1/*- 2 * Copyright (c) 2017 Broadcom. All rights reserved. 3 * The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright notice, 9 * this list of conditions and the following disclaimer. 10 * 11 * 2. Redistributions in binary form must reproduce the above copyright notice, 12 * this list of conditions and the following disclaimer in the documentation 13 * and/or other materials provided with the distribution. 14 * 15 * 3. Neither the name of the copyright holder nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 * 31 * $FreeBSD$ 32 */ 33 34/** 35 * @defgroup sli SLI-4 Base APIs 36 */ 37 38/** 39 * @file 40 * All common (i.e. transport-independent) SLI-4 functions are implemented 41 * in this file. 42 */ 43 44#include "sli4.h" 45 46#if defined(OCS_INCLUDE_DEBUG) 47#include "ocs_utils.h" 48#endif 49 50#define SLI4_BMBX_DELAY_US 1000 /* 1 ms */ 51#define SLI4_INIT_PORT_DELAY_US 10000 /* 10 ms */ 52 53static int32_t sli_fw_init(sli4_t *); 54static int32_t sli_fw_term(sli4_t *); 55static int32_t sli_sliport_control(sli4_t *sli4, uint32_t endian); 56static int32_t sli_cmd_fw_deinitialize(sli4_t *, void *, size_t); 57static int32_t sli_cmd_fw_initialize(sli4_t *, void *, size_t); 58static int32_t sli_queue_doorbell(sli4_t *, sli4_queue_t *); 59static uint8_t sli_queue_entry_is_valid(sli4_queue_t *, uint8_t *, uint8_t); 60 61const uint8_t sli4_fw_initialize[] = { 62 0xff, 0x12, 0x34, 0xff, 63 0xff, 0x56, 0x78, 0xff, 64}; 65 66const uint8_t sli4_fw_deinitialize[] = { 67 0xff, 0xaa, 0xbb, 0xff, 68 0xff, 0xcc, 0xdd, 0xff, 69}; 70 71typedef struct { 72 uint32_t rev_id; 73 uint32_t family; /* generation */ 74 sli4_asic_type_e type; 75 sli4_asic_rev_e rev; 76} sli4_asic_entry_t; 77 78sli4_asic_entry_t sli4_asic_table[] = { 79 { 0x00, 1, SLI4_ASIC_TYPE_BE3, SLI4_ASIC_REV_A0}, 80 { 0x01, 1, SLI4_ASIC_TYPE_BE3, SLI4_ASIC_REV_A1}, 81 { 0x02, 1, SLI4_ASIC_TYPE_BE3, SLI4_ASIC_REV_A2}, 82 { 0x00, 4, SLI4_ASIC_TYPE_SKYHAWK, SLI4_ASIC_REV_A0}, 83 { 0x00, 2, SLI4_ASIC_TYPE_SKYHAWK, SLI4_ASIC_REV_A0}, 84 { 0x10, 1, SLI4_ASIC_TYPE_BE3, SLI4_ASIC_REV_B0}, 85 { 0x10, 0x04, SLI4_ASIC_TYPE_SKYHAWK, SLI4_ASIC_REV_B0}, 86 { 0x11, 0x04, SLI4_ASIC_TYPE_SKYHAWK, SLI4_ASIC_REV_B1}, 87 { 0x0, 0x0a, SLI4_ASIC_TYPE_LANCER, SLI4_ASIC_REV_A0}, 88 { 0x10, 0x0b, SLI4_ASIC_TYPE_LANCER, SLI4_ASIC_REV_B0}, 89 { 0x30, 0x0b, SLI4_ASIC_TYPE_LANCER, SLI4_ASIC_REV_D0}, 90 { 0x3, 0x0b, SLI4_ASIC_TYPE_LANCERG6,SLI4_ASIC_REV_A3}, 91 { 0x0, 0x0c, SLI4_ASIC_TYPE_LANCERG6,SLI4_ASIC_REV_A0}, 92 { 0x1, 0x0c, SLI4_ASIC_TYPE_LANCERG6,SLI4_ASIC_REV_A1}, 93 { 0x3, 0x0c, SLI4_ASIC_TYPE_LANCERG6,SLI4_ASIC_REV_A3}, 94 95 { 0x00, 0x05, SLI4_ASIC_TYPE_CORSAIR, SLI4_ASIC_REV_A0}, 96}; 97 98/* 99 * @brief Convert queue type enum (SLI_QTYPE_*) into a string. 100 */ 101const char *SLI_QNAME[] = { 102 "Event Queue", 103 "Completion Queue", 104 "Mailbox Queue", 105 "Work Queue", 106 "Receive Queue", 107 "Undefined" 108}; 109 110/** 111 * @brief Define the mapping of registers to their BAR and offset. 112 * 113 * @par Description 114 * Although SLI-4 specification defines a common set of registers, their locations 115 * (both BAR and offset) depend on the interface type. This array maps a register 116 * enum to an array of BAR/offset pairs indexed by the interface type. For 117 * example, to access the bootstrap mailbox register on an interface type 0 118 * device, code can refer to the offset using regmap[SLI4_REG_BMBX][0].offset. 119 * 120 * @b Note: A value of UINT32_MAX for either the register set (rset) or offset (off) 121 * indicates an invalid mapping. 122 */ 123const sli4_reg_t regmap[SLI4_REG_MAX][SLI4_MAX_IF_TYPES] = { 124 /* SLI4_REG_BMBX */ 125 { 126 { 2, SLI4_BMBX_REG }, { 0, SLI4_BMBX_REG }, { 0, SLI4_BMBX_REG }, { 0, SLI4_BMBX_REG }, 127 }, 128 /* SLI4_REG_EQCQ_DOORBELL */ 129 { 130 { 2, SLI4_EQCQ_DOORBELL_REG }, { 0, SLI4_EQCQ_DOORBELL_REG }, 131 { 0, SLI4_EQCQ_DOORBELL_REG }, { 0, SLI4_EQCQ_DOORBELL_REG }, 132 }, 133 /* SLI4_REG_FCOE_RQ_DOORBELL */ 134 { 135 { 2, SLI4_RQ_DOORBELL_REG }, { 0, SLI4_RQ_DOORBELL_REG }, 136 { 0, SLI4_RQ_DOORBELL_REG }, { UINT32_MAX, UINT32_MAX }, 137 }, 138 /* SLI4_REG_IO_WQ_DOORBELL */ 139 { 140 { 2, SLI4_IO_WQ_DOORBELL_REG }, { 0, SLI4_IO_WQ_DOORBELL_REG }, { 0, SLI4_IO_WQ_DOORBELL_REG }, { UINT32_MAX, UINT32_MAX }, 141 }, 142 /* SLI4_REG_MQ_DOORBELL */ 143 { 144 { 2, SLI4_MQ_DOORBELL_REG }, { 0, SLI4_MQ_DOORBELL_REG }, 145 { 0, SLI4_MQ_DOORBELL_REG }, { 0, SLI4_MQ_DOORBELL_REG }, 146 }, 147 /* SLI4_REG_PHYSDEV_CONTROL */ 148 { 149 { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { 0, SLI4_PHSDEV_CONTROL_REG_23 }, { 0, SLI4_PHSDEV_CONTROL_REG_23 }, 150 }, 151 /* SLI4_REG_SLIPORT_CONTROL */ 152 { 153 { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { 0, SLI4_SLIPORT_CONTROL_REG }, { UINT32_MAX, UINT32_MAX }, 154 }, 155 /* SLI4_REG_SLIPORT_ERROR1 */ 156 { 157 { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { 0, SLI4_SLIPORT_ERROR1 }, { UINT32_MAX, UINT32_MAX }, 158 }, 159 /* SLI4_REG_SLIPORT_ERROR2 */ 160 { 161 { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { 0, SLI4_SLIPORT_ERROR2 }, { UINT32_MAX, UINT32_MAX }, 162 }, 163 /* SLI4_REG_SLIPORT_SEMAPHORE */ 164 { 165 { 1, SLI4_PORT_SEMAPHORE_REG_0 }, { 0, SLI4_PORT_SEMAPHORE_REG_1 }, 166 { 0, SLI4_PORT_SEMAPHORE_REG_23 }, { 0, SLI4_PORT_SEMAPHORE_REG_23 }, 167 }, 168 /* SLI4_REG_SLIPORT_STATUS */ 169 { 170 { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { 0, SLI4_PORT_STATUS_REG_23 }, { 0, SLI4_PORT_STATUS_REG_23 }, 171 }, 172 /* SLI4_REG_UERR_MASK_HI */ 173 { 174 { 0, SLI4_UERR_MASK_HIGH_REG }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, 175 }, 176 /* SLI4_REG_UERR_MASK_LO */ 177 { 178 { 0, SLI4_UERR_MASK_LOW_REG }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, 179 }, 180 /* SLI4_REG_UERR_STATUS_HI */ 181 { 182 { 0, SLI4_UERR_STATUS_HIGH_REG }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, 183 }, 184 /* SLI4_REG_UERR_STATUS_LO */ 185 { 186 { 0, SLI4_UERR_STATUS_LOW_REG }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, 187 }, 188 /* SLI4_REG_SW_UE_CSR1 */ 189 { 190 { 1, SLI4_SW_UE_CSR1}, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, 191 }, 192 /* SLI4_REG_SW_UE_CSR2 */ 193 { 194 { 1, SLI4_SW_UE_CSR2}, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, { UINT32_MAX, UINT32_MAX }, 195 }, 196}; 197 198/** 199 * @brief Read the given SLI register. 200 * 201 * @param sli Pointer to the SLI context. 202 * @param reg Register name enum. 203 * 204 * @return Returns the register value. 205 */ 206uint32_t 207sli_reg_read(sli4_t *sli, sli4_regname_e reg) 208{ 209 const sli4_reg_t *r = &(regmap[reg][sli->if_type]); 210 211 if ((UINT32_MAX == r->rset) || (UINT32_MAX == r->off)) { 212 ocs_log_err(sli->os, "regname %d not defined for if_type %d\n", reg, sli->if_type); 213 return UINT32_MAX; 214 } 215 216 return ocs_reg_read32(sli->os, r->rset, r->off); 217} 218 219/** 220 * @brief Write the value to the given SLI register. 221 * 222 * @param sli Pointer to the SLI context. 223 * @param reg Register name enum. 224 * @param val Value to write. 225 * 226 * @return None. 227 */ 228void 229sli_reg_write(sli4_t *sli, sli4_regname_e reg, uint32_t val) 230{ 231 const sli4_reg_t *r = &(regmap[reg][sli->if_type]); 232 233 if ((UINT32_MAX == r->rset) || (UINT32_MAX == r->off)) { 234 ocs_log_err(sli->os, "regname %d not defined for if_type %d\n", reg, sli->if_type); 235 return; 236 } 237 238 ocs_reg_write32(sli->os, r->rset, r->off, val); 239} 240 241/** 242 * @brief Check if the SLI_INTF register is valid. 243 * 244 * @param val 32-bit SLI_INTF register value. 245 * 246 * @return Returns 0 on success, or a non-zero value on failure. 247 */ 248static uint8_t 249sli_intf_valid_check(uint32_t val) 250{ 251 return ((val >> SLI4_INTF_VALID_SHIFT) & SLI4_INTF_VALID_MASK) != SLI4_INTF_VALID; 252} 253 254/** 255 * @brief Retrieve the SLI revision level. 256 * 257 * @param val 32-bit SLI_INTF register value. 258 * 259 * @return Returns the SLI revision level. 260 */ 261static uint8_t 262sli_intf_sli_revision(uint32_t val) 263{ 264 return ((val >> SLI4_INTF_SLI_REVISION_SHIFT) & SLI4_INTF_SLI_REVISION_MASK); 265} 266 267static uint8_t 268sli_intf_sli_family(uint32_t val) 269{ 270 return ((val >> SLI4_INTF_SLI_FAMILY_SHIFT) & SLI4_INTF_SLI_FAMILY_MASK); 271} 272 273/** 274 * @brief Retrieve the SLI interface type. 275 * 276 * @param val 32-bit SLI_INTF register value. 277 * 278 * @return Returns the SLI interface type. 279 */ 280static uint8_t 281sli_intf_if_type(uint32_t val) 282{ 283 return ((val >> SLI4_INTF_IF_TYPE_SHIFT) & SLI4_INTF_IF_TYPE_MASK); 284} 285 286/** 287 * @brief Retrieve PCI revision ID. 288 * 289 * @param val 32-bit PCI CLASS_REVISION register value. 290 * 291 * @return Returns the PCI revision ID. 292 */ 293static uint8_t 294sli_pci_rev_id(uint32_t val) 295{ 296 return ((val >> SLI4_PCI_REV_ID_SHIFT) & SLI4_PCI_REV_ID_MASK); 297} 298 299/** 300 * @brief retrieve SLI ASIC generation 301 * 302 * @param val 32-bit SLI_ASIC_ID register value 303 * 304 * @return SLI ASIC generation 305 */ 306static uint8_t 307sli_asic_gen(uint32_t val) 308{ 309 return ((val >> SLI4_ASIC_GEN_SHIFT) & SLI4_ASIC_GEN_MASK); 310} 311 312/** 313 * @brief Wait for the bootstrap mailbox to report "ready". 314 * 315 * @param sli4 SLI context pointer. 316 * @param msec Number of milliseconds to wait. 317 * 318 * @return Returns 0 if BMBX is ready, or non-zero otherwise (i.e. time out occurred). 319 */ 320static int32_t 321sli_bmbx_wait(sli4_t *sli4, uint32_t msec) 322{ 323 uint32_t val = 0; 324 325 do { 326 ocs_udelay(SLI4_BMBX_DELAY_US); 327 val = sli_reg_read(sli4, SLI4_REG_BMBX); 328 msec--; 329 } while(msec && !(val & SLI4_BMBX_RDY)); 330 331 return(!(val & SLI4_BMBX_RDY)); 332} 333 334/** 335 * @brief Write bootstrap mailbox. 336 * 337 * @param sli4 SLI context pointer. 338 * 339 * @return Returns 0 if command succeeded, or non-zero otherwise. 340 */ 341static int32_t 342sli_bmbx_write(sli4_t *sli4) 343{ 344 uint32_t val = 0; 345 346 /* write buffer location to bootstrap mailbox register */ 347 ocs_dma_sync(&sli4->bmbx, OCS_DMASYNC_PREWRITE); 348 val = SLI4_BMBX_WRITE_HI(sli4->bmbx.phys); 349 sli_reg_write(sli4, SLI4_REG_BMBX, val); 350 351 if (sli_bmbx_wait(sli4, SLI4_BMBX_DELAY_US)) { 352 ocs_log_crit(sli4->os, "BMBX WRITE_HI failed\n"); 353 return -1; 354 } 355 val = SLI4_BMBX_WRITE_LO(sli4->bmbx.phys); 356 sli_reg_write(sli4, SLI4_REG_BMBX, val); 357 358 /* wait for SLI Port to set ready bit */ 359 return sli_bmbx_wait(sli4, SLI4_BMBX_TIMEOUT_MSEC/*XXX*/); 360} 361 362#if defined(OCS_INCLUDE_DEBUG) 363/** 364 * @ingroup sli 365 * @brief Dump BMBX mailbox command. 366 * 367 * @par Description 368 * Convenience function for dumping BMBX mailbox commands. Takes 369 * into account which mailbox command is given since SLI_CONFIG 370 * commands are special. 371 * 372 * @b Note: This function takes advantage of 373 * the one-command-at-a-time nature of the BMBX to be able to 374 * display non-embedded SLI_CONFIG commands. This will not work 375 * for mailbox commands on the MQ. Luckily, all current non-emb 376 * mailbox commands go through the BMBX. 377 * 378 * @param sli4 SLI context pointer. 379 * @param mbx Pointer to mailbox command to dump. 380 * @param prefix Prefix for dump label. 381 * 382 * @return None. 383 */ 384static void 385sli_dump_bmbx_command(sli4_t *sli4, void *mbx, const char *prefix) 386{ 387 uint32_t size = 0; 388 char label[64]; 389 uint32_t i; 390 /* Mailbox diagnostic logging */ 391 sli4_mbox_command_header_t *hdr = (sli4_mbox_command_header_t *)mbx; 392 393 if (!ocs_debug_is_enabled(OCS_DEBUG_ENABLE_MQ_DUMP)) { 394 return; 395 } 396 397 if (hdr->command == SLI4_MBOX_COMMAND_SLI_CONFIG) { 398 sli4_cmd_sli_config_t *sli_config = (sli4_cmd_sli_config_t *)hdr; 399 sli4_req_hdr_t *sli_config_hdr; 400 if (sli_config->emb) { 401 ocs_snprintf(label, sizeof(label), "%s (emb)", prefix); 402 403 /* if embedded, dump entire command */ 404 sli_config_hdr = (sli4_req_hdr_t *)sli_config->payload.embed; 405 size = sizeof(*sli_config) - sizeof(sli_config->payload) + 406 sli_config_hdr->request_length + (4*sizeof(uint32_t)); 407 ocs_dump32(OCS_DEBUG_ENABLE_MQ_DUMP, sli4->os, label, 408 (uint8_t *)sli4->bmbx.virt, size); 409 } else { 410 sli4_sli_config_pmd_t *pmd; 411 ocs_snprintf(label, sizeof(label), "%s (non-emb hdr)", prefix); 412 413 /* if non-embedded, break up into two parts: SLI_CONFIG hdr 414 and the payload(s) */ 415 size = sizeof(*sli_config) - sizeof(sli_config->payload) + (12 * sli_config->pmd_count); 416 ocs_dump32(OCS_DEBUG_ENABLE_MQ_DUMP, sli4->os, label, 417 (uint8_t *)sli4->bmbx.virt, size); 418 419 /* as sanity check, make sure first PMD matches what was saved */ 420 pmd = &sli_config->payload.mem; 421 if ((pmd->address_high == ocs_addr32_hi(sli4->bmbx_non_emb_pmd->phys)) && 422 (pmd->address_low == ocs_addr32_lo(sli4->bmbx_non_emb_pmd->phys))) { 423 for (i = 0; i < sli_config->pmd_count; i++, pmd++) { 424 sli_config_hdr = sli4->bmbx_non_emb_pmd->virt; 425 ocs_snprintf(label, sizeof(label), "%s (non-emb pay[%d])", 426 prefix, i); 427 ocs_dump32(OCS_DEBUG_ENABLE_MQ_DUMP, sli4->os, label, 428 (uint8_t *)sli4->bmbx_non_emb_pmd->virt, 429 sli_config_hdr->request_length + (4*sizeof(uint32_t))); 430 } 431 } else { 432 ocs_log_debug(sli4->os, "pmd addr does not match pmd:%x %x (%x %x)\n", 433 pmd->address_high, pmd->address_low, 434 ocs_addr32_hi(sli4->bmbx_non_emb_pmd->phys), 435 ocs_addr32_lo(sli4->bmbx_non_emb_pmd->phys)); 436 } 437 } 438 } else { 439 /* not an SLI_CONFIG command, just display first 64 bytes, like we do 440 for MQEs */ 441 size = 64; 442 ocs_dump32(OCS_DEBUG_ENABLE_MQ_DUMP, sli4->os, prefix, 443 (uint8_t *)mbx, size); 444 } 445} 446#endif 447 448/** 449 * @ingroup sli 450 * @brief Submit a command to the bootstrap mailbox and check the status. 451 * 452 * @param sli4 SLI context pointer. 453 * 454 * @return Returns 0 on success, or a non-zero value on failure. 455 */ 456int32_t 457sli_bmbx_command(sli4_t *sli4) 458{ 459 void *cqe = (uint8_t *)sli4->bmbx.virt + SLI4_BMBX_SIZE; 460 461#if defined(OCS_INCLUDE_DEBUG) 462 sli_dump_bmbx_command(sli4, sli4->bmbx.virt, "bmbx cmd"); 463#endif 464 465 if (sli_fw_error_status(sli4) > 0) { 466 ocs_log_crit(sli4->os, "Chip is in an error state - Mailbox " 467 "command rejected status=%#x error1=%#x error2=%#x\n", 468 sli_reg_read(sli4, SLI4_REG_SLIPORT_STATUS), 469 sli_reg_read(sli4, SLI4_REG_SLIPORT_ERROR1), 470 sli_reg_read(sli4, SLI4_REG_SLIPORT_ERROR2)); 471 return -1; 472 } 473 474 if (sli_bmbx_write(sli4)) { 475 ocs_log_crit(sli4->os, "bootstrap mailbox write fail phys=%p reg=%#x\n", 476 (void*)sli4->bmbx.phys, 477 sli_reg_read(sli4, SLI4_REG_BMBX)); 478 return -1; 479 } 480 481 /* check completion queue entry status */ 482 ocs_dma_sync(&sli4->bmbx, OCS_DMASYNC_POSTREAD); 483 if (((sli4_mcqe_t *)cqe)->val) { 484#if defined(OCS_INCLUDE_DEBUG) 485 sli_dump_bmbx_command(sli4, sli4->bmbx.virt, "bmbx cmpl"); 486 ocs_dump32(OCS_DEBUG_ENABLE_CQ_DUMP, sli4->os, "bmbx cqe", cqe, sizeof(sli4_mcqe_t)); 487#endif 488 return sli_cqe_mq(cqe); 489 } else { 490 ocs_log_err(sli4->os, "invalid or wrong type\n"); 491 return -1; 492 } 493} 494 495/**************************************************************************** 496 * Messages 497 */ 498 499/** 500 * @ingroup sli 501 * @brief Write a CONFIG_LINK command to the provided buffer. 502 * 503 * @param sli4 SLI context pointer. 504 * @param buf Virtual pointer to the destination buffer. 505 * @param size Buffer size, in bytes. 506 * 507 * @return Returns the number of bytes written. 508 */ 509int32_t 510sli_cmd_config_link(sli4_t *sli4, void *buf, size_t size) 511{ 512 sli4_cmd_config_link_t *config_link = buf; 513 514 ocs_memset(buf, 0, size); 515 516 config_link->hdr.command = SLI4_MBOX_COMMAND_CONFIG_LINK; 517 518 /* Port interprets zero in a field as "use default value" */ 519 520 return sizeof(sli4_cmd_config_link_t); 521} 522 523/** 524 * @ingroup sli 525 * @brief Write a DOWN_LINK command to the provided buffer. 526 * 527 * @param sli4 SLI context pointer. 528 * @param buf Virtual pointer to the destination buffer. 529 * @param size Buffer size, in bytes. 530 * 531 * @return Returns the number of bytes written. 532 */ 533int32_t 534sli_cmd_down_link(sli4_t *sli4, void *buf, size_t size) 535{ 536 sli4_mbox_command_header_t *hdr = buf; 537 538 ocs_memset(buf, 0, size); 539 540 hdr->command = SLI4_MBOX_COMMAND_DOWN_LINK; 541 542 /* Port interprets zero in a field as "use default value" */ 543 544 return sizeof(sli4_mbox_command_header_t); 545} 546 547/** 548 * @ingroup sli 549 * @brief Write a DUMP Type 4 command to the provided buffer. 550 * 551 * @param sli4 SLI context pointer. 552 * @param buf Virtual pointer to the destination buffer. 553 * @param size Buffer size, in bytes. 554 * @param wki The well known item ID. 555 * 556 * @return Returns the number of bytes written. 557 */ 558int32_t 559sli_cmd_dump_type4(sli4_t *sli4, void *buf, size_t size, uint16_t wki) 560{ 561 sli4_cmd_dump4_t *cmd = buf; 562 563 ocs_memset(buf, 0, size); 564 565 cmd->hdr.command = SLI4_MBOX_COMMAND_DUMP; 566 cmd->type = 4; 567 cmd->wki_selection = wki; 568 return sizeof(sli4_cmd_dump4_t); 569} 570 571/** 572 * @ingroup sli 573 * @brief Write a COMMON_READ_TRANSCEIVER_DATA command. 574 * 575 * @param sli4 SLI context. 576 * @param buf Destination buffer for the command. 577 * @param size Buffer size, in bytes. 578 * @param page_num The page of SFP data to retrieve (0xa0 or 0xa2). 579 * @param dma DMA structure from which the data will be copied. 580 * 581 * @note This creates a Version 0 message. 582 * 583 * @return Returns the number of bytes written. 584 */ 585int32_t 586sli_cmd_common_read_transceiver_data(sli4_t *sli4, void *buf, size_t size, uint32_t page_num, 587 ocs_dma_t *dma) 588{ 589 sli4_req_common_read_transceiver_data_t *req = NULL; 590 uint32_t sli_config_off = 0; 591 uint32_t payload_size; 592 593 if (dma == NULL) { 594 /* Payload length must accommodate both request and response */ 595 payload_size = max(sizeof(sli4_req_common_read_transceiver_data_t), 596 sizeof(sli4_res_common_read_transceiver_data_t)); 597 } else { 598 payload_size = dma->size; 599 } 600 601 if (sli4->port_type == SLI4_PORT_TYPE_FC) { 602 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, dma); 603 } 604 605 if (dma == NULL) { 606 req = (sli4_req_common_read_transceiver_data_t *)((uint8_t *)buf + sli_config_off); 607 } else { 608 req = (sli4_req_common_read_transceiver_data_t *)dma->virt; 609 ocs_memset(req, 0, dma->size); 610 } 611 612 req->hdr.opcode = SLI4_OPC_COMMON_READ_TRANSCEIVER_DATA; 613 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 614 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 615 616 req->page_number = page_num; 617 req->port = sli4->physical_port; 618 619 return(sli_config_off + sizeof(sli4_req_common_read_transceiver_data_t)); 620} 621 622/** 623 * @ingroup sli 624 * @brief Write a READ_LINK_STAT command to the provided buffer. 625 * 626 * @param sli4 SLI context pointer. 627 * @param buf Virtual pointer to the destination buffer. 628 * @param size Buffer size, in bytes. 629 * @param req_ext_counters If TRUE, then the extended counters will be requested. 630 * @param clear_overflow_flags If TRUE, then overflow flags will be cleared. 631 * @param clear_all_counters If TRUE, the counters will be cleared. 632 * 633 * @return Returns the number of bytes written. 634 */ 635int32_t 636sli_cmd_read_link_stats(sli4_t *sli4, void *buf, size_t size, 637 uint8_t req_ext_counters, 638 uint8_t clear_overflow_flags, 639 uint8_t clear_all_counters) 640{ 641 sli4_cmd_read_link_stats_t *cmd = buf; 642 643 ocs_memset(buf, 0, size); 644 645 cmd->hdr.command = SLI4_MBOX_COMMAND_READ_LNK_STAT; 646 cmd->rec = req_ext_counters; 647 cmd->clrc = clear_all_counters; 648 cmd->clof = clear_overflow_flags; 649 return sizeof(sli4_cmd_read_link_stats_t); 650} 651 652/** 653 * @ingroup sli 654 * @brief Write a READ_STATUS command to the provided buffer. 655 * 656 * @param sli4 SLI context pointer. 657 * @param buf Virtual pointer to the destination buffer. 658 * @param size Buffer size, in bytes. 659 * @param clear_counters If TRUE, the counters will be cleared. 660 * 661 * @return Returns the number of bytes written. 662 */ 663int32_t 664sli_cmd_read_status(sli4_t *sli4, void *buf, size_t size, 665 uint8_t clear_counters) 666{ 667 sli4_cmd_read_status_t *cmd = buf; 668 669 ocs_memset(buf, 0, size); 670 671 cmd->hdr.command = SLI4_MBOX_COMMAND_READ_STATUS; 672 cmd->cc = clear_counters; 673 return sizeof(sli4_cmd_read_status_t); 674} 675 676/** 677 * @brief Write a FW_DEINITIALIZE command to the provided buffer. 678 * 679 * @param sli4 SLI context pointer. 680 * @param buf Virtual pointer to the destination buffer. 681 * @param size Buffer size, in bytes. 682 * 683 * @return Returns the number of bytes written. 684 */ 685static int32_t 686sli_cmd_fw_deinitialize(sli4_t *sli4, void *buf, size_t size) 687{ 688 689 ocs_memset(buf, 0, size); 690 ocs_memcpy(buf, sli4_fw_deinitialize, sizeof(sli4_fw_deinitialize)); 691 692 return sizeof(sli4_fw_deinitialize); 693} 694 695/** 696 * @brief Write a FW_INITIALIZE command to the provided buffer. 697 * 698 * @param sli4 SLI context pointer. 699 * @param buf Virtual pointer to the destination buffer. 700 * @param size Buffer size, in bytes. 701 * 702 * @return Returns the number of bytes written. 703 */ 704static int32_t 705sli_cmd_fw_initialize(sli4_t *sli4, void *buf, size_t size) 706{ 707 708 ocs_memset(buf, 0, size); 709 ocs_memcpy(buf, sli4_fw_initialize, sizeof(sli4_fw_initialize)); 710 711 return sizeof(sli4_fw_initialize); 712} 713 714/** 715 * @ingroup sli 716 * @brief Write an INIT_LINK command to the provided buffer. 717 * 718 * @param sli4 SLI context pointer. 719 * @param buf Virtual pointer to the destination buffer. 720 * @param size Buffer size, in bytes. 721 * @param speed Link speed. 722 * @param reset_alpa For native FC, this is the selective reset AL_PA 723 * 724 * @return Returns the number of bytes written. 725 */ 726int32_t 727sli_cmd_init_link(sli4_t *sli4, void *buf, size_t size, uint32_t speed, uint8_t reset_alpa) 728{ 729 sli4_cmd_init_link_t *init_link = buf; 730 731 ocs_memset(buf, 0, size); 732 733 init_link->hdr.command = SLI4_MBOX_COMMAND_INIT_LINK; 734 735 /* Most fields only have meaning for FC links */ 736 if (sli4->config.topology != SLI4_READ_CFG_TOPO_FCOE) { 737 init_link->selective_reset_al_pa = reset_alpa; 738 init_link->link_flags.loopback = FALSE; 739 740 init_link->link_speed_selection_code = speed; 741 switch (speed) { 742 case FC_LINK_SPEED_1G: 743 case FC_LINK_SPEED_2G: 744 case FC_LINK_SPEED_4G: 745 case FC_LINK_SPEED_8G: 746 case FC_LINK_SPEED_16G: 747 case FC_LINK_SPEED_32G: 748 init_link->link_flags.fixed_speed = TRUE; 749 break; 750 case FC_LINK_SPEED_10G: 751 ocs_log_test(sli4->os, "unsupported FC speed %d\n", speed); 752 return 0; 753 } 754 755 switch (sli4->config.topology) { 756 case SLI4_READ_CFG_TOPO_FC: 757 /* Attempt P2P but failover to FC-AL */ 758 init_link->link_flags.enable_topology_failover = TRUE; 759 760 if (sli_get_asic_type(sli4) == SLI4_ASIC_TYPE_LANCER) 761 init_link->link_flags.topology = SLI4_INIT_LINK_F_FCAL_FAIL_OVER; 762 else 763 init_link->link_flags.topology = SLI4_INIT_LINK_F_P2P_FAIL_OVER; 764 765 break; 766 case SLI4_READ_CFG_TOPO_FC_AL: 767 init_link->link_flags.topology = SLI4_INIT_LINK_F_FCAL_ONLY; 768 if ((init_link->link_speed_selection_code == FC_LINK_SPEED_16G) || 769 (init_link->link_speed_selection_code == FC_LINK_SPEED_32G)) { 770 ocs_log_test(sli4->os, "unsupported FC-AL speed %d\n", speed); 771 return 0; 772 } 773 break; 774 case SLI4_READ_CFG_TOPO_FC_DA: 775 init_link->link_flags.topology = FC_TOPOLOGY_P2P; 776 break; 777 default: 778 ocs_log_test(sli4->os, "unsupported topology %#x\n", sli4->config.topology); 779 return 0; 780 } 781 782 init_link->link_flags.unfair = FALSE; 783 init_link->link_flags.skip_lirp_lilp = FALSE; 784 init_link->link_flags.gen_loop_validity_check = FALSE; 785 init_link->link_flags.skip_lisa = FALSE; 786 init_link->link_flags.select_hightest_al_pa = FALSE; 787 } 788 789 return sizeof(sli4_cmd_init_link_t); 790} 791 792/** 793 * @ingroup sli 794 * @brief Write an INIT_VFI command to the provided buffer. 795 * 796 * @param sli4 SLI context pointer. 797 * @param buf Virtual pointer to the destination buffer. 798 * @param size Buffer size, in bytes. 799 * @param vfi VFI 800 * @param fcfi FCFI 801 * @param vpi VPI (Set to -1 if unused.) 802 * 803 * @return Returns the number of bytes written. 804 */ 805int32_t 806sli_cmd_init_vfi(sli4_t *sli4, void *buf, size_t size, uint16_t vfi, 807 uint16_t fcfi, uint16_t vpi) 808{ 809 sli4_cmd_init_vfi_t *init_vfi = buf; 810 811 ocs_memset(buf, 0, size); 812 813 init_vfi->hdr.command = SLI4_MBOX_COMMAND_INIT_VFI; 814 815 init_vfi->vfi = vfi; 816 init_vfi->fcfi = fcfi; 817 818 /* 819 * If the VPI is valid, initialize it at the same time as 820 * the VFI 821 */ 822 if (0xffff != vpi) { 823 init_vfi->vp = TRUE; 824 init_vfi->vpi = vpi; 825 } 826 827 return sizeof(sli4_cmd_init_vfi_t); 828} 829 830/** 831 * @ingroup sli 832 * @brief Write an INIT_VPI command to the provided buffer. 833 * 834 * @param sli4 SLI context pointer. 835 * @param buf Virtual pointer to the destination buffer. 836 * @param size Buffer size, in bytes. 837 * @param vpi VPI allocated. 838 * @param vfi VFI associated with this VPI. 839 * 840 * @return Returns the number of bytes written. 841 */ 842int32_t 843sli_cmd_init_vpi(sli4_t *sli4, void *buf, size_t size, uint16_t vpi, uint16_t vfi) 844{ 845 sli4_cmd_init_vpi_t *init_vpi = buf; 846 847 ocs_memset(buf, 0, size); 848 849 init_vpi->hdr.command = SLI4_MBOX_COMMAND_INIT_VPI; 850 init_vpi->vpi = vpi; 851 init_vpi->vfi = vfi; 852 853 return sizeof(sli4_cmd_init_vpi_t); 854} 855 856/** 857 * @ingroup sli 858 * @brief Write a POST_XRI command to the provided buffer. 859 * 860 * @param sli4 SLI context pointer. 861 * @param buf Virtual pointer to the destination buffer. 862 * @param size Buffer size, in bytes. 863 * @param xri_base Starting XRI value for range of XRI given to SLI Port. 864 * @param xri_count Number of XRIs provided to the SLI Port. 865 * 866 * @return Returns the number of bytes written. 867 */ 868int32_t 869sli_cmd_post_xri(sli4_t *sli4, void *buf, size_t size, uint16_t xri_base, uint16_t xri_count) 870{ 871 sli4_cmd_post_xri_t *post_xri = buf; 872 873 ocs_memset(buf, 0, size); 874 875 post_xri->hdr.command = SLI4_MBOX_COMMAND_POST_XRI; 876 post_xri->xri_base = xri_base; 877 post_xri->xri_count = xri_count; 878 879 if (sli4->config.auto_xfer_rdy == 0) { 880 post_xri->enx = TRUE; 881 post_xri->val = TRUE; 882 } 883 884 return sizeof(sli4_cmd_post_xri_t); 885} 886 887/** 888 * @ingroup sli 889 * @brief Write a RELEASE_XRI command to the provided buffer. 890 * 891 * @param sli4 SLI context pointer. 892 * @param buf Virtual pointer to the destination buffer. 893 * @param size Buffer size, in bytes. 894 * @param num_xri The number of XRIs to be released. 895 * 896 * @return Returns the number of bytes written. 897 */ 898int32_t 899sli_cmd_release_xri(sli4_t *sli4, void *buf, size_t size, uint8_t num_xri) 900{ 901 sli4_cmd_release_xri_t *release_xri = buf; 902 903 ocs_memset(buf, 0, size); 904 905 release_xri->hdr.command = SLI4_MBOX_COMMAND_RELEASE_XRI; 906 release_xri->xri_count = num_xri; 907 908 return sizeof(sli4_cmd_release_xri_t); 909} 910 911/** 912 * @brief Write a READ_CONFIG command to the provided buffer. 913 * 914 * @param sli4 SLI context pointer. 915 * @param buf Virtual pointer to the destination buffer. 916 * @param size Buffer size, in bytes 917 * 918 * @return Returns the number of bytes written. 919 */ 920static int32_t 921sli_cmd_read_config(sli4_t *sli4, void *buf, size_t size) 922{ 923 sli4_cmd_read_config_t *read_config = buf; 924 925 ocs_memset(buf, 0, size); 926 927 read_config->hdr.command = SLI4_MBOX_COMMAND_READ_CONFIG; 928 929 return sizeof(sli4_cmd_read_config_t); 930} 931 932/** 933 * @brief Write a READ_NVPARMS command to the provided buffer. 934 * 935 * @param sli4 SLI context pointer. 936 * @param buf Virtual pointer to the destination buffer. 937 * @param size Buffer size, in bytes. 938 * 939 * @return Returns the number of bytes written. 940 */ 941int32_t 942sli_cmd_read_nvparms(sli4_t *sli4, void *buf, size_t size) 943{ 944 sli4_cmd_read_nvparms_t *read_nvparms = buf; 945 946 ocs_memset(buf, 0, size); 947 948 read_nvparms->hdr.command = SLI4_MBOX_COMMAND_READ_NVPARMS; 949 950 return sizeof(sli4_cmd_read_nvparms_t); 951} 952 953/** 954 * @brief Write a WRITE_NVPARMS command to the provided buffer. 955 * 956 * @param sli4 SLI context pointer. 957 * @param buf Virtual pointer to the destination buffer. 958 * @param size Buffer size, in bytes. 959 * @param wwpn WWPN to write - pointer to array of 8 uint8_t. 960 * @param wwnn WWNN to write - pointer to array of 8 uint8_t. 961 * @param hard_alpa Hard ALPA to write. 962 * @param preferred_d_id Preferred D_ID to write. 963 * 964 * @return Returns the number of bytes written. 965 */ 966int32_t 967sli_cmd_write_nvparms(sli4_t *sli4, void *buf, size_t size, uint8_t *wwpn, uint8_t *wwnn, uint8_t hard_alpa, 968 uint32_t preferred_d_id) 969{ 970 sli4_cmd_write_nvparms_t *write_nvparms = buf; 971 972 ocs_memset(buf, 0, size); 973 974 write_nvparms->hdr.command = SLI4_MBOX_COMMAND_WRITE_NVPARMS; 975 ocs_memcpy(write_nvparms->wwpn, wwpn, 8); 976 ocs_memcpy(write_nvparms->wwnn, wwnn, 8); 977 write_nvparms->hard_alpa = hard_alpa; 978 write_nvparms->preferred_d_id = preferred_d_id; 979 980 return sizeof(sli4_cmd_write_nvparms_t); 981} 982 983/** 984 * @brief Write a READ_REV command to the provided buffer. 985 * 986 * @param sli4 SLI context pointer. 