1# 2# DB120 - the AR9344 SoC reference design 3# 4# $FreeBSD$ 5# 6 7# Include the default AR934x parameters 8include "std.AR934X" 9 10#NO_UNIVERSE 11 12ident DB120 13 14# Override hints with board values 15hints "DB120.hints" 16 17# Force the board memory - the base DB120 has 128MB RAM 18options AR71XX_REALMEM=(128*1024*1024) 19 20# i2c GPIO bus 21#device gpioiic 22#device iicbb 23#device iicbus 24#device iic 25 26# Options required for miiproxy and mdiobus 27options ARGE_MDIO # Export an MDIO bus separate from arge 28device miiproxy # MDIO bus <-> MII PHY rendezvous 29 30device etherswitch 31device arswitch 32 33# read MSDOS formatted disks - USB 34#options MSDOSFS 35 36# Enable the uboot environment stuff rather then the 37# redboot stuff. 38options AR71XX_ENV_UBOOT 39 40# uzip - to boot natively from flash 41device xz 42options GEOM_UZIP 43 44# Used for the static uboot partition map 45device geom_map 46 47# yes, this board has a PCI connected atheros device 48options AR71XX_ATH_EEPROM 49device firmware # Used by the above 50options ATH_EEPROM_FIRMWARE 51 52# Boot off of the rootfs, as defined in the geom_map setup. 53options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" 54