* Perform atomic operation	*/
912/* Operation results */
913#define	IPFW_TR_IGNORED		0	/* Entry was ignored (rollback)	*/
914#define	IPFW_TR_ADDED		1	/* Entry was successfully added	*/
915#define	IPFW_TR_UPDATED		2	/* Entry was successfully updated*/
916#define	IPFW_TR_DELETED		3	/* Entry was successfully deleted*/
917#define	IPFW_TR_LIMIT		4	/* Entry was ignored (limit)	*/
918#define	IPFW_TR_NOTFOUND	5	/* Entry was not found		*/
919#define	IPFW_TR_EXISTS		6	/* Entry already exists		*/
920#define	IPFW_TR_ERROR		7	/* Request has failed (unknown)	*/
921
922typedef struct _ipfw_obj_dyntlv {
923	ipfw_obj_tlv	head;
924	ipfw_dyn_rule	state;
925} ipfw_obj_dyntlv;
926#define	IPFW_DF_LAST	0x01		/* Last state in chain		*/
927
928/* Containter TLVs */
929typedef struct _ipfw_obj_ctlv {
930	ipfw_obj_tlv	head;		/* TLV header			*/
931	uint32_t	count;		/* Number of sub-TLVs		*/
932	uint16_t	objsize;	/* Single object size		*/
933	uint8_t		version;	/* TLV version			*/
934	uint8_t		flags;		/* TLV-specific flags		*/
935} ipfw_obj_ctlv;
936
937/* Range TLV */
938typedef struct _ipfw_range_tlv {
939	ipfw_obj_tlv	head;		/* TLV header			*/
940	uint32_t	flags;		/* Range flags			*/
941	uint16_t	start_rule;	/* Range start			*/
942	uint16_t	end_rule;	/* Range end			*/
943	uint32_t	set;		/* Range set to match		 */
944	uint32_t	new_set;	/* New set to move/swap to	*/
945} ipfw_range_tlv;
946#define	IPFW_RCFLAG_RANGE	0x01	/* rule range is set		*/
947#define	IPFW_RCFLAG_ALL		0x02	/* match ALL rules		*/
948#define	IPFW_RCFLAG_SET		0x04	/* match rules in given set	*/
949#define	IPFW_RCFLAG_DYNAMIC	0x08	/* match only dynamic states	*/
950/* User-settable flags */
951#define	IPFW_RCFLAG_USER	(IPFW_RCFLAG_RANGE | IPFW_RCFLAG_ALL | \
952	IPFW_RCFLAG_SET | IPFW_RCFLAG_DYNAMIC)
953/* Internally used flags */
954#define	IPFW_RCFLAG_DEFAULT	0x0100	/* Do not skip defaul rule	*/
955
956typedef struct _ipfw_ta_tinfo {
957	uint32_t	flags;		/* Format flags			*/
958	uint32_t	spare;
959	uint8_t		taclass4;	/* algorithm class		*/
960	uint8_t		spare4;
961	uint16_t	itemsize4;	/* item size in runtime		*/
962	uint32_t	size4;		/* runtime structure size	*/
963	uint32_t	count4;		/* number of items in runtime	*/
964	uint8_t		taclass6;	/* algorithm class		*/
965	uint8_t		spare6;
966	uint16_t	itemsize6;	/* item size in runtime		*/
967	uint32_t	size6;		/* runtime structure size	*/
968	uint32_t	count6;		/* number of items in runtime	*/
969} ipfw_ta_tinfo;
970#define	IPFW_TACLASS_HASH	1	/* algo is based on hash	*/
971#define	IPFW_TACLASS_ARRAY	2	/* algo is based on array	*/
972#define	IPFW_TACLASS_RADIX	3	/* algo is based on radix tree	*/
973
974#define	IPFW_TATFLAGS_DATA	0x0001		/* Has data filled in	*/
975#define	IPFW_TATFLAGS_AFDATA	0x0002		/* Separate data per AF	*/
976#define	IPFW_TATFLAGS_AFITEM	0x0004		/* diff. items per AF	*/
977
978typedef struct _ipfw_xtable_info {
979	uint8_t		type;		/* table type (addr,iface,..)	*/
980	uint8_t		tflags;		/* type flags			*/
981	uint16_t	mflags;		/* modification flags		*/
982	uint16_t	flags;		/* generic table flags		*/