987 * @param buf Virtual pointer to the destination buffer. 988 * @param size Buffer size, in bytes. 989 * @param vpd Pointer to the buffer. 990 * 991 * @return Returns the number of bytes written. 992 */ 993static int32_t 994sli_cmd_read_rev(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *vpd) 995{ 996 sli4_cmd_read_rev_t *read_rev = buf; 997 998 ocs_memset(buf, 0, size); 999 1000 read_rev->hdr.command = SLI4_MBOX_COMMAND_READ_REV; 1001 1002 if (vpd && vpd->size) { 1003 read_rev->vpd = TRUE; 1004 1005 read_rev->available_length = vpd->size; 1006 1007 read_rev->physical_address_low = ocs_addr32_lo(vpd->phys); 1008 read_rev->physical_address_high = ocs_addr32_hi(vpd->phys); 1009 } 1010 1011 return sizeof(sli4_cmd_read_rev_t); 1012} 1013 1014/** 1015 * @ingroup sli 1016 * @brief Write a READ_SPARM64 command to the provided buffer. 1017 * 1018 * @param sli4 SLI context pointer. 1019 * @param buf Virtual pointer to the destination buffer. 1020 * @param size Buffer size, in bytes. 1021 * @param dma DMA buffer for the service parameters. 1022 * @param vpi VPI used to determine the WWN. 1023 * 1024 * @return Returns the number of bytes written. 1025 */ 1026int32_t 1027sli_cmd_read_sparm64(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma, 1028 uint16_t vpi) 1029{ 1030 sli4_cmd_read_sparm64_t *read_sparm64 = buf; 1031 1032 ocs_memset(buf, 0, size); 1033 1034 if (SLI4_READ_SPARM64_VPI_SPECIAL == vpi) { 1035 ocs_log_test(sli4->os, "special VPI not supported!!!\n"); 1036 return -1; 1037 } 1038 1039 if (!dma || !dma->phys) { 1040 ocs_log_test(sli4->os, "bad DMA buffer\n"); 1041 return -1; 1042 } 1043 1044 read_sparm64->hdr.command = SLI4_MBOX_COMMAND_READ_SPARM64; 1045 1046 read_sparm64->bde_64.bde_type = SLI4_BDE_TYPE_BDE_64; 1047 read_sparm64->bde_64.buffer_length = dma->size; 1048 read_sparm64->bde_64.u.data.buffer_address_low = ocs_addr32_lo(dma->phys); 1049 read_sparm64->bde_64.u.data.buffer_address_high = ocs_addr32_hi(dma->phys); 1050 1051 read_sparm64->vpi = vpi; 1052 1053 return sizeof(sli4_cmd_read_sparm64_t); 1054} 1055 1056/** 1057 * @ingroup sli 1058 * @brief Write a READ_TOPOLOGY command to the provided buffer. 1059 * 1060 * @param sli4 SLI context pointer. 1061 * @param buf Virtual pointer to the destination buffer. 1062 * @param size Buffer size, in bytes. 1063 * @param dma DMA buffer for loop map (optional). 1064 * 1065 * @return Returns the number of bytes written. 1066 */ 1067int32_t 1068sli_cmd_read_topology(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma) 1069{ 1070 sli4_cmd_read_topology_t *read_topo = buf; 1071 1072 ocs_memset(buf, 0, size); 1073 1074 read_topo->hdr.command = SLI4_MBOX_COMMAND_READ_TOPOLOGY; 1075 1076 if (dma && dma->size) { 1077 if (dma->size < SLI4_MIN_LOOP_MAP_BYTES) { 1078 ocs_log_test(sli4->os, "loop map buffer too small %jd\n", 1079 dma->size); 1080 return 0; 1081 } 1082 1083 ocs_memset(dma->virt, 0, dma->size); 1084 1085 read_topo->bde_loop_map.bde_type = SLI4_BDE_TYPE_BDE_64; 1086 read_topo->bde_loop_map.buffer_length = dma->size; 1087 read_topo->bde_loop_map.u.data.buffer_address_low = ocs_addr32_lo(dma->phys); 1088 read_topo->bde_loop_map.u.data.buffer_address_high = ocs_addr32_hi(dma->phys); 1089 } 1090 1091 return sizeof(sli4_cmd_read_topology_t); 1092} 1093 1094/** 1095 * @ingroup sli 1096 * @brief Write a REG_FCFI command to the provided buffer. 1097 * 1098 * @param sli4 SLI context pointer. 1099 * @param buf Virtual pointer to the destination buffer. 1100 * @param size Buffer size, in bytes. 1101 * @param index FCF index returned by READ_FCF_TABLE. 1102 * @param rq_cfg RQ_ID/R_CTL/TYPE routing information 1103 * @param vlan_id VLAN ID tag. 1104 * 1105 * @return Returns the number of bytes written. 1106 */ 1107int32_t 1108sli_cmd_reg_fcfi(sli4_t *sli4, void *buf, size_t size, uint16_t index, sli4_cmd_rq_cfg_t rq_cfg[SLI4_CMD_REG_FCFI_NUM_RQ_CFG], uint16_t vlan_id) 1109{ 1110 sli4_cmd_reg_fcfi_t *reg_fcfi = buf; 1111 uint32_t i; 1112 1113 ocs_memset(buf, 0, size); 1114 1115 reg_fcfi->hdr.command = SLI4_MBOX_COMMAND_REG_FCFI; 1116 1117 reg_fcfi->fcf_index = index; 1118 1119 for (i = 0; i < SLI4_CMD_REG_FCFI_NUM_RQ_CFG; i++) { 1120 switch(i) { 1121 case 0: reg_fcfi->rq_id_0 = rq_cfg[0].rq_id; break; 1122 case 1: reg_fcfi->rq_id_1 = rq_cfg[1].rq_id; break; 1123 case 2: reg_fcfi->rq_id_2 = rq_cfg[2].rq_id; break; 1124 case 3: reg_fcfi->rq_id_3 = rq_cfg[3].rq_id; break; 1125 } 1126 reg_fcfi->rq_cfg[i].r_ctl_mask = rq_cfg[i].r_ctl_mask; 1127 reg_fcfi->rq_cfg[i].r_ctl_match = rq_cfg[i].r_ctl_match; 1128 reg_fcfi->rq_cfg[i].type_mask = rq_cfg[i].type_mask; 1129 reg_fcfi->rq_cfg[i].type_match = rq_cfg[i].type_match; 1130 } 1131 1132 if (vlan_id) { 1133 reg_fcfi->vv = TRUE; 1134 reg_fcfi->vlan_tag = vlan_id; 1135 } 1136 1137 return sizeof(sli4_cmd_reg_fcfi_t); 1138} 1139 1140/** 1141 * @brief Write REG_FCFI_MRQ to provided command buffer 1142 * 1143 * @param sli4 SLI context pointer. 1144 * @param buf Virtual pointer to the destination buffer. 1145 * @param size Buffer size, in bytes. 1146 * @param fcf_index FCF index returned by READ_FCF_TABLE. 1147 * @param vlan_id VLAN ID tag. 1148 * @param rr_quant Round robin quanta if RQ selection policy is 2 1149 * @param rq_selection_policy RQ selection policy 1150 * @param num_rqs Array of count of RQs per filter 1151 * @param rq_ids Array of RQ ids per filter 1152 * @param rq_cfg RQ_ID/R_CTL/TYPE routing information 1153 * 1154 * @return returns 0 for success, a negative error code value for failure. 1155 */ 1156int32_t 1157sli_cmd_reg_fcfi_mrq(sli4_t *sli4, void *buf, size_t size, uint8_t mode, 1158 uint16_t fcf_index, uint16_t vlan_id, uint8_t rq_selection_policy, 1159 uint8_t mrq_bit_mask, uint16_t num_mrqs, 1160 sli4_cmd_rq_cfg_t rq_cfg[SLI4_CMD_REG_FCFI_NUM_RQ_CFG]) 1161{ 1162 sli4_cmd_reg_fcfi_mrq_t *reg_fcfi_mrq = buf; 1163 uint32_t i; 1164 1165 ocs_memset(buf, 0, size); 1166 1167 reg_fcfi_mrq->hdr.command = SLI4_MBOX_COMMAND_REG_FCFI_MRQ; 1168 if (mode == SLI4_CMD_REG_FCFI_SET_FCFI_MODE) { 1169 reg_fcfi_mrq->fcf_index = fcf_index; 1170 if (vlan_id) { 1171 reg_fcfi_mrq->vv = TRUE; 1172 reg_fcfi_mrq->vlan_tag = vlan_id; 1173 } 1174 goto done; 1175 } 1176 1177 reg_fcfi_mrq->mode = mode; 1178 for (i = 0; i < SLI4_CMD_REG_FCFI_NUM_RQ_CFG; i++) { 1179 reg_fcfi_mrq->rq_cfg[i].r_ctl_mask = rq_cfg[i].r_ctl_mask; 1180 reg_fcfi_mrq->rq_cfg[i].r_ctl_match = rq_cfg[i].r_ctl_match; 1181 reg_fcfi_mrq->rq_cfg[i].type_mask = rq_cfg[i].type_mask; 1182 reg_fcfi_mrq->rq_cfg[i].type_match = rq_cfg[i].type_match; 1183 1184 switch(i) { 1185 case 3: reg_fcfi_mrq->rq_id_3 = rq_cfg[i].rq_id; break; 1186 case 2: reg_fcfi_mrq->rq_id_2 = rq_cfg[i].rq_id; break; 1187 case 1: reg_fcfi_mrq->rq_id_1 = rq_cfg[i].rq_id; break; 1188 case 0: reg_fcfi_mrq->rq_id_0 = rq_cfg[i].rq_id; break; 1189 } 1190 } 1191 1192 reg_fcfi_mrq->rq_selection_policy = rq_selection_policy; 1193 reg_fcfi_mrq->mrq_filter_bitmask = mrq_bit_mask; 1194 reg_fcfi_mrq->num_mrq_pairs = num_mrqs; 1195done: 1196 return sizeof(sli4_cmd_reg_fcfi_mrq_t); 1197} 1198 1199/** 1200 * @ingroup sli 1201 * @brief Write a REG_RPI command to the provided buffer. 1202 * 1203 * @param sli4 SLI context pointer. 1204 * @param buf Virtual pointer to the destination buffer. 1205 * @param size Buffer size, in bytes. 1206 * @param nport_id Remote F/N_Port_ID. 1207 * @param rpi Previously-allocated Remote Port Indicator. 1208 * @param vpi Previously-allocated Virtual Port Indicator. 1209 * @param dma DMA buffer that contains the remote port's service parameters. 1210 * @param update Boolean indicating an update to an existing RPI (TRUE) 1211 * or a new registration (FALSE). 1212 * 1213 * @return Returns the number of bytes written. 1214 */ 1215int32_t 1216sli_cmd_reg_rpi(sli4_t *sli4, void *buf, size_t size, uint32_t nport_id, uint16_t rpi, 1217 uint16_t vpi, ocs_dma_t *dma, uint8_t update, uint8_t enable_t10_pi) 1218{ 1219 sli4_cmd_reg_rpi_t *reg_rpi = buf; 1220 1221 ocs_memset(buf, 0, size); 1222 1223 reg_rpi->hdr.command = SLI4_MBOX_COMMAND_REG_RPI; 1224 1225 reg_rpi->rpi = rpi; 1226 reg_rpi->remote_n_port_id = nport_id; 1227 reg_rpi->upd = update; 1228 reg_rpi->etow = enable_t10_pi; 1229 1230 reg_rpi->bde_64.bde_type = SLI4_BDE_TYPE_BDE_64; 1231 reg_rpi->bde_64.buffer_length = SLI4_REG_RPI_BUF_LEN; 1232 reg_rpi->bde_64.u.data.buffer_address_low = ocs_addr32_lo(dma->phys); 1233 reg_rpi->bde_64.u.data.buffer_address_high = ocs_addr32_hi(dma->phys); 1234 1235 reg_rpi->vpi = vpi; 1236 1237 return sizeof(sli4_cmd_reg_rpi_t); 1238} 1239 1240/** 1241 * @ingroup sli 1242 * @brief Write a REG_VFI command to the provided buffer. 1243 * 1244 * @param sli4 SLI context pointer. 1245 * @param buf Virtual pointer to the destination buffer. 1246 * @param size Buffer size, in bytes. 1247 * @param domain Pointer to the domain object. 1248 * 1249 * @return Returns the number of bytes written. 1250 */ 1251int32_t 1252sli_cmd_reg_vfi(sli4_t *sli4, void *buf, size_t size, ocs_domain_t *domain) 1253{ 1254 sli4_cmd_reg_vfi_t *reg_vfi = buf; 1255 1256 if (!sli4 || !buf || !domain) { 1257 return 0; 1258 } 1259 1260 ocs_memset(buf, 0, size); 1261 1262 reg_vfi->hdr.command = SLI4_MBOX_COMMAND_REG_VFI; 1263 1264 reg_vfi->vfi = domain->indicator; 1265 1266 reg_vfi->fcfi = domain->fcf_indicator; 1267 1268 /* TODO contents of domain->dma only valid if topo == FABRIC */ 1269 reg_vfi->sparm.bde_type = SLI4_BDE_TYPE_BDE_64; 1270 reg_vfi->sparm.buffer_length = 0x70; 1271 reg_vfi->sparm.u.data.buffer_address_low = ocs_addr32_lo(domain->dma.phys); 1272 reg_vfi->sparm.u.data.buffer_address_high = ocs_addr32_hi(domain->dma.phys); 1273 1274 reg_vfi->e_d_tov = sli4->config.e_d_tov; 1275 reg_vfi->r_a_tov = sli4->config.r_a_tov; 1276 1277 reg_vfi->vp = TRUE; 1278 reg_vfi->vpi = domain->sport->indicator; 1279 ocs_memcpy(reg_vfi->wwpn, &domain->sport->sli_wwpn, sizeof(reg_vfi->wwpn)); 1280 reg_vfi->local_n_port_id = domain->sport->fc_id; 1281 1282 return sizeof(sli4_cmd_reg_vfi_t); 1283} 1284 1285/** 1286 * @ingroup sli 1287 * @brief Write a REG_VPI command to the provided buffer. 1288 * 1289 * @param sli4 SLI context pointer. 1290 * @param buf Virtual pointer to the destination buffer. 1291 * @param size Buffer size, in bytes. 1292 * @param sport Point to SLI Port object. 1293 * @param update Boolean indicating whether to update the existing VPI (true) 1294 * or create a new VPI (false). 1295 * 1296 * @return Returns the number of bytes written. 1297 */ 1298int32_t 1299sli_cmd_reg_vpi(sli4_t *sli4, void *buf, size_t size, ocs_sli_port_t *sport, uint8_t update) 1300{ 1301 sli4_cmd_reg_vpi_t *reg_vpi = buf; 1302 1303 if (!sli4 || !buf || !sport) { 1304 return 0; 1305 } 1306 1307 ocs_memset(buf, 0, size); 1308 1309 reg_vpi->hdr.command = SLI4_MBOX_COMMAND_REG_VPI; 1310 1311 reg_vpi->local_n_port_id = sport->fc_id; 1312 reg_vpi->upd = update != 0; 1313 ocs_memcpy(reg_vpi->wwpn, &sport->sli_wwpn, sizeof(reg_vpi->wwpn)); 1314 reg_vpi->vpi = sport->indicator; 1315 reg_vpi->vfi = sport->domain->indicator; 1316 1317 return sizeof(sli4_cmd_reg_vpi_t); 1318} 1319 1320/** 1321 * @brief Write a REQUEST_FEATURES command to the provided buffer. 1322 * 1323 * @param sli4 SLI context pointer. 1324 * @param buf Virtual pointer to the destination buffer. 1325 * @param size Buffer size, in bytes. 1326 * @param mask Features to request. 1327 * @param query Use feature query mode (does not change FW). 1328 * 1329 * @return Returns the number of bytes written. 1330 */ 1331static int32_t 1332sli_cmd_request_features(sli4_t *sli4, void *buf, size_t size, sli4_features_t mask, uint8_t query) 1333{ 1334 sli4_cmd_request_features_t *features = buf; 1335 1336 ocs_memset(buf, 0, size); 1337 1338 features->hdr.command = SLI4_MBOX_COMMAND_REQUEST_FEATURES; 1339 1340 if (query) { 1341 features->qry = TRUE; 1342 } 1343 features->command.dword = mask.dword; 1344 1345 return sizeof(sli4_cmd_request_features_t); 1346} 1347 1348/** 1349 * @ingroup sli 1350 * @brief Write a SLI_CONFIG command to the provided buffer. 1351 * 1352 * @param sli4 SLI context pointer. 1353 * @param buf Virtual pointer to the destination buffer. 1354 * @param size Buffer size, in bytes. 1355 * @param length Length in bytes of attached command. 1356 * @param dma DMA buffer for non-embedded commands. 1357 * 1358 * @return Returns the number of bytes written. 1359 */ 1360int32_t 1361sli_cmd_sli_config(sli4_t *sli4, void *buf, size_t size, uint32_t length, ocs_dma_t *dma) 1362{ 1363 sli4_cmd_sli_config_t *sli_config = NULL; 1364 1365 if ((length > sizeof(sli_config->payload.embed)) && (dma == NULL)) { 1366 ocs_log_test(sli4->os, "length(%d) > payload(%ld)\n", 1367 length, sizeof(sli_config->payload.embed)); 1368 return -1; 1369 } 1370 1371 sli_config = buf; 1372 1373 ocs_memset(buf, 0, size); 1374 1375 sli_config->hdr.command = SLI4_MBOX_COMMAND_SLI_CONFIG; 1376 if (NULL == dma) { 1377 sli_config->emb = TRUE; 1378 sli_config->payload_length = length; 1379 } else { 1380 sli_config->emb = FALSE; 1381 1382 sli_config->pmd_count = 1; 1383 1384 sli_config->payload.mem.address_low = ocs_addr32_lo(dma->phys); 1385 sli_config->payload.mem.address_high = ocs_addr32_hi(dma->phys); 1386 sli_config->payload.mem.length = dma->size; 1387 sli_config->payload_length = dma->size; 1388#if defined(OCS_INCLUDE_DEBUG) 1389 /* save pointer to DMA for BMBX dumping purposes */ 1390 sli4->bmbx_non_emb_pmd = dma; 1391#endif 1392 } 1393 1394 return offsetof(sli4_cmd_sli_config_t, payload.embed); 1395} 1396 1397/** 1398 * @brief Initialize SLI Port control register. 1399 * 1400 * @param sli4 SLI context pointer. 1401 * @param endian Endian value to write. 1402 * 1403 * @return Returns 0 on success, or a negative error code value on failure. 1404 */ 1405 1406static int32_t 1407sli_sliport_control(sli4_t *sli4, uint32_t endian) 1408{ 1409 uint32_t iter; 1410 int32_t rc; 1411 1412 rc = -1; 1413 1414 /* Initialize port, endian */ 1415 sli_reg_write(sli4, SLI4_REG_SLIPORT_CONTROL, endian | SLI4_SLIPORT_CONTROL_IP); 1416 1417 for (iter = 0; iter < 3000; iter ++) { 1418 ocs_udelay(SLI4_INIT_PORT_DELAY_US); 1419 if (sli_fw_ready(sli4) == 1) { 1420 rc = 0; 1421 break; 1422 } 1423 } 1424 1425 if (rc != 0) { 1426 ocs_log_crit(sli4->os, "port failed to become ready after initialization\n"); 1427 } 1428 1429 return rc; 1430} 1431 1432/** 1433 * @ingroup sli 1434 * @brief Write a UNREG_FCFI command to the provided buffer. 1435 * 1436 * @param sli4 SLI context pointer. 1437 * @param buf Virtual pointer to the destination buffer. 1438 * @param size Buffer size, in bytes. 1439 * @param indicator Indicator value. 1440 * 1441 * @return Returns the number of bytes written. 1442 */ 1443int32_t 1444sli_cmd_unreg_fcfi(sli4_t *sli4, void *buf, size_t size, uint16_t indicator) 1445{ 1446 sli4_cmd_unreg_fcfi_t *unreg_fcfi = buf; 1447 1448 if (!sli4 || !buf) { 1449 return 0; 1450 } 1451 1452 ocs_memset(buf, 0, size); 1453 1454 unreg_fcfi->hdr.command = SLI4_MBOX_COMMAND_UNREG_FCFI; 1455 1456 unreg_fcfi->fcfi = indicator; 1457 1458 return sizeof(sli4_cmd_unreg_fcfi_t); 1459} 1460 1461/** 1462 * @ingroup sli 1463 * @brief Write an UNREG_RPI command to the provided buffer. 1464 * 1465 * @param sli4 SLI context pointer. 1466 * @param buf Virtual pointer to the destination buffer. 1467 * @param size Buffer size, in bytes. 1468 * @param indicator Indicator value. 1469 * @param which Type of unregister, such as node, port, domain, or FCF. 1470 * @param fc_id FC address. 1471 * 1472 * @return Returns the number of bytes written. 1473 */ 1474int32_t 1475sli_cmd_unreg_rpi(sli4_t *sli4, void *buf, size_t size, uint16_t indicator, sli4_resource_e which, 1476 uint32_t fc_id) 1477{ 1478 sli4_cmd_unreg_rpi_t *unreg_rpi = buf; 1479 uint8_t index_indicator = 0; 1480 1481 if (!sli4 || !buf) { 1482 return 0; 1483 } 1484 1485 ocs_memset(buf, 0, size); 1486 1487 unreg_rpi->hdr.command = SLI4_MBOX_COMMAND_UNREG_RPI; 1488 1489 switch (which) { 1490 case SLI_RSRC_FCOE_RPI: 1491 index_indicator = SLI4_UNREG_RPI_II_RPI; 1492 if (fc_id != UINT32_MAX) { 1493 unreg_rpi->dp = TRUE; 1494 unreg_rpi->destination_n_port_id = fc_id & 0x00ffffff; 1495 } 1496 break; 1497 case SLI_RSRC_FCOE_VPI: 1498 index_indicator = SLI4_UNREG_RPI_II_VPI; 1499 break; 1500 case SLI_RSRC_FCOE_VFI: 1501 index_indicator = SLI4_UNREG_RPI_II_VFI; 1502 break; 1503 case SLI_RSRC_FCOE_FCFI: 1504 index_indicator = SLI4_UNREG_RPI_II_FCFI; 1505 break; 1506 default: 1507 ocs_log_test(sli4->os, "unknown type %#x\n", which); 1508 return 0; 1509 } 1510 1511 unreg_rpi->ii = index_indicator; 1512 unreg_rpi->index = indicator; 1513 1514 return sizeof(sli4_cmd_unreg_rpi_t); 1515} 1516 1517/** 1518 * @ingroup sli 1519 * @brief Write an UNREG_VFI command to the provided buffer. 1520 * 1521 * @param sli4 SLI context pointer. 1522 * @param buf Virtual pointer to the destination buffer. 1523 * @param size Buffer size, in bytes. 1524 * @param domain Pointer to the domain object 1525 * @param which Type of unregister, such as domain, FCFI, or everything. 1526 * 1527 * @return Returns the number of bytes written. 1528 */ 1529int32_t 1530sli_cmd_unreg_vfi(sli4_t *sli4, void *buf, size_t size, ocs_domain_t *domain, uint32_t which) 1531{ 1532 sli4_cmd_unreg_vfi_t *unreg_vfi = buf; 1533 1534 if (!sli4 || !buf || !domain) { 1535 return 0; 1536 } 1537 1538 ocs_memset(buf, 0, size); 1539 1540 unreg_vfi->hdr.command = SLI4_MBOX_COMMAND_UNREG_VFI; 1541 switch (which) { 1542 case SLI4_UNREG_TYPE_DOMAIN: 1543 unreg_vfi->index = domain->indicator; 1544 break; 1545 case SLI4_UNREG_TYPE_FCF: 1546 unreg_vfi->index = domain->fcf_indicator; 1547 break; 1548 case SLI4_UNREG_TYPE_ALL: 1549 unreg_vfi->index = UINT16_MAX; 1550 break; 1551 default: 1552 return 0; 1553 } 1554 1555 if (SLI4_UNREG_TYPE_DOMAIN != which) { 1556 unreg_vfi->ii = SLI4_UNREG_VFI_II_FCFI; 1557 } 1558 1559 return sizeof(sli4_cmd_unreg_vfi_t); 1560} 1561 1562/** 1563 * @ingroup sli 1564 * @brief Write an UNREG_VPI command to the provided buffer. 1565 * 1566 * @param sli4 SLI context pointer. 1567 * @param buf Virtual pointer to the destination buffer. 1568 * @param size Buffer size, in bytes. 1569 * @param indicator Indicator value. 1570 * @param which Type of unregister: port, domain, FCFI, everything 1571 * 1572 * @return Returns the number of bytes written. 1573 */ 1574int32_t 1575sli_cmd_unreg_vpi(sli4_t *sli4, void *buf, size_t size, uint16_t indicator, uint32_t which) 1576{ 1577 sli4_cmd_unreg_vpi_t *unreg_vpi = buf; 1578 1579 if (!sli4 || !buf) { 1580 return 0; 1581 } 1582 1583 ocs_memset(buf, 0, size); 1584 1585 unreg_vpi->hdr.command = SLI4_MBOX_COMMAND_UNREG_VPI; 1586 unreg_vpi->index = indicator; 1587 switch (which) { 1588 case SLI4_UNREG_TYPE_PORT: 1589 unreg_vpi->ii = SLI4_UNREG_VPI_II_VPI; 1590 break; 1591 case SLI4_UNREG_TYPE_DOMAIN: 1592 unreg_vpi->ii = SLI4_UNREG_VPI_II_VFI; 1593 break; 1594 case SLI4_UNREG_TYPE_FCF: 1595 unreg_vpi->ii = SLI4_UNREG_VPI_II_FCFI; 1596 break; 1597 case SLI4_UNREG_TYPE_ALL: 1598 unreg_vpi->index = UINT16_MAX; /* override indicator */ 1599 unreg_vpi->ii = SLI4_UNREG_VPI_II_FCFI; 1600 break; 1601 default: 1602 return 0; 1603 } 1604 1605 return sizeof(sli4_cmd_unreg_vpi_t); 1606} 1607 1608/** 1609 * @ingroup sli 1610 * @brief Write an CONFIG_AUTO_XFER_RDY command to the provided buffer. 1611 * 1612 * @param sli4 SLI context pointer. 1613 * @param buf Virtual pointer to the destination buffer. 1614 * @param size Buffer size, in bytes. 1615 * @param max_burst_len if the write FCP_DL is less than this size, 1616 * then the SLI port will generate the auto XFER_RDY. 1617 * 1618 * @return Returns the number of bytes written. 1619 */ 1620int32_t 1621sli_cmd_config_auto_xfer_rdy(sli4_t *sli4, void *buf, size_t size, uint32_t max_burst_len) 1622{ 1623 sli4_cmd_config_auto_xfer_rdy_t *req = buf; 1624 1625 if (!sli4 || !buf) { 1626 return 0; 1627 } 1628 1629 ocs_memset(buf, 0, size); 1630 1631 req->hdr.command = SLI4_MBOX_COMMAND_CONFIG_AUTO_XFER_RDY; 1632 req->max_burst_len = max_burst_len; 1633 1634 return sizeof(sli4_cmd_config_auto_xfer_rdy_t); 1635} 1636 1637/** 1638 * @ingroup sli 1639 * @brief Write an CONFIG_AUTO_XFER_RDY_HP command to the provided buffer. 1640 * 1641 * @param sli4 SLI context pointer. 1642 * @param buf Virtual pointer to the destination buffer. 1643 * @param size Buffer size, in bytes. 1644 * @param max_burst_len if the write FCP_DL is less than this size, 1645 * @param esoc enable start offset computation, 1646 * @param block_size block size, 1647 * then the SLI port will generate the auto XFER_RDY. 1648 * 1649 * @return Returns the number of bytes written. 1650 */ 1651int32_t 1652sli_cmd_config_auto_xfer_rdy_hp(sli4_t *sli4, void *buf, size_t size, uint32_t max_burst_len, 1653 uint32_t esoc, uint32_t block_size ) 1654{ 1655 sli4_cmd_config_auto_xfer_rdy_hp_t *req = buf; 1656 1657 if (!sli4 || !buf) { 1658 return 0; 1659 } 1660 1661 ocs_memset(buf, 0, size); 1662 1663 req->hdr.command = SLI4_MBOX_COMMAND_CONFIG_AUTO_XFER_RDY_HP; 1664 req->max_burst_len = max_burst_len; 1665 req->esoc = esoc; 1666 req->block_size = block_size; 1667 return sizeof(sli4_cmd_config_auto_xfer_rdy_hp_t); 1668} 1669 1670/** 1671 * @brief Write a COMMON_FUNCTION_RESET command. 1672 * 1673 * @param sli4 SLI context. 1674 * @param buf Destination buffer for the command. 1675 * @param size Buffer size, in bytes. 1676 * 1677 * @return Returns the number of bytes written. 1678 */ 1679static int32_t 1680sli_cmd_common_function_reset(sli4_t *sli4, void *buf, size_t size) 1681{ 1682 sli4_req_common_function_reset_t *reset = NULL; 1683 uint32_t sli_config_off = 0; 1684 1685 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 1686 uint32_t payload_size; 1687 1688 /* Payload length must accommodate both request and response */ 1689 payload_size = max(sizeof(sli4_req_common_function_reset_t), 1690 sizeof(sli4_res_common_function_reset_t)); 1691 1692 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 1693 NULL); 1694 } 1695 reset = (sli4_req_common_function_reset_t *)((uint8_t *)buf + sli_config_off); 1696 1697 reset->hdr.opcode = SLI4_OPC_COMMON_FUNCTION_RESET; 1698 reset->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 1699 1700 return(sli_config_off + sizeof(sli4_req_common_function_reset_t)); 1701} 1702 1703/** 1704 * @brief Write a COMMON_CREATE_CQ command. 1705 * 1706 * @param sli4 SLI context. 1707 * @param buf Destination buffer for the command. 1708 * @param size Buffer size, in bytes. 1709 * @param qmem DMA memory for the queue. 1710 * @param eq_id Associated EQ_ID 1711 * @param ignored This parameter carries the ULP which is only used for WQ and RQs 1712 * 1713 * @note This creates a Version 0 message. 1714 * 1715 * @return Returns the number of bytes written. 1716 */ 1717static int32_t 1718sli_cmd_common_create_cq(sli4_t *sli4, void *buf, size_t size, 1719 ocs_dma_t *qmem, uint16_t eq_id, uint16_t ignored) 1720{ 1721 sli4_req_common_create_cq_v0_t *cqv0 = NULL; 1722 sli4_req_common_create_cq_v2_t *cqv2 = NULL; 1723 uint32_t sli_config_off = 0; 1724 uint32_t p; 1725 uintptr_t addr; 1726 uint32_t if_type = sli4->if_type; 1727 uint32_t page_bytes = 0; 1728 uint32_t num_pages = 0; 1729 uint32_t cmd_size = 0; 1730 uint32_t page_size = 0; 1731 uint32_t n_cqe = 0; 1732 1733 /* First calculate number of pages and the mailbox cmd length */ 1734 switch (if_type) 1735 { 1736 case SLI4_IF_TYPE_BE3_SKH_PF: 1737 page_bytes = SLI_PAGE_SIZE; 1738 num_pages = sli_page_count(qmem->size, page_bytes); 1739 cmd_size = sizeof(sli4_req_common_create_cq_v0_t) + (8 * num_pages); 1740 break; 1741 case SLI4_IF_TYPE_LANCER_FC_ETH: 1742 n_cqe = qmem->size / SLI4_CQE_BYTES; 1743 switch (n_cqe) { 1744 case 256: 1745 case 512: 1746 case 1024: 1747 case 2048: 1748 page_size = 1; 1749 break; 1750 case 4096: 1751 page_size = 2; 1752 break; 1753 default: 1754 return 0; 1755 } 1756 page_bytes = page_size * SLI_PAGE_SIZE; 1757 num_pages = sli_page_count(qmem->size, page_bytes); 1758 cmd_size = sizeof(sli4_req_common_create_cq_v2_t) + (8 * num_pages); 1759 break; 1760 default: 1761 ocs_log_test(sli4->os, "unsupported IF_TYPE %d\n", if_type); 1762 return -1; 1763 } 1764 1765 /* now that we have the mailbox command size, we can set SLI_CONFIG fields */ 1766 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 1767 uint32_t payload_size; 1768 1769 /* Payload length must accommodate both request and response */ 1770 payload_size = max((size_t)cmd_size, sizeof(sli4_res_common_create_queue_t)); 1771 1772 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 1773 NULL); 1774 } 1775 1776 switch (if_type) 1777 { 1778 case SLI4_IF_TYPE_BE3_SKH_PF: 1779 cqv0 = (sli4_req_common_create_cq_v0_t *)((uint8_t *)buf + sli_config_off); 1780 cqv0->hdr.opcode = SLI4_OPC_COMMON_CREATE_CQ; 1781 cqv0->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 1782 cqv0->hdr.version = 0; 1783 cqv0->hdr.request_length = cmd_size - sizeof(sli4_req_hdr_t); 1784 1785 /* valid values for number of pages: 1, 2, 4 (sec 4.4.3) */ 1786 cqv0->num_pages = num_pages; 1787 switch (cqv0->num_pages) { 1788 case 1: 1789 cqv0->cqecnt = SLI4_CQ_CNT_256; 1790 break; 1791 case 2: 1792 cqv0->cqecnt = SLI4_CQ_CNT_512; 1793 break; 1794 case 4: 1795 cqv0->cqecnt = SLI4_CQ_CNT_1024; 1796 break; 1797 default: 1798 ocs_log_test(sli4->os, "num_pages %d not valid\n", cqv0->num_pages); 1799 return -1; 1800 } 1801 cqv0->evt = TRUE; 1802 cqv0->valid = TRUE; 1803 /* TODO cq->nodelay = ???; */ 1804 /* TODO cq->clswm = ???; */ 1805 cqv0->arm = FALSE; 1806 cqv0->eq_id = eq_id; 1807 1808 for (p = 0, addr = qmem->phys; 1809 p < cqv0->num_pages; 1810 p++, addr += page_bytes) { 1811 cqv0->page_physical_address[p].low = ocs_addr32_lo(addr); 1812 cqv0->page_physical_address[p].high = ocs_addr32_hi(addr); 1813 } 1814 1815 break; 1816 case SLI4_IF_TYPE_LANCER_FC_ETH: 1817 { 1818 cqv2 = (sli4_req_common_create_cq_v2_t *)((uint8_t *)buf + sli_config_off); 1819 cqv2->hdr.opcode = SLI4_OPC_COMMON_CREATE_CQ; 1820 cqv2->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 1821 cqv2->hdr.version = 2; 1822 cqv2->hdr.request_length = cmd_size - sizeof(sli4_req_hdr_t); 1823 1824 cqv2->page_size = page_size; 1825 1826 /* valid values for number of pages: 1, 2, 4, 8 (sec 4.4.3) */ 1827 cqv2->num_pages = num_pages; 1828 if (!cqv2->num_pages || (cqv2->num_pages > SLI4_COMMON_CREATE_CQ_V2_MAX_PAGES)) { 1829 return 0; 1830 } 1831 1832 switch (cqv2->num_pages) { 1833 case 1: 1834 cqv2->cqecnt = SLI4_CQ_CNT_256; 1835 break; 1836 case 2: 1837 cqv2->cqecnt = SLI4_CQ_CNT_512; 1838 break; 1839 case 4: 1840 cqv2->cqecnt = SLI4_CQ_CNT_1024; 1841 break; 1842 case 8: 1843 cqv2->cqecnt = SLI4_CQ_CNT_LARGE; 1844 cqv2->cqe_count = n_cqe; 1845 break; 1846 default: 1847 ocs_log_test(sli4->os, "num_pages %d not valid\n", cqv2->num_pages); 1848 return -1; 1849 } 1850 1851 cqv2->evt = TRUE; 1852 cqv2->valid = TRUE; 1853 /* TODO cq->nodelay = ???; */ 1854 /* TODO cq->clswm = ???; */ 1855 cqv2->arm = FALSE; 1856 cqv2->eq_id = eq_id; 1857 1858 for (p = 0, addr = qmem->phys; 1859 p < cqv2->num_pages; 1860 p++, addr += page_bytes) { 1861 cqv2->page_physical_address[p].low = ocs_addr32_lo(addr); 1862 cqv2->page_physical_address[p].high = ocs_addr32_hi(addr); 1863 } 1864 } 1865 break; 1866 } 1867 1868 return (sli_config_off + cmd_size); 1869} 1870 1871/** 1872 * @brief Write a COMMON_DESTROY_CQ command. 1873 * 1874 * @param sli4 SLI context. 1875 * @param buf Destination buffer for the command. 1876 * @param size Buffer size, in bytes. 1877 * @param cq_id CQ ID 1878 * 1879 * @note This creates a Version 0 message. 1880 * 1881 * @return Returns the number of bytes written. 1882 */ 1883static int32_t 1884sli_cmd_common_destroy_cq(sli4_t *sli4, void *buf, size_t size, uint16_t cq_id) 1885{ 1886 sli4_req_common_destroy_cq_t *cq = NULL; 1887 uint32_t sli_config_off = 0; 1888 1889 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 1890 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 1891 /* Payload length must accommodate both request and response */ 1892 max(sizeof(sli4_req_common_destroy_cq_t), 1893 sizeof(sli4_res_hdr_t)), 1894 NULL); 1895 } 1896 cq = (sli4_req_common_destroy_cq_t *)((uint8_t *)buf + sli_config_off); 1897 1898 cq->hdr.opcode = SLI4_OPC_COMMON_DESTROY_CQ; 1899 cq->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 1900 cq->hdr.request_length = sizeof(sli4_req_common_destroy_cq_t) - 1901 sizeof(sli4_req_hdr_t); 1902 cq->cq_id = cq_id; 1903 1904 return(sli_config_off + sizeof(sli4_req_common_destroy_cq_t)); 1905} 1906 1907/** 1908 * @brief Write a COMMON_MODIFY_EQ_DELAY command. 1909 * 1910 * @param sli4 SLI context. 1911 * @param buf Destination buffer for the command. 1912 * @param size Buffer size, in bytes. 1913 * @param q Queue object array. 1914 * @param num_q Queue object array count. 1915 * @param shift Phase shift for staggering interrupts. 1916 * @param delay_mult Delay multiplier for limiting interrupt frequency. 1917 * 1918 * @return Returns the number of bytes written. 1919 */ 1920static int32_t 1921sli_cmd_common_modify_eq_delay(sli4_t *sli4, void *buf, size_t size, sli4_queue_t *q, int num_q, uint32_t shift, 1922 uint32_t delay_mult) 1923{ 1924 sli4_req_common_modify_eq_delay_t *modify_delay = NULL; 1925 uint32_t sli_config_off = 0; 1926 int i; 1927 1928 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 1929 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 1930 /* Payload length must accommodate both request and response */ 1931 max(sizeof(sli4_req_common_modify_eq_delay_t), sizeof(sli4_res_hdr_t)), 1932 NULL); 1933 } 1934 1935 modify_delay = (sli4_req_common_modify_eq_delay_t *)((uint8_t *)buf + sli_config_off); 1936 1937 modify_delay->hdr.opcode = SLI4_OPC_COMMON_MODIFY_EQ_DELAY; 1938 modify_delay->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 1939 modify_delay->hdr.request_length = sizeof(sli4_req_common_modify_eq_delay_t) - 1940 sizeof(sli4_req_hdr_t); 1941 1942 modify_delay->num_eq = num_q; 1943 1944 for (i = 0; i<num_q; i++) { 1945 modify_delay->eq_delay_record[i].eq_id = q[i].id; 1946 modify_delay->eq_delay_record[i].phase = shift; 1947 modify_delay->eq_delay_record[i].delay_multiplier = delay_mult; 1948 } 1949 1950 return(sli_config_off + sizeof(sli4_req_common_modify_eq_delay_t)); 1951} 1952 1953/** 1954 * @brief Write a COMMON_CREATE_EQ command. 