1# 2# AP143 - the AP143 reference board from Qualcomm Atheros includes: 3# 4# * AR9330 SoC 5# * 32MB RAM 6# * 4MB flash 7# * Integrated 1x1 2GHz wifi and 10/100 bridge 8# 9# $FreeBSD$ 10# 11 12#NO_UNIVERSE 13 14# Include the default QCA953x parameters 15include "QCA953X_BASE" 16 17ident AP143 18 19# Override hints with board values 20hints "AP143.hints" 21 22# Force the board memory - the base AP121 only has 16MB RAM 23options AR71XX_REALMEM=(32*1024*1024) 24 25# i2c GPIO bus 26#device gpioiic 27#device iicbb 28#device iicbus 29#device iic 30 31# Options required for miiproxy and mdiobus 32options ARGE_MDIO # Export an MDIO bus separate from arge 33device miiproxy # MDIO bus <-> MII PHY rendezvous 34 35device etherswitch 36device arswitch 37 38# read MSDOS formatted disks - USB 39#options MSDOSFS 40 41# Enable the uboot environment stuff rather then the 42# redboot stuff. 43options AR71XX_ENV_UBOOT 44 45# uzip - to boot natively from flash 46device xz 47options GEOM_UZIP 48 49# Used for the static uboot partition map 50device geom_map 51 52# Boot off of the rootfs, as defined in the geom_map setup. 53options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" 54