983	uint16_t	spare[3];
984	uint32_t	vmask;		/* bitmask with value types 	*/
985	uint32_t	set;		/* set table is in		*/
986	uint32_t	kidx;		/* kernel index			*/
987	uint32_t	refcnt;		/* number of references		*/
988	uint32_t	count;		/* Number of records		*/
989	uint32_t	size;		/* Total size of records(export)*/
990	uint32_t	limit;		/* Max number of records	*/
991	char		tablename[64];	/* table name */
992	char		algoname[64];	/* algorithm name		*/
993	ipfw_ta_tinfo	ta_info;	/* additional algo stats	*/
994} ipfw_xtable_info;
995/* Generic table flags */
996#define	IPFW_TGFLAGS_LOCKED	0x01	/* Tables is locked from changes*/
997/* Table type-specific flags */
998#define	IPFW_TFFLAG_SRCIP	0x01
999#define	IPFW_TFFLAG_DSTIP	0x02
1000#define	IPFW_TFFLAG_SRCPORT	0x04
1001#define	IPFW_TFFLAG_DSTPORT	0x08
1002#define	IPFW_TFFLAG_PROTO	0x10
1003/* Table modification flags */
1004#define	IPFW_TMFLAGS_LIMIT	0x0002	/* Change limit value		*/
1005#define	IPFW_TMFLAGS_LOCK	0x0004	/* Change table lock state	*/
1006
1007typedef struct _ipfw_iface_info {
1008	char		ifname[64];	/* interface name		*/
1009	uint32_t	ifindex;	/* interface index		*/
1010	uint32_t	flags;		/* flags			*/
1011	uint32_t	refcnt;		/* number of references		*/
1012	uint32_t	gencnt;		/* number of changes		*/
1013	uint64_t	spare;
1014} ipfw_iface_info;
1015#define	IPFW_IFFLAG_RESOLVED	0x01	/* Interface exists		*/
1016
1017typedef struct _ipfw_ta_info {
1018	char		algoname[64];	/* algorithm name		*/
1019	uint32_t	type;		/* lookup type			*/
1020	uint32_t	flags;
1021	uint32_t	refcnt;
1022	uint32_t	spare0;
1023	uint64_t	spare1;
1024} ipfw_ta_info;
1025
1026typedef struct _ipfw_obj_header {
1027	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1028	uint32_t	spare;
1029	uint16_t	idx;		/* object name index		*/
1030	uint8_t		objtype;	/* object type			*/
1031	uint8_t		objsubtype;	/* object subtype		*/
1032	ipfw_obj_ntlv	ntlv;		/* object name tlv		*/
1033} ipfw_obj_header;
1034
1035typedef struct _ipfw_obj_lheader {
1036	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1037	uint32_t	set_mask;	/* disabled set mask		*/
1038	uint32_t	count;		/* Total objects count		*/
1039	uint32_t	size;		/* Total size (incl. header)	*/
1040	uint32_t	objsize;	/* Size of one object		*/
1041} ipfw_obj_lheader;
1042
1043#define	IPFW_CFG_GET_STATIC	0x01
1044#define	IPFW_CFG_GET_STATES	0x02
1045#define	IPFW_CFG_GET_COUNTERS	0x04
1046typedef struct _ipfw_cfg_lheader {
1047	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1048	uint32_t	set_mask;	/* enabled set mask		*/
1049	uint32_t	spare;
1050	uint32_t	flags;		/* Request flags		*/
1051	uint32_t	size;		/* neded buffer size		*/
1052	uint32_t	start_rule;
1053	uint32_t	end_rule;
1054} ipfw_cfg_lheader;
1055
1056typedef struct _ipfw_range_header {
1057	ip_fw3_opheader	opheader;	/* IP_FW3 opcode		*/
1058	ipfw_range_tlv	range;
1059} ipfw_range_header;
1060
1061typedef struct _ipfw_sopt_info {
1062	uint16_t	opcode;
1063	uint8_t		version;
1064	uint8_t		dir;
1065	uint8_t		spare;
1066	uint64_t	refcnt;
1067} ipfw_sopt_info;
1068
1069#endif /* _IPFW2_H */
1070