1955 * 1956 * @param sli4 SLI context. 1957 * @param buf Destination buffer for the command. 1958 * @param size Buffer size, in bytes. 1959 * @param qmem DMA memory for the queue. 1960 * @param ignored1 Ignored (used for consistency among queue creation functions). 1961 * @param ignored2 Ignored (used for consistency among queue creation functions). 1962 * 1963 * @note Other queue creation routines use the last parameter to pass in 1964 * the associated Q_ID and ULP. EQ doesn't have an associated queue or ULP, 1965 * so these parameters are ignored 1966 * 1967 * @note This creates a Version 0 message 1968 * 1969 * @return Returns the number of bytes written. 1970 */ 1971static int32_t 1972sli_cmd_common_create_eq(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *qmem, 1973 uint16_t ignored1, uint16_t ignored2) 1974{ 1975 sli4_req_common_create_eq_t *eq = NULL; 1976 uint32_t sli_config_off = 0; 1977 uint32_t p; 1978 uintptr_t addr; 1979 1980 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 1981 uint32_t payload_size; 1982 1983 /* Payload length must accommodate both request and response */ 1984 payload_size = max(sizeof(sli4_req_common_create_eq_t), 1985 sizeof(sli4_res_common_create_queue_t)); 1986 1987 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 1988 NULL); 1989 } 1990 eq = (sli4_req_common_create_eq_t *)((uint8_t *)buf + sli_config_off); 1991 1992 eq->hdr.opcode = SLI4_OPC_COMMON_CREATE_EQ; 1993 eq->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 1994 eq->hdr.request_length = sizeof(sli4_req_common_create_eq_t) - 1995 sizeof(sli4_req_hdr_t); 1996 /* valid values for number of pages: 1, 2, 4 (sec 4.4.3) */ 1997 eq->num_pages = qmem->size / SLI_PAGE_SIZE; 1998 switch (eq->num_pages) { 1999 case 1: 2000 eq->eqesz = SLI4_EQE_SIZE_4; 2001 eq->count = SLI4_EQ_CNT_1024; 2002 break; 2003 case 2: 2004 eq->eqesz = SLI4_EQE_SIZE_4; 2005 eq->count = SLI4_EQ_CNT_2048; 2006 break; 2007 case 4: 2008 eq->eqesz = SLI4_EQE_SIZE_4; 2009 eq->count = SLI4_EQ_CNT_4096; 2010 break; 2011 default: 2012 ocs_log_test(sli4->os, "num_pages %d not valid\n", eq->num_pages); 2013 return -1; 2014 } 2015 eq->valid = TRUE; 2016 eq->arm = FALSE; 2017 eq->delay_multiplier = 32; 2018 2019 for (p = 0, addr = qmem->phys; 2020 p < eq->num_pages; 2021 p++, addr += SLI_PAGE_SIZE) { 2022 eq->page_address[p].low = ocs_addr32_lo(addr); 2023 eq->page_address[p].high = ocs_addr32_hi(addr); 2024 } 2025 2026 return(sli_config_off + sizeof(sli4_req_common_create_eq_t)); 2027} 2028 2029/** 2030 * @brief Write a COMMON_DESTROY_EQ command. 2031 * 2032 * @param sli4 SLI context. 2033 * @param buf Destination buffer for the command. 2034 * @param size Buffer size, in bytes. 2035 * @param eq_id Queue ID to destroy. 2036 * 2037 * @note Other queue creation routines use the last parameter to pass in 2038 * the associated Q_ID. EQ doesn't have an associated queue so this 2039 * parameter is ignored. 2040 * 2041 * @note This creates a Version 0 message. 2042 * 2043 * @return Returns the number of bytes written. 2044 */ 2045static int32_t 2046sli_cmd_common_destroy_eq(sli4_t *sli4, void *buf, size_t size, uint16_t eq_id) 2047{ 2048 sli4_req_common_destroy_eq_t *eq = NULL; 2049 uint32_t sli_config_off = 0; 2050 2051 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2052 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2053 /* Payload length must accommodate both request and response */ 2054 max(sizeof(sli4_req_common_destroy_eq_t), 2055 sizeof(sli4_res_hdr_t)), 2056 NULL); 2057 } 2058 eq = (sli4_req_common_destroy_eq_t *)((uint8_t *)buf + sli_config_off); 2059 2060 eq->hdr.opcode = SLI4_OPC_COMMON_DESTROY_EQ; 2061 eq->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2062 eq->hdr.request_length = sizeof(sli4_req_common_destroy_eq_t) - 2063 sizeof(sli4_req_hdr_t); 2064 2065 eq->eq_id = eq_id; 2066 2067 return(sli_config_off + sizeof(sli4_req_common_destroy_eq_t)); 2068} 2069 2070/** 2071 * @brief Write a LOWLEVEL_SET_WATCHDOG command. 2072 * 2073 * @param sli4 SLI context. 2074 * @param buf Destination buffer for the command. 2075 * @param size Buffer size, in bytes. 2076 * @param timeout watchdog timer timeout in seconds 2077 * 2078 * @return void 2079 */ 2080void 2081sli4_cmd_lowlevel_set_watchdog(sli4_t *sli4, void *buf, size_t size, uint16_t timeout) 2082{ 2083 2084 sli4_req_lowlevel_set_watchdog_t *req = NULL; 2085 uint32_t sli_config_off = 0; 2086 2087 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2088 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2089 /* Payload length must accommodate both request and response */ 2090 max(sizeof(sli4_req_lowlevel_set_watchdog_t), 2091 sizeof(sli4_res_lowlevel_set_watchdog_t)), 2092 NULL); 2093 } 2094 req = (sli4_req_lowlevel_set_watchdog_t *)((uint8_t *)buf + sli_config_off); 2095 2096 req->hdr.opcode = SLI4_OPC_LOWLEVEL_SET_WATCHDOG; 2097 req->hdr.subsystem = SLI4_SUBSYSTEM_LOWLEVEL; 2098 req->hdr.request_length = sizeof(sli4_req_lowlevel_set_watchdog_t) - sizeof(sli4_req_hdr_t); 2099 req->watchdog_timeout = timeout; 2100 2101 return; 2102} 2103 2104static int32_t 2105sli_cmd_common_get_cntl_attributes(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma) 2106{ 2107 sli4_req_hdr_t *hdr = NULL; 2108 uint32_t sli_config_off = 0; 2109 2110 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2111 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2112 sizeof(sli4_req_hdr_t), 2113 dma); 2114 } 2115 2116 if (dma == NULL) { 2117 return 0; 2118 } 2119 2120 ocs_memset(dma->virt, 0, dma->size); 2121 2122 hdr = dma->virt; 2123 2124 hdr->opcode = SLI4_OPC_COMMON_GET_CNTL_ATTRIBUTES; 2125 hdr->subsystem = SLI4_SUBSYSTEM_COMMON; 2126 hdr->request_length = dma->size; 2127 2128 return(sli_config_off + sizeof(sli4_req_hdr_t)); 2129} 2130 2131/** 2132 * @brief Write a COMMON_GET_CNTL_ADDL_ATTRIBUTES command. 2133 * 2134 * @param sli4 SLI context. 2135 * @param buf Destination buffer for the command. 2136 * @param size Buffer size, in bytes. 2137 * @param dma DMA structure from which the data will be copied. 2138 * 2139 * @note This creates a Version 0 message. 2140 * 2141 * @return Returns the number of bytes written. 2142 */ 2143static int32_t 2144sli_cmd_common_get_cntl_addl_attributes(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma) 2145{ 2146 sli4_req_hdr_t *hdr = NULL; 2147 uint32_t sli_config_off = 0; 2148 2149 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2150 sli_config_off = sli_cmd_sli_config(sli4, buf, size, sizeof(sli4_req_hdr_t), dma); 2151 } 2152 2153 if (dma == NULL) { 2154 return 0; 2155 } 2156 2157 ocs_memset(dma->virt, 0, dma->size); 2158 2159 hdr = dma->virt; 2160 2161 hdr->opcode = SLI4_OPC_COMMON_GET_CNTL_ADDL_ATTRIBUTES; 2162 hdr->subsystem = SLI4_SUBSYSTEM_COMMON; 2163 hdr->request_length = dma->size; 2164 2165 return(sli_config_off + sizeof(sli4_req_hdr_t)); 2166} 2167 2168/** 2169 * @brief Write a COMMON_CREATE_MQ_EXT command. 2170 * 2171 * @param sli4 SLI context. 2172 * @param buf Destination buffer for the command. 2173 * @param size Buffer size, in bytes. 2174 * @param qmem DMA memory for the queue. 2175 * @param cq_id Associated CQ_ID. 2176 * @param ignored This parameter carries the ULP which is only used for WQ and RQs 2177 * 2178 * @note This creates a Version 0 message. 2179 * 2180 * @return Returns the number of bytes written. 2181 */ 2182static int32_t 2183sli_cmd_common_create_mq_ext(sli4_t *sli4, void *buf, size_t size, 2184 ocs_dma_t *qmem, uint16_t cq_id, uint16_t ignored) 2185{ 2186 sli4_req_common_create_mq_ext_t *mq = NULL; 2187 uint32_t sli_config_off = 0; 2188 uint32_t p; 2189 uintptr_t addr; 2190 2191 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2192 uint32_t payload_size; 2193 2194 /* Payload length must accommodate both request and response */ 2195 payload_size = max(sizeof(sli4_req_common_create_mq_ext_t), 2196 sizeof(sli4_res_common_create_queue_t)); 2197 2198 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 2199 NULL); 2200 } 2201 mq = (sli4_req_common_create_mq_ext_t *)((uint8_t *)buf + sli_config_off); 2202 2203 mq->hdr.opcode = SLI4_OPC_COMMON_CREATE_MQ_EXT; 2204 mq->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2205 mq->hdr.request_length = sizeof(sli4_req_common_create_mq_ext_t) - 2206 sizeof(sli4_req_hdr_t); 2207 /* valid values for number of pages: 1, 2, 4, 8 (sec 4.4.12) */ 2208 mq->num_pages = qmem->size / SLI_PAGE_SIZE; 2209 switch (mq->num_pages) { 2210 case 1: 2211 mq->ring_size = SLI4_MQE_SIZE_16; 2212 break; 2213 case 2: 2214 mq->ring_size = SLI4_MQE_SIZE_32; 2215 break; 2216 case 4: 2217 mq->ring_size = SLI4_MQE_SIZE_64; 2218 break; 2219 case 8: 2220 mq->ring_size = SLI4_MQE_SIZE_128; 2221 break; 2222 default: 2223 ocs_log_test(sli4->os, "num_pages %d not valid\n", mq->num_pages); 2224 return -1; 2225 } 2226 2227 /* TODO break this down by sli4->config.topology */ 2228 mq->async_event_bitmap = SLI4_ASYNC_EVT_FC_FCOE; 2229 2230 if (sli4->config.mq_create_version) { 2231 mq->cq_id_v1 = cq_id; 2232 mq->hdr.version = 1; 2233 } 2234 else { 2235 mq->cq_id_v0 = cq_id; 2236 } 2237 mq->val = TRUE; 2238 2239 for (p = 0, addr = qmem->phys; 2240 p < mq->num_pages; 2241 p++, addr += SLI_PAGE_SIZE) { 2242 mq->page_physical_address[p].low = ocs_addr32_lo(addr); 2243 mq->page_physical_address[p].high = ocs_addr32_hi(addr); 2244 } 2245 2246 return(sli_config_off + sizeof(sli4_req_common_create_mq_ext_t)); 2247} 2248 2249/** 2250 * @brief Write a COMMON_DESTROY_MQ command. 2251 * 2252 * @param sli4 SLI context. 2253 * @param buf Destination buffer for the command. 2254 * @param size Buffer size, in bytes. 2255 * @param mq_id MQ ID 2256 * 2257 * @note This creates a Version 0 message. 2258 * 2259 * @return Returns the number of bytes written. 2260 */ 2261static int32_t 2262sli_cmd_common_destroy_mq(sli4_t *sli4, void *buf, size_t size, uint16_t mq_id) 2263{ 2264 sli4_req_common_destroy_mq_t *mq = NULL; 2265 uint32_t sli_config_off = 0; 2266 2267 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2268 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2269 /* Payload length must accommodate both request and response */ 2270 max(sizeof(sli4_req_common_destroy_mq_t), 2271 sizeof(sli4_res_hdr_t)), 2272 NULL); 2273 } 2274 mq = (sli4_req_common_destroy_mq_t *)((uint8_t *)buf + sli_config_off); 2275 2276 mq->hdr.opcode = SLI4_OPC_COMMON_DESTROY_MQ; 2277 mq->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2278 mq->hdr.request_length = sizeof(sli4_req_common_destroy_mq_t) - 2279 sizeof(sli4_req_hdr_t); 2280 2281 mq->mq_id = mq_id; 2282 2283 return(sli_config_off + sizeof(sli4_req_common_destroy_mq_t)); 2284} 2285 2286/** 2287 * @ingroup sli 2288 * @brief Write a COMMON_NOP command 2289 * 2290 * @param sli4 SLI context. 2291 * @param buf Destination buffer for the command. 2292 * @param size Buffer size, in bytes. 2293 * @param context NOP context value (passed to response, except on FC/FCoE). 2294 * 2295 * @return Returns the number of bytes written. 2296 */ 2297int32_t 2298sli_cmd_common_nop(sli4_t *sli4, void *buf, size_t size, uint64_t context) 2299{ 2300 sli4_req_common_nop_t *nop = NULL; 2301 uint32_t sli_config_off = 0; 2302 2303 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2304 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2305 /* Payload length must accommodate both request and response */ 2306 max(sizeof(sli4_req_common_nop_t), sizeof(sli4_res_common_nop_t)), 2307 NULL); 2308 } 2309 2310 nop = (sli4_req_common_nop_t *)((uint8_t *)buf + sli_config_off); 2311 2312 nop->hdr.opcode = SLI4_OPC_COMMON_NOP; 2313 nop->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2314 nop->hdr.request_length = 8; 2315 2316 ocs_memcpy(&nop->context, &context, sizeof(context)); 2317 2318 return(sli_config_off + sizeof(sli4_req_common_nop_t)); 2319} 2320 2321/** 2322 * @ingroup sli 2323 * @brief Write a COMMON_GET_RESOURCE_EXTENT_INFO command. 2324 * 2325 * @param sli4 SLI context. 2326 * @param buf Destination buffer for the command. 2327 * @param size Buffer size, in bytes. 2328 * @param rtype Resource type (for example, XRI, VFI, VPI, and RPI). 2329 * 2330 * @return Returns the number of bytes written. 2331 */ 2332int32_t 2333sli_cmd_common_get_resource_extent_info(sli4_t *sli4, void *buf, size_t size, uint16_t rtype) 2334{ 2335 sli4_req_common_get_resource_extent_info_t *extent = NULL; 2336 uint32_t sli_config_off = 0; 2337 2338 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2339 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2340 sizeof(sli4_req_common_get_resource_extent_info_t), 2341 NULL); 2342 } 2343 2344 extent = (sli4_req_common_get_resource_extent_info_t *)((uint8_t *)buf + sli_config_off); 2345 2346 extent->hdr.opcode = SLI4_OPC_COMMON_GET_RESOURCE_EXTENT_INFO; 2347 extent->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2348 extent->hdr.request_length = 4; 2349 2350 extent->resource_type = rtype; 2351 2352 return(sli_config_off + sizeof(sli4_req_common_get_resource_extent_info_t)); 2353} 2354 2355/** 2356 * @ingroup sli 2357 * @brief Write a COMMON_GET_SLI4_PARAMETERS command. 2358 * 2359 * @param sli4 SLI context. 2360 * @param buf Destination buffer for the command. 2361 * @param size Buffer size, in bytes. 2362 * 2363 * @return Returns the number of bytes written. 2364 */ 2365int32_t 2366sli_cmd_common_get_sli4_parameters(sli4_t *sli4, void *buf, size_t size) 2367{ 2368 sli4_req_hdr_t *hdr = NULL; 2369 uint32_t sli_config_off = 0; 2370 2371 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2372 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2373 sizeof(sli4_res_common_get_sli4_parameters_t), 2374 NULL); 2375 } 2376 2377 hdr = (sli4_req_hdr_t *)((uint8_t *)buf + sli_config_off); 2378 2379 hdr->opcode = SLI4_OPC_COMMON_GET_SLI4_PARAMETERS; 2380 hdr->subsystem = SLI4_SUBSYSTEM_COMMON; 2381 hdr->request_length = 0x50; 2382 2383 return(sli_config_off + sizeof(sli4_req_hdr_t)); 2384} 2385 2386/** 2387 * @brief Write a COMMON_QUERY_FW_CONFIG command to the provided buffer. 2388 * 2389 * @param sli4 SLI context pointer. 2390 * @param buf Virtual pointer to destination buffer. 2391 * @param size Buffer size in bytes. 2392 * 2393 * @return Returns the number of bytes written 2394 */ 2395static int32_t 2396sli_cmd_common_query_fw_config(sli4_t *sli4, void *buf, size_t size) 2397{ 2398 sli4_req_common_query_fw_config_t *fw_config; 2399 uint32_t sli_config_off = 0; 2400 uint32_t payload_size; 2401 2402 /* Payload length must accommodate both request and response */ 2403 payload_size = max(sizeof(sli4_req_common_query_fw_config_t), 2404 sizeof(sli4_res_common_query_fw_config_t)); 2405 2406 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2407 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2408 payload_size, 2409 NULL); 2410 } 2411 2412 fw_config = (sli4_req_common_query_fw_config_t*)((uint8_t*)buf + sli_config_off); 2413 fw_config->hdr.opcode = SLI4_OPC_COMMON_QUERY_FW_CONFIG; 2414 fw_config->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2415 fw_config->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 2416 return sli_config_off + sizeof(sli4_req_common_query_fw_config_t); 2417} 2418 2419/** 2420 * @brief Write a COMMON_GET_PORT_NAME command to the provided buffer. 2421 * 2422 * @param sli4 SLI context pointer. 2423 * @param buf Virtual pointer to destination buffer. 2424 * @param size Buffer size in bytes. 2425 * 2426 * @note Function supports both version 0 and 1 forms of this command via 2427 * the IF_TYPE. 2428 * 2429 * @return Returns the number of bytes written. 2430 */ 2431static int32_t 2432sli_cmd_common_get_port_name(sli4_t *sli4, void *buf, size_t size) 2433{ 2434 sli4_req_common_get_port_name_t *port_name; 2435 uint32_t sli_config_off = 0; 2436 uint32_t payload_size; 2437 uint8_t version = 0; 2438 uint8_t pt = 0; 2439 2440 /* Select command version according to IF_TYPE */ 2441 switch (sli4->if_type) { 2442 case SLI4_IF_TYPE_BE3_SKH_PF: 2443 case SLI4_IF_TYPE_BE3_SKH_VF: 2444 version = 0; 2445 break; 2446 case SLI4_IF_TYPE_LANCER_FC_ETH: 2447 case SLI4_IF_TYPE_LANCER_RDMA: 2448 version = 1; 2449 break; 2450 default: 2451 ocs_log_test(sli4->os, "unsupported IF_TYPE %d\n", sli4->if_type); 2452 return 0; 2453 } 2454 2455 /* Payload length must accommodate both request and response */ 2456 payload_size = max(sizeof(sli4_req_common_get_port_name_t), 2457 sizeof(sli4_res_common_get_port_name_t)); 2458 2459 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2460 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2461 payload_size, 2462 NULL); 2463 2464 pt = 1; 2465 } 2466 2467 port_name = (sli4_req_common_get_port_name_t *)((uint8_t *)buf + sli_config_off); 2468 2469 port_name->hdr.opcode = SLI4_OPC_COMMON_GET_PORT_NAME; 2470 port_name->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2471 port_name->hdr.request_length = sizeof(sli4_req_hdr_t) + (version * sizeof(uint32_t)); 2472 port_name->hdr.version = version; 2473 2474 /* Set the port type value (ethernet=0, FC=1) for V1 commands */ 2475 if (version == 1) { 2476 port_name->pt = pt; 2477 } 2478 2479 return sli_config_off + port_name->hdr.request_length; 2480} 2481 2482/** 2483 * @ingroup sli 2484 * @brief Write a COMMON_WRITE_OBJECT command. 2485 * 2486 * @param sli4 SLI context. 2487 * @param buf Destination buffer for the command. 2488 * @param size Buffer size, in bytes. 2489 * @param noc True if the object should be written but not committed to flash. 2490 * @param eof True if this is the last write for this object. 2491 * @param desired_write_length Number of bytes of data to write to the object. 2492 * @param offset Offset, in bytes, from the start of the object. 2493 * @param object_name Name of the object to write. 2494 * @param dma DMA structure from which the data will be copied. 2495 * 2496 * @return Returns the number of bytes written. 2497 */ 2498int32_t 2499sli_cmd_common_write_object(sli4_t *sli4, void *buf, size_t size, 2500 uint16_t noc, uint16_t eof, uint32_t desired_write_length, 2501 uint32_t offset, 2502 char *object_name, 2503 ocs_dma_t *dma) 2504{ 2505 sli4_req_common_write_object_t *wr_obj = NULL; 2506 uint32_t sli_config_off = 0; 2507 sli4_bde_t *host_buffer; 2508 2509 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2510 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2511 sizeof (sli4_req_common_write_object_t) + sizeof (sli4_bde_t), 2512 NULL); 2513 } 2514 2515 wr_obj = (sli4_req_common_write_object_t *)((uint8_t *)buf + sli_config_off); 2516 2517 wr_obj->hdr.opcode = SLI4_OPC_COMMON_WRITE_OBJECT; 2518 wr_obj->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2519 wr_obj->hdr.request_length = sizeof(*wr_obj) - 4*sizeof(uint32_t) + sizeof(sli4_bde_t); 2520 wr_obj->hdr.timeout = 0; 2521 wr_obj->hdr.version = 0; 2522 2523 wr_obj->noc = noc; 2524 wr_obj->eof = eof; 2525 wr_obj->desired_write_length = desired_write_length; 2526 wr_obj->write_offset = offset; 2527 ocs_strncpy(wr_obj->object_name, object_name, sizeof(wr_obj->object_name)); 2528 wr_obj->host_buffer_descriptor_count = 1; 2529 2530 host_buffer = (sli4_bde_t *)wr_obj->host_buffer_descriptor; 2531 2532 /* Setup to transfer xfer_size bytes to device */ 2533 host_buffer->bde_type = SLI4_BDE_TYPE_BDE_64; 2534 host_buffer->buffer_length = desired_write_length; 2535 host_buffer->u.data.buffer_address_low = ocs_addr32_lo(dma->phys); 2536 host_buffer->u.data.buffer_address_high = ocs_addr32_hi(dma->phys); 2537 2538 return(sli_config_off + sizeof(sli4_req_common_write_object_t) + sizeof (sli4_bde_t)); 2539} 2540 2541/** 2542 * @ingroup sli 2543 * @brief Write a COMMON_DELETE_OBJECT command. 2544 * 2545 * @param sli4 SLI context. 2546 * @param buf Destination buffer for the command. 2547 * @param size Buffer size, in bytes. 2548 * @param object_name Name of the object to write. 2549 * 2550 * @return Returns the number of bytes written. 2551 */ 2552int32_t 2553sli_cmd_common_delete_object(sli4_t *sli4, void *buf, size_t size, 2554 char *object_name) 2555{ 2556 sli4_req_common_delete_object_t *del_obj = NULL; 2557 uint32_t sli_config_off = 0; 2558 2559 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2560 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2561 sizeof (sli4_req_common_delete_object_t), 2562 NULL); 2563 } 2564 2565 del_obj = (sli4_req_common_delete_object_t *)((uint8_t *)buf + sli_config_off); 2566 2567 del_obj->hdr.opcode = SLI4_OPC_COMMON_DELETE_OBJECT; 2568 del_obj->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2569 del_obj->hdr.request_length = sizeof(*del_obj); 2570 del_obj->hdr.timeout = 0; 2571 del_obj->hdr.version = 0; 2572 2573 ocs_strncpy(del_obj->object_name, object_name, sizeof(del_obj->object_name)); 2574 return(sli_config_off + sizeof(sli4_req_common_delete_object_t)); 2575} 2576 2577/** 2578 * @ingroup sli 2579 * @brief Write a COMMON_READ_OBJECT command. 2580 * 2581 * @param sli4 SLI context. 2582 * @param buf Destination buffer for the command. 2583 * @param size Buffer size, in bytes. 2584 * @param desired_read_length Number of bytes of data to read from the object. 2585 * @param offset Offset, in bytes, from the start of the object. 2586 * @param object_name Name of the object to read. 2587 * @param dma DMA structure from which the data will be copied. 2588 * 2589 * @return Returns the number of bytes written. 2590 */ 2591int32_t 2592sli_cmd_common_read_object(sli4_t *sli4, void *buf, size_t size, 2593 uint32_t desired_read_length, 2594 uint32_t offset, 2595 char *object_name, 2596 ocs_dma_t *dma) 2597{ 2598 sli4_req_common_read_object_t *rd_obj = NULL; 2599 uint32_t sli_config_off = 0; 2600 sli4_bde_t *host_buffer; 2601 2602 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2603 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2604 sizeof (sli4_req_common_read_object_t) + sizeof (sli4_bde_t), 2605 NULL); 2606 } 2607 2608 rd_obj = (sli4_req_common_read_object_t *)((uint8_t *)buf + sli_config_off); 2609 2610 rd_obj->hdr.opcode = SLI4_OPC_COMMON_READ_OBJECT; 2611 rd_obj->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2612 rd_obj->hdr.request_length = sizeof(*rd_obj) - 4*sizeof(uint32_t) + sizeof(sli4_bde_t); 2613 rd_obj->hdr.timeout = 0; 2614 rd_obj->hdr.version = 0; 2615 2616 rd_obj->desired_read_length = desired_read_length; 2617 rd_obj->read_offset = offset; 2618 ocs_strncpy(rd_obj->object_name, object_name, sizeof(rd_obj->object_name)); 2619 rd_obj->host_buffer_descriptor_count = 1; 2620 2621 host_buffer = (sli4_bde_t *)rd_obj->host_buffer_descriptor; 2622 2623 /* Setup to transfer xfer_size bytes to device */ 2624 host_buffer->bde_type = SLI4_BDE_TYPE_BDE_64; 2625 host_buffer->buffer_length = desired_read_length; 2626 if (dma != NULL) { 2627 host_buffer->u.data.buffer_address_low = ocs_addr32_lo(dma->phys); 2628 host_buffer->u.data.buffer_address_high = ocs_addr32_hi(dma->phys); 2629 } else { 2630 host_buffer->u.data.buffer_address_low = 0; 2631 host_buffer->u.data.buffer_address_high = 0; 2632 } 2633 2634 return(sli_config_off + sizeof(sli4_req_common_read_object_t) + sizeof (sli4_bde_t)); 2635} 2636 2637/** 2638 * @ingroup sli 2639 * @brief Write a DMTF_EXEC_CLP_CMD command. 2640 * 2641 * @param sli4 SLI context. 2642 * @param buf Destination buffer for the command. 2643 * @param size Buffer size, in bytes. 2644 * @param cmd DMA structure that describes the buffer for the command. 2645 * @param resp DMA structure that describes the buffer for the response. 2646 * 2647 * @return Returns the number of bytes written. 2648 */ 2649int32_t 2650sli_cmd_dmtf_exec_clp_cmd(sli4_t *sli4, void *buf, size_t size, 2651 ocs_dma_t *cmd, 2652 ocs_dma_t *resp) 2653{ 2654 sli4_req_dmtf_exec_clp_cmd_t *clp_cmd = NULL; 2655 uint32_t sli_config_off = 0; 2656 2657 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2658 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2659 sizeof (sli4_req_dmtf_exec_clp_cmd_t), 2660 NULL); 2661 } 2662 2663 clp_cmd = (sli4_req_dmtf_exec_clp_cmd_t*)((uint8_t *)buf + sli_config_off); 2664 2665 clp_cmd->hdr.opcode = SLI4_OPC_DMTF_EXEC_CLP_CMD; 2666 clp_cmd->hdr.subsystem = SLI4_SUBSYSTEM_DMTF; 2667 clp_cmd->hdr.request_length = sizeof(sli4_req_dmtf_exec_clp_cmd_t) - 2668 sizeof(sli4_req_hdr_t); 2669 clp_cmd->hdr.timeout = 0; 2670 clp_cmd->hdr.version = 0; 2671 clp_cmd->cmd_buf_length = cmd->size; 2672 clp_cmd->cmd_buf_addr_low = ocs_addr32_lo(cmd->phys); 2673 clp_cmd->cmd_buf_addr_high = ocs_addr32_hi(cmd->phys); 2674 clp_cmd->resp_buf_length = resp->size; 2675 clp_cmd->resp_buf_addr_low = ocs_addr32_lo(resp->phys); 2676 clp_cmd->resp_buf_addr_high = ocs_addr32_hi(resp->phys); 2677 2678 return(sli_config_off + sizeof(sli4_req_dmtf_exec_clp_cmd_t)); 2679} 2680 2681/** 2682 * @ingroup sli 2683 * @brief Write a COMMON_SET_DUMP_LOCATION command. 2684 * 2685 * @param sli4 SLI context. 2686 * @param buf Destination buffer for the command. 2687 * @param size Buffer size, in bytes. 2688 * @param query Zero to set dump location, non-zero to query dump size 2689 * @param is_buffer_list Set to one if the buffer is a set of buffer descriptors or 2690 * set to 0 if the buffer is a contiguous dump area. 2691 * @param buffer DMA structure to which the dump will be copied. 2692 * 2693 * @return Returns the number of bytes written. 2694 */ 2695int32_t 2696sli_cmd_common_set_dump_location(sli4_t *sli4, void *buf, size_t size, 2697 uint8_t query, uint8_t is_buffer_list, 2698 ocs_dma_t *buffer, uint8_t fdb) 2699{ 2700 sli4_req_common_set_dump_location_t *set_dump_loc = NULL; 2701 uint32_t sli_config_off = 0; 2702 2703 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2704 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2705 sizeof (sli4_req_common_set_dump_location_t), 2706 NULL); 2707 } 2708 2709 set_dump_loc = (sli4_req_common_set_dump_location_t *)((uint8_t *)buf + sli_config_off); 2710 2711 set_dump_loc->hdr.opcode = SLI4_OPC_COMMON_SET_DUMP_LOCATION; 2712 set_dump_loc->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2713 set_dump_loc->hdr.request_length = sizeof(sli4_req_common_set_dump_location_t) - sizeof(sli4_req_hdr_t); 2714 set_dump_loc->hdr.timeout = 0; 2715 set_dump_loc->hdr.version = 0; 2716 2717 set_dump_loc->blp = is_buffer_list; 2718 set_dump_loc->qry = query; 2719 set_dump_loc->fdb = fdb; 2720 2721 if (buffer) { 2722 set_dump_loc->buf_addr_low = ocs_addr32_lo(buffer->phys); 2723 set_dump_loc->buf_addr_high = ocs_addr32_hi(buffer->phys); 2724 set_dump_loc->buffer_length = buffer->len; 2725 } else { 2726 set_dump_loc->buf_addr_low = 0; 2727 set_dump_loc->buf_addr_high = 0; 2728 set_dump_loc->buffer_length = 0; 2729 } 2730 2731 return(sli_config_off + sizeof(sli4_req_common_set_dump_location_t)); 2732} 2733 2734/** 2735 * @ingroup sli 2736 * @brief Write a COMMON_SET_FEATURES command. 2737 * 2738 * @param sli4 SLI context. 2739 * @param buf Destination buffer for the command. 2740 * @param size Buffer size, in bytes. 2741 * @param feature Feature to set. 2742 * @param param_len Length of the parameter (must be a multiple of 4 bytes). 2743 * @param parameter Pointer to the parameter value. 2744 * 2745 * @return Returns the number of bytes written. 2746 */ 2747int32_t 2748sli_cmd_common_set_features(sli4_t *sli4, void *buf, size_t size, 2749 uint32_t feature, 2750 uint32_t param_len, 2751 void* parameter) 2752{ 2753 sli4_req_common_set_features_t *cmd = NULL; 2754 uint32_t sli_config_off = 0; 2755 2756 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2757 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2758 sizeof (sli4_req_common_set_features_t), 2759 NULL); 2760 } 2761 2762 cmd = (sli4_req_common_set_features_t *)((uint8_t *)buf + sli_config_off); 2763 2764 cmd->hdr.opcode = SLI4_OPC_COMMON_SET_FEATURES; 2765 cmd->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2766 cmd->hdr.request_length = sizeof(sli4_req_common_set_features_t) - sizeof(sli4_req_hdr_t); 2767 cmd->hdr.timeout = 0; 2768 cmd->hdr.version = 0; 2769 2770 cmd->feature = feature; 2771 cmd->param_len = param_len; 2772 ocs_memcpy(cmd->params, parameter, param_len); 2773 2774 return(sli_config_off + sizeof(sli4_req_common_set_features_t)); 2775} 2776 2777/** 2778 * @ingroup sli 2779 * @brief Write a COMMON_COMMON_GET_PROFILE_CONFIG command. 2780 * 2781 * @param sli4 SLI context. 2782 * @param buf Destination buffer for the command. 2783 * @param size Buffer size in bytes. 2784 * @param dma DMA capable memory used to retrieve profile. 2785 * 2786 * @return Returns the number of bytes written. 2787 */ 2788int32_t 2789sli_cmd_common_get_profile_config(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma) 2790{ 2791 sli4_req_common_get_profile_config_t *req = NULL; 2792 uint32_t sli_config_off = 0; 2793 uint32_t payload_size; 2794 2795 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2796 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 2797 sizeof (sli4_req_common_get_profile_config_t), 2798 dma); 2799 } 2800 2801 if (dma != NULL) { 2802 req = dma->virt; 2803 ocs_memset(req, 0, dma->size); 2804 payload_size = dma->size; 2805 } else { 2806 req = (sli4_req_common_get_profile_config_t *)((uint8_t *)buf + sli_config_off); 2807 payload_size = sizeof(sli4_req_common_get_profile_config_t); 2808 } 2809 2810 req->hdr.opcode = SLI4_OPC_COMMON_GET_PROFILE_CONFIG; 2811 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2812 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 2813 req->hdr.version = 1; 2814 2815 return(sli_config_off + sizeof(sli4_req_common_get_profile_config_t)); 2816} 2817 2818/** 2819 * @ingroup sli 2820 * @brief Write a COMMON_COMMON_SET_PROFILE_CONFIG command. 