1# 2# TPLink TL-WDR4300 - AR9344 based dual-band 2x2 wifi 3# 4# $FreeBSD$ 5# 6 7#NO_UNIVERSE 8 9# Include the default AR934x parameters 10include "std.AR934X" 11 12ident TL-WDR4300 13 14# Override hints with board values 15hints "TL-WDR4300.hints" 16 17# Force the board memory - the base DB120 has 128MB RAM 18options AR71XX_REALMEM=(128*1024*1024) 19 20# i2c GPIO bus 21#device gpioiic 22#device iicbb 23#device iicbus 24#device iic 25 26# Options required for miiproxy and mdiobus 27options ARGE_DEBUG 28options ARGE_MDIO # Export an MDIO bus separate from arge 29device miiproxy # MDIO bus <-> MII PHY rendezvous 30 31device etherswitch 32device arswitch 33 34# read MSDOS formatted disks - USB 35options MSDOSFS 36 37# Enable the uboot environment stuff rather then the 38# redboot stuff. 39options AR71XX_ENV_UBOOT 40 41# uzip - to boot natively from flash 42device xz 43options GEOM_UZIP 44 45# Used for the static uboot partition map 46device geom_map 47 48# Yes, this board has a PCI connected atheros device 49options AR71XX_ATH_EEPROM 50device firmware # Used by the above 51options ATH_EEPROM_FIRMWARE 52 53options ATH_DEBUG_ALQ 54 55# Boot off of the rootfs, as defined in the geom_map setup. 56options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" 57 58# This is required for the 2GHz LNAs on the AR9340 SoC. 59# Without this the 2GHz radio is Quite Deaf. 60device gpio 61device gpioled 62