2821 * 2822 * @param sli4 SLI context. 2823 * @param buf Destination buffer for the command. 2824 * @param size Buffer size, in bytes. 2825 * @param dma DMA capable memory containing profile. 2826 * @param profile_id Profile ID to configure. 2827 * @param descriptor_count Number of descriptors in DMA buffer. 2828 * @param isap Implicit Set Active Profile value to use. 2829 * 2830 * @return Returns the number of bytes written. 2831 */ 2832int32_t 2833sli_cmd_common_set_profile_config(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma, 2834 uint8_t profile_id, uint32_t descriptor_count, uint8_t isap) 2835{ 2836 sli4_req_common_set_profile_config_t *req = NULL; 2837 uint32_t cmd_off = 0; 2838 uint32_t payload_size; 2839 2840 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2841 cmd_off = sli_cmd_sli_config(sli4, buf, size, 2842 sizeof (sli4_req_common_set_profile_config_t), 2843 dma); 2844 } 2845 2846 if (dma != NULL) { 2847 req = dma->virt; 2848 ocs_memset(req, 0, dma->size); 2849 payload_size = dma->size; 2850 } else { 2851 req = (sli4_req_common_set_profile_config_t *)((uint8_t *)buf + cmd_off); 2852 payload_size = sizeof(sli4_req_common_set_profile_config_t); 2853 } 2854 2855 req->hdr.opcode = SLI4_OPC_COMMON_SET_PROFILE_CONFIG; 2856 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2857 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 2858 req->hdr.version = 1; 2859 req->profile_id = profile_id; 2860 req->desc_count = descriptor_count; 2861 req->isap = isap; 2862 2863 return(cmd_off + sizeof(sli4_req_common_set_profile_config_t)); 2864} 2865 2866/** 2867 * @ingroup sli 2868 * @brief Write a COMMON_COMMON_GET_PROFILE_LIST command. 2869 * 2870 * @param sli4 SLI context. 2871 * @param buf Destination buffer for the command. 2872 * @param size Buffer size in bytes. 2873 * @param start_profile_index First profile index to return. 2874 * @param dma Buffer into which the list will be written. 2875 * 2876 * @return Returns the number of bytes written. 2877 */ 2878int32_t 2879sli_cmd_common_get_profile_list(sli4_t *sli4, void *buf, size_t size, 2880 uint32_t start_profile_index, ocs_dma_t *dma) 2881{ 2882 sli4_req_common_get_profile_list_t *req = NULL; 2883 uint32_t cmd_off = 0; 2884 uint32_t payload_size; 2885 2886 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2887 cmd_off = sli_cmd_sli_config(sli4, buf, size, 2888 sizeof (sli4_req_common_get_profile_list_t), 2889 dma); 2890 } 2891 2892 if (dma != NULL) { 2893 req = dma->virt; 2894 ocs_memset(req, 0, dma->size); 2895 payload_size = dma->size; 2896 } else { 2897 req = (sli4_req_common_get_profile_list_t *)((uint8_t *)buf + cmd_off); 2898 payload_size = sizeof(sli4_req_common_get_profile_list_t); 2899 } 2900 2901 req->hdr.opcode = SLI4_OPC_COMMON_GET_PROFILE_LIST; 2902 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2903 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 2904 req->hdr.version = 0; 2905 2906 req->start_profile_index = start_profile_index; 2907 2908 return(cmd_off + sizeof(sli4_req_common_get_profile_list_t)); 2909} 2910 2911/** 2912 * @ingroup sli 2913 * @brief Write a COMMON_COMMON_GET_ACTIVE_PROFILE command. 2914 * 2915 * @param sli4 SLI context. 2916 * @param buf Destination buffer for the command. 2917 * @param size Buffer size in bytes. 2918 * 2919 * @return Returns the number of bytes written. 2920 */ 2921int32_t 2922sli_cmd_common_get_active_profile(sli4_t *sli4, void *buf, size_t size) 2923{ 2924 sli4_req_common_get_active_profile_t *req = NULL; 2925 uint32_t cmd_off = 0; 2926 uint32_t payload_size; 2927 2928 /* Payload length must accommodate both request and response */ 2929 payload_size = max(sizeof(sli4_req_common_get_active_profile_t), 2930 sizeof(sli4_res_common_get_active_profile_t)); 2931 2932 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2933 cmd_off = sli_cmd_sli_config(sli4, buf, size, 2934 payload_size, 2935 NULL); 2936 } 2937 2938 req = (sli4_req_common_get_active_profile_t *) 2939 ((uint8_t*)buf + cmd_off); 2940 2941 req->hdr.opcode = SLI4_OPC_COMMON_GET_ACTIVE_PROFILE; 2942 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2943 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 2944 req->hdr.version = 0; 2945 2946 return(cmd_off + sizeof(sli4_req_common_get_active_profile_t)); 2947} 2948 2949/** 2950 * @ingroup sli 2951 * @brief Write a COMMON_COMMON_SET_ACTIVE_PROFILE command. 2952 * 2953 * @param sli4 SLI context. 2954 * @param buf Destination buffer for the command. 2955 * @param size Buffer size in bytes. 2956 * @param fd If non-zero, set profile to factory default. 2957 * @param active_profile_id ID of new active profile. 2958 * 2959 * @return Returns the number of bytes written. 2960 */ 2961int32_t 2962sli_cmd_common_set_active_profile(sli4_t *sli4, void *buf, size_t size, 2963 uint32_t fd, uint32_t active_profile_id) 2964{ 2965 sli4_req_common_set_active_profile_t *req = NULL; 2966 uint32_t cmd_off = 0; 2967 uint32_t payload_size; 2968 2969 /* Payload length must accommodate both request and response */ 2970 payload_size = max(sizeof(sli4_req_common_set_active_profile_t), 2971 sizeof(sli4_res_common_set_active_profile_t)); 2972 2973 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 2974 cmd_off = sli_cmd_sli_config(sli4, buf, size, 2975 payload_size, 2976 NULL); 2977 } 2978 2979 req = (sli4_req_common_set_active_profile_t *) 2980 ((uint8_t*)buf + cmd_off); 2981 2982 req->hdr.opcode = SLI4_OPC_COMMON_SET_ACTIVE_PROFILE; 2983 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 2984 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 2985 req->hdr.version = 0; 2986 req->fd = fd; 2987 req->active_profile_id = active_profile_id; 2988 2989 return(cmd_off + sizeof(sli4_req_common_set_active_profile_t)); 2990} 2991 2992/** 2993 * @ingroup sli 2994 * @brief Write a COMMON_GET_RECONFIG_LINK_INFO command. 2995 * 2996 * @param sli4 SLI context. 2997 * @param buf Destination buffer for the command. 2998 * @param size Buffer size in bytes. 2999 * @param dma Buffer to store the supported link configuration modes from the physical device. 3000 * 3001 * @return Returns the number of bytes written. 3002 */ 3003int32_t 3004sli_cmd_common_get_reconfig_link_info(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma) 3005{ 3006 sli4_req_common_get_reconfig_link_info_t *req = NULL; 3007 uint32_t cmd_off = 0; 3008 uint32_t payload_size; 3009 3010 /* Payload length must accommodate both request and response */ 3011 payload_size = max(sizeof(sli4_req_common_get_reconfig_link_info_t), 3012 sizeof(sli4_res_common_get_reconfig_link_info_t)); 3013 3014 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 3015 cmd_off = sli_cmd_sli_config(sli4, buf, size, 3016 payload_size, 3017 dma); 3018 } 3019 3020 if (dma != NULL) { 3021 req = dma->virt; 3022 ocs_memset(req, 0, dma->size); 3023 payload_size = dma->size; 3024 } else { 3025 req = (sli4_req_common_get_reconfig_link_info_t *)((uint8_t *)buf + cmd_off); 3026 payload_size = sizeof(sli4_req_common_get_reconfig_link_info_t); 3027 } 3028 3029 req->hdr.opcode = SLI4_OPC_COMMON_GET_RECONFIG_LINK_INFO; 3030 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 3031 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 3032 req->hdr.version = 0; 3033 3034 return(cmd_off + sizeof(sli4_req_common_get_reconfig_link_info_t)); 3035} 3036 3037/** 3038 * @ingroup sli 3039 * @brief Write a COMMON_SET_RECONFIG_LINK_ID command. 3040 * 3041 * @param sli4 SLI context. 3042 * @param buf destination buffer for the command. 3043 * @param size buffer size in bytes. 3044 * @param fd If non-zero, set link config to factory default. 3045 * @param active_link_config_id ID of new active profile. 3046 * @param dma Buffer to assign the link configuration mode that is to become active from the physical device. 3047 * 3048 * @return Returns the number of bytes written. 3049 */ 3050int32_t 3051sli_cmd_common_set_reconfig_link_id(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma, 3052 uint32_t fd, uint32_t active_link_config_id) 3053{ 3054 sli4_req_common_set_reconfig_link_id_t *req = NULL; 3055 uint32_t cmd_off = 0; 3056 uint32_t payload_size; 3057 3058 /* Payload length must accommodate both request and response */ 3059 payload_size = max(sizeof(sli4_req_common_set_reconfig_link_id_t), 3060 sizeof(sli4_res_common_set_reconfig_link_id_t)); 3061 3062 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 3063 cmd_off = sli_cmd_sli_config(sli4, buf, size, 3064 payload_size, 3065 NULL); 3066 } 3067 3068 if (dma != NULL) { 3069 req = dma->virt; 3070 ocs_memset(req, 0, dma->size); 3071 payload_size = dma->size; 3072 } else { 3073 req = (sli4_req_common_set_reconfig_link_id_t *)((uint8_t *)buf + cmd_off); 3074 payload_size = sizeof(sli4_req_common_set_reconfig_link_id_t); 3075 } 3076 3077 req->hdr.opcode = SLI4_OPC_COMMON_SET_RECONFIG_LINK_ID; 3078 req->hdr.subsystem = SLI4_SUBSYSTEM_COMMON; 3079 req->hdr.request_length = payload_size - sizeof(sli4_req_hdr_t); 3080 req->hdr.version = 0; 3081 req->fd = fd; 3082 req->next_link_config_id = active_link_config_id; 3083 3084 return(cmd_off + sizeof(sli4_req_common_set_reconfig_link_id_t)); 3085} 3086 3087/** 3088 * @ingroup sli 3089 * @brief Check the mailbox/queue completion entry. 3090 * 3091 * @param buf Pointer to the MCQE. 3092 * 3093 * @return Returns 0 on success, or a non-zero value on failure. 3094 */ 3095int32_t 3096sli_cqe_mq(void *buf) 3097{ 3098 sli4_mcqe_t *mcqe = buf; 3099 3100 /* 3101 * Firmware can split mbx completions into two MCQEs: first with only 3102 * the "consumed" bit set and a second with the "complete" bit set. 3103 * Thus, ignore MCQE unless "complete" is set. 3104 */ 3105 if (!mcqe->cmp) { 3106 return -2; 3107 } 3108 3109 if (mcqe->completion_status) { 3110 ocs_log_debug(NULL, "bad status (cmpl=%#x ext=%#x con=%d cmp=%d ae=%d val=%d)\n", 3111 mcqe->completion_status, 3112 mcqe->extended_status, 3113 mcqe->con, 3114 mcqe->cmp, 3115 mcqe->ae, 3116 mcqe->val); 3117 } 3118 3119 return mcqe->completion_status; 3120} 3121 3122/** 3123 * @ingroup sli 3124 * @brief Check the asynchronous event completion entry. 3125 * 3126 * @param sli4 SLI context. 3127 * @param buf Pointer to the ACQE. 3128 * 3129 * @return Returns 0 on success, or a non-zero value on failure. 3130 */ 3131int32_t 3132sli_cqe_async(sli4_t *sli4, void *buf) 3133{ 3134 sli4_acqe_t *acqe = buf; 3135 int32_t rc = -1; 3136 3137 if (!sli4 || !buf) { 3138 ocs_log_err(NULL, "bad parameter sli4=%p buf=%p\n", sli4, buf); 3139 return -1; 3140 } 3141 3142 switch (acqe->event_code) { 3143 case SLI4_ACQE_EVENT_CODE_LINK_STATE: 3144 rc = sli_fc_process_link_state(sli4, buf); 3145 break; 3146 case SLI4_ACQE_EVENT_CODE_FCOE_FIP: 3147 rc = sli_fc_process_fcoe(sli4, buf); 3148 break; 3149 case SLI4_ACQE_EVENT_CODE_GRP_5: 3150 /*TODO*/ocs_log_debug(sli4->os, "ACQE GRP5\n"); 3151 break; 3152 case SLI4_ACQE_EVENT_CODE_SLI_PORT_EVENT: 3153 ocs_log_debug(sli4->os,"ACQE SLI Port, type=0x%x, data1,2=0x%08x,0x%08x\n", 3154 acqe->event_type, acqe->event_data[0], acqe->event_data[1]); 3155#if defined(OCS_INCLUDE_DEBUG) 3156 ocs_dump32(OCS_DEBUG_ALWAYS, sli4->os, "acq", acqe, sizeof(*acqe)); 3157#endif 3158 break; 3159 case SLI4_ACQE_EVENT_CODE_FC_LINK_EVENT: 3160 rc = sli_fc_process_link_attention(sli4, buf); 3161 break; 3162 default: 3163 /*TODO*/ocs_log_test(sli4->os, "ACQE unknown=%#x\n", acqe->event_code); 3164 } 3165 3166 return rc; 3167} 3168 3169/** 3170 * @brief Check the SLI_CONFIG response. 3171 * 3172 * @par Description 3173 * Function checks the SLI_CONFIG response and the payload status. 3174 * 3175 * @param buf Pointer to SLI_CONFIG response. 3176 * 3177 * @return Returns 0 on success, or a non-zero value on failure. 3178 */ 3179static int32_t 3180sli_res_sli_config(void *buf) 3181{ 3182 sli4_cmd_sli_config_t *sli_config = buf; 3183 3184 if (!buf || (SLI4_MBOX_COMMAND_SLI_CONFIG != sli_config->hdr.command)) { 3185 ocs_log_err(NULL, "bad parameter buf=%p cmd=%#x\n", buf, 3186 buf ? sli_config->hdr.command : -1); 3187 return -1; 3188 } 3189 3190 if (sli_config->hdr.status) { 3191 return sli_config->hdr.status; 3192 } 3193 3194 if (sli_config->emb) { 3195 return sli_config->payload.embed[4]; 3196 } else { 3197 ocs_log_test(NULL, "external buffers not supported\n"); 3198 return -1; 3199 } 3200} 3201 3202/** 3203 * @brief Issue a COMMON_FUNCTION_RESET command. 3204 * 3205 * @param sli4 SLI context. 3206 * 3207 * @return Returns 0 on success, or a non-zero value on failure. 3208 */ 3209static int32_t 3210sli_common_function_reset(sli4_t *sli4) 3211{ 3212 3213 if (sli_cmd_common_function_reset(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3214 if (sli_bmbx_command(sli4)) { 3215 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (COM_FUNC_RESET)\n"); 3216 return -1; 3217 } 3218 if (sli_res_sli_config(sli4->bmbx.virt)) { 3219 ocs_log_err(sli4->os, "bad status COM_FUNC_RESET\n"); 3220 return -1; 3221 } 3222 } else { 3223 ocs_log_err(sli4->os, "bad COM_FUNC_RESET write\n"); 3224 return -1; 3225 } 3226 3227 return 0; 3228} 3229 3230/** 3231 * @brief check to see if the FW is ready. 3232 * 3233 * @par Description 3234 * Based on <i>SLI-4 Architecture Specification, Revision 4.x0-13 (2012).</i>. 3235 * 3236 * @param sli4 SLI context. 3237 * @param timeout_ms Time, in milliseconds, to wait for the port to be ready 3238 * before failing. 3239 * 3240 * @return Returns TRUE for ready, or FALSE otherwise. 3241 */ 3242static int32_t 3243sli_wait_for_fw_ready(sli4_t *sli4, uint32_t timeout_ms) 3244{ 3245 uint32_t iter = timeout_ms / (SLI4_INIT_PORT_DELAY_US / 1000); 3246 uint32_t ready = FALSE; 3247 3248 do { 3249 iter--; 3250 ocs_udelay(SLI4_INIT_PORT_DELAY_US); 3251 if (sli_fw_ready(sli4) == 1) { 3252 ready = TRUE; 3253 } 3254 } while (!ready && (iter > 0)); 3255 3256 return ready; 3257} 3258 3259/** 3260 * @brief Initialize the firmware. 3261 * 3262 * @par Description 3263 * Based on <i>SLI-4 Architecture Specification, Revision 4.x0-13 (2012).</i>. 3264 * 3265 * @param sli4 SLI context. 3266 * 3267 * @return Returns 0 on success, or a non-zero value on failure. 3268 */ 3269static int32_t 3270sli_fw_init(sli4_t *sli4) 3271{ 3272 uint32_t ready; 3273 uint32_t endian; 3274 3275 /* 3276 * Is firmware ready for operation? 3277 */ 3278 ready = sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC); 3279 if (!ready) { 3280 ocs_log_crit(sli4->os, "FW status is NOT ready\n"); 3281 return -1; 3282 } 3283 3284 /* 3285 * Reset port to a known state 3286 */ 3287 switch (sli4->if_type) { 3288 case SLI4_IF_TYPE_BE3_SKH_PF: 3289 case SLI4_IF_TYPE_BE3_SKH_VF: 3290 /* No SLIPORT_CONTROL register so use command sequence instead */ 3291 if (sli_bmbx_wait(sli4, SLI4_BMBX_DELAY_US)) { 3292 ocs_log_crit(sli4->os, "bootstrap mailbox not ready\n"); 3293 return -1; 3294 } 3295 3296 if (sli_cmd_fw_initialize(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3297 if (sli_bmbx_command(sli4)) { 3298 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (FW_INIT)\n"); 3299 return -1; 3300 } 3301 } else { 3302 ocs_log_crit(sli4->os, "bad FW_INIT write\n"); 3303 return -1; 3304 } 3305 3306 if (sli_common_function_reset(sli4)) { 3307 ocs_log_err(sli4->os, "bad COM_FUNC_RESET write\n"); 3308 return -1; 3309 } 3310 break; 3311 case SLI4_IF_TYPE_LANCER_FC_ETH: 3312#if BYTE_ORDER == LITTLE_ENDIAN 3313 endian = SLI4_SLIPORT_CONTROL_LITTLE_ENDIAN; 3314#else 3315 endian = SLI4_SLIPORT_CONTROL_BIG_ENDIAN; 3316#endif 3317 3318 if (sli_sliport_control(sli4, endian)) 3319 return -1; 3320 break; 3321 default: 3322 ocs_log_test(sli4->os, "if_type %d not supported\n", sli4->if_type); 3323 return -1; 3324 } 3325 3326 return 0; 3327} 3328 3329/** 3330 * @brief Terminate the firmware. 3331 * 3332 * @param sli4 SLI context. 3333 * 3334 * @return Returns 0 on success, or a non-zero value on failure. 3335 */ 3336static int32_t 3337sli_fw_term(sli4_t *sli4) 3338{ 3339 uint32_t endian; 3340 3341 if (sli4->if_type == SLI4_IF_TYPE_BE3_SKH_PF || 3342 sli4->if_type == SLI4_IF_TYPE_BE3_SKH_VF) { 3343 /* No SLIPORT_CONTROL register so use command sequence instead */ 3344 if (sli_bmbx_wait(sli4, SLI4_BMBX_DELAY_US)) { 3345 ocs_log_crit(sli4->os, "bootstrap mailbox not ready\n"); 3346 return -1; 3347 } 3348 3349 if (sli_common_function_reset(sli4)) { 3350 ocs_log_err(sli4->os, "bad COM_FUNC_RESET write\n"); 3351 return -1; 3352 } 3353 3354 if (sli_cmd_fw_deinitialize(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3355 if (sli_bmbx_command(sli4)) { 3356 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (FW_DEINIT)\n"); 3357 return -1; 3358 } 3359 } else { 3360 ocs_log_test(sli4->os, "bad FW_DEINIT write\n"); 3361 return -1; 3362 } 3363 } else { 3364#if BYTE_ORDER == LITTLE_ENDIAN 3365 endian = SLI4_SLIPORT_CONTROL_LITTLE_ENDIAN; 3366#else 3367 endian = SLI4_SLIPORT_CONTROL_BIG_ENDIAN; 3368#endif 3369 /* type 2 etc. use SLIPORT_CONTROL to initialize port */ 3370 sli_sliport_control(sli4, endian); 3371 } 3372 return 0; 3373} 3374 3375/** 3376 * @brief Write the doorbell register associated with the queue object. 3377 * 3378 * @param sli4 SLI context. 3379 * @param q Queue object. 3380 * 3381 * @return Returns 0 on success, or a non-zero value on failure. 3382 */ 3383static int32_t 3384sli_queue_doorbell(sli4_t *sli4, sli4_queue_t *q) 3385{ 3386 uint32_t val = 0; 3387 3388 switch (q->type) { 3389 case SLI_QTYPE_EQ: 3390 val = sli_eq_doorbell(q->n_posted, q->id, FALSE); 3391 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 3392 break; 3393 case SLI_QTYPE_CQ: 3394 val = sli_cq_doorbell(q->n_posted, q->id, FALSE); 3395 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 3396 break; 3397 case SLI_QTYPE_MQ: 3398 val = SLI4_MQ_DOORBELL(q->n_posted, q->id); 3399 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 3400 break; 3401 case SLI_QTYPE_RQ: 3402 { 3403 uint32_t n_posted = q->n_posted; 3404 /* 3405 * FC/FCoE has different rules for Receive Queues. The host 3406 * should only update the doorbell of the RQ-pair containing 3407 * the headers since the header / payload RQs are treated 3408 * as a matched unit. 3409 */ 3410 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 3411 /* 3412 * In RQ-pair, an RQ either contains the FC header 3413 * (i.e. is_hdr == TRUE) or the payload. 3414 * 3415 * Don't ring doorbell for payload RQ 3416 */ 3417 if (!q->u.flag.is_hdr) { 3418 break; 3419 } 3420 /* 3421 * Some RQ cannot be incremented one entry at a time. Instead, 3422 * the driver collects a number of entries and updates the 3423 * RQ in batches. 3424 */ 3425 if (q->u.flag.rq_batch) { 3426 if (((q->index + q->n_posted) % SLI4_QUEUE_RQ_BATCH)) { 3427 break; 3428 } 3429 n_posted = SLI4_QUEUE_RQ_BATCH; 3430 } 3431 } 3432 3433 val = SLI4_RQ_DOORBELL(n_posted, q->id); 3434 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 3435 break; 3436 } 3437 case SLI_QTYPE_WQ: 3438 val = SLI4_WQ_DOORBELL(q->n_posted, q->index, q->id); 3439 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 3440 break; 3441 default: 3442 ocs_log_test(sli4->os, "bad queue type %d\n", q->type); 3443 return -1; 3444 } 3445 3446 return 0; 3447} 3448 3449static int32_t 3450sli_request_features(sli4_t *sli4, sli4_features_t *features, uint8_t query) 3451{ 3452 3453 if (sli_cmd_request_features(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, 3454 *features, query)) { 3455 sli4_cmd_request_features_t *req_features = sli4->bmbx.virt; 3456 3457 if (sli_bmbx_command(sli4)) { 3458 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (REQUEST_FEATURES)\n"); 3459 return -1; 3460 } 3461 if (req_features->hdr.status) { 3462 ocs_log_err(sli4->os, "REQUEST_FEATURES bad status %#x\n", 3463 req_features->hdr.status); 3464 return -1; 3465 } 3466 features->dword = req_features->response.dword; 3467 } else { 3468 ocs_log_err(sli4->os, "bad REQUEST_FEATURES write\n"); 3469 return -1; 3470 } 3471 3472 return 0; 3473} 3474 3475/** 3476 * @brief Calculate max queue entries. 3477 * 3478 * @param sli4 SLI context. 3479 * 3480 * @return Returns 0 on success, or a non-zero value on failure. 3481 */ 3482void 3483sli_calc_max_qentries(sli4_t *sli4) 3484{ 3485 sli4_qtype_e q; 3486 uint32_t alloc_size, qentries, qentry_size; 3487 3488 for (q = SLI_QTYPE_EQ; q < SLI_QTYPE_MAX; q++) { 3489 sli4->config.max_qentries[q] = sli_convert_mask_to_count(sli4->config.count_method[q], 3490 sli4->config.count_mask[q]); 3491 } 3492 3493 /* single, continguous DMA allocations will be called for each queue 3494 * of size (max_qentries * queue entry size); since these can be large, 3495 * check against the OS max DMA allocation size 3496 */ 3497 for (q = SLI_QTYPE_EQ; q < SLI_QTYPE_MAX; q++) { 3498 qentries = sli4->config.max_qentries[q]; 3499 qentry_size = sli_get_queue_entry_size(sli4, q); 3500 alloc_size = qentries * qentry_size; 3501 if (alloc_size > ocs_max_dma_alloc(sli4->os, SLI_PAGE_SIZE)) { 3502 while (alloc_size > ocs_max_dma_alloc(sli4->os, SLI_PAGE_SIZE)) { 3503 /* cut the qentries in hwf until alloc_size <= max DMA alloc size */ 3504 qentries >>= 1; 3505 alloc_size = qentries * qentry_size; 3506 } 3507 ocs_log_debug(sli4->os, "[%s]: max_qentries from %d to %d (max dma %d)\n", 3508 SLI_QNAME[q], sli4->config.max_qentries[q], 3509 qentries, ocs_max_dma_alloc(sli4->os, SLI_PAGE_SIZE)); 3510 sli4->config.max_qentries[q] = qentries; 3511 } 3512 } 3513} 3514 3515/** 3516 * @brief Issue a FW_CONFIG mailbox command and store the results. 3517 * 3518 * @param sli4 SLI context. 3519 * 3520 * @return Returns 0 on success, or a non-zero value on failure. 3521 */ 3522static int32_t 3523sli_query_fw_config(sli4_t *sli4) 3524{ 3525 /* 3526 * Read the device configuration 3527 * 3528 * Note: Only ulp0 fields contain values 3529 */ 3530 if (sli_cmd_common_query_fw_config(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3531 sli4_res_common_query_fw_config_t *fw_config = 3532 (sli4_res_common_query_fw_config_t *) 3533 (((uint8_t *)sli4->bmbx.virt) + offsetof(sli4_cmd_sli_config_t, payload.embed)); 3534 3535 if (sli_bmbx_command(sli4)) { 3536 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (QUERY_FW_CONFIG)\n"); 3537 return -1; 3538 } 3539 if (fw_config->hdr.status) { 3540 ocs_log_err(sli4->os, "COMMON_QUERY_FW_CONFIG bad status %#x\n", 3541 fw_config->hdr.status); 3542 return -1; 3543 } 3544 3545 sli4->physical_port = fw_config->physical_port; 3546 sli4->config.dual_ulp_capable = ((fw_config->function_mode & SLI4_FUNCTION_MODE_DUA_MODE) == 0 ? 0 : 1); 3547 sli4->config.is_ulp_fc[0] = ((fw_config->ulp0_mode & 3548 (SLI4_ULP_MODE_FCOE_INI | 3549 SLI4_ULP_MODE_FCOE_TGT)) == 0 ? 0 : 1); 3550 sli4->config.is_ulp_fc[1] = ((fw_config->ulp1_mode & 3551 (SLI4_ULP_MODE_FCOE_INI | 3552 SLI4_ULP_MODE_FCOE_TGT)) == 0 ? 0 : 1); 3553 3554 if (sli4->config.dual_ulp_capable) { 3555 /* 3556 * Lancer will not support this, so we use the values 3557 * from the READ_CONFIG. 3558 */ 3559 if (sli4->config.is_ulp_fc[0] && 3560 sli4->config.is_ulp_fc[1]) { 3561 sli4->config.max_qcount[SLI_QTYPE_WQ] = fw_config->ulp0_toe_wq_total + fw_config->ulp1_toe_wq_total; 3562 sli4->config.max_qcount[SLI_QTYPE_RQ] = fw_config->ulp0_toe_defrq_total + fw_config->ulp1_toe_defrq_total; 3563 } else if (sli4->config.is_ulp_fc[0]) { 3564 sli4->config.max_qcount[SLI_QTYPE_WQ] = fw_config->ulp0_toe_wq_total; 3565 sli4->config.max_qcount[SLI_QTYPE_RQ] = fw_config->ulp0_toe_defrq_total; 3566 } else { 3567 sli4->config.max_qcount[SLI_QTYPE_WQ] = fw_config->ulp1_toe_wq_total; 3568 sli4->config.max_qcount[SLI_QTYPE_RQ] = fw_config->ulp1_toe_defrq_total; 3569 } 3570 } 3571 } else { 3572 ocs_log_err(sli4->os, "bad QUERY_FW_CONFIG write\n"); 3573 return -1; 3574 } 3575 return 0; 3576} 3577 3578static int32_t 3579sli_get_config(sli4_t *sli4) 3580{ 3581 ocs_dma_t get_cntl_addl_data; 3582 3583 /* 3584 * Read the device configuration 3585 */ 3586 if (sli_cmd_read_config(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3587 sli4_res_read_config_t *read_config = sli4->bmbx.virt; 3588 uint32_t i; 3589 uint32_t total; 3590 3591 if (sli_bmbx_command(sli4)) { 3592 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (READ_CONFIG)\n"); 3593 return -1; 3594 } 3595 if (read_config->hdr.status) { 3596 ocs_log_err(sli4->os, "READ_CONFIG bad status %#x\n", 3597 read_config->hdr.status); 3598 return -1; 3599 } 3600 3601 sli4->config.has_extents = read_config->ext; 3602 if (FALSE == sli4->config.has_extents) { 3603 uint32_t i = 0; 3604 uint32_t *base = sli4->config.extent[0].base; 3605 3606 if (!base) { 3607 if (NULL == (base = ocs_malloc(sli4->os, SLI_RSRC_MAX * sizeof(uint32_t), 3608 OCS_M_ZERO | OCS_M_NOWAIT))) { 3609 ocs_log_err(sli4->os, "memory allocation failed for sli4_resource_t\n"); 3610 return -1; 3611 } 3612 } 3613 3614 for (i = 0; i < SLI_RSRC_MAX; i++) { 3615 sli4->config.extent[i].number = 1; 3616 sli4->config.extent[i].n_alloc = 0; 3617 sli4->config.extent[i].base = &base[i]; 3618 } 3619 3620 sli4->config.extent[SLI_RSRC_FCOE_VFI].base[0] = read_config->vfi_base; 3621 sli4->config.extent[SLI_RSRC_FCOE_VFI].size = read_config->vfi_count; 3622 3623 sli4->config.extent[SLI_RSRC_FCOE_VPI].base[0] = read_config->vpi_base; 3624 sli4->config.extent[SLI_RSRC_FCOE_VPI].size = read_config->vpi_count; 3625 3626 sli4->config.extent[SLI_RSRC_FCOE_RPI].base[0] = read_config->rpi_base; 3627 sli4->config.extent[SLI_RSRC_FCOE_RPI].size = read_config->rpi_count; 3628 3629 sli4->config.extent[SLI_RSRC_FCOE_XRI].base[0] = read_config->xri_base; 3630 sli4->config.extent[SLI_RSRC_FCOE_XRI].size = read_config->xri_count; 3631 3632 sli4->config.extent[SLI_RSRC_FCOE_FCFI].base[0] = 0; 3633 sli4->config.extent[SLI_RSRC_FCOE_FCFI].size = read_config->fcfi_count; 3634 } else { 3635 /* TODO extents*/ 3636 ; 3637 } 3638 3639 for (i = 0; i < SLI_RSRC_MAX; i++) { 3640 total = sli4->config.extent[i].number * sli4->config.extent[i].size; 3641 sli4->config.extent[i].use_map = ocs_bitmap_alloc(total); 3642 if (NULL == sli4->config.extent[i].use_map) { 3643 ocs_log_err(sli4->os, "bitmap memory allocation failed " 3644 "resource %d\n", i); 3645 return -1; 3646 } 3647 sli4->config.extent[i].map_size = total; 3648 } 3649 3650 sli4->config.topology = read_config->topology; 3651 switch (sli4->config.topology) { 3652 case SLI4_READ_CFG_TOPO_FCOE: 3653 ocs_log_debug(sli4->os, "FCoE\n"); 3654 break; 3655 case SLI4_READ_CFG_TOPO_FC: 3656 ocs_log_debug(sli4->os, "FC (unknown)\n"); 3657 break; 3658 case SLI4_READ_CFG_TOPO_FC_DA: 3659 ocs_log_debug(sli4->os, "FC (direct attach)\n"); 3660 break; 3661 case SLI4_READ_CFG_TOPO_FC_AL: 3662 ocs_log_debug(sli4->os, "FC (arbitrated loop)\n"); 3663 break; 3664 default: 3665 ocs_log_test(sli4->os, "bad topology %#x\n", sli4->config.topology); 3666 } 3667 3668 sli4->config.e_d_tov = read_config->e_d_tov; 3669 sli4->config.r_a_tov = read_config->r_a_tov; 3670 3671 sli4->config.link_module_type = read_config->lmt; 3672 3673 sli4->config.max_qcount[SLI_QTYPE_EQ] = read_config->eq_count; 3674 sli4->config.max_qcount[SLI_QTYPE_CQ] = read_config->cq_count; 3675 sli4->config.max_qcount[SLI_QTYPE_WQ] = read_config->wq_count; 3676 sli4->config.max_qcount[SLI_QTYPE_RQ] = read_config->rq_count; 3677 3678 /* 3679 * READ_CONFIG doesn't give the max number of MQ. Applications 3680 * will typically want 1, but we may need another at some future 3681 * date. Dummy up a "max" MQ count here. 3682 */ 3683 sli4->config.max_qcount[SLI_QTYPE_MQ] = SLI_USER_MQ_COUNT; 3684 } else { 3685 ocs_log_err(sli4->os, "bad READ_CONFIG write\n"); 3686 return -1; 3687 } 3688 3689 if (sli_cmd_common_get_sli4_parameters(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3690 sli4_res_common_get_sli4_parameters_t *parms = (sli4_res_common_get_sli4_parameters_t *) 3691 (((uint8_t *)sli4->bmbx.virt) + offsetof(sli4_cmd_sli_config_t, payload.embed)); 3692 3693 if (sli_bmbx_command(sli4)) { 3694 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (COMMON_GET_SLI4_PARAMETERS)\n"); 3695 return -1; 3696 } else if (parms->hdr.status) { 3697 ocs_log_err(sli4->os, "COMMON_GET_SLI4_PARAMETERS bad status %#x att'l %#x\n", 3698 parms->hdr.status, parms->hdr.additional_status); 3699 return -1; 3700 } 3701 3702 sli4->config.auto_reg = parms->areg; 3703 sli4->config.auto_xfer_rdy = parms->agxf; 3704 sli4->config.hdr_template_req = parms->hdrr; 3705 sli4->config.t10_dif_inline_capable = parms->timm; 3706 sli4->config.t10_dif_separate_capable = parms->tsmm; 3707 3708 sli4->config.mq_create_version = parms->mqv; 3709 sli4->config.cq_create_version = parms->cqv; 3710 sli4->config.rq_min_buf_size = parms->min_rq_buffer_size; 3711 sli4->config.rq_max_buf_size = parms->max_rq_buffer_size; 3712 3713 sli4->config.qpage_count[SLI_QTYPE_EQ] = parms->eq_page_cnt; 3714 sli4->config.qpage_count[SLI_QTYPE_CQ] = parms->cq_page_cnt; 3715 sli4->config.qpage_count[SLI_QTYPE_MQ] = parms->mq_page_cnt; 3716 sli4->config.qpage_count[SLI_QTYPE_WQ] = parms->wq_page_cnt; 3717 sli4->config.qpage_count[SLI_QTYPE_RQ] = parms->rq_page_cnt; 3718 3719 /* save count methods and masks for each queue type */ 3720 sli4->config.count_mask[SLI_QTYPE_EQ] = parms->eqe_count_mask; 3721 sli4->config.count_method[SLI_QTYPE_EQ] = parms->eqe_count_method; 3722 sli4->config.count_mask[SLI_QTYPE_CQ] = parms->cqe_count_mask; 3723 sli4->config.count_method[SLI_QTYPE_CQ] = parms->cqe_count_method; 3724 sli4->config.count_mask[SLI_QTYPE_MQ] = parms->mqe_count_mask; 3725 sli4->config.count_method[SLI_QTYPE_MQ] = parms->mqe_count_method; 3726 sli4->config.count_mask[SLI_QTYPE_WQ] = parms->wqe_count_mask; 3727 sli4->config.count_method[SLI_QTYPE_WQ] = parms->wqe_count_method; 3728 sli4->config.count_mask[SLI_QTYPE_RQ] = parms->rqe_count_mask; 3729 sli4->config.count_method[SLI_QTYPE_RQ] = parms->rqe_count_method; 3730 3731 /* now calculate max queue entries */ 3732 sli_calc_max_qentries(sli4); 3733 3734 sli4->config.max_sgl_pages = parms->sgl_page_cnt; /* max # of pages */ 3735 sli4->config.sgl_page_sizes = parms->sgl_page_sizes; /* bit map of available sizes */ 3736 /* ignore HLM here. Use value from REQUEST_FEATURES */ 3737 3738 sli4->config.sge_supported_length = parms->sge_supported_length; 3739 if (sli4->config.sge_supported_length > OCS_MAX_SGE_SIZE) 3740 sli4->config.sge_supported_length = OCS_MAX_SGE_SIZE; 3741 3742 sli4->config.sgl_pre_registration_required = parms->sglr; 3743 /* default to using pre-registered SGL's */ 3744 sli4->config.sgl_pre_registered = TRUE; 3745 3746 sli4->config.perf_hint = parms->phon; 3747 sli4->config.perf_wq_id_association = parms->phwq; 3748 3749 sli4->config.rq_batch = parms->rq_db_window; 3750 3751 /* save the fields for skyhawk SGL chaining */ 3752 sli4->config.sgl_chaining_params.chaining_capable = 3753 (parms->sglc == 1); 3754 sli4->config.sgl_chaining_params.frag_num_field_offset = 3755 parms->frag_num_field_offset; 3756 sli4->config.sgl_chaining_params.frag_num_field_mask = 3757 (1ull << parms->frag_num_field_size) - 1; 3758 sli4->config.sgl_chaining_params.sgl_index_field_offset = 3759 parms->sgl_index_field_offset; 3760 sli4->config.sgl_chaining_params.sgl_index_field_mask = 3761 (1ull << parms->sgl_index_field_size) - 1; 3762 sli4->config.sgl_chaining_params.chain_sge_initial_value_lo = 3763 parms->chain_sge_initial_value_lo; 3764 sli4->config.sgl_chaining_params.chain_sge_initial_value_hi = 3765 parms->chain_sge_initial_value_hi; 3766 3767 /* Use the highest available WQE size. */ 3768 if (parms->wqe_sizes & SLI4_128BYTE_WQE_SUPPORT) { 3769 sli4->config.wqe_size = SLI4_WQE_EXT_BYTES; 3770 } else { 3771 sli4->config.wqe_size = SLI4_WQE_BYTES; 3772 } 3773 } 3774 3775 if (sli_query_fw_config(sli4)) { 3776 ocs_log_err(sli4->os, "Error sending QUERY_FW_CONFIG\n"); 3777 return -1; 3778 } 3779 3780 sli4->config.port_number = 0; 3781 3782 /* 3783 * Issue COMMON_GET_CNTL_ATTRIBUTES to get port_number. Temporarily 3784 * uses VPD DMA buffer as the response won't fit in the embedded 3785 * buffer. 3786 */ 3787 if (sli_cmd_common_get_cntl_attributes(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, &sli4->vpd.data)) { 3788 sli4_res_common_get_cntl_attributes_t *attr = sli4->vpd.data.virt; 3789 3790 if (sli_bmbx_command(sli4)) { 3791 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (COMMON_GET_CNTL_ATTRIBUTES)\n"); 3792 return -1; 3793 } else if (attr->hdr.status) { 3794 ocs_log_err(sli4->os, "COMMON_GET_CNTL_ATTRIBUTES bad status %#x att'l %#x\n", 3795 attr->hdr.status, attr->hdr.additional_status); 3796 return -1; 3797 } 3798 3799 sli4->config.port_number = attr->port_number; 3800 3801 ocs_memcpy(sli4->config.bios_version_string, attr->bios_version_string, 3802 sizeof(sli4->config.bios_version_string)); 3803 } else { 3804 ocs_log_err(sli4->os, "bad COMMON_GET_CNTL_ATTRIBUTES write\n"); 3805 return -1; 3806 } 3807 3808 if (ocs_dma_alloc(sli4->os, &get_cntl_addl_data, sizeof(sli4_res_common_get_cntl_addl_attributes_t), 3809 OCS_MIN_DMA_ALIGNMENT)) { 3810 ocs_log_err(sli4->os, "Failed to allocate memory for GET_CNTL_ADDL_ATTR data\n"); 3811 } else { 3812 if (sli_cmd_common_get_cntl_addl_attributes(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, 3813 &get_cntl_addl_data)) { 3814 sli4_res_common_get_cntl_addl_attributes_t *attr = get_cntl_addl_data.virt; 3815 3816 if (sli_bmbx_command(sli4)) { 3817 ocs_log_crit(sli4->os, 3818 "bootstrap mailbox write fail (COMMON_GET_CNTL_ADDL_ATTRIBUTES)\n"); 3819 ocs_dma_free(sli4->os, &get_cntl_addl_data); 3820 return -1; 3821 } 3822 if (attr->hdr.status) { 3823 ocs_log_err(sli4->os, "COMMON_GET_CNTL_ADDL_ATTRIBUTES bad status %#x\n", 3824 attr->hdr.status); 3825 ocs_dma_free(sli4->os, &get_cntl_addl_data); 3826 return -1; 3827 } 3828 3829 ocs_memcpy(sli4->config.ipl_name, attr->ipl_file_name, sizeof(sli4->config.ipl_name)); 3830 3831 ocs_log_debug(sli4->os, "IPL:%s \n", (char*)sli4->config.ipl_name); 3832 } else { 3833 ocs_log_err(sli4->os, "bad COMMON_GET_CNTL_ADDL_ATTRIBUTES write\n"); 3834 ocs_dma_free(sli4->os, &get_cntl_addl_data); 3835 return -1; 3836 } 3837 3838 ocs_dma_free(sli4->os, &get_cntl_addl_data); 3839 } 3840 3841 if (sli_cmd_common_get_port_name(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3842 sli4_res_common_get_port_name_t *port_name = (sli4_res_common_get_port_name_t *)(((uint8_t *)sli4->bmbx.virt) + 3843 offsetof(sli4_cmd_sli_config_t, payload.embed)); 3844 3845 if (sli_bmbx_command(sli4)) { 3846 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (COMMON_GET_PORT_NAME)\n"); 3847 return -1; 3848 } 3849 3850 sli4->config.port_name[0] = port_name->port_name[sli4->config.port_number]; 3851 } 3852 sli4->config.port_name[1] = '\0'; 3853 3854 if (sli_cmd_read_rev(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, &sli4->vpd.data)) { 3855 sli4_cmd_read_rev_t *read_rev = sli4->bmbx.virt; 3856 3857 if (sli_bmbx_command(sli4)) { 3858 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (READ_REV)\n"); 3859 return -1; 3860 } 3861 if (read_rev->hdr.status) { 3862 ocs_log_err(sli4->os, "READ_REV bad status %#x\n", 3863 read_rev->hdr.status); 3864 return -1; 3865 } 3866 3867 sli4->config.fw_rev[0] = read_rev->first_fw_id; 3868 ocs_memcpy(sli4->config.fw_name[0],read_rev->first_fw_name, sizeof(sli4->config.fw_name[0])); 3869 3870 sli4->config.fw_rev[1] = read_rev->second_fw_id; 3871 ocs_memcpy(sli4->config.fw_name[1],read_rev->second_fw_name, sizeof(sli4->config.fw_name[1])); 3872 3873 sli4->config.hw_rev[0] = read_rev->first_hw_revision; 3874 sli4->config.hw_rev[1] = read_rev->second_hw_revision; 3875 sli4->config.hw_rev[2] = read_rev->third_hw_revision; 3876 3877 ocs_log_debug(sli4->os, "FW1:%s (%08x) / FW2:%s (%08x)\n", 3878 read_rev->first_fw_name, read_rev->first_fw_id, 3879 read_rev->second_fw_name, read_rev->second_fw_id); 3880 3881 ocs_log_debug(sli4->os, "HW1: %08x / HW2: %08x\n", read_rev->first_hw_revision, 3882 read_rev->second_hw_revision); 3883 3884 /* Check that all VPD data was returned */ 3885 if (read_rev->returned_vpd_length != read_rev->actual_vpd_length) { 3886 ocs_log_test(sli4->os, "VPD length: available=%d returned=%d actual=%d\n", 3887 read_rev->available_length, 3888 read_rev->returned_vpd_length, 3889 read_rev->actual_vpd_length); 3890 } 3891 sli4->vpd.length = read_rev->returned_vpd_length; 3892 } else { 3893 ocs_log_err(sli4->os, "bad READ_REV write\n"); 3894 return -1; 3895 } 3896 3897 if (sli_cmd_read_nvparms(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE)) { 3898 sli4_cmd_read_nvparms_t *read_nvparms = sli4->bmbx.virt; 3899 3900 if (sli_bmbx_command(sli4)) { 3901 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (READ_NVPARMS)\n"); 3902 return -1; 3903 } 3904 if (read_nvparms->hdr.status) { 3905 ocs_log_err(sli4->os, "READ_NVPARMS bad status %#x\n", 3906 read_nvparms->hdr.status); 3907 return -1; 3908 } 3909 3910 ocs_memcpy(sli4->config.wwpn, read_nvparms->wwpn, sizeof(sli4->config.wwpn)); 3911 ocs_memcpy(sli4->config.wwnn, read_nvparms->wwnn, sizeof(sli4->config.wwnn)); 3912 3913 ocs_log_debug(sli4->os, "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", 3914 sli4->config.wwpn[0], 3915 sli4->config.wwpn[1], 3916 sli4->config.wwpn[2], 3917 sli4->config.wwpn[3], 3918 sli4->config.wwpn[4], 3919 sli4->config.wwpn[5], 3920 sli4->config.wwpn[6], 3921 sli4->config.wwpn[7]); 3922 ocs_log_debug(sli4->os, "WWNN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", 3923 sli4->config.wwnn[0], 3924 sli4->config.wwnn[1], 3925 sli4->config.wwnn[2], 3926 sli4->config.wwnn[3], 3927 sli4->config.wwnn[4], 3928 sli4->config.wwnn[5], 3929 sli4->config.wwnn[6], 3930 sli4->config.wwnn[7]); 3931 } else { 3932 ocs_log_err(sli4->os, "bad READ_NVPARMS write\n"); 3933 return -1; 3934 } 3935 3936 return 0; 3937} 3938 3939/**************************************************************************** 3940 * Public functions 3941 */ 3942 3943/** 3944 * @ingroup sli 3945 * @brief Set up the SLI context. 3946 * 3947 * @param sli4 SLI context. 3948 * @param os Device abstraction. 3949 * @param port_type Protocol type of port (for example, FC and NIC). 3950 * 3951 * @return Returns 0 on success, or a non-zero value on failure. 3952 */ 3953int32_t 3954sli_setup(sli4_t *sli4, ocs_os_handle_t os, sli4_port_type_e port_type) 3955{ 3956 uint32_t sli_intf = UINT32_MAX; 3957 uint32_t pci_class_rev = 0; 3958 uint32_t rev_id = 0; 3959 uint32_t family = 0; 3960 uint32_t i; 3961 sli4_asic_entry_t *asic; 3962 3963 ocs_memset(sli4, 0, sizeof(sli4_t)); 3964 3965 sli4->os = os; 3966 sli4->port_type = port_type; 3967 3968 /* 3969 * Read the SLI_INTF register to discover the register layout 3970 * and other capability information 3971 */ 3972 sli_intf = ocs_config_read32(os, SLI4_INTF_REG); 3973 3974 if (sli_intf_valid_check(sli_intf)) { 3975 ocs_log_err(os, "SLI_INTF is not valid\n"); 3976 return -1; 3977 } 3978 3979 /* driver only support SLI-4 */ 3980 sli4->sli_rev = sli_intf_sli_revision(sli_intf); 3981 if (4 != sli4->sli_rev) { 3982 ocs_log_err(os, "Unsupported SLI revision (intf=%#x)\n", 3983 sli_intf); 3984 return -1; 3985 } 3986 3987 sli4->sli_family = sli_intf_sli_family(sli_intf); 3988 3989 sli4->if_type = sli_intf_if_type(sli_intf); 3990 3991 if (SLI4_IF_TYPE_LANCER_FC_ETH == sli4->if_type) { 3992 ocs_log_debug(os, "status=%#x error1=%#x error2=%#x\n", 3993 sli_reg_read(sli4, SLI4_REG_SLIPORT_STATUS), 3994 sli_reg_read(sli4, SLI4_REG_SLIPORT_ERROR1), 3995 sli_reg_read(sli4, SLI4_REG_SLIPORT_ERROR2)); 3996 } 3997 3998 /* 3999 * set the ASIC type and revision 4000 */ 4001 pci_class_rev = ocs_config_read32(os, SLI4_PCI_CLASS_REVISION); 4002 rev_id = sli_pci_rev_id(pci_class_rev); 4003 family = sli4->sli_family; 4004 if (family == SLI4_FAMILY_CHECK_ASIC_TYPE) { 4005 uint32_t asic_id = ocs_config_read32(os, SLI4_ASIC_ID_REG); 4006 family = sli_asic_gen(asic_id); 4007 } 4008 4009 for (i = 0, asic = sli4_asic_table; i < ARRAY_SIZE(sli4_asic_table); i++, asic++) { 4010 if ((rev_id == asic->rev_id) && (family == asic->family)) { 4011 sli4->asic_type = asic->type; 4012 sli4->asic_rev = asic->rev; 4013 break; 4014 } 4015 } 4016 /* Fail if no matching asic type/rev was found */ 4017 if( (sli4->asic_type == 0) || (sli4->asic_rev == 0)) { 4018 ocs_log_err(os, "no matching asic family/rev found: %02x/%02x\n", family, rev_id); 4019 return -1; 4020 } 4021 4022 /* 4023 * The bootstrap mailbox is equivalent to a MQ with a single 256 byte 4024 * entry, a CQ with a single 16 byte entry, and no event queue. 4025 * Alignment must be 16 bytes as the low order address bits in the 4026 * address register are also control / status. 4027 */ 4028 if (ocs_dma_alloc(sli4->os, &sli4->bmbx, SLI4_BMBX_SIZE + 4029 sizeof(sli4_mcqe_t), 16)) { 4030 ocs_log_err(os, "bootstrap mailbox allocation failed\n"); 4031 return -1; 4032 } 4033 4034 if (sli4->bmbx.phys & SLI4_BMBX_MASK_LO) { 4035 ocs_log_err(os, "bad alignment for bootstrap mailbox\n"); 4036 return -1; 4037 } 4038 4039 ocs_log_debug(os, "bmbx v=%p p=0x%x %08x s=%zd\n", sli4->bmbx.virt, 4040 ocs_addr32_hi(sli4->bmbx.phys), 4041 ocs_addr32_lo(sli4->bmbx.phys), 4042 sli4->bmbx.size); 4043 4044 /* TODO 4096 is arbitrary. What should this value actually be? */ 4045 if (ocs_dma_alloc(sli4->os, &sli4->vpd.data, 4096/*TODO*/, 4096)) { 4046 /* Note that failure isn't fatal in this specific case */ 4047 sli4->vpd.data.size = 0; 4048 ocs_log_test(os, "VPD buffer allocation failed\n"); 4049 } 4050 4051 if (sli_fw_init(sli4)) { 4052 ocs_log_err(sli4->os, "FW initialization failed\n"); 4053 return -1; 4054 } 4055 4056 /* 4057 * Set one of fcpi(initiator), fcpt(target), fcpc(combined) to true 4058 * in addition to any other desired features 4059 */ 4060 sli4->config.features.flag.iaab = TRUE; 4061 sli4->config.features.flag.npiv = TRUE; 4062 sli4->config.features.flag.dif = TRUE; 4063 sli4->config.features.flag.vf = TRUE; 4064 sli4->config.features.flag.fcpc = TRUE; 4065 sli4->config.features.flag.iaar = TRUE; 4066 sli4->config.features.flag.hlm = TRUE; 4067 sli4->config.features.flag.perfh = TRUE; 4068 sli4->config.features.flag.rxseq = TRUE; 4069 sli4->config.features.flag.rxri = TRUE; 4070 sli4->config.features.flag.mrqp = TRUE; 4071 4072 /* use performance hints if available */ 4073 if (sli4->config.perf_hint) { 4074 sli4->config.features.flag.perfh = TRUE; 4075 } 4076 4077 if (sli_request_features(sli4, &sli4->config.features, TRUE)) { 4078 return -1; 4079 } 4080 4081 if (sli_get_config(sli4)) { 4082 return -1; 4083 } 4084 4085 return 0; 4086} 4087 4088int32_t 4089sli_init(sli4_t *sli4) 4090{ 4091 4092 if (sli4->config.has_extents) { 4093 /* TODO COMMON_ALLOC_RESOURCE_EXTENTS */; 4094 ocs_log_test(sli4->os, "XXX need to implement extent allocation\n"); 4095 return -1; 4096 } 4097 4098 sli4->config.features.flag.hlm = sli4->config.high_login_mode; 4099 sli4->config.features.flag.rxseq = FALSE; 4100 sli4->config.features.flag.rxri = FALSE; 4101 4102 if (sli_request_features(sli4, &sli4->config.features, FALSE)) { 4103 return -1; 4104 } 4105 4106 return 0; 4107} 4108 4109int32_t 4110sli_reset(sli4_t *sli4) 4111{ 4112 uint32_t i; 4113 4114 if (sli_fw_init(sli4)) { 4115 ocs_log_crit(sli4->os, "FW initialization failed\n"); 4116 return -1; 4117 } 4118 4119 if (sli4->config.extent[0].base) { 4120 ocs_free(sli4->os, sli4->config.extent[0].base, SLI_RSRC_MAX * sizeof(uint32_t)); 4121 sli4->config.extent[0].base = NULL; 4122 } 4123 4124 for (i = 0; i < SLI_RSRC_MAX; i++) { 4125 if (sli4->config.extent[i].use_map) { 4126 ocs_bitmap_free(sli4->config.extent[i].use_map); 4127 sli4->config.extent[i].use_map = NULL; 4128 } 4129 sli4->config.extent[i].base = NULL; 4130 } 4131 4132 if (sli_get_config(sli4)) { 4133 return -1; 4134 } 4135 4136 return 0; 4137} 4138 4139/** 4140 * @ingroup sli 4141 * @brief Issue a Firmware Reset. 4142 * 4143 * @par Description 4144 * Issues a Firmware Reset to the chip. This reset affects the entire chip, 4145 * so all PCI function on the same PCI bus and device are affected. 4146 * @n @n This type of reset can be used to activate newly downloaded firmware. 4147 * @n @n The driver should be considered to be in an unknown state after this 4148 * reset and should be reloaded. 4149 * 4150 * @param sli4 SLI context. 4151 * 4152 * @return Returns 0 on success, or -1 otherwise. 4153 */ 4154 4155int32_t 4156sli_fw_reset(sli4_t *sli4) 4157{ 4158 uint32_t val; 4159 uint32_t ready; 4160 4161 /* 4162 * Firmware must be ready before issuing the reset. 4163 */ 4164 ready = sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC); 4165 if (!ready) { 4166 ocs_log_crit(sli4->os, "FW status is NOT ready\n"); 4167 return -1; 4168 } 4169 switch(sli4->if_type) { 4170 case SLI4_IF_TYPE_BE3_SKH_PF: 4171 /* BE3 / Skyhawk use PCICFG_SOFT_RESET_CSR */ 4172 val = ocs_config_read32(sli4->os, SLI4_PCI_SOFT_RESET_CSR); 4173 val |= SLI4_PCI_SOFT_RESET_MASK; 4174 ocs_config_write32(sli4->os, SLI4_PCI_SOFT_RESET_CSR, val); 4175 break; 4176 case SLI4_IF_TYPE_LANCER_FC_ETH: 4177 /* Lancer uses PHYDEV_CONTROL */ 4178 4179 val = SLI4_PHYDEV_CONTROL_FRST; 4180 sli_reg_write(sli4, SLI4_REG_PHYSDEV_CONTROL, val); 4181 break; 4182 default: 4183 ocs_log_test(sli4->os, "Unexpected iftype %d\n", sli4->if_type); 4184 return -1; 4185 break; 4186 } 4187 4188 /* wait for the FW to become ready after the reset */ 4189 ready = sli_wait_for_fw_ready(sli4, SLI4_FW_READY_TIMEOUT_MSEC); 4190 if (!ready) { 4191 ocs_log_crit(sli4->os, "Failed to become ready after firmware reset\n"); 4192 return -1; 4193 } 4194 return 0; 4195} 4196 4197/** 4198 * @ingroup sli 4199 * @brief Tear down a SLI context. 4200 * 4201 * @param sli4 SLI context. 4202 * 4203 * @return Returns 0 on success, or non-zero otherwise. 4204 */ 4205int32_t 4206sli_teardown(sli4_t *sli4) 4207{ 4208 uint32_t i; 4209 4210 if (sli4->config.extent[0].base) { 4211 ocs_free(sli4->os, sli4->config.extent[0].base, SLI_RSRC_MAX * sizeof(uint32_t)); 4212 sli4->config.extent[0].base = NULL; 4213 } 4214 4215 for (i = 0; i < SLI_RSRC_MAX; i++) { 4216 if (sli4->config.has_extents) { 4217 /* TODO COMMON_DEALLOC_RESOURCE_EXTENTS */; 4218 } 4219 4220 sli4->config.extent[i].base = NULL; 4221 4222 ocs_bitmap_free(sli4->config.extent[i].use_map); 4223 sli4->config.extent[i].use_map = NULL; 4224 } 4225 4226 if (sli_fw_term(sli4)) { 4227 ocs_log_err(sli4->os, "FW deinitialization failed\n"); 4228 } 4229 4230 ocs_dma_free(sli4->os, &sli4->vpd.data); 4231 ocs_dma_free(sli4->os, &sli4->bmbx); 4232 4233 return 0; 4234} 4235 4236/** 4237 * @ingroup sli 4238 * @brief Register a callback for the given event. 4239 * 4240 * @param sli4 SLI context. 4241 * @param which Event of interest. 4242 * @param func Function to call when the event occurs. 4243 * @param arg Argument passed to the callback function. 4244 * 4245 * @return Returns 0 on success, or non-zero otherwise. 4246 */ 4247int32_t 4248sli_callback(sli4_t *sli4, sli4_callback_e which, void *func, void *arg) 4249{ 4250 4251 if (!sli4 || !func || (which >= SLI4_CB_MAX)) { 4252 ocs_log_err(NULL, "bad parameter sli4=%p which=%#x func=%p\n", 4253 sli4, which, func); 4254 return -1; 4255 } 4256 4257 switch (which) { 4258 case SLI4_CB_LINK: 4259 sli4->link = func; 4260 sli4->link_arg = arg; 4261 break; 4262 case SLI4_CB_FIP: 4263 sli4->fip = func; 4264 sli4->fip_arg = arg; 4265 break; 4266 default: 4267 ocs_log_test(sli4->os, "unknown callback %#x\n", which); 4268 return -1; 4269 } 4270 4271 return 0; 4272} 4273 4274/** 4275 * @ingroup sli 4276 * @brief Initialize a queue object. 4277 * 4278 * @par Description 4279 * This initializes the sli4_queue_t object members, including the underlying 4280 * DMA memory. 4281 * 4282 * @param sli4 SLI context. 4283 * @param q Pointer to queue object. 4284 * @param qtype Type of queue to create. 4285 * @param size Size of each entry. 4286 * @param n_entries Number of entries to allocate. 4287 * @param align Starting memory address alignment. 4288 * 4289 * @note Checks if using the existing DMA memory (if any) is possible. If not, 4290 * it frees the existing memory and re-allocates. 4291 * 4292 * @return Returns 0 on success, or non-zero otherwise. 4293 */ 4294int32_t 4295__sli_queue_init(sli4_t *sli4, sli4_queue_t *q, uint32_t qtype, 4296 size_t size, uint32_t n_entries, uint32_t align) 4297{ 4298 4299 if ((q->dma.virt == NULL) || (size != q->size) || (n_entries != q->length)) { 4300 if (q->dma.size) { 4301 ocs_dma_free(sli4->os, &q->dma); 4302 } 4303 4304 ocs_memset(q, 0, sizeof(sli4_queue_t)); 4305 4306 if (ocs_dma_alloc(sli4->os, &q->dma, size * n_entries, align)) { 4307 ocs_log_err(sli4->os, "%s allocation failed\n", SLI_QNAME[qtype]); 4308 return -1; 4309 } 4310 4311 ocs_memset(q->dma.virt, 0, size * n_entries); 4312 4313 ocs_lock_init(sli4->os, &q->lock, "%s lock[%d:%p]", 4314 SLI_QNAME[qtype], ocs_instance(sli4->os), &q->lock); 4315 4316 q->type = qtype; 4317 q->size = size; 4318 q->length = n_entries; 4319 4320 /* Limit to hwf the queue size per interrupt */ 4321 q->proc_limit = n_entries / 2; 4322 4323 switch(q->type) { 4324 case SLI_QTYPE_EQ: 4325 q->posted_limit = q->length / 2; 4326 break; 4327 default: 4328 if ((sli4->if_type == SLI4_IF_TYPE_BE3_SKH_PF) || 4329 (sli4->if_type == SLI4_IF_TYPE_BE3_SKH_VF)) { 4330 /* For Skyhawk, ring the doorbell more often */ 4331 q->posted_limit = 8; 4332 } else { 4333 q->posted_limit = 64; 4334 } 4335 break; 4336 } 4337 } 4338 4339 return 0; 4340} 4341 4342/** 4343 * @ingroup sli 4344 * @brief Issue the command to create a queue. 4345 * 4346 * @param sli4 SLI context. 4347 * @param q Pointer to queue object. 4348 * 4349 * @return Returns 0 on success, or non-zero otherwise. 4350 */ 4351int32_t 4352__sli_create_queue(sli4_t *sli4, sli4_queue_t *q) 4353{ 4354 sli4_res_common_create_queue_t *res_q = NULL; 4355 4356 if (sli_bmbx_command(sli4)){ 4357 ocs_log_crit(sli4->os, "bootstrap mailbox write fail %s\n", 4358 SLI_QNAME[q->type]); 4359 ocs_dma_free(sli4->os, &q->dma); 4360 return -1; 4361 } 4362 if (sli_res_sli_config(sli4->bmbx.virt)) { 4363 ocs_log_err(sli4->os, "bad status create %s\n", SLI_QNAME[q->type]); 4364 ocs_dma_free(sli4->os, &q->dma); 4365 return -1; 4366 } 4367 res_q = (void *)((uint8_t *)sli4->bmbx.virt + 4368 offsetof(sli4_cmd_sli_config_t, payload)); 4369 4370 if (res_q->hdr.status) { 4371 ocs_log_err(sli4->os, "bad create %s status=%#x addl=%#x\n", 4372 SLI_QNAME[q->type], 4373 res_q->hdr.status, res_q->hdr.additional_status); 4374 ocs_dma_free(sli4->os, &q->dma); 4375 return -1; 4376 } else { 4377 q->id = res_q->q_id; 4378 q->doorbell_offset = res_q->db_offset; 4379 q->doorbell_rset = res_q->db_rs; 4380 4381 switch (q->type) { 4382 case SLI_QTYPE_EQ: 4383 /* No doorbell information in response for EQs */ 4384 q->doorbell_offset = regmap[SLI4_REG_EQCQ_DOORBELL][sli4->if_type].off; 4385 q->doorbell_rset = regmap[SLI4_REG_EQCQ_DOORBELL][sli4->if_type].rset; 4386 break; 4387 case SLI_QTYPE_CQ: 4388 /* No doorbell information in response for CQs */ 4389 q->doorbell_offset = regmap[SLI4_REG_EQCQ_DOORBELL][sli4->if_type].off; 4390 q->doorbell_rset = regmap[SLI4_REG_EQCQ_DOORBELL][sli4->if_type].rset; 4391 break; 4392 case SLI_QTYPE_MQ: 4393 /* No doorbell information in response for MQs */ 4394 q->doorbell_offset = regmap[SLI4_REG_MQ_DOORBELL][sli4->if_type].off; 4395 q->doorbell_rset = regmap[SLI4_REG_MQ_DOORBELL][sli4->if_type].rset; 4396 break; 4397 case SLI_QTYPE_RQ: 4398 /* set the doorbell for non-skyhawks */ 4399 if (!sli4->config.dual_ulp_capable) { 4400 q->doorbell_offset = regmap[SLI4_REG_FCOE_RQ_DOORBELL][sli4->if_type].off; 4401 q->doorbell_rset = regmap[SLI4_REG_FCOE_RQ_DOORBELL][sli4->if_type].rset; 4402 } 4403 break; 4404 case SLI_QTYPE_WQ: 4405 /* set the doorbell for non-skyhawks */ 4406 if (!sli4->config.dual_ulp_capable) { 4407 q->doorbell_offset = regmap[SLI4_REG_IO_WQ_DOORBELL][sli4->if_type].off; 4408 q->doorbell_rset = regmap[SLI4_REG_IO_WQ_DOORBELL][sli4->if_type].rset; 4409 } 4410 break; 4411 default: 4412 break; 4413 } 4414 } 4415 4416 return 0; 4417} 4418 4419/** 4420 * @ingroup sli 4421 * @brief Get queue entry size. 4422 * 4423 * Get queue entry size given queue type. 4424 * 4425 * @param sli4 SLI context 4426 * @param qtype Type for which the entry size is returned. 4427 * 4428 * @return Returns > 0 on success (queue entry size), or a negative value on failure. 4429 */ 4430int32_t 4431sli_get_queue_entry_size(sli4_t *sli4, uint32_t qtype) 4432{ 4433 uint32_t size = 0; 4434 4435 if (!sli4) { 4436 ocs_log_err(NULL, "bad parameter sli4=%p\n", sli4); 4437 return -1; 4438 } 4439 4440 switch (qtype) { 4441 case SLI_QTYPE_EQ: 4442 size = sizeof(uint32_t); 4443 break; 4444 case SLI_QTYPE_CQ: 4445 size = 16; 4446 break; 4447 case SLI_QTYPE_MQ: 4448 size = 256; 4449 break; 4450 case SLI_QTYPE_WQ: 4451 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 4452 size = sli4->config.wqe_size; 4453 } else { 4454 /* TODO */ 4455 ocs_log_test(sli4->os, "unsupported queue entry size\n"); 4456 return -1; 4457 } 4458 break; 4459 case SLI_QTYPE_RQ: 4460 size = SLI4_FCOE_RQE_SIZE; 4461 break; 4462 default: 4463 ocs_log_test(sli4->os, "unknown queue type %d\n", qtype); 4464 return -1; 4465 } 4466 return size; 4467} 4468 4469/** 4470 * @ingroup sli 4471 * @brief Modify the delay timer for all the EQs 4472 * 4473 * @param sli4 SLI context. 4474 * @param eq Array of EQs. 4475 * @param num_eq Count of EQs. 4476 * @param shift Phase shift for staggering interrupts. 4477 * @param delay_mult Delay multiplier for limiting interrupt frequency. 4478 * 4479 * @return Returns 0 on success, or -1 otherwise. 4480 */ 4481int32_t 4482sli_eq_modify_delay(sli4_t *sli4, sli4_queue_t *eq, uint32_t num_eq, uint32_t shift, uint32_t delay_mult) 4483{ 4484 4485 sli_cmd_common_modify_eq_delay(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, eq, num_eq, shift, delay_mult); 4486 4487 if (sli_bmbx_command(sli4)) { 4488 ocs_log_crit(sli4->os, "bootstrap mailbox write fail (MODIFY EQ DELAY)\n"); 4489 return -1; 4490 } 4491 if (sli_res_sli_config(sli4->bmbx.virt)) { 4492 ocs_log_err(sli4->os, "bad status MODIFY EQ DELAY\n"); 4493 return -1; 4494 } 4495 4496 return 0; 4497} 4498 4499/** 4500 * @ingroup sli 4501 * @brief Allocate a queue. 4502 * 4503 * @par Description 4504 * Allocates DMA memory and configures the requested queue type. 4505 * 4506 * @param sli4 SLI context. 4507 * @param qtype Type of queue to create. 4508 * @param q Pointer to the queue object. 4509 * @param n_entries Number of entries to allocate. 4510 * @param assoc Associated queue (that is, the EQ for a CQ, the CQ for a MQ, and so on). 4511 * @param ulp The ULP to bind, which is only used for WQ and RQs 4512 * 4513 * @return Returns 0 on success, or -1 otherwise. 4514 */ 4515int32_t 4516sli_queue_alloc(sli4_t *sli4, uint32_t qtype, sli4_queue_t *q, uint32_t n_entries, 4517 sli4_queue_t *assoc, uint16_t ulp) 4518{ 4519 int32_t size; 4520 uint32_t align = 0; 4521 sli4_create_q_fn_t create = NULL; 4522 4523 if (!sli4 || !q) { 4524 ocs_log_err(NULL, "bad parameter sli4=%p q=%p\n", sli4, q); 4525 return -1; 4526 } 4527 4528 /* get queue size */ 4529 size = sli_get_queue_entry_size(sli4, qtype); 4530 if (size < 0) 4531 return -1; 4532 align = SLI_PAGE_SIZE; 4533 4534 switch (qtype) { 4535 case SLI_QTYPE_EQ: 4536 create = sli_cmd_common_create_eq; 4537 break; 4538 case SLI_QTYPE_CQ: 4539 create = sli_cmd_common_create_cq; 4540 break; 4541 case SLI_QTYPE_MQ: 4542 /* Validate the number of entries */ 4543 switch (n_entries) { 4544 case 16: 4545 case 32: 4546 case 64: 4547 case 128: 4548 break; 4549 default: 4550 ocs_log_test(sli4->os, "illegal n_entries value %d for MQ\n", n_entries); 4551 return -1; 4552 } 4553 assoc->u.flag.is_mq = TRUE; 4554 create = sli_cmd_common_create_mq_ext; 4555 break; 4556 case SLI_QTYPE_WQ: 4557 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 4558 if (sli4->if_type == SLI4_IF_TYPE_BE3_SKH_PF) { 4559 create = sli_cmd_fcoe_wq_create; 4560 } else { 4561 create = sli_cmd_fcoe_wq_create_v1; 4562 } 4563 } else { 4564 /* TODO */ 4565 ocs_log_test(sli4->os, "unsupported WQ create\n"); 4566 return -1; 4567 } 4568 break; 4569 default: 4570 ocs_log_test(sli4->os, "unknown queue type %d\n", qtype); 4571 return -1; 4572 } 4573 4574 if (__sli_queue_init(sli4, q, qtype, size, n_entries, align)) { 4575 ocs_log_err(sli4->os, "%s allocation failed\n", SLI_QNAME[qtype]); 4576 return -1; 4577 } 4578 4579 if (create(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, &q->dma, assoc ? assoc->id : 0, ulp)) { 4580 if (__sli_create_queue(sli4, q)) { 4581 ocs_log_err(sli4->os, "create %s failed\n", SLI_QNAME[qtype]); 4582 return -1; 4583 } 4584 q->ulp = ulp; 4585 } else { 4586 ocs_log_err(sli4->os, "cannot create %s\n", SLI_QNAME[qtype]); 4587 return -1; 4588 } 4589 4590 return 0; 4591} 4592 4593/** 4594 * @ingroup sli 4595 * @brief Allocate a c queue set. 4596 * 4597 * @param sli4 SLI context. 4598 * @param num_cqs to create 4599 * @param qs Pointers to the queue objects. 4600 * @param n_entries Number of entries to allocate per CQ. 4601 * @param eqs Associated event queues 4602 * 4603 * @return Returns 0 on success, or -1 otherwise. 4604 */ 4605int32_t 4606sli_cq_alloc_set(sli4_t *sli4, sli4_queue_t *qs[], uint32_t num_cqs, 4607 uint32_t n_entries, sli4_queue_t *eqs[]) 4608{ 4609 uint32_t i, offset = 0, page_bytes = 0, payload_size, cmd_size = 0; 4610 uint32_t p = 0, page_size = 0, n_cqe = 0, num_pages_cq; 4611 uintptr_t addr; 4612 ocs_dma_t dma; 4613 sli4_req_common_create_cq_set_v0_t *req = NULL; 4614 sli4_res_common_create_queue_set_t *res = NULL; 4615 4616 if (!sli4) { 4617 ocs_log_err(NULL, "bad parameter sli4=%p\n", sli4); 4618 return -1; 4619 } 4620 4621 memset(&dma, 0, sizeof(dma)); 4622 4623 /* Align the queue DMA memory */ 4624 for (i = 0; i < num_cqs; i++) { 4625 if (__sli_queue_init(sli4, qs[i], SLI_QTYPE_CQ, SLI4_CQE_BYTES, 4626 n_entries, SLI_PAGE_SIZE)) { 4627 ocs_log_err(sli4->os, "Queue init failed.\n"); 4628 goto error; 4629 } 4630 } 4631 4632 n_cqe = qs[0]->dma.size / SLI4_CQE_BYTES; 4633 switch (n_cqe) { 4634 case 256: 4635 case 512: 4636 case 1024: 4637 case 2048: 4638 page_size = 1; 4639 break; 4640 case 4096: 4641 page_size = 2; 4642 break; 4643 default: 4644 return -1; 4645 } 4646 4647 page_bytes = page_size * SLI_PAGE_SIZE; 4648 num_pages_cq = sli_page_count(qs[0]->dma.size, page_bytes); 4649 cmd_size = sizeof(sli4_req_common_create_cq_set_v0_t) + (8 * num_pages_cq * num_cqs); 4650 payload_size = max((size_t)cmd_size, sizeof(sli4_res_common_create_queue_set_t)); 4651 4652 if (ocs_dma_alloc(sli4->os, &dma, payload_size, SLI_PAGE_SIZE)) { 4653 ocs_log_err(sli4->os, "DMA allocation failed\n"); 4654 goto error; 4655 } 4656 ocs_memset(dma.virt, 0, payload_size); 4657 4658 if (sli_cmd_sli_config(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, 4659 payload_size, &dma) == -1) { 4660 goto error; 4661 } 4662 4663 /* Fill the request structure */ 4664 4665 req = (sli4_req_common_create_cq_set_v0_t *)((uint8_t *)dma.virt); 4666 req->hdr.opcode = SLI4_OPC_COMMON_CREATE_CQ_SET; 4667 req->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 4668 req->hdr.version = 0; 4669 req->hdr.request_length = cmd_size - sizeof(sli4_req_hdr_t); 4670 req->page_size = page_size; 4671 4672 req->num_pages = num_pages_cq; 4673 switch (req->num_pages) { 4674 case 1: 4675 req->cqecnt = SLI4_CQ_CNT_256; 4676 break; 4677 case 2: 4678 req->cqecnt = SLI4_CQ_CNT_512; 4679 break; 4680 case 4: 4681 req->cqecnt = SLI4_CQ_CNT_1024; 4682 break; 4683 case 8: 4684 req->cqecnt = SLI4_CQ_CNT_LARGE; 4685 req->cqe_count = n_cqe; 4686 break; 4687 default: 4688 ocs_log_test(sli4->os, "num_pages %d not valid\n", req->num_pages); 4689 goto error; 4690 } 4691 4692 req->evt = TRUE; 4693 req->valid = TRUE; 4694 req->arm = FALSE; 4695 req->num_cq_req = num_cqs; 4696 4697 /* Fill page addresses of all the CQs. */ 4698 for (i = 0; i < num_cqs; i++) { 4699 req->eq_id[i] = eqs[i]->id; 4700 for (p = 0, addr = qs[i]->dma.phys; p < req->num_pages; p++, addr += page_bytes) { 4701 req->page_physical_address[offset].low = ocs_addr32_lo(addr); 4702 req->page_physical_address[offset].high = ocs_addr32_hi(addr); 4703 offset++; 4704 } 4705 } 4706 4707 if (sli_bmbx_command(sli4)) { 4708 ocs_log_crit(sli4->os, "bootstrap mailbox write fail CQSet\n"); 4709 goto error; 4710 } 4711 4712 res = (void *)((uint8_t *)dma.virt); 4713 if (res->hdr.status) { 4714 ocs_log_err(sli4->os, "bad create CQSet status=%#x addl=%#x\n", 4715 res->hdr.status, res->hdr.additional_status); 4716 goto error; 4717 } else { 4718 /* Check if we got all requested CQs. */ 4719 if (res->num_q_allocated != num_cqs) { 4720 ocs_log_crit(sli4->os, "Requested count CQs doesnt match.\n"); 4721 goto error; 4722 } 4723 4724 /* Fill the resp cq ids. */ 4725 for (i = 0; i < num_cqs; i++) { 4726 qs[i]->id = res->q_id + i; 4727 qs[i]->doorbell_offset = regmap[SLI4_REG_EQCQ_DOORBELL][sli4->if_type].off; 4728 qs[i]->doorbell_rset = regmap[SLI4_REG_EQCQ_DOORBELL][sli4->if_type].rset; 4729 } 4730 } 4731 4732 ocs_dma_free(sli4->os, &dma); 4733 4734 return 0; 4735 4736error: 4737 for (i = 0; i < num_cqs; i++) { 4738 if (qs[i]->dma.size) { 4739 ocs_dma_free(sli4->os, &qs[i]->dma); 4740 } 4741 } 4742 4743 if (dma.size) { 4744 ocs_dma_free(sli4->os, &dma); 4745 } 4746 4747 return -1; 4748} 4749 4750/** 4751 * @ingroup sli 4752 * @brief Free a queue. 4753 * 4754 * @par Description 4755 * Frees DMA memory and de-registers the requested queue. 4756 * 4757 * @param sli4 SLI context. 4758 * @param q Pointer to the queue object. 4759 * @param destroy_queues Non-zero if the mailbox commands should be sent to destroy the queues. 4760 * @param free_memory Non-zero if the DMA memory associated with the queue should be freed. 4761 * 4762 * @return Returns 0 on success, or -1 otherwise. 4763 */ 4764int32_t 4765sli_queue_free(sli4_t *sli4, sli4_queue_t *q, uint32_t destroy_queues, uint32_t free_memory) 4766{ 4767 sli4_destroy_q_fn_t destroy = NULL; 4768 int32_t rc = -1; 4769 4770 if (!sli4 || !q) { 4771 ocs_log_err(NULL, "bad parameter sli4=%p q=%p\n", sli4, q); 4772 return -1; 4773 } 4774 4775 if (destroy_queues) { 4776 switch (q->type) { 4777 case SLI_QTYPE_EQ: 4778 destroy = sli_cmd_common_destroy_eq; 4779 break; 4780 case SLI_QTYPE_CQ: 4781 destroy = sli_cmd_common_destroy_cq; 4782 break; 4783 case SLI_QTYPE_MQ: 4784 destroy = sli_cmd_common_destroy_mq; 4785 break; 4786 case SLI_QTYPE_WQ: 4787 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 4788 destroy = sli_cmd_fcoe_wq_destroy; 4789 } else { 4790 /* TODO */ 4791 ocs_log_test(sli4->os, "unsupported WQ destroy\n"); 4792 return -1; 4793 } 4794 break; 4795 case SLI_QTYPE_RQ: 4796 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 4797 destroy = sli_cmd_fcoe_rq_destroy; 4798 } else { 4799 /* TODO */ 4800 ocs_log_test(sli4->os, "unsupported RQ destroy\n"); 4801 return -1; 4802 } 4803 break; 4804 default: 4805 ocs_log_test(sli4->os, "bad queue type %d\n", 4806 q->type); 4807 return -1; 4808 } 4809 4810 /* 4811 * Destroying queues makes BE3 sad (version 0 interface type). Rely 4812 * on COMMON_FUNCTION_RESET to free host allocated queue resources 4813 * inside the SLI Port. 4814 */ 4815 if (SLI4_IF_TYPE_BE3_SKH_PF == sli4->if_type) { 4816 destroy = NULL; 4817 } 4818 4819 /* Destroy the queue if the operation is defined */ 4820 if (destroy && destroy(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, q->id)) { 4821 sli4_res_hdr_t *res = NULL; 4822 4823 if (sli_bmbx_command(sli4)){ 4824 ocs_log_crit(sli4->os, "bootstrap mailbox write fail destroy %s\n", 4825 SLI_QNAME[q->type]); 4826 } else if (sli_res_sli_config(sli4->bmbx.virt)) { 4827 ocs_log_err(sli4->os, "bad status destroy %s\n", SLI_QNAME[q->type]); 4828 } else { 4829 res = (void *)((uint8_t *)sli4->bmbx.virt + 4830 offsetof(sli4_cmd_sli_config_t, payload)); 4831 4832 if (res->status) { 4833 ocs_log_err(sli4->os, "bad destroy %s status=%#x addl=%#x\n", 4834 SLI_QNAME[q->type], 4835 res->status, res->additional_status); 4836 } else { 4837 rc = 0; 4838 } 4839 } 4840 } 4841 } 4842 4843 if (free_memory) { 4844 ocs_lock_free(&q->lock); 4845 4846 if (ocs_dma_free(sli4->os, &q->dma)) { 4847 ocs_log_err(sli4->os, "%s queue ID %d free failed\n", 4848 SLI_QNAME[q->type], q->id); 4849 rc = -1; 4850 } 4851 } 4852 4853 return rc; 4854} 4855 4856int32_t 4857sli_queue_reset(sli4_t *sli4, sli4_queue_t *q) 4858{ 4859 4860 ocs_lock(&q->lock); 4861 4862 q->index = 0; 4863 q->n_posted = 0; 4864 4865 if (SLI_QTYPE_MQ == q->type) { 4866 q->u.r_idx = 0; 4867 } 4868 4869 if (q->dma.virt != NULL) { 4870 ocs_memset(q->dma.virt, 0, (q->size * (uint64_t)q->length)); 4871 } 4872 4873 ocs_unlock(&q->lock); 4874 4875 return 0; 4876} 4877 4878/** 4879 * @ingroup sli 4880 * @brief Check if the given queue is empty. 4881 * 4882 * @par Description 4883 * If the valid bit of the current entry is unset, the queue is empty. 4884 * 4885 * @param sli4 SLI context. 4886 * @param q Pointer to the queue object. 4887 * 4888 * @return Returns TRUE if empty, or FALSE otherwise. 4889 */ 4890int32_t 4891sli_queue_is_empty(sli4_t *sli4, sli4_queue_t *q) 4892{ 4893 int32_t rc = TRUE; 4894 uint8_t *qe = q->dma.virt; 4895 4896 ocs_lock(&q->lock); 4897 4898 ocs_dma_sync(&q->dma, OCS_DMASYNC_POSTREAD); 4899 4900 qe += q->index * q->size; 4901 4902 rc = !sli_queue_entry_is_valid(q, qe, FALSE); 4903 4904 ocs_unlock(&q->lock); 4905 4906 return rc; 4907} 4908 4909/** 4910 * @ingroup sli 4911 * @brief Arm an EQ. 4912 * 4913 * @param sli4 SLI context. 4914 * @param q Pointer to queue object. 4915 * @param arm If TRUE, arm the EQ. 4916 * 4917 * @return Returns 0 on success, or non-zero otherwise. 4918 */ 4919int32_t 4920sli_queue_eq_arm(sli4_t *sli4, sli4_queue_t *q, uint8_t arm) 4921{ 4922 uint32_t val = 0; 4923 4924 ocs_lock(&q->lock); 4925 val = sli_eq_doorbell(q->n_posted, q->id, arm); 4926 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 4927 q->n_posted = 0; 4928 ocs_unlock(&q->lock); 4929 4930 return 0; 4931} 4932 4933/** 4934 * @ingroup sli 4935 * @brief Arm a queue. 4936 * 4937 * @param sli4 SLI context. 4938 * @param q Pointer to queue object. 4939 * @param arm If TRUE, arm the queue. 4940 * 4941 * @return Returns 0 on success, or non-zero otherwise. 4942 */ 4943int32_t 4944sli_queue_arm(sli4_t *sli4, sli4_queue_t *q, uint8_t arm) 4945{ 4946 uint32_t val = 0; 4947 4948 ocs_lock(&q->lock); 4949 4950 switch (q->type) { 4951 case SLI_QTYPE_EQ: 4952 val = sli_eq_doorbell(q->n_posted, q->id, arm); 4953 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 4954 q->n_posted = 0; 4955 break; 4956 case SLI_QTYPE_CQ: 4957 val = sli_cq_doorbell(q->n_posted, q->id, arm); 4958 ocs_reg_write32(sli4->os, q->doorbell_rset, q->doorbell_offset, val); 4959 q->n_posted = 0; 4960 break; 4961 default: 4962 ocs_log_test(sli4->os, "should only be used for EQ/CQ, not %s\n", 4963 SLI_QNAME[q->type]); 4964 } 4965 4966 ocs_unlock(&q->lock); 4967 4968 return 0; 4969} 4970 4971/** 4972 * @ingroup sli 4973 * @brief Write an entry to the queue object. 4974 * 4975 * Note: Assumes the q->lock will be locked and released by the caller. 4976 * 4977 * @param sli4 SLI context. 4978 * @param q Pointer to the queue object. 4979 * @param entry Pointer to the entry contents. 4980 * 4981 * @return Returns queue index on success, or negative error value otherwise. 4982 */ 4983int32_t 4984_sli_queue_write(sli4_t *sli4, sli4_queue_t *q, uint8_t *entry) 4985{ 4986 int32_t rc = 0; 4987 uint8_t *qe = q->dma.virt; 4988 uint32_t qindex; 4989 4990 qindex = q->index; 4991 qe += q->index * q->size; 4992 4993 if (entry) { 4994 if ((SLI_QTYPE_WQ == q->type) && sli4->config.perf_wq_id_association) { 4995 sli_set_wq_id_association(entry, q->id); 4996 } 4997#if defined(OCS_INCLUDE_DEBUG) 4998 switch (q->type) { 4999 case SLI_QTYPE_WQ: { 5000 ocs_dump32(OCS_DEBUG_ENABLE_WQ_DUMP, sli4->os, "wqe", entry, q->size); 5001 break; 5002 } 5003 case SLI_QTYPE_MQ: 5004 /* Note: we don't really need to dump the whole 5005 * 256 bytes, just do 64 */ 5006 ocs_dump32(OCS_DEBUG_ENABLE_MQ_DUMP, sli4->os, "mqe outbound", entry, 64); 5007 break; 5008 5009 default: 5010 break; 5011 } 5012#endif 5013 ocs_memcpy(qe, entry, q->size); 5014 q->n_posted = 1; 5015 } 5016 5017 ocs_dma_sync(&q->dma, OCS_DMASYNC_PREWRITE); 5018 5019 rc = sli_queue_doorbell(sli4, q); 5020 5021 q->index = (q->index + q->n_posted) & (q->length - 1); 5022 q->n_posted = 0; 5023 5024 if (rc < 0) { 5025 /* failure */ 5026 return rc; 5027 } else if (rc > 0) { 5028 /* failure, but we need to return a negative value on failure */ 5029 return -rc; 5030 } else { 5031 return qindex; 5032 } 5033} 5034 5035/** 5036 * @ingroup sli 5037 * @brief Write an entry to the queue object. 5038 * 5039 * Note: Assumes the q->lock will be locked and released by the caller. 5040 * 5041 * @param sli4 SLI context. 5042 * @param q Pointer to the queue object. 5043 * @param entry Pointer to the entry contents. 5044 * 5045 * @return Returns queue index on success, or negative error value otherwise. 5046 */ 5047int32_t 5048sli_queue_write(sli4_t *sli4, sli4_queue_t *q, uint8_t *entry) 5049{ 5050 int32_t rc; 5051 5052 ocs_lock(&q->lock); 5053 rc = _sli_queue_write(sli4, q, entry); 5054 ocs_unlock(&q->lock); 5055 5056 return rc; 5057} 5058 5059/** 5060 * @brief Check if the current queue entry is valid. 5061 * 5062 * @param q Pointer to the queue object. 5063 * @param qe Pointer to the queue entry. 5064 * @param clear Boolean to clear valid bit. 5065 * 5066 * @return Returns TRUE if the entry is valid, or FALSE otherwise. 5067 */ 5068static uint8_t 5069sli_queue_entry_is_valid(sli4_queue_t *q, uint8_t *qe, uint8_t clear) 5070{ 5071 uint8_t valid = FALSE; 5072 5073 switch (q->type) { 5074 case SLI_QTYPE_EQ: 5075 valid = ((sli4_eqe_t *)qe)->vld; 5076 if (valid && clear) { 5077 ((sli4_eqe_t *)qe)->vld = 0; 5078 } 5079 break; 5080 case SLI_QTYPE_CQ: 5081 /* 5082 * For both MCQE and WCQE/RCQE, the valid bit 5083 * is bit 31 of dword 3 (0 based) 5084 */ 5085 valid = (qe[15] & 0x80) != 0; 5086 if (valid & clear) { 5087 qe[15] &= ~0x80; 5088 } 5089 break; 5090 case SLI_QTYPE_MQ: 5091 valid = q->index != q->u.r_idx; 5092 break; 5093 case SLI_QTYPE_RQ: 5094 valid = TRUE; 5095 clear = FALSE; 5096 break; 5097 default: 5098 ocs_log_test(NULL, "doesn't handle type=%#x\n", q->type); 5099 } 5100 5101 if (clear) { 5102 ocs_dma_sync(&q->dma, OCS_DMASYNC_PREWRITE); 5103 } 5104 5105 return valid; 5106} 5107 5108/** 5109 * @ingroup sli 5110 * @brief Read an entry from the queue object. 5111 * 5112 * @param sli4 SLI context. 5113 * @param q Pointer to the queue object. 5114 * @param entry Destination pointer for the queue entry contents. 5115 * 5116 * @return Returns 0 on success, or non-zero otherwise. 5117 */ 5118int32_t 5119sli_queue_read(sli4_t *sli4, sli4_queue_t *q, uint8_t *entry) 5120{ 5121 int32_t rc = 0; 5122 uint8_t *qe = q->dma.virt; 5123 uint32_t *qindex = NULL; 5124 5125 if (SLI_QTYPE_MQ == q->type) { 5126 qindex = &q->u.r_idx; 5127 } else { 5128 qindex = &q->index; 5129 } 5130 5131 ocs_lock(&q->lock); 5132 5133 ocs_dma_sync(&q->dma, OCS_DMASYNC_POSTREAD); 5134 5135 qe += *qindex * q->size; 5136 5137 if (!sli_queue_entry_is_valid(q, qe, TRUE)) { 5138 ocs_unlock(&q->lock); 5139 return -1; 5140 } 5141 5142 if (entry) { 5143 ocs_memcpy(entry, qe, q->size); 5144#if defined(OCS_INCLUDE_DEBUG) 5145 switch(q->type) { 5146 case SLI_QTYPE_CQ: 5147 ocs_dump32(OCS_DEBUG_ENABLE_CQ_DUMP, sli4->os, "cq", entry, q->size); 5148 break; 5149 case SLI_QTYPE_MQ: 5150 ocs_dump32(OCS_DEBUG_ENABLE_MQ_DUMP, sli4->os, "mq Compl", entry, 64); 5151 break; 5152 case SLI_QTYPE_EQ: 5153 ocs_dump32(OCS_DEBUG_ENABLE_EQ_DUMP, sli4->os, "eq Compl", entry, q->size); 5154 break; 5155 default: 5156 break; 5157 } 5158#endif 5159 } 5160 5161 switch (q->type) { 5162 case SLI_QTYPE_EQ: 5163 case SLI_QTYPE_CQ: 5164 case SLI_QTYPE_MQ: 5165 *qindex = (*qindex + 1) & (q->length - 1); 5166 if (SLI_QTYPE_MQ != q->type) { 5167 q->n_posted++; 5168 } 5169 break; 5170 default: 5171 /* reads don't update the index */ 5172 break; 5173 } 5174 5175 ocs_unlock(&q->lock); 5176 5177 return rc; 5178} 5179 5180int32_t 5181sli_queue_index(sli4_t *sli4, sli4_queue_t *q) 5182{ 5183 5184 if (q) { 5185 return q->index; 5186 } else { 5187 return -1; 5188 } 5189} 5190 5191int32_t 5192sli_queue_poke(sli4_t *sli4, sli4_queue_t *q, uint32_t index, uint8_t *entry) 5193{ 5194 int32_t rc; 5195 5196 ocs_lock(&q->lock); 5197 rc = _sli_queue_poke(sli4, q, index, entry); 5198 ocs_unlock(&q->lock); 5199 5200 return rc; 5201} 5202 5203int32_t 5204_sli_queue_poke(sli4_t *sli4, sli4_queue_t *q, uint32_t index, uint8_t *entry) 5205{ 5206 int32_t rc = 0; 5207 uint8_t *qe = q->dma.virt; 5208 5209 if (index >= q->length) { 5210 return -1; 5211 } 5212 5213 qe += index * q->size; 5214 5215 if (entry) { 5216 ocs_memcpy(qe, entry, q->size); 5217 } 5218 5219 ocs_dma_sync(&q->dma, OCS_DMASYNC_PREWRITE); 5220 5221 return rc; 5222} 5223 5224/** 5225 * @ingroup sli 5226 * @brief Allocate SLI Port resources. 5227 * 5228 * @par Description 5229 * Allocate port-related resources, such as VFI, RPI, XRI, and so on. 5230 * Resources are modeled using extents, regardless of whether the underlying 5231 * device implements resource extents. If the device does not implement 5232 * extents, the SLI layer models this as a single (albeit large) extent. 5233 * 5234 * @param sli4 SLI context. 5235 * @param rtype Resource type (for example, RPI or XRI) 5236 * @param rid Allocated resource ID. 5237 * @param index Index into the bitmap. 5238 * 5239 * @return Returns 0 on success, or a non-zero value on failure. 5240 */ 5241int32_t 5242sli_resource_alloc(sli4_t *sli4, sli4_resource_e rtype, uint32_t *rid, uint32_t *index) 5243{ 5244 int32_t rc = 0; 5245 uint32_t size; 5246 uint32_t extent_idx; 5247 uint32_t item_idx; 5248 int status; 5249 5250 *rid = UINT32_MAX; 5251 *index = UINT32_MAX; 5252 5253 switch (rtype) { 5254 case SLI_RSRC_FCOE_VFI: 5255 case SLI_RSRC_FCOE_VPI: 5256 case SLI_RSRC_FCOE_RPI: 5257 case SLI_RSRC_FCOE_XRI: 5258 status = ocs_bitmap_find(sli4->config.extent[rtype].use_map, 5259 sli4->config.extent[rtype].map_size); 5260 if (status < 0) { 5261 ocs_log_err(sli4->os, "out of resource %d (alloc=%d)\n", 5262 rtype, sli4->config.extent[rtype].n_alloc); 5263 rc = -1; 5264 break; 5265 } else { 5266 *index = status; 5267 } 5268 5269 size = sli4->config.extent[rtype].size; 5270 5271 extent_idx = *index / size; 5272 item_idx = *index % size; 5273 5274 *rid = sli4->config.extent[rtype].base[extent_idx] + item_idx; 5275 5276 sli4->config.extent[rtype].n_alloc++; 5277 break; 5278 default: 5279 rc = -1; 5280 } 5281 5282 return rc; 5283} 5284 5285/** 5286 * @ingroup sli 5287 * @brief Free the SLI Port resources. 5288 * 5289 * @par Description 5290 * Free port-related resources, such as VFI, RPI, XRI, and so. See discussion of 5291 * "extent" usage in sli_resource_alloc. 5292 * 5293 * @param sli4 SLI context. 5294 * @param rtype Resource type (for example, RPI or XRI). 5295 * @param rid Allocated resource ID. 5296 * 5297 * @return Returns 0 on success, or a non-zero value on failure. 5298 */ 5299int32_t 5300sli_resource_free(sli4_t *sli4, sli4_resource_e rtype, uint32_t rid) 5301{ 5302 int32_t rc = -1; 5303 uint32_t x; 5304 uint32_t size, *base; 5305 5306 switch (rtype) { 5307 case SLI_RSRC_FCOE_VFI: 5308 case SLI_RSRC_FCOE_VPI: 5309 case SLI_RSRC_FCOE_RPI: 5310 case SLI_RSRC_FCOE_XRI: 5311 /* 5312 * Figure out which extent contains the resource ID. I.e. find 5313 * the extent such that 5314 * extent->base <= resource ID < extent->base + extent->size 5315 */ 5316 base = sli4->config.extent[rtype].base; 5317 size = sli4->config.extent[rtype].size; 5318 5319 /* 5320 * In the case of FW reset, this may be cleared but the force_free path will 5321 * still attempt to free the resource. Prevent a NULL pointer access. 5322 */ 5323 if (base != NULL) { 5324 for (x = 0; x < sli4->config.extent[rtype].number; x++) { 5325 if ((rid >= base[x]) && (rid < (base[x] + size))) { 5326 rid -= base[x]; 5327 ocs_bitmap_clear(sli4->config.extent[rtype].use_map, 5328 (x * size) + rid); 5329 rc = 0; 5330 break; 5331 } 5332 } 5333 } 5334 break; 5335 default: 5336 ; 5337 } 5338 5339 return rc; 5340} 5341 5342int32_t 5343sli_resource_reset(sli4_t *sli4, sli4_resource_e rtype) 5344{ 5345 int32_t rc = -1; 5346 uint32_t i; 5347 5348 switch (rtype) { 5349 case SLI_RSRC_FCOE_VFI: 5350 case SLI_RSRC_FCOE_VPI: 5351 case SLI_RSRC_FCOE_RPI: 5352 case SLI_RSRC_FCOE_XRI: 5353 for (i = 0; i < sli4->config.extent[rtype].map_size; i++) { 5354 ocs_bitmap_clear(sli4->config.extent[rtype].use_map, i); 5355 } 5356 rc = 0; 5357 break; 5358 default: 5359 ; 5360 } 5361 5362 return rc; 5363} 5364 5365/** 5366 * @ingroup sli 5367 * @brief Parse an EQ entry to retrieve the CQ_ID for this event. 5368 * 5369 * @param sli4 SLI context. 5370 * @param buf Pointer to the EQ entry. 5371 * @param cq_id CQ_ID for this entry (only valid on success). 5372 * 5373 * @return 5374 * - 0 if success. 5375 * - < 0 if error. 5376 * - > 0 if firmware detects EQ overflow. 5377 */ 5378int32_t 5379sli_eq_parse(sli4_t *sli4, uint8_t *buf, uint16_t *cq_id) 5380{ 5381 sli4_eqe_t *eqe = (void *)buf; 5382 int32_t rc = 0; 5383 5384 if (!sli4 || !buf || !cq_id) { 5385 ocs_log_err(NULL, "bad parameters sli4=%p buf=%p cq_id=%p\n", 5386 sli4, buf, cq_id); 5387 return -1; 5388 } 5389 5390 switch (eqe->major_code) { 5391 case SLI4_MAJOR_CODE_STANDARD: 5392 *cq_id = eqe->resource_id; 5393 break; 5394 case SLI4_MAJOR_CODE_SENTINEL: 5395 ocs_log_debug(sli4->os, "sentinel EQE\n"); 5396 rc = 1; 5397 break; 5398 default: 5399 ocs_log_test(sli4->os, "Unsupported EQE: major %x minor %x\n", 5400 eqe->major_code, eqe->minor_code); 5401 rc = -1; 5402 } 5403 5404 return rc; 5405} 5406 5407/** 5408 * @ingroup sli 5409 * @brief Parse a CQ entry to retrieve the event type and the associated queue. 5410 * 5411 * @param sli4 SLI context. 5412 * @param cq CQ to process. 5413 * @param cqe Pointer to the CQ entry. 5414 * @param etype CQ event type. 5415 * @param q_id Queue ID associated with this completion message 5416 * (that is, MQ_ID, RQ_ID, and so on). 5417 * 5418 * @return 5419 * - 0 if call completed correctly and CQE status is SUCCESS. 5420 * - -1 if call failed (no CQE status). 5421 * - Other value if call completed correctly and return value is a CQE status value. 5422 */ 5423int32_t 5424sli_cq_parse(sli4_t *sli4, sli4_queue_t *cq, uint8_t *cqe, sli4_qentry_e *etype, 5425 uint16_t *q_id) 5426{ 5427 int32_t rc = 0; 5428 5429 if (!sli4 || !cq || !cqe || !etype) { 5430 ocs_log_err(NULL, "bad parameters sli4=%p cq=%p cqe=%p etype=%p q_id=%p\n", 5431 sli4, cq, cqe, etype, q_id); 5432 return -1; 5433 } 5434 5435 if (cq->u.flag.is_mq) { 5436 sli4_mcqe_t *mcqe = (void *)cqe; 5437 5438 if (mcqe->ae) { 5439 *etype = SLI_QENTRY_ASYNC; 5440 } else { 5441 *etype = SLI_QENTRY_MQ; 5442 rc = sli_cqe_mq(mcqe); 5443 } 5444 *q_id = -1; 5445 } else if (SLI4_PORT_TYPE_FC == sli4->port_type) { 5446 rc = sli_fc_cqe_parse(sli4, cq, cqe, etype, q_id); 5447 } else { 5448 ocs_log_test(sli4->os, "implement CQE parsing type = %#x\n", 5449 sli4->port_type); 5450 rc = -1; 5451 } 5452 5453 return rc; 5454} 5455 5456/** 5457 * @ingroup sli 5458 * @brief Cause chip to enter an unrecoverable error state. 5459 * 5460 * @par Description 5461 * Cause chip to enter an unrecoverable error state. This is 5462 * used when detecting unexpected FW behavior so FW can be 5463 * hwted from the driver as soon as error is detected. 5464 * 5465 * @param sli4 SLI context. 5466 * @param dump Generate dump as part of reset. 5467 * 5468 * @return Returns 0 if call completed correctly, or -1 if call failed (unsupported chip). 5469 */ 5470int32_t sli_raise_ue(sli4_t *sli4, uint8_t dump) 5471{ 5472#define FDD 2 5473 if (SLI4_IF_TYPE_BE3_SKH_PF == sli_get_if_type(sli4)) { 5474 switch(sli_get_asic_type(sli4)) { 5475 case SLI4_ASIC_TYPE_BE3: { 5476 sli_reg_write(sli4, SLI4_REG_SW_UE_CSR1, 0xffffffff); 5477 sli_reg_write(sli4, SLI4_REG_SW_UE_CSR2, 0); 5478 break; 5479 } 5480 case SLI4_ASIC_TYPE_SKYHAWK: { 5481 uint32_t value; 5482 value = ocs_config_read32(sli4->os, SLI4_SW_UE_REG); 5483 ocs_config_write32(sli4->os, SLI4_SW_UE_REG, (value | (1U << 24))); 5484 break; 5485 } 5486 default: 5487 ocs_log_test(sli4->os, "invalid asic type %d\n", sli_get_asic_type(sli4)); 5488 return -1; 5489 } 5490 } else if (SLI4_IF_TYPE_LANCER_FC_ETH == sli_get_if_type(sli4)) { 5491 if (dump == FDD) { 5492 sli_reg_write(sli4, SLI4_REG_SLIPORT_CONTROL, SLI4_SLIPORT_CONTROL_FDD | SLI4_SLIPORT_CONTROL_IP); 5493 } else { 5494 uint32_t value = SLI4_PHYDEV_CONTROL_FRST; 5495 if (dump == 1) { 5496 value |= SLI4_PHYDEV_CONTROL_DD; 5497 } 5498 sli_reg_write(sli4, SLI4_REG_PHYSDEV_CONTROL, value); 5499 } 5500 } else { 5501 ocs_log_test(sli4->os, "invalid iftype=%d\n", sli_get_if_type(sli4)); 5502 return -1; 5503 } 5504 return 0; 5505} 5506 5507/** 5508 * @ingroup sli 5509 * @brief Read the SLIPORT_STATUS register to to check if a dump is present. 5510 * 5511 * @param sli4 SLI context. 5512 * 5513 * @return Returns 1 if the chip is ready, or 0 if the chip is not ready, 2 if fdp is present. 5514 */ 5515int32_t sli_dump_is_ready(sli4_t *sli4) 5516{ 5517 int32_t rc = 0; 5518 uint32_t port_val; 5519 uint32_t bmbx_val; 5520 uint32_t uerr_lo; 5521 uint32_t uerr_hi; 5522 uint32_t uerr_mask_lo; 5523 uint32_t uerr_mask_hi; 5524 5525 if (SLI4_IF_TYPE_BE3_SKH_PF == sli_get_if_type(sli4)) { 5526 /* for iftype=0, dump ready when UE is encountered */ 5527 uerr_lo = sli_reg_read(sli4, SLI4_REG_UERR_STATUS_LO); 5528 uerr_hi = sli_reg_read(sli4, SLI4_REG_UERR_STATUS_HI); 5529 uerr_mask_lo = sli_reg_read(sli4, SLI4_REG_UERR_MASK_LO); 5530 uerr_mask_hi = sli_reg_read(sli4, SLI4_REG_UERR_MASK_HI); 5531 if ((uerr_lo & ~uerr_mask_lo) || (uerr_hi & ~uerr_mask_hi)) { 5532 rc = 1; 5533 } 5534 5535 } else if (SLI4_IF_TYPE_LANCER_FC_ETH == sli_get_if_type(sli4)) { 5536 /* 5537 * Ensure that the port is ready AND the mailbox is 5538 * ready before signaling that the dump is ready to go. 5539 */ 5540 port_val = sli_reg_read(sli4, SLI4_REG_SLIPORT_STATUS); 5541 bmbx_val = sli_reg_read(sli4, SLI4_REG_BMBX); 5542 5543 if ((bmbx_val & SLI4_BMBX_RDY) && 5544 SLI4_PORT_STATUS_READY(port_val)) { 5545 if(SLI4_PORT_STATUS_DUMP_PRESENT(port_val)) { 5546 rc = 1; 5547 }else if( SLI4_PORT_STATUS_FDP_PRESENT(port_val)) { 5548 rc = 2; 5549 } 5550 } 5551 } else { 5552 ocs_log_test(sli4->os, "invalid iftype=%d\n", sli_get_if_type(sli4)); 5553 return -1; 5554 } 5555 return rc; 5556} 5557 5558/** 5559 * @ingroup sli 5560 * @brief Read the SLIPORT_STATUS register to check if a dump is present. 5561 * 5562 * @param sli4 SLI context. 5563 * 5564 * @return 5565 * - 0 if call completed correctly and no dump is present. 5566 * - 1 if call completed and dump is present. 5567 * - -1 if call failed (unsupported chip). 5568 */ 5569int32_t sli_dump_is_present(sli4_t *sli4) 5570{ 5571 uint32_t val; 5572 uint32_t ready; 5573 5574 if (SLI4_IF_TYPE_LANCER_FC_ETH != sli_get_if_type(sli4)) { 5575 ocs_log_test(sli4->os, "Function only supported for I/F type 2"); 5576 return -1; 5577 } 5578 5579 /* If the chip is not ready, then there cannot be a dump */ 5580 ready = sli_wait_for_fw_ready(sli4, SLI4_INIT_PORT_DELAY_US); 5581 if (!ready) { 5582 return 0; 5583 } 5584 5585 val = sli_reg_read(sli4, SLI4_REG_SLIPORT_STATUS); 5586 if (UINT32_MAX == val) { 5587 ocs_log_err(sli4->os, "error reading SLIPORT_STATUS\n"); 5588 return -1; 5589 } else { 5590 return ((val & SLI4_PORT_STATUS_DIP) ? 1 : 0); 5591 } 5592} 5593 5594/** 5595 * @ingroup sli 5596 * @brief Read the SLIPORT_STATUS register to check if the reset required is set. 5597 * 5598 * @param sli4 SLI context. 5599 * 5600 * @return 5601 * - 0 if call completed correctly and reset is not required. 5602 * - 1 if call completed and reset is required. 5603 * - -1 if call failed. 5604 */ 5605int32_t sli_reset_required(sli4_t *sli4) 5606{ 5607 uint32_t val; 5608 5609 if (SLI4_IF_TYPE_BE3_SKH_PF == sli_get_if_type(sli4)) { 5610 ocs_log_test(sli4->os, "reset required N/A for iftype 0\n"); 5611 return 0; 5612 } 5613 5614 val = sli_reg_read(sli4, SLI4_REG_SLIPORT_STATUS); 5615 if (UINT32_MAX == val) { 5616 ocs_log_err(sli4->os, "error reading SLIPORT_STATUS\n"); 5617 return -1; 5618 } else { 5619 return ((val & SLI4_PORT_STATUS_RN) ? 1 : 0); 5620 } 5621} 5622 5623/** 5624 * @ingroup sli 5625 * @brief Read the SLIPORT_SEMAPHORE and SLIPORT_STATUS registers to check if 5626 * the port status indicates that a FW error has occurred. 5627 * 5628 * @param sli4 SLI context. 5629 * 5630 * @return 5631 * - 0 if call completed correctly and no FW error occurred. 5632 * - > 0 which indicates that a FW error has occurred. 5633 * - -1 if call failed. 5634 */ 5635int32_t sli_fw_error_status(sli4_t *sli4) 5636{ 5637 uint32_t sliport_semaphore; 5638 int32_t rc = 0; 5639 5640 sliport_semaphore = sli_reg_read(sli4, SLI4_REG_SLIPORT_SEMAPHORE); 5641 if (UINT32_MAX == sliport_semaphore) { 5642 ocs_log_err(sli4->os, "error reading SLIPORT_SEMAPHORE register\n"); 5643 return 1; 5644 } 5645 rc = (SLI4_PORT_SEMAPHORE_IN_ERR(sliport_semaphore) ? 1 : 0); 5646 5647 if (rc == 0) { 5648 if (SLI4_IF_TYPE_BE3_SKH_PF == sli4->if_type || 5649 (SLI4_IF_TYPE_BE3_SKH_VF == sli4->if_type)) { 5650 uint32_t uerr_mask_lo, uerr_mask_hi; 5651 uint32_t uerr_status_lo, uerr_status_hi; 5652 5653 uerr_mask_lo = sli_reg_read(sli4, SLI4_REG_UERR_MASK_LO); 5654 uerr_mask_hi = sli_reg_read(sli4, SLI4_REG_UERR_MASK_HI); 5655 uerr_status_lo = sli_reg_read(sli4, SLI4_REG_UERR_STATUS_LO); 5656 uerr_status_hi = sli_reg_read(sli4, SLI4_REG_UERR_STATUS_HI); 5657 if ((uerr_mask_lo & uerr_status_lo) != 0 || 5658 (uerr_mask_hi & uerr_status_hi) != 0) { 5659 rc = 1; 5660 } 5661 } else if ((SLI4_IF_TYPE_LANCER_FC_ETH == sli4->if_type)) { 5662 uint32_t sliport_status; 5663 5664 sliport_status = sli_reg_read(sli4, SLI4_REG_SLIPORT_STATUS); 5665 rc = (SLI4_PORT_STATUS_ERROR(sliport_status) ? 1 : 0); 5666 } 5667 } 5668 return rc; 5669} 5670 5671/** 5672 * @ingroup sli 5673 * @brief Determine if the chip FW is in a ready state 5674 * 5675 * @param sli4 SLI context. 5676 * 5677 * @return 5678 * - 0 if call completed correctly and FW is not ready. 5679 * - 1 if call completed correctly and FW is ready. 5680 * - -1 if call failed. 5681 */ 5682int32_t 5683sli_fw_ready(sli4_t *sli4) 5684{ 5685 uint32_t val; 5686 int32_t rc = -1; 5687 5688 /* 5689 * Is firmware ready for operation? Check needed depends on IF_TYPE 5690 */ 5691 if (SLI4_IF_TYPE_BE3_SKH_PF == sli4->if_type || 5692 SLI4_IF_TYPE_BE3_SKH_VF == sli4->if_type) { 5693 val = sli_reg_read(sli4, SLI4_REG_SLIPORT_SEMAPHORE); 5694 rc = ((SLI4_PORT_SEMAPHORE_STATUS_POST_READY == 5695 SLI4_PORT_SEMAPHORE_PORT(val)) && 5696 (!SLI4_PORT_SEMAPHORE_IN_ERR(val)) ? 1 : 0); 5697 } else if (SLI4_IF_TYPE_LANCER_FC_ETH == sli4->if_type) { 5698 val = sli_reg_read(sli4, SLI4_REG_SLIPORT_STATUS); 5699 rc = (SLI4_PORT_STATUS_READY(val) ? 1 : 0); 5700 } 5701 return rc; 5702} 5703 5704/** 5705 * @ingroup sli 5706 * @brief Determine if the link can be configured 5707 * 5708 * @param sli4 SLI context. 5709 * 5710 * @return 5711 * - 0 if link is not configurable. 5712 * - 1 if link is configurable. 5713 */ 5714int32_t sli_link_is_configurable(sli4_t *sli) 5715{ 5716 int32_t rc = 0; 5717 /* 5718 * Link config works on: Skyhawk and Lancer 5719 * Link config does not work on: LancerG6 5720 */ 5721 5722 switch (sli_get_asic_type(sli)) { 5723 case SLI4_ASIC_TYPE_SKYHAWK: 5724 case SLI4_ASIC_TYPE_LANCER: 5725 case SLI4_ASIC_TYPE_CORSAIR: 5726 rc = 1; 5727 break; 5728 case SLI4_ASIC_TYPE_LANCERG6: 5729 case SLI4_ASIC_TYPE_BE3: 5730 default: 5731 rc = 0; 5732 break; 5733 } 5734 5735 return rc; 5736 5737} 5738 5739/* vim: set noexpandtab textwidth=120: */ 5740 5741/** 5742 * @ingroup sli_fc 5743 * @brief Write an FCOE_WQ_CREATE command. 5744 * 5745 * @param sli4 SLI context. 5746 * @param buf Destination buffer for the command. 5747 * @param size Buffer size, in bytes. 5748 * @param qmem DMA memory for the queue. 5749 * @param cq_id Associated CQ_ID. 5750 * @param ulp The ULP to bind 5751 * 5752 * @note This creates a Version 0 message. 5753 * 5754 * @return Returns the number of bytes written. 5755 */ 5756int32_t 5757sli_cmd_fcoe_wq_create(sli4_t *sli4, void *buf, size_t size, 5758 ocs_dma_t *qmem, uint16_t cq_id, uint16_t ulp) 5759{ 5760 sli4_req_fcoe_wq_create_t *wq = NULL; 5761 uint32_t sli_config_off = 0; 5762 uint32_t p; 5763 uintptr_t addr; 5764 5765 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 5766 uint32_t payload_size; 5767 5768 /* Payload length must accommodate both request and response */ 5769 payload_size = max(sizeof(sli4_req_fcoe_wq_create_t), 5770 sizeof(sli4_res_common_create_queue_t)); 5771 5772 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 5773 NULL); 5774 } 5775 wq = (sli4_req_fcoe_wq_create_t *)((uint8_t *)buf + sli_config_off); 5776 5777 wq->hdr.opcode = SLI4_OPC_FCOE_WQ_CREATE; 5778 wq->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 5779 wq->hdr.request_length = sizeof(sli4_req_fcoe_wq_create_t) - 5780 sizeof(sli4_req_hdr_t); 5781 /* valid values for number of pages: 1-4 (sec 4.5.1) */ 5782 wq->num_pages = sli_page_count(qmem->size, SLI_PAGE_SIZE); 5783 if (!wq->num_pages || (wq->num_pages > SLI4_FCOE_WQ_CREATE_V0_MAX_PAGES)) { 5784 return 0; 5785 } 5786 5787 wq->cq_id = cq_id; 5788 5789 if (sli4->config.dual_ulp_capable) { 5790 wq->dua = 1; 5791 wq->bqu = 1; 5792 wq->ulp = ulp; 5793 } 5794 5795 for (p = 0, addr = qmem->phys; 5796 p < wq->num_pages; 5797 p++, addr += SLI_PAGE_SIZE) { 5798 wq->page_physical_address[p].low = ocs_addr32_lo(addr); 5799 wq->page_physical_address[p].high = ocs_addr32_hi(addr); 5800 } 5801 5802 return(sli_config_off + sizeof(sli4_req_fcoe_wq_create_t)); 5803} 5804 5805/** 5806 * @ingroup sli_fc 5807 * @brief Write an FCOE_WQ_CREATE_V1 command. 5808 * 5809 * @param sli4 SLI context. 5810 * @param buf Destination buffer for the command. 5811 * @param size Buffer size, in bytes. 5812 * @param qmem DMA memory for the queue. 5813 * @param cq_id Associated CQ_ID. 5814 * @param ignored This parameter carries the ULP for WQ (ignored for V1) 5815 5816 * 5817 * @return Returns the number of bytes written. 5818 */ 5819int32_t 5820sli_cmd_fcoe_wq_create_v1(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *qmem, 5821 uint16_t cq_id, uint16_t ignored) 5822{ 5823 sli4_req_fcoe_wq_create_v1_t *wq = NULL; 5824 uint32_t sli_config_off = 0; 5825 uint32_t p; 5826 uintptr_t addr; 5827 uint32_t page_size = 0; 5828 uint32_t page_bytes = 0; 5829 uint32_t n_wqe = 0; 5830 5831 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 5832 uint32_t payload_size; 5833 5834 /* Payload length must accommodate both request and response */ 5835 payload_size = max(sizeof(sli4_req_fcoe_wq_create_v1_t), 5836 sizeof(sli4_res_common_create_queue_t)); 5837 5838 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 5839 NULL); 5840 } 5841 wq = (sli4_req_fcoe_wq_create_v1_t *)((uint8_t *)buf + sli_config_off); 5842 5843 wq->hdr.opcode = SLI4_OPC_FCOE_WQ_CREATE; 5844 wq->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 5845 wq->hdr.request_length = sizeof(sli4_req_fcoe_wq_create_v1_t) - 5846 sizeof(sli4_req_hdr_t); 5847 wq->hdr.version = 1; 5848 5849 n_wqe = qmem->size / sli4->config.wqe_size; 5850 5851 /* This heuristic to determine the page size is simplistic 5852 * but could be made more sophisticated 5853 */ 5854 switch (qmem->size) { 5855 case 4096: 5856 case 8192: 5857 case 16384: 5858 case 32768: 5859 page_size = 1; 5860 break; 5861 case 65536: 5862 page_size = 2; 5863 break; 5864 case 131072: 5865 page_size = 4; 5866 break; 5867 case 262144: 5868 page_size = 8; 5869 break; 5870 case 524288: 5871 page_size = 10; 5872 break; 5873 default: 5874 return 0; 5875 } 5876 page_bytes = page_size * SLI_PAGE_SIZE; 5877 5878 /* valid values for number of pages: 1-8 */ 5879 wq->num_pages = sli_page_count(qmem->size, page_bytes); 5880 if (!wq->num_pages || (wq->num_pages > SLI4_FCOE_WQ_CREATE_V1_MAX_PAGES)) { 5881 return 0; 5882 } 5883 5884 wq->cq_id = cq_id; 5885 5886 wq->page_size = page_size; 5887 5888 if (sli4->config.wqe_size == SLI4_WQE_EXT_BYTES) { 5889 wq->wqe_size = SLI4_WQE_EXT_SIZE; 5890 } else { 5891 wq->wqe_size = SLI4_WQE_SIZE; 5892 } 5893 5894 wq->wqe_count = n_wqe; 5895 5896 for (p = 0, addr = qmem->phys; 5897 p < wq->num_pages; 5898 p++, addr += page_bytes) { 5899 wq->page_physical_address[p].low = ocs_addr32_lo(addr); 5900 wq->page_physical_address[p].high = ocs_addr32_hi(addr); 5901 } 5902 5903 return(sli_config_off + sizeof(sli4_req_fcoe_wq_create_v1_t)); 5904} 5905 5906/** 5907 * @ingroup sli_fc 5908 * @brief Write an FCOE_WQ_DESTROY command. 5909 * 5910 * @param sli4 SLI context. 5911 * @param buf Destination buffer for the command. 5912 * @param size Buffer size, in bytes. 5913 * @param wq_id WQ_ID. 5914 * 5915 * @return Returns the number of bytes written. 5916 */ 5917int32_t 5918sli_cmd_fcoe_wq_destroy(sli4_t *sli4, void *buf, size_t size, uint16_t wq_id) 5919{ 5920 sli4_req_fcoe_wq_destroy_t *wq = NULL; 5921 uint32_t sli_config_off = 0; 5922 5923 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 5924 uint32_t payload_size; 5925 5926 /* Payload length must accommodate both request and response */ 5927 payload_size = max(sizeof(sli4_req_fcoe_wq_destroy_t), 5928 sizeof(sli4_res_hdr_t)); 5929 5930 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 5931 NULL); 5932 } 5933 wq = (sli4_req_fcoe_wq_destroy_t *)((uint8_t *)buf + sli_config_off); 5934 5935 wq->hdr.opcode = SLI4_OPC_FCOE_WQ_DESTROY; 5936 wq->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 5937 wq->hdr.request_length = sizeof(sli4_req_fcoe_wq_destroy_t) - 5938 sizeof(sli4_req_hdr_t); 5939 5940 wq->wq_id = wq_id; 5941 5942 return(sli_config_off + sizeof(sli4_req_fcoe_wq_destroy_t)); 5943} 5944 5945/** 5946 * @ingroup sli_fc 5947 * @brief Write an FCOE_POST_SGL_PAGES command. 5948 * 5949 * @param sli4 SLI context. 5950 * @param buf Destination buffer for the command. 5951 * @param size Buffer size, in bytes. 5952 * @param xri starting XRI 5953 * @param xri_count XRI 5954 * @param page0 First SGL memory page. 5955 * @param page1 Second SGL memory page (optional). 5956 * @param dma DMA buffer for non-embedded mailbox command (options) 5957 * 5958 * if non-embedded mbx command is used, dma buffer must be at least (32 + xri_count*16) in length 5959 * 5960 * @return Returns the number of bytes written. 5961 */ 5962int32_t 5963sli_cmd_fcoe_post_sgl_pages(sli4_t *sli4, void *buf, size_t size, 5964 uint16_t xri, uint32_t xri_count, ocs_dma_t *page0[], ocs_dma_t *page1[], ocs_dma_t *dma) 5965{ 5966 sli4_req_fcoe_post_sgl_pages_t *post = NULL; 5967 uint32_t sli_config_off = 0; 5968 uint32_t i; 5969 5970 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 5971 uint32_t payload_size; 5972 5973 /* Payload length must accommodate both request and response */ 5974 payload_size = max(sizeof(sli4_req_fcoe_post_sgl_pages_t), 5975 sizeof(sli4_res_hdr_t)); 5976 5977 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 5978 dma); 5979 } 5980 if (dma) { 5981 post = dma->virt; 5982 ocs_memset(post, 0, dma->size); 5983 } else { 5984 post = (sli4_req_fcoe_post_sgl_pages_t *)((uint8_t *)buf + sli_config_off); 5985 } 5986 5987 post->hdr.opcode = SLI4_OPC_FCOE_POST_SGL_PAGES; 5988 post->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 5989 /* payload size calculation 5990 * 4 = xri_start + xri_count 5991 * xri_count = # of XRI's registered 5992 * sizeof(uint64_t) = physical address size 5993 * 2 = # of physical addresses per page set 5994 */ 5995 post->hdr.request_length = 4 + (xri_count * (sizeof(uint64_t) * 2)); 5996 5997 post->xri_start = xri; 5998 post->xri_count = xri_count; 5999 6000 for (i = 0; i < xri_count; i++) { 6001 post->page_set[i].page0_low = ocs_addr32_lo(page0[i]->phys); 6002 post->page_set[i].page0_high = ocs_addr32_hi(page0[i]->phys); 6003 } 6004 6005 if (page1) { 6006 for (i = 0; i < xri_count; i++) { 6007 post->page_set[i].page1_low = ocs_addr32_lo(page1[i]->phys); 6008 post->page_set[i].page1_high = ocs_addr32_hi(page1[i]->phys); 6009 } 6010 } 6011 6012 return dma ? sli_config_off : (sli_config_off + sizeof(sli4_req_fcoe_post_sgl_pages_t)); 6013} 6014 6015/** 6016 * @ingroup sli_fc 6017 * @brief Write an FCOE_RQ_CREATE command. 6018 * 6019 * @param sli4 SLI context. 6020 * @param buf Destination buffer for the command. 6021 * @param size Buffer size, in bytes. 6022 * @param qmem DMA memory for the queue. 6023 * @param cq_id Associated CQ_ID. 6024 * @param ulp This parameter carries the ULP for the RQ 6025 * @param buffer_size Buffer size pointed to by each RQE. 6026 * 6027 * @note This creates a Version 0 message. 6028 * 6029 * @return Returns the number of bytes written. 6030 */ 6031int32_t 6032sli_cmd_fcoe_rq_create(sli4_t *sli4, void *buf, size_t size, 6033 ocs_dma_t *qmem, uint16_t cq_id, uint16_t ulp, uint16_t buffer_size) 6034{ 6035 sli4_req_fcoe_rq_create_t *rq = NULL; 6036 uint32_t sli_config_off = 0; 6037 uint32_t p; 6038 uintptr_t addr; 6039 6040 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 6041 uint32_t payload_size; 6042 6043 /* Payload length must accommodate both request and response */ 6044 payload_size = max(sizeof(sli4_req_fcoe_rq_create_t), 6045 sizeof(sli4_res_common_create_queue_t)); 6046 6047 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 6048 NULL); 6049 } 6050 rq = (sli4_req_fcoe_rq_create_t *)((uint8_t *)buf + sli_config_off); 6051 6052 rq->hdr.opcode = SLI4_OPC_FCOE_RQ_CREATE; 6053 rq->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 6054 rq->hdr.request_length = sizeof(sli4_req_fcoe_rq_create_t) - 6055 sizeof(sli4_req_hdr_t); 6056 /* valid values for number of pages: 1-8 (sec 4.5.6) */ 6057 rq->num_pages = sli_page_count(qmem->size, SLI_PAGE_SIZE); 6058 if (!rq->num_pages || (rq->num_pages > SLI4_FCOE_RQ_CREATE_V0_MAX_PAGES)) { 6059 ocs_log_test(sli4->os, "num_pages %d not valid\n", rq->num_pages); 6060 return 0; 6061 } 6062 6063 /* 6064 * RQE count is the log base 2 of the total number of entries 6065 */ 6066 rq->rqe_count = ocs_lg2(qmem->size / SLI4_FCOE_RQE_SIZE); 6067 6068 if ((buffer_size < SLI4_FCOE_RQ_CREATE_V0_MIN_BUF_SIZE) || 6069 (buffer_size > SLI4_FCOE_RQ_CREATE_V0_MAX_BUF_SIZE)) { 6070 ocs_log_err(sli4->os, "buffer_size %d out of range (%d-%d)\n", 6071 buffer_size, 6072 SLI4_FCOE_RQ_CREATE_V0_MIN_BUF_SIZE, 6073 SLI4_FCOE_RQ_CREATE_V0_MAX_BUF_SIZE); 6074 return -1; 6075 } 6076 rq->buffer_size = buffer_size; 6077 6078 rq->cq_id = cq_id; 6079 6080 if (sli4->config.dual_ulp_capable) { 6081 rq->dua = 1; 6082 rq->bqu = 1; 6083 rq->ulp = ulp; 6084 } 6085 6086 for (p = 0, addr = qmem->phys; 6087 p < rq->num_pages; 6088 p++, addr += SLI_PAGE_SIZE) { 6089 rq->page_physical_address[p].low = ocs_addr32_lo(addr); 6090 rq->page_physical_address[p].high = ocs_addr32_hi(addr); 6091 } 6092 6093 return(sli_config_off + sizeof(sli4_req_fcoe_rq_create_t)); 6094} 6095 6096/** 6097 * @ingroup sli_fc 6098 * @brief Write an FCOE_RQ_CREATE_V1 command. 6099 * 6100 * @param sli4 SLI context. 6101 * @param buf Destination buffer for the command. 6102 * @param size Buffer size, in bytes. 6103 * @param qmem DMA memory for the queue. 6104 * @param cq_id Associated CQ_ID. 6105 * @param ulp This parameter carries the ULP for RQ (ignored for V1) 6106 * @param buffer_size Buffer size pointed to by each RQE. 6107 * 6108 * @note This creates a Version 0 message 6109 * 6110 * @return Returns the number of bytes written. 6111 */ 6112int32_t 6113sli_cmd_fcoe_rq_create_v1(sli4_t *sli4, void *buf, size_t size, 6114 ocs_dma_t *qmem, uint16_t cq_id, uint16_t ulp, 6115 uint16_t buffer_size) 6116{ 6117 sli4_req_fcoe_rq_create_v1_t *rq = NULL; 6118 uint32_t sli_config_off = 0; 6119 uint32_t p; 6120 uintptr_t addr; 6121 6122 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 6123 uint32_t payload_size; 6124 6125 /* Payload length must accommodate both request and response */ 6126 payload_size = max(sizeof(sli4_req_fcoe_rq_create_v1_t), 6127 sizeof(sli4_res_common_create_queue_t)); 6128 6129 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 6130 NULL); 6131 } 6132 rq = (sli4_req_fcoe_rq_create_v1_t *)((uint8_t *)buf + sli_config_off); 6133 6134 rq->hdr.opcode = SLI4_OPC_FCOE_RQ_CREATE; 6135 rq->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 6136 rq->hdr.request_length = sizeof(sli4_req_fcoe_rq_create_v1_t) - 6137 sizeof(sli4_req_hdr_t); 6138 rq->hdr.version = 1; 6139 6140 /* Disable "no buffer warnings" to avoid Lancer bug */ 6141 rq->dnb = TRUE; 6142 6143 /* valid values for number of pages: 1-8 (sec 4.5.6) */ 6144 rq->num_pages = sli_page_count(qmem->size, SLI_PAGE_SIZE); 6145 if (!rq->num_pages || (rq->num_pages > SLI4_FCOE_RQ_CREATE_V1_MAX_PAGES)) { 6146 ocs_log_test(sli4->os, "num_pages %d not valid, max %d\n", 6147 rq->num_pages, SLI4_FCOE_RQ_CREATE_V1_MAX_PAGES); 6148 return 0; 6149 } 6150 6151 /* 6152 * RQE count is the total number of entries (note not lg2(# entries)) 6153 */ 6154 rq->rqe_count = qmem->size / SLI4_FCOE_RQE_SIZE; 6155 6156 rq->rqe_size = SLI4_FCOE_RQE_SIZE_8; 6157 6158 rq->page_size = SLI4_FCOE_RQ_PAGE_SIZE_4096; 6159 6160 if ((buffer_size < sli4->config.rq_min_buf_size) || 6161 (buffer_size > sli4->config.rq_max_buf_size)) { 6162 ocs_log_err(sli4->os, "buffer_size %d out of range (%d-%d)\n", 6163 buffer_size, 6164 sli4->config.rq_min_buf_size, 6165 sli4->config.rq_max_buf_size); 6166 return -1; 6167 } 6168 rq->buffer_size = buffer_size; 6169 6170 rq->cq_id = cq_id; 6171 6172 for (p = 0, addr = qmem->phys; 6173 p < rq->num_pages; 6174 p++, addr += SLI_PAGE_SIZE) { 6175 rq->page_physical_address[p].low = ocs_addr32_lo(addr); 6176 rq->page_physical_address[p].high = ocs_addr32_hi(addr); 6177 } 6178 6179 return(sli_config_off + sizeof(sli4_req_fcoe_rq_create_v1_t)); 6180} 6181 6182/** 6183 * @ingroup sli_fc 6184 * @brief Write an FCOE_RQ_DESTROY command. 6185 * 6186 * @param sli4 SLI context. 6187 * @param buf Destination buffer for the command. 6188 * @param size Buffer size, in bytes. 6189 * @param rq_id RQ_ID. 6190 * 6191 * @return Returns the number of bytes written. 6192 */ 6193int32_t 6194sli_cmd_fcoe_rq_destroy(sli4_t *sli4, void *buf, size_t size, uint16_t rq_id) 6195{ 6196 sli4_req_fcoe_rq_destroy_t *rq = NULL; 6197 uint32_t sli_config_off = 0; 6198 6199 if (SLI4_PORT_TYPE_FC == sli4->port_type) { 6200 uint32_t payload_size; 6201 6202 /* Payload length must accommodate both request and response */ 6203 payload_size = max(sizeof(sli4_req_fcoe_rq_destroy_t), 6204 sizeof(sli4_res_hdr_t)); 6205 6206 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, 6207 NULL); 6208 } 6209 rq = (sli4_req_fcoe_rq_destroy_t *)((uint8_t *)buf + sli_config_off); 6210 6211 rq->hdr.opcode = SLI4_OPC_FCOE_RQ_DESTROY; 6212 rq->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 6213 rq->hdr.request_length = sizeof(sli4_req_fcoe_rq_destroy_t) - 6214 sizeof(sli4_req_hdr_t); 6215 6216 rq->rq_id = rq_id; 6217 6218 return(sli_config_off + sizeof(sli4_req_fcoe_rq_destroy_t)); 6219} 6220 6221/** 6222 * @ingroup sli_fc 6223 * @brief Write an FCOE_READ_FCF_TABLE command. 6224 * 6225 * @note 6226 * The response of this command exceeds the size of an embedded 6227 * command and requires an external buffer with DMA capability to hold the results. 6228 * The caller should allocate the ocs_dma_t structure / memory. 6229 * 6230 * @param sli4 SLI context. 6231 * @param buf Destination buffer for the command. 6232 * @param size Buffer size, in bytes. 6233 * @param dma Pointer to DMA memory structure. This is allocated by the caller. 6234 * @param index FCF table index to retrieve. 6235 * 6236 * @return Returns the number of bytes written. 6237 */ 6238int32_t 6239sli_cmd_fcoe_read_fcf_table(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *dma, uint16_t index) 6240{ 6241 sli4_req_fcoe_read_fcf_table_t *read_fcf = NULL; 6242 6243 if (SLI4_PORT_TYPE_FC != sli4->port_type) { 6244 ocs_log_test(sli4->os, "FCOE_READ_FCF_TABLE only supported on FC\n"); 6245 return -1; 6246 } 6247 6248 read_fcf = dma->virt; 6249 6250 ocs_memset(read_fcf, 0, sizeof(sli4_req_fcoe_read_fcf_table_t)); 6251 6252 read_fcf->hdr.opcode = SLI4_OPC_FCOE_READ_FCF_TABLE; 6253 read_fcf->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 6254 read_fcf->hdr.request_length = dma->size - 6255 sizeof(sli4_req_fcoe_read_fcf_table_t); 6256 read_fcf->fcf_index = index; 6257 6258 return sli_cmd_sli_config(sli4, buf, size, 0, dma); 6259} 6260 6261/** 6262 * @ingroup sli_fc 6263 * @brief Write an FCOE_POST_HDR_TEMPLATES command. 6264 * 6265 * @param sli4 SLI context. 6266 * @param buf Destination buffer for the command. 6267 * @param size Buffer size, in bytes. 6268 * @param dma Pointer to DMA memory structure. This is allocated by the caller. 6269 * @param rpi Starting RPI index for the header templates. 6270 * @param payload_dma Pointer to DMA memory used to hold larger descriptor counts. 6271 * 6272 * @return Returns the number of bytes written. 6273 */ 6274int32_t 6275sli_cmd_fcoe_post_hdr_templates(sli4_t *sli4, void *buf, size_t size, 6276 ocs_dma_t *dma, uint16_t rpi, ocs_dma_t *payload_dma) 6277{ 6278 sli4_req_fcoe_post_hdr_templates_t *template = NULL; 6279 uint32_t sli_config_off = 0; 6280 uintptr_t phys = 0; 6281 uint32_t i = 0; 6282 uint32_t page_count; 6283 uint32_t payload_size; 6284 6285 page_count = sli_page_count(dma->size, SLI_PAGE_SIZE); 6286 6287 payload_size = sizeof(sli4_req_fcoe_post_hdr_templates_t) + 6288 page_count * sizeof(sli4_physical_page_descriptor_t); 6289 6290 if (page_count > 16) { 6291 /* We can't fit more than 16 descriptors into an embedded mailbox 6292 command, it has to be non-embedded */ 6293 if (ocs_dma_alloc(sli4->os, payload_dma, payload_size, 4)) { 6294 ocs_log_err(sli4->os, "mailbox payload memory allocation fail\n"); 6295 return 0; 6296 } 6297 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, payload_dma); 6298 template = (sli4_req_fcoe_post_hdr_templates_t *)payload_dma->virt; 6299 } else { 6300 sli_config_off = sli_cmd_sli_config(sli4, buf, size, payload_size, NULL); 6301 template = (sli4_req_fcoe_post_hdr_templates_t *)((uint8_t *)buf + sli_config_off); 6302 } 6303 6304 if (UINT16_MAX == rpi) { 6305 rpi = sli4->config.extent[SLI_RSRC_FCOE_RPI].base[0]; 6306 } 6307 6308 template->hdr.opcode = SLI4_OPC_FCOE_POST_HDR_TEMPLATES; 6309 template->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 6310 template->hdr.request_length = sizeof(sli4_req_fcoe_post_hdr_templates_t) - 6311 sizeof(sli4_req_hdr_t); 6312 6313 template->rpi_offset = rpi; 6314 template->page_count = page_count; 6315 phys = dma->phys; 6316 for (i = 0; i < template->page_count; i++) { 6317 template->page_descriptor[i].low = ocs_addr32_lo(phys); 6318 template->page_descriptor[i].high = ocs_addr32_hi(phys); 6319 6320 phys += SLI_PAGE_SIZE; 6321 } 6322 6323 return(sli_config_off + payload_size); 6324} 6325 6326int32_t 6327sli_cmd_fcoe_rediscover_fcf(sli4_t *sli4, void *buf, size_t size, uint16_t index) 6328{ 6329 sli4_req_fcoe_rediscover_fcf_t *redisc = NULL; 6330 uint32_t sli_config_off = 0; 6331 6332 sli_config_off = sli_cmd_sli_config(sli4, buf, size, 6333 sizeof(sli4_req_fcoe_rediscover_fcf_t), 6334 NULL); 6335 6336 redisc = (sli4_req_fcoe_rediscover_fcf_t *)((uint8_t *)buf + sli_config_off); 6337 6338 redisc->hdr.opcode = SLI4_OPC_FCOE_REDISCOVER_FCF; 6339 redisc->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 6340 redisc->hdr.request_length = sizeof(sli4_req_fcoe_rediscover_fcf_t) - 6341 sizeof(sli4_req_hdr_t); 6342 6343 if (index == UINT16_MAX) { 6344 redisc->fcf_count = 0; 6345 } else { 6346 redisc->fcf_count = 1; 6347 redisc->fcf_index[0] = index; 6348 } 6349 6350 return(sli_config_off + sizeof(sli4_req_fcoe_rediscover_fcf_t)); 6351} 6352 6353/** 6354 * @ingroup sli_fc 6355 * @brief Write an ABORT_WQE work queue entry. 6356 * 6357 * @param sli4 SLI context. 6358 * @param buf Destination buffer for the WQE. 6359 * @param size Buffer size, in bytes. 6360 * @param type Abort type, such as XRI, abort tag, and request tag. 6361 * @param send_abts Boolean to cause the hardware to automatically generate an ABTS. 6362 * @param ids ID of IOs to abort. 6363 * @param mask Mask applied to the ID values to abort. 6364 * @param tag Tag value associated with this abort. 6365 * @param cq_id The id of the completion queue where the WQE response is sent. 6366 * @param dnrx When set to 1, this field indicates that the SLI Port must not return the associated XRI to the SLI 6367 * Port's optimized write XRI pool. 6368 * 6369 * @return Returns 0 on success, or a non-zero value on failure. 6370 */ 6371int32_t 6372sli_abort_wqe(sli4_t *sli4, void *buf, size_t size, sli4_abort_type_e type, uint32_t send_abts, 6373 uint32_t ids, uint32_t mask, uint16_t tag, uint16_t cq_id) 6374{ 6375 sli4_abort_wqe_t *abort = buf; 6376 6377 ocs_memset(buf, 0, size); 6378 6379 switch (type) { 6380 case SLI_ABORT_XRI: 6381 abort->criteria = SLI4_ABORT_CRITERIA_XRI_TAG; 6382 if (mask) { 6383 ocs_log_warn(sli4->os, "warning non-zero mask %#x when aborting XRI %#x\n", mask, ids); 6384 mask = 0; 6385 } 6386 break; 6387 case SLI_ABORT_ABORT_ID: 6388 abort->criteria = SLI4_ABORT_CRITERIA_ABORT_TAG; 6389 break; 6390 case SLI_ABORT_REQUEST_ID: 6391 abort->criteria = SLI4_ABORT_CRITERIA_REQUEST_TAG; 6392 break; 6393 default: 6394 ocs_log_test(sli4->os, "unsupported type %#x\n", type); 6395 return -1; 6396 } 6397 6398 abort->ia = send_abts ? 0 : 1; 6399 6400 /* Suppress ABTS retries */ 6401 abort->ir = 1; 6402 6403 abort->t_mask = mask; 6404 abort->t_tag = ids; 6405 abort->command = SLI4_WQE_ABORT; 6406 abort->request_tag = tag; 6407 abort->qosd = TRUE; 6408 abort->cq_id = cq_id; 6409 abort->cmd_type = SLI4_CMD_ABORT_WQE; 6410 6411 return 0; 6412} 6413 6414/** 6415 * @ingroup sli_fc 6416 * @brief Write an ELS_REQUEST64_WQE work queue entry. 6417 * 6418 * @param sli4 SLI context. 6419 * @param buf Destination buffer for the WQE. 6420 * @param size Buffer size, in bytes. 6421 * @param sgl DMA memory for the ELS request. 6422 * @param req_type ELS request type. 6423 * @param req_len Length of ELS request in bytes. 6424 * @param max_rsp_len Max length of ELS response in bytes. 6425 * @param timeout Time, in seconds, before an IO times out. Zero means 2 * R_A_TOV. 6426 * @param xri XRI for this exchange. 6427 * @param tag IO tag value. 6428 * @param cq_id The id of the completion queue where the WQE response is sent. 6429 * @param rnode Destination of ELS request (that is, the remote node). 6430 * 6431 * @return Returns 0 on success, or a non-zero value on failure. 6432 */ 6433int32_t 6434sli_els_request64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, uint8_t req_type, 6435 uint32_t req_len, uint32_t max_rsp_len, uint8_t timeout, 6436 uint16_t xri, uint16_t tag, uint16_t cq_id, ocs_remote_node_t *rnode) 6437{ 6438 sli4_els_request64_wqe_t *els = buf; 6439 sli4_sge_t *sge = sgl->virt; 6440 uint8_t is_fabric = FALSE; 6441 6442 ocs_memset(buf, 0, size); 6443 6444 if (sli4->config.sgl_pre_registered) { 6445 els->xbl = FALSE; 6446 6447 els->dbde = TRUE; 6448 els->els_request_payload.bde_type = SLI4_BDE_TYPE_BDE_64; 6449 6450 els->els_request_payload.buffer_length = req_len; 6451 els->els_request_payload.u.data.buffer_address_low = sge[0].buffer_address_low; 6452 els->els_request_payload.u.data.buffer_address_high = sge[0].buffer_address_high; 6453 } else { 6454 els->xbl = TRUE; 6455 6456 els->els_request_payload.bde_type = SLI4_BDE_TYPE_BLP; 6457 6458 els->els_request_payload.buffer_length = 2 * sizeof(sli4_sge_t); 6459 els->els_request_payload.u.blp.sgl_segment_address_low = ocs_addr32_lo(sgl->phys); 6460 els->els_request_payload.u.blp.sgl_segment_address_high = ocs_addr32_hi(sgl->phys); 6461 } 6462 6463 els->els_request_payload_length = req_len; 6464 els->max_response_payload_length = max_rsp_len; 6465 6466 els->xri_tag = xri; 6467 els->timer = timeout; 6468 els->class = SLI4_ELS_REQUEST64_CLASS_3; 6469 6470 els->command = SLI4_WQE_ELS_REQUEST64; 6471 6472 els->request_tag = tag; 6473 6474 if (rnode->node_group) { 6475 els->hlm = TRUE; 6476 els->remote_id = rnode->fc_id & 0x00ffffff; 6477 } 6478 6479 els->iod = SLI4_ELS_REQUEST64_DIR_READ; 6480 6481 els->qosd = TRUE; 6482 6483 /* figure out the ELS_ID value from the request buffer */ 6484 6485 switch (req_type) { 6486 case FC_ELS_CMD_LOGO: 6487 els->els_id = SLI4_ELS_REQUEST64_LOGO; 6488 if (rnode->attached) { 6489 els->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 6490 els->context_tag = rnode->indicator; 6491 } else { 6492 els->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 6493 els->context_tag = rnode->sport->indicator; 6494 } 6495 if (FC_ADDR_FABRIC == rnode->fc_id) { 6496 is_fabric = TRUE; 6497 } 6498 break; 6499 case FC_ELS_CMD_FDISC: 6500 if (FC_ADDR_FABRIC == rnode->fc_id) { 6501 is_fabric = TRUE; 6502 } 6503 if (0 == rnode->sport->fc_id) { 6504 els->els_id = SLI4_ELS_REQUEST64_FDISC; 6505 is_fabric = TRUE; 6506 } else { 6507 els->els_id = SLI4_ELS_REQUEST64_OTHER; 6508 } 6509 els->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 6510 els->context_tag = rnode->sport->indicator; 6511 els->sp = TRUE; 6512 break; 6513 case FC_ELS_CMD_FLOGI: 6514 els->els_id = SLI4_ELS_REQUEST64_FLOGIN; 6515 is_fabric = TRUE; 6516 if (SLI4_IF_TYPE_BE3_SKH_PF == sli4->if_type) { 6517 if (!rnode->sport->domain) { 6518 ocs_log_test(sli4->os, "invalid domain handle\n"); 6519 return -1; 6520 } 6521 /* 6522 * IF_TYPE 0 skips INIT_VFI/INIT_VPI and therefore must use the 6523 * FCFI here 6524 */ 6525 els->ct = SLI4_ELS_REQUEST64_CONTEXT_FCFI; 6526 els->context_tag = rnode->sport->domain->fcf_indicator; 6527 els->sp = TRUE; 6528 } else { 6529 els->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 6530 els->context_tag = rnode->sport->indicator; 6531 6532 /* 6533 * Set SP here ... we haven't done a REG_VPI yet 6534 * TODO: need to maybe not set this when we have 6535 * completed VFI/VPI registrations ... 6536 * 6537 * Use the FC_ID of the SPORT if it has been allocated, otherwise 6538 * use an S_ID of zero. 6539 */ 6540 els->sp = TRUE; 6541 if (rnode->sport->fc_id != UINT32_MAX) { 6542 els->sid = rnode->sport->fc_id; 6543 } 6544 } 6545 break; 6546 case FC_ELS_CMD_PLOGI: 6547 els->els_id = SLI4_ELS_REQUEST64_PLOGI; 6548 els->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 6549 els->context_tag = rnode->sport->indicator; 6550 break; 6551 case FC_ELS_CMD_SCR: 6552 els->els_id = SLI4_ELS_REQUEST64_OTHER; 6553 els->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 6554 els->context_tag = rnode->sport->indicator; 6555 break; 6556 default: 6557 els->els_id = SLI4_ELS_REQUEST64_OTHER; 6558 if (rnode->attached) { 6559 els->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 6560 els->context_tag = rnode->indicator; 6561 } else { 6562 els->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 6563 els->context_tag = rnode->sport->indicator; 6564 } 6565 break; 6566 } 6567 6568 if (is_fabric) { 6569 els->cmd_type = SLI4_ELS_REQUEST64_CMD_FABRIC; 6570 } else { 6571 els->cmd_type = SLI4_ELS_REQUEST64_CMD_NON_FABRIC; 6572 } 6573 6574 els->cq_id = cq_id; 6575 6576 if (SLI4_ELS_REQUEST64_CONTEXT_RPI != els->ct) { 6577 els->remote_id = rnode->fc_id; 6578 } 6579 if (SLI4_ELS_REQUEST64_CONTEXT_VPI == els->ct) { 6580 els->temporary_rpi = rnode->indicator; 6581 } 6582 6583 return 0; 6584} 6585 6586/** 6587 * @ingroup sli_fc 6588 * @brief Write an FCP_ICMND64_WQE work queue entry. 6589 * 6590 * @param sli4 SLI context. 6591 * @param buf Destination buffer for the WQE. 6592 * @param size Buffer size, in bytes. 6593 * @param sgl DMA memory for the scatter gather list. 6594 * @param xri XRI for this exchange. 6595 * @param tag IO tag value. 6596 * @param cq_id The id of the completion queue where the WQE response is sent. 6597 * @param rpi remote node indicator (RPI) 6598 * @param rnode Destination request (that is, the remote node). 6599 * @param timeout Time, in seconds, before an IO times out. Zero means no timeout. 6600 * 6601 * @return Returns 0 on success, or a non-zero value on failure. 6602 */ 6603int32_t 6604sli_fcp_icmnd64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, 6605 uint16_t xri, uint16_t tag, uint16_t cq_id, 6606 uint32_t rpi, ocs_remote_node_t *rnode, uint8_t timeout) 6607{ 6608 sli4_fcp_icmnd64_wqe_t *icmnd = buf; 6609 sli4_sge_t *sge = NULL; 6610 6611 ocs_memset(buf, 0, size); 6612 6613 if (!sgl || !sgl->virt) { 6614 ocs_log_err(sli4->os, "bad parameter sgl=%p virt=%p\n", 6615 sgl, sgl ? sgl->virt : NULL); 6616 return -1; 6617 } 6618 sge = sgl->virt; 6619 6620 if (sli4->config.sgl_pre_registered) { 6621 icmnd->xbl = FALSE; 6622 6623 icmnd->dbde = TRUE; 6624 icmnd->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6625 6626 icmnd->bde.buffer_length = sge[0].buffer_length; 6627 icmnd->bde.u.data.buffer_address_low = sge[0].buffer_address_low; 6628 icmnd->bde.u.data.buffer_address_high = sge[0].buffer_address_high; 6629 } else { 6630 icmnd->xbl = TRUE; 6631 6632 icmnd->bde.bde_type = SLI4_BDE_TYPE_BLP; 6633 6634 icmnd->bde.buffer_length = sgl->size; 6635 icmnd->bde.u.blp.sgl_segment_address_low = ocs_addr32_lo(sgl->phys); 6636 icmnd->bde.u.blp.sgl_segment_address_high = ocs_addr32_hi(sgl->phys); 6637 } 6638 6639 icmnd->payload_offset_length = sge[0].buffer_length + sge[1].buffer_length; 6640 icmnd->xri_tag = xri; 6641 icmnd->context_tag = rpi; 6642 icmnd->timer = timeout; 6643 6644 icmnd->pu = 2; /* WQE word 4 contains read transfer length */ 6645 icmnd->class = SLI4_ELS_REQUEST64_CLASS_3; 6646 icmnd->command = SLI4_WQE_FCP_ICMND64; 6647 icmnd->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 6648 6649 icmnd->abort_tag = xri; 6650 6651 icmnd->request_tag = tag; 6652 icmnd->len_loc = 3; 6653 if (rnode->node_group) { 6654 icmnd->hlm = TRUE; 6655 icmnd->remote_n_port_id = rnode->fc_id & 0x00ffffff; 6656 } 6657 if (((ocs_node_t *)rnode->node)->fcp2device) { 6658 icmnd->erp = TRUE; 6659 } 6660 icmnd->cmd_type = SLI4_CMD_FCP_ICMND64_WQE; 6661 icmnd->cq_id = cq_id; 6662 6663 return 0; 6664} 6665 6666/** 6667 * @ingroup sli_fc 6668 * @brief Write an FCP_IREAD64_WQE work queue entry. 6669 * 6670 * @param sli4 SLI context. 6671 * @param buf Destination buffer for the WQE. 6672 * @param size Buffer size, in bytes. 6673 * @param sgl DMA memory for the scatter gather list. 6674 * @param first_data_sge Index of first data sge (used if perf hints are enabled) 6675 * @param xfer_len Data transfer length. 6676 * @param xri XRI for this exchange. 6677 * @param tag IO tag value. 6678 * @param cq_id The id of the completion queue where the WQE response is sent. 6679 * @param rpi remote node indicator (RPI) 6680 * @param rnode Destination request (i.e. remote node). 6681 * @param dif T10 DIF operation, or 0 to disable. 6682 * @param bs T10 DIF block size, or 0 if DIF is disabled. 6683 * @param timeout Time, in seconds, before an IO times out. Zero means no timeout. 6684 * 6685 * @return Returns 0 on success, or a non-zero value on failure. 6686 */ 6687int32_t 6688sli_fcp_iread64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, uint32_t first_data_sge, 6689 uint32_t xfer_len, uint16_t xri, uint16_t tag, uint16_t cq_id, 6690 uint32_t rpi, ocs_remote_node_t *rnode, 6691 uint8_t dif, uint8_t bs, uint8_t timeout) 6692{ 6693 sli4_fcp_iread64_wqe_t *iread = buf; 6694 sli4_sge_t *sge = NULL; 6695 6696 ocs_memset(buf, 0, size); 6697 6698 if (!sgl || !sgl->virt) { 6699 ocs_log_err(sli4->os, "bad parameter sgl=%p virt=%p\n", 6700 sgl, sgl ? sgl->virt : NULL); 6701 return -1; 6702 } 6703 sge = sgl->virt; 6704 6705 if (sli4->config.sgl_pre_registered) { 6706 iread->xbl = FALSE; 6707 6708 iread->dbde = TRUE; 6709 iread->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6710 6711 iread->bde.buffer_length = sge[0].buffer_length; 6712 iread->bde.u.data.buffer_address_low = sge[0].buffer_address_low; 6713 iread->bde.u.data.buffer_address_high = sge[0].buffer_address_high; 6714 } else { 6715 iread->xbl = TRUE; 6716 6717 iread->bde.bde_type = SLI4_BDE_TYPE_BLP; 6718 6719 iread->bde.buffer_length = sgl->size; 6720 iread->bde.u.blp.sgl_segment_address_low = ocs_addr32_lo(sgl->phys); 6721 iread->bde.u.blp.sgl_segment_address_high = ocs_addr32_hi(sgl->phys); 6722 6723 /* fill out fcp_cmnd buffer len and change resp buffer to be of type 6724 * "skip" (note: response will still be written to sge[1] if necessary) */ 6725 iread->fcp_cmd_buffer_length = sge[0].buffer_length; 6726 sge[1].sge_type = SLI4_SGE_TYPE_SKIP; 6727 } 6728 6729 iread->payload_offset_length = sge[0].buffer_length + sge[1].buffer_length; 6730 iread->total_transfer_length = xfer_len; 6731 6732 iread->xri_tag = xri; 6733 iread->context_tag = rpi; 6734 6735 iread->timer = timeout; 6736 6737 iread->pu = 2; /* WQE word 4 contains read transfer length */ 6738 iread->class = SLI4_ELS_REQUEST64_CLASS_3; 6739 iread->command = SLI4_WQE_FCP_IREAD64; 6740 iread->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 6741 iread->dif = dif; 6742 iread->bs = bs; 6743 6744 iread->abort_tag = xri; 6745 6746 iread->request_tag = tag; 6747 iread->len_loc = 3; 6748 if (rnode->node_group) { 6749 iread->hlm = TRUE; 6750 iread->remote_n_port_id = rnode->fc_id & 0x00ffffff; 6751 } 6752 if (((ocs_node_t *)rnode->node)->fcp2device) { 6753 iread->erp = TRUE; 6754 } 6755 iread->iod = 1; 6756 iread->cmd_type = SLI4_CMD_FCP_IREAD64_WQE; 6757 iread->cq_id = cq_id; 6758 6759 if (sli4->config.perf_hint) { 6760 iread->first_data_bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6761 iread->first_data_bde.buffer_length = sge[first_data_sge].buffer_length; 6762 iread->first_data_bde.u.data.buffer_address_low = sge[first_data_sge].buffer_address_low; 6763 iread->first_data_bde.u.data.buffer_address_high = sge[first_data_sge].buffer_address_high; 6764 } 6765 6766 return 0; 6767} 6768 6769/** 6770 * @ingroup sli_fc 6771 * @brief Write an FCP_IWRITE64_WQE work queue entry. 6772 * 6773 * @param sli4 SLI context. 6774 * @param buf Destination buffer for the WQE. 6775 * @param size Buffer size, in bytes. 6776 * @param sgl DMA memory for the scatter gather list. 6777 * @param first_data_sge Index of first data sge (used if perf hints are enabled) 6778 * @param xfer_len Data transfer length. 6779 * @param first_burst The number of first burst bytes 6780 * @param xri XRI for this exchange. 6781 * @param tag IO tag value. 6782 * @param cq_id The id of the completion queue where the WQE response is sent. 6783 * @param rpi remote node indicator (RPI) 6784 * @param rnode Destination request (i.e. remote node) 6785 * @param dif T10 DIF operation, or 0 to disable 6786 * @param bs T10 DIF block size, or 0 if DIF is disabled 6787 * @param timeout Time, in seconds, before an IO times out. Zero means no timeout. 6788 * 6789 * @return Returns 0 on success, or a non-zero value on failure. 6790 */ 6791int32_t 6792sli_fcp_iwrite64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, uint32_t first_data_sge, 6793 uint32_t xfer_len, uint32_t first_burst, uint16_t xri, uint16_t tag, uint16_t cq_id, 6794 uint32_t rpi, ocs_remote_node_t *rnode, 6795 uint8_t dif, uint8_t bs, uint8_t timeout) 6796{ 6797 sli4_fcp_iwrite64_wqe_t *iwrite = buf; 6798 sli4_sge_t *sge = NULL; 6799 6800 ocs_memset(buf, 0, size); 6801 6802 if (!sgl || !sgl->virt) { 6803 ocs_log_err(sli4->os, "bad parameter sgl=%p virt=%p\n", 6804 sgl, sgl ? sgl->virt : NULL); 6805 return -1; 6806 } 6807 sge = sgl->virt; 6808 6809 if (sli4->config.sgl_pre_registered) { 6810 iwrite->xbl = FALSE; 6811 6812 iwrite->dbde = TRUE; 6813 iwrite->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6814 6815 iwrite->bde.buffer_length = sge[0].buffer_length; 6816 iwrite->bde.u.data.buffer_address_low = sge[0].buffer_address_low; 6817 iwrite->bde.u.data.buffer_address_high = sge[0].buffer_address_high; 6818 } else { 6819 iwrite->xbl = TRUE; 6820 6821 iwrite->bde.bde_type = SLI4_BDE_TYPE_BLP; 6822 6823 iwrite->bde.buffer_length = sgl->size; 6824 iwrite->bde.u.blp.sgl_segment_address_low = ocs_addr32_lo(sgl->phys); 6825 iwrite->bde.u.blp.sgl_segment_address_high = ocs_addr32_hi(sgl->phys); 6826 6827 /* fill out fcp_cmnd buffer len and change resp buffer to be of type 6828 * "skip" (note: response will still be written to sge[1] if necessary) */ 6829 iwrite->fcp_cmd_buffer_length = sge[0].buffer_length; 6830 sge[1].sge_type = SLI4_SGE_TYPE_SKIP; 6831 } 6832 6833 iwrite->payload_offset_length = sge[0].buffer_length + sge[1].buffer_length; 6834 iwrite->total_transfer_length = xfer_len; 6835 iwrite->initial_transfer_length = MIN(xfer_len, first_burst); 6836 6837 iwrite->xri_tag = xri; 6838 iwrite->context_tag = rpi; 6839 6840 iwrite->timer = timeout; 6841 6842 iwrite->pu = 2; /* WQE word 4 contains read transfer length */ 6843 iwrite->class = SLI4_ELS_REQUEST64_CLASS_3; 6844 iwrite->command = SLI4_WQE_FCP_IWRITE64; 6845 iwrite->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 6846 iwrite->dif = dif; 6847 iwrite->bs = bs; 6848 6849 iwrite->abort_tag = xri; 6850 6851 iwrite->request_tag = tag; 6852 iwrite->len_loc = 3; 6853 if (rnode->node_group) { 6854 iwrite->hlm = TRUE; 6855 iwrite->remote_n_port_id = rnode->fc_id & 0x00ffffff; 6856 } 6857 if (((ocs_node_t *)rnode->node)->fcp2device) { 6858 iwrite->erp = TRUE; 6859 } 6860 iwrite->cmd_type = SLI4_CMD_FCP_IWRITE64_WQE; 6861 iwrite->cq_id = cq_id; 6862 6863 if (sli4->config.perf_hint) { 6864 iwrite->first_data_bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6865 iwrite->first_data_bde.buffer_length = sge[first_data_sge].buffer_length; 6866 iwrite->first_data_bde.u.data.buffer_address_low = sge[first_data_sge].buffer_address_low; 6867 iwrite->first_data_bde.u.data.buffer_address_high = sge[first_data_sge].buffer_address_high; 6868 } 6869 6870 return 0; 6871} 6872 6873/** 6874 * @ingroup sli_fc 6875 * @brief Write an FCP_TRECEIVE64_WQE work queue entry. 6876 * 6877 * @param sli4 SLI context. 6878 * @param buf Destination buffer for the WQE. 6879 * @param size Buffer size, in bytes. 6880 * @param sgl DMA memory for the Scatter-Gather List. 6881 * @param first_data_sge Index of first data sge (used if perf hints are enabled) 6882 * @param relative_off Relative offset of the IO (if any). 6883 * @param xfer_len Data transfer length. 6884 * @param xri XRI for this exchange. 6885 * @param tag IO tag value. 6886 * @param xid OX_ID for the exchange. 6887 * @param cq_id The id of the completion queue where the WQE response is sent. 6888 * @param rpi remote node indicator (RPI) 6889 * @param rnode Destination request (i.e. remote node). 6890 * @param flags Optional attributes, including: 6891 * - ACTIVE - IO is already active. 6892 * - AUTO RSP - Automatically generate a good FCP_RSP. 6893 * @param dif T10 DIF operation, or 0 to disable. 6894 * @param bs T10 DIF block size, or 0 if DIF is disabled. 6895 * @param csctl value of csctl field. 6896 * @param app_id value for VM application header. 6897 * 6898 * @return Returns 0 on success, or a non-zero value on failure. 6899 */ 6900int32_t 6901sli_fcp_treceive64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, uint32_t first_data_sge, 6902 uint32_t relative_off, uint32_t xfer_len, uint16_t xri, uint16_t tag, uint16_t cq_id, 6903 uint16_t xid, uint32_t rpi, ocs_remote_node_t *rnode, uint32_t flags, uint8_t dif, uint8_t bs, 6904 uint8_t csctl, uint32_t app_id) 6905{ 6906 sli4_fcp_treceive64_wqe_t *trecv = buf; 6907 sli4_fcp_128byte_wqe_t *trecv_128 = buf; 6908 sli4_sge_t *sge = NULL; 6909 6910 ocs_memset(buf, 0, size); 6911 6912 if (!sgl || !sgl->virt) { 6913 ocs_log_err(sli4->os, "bad parameter sgl=%p virt=%p\n", 6914 sgl, sgl ? sgl->virt : NULL); 6915 return -1; 6916 } 6917 sge = sgl->virt; 6918 6919 if (sli4->config.sgl_pre_registered) { 6920 trecv->xbl = FALSE; 6921 6922 trecv->dbde = TRUE; 6923 trecv->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6924 6925 trecv->bde.buffer_length = sge[0].buffer_length; 6926 trecv->bde.u.data.buffer_address_low = sge[0].buffer_address_low; 6927 trecv->bde.u.data.buffer_address_high = sge[0].buffer_address_high; 6928 6929 trecv->payload_offset_length = sge[0].buffer_length; 6930 } else { 6931 trecv->xbl = TRUE; 6932 6933 /* if data is a single physical address, use a BDE */ 6934 if (!dif && (xfer_len <= sge[2].buffer_length)) { 6935 trecv->dbde = TRUE; 6936 trecv->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6937 6938 trecv->bde.buffer_length = sge[2].buffer_length; 6939 trecv->bde.u.data.buffer_address_low = sge[2].buffer_address_low; 6940 trecv->bde.u.data.buffer_address_high = sge[2].buffer_address_high; 6941 } else { 6942 trecv->bde.bde_type = SLI4_BDE_TYPE_BLP; 6943 trecv->bde.buffer_length = sgl->size; 6944 trecv->bde.u.blp.sgl_segment_address_low = ocs_addr32_lo(sgl->phys); 6945 trecv->bde.u.blp.sgl_segment_address_high = ocs_addr32_hi(sgl->phys); 6946 } 6947 } 6948 6949 trecv->relative_offset = relative_off; 6950 6951 if (flags & SLI4_IO_CONTINUATION) { 6952 trecv->xc = TRUE; 6953 } 6954 trecv->xri_tag = xri; 6955 6956 trecv->context_tag = rpi; 6957 6958 trecv->pu = TRUE; /* WQE uses relative offset */ 6959 6960 if (flags & SLI4_IO_AUTO_GOOD_RESPONSE) { 6961 trecv->ar = TRUE; 6962 } 6963 6964 trecv->command = SLI4_WQE_FCP_TRECEIVE64; 6965 trecv->class = SLI4_ELS_REQUEST64_CLASS_3; 6966 trecv->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 6967 trecv->dif = dif; 6968 trecv->bs = bs; 6969 6970 trecv->remote_xid = xid; 6971 6972 trecv->request_tag = tag; 6973 6974 trecv->iod = 1; 6975 6976 trecv->len_loc = 0x2; 6977 6978 if (rnode->node_group) { 6979 trecv->hlm = TRUE; 6980 trecv->dword5.dword = rnode->fc_id & 0x00ffffff; 6981 } 6982 6983 trecv->cmd_type = SLI4_CMD_FCP_TRECEIVE64_WQE; 6984 6985 trecv->cq_id = cq_id; 6986 6987 trecv->fcp_data_receive_length = xfer_len; 6988 6989 if (sli4->config.perf_hint) { 6990 trecv->first_data_bde.bde_type = SLI4_BDE_TYPE_BDE_64; 6991 trecv->first_data_bde.buffer_length = sge[first_data_sge].buffer_length; 6992 trecv->first_data_bde.u.data.buffer_address_low = sge[first_data_sge].buffer_address_low; 6993 trecv->first_data_bde.u.data.buffer_address_high = sge[first_data_sge].buffer_address_high; 6994 } 6995 6996 /* The upper 7 bits of csctl is the priority */ 6997 if (csctl & SLI4_MASK_CCP) { 6998 trecv->ccpe = 1; 6999 trecv->ccp = (csctl & SLI4_MASK_CCP); 7000 } 7001 7002 if (app_id && (sli4->config.wqe_size == SLI4_WQE_EXT_BYTES) && !trecv->eat) { 7003 trecv->app_id_valid = 1; 7004 trecv->wqes = 1; 7005 trecv_128->dw[31] = app_id; 7006 } 7007 return 0; 7008} 7009 7010/** 7011 * @ingroup sli_fc 7012 * @brief Write an FCP_CONT_TRECEIVE64_WQE work queue entry. 7013 * 7014 * @param sli4 SLI context. 7015 * @param buf Destination buffer for the WQE. 7016 * @param size Buffer size, in bytes. 7017 * @param sgl DMA memory for the Scatter-Gather List. 7018 * @param first_data_sge Index of first data sge (used if perf hints are enabled) 7019 * @param relative_off Relative offset of the IO (if any). 7020 * @param xfer_len Data transfer length. 7021 * @param xri XRI for this exchange. 7022 * @param sec_xri Secondary XRI for this exchange. (BZ 161832 workaround) 7023 * @param tag IO tag value. 7024 * @param xid OX_ID for the exchange. 7025 * @param cq_id The id of the completion queue where the WQE response is sent. 7026 * @param rpi remote node indicator (RPI) 7027 * @param rnode Destination request (i.e. remote node). 7028 * @param flags Optional attributes, including: 7029 * - ACTIVE - IO is already active. 7030 * - AUTO RSP - Automatically generate a good FCP_RSP. 7031 * @param dif T10 DIF operation, or 0 to disable. 7032 * @param bs T10 DIF block size, or 0 if DIF is disabled. 7033 * @param csctl value of csctl field. 7034 * @param app_id value for VM application header. 7035 * 7036 * @return Returns 0 on success, or a non-zero value on failure. 7037 */ 7038int32_t 7039sli_fcp_cont_treceive64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, uint32_t first_data_sge, 7040 uint32_t relative_off, uint32_t xfer_len, uint16_t xri, uint16_t sec_xri, uint16_t tag, 7041 uint16_t cq_id, uint16_t xid, uint32_t rpi, ocs_remote_node_t *rnode, uint32_t flags, 7042 uint8_t dif, uint8_t bs, uint8_t csctl, uint32_t app_id) 7043{ 7044 int32_t rc; 7045 7046 rc = sli_fcp_treceive64_wqe(sli4, buf, size, sgl, first_data_sge, relative_off, xfer_len, xri, tag, 7047 cq_id, xid, rpi, rnode, flags, dif, bs, csctl, app_id); 7048 if (rc == 0) { 7049 sli4_fcp_treceive64_wqe_t *trecv = buf; 7050 7051 trecv->command = SLI4_WQE_FCP_CONT_TRECEIVE64; 7052 trecv->dword5.sec_xri_tag = sec_xri; 7053 } 7054 return rc; 7055} 7056 7057/** 7058 * @ingroup sli_fc 7059 * @brief Write an FCP_TRSP64_WQE work queue entry. 7060 * 7061 * @param sli4 SLI context. 7062 * @param buf Destination buffer for the WQE. 7063 * @param size Buffer size, in bytes. 7064 * @param sgl DMA memory for the Scatter-Gather List. 7065 * @param rsp_len Response data length. 7066 * @param xri XRI for this exchange. 7067 * @param tag IO tag value. 7068 * @param cq_id The id of the completion queue where the WQE response is sent. 7069 * @param xid OX_ID for the exchange. 7070 * @param rpi remote node indicator (RPI) 7071 * @param rnode Destination request (i.e. remote node). 7072 * @param flags Optional attributes, including: 7073 * - ACTIVE - IO is already active 7074 * - AUTO RSP - Automatically generate a good FCP_RSP. 7075 * @param csctl value of csctl field. 7076 * @param port_owned 0/1 to indicate if the XRI is port owned (used to set XBL=0) 7077 * @param app_id value for VM application header. 7078 * 7079 * @return Returns 0 on success, or a non-zero value on failure. 7080 */ 7081int32_t 7082sli_fcp_trsp64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, uint32_t rsp_len, 7083 uint16_t xri, uint16_t tag, uint16_t cq_id, uint16_t xid, uint32_t rpi, ocs_remote_node_t *rnode, 7084 uint32_t flags, uint8_t csctl, uint8_t port_owned, uint32_t app_id) 7085{ 7086 sli4_fcp_trsp64_wqe_t *trsp = buf; 7087 sli4_fcp_128byte_wqe_t *trsp_128 = buf; 7088 7089 ocs_memset(buf, 0, size); 7090 7091 if (flags & SLI4_IO_AUTO_GOOD_RESPONSE) { 7092 trsp->ag = TRUE; 7093 /* 7094 * The SLI-4 documentation states that the BDE is ignored when 7095 * using auto-good response, but, at least for IF_TYPE 0 devices, 7096 * this does not appear to be true. 7097 */ 7098 if (SLI4_IF_TYPE_BE3_SKH_PF == sli4->if_type) { 7099 trsp->bde.buffer_length = 12; /* byte size of RSP */ 7100 } 7101 } else { 7102 sli4_sge_t *sge = sgl->virt; 7103 7104 if (sli4->config.sgl_pre_registered || port_owned) { 7105 trsp->dbde = TRUE; 7106 } else { 7107 trsp->xbl = TRUE; 7108 } 7109 7110 trsp->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 7111 trsp->bde.buffer_length = sge[0].buffer_length; 7112 trsp->bde.u.data.buffer_address_low = sge[0].buffer_address_low; 7113 trsp->bde.u.data.buffer_address_high = sge[0].buffer_address_high; 7114 7115 trsp->fcp_response_length = rsp_len; 7116 } 7117 7118 if (flags & SLI4_IO_CONTINUATION) { 7119 trsp->xc = TRUE; 7120 } 7121 7122 if (rnode->node_group) { 7123 trsp->hlm = TRUE; 7124 trsp->dword5 = rnode->fc_id & 0x00ffffff; 7125 } 7126 7127 trsp->xri_tag = xri; 7128 trsp->rpi = rpi; 7129 7130 trsp->command = SLI4_WQE_FCP_TRSP64; 7131 trsp->class = SLI4_ELS_REQUEST64_CLASS_3; 7132 7133 trsp->remote_xid = xid; 7134 trsp->request_tag = tag; 7135 trsp->dnrx = ((flags & SLI4_IO_DNRX) == 0 ? 0 : 1); 7136 trsp->len_loc = 0x1; 7137 trsp->cq_id = cq_id; 7138 trsp->cmd_type = SLI4_CMD_FCP_TRSP64_WQE; 7139 7140 /* The upper 7 bits of csctl is the priority */ 7141 if (csctl & SLI4_MASK_CCP) { 7142 trsp->ccpe = 1; 7143 trsp->ccp = (csctl & SLI4_MASK_CCP); 7144 } 7145 7146 if (app_id && (sli4->config.wqe_size == SLI4_WQE_EXT_BYTES) && !trsp->eat) { 7147 trsp->app_id_valid = 1; 7148 trsp->wqes = 1; 7149 trsp_128->dw[31] = app_id; 7150 } 7151 return 0; 7152} 7153 7154/** 7155 * @ingroup sli_fc 7156 * @brief Write an FCP_TSEND64_WQE work queue entry. 7157 * 7158 * @param sli4 SLI context. 7159 * @param buf Destination buffer for the WQE. 7160 * @param size Buffer size, in bytes. 7161 * @param sgl DMA memory for the scatter gather list. 7162 * @param first_data_sge Index of first data sge (used if perf hints are enabled) 7163 * @param relative_off Relative offset of the IO (if any). 7164 * @param xfer_len Data transfer length. 7165 * @param xri XRI for this exchange. 7166 * @param tag IO tag value. 7167 * @param cq_id The id of the completion queue where the WQE response is sent. 7168 * @param xid OX_ID for the exchange. 7169 * @param rpi remote node indicator (RPI) 7170 * @param rnode Destination request (i.e. remote node). 7171 * @param flags Optional attributes, including: 7172 * - ACTIVE - IO is already active. 7173 * - AUTO RSP - Automatically generate a good FCP_RSP. 7174 * @param dif T10 DIF operation, or 0 to disable. 7175 * @param bs T10 DIF block size, or 0 if DIF is disabled. 7176 * @param csctl value of csctl field. 7177 * @param app_id value for VM application header. 7178 * 7179 * @return Returns 0 on success, or a non-zero value on failure. 7180 */ 7181int32_t 7182sli_fcp_tsend64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, uint32_t first_data_sge, 7183 uint32_t relative_off, uint32_t xfer_len, 7184 uint16_t xri, uint16_t tag, uint16_t cq_id, uint16_t xid, uint32_t rpi, ocs_remote_node_t *rnode, 7185 uint32_t flags, uint8_t dif, uint8_t bs, uint8_t csctl, uint32_t app_id) 7186{ 7187 sli4_fcp_tsend64_wqe_t *tsend = buf; 7188 sli4_fcp_128byte_wqe_t *tsend_128 = buf; 7189 sli4_sge_t *sge = NULL; 7190 7191 ocs_memset(buf, 0, size); 7192 7193 if (!sgl || !sgl->virt) { 7194 ocs_log_err(sli4->os, "bad parameter sgl=%p virt=%p\n", 7195 sgl, sgl ? sgl->virt : NULL); 7196 return -1; 7197 } 7198 sge = sgl->virt; 7199 7200 if (sli4->config.sgl_pre_registered) { 7201 tsend->xbl = FALSE; 7202 7203 tsend->dbde = TRUE; 7204 tsend->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 7205 7206 /* TSEND64_WQE specifies first two SGE are skipped 7207 * (i.e. 3rd is valid) */ 7208 tsend->bde.buffer_length = sge[2].buffer_length; 7209 tsend->bde.u.data.buffer_address_low = sge[2].buffer_address_low; 7210 tsend->bde.u.data.buffer_address_high = sge[2].buffer_address_high; 7211 } else { 7212 tsend->xbl = TRUE; 7213 7214 /* if data is a single physical address, use a BDE */ 7215 if (!dif && (xfer_len <= sge[2].buffer_length)) { 7216 tsend->dbde = TRUE; 7217 tsend->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 7218 /* TSEND64_WQE specifies first two SGE are skipped 7219 * (i.e. 3rd is valid) */ 7220 tsend->bde.buffer_length = sge[2].buffer_length; 7221 tsend->bde.u.data.buffer_address_low = sge[2].buffer_address_low; 7222 tsend->bde.u.data.buffer_address_high = sge[2].buffer_address_high; 7223 } else { 7224 tsend->bde.bde_type = SLI4_BDE_TYPE_BLP; 7225 tsend->bde.buffer_length = sgl->size; 7226 tsend->bde.u.blp.sgl_segment_address_low = ocs_addr32_lo(sgl->phys); 7227 tsend->bde.u.blp.sgl_segment_address_high = ocs_addr32_hi(sgl->phys); 7228 } 7229 } 7230 7231 tsend->relative_offset = relative_off; 7232 7233 if (flags & SLI4_IO_CONTINUATION) { 7234 tsend->xc = TRUE; 7235 } 7236 tsend->xri_tag = xri; 7237 7238 tsend->rpi = rpi; 7239 7240 tsend->pu = TRUE; /* WQE uses relative offset */ 7241 7242 if (flags & SLI4_IO_AUTO_GOOD_RESPONSE) { 7243 tsend->ar = TRUE; 7244 } 7245 7246 tsend->command = SLI4_WQE_FCP_TSEND64; 7247 tsend->class = SLI4_ELS_REQUEST64_CLASS_3; 7248 tsend->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 7249 tsend->dif = dif; 7250 tsend->bs = bs; 7251 7252 tsend->remote_xid = xid; 7253 7254 tsend->request_tag = tag; 7255 7256 tsend->len_loc = 0x2; 7257 7258 if (rnode->node_group) { 7259 tsend->hlm = TRUE; 7260 tsend->dword5 = rnode->fc_id & 0x00ffffff; 7261 } 7262 7263 tsend->cq_id = cq_id; 7264 7265 tsend->cmd_type = SLI4_CMD_FCP_TSEND64_WQE; 7266 7267 tsend->fcp_data_transmit_length = xfer_len; 7268 7269 if (sli4->config.perf_hint) { 7270 tsend->first_data_bde.bde_type = SLI4_BDE_TYPE_BDE_64; 7271 tsend->first_data_bde.buffer_length = sge[first_data_sge].buffer_length; 7272 tsend->first_data_bde.u.data.buffer_address_low = sge[first_data_sge].buffer_address_low; 7273 tsend->first_data_bde.u.data.buffer_address_high = sge[first_data_sge].buffer_address_high; 7274 } 7275 7276 /* The upper 7 bits of csctl is the priority */ 7277 if (csctl & SLI4_MASK_CCP) { 7278 tsend->ccpe = 1; 7279 tsend->ccp = (csctl & SLI4_MASK_CCP); 7280 } 7281 7282 if (app_id && (sli4->config.wqe_size == SLI4_WQE_EXT_BYTES) && !tsend->eat) { 7283 tsend->app_id_valid = 1; 7284 tsend->wqes = 1; 7285 tsend_128->dw[31] = app_id; 7286 } 7287 return 0; 7288} 7289 7290/** 7291 * @ingroup sli_fc 7292 * @brief Write a GEN_REQUEST64 work queue entry. 7293 * 7294 * @note This WQE is only used to send FC-CT commands. 7295 * 7296 * @param sli4 SLI context. 7297 * @param buf Destination buffer for the WQE. 7298 * @param size Buffer size, in bytes. 7299 * @param sgl DMA memory for the request. 7300 * @param req_len Length of request. 7301 * @param max_rsp_len Max length of response. 7302 * @param timeout Time, in seconds, before an IO times out. Zero means infinite. 7303 * @param xri XRI for this exchange. 7304 * @param tag IO tag value. 7305 * @param cq_id The id of the completion queue where the WQE response is sent. 7306 * @param rnode Destination of request (that is, the remote node). 7307 * @param r_ctl R_CTL value for sequence. 7308 * @param type TYPE value for sequence. 7309 * @param df_ctl DF_CTL value for sequence. 7310 * 7311 * @return Returns 0 on success, or a non-zero value on failure. 7312 */ 7313int32_t 7314sli_gen_request64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *sgl, 7315 uint32_t req_len, uint32_t max_rsp_len, uint8_t timeout, 7316 uint16_t xri, uint16_t tag, uint16_t cq_id, ocs_remote_node_t *rnode, 7317 uint8_t r_ctl, uint8_t type, uint8_t df_ctl) 7318{ 7319 sli4_gen_request64_wqe_t *gen = buf; 7320 sli4_sge_t *sge = NULL; 7321 7322 ocs_memset(buf, 0, size); 7323 7324 if (!sgl || !sgl->virt) { 7325 ocs_log_err(sli4->os, "bad parameter sgl=%p virt=%p\n", 7326 sgl, sgl ? sgl->virt : NULL); 7327 return -1; 7328 } 7329 sge = sgl->virt; 7330 7331 if (sli4->config.sgl_pre_registered) { 7332 gen->xbl = FALSE; 7333 7334 gen->dbde = TRUE; 7335 gen->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 7336 7337 gen->bde.buffer_length = req_len; 7338 gen->bde.u.data.buffer_address_low = sge[0].buffer_address_low; 7339 gen->bde.u.data.buffer_address_high = sge[0].buffer_address_high; 7340 } else { 7341 gen->xbl = TRUE; 7342 7343 gen->bde.bde_type = SLI4_BDE_TYPE_BLP; 7344 7345 gen->bde.buffer_length = 2 * sizeof(sli4_sge_t); 7346 gen->bde.u.blp.sgl_segment_address_low = ocs_addr32_lo(sgl->phys); 7347 gen->bde.u.blp.sgl_segment_address_high = ocs_addr32_hi(sgl->phys); 7348 } 7349 7350 gen->request_payload_length = req_len; 7351 gen->max_response_payload_length = max_rsp_len; 7352 7353 gen->df_ctl = df_ctl; 7354 gen->type = type; 7355 gen->r_ctl = r_ctl; 7356 7357 gen->xri_tag = xri; 7358 7359 gen->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 7360 gen->context_tag = rnode->indicator; 7361 7362 gen->class = SLI4_ELS_REQUEST64_CLASS_3; 7363 7364 gen->command = SLI4_WQE_GEN_REQUEST64; 7365 7366 gen->timer = timeout; 7367 7368 gen->request_tag = tag; 7369 7370 gen->iod = SLI4_ELS_REQUEST64_DIR_READ; 7371 7372 gen->qosd = TRUE; 7373 7374 if (rnode->node_group) { 7375 gen->hlm = TRUE; 7376 gen->remote_n_port_id = rnode->fc_id & 0x00ffffff; 7377 } 7378 7379 gen->cmd_type = SLI4_CMD_GEN_REQUEST64_WQE; 7380 7381 gen->cq_id = cq_id; 7382 7383 return 0; 7384} 7385 7386/** 7387 * @ingroup sli_fc 7388 * @brief Write a SEND_FRAME work queue entry 7389 * 7390 * @param sli4 SLI context. 7391 * @param buf Destination buffer for the WQE. 7392 * @param size Buffer size, in bytes. 7393 * @param sof Start of frame value 7394 * @param eof End of frame value 7395 * @param hdr Pointer to FC header data 7396 * @param payload DMA memory for the payload. 7397 * @param req_len Length of payload. 7398 * @param timeout Time, in seconds, before an IO times out. Zero means infinite. 7399 * @param xri XRI for this exchange. 7400 * @param req_tag IO tag value. 7401 * 7402 * @return Returns 0 on success, or a non-zero value on failure. 7403 */ 7404int32_t 7405sli_send_frame_wqe(sli4_t *sli4, void *buf, size_t size, uint8_t sof, uint8_t eof, uint32_t *hdr, 7406 ocs_dma_t *payload, uint32_t req_len, uint8_t timeout, 7407 uint16_t xri, uint16_t req_tag) 7408{ 7409 sli4_send_frame_wqe_t *sf = buf; 7410 7411 ocs_memset(buf, 0, size); 7412 7413 sf->dbde = TRUE; 7414 sf->bde.buffer_length = req_len; 7415 sf->bde.u.data.buffer_address_low = ocs_addr32_lo(payload->phys); 7416 sf->bde.u.data.buffer_address_high = ocs_addr32_hi(payload->phys); 7417 7418 /* Copy FC header */ 7419 sf->fc_header_0_1[0] = hdr[0]; 7420 sf->fc_header_0_1[1] = hdr[1]; 7421 sf->fc_header_2_5[0] = hdr[2]; 7422 sf->fc_header_2_5[1] = hdr[3]; 7423 sf->fc_header_2_5[2] = hdr[4]; 7424 sf->fc_header_2_5[3] = hdr[5]; 7425 7426 sf->frame_length = req_len; 7427 7428 sf->xri_tag = xri; 7429 sf->pu = 0; 7430 sf->context_tag = 0; 7431 7432 sf->ct = 0; 7433 sf->command = SLI4_WQE_SEND_FRAME; 7434 sf->class = SLI4_ELS_REQUEST64_CLASS_3; 7435 sf->timer = timeout; 7436 7437 sf->request_tag = req_tag; 7438 sf->eof = eof; 7439 sf->sof = sof; 7440 7441 sf->qosd = 0; 7442 sf->lenloc = 1; 7443 sf->xc = 0; 7444 7445 sf->xbl = 1; 7446 7447 sf->cmd_type = SLI4_CMD_SEND_FRAME_WQE; 7448 sf->cq_id = 0xffff; 7449 7450 return 0; 7451} 7452 7453/** 7454 * @ingroup sli_fc 7455 * @brief Write a XMIT_SEQUENCE64 work queue entry. 7456 * 7457 * This WQE is used to send FC-CT response frames. 7458 * 7459 * @note This API implements a restricted use for this WQE, a TODO: would 7460 * include passing in sequence initiative, and full SGL's 7461 * 7462 * @param sli4 SLI context. 7463 * @param buf Destination buffer for the WQE. 7464 * @param size Buffer size, in bytes. 7465 * @param payload DMA memory for the request. 7466 * @param payload_len Length of request. 7467 * @param timeout Time, in seconds, before an IO times out. Zero means infinite. 7468 * @param ox_id originator exchange ID 7469 * @param xri XRI for this exchange. 7470 * @param tag IO tag value. 7471 * @param rnode Destination of request (that is, the remote node). 7472 * @param r_ctl R_CTL value for sequence. 7473 * @param type TYPE value for sequence. 7474 * @param df_ctl DF_CTL value for sequence. 7475 * 7476 * @return Returns 0 on success, or a non-zero value on failure. 7477 */ 7478int32_t 7479sli_xmit_sequence64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *payload, 7480 uint32_t payload_len, uint8_t timeout, uint16_t ox_id, 7481 uint16_t xri, uint16_t tag, ocs_remote_node_t *rnode, 7482 uint8_t r_ctl, uint8_t type, uint8_t df_ctl) 7483{ 7484 sli4_xmit_sequence64_wqe_t *xmit = buf; 7485 7486 ocs_memset(buf, 0, size); 7487 7488 if ((payload == NULL) || (payload->virt == NULL)) { 7489 ocs_log_err(sli4->os, "bad parameter sgl=%p virt=%p\n", 7490 payload, payload ? payload->virt : NULL); 7491 return -1; 7492 } 7493 7494 if (sli4->config.sgl_pre_registered) { 7495 xmit->dbde = TRUE; 7496 } else { 7497 xmit->xbl = TRUE; 7498 } 7499 7500 xmit->bde.bde_type = SLI4_BDE_TYPE_BDE_64; 7501 xmit->bde.buffer_length = payload_len; 7502 xmit->bde.u.data.buffer_address_low = ocs_addr32_lo(payload->phys); 7503 xmit->bde.u.data.buffer_address_high = ocs_addr32_hi(payload->phys); 7504 xmit->sequence_payload_len = payload_len; 7505 7506 xmit->remote_n_port_id = rnode->fc_id & 0x00ffffff; 7507 7508 xmit->relative_offset = 0; 7509 7510 xmit->si = 0; /* sequence initiative - this matches what is seen from 7511 * FC switches in response to FCGS commands */ 7512 xmit->ft = 0; /* force transmit */ 7513 xmit->xo = 0; /* exchange responder */ 7514 xmit->ls = 1; /* last in seqence */ 7515 xmit->df_ctl = df_ctl; 7516 xmit->type = type; 7517 xmit->r_ctl = r_ctl; 7518 7519 xmit->xri_tag = xri; 7520 xmit->context_tag = rnode->indicator; 7521 7522 xmit->dif = 0; 7523 xmit->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 7524 xmit->bs = 0; 7525 7526 xmit->command = SLI4_WQE_XMIT_SEQUENCE64; 7527 xmit->class = SLI4_ELS_REQUEST64_CLASS_3; 7528 xmit->pu = 0; 7529 xmit->timer = timeout; 7530 7531 xmit->abort_tag = 0; 7532 xmit->request_tag = tag; 7533 xmit->remote_xid = ox_id; 7534 7535 xmit->iod = SLI4_ELS_REQUEST64_DIR_READ; 7536 7537 if (rnode->node_group) { 7538 xmit->hlm = TRUE; 7539 xmit->remote_n_port_id = rnode->fc_id & 0x00ffffff; 7540 } 7541 7542 xmit->cmd_type = SLI4_CMD_XMIT_SEQUENCE64_WQE; 7543 7544 xmit->len_loc = 2; 7545 7546 xmit->cq_id = 0xFFFF; 7547 7548 return 0; 7549} 7550 7551/** 7552 * @ingroup sli_fc 7553 * @brief Write a REQUEUE_XRI_WQE work queue entry. 7554 * 7555 * @param sli4 SLI context. 7556 * @param buf Destination buffer for the WQE. 7557 * @param size Buffer size, in bytes. 7558 * @param xri XRI for this exchange. 7559 * @param tag IO tag value. 7560 * @param cq_id The id of the completion queue where the WQE response is sent. 7561 * 7562 * @return Returns 0 on success, or a non-zero value on failure. 7563 */ 7564int32_t 7565sli_requeue_xri_wqe(sli4_t *sli4, void *buf, size_t size, uint16_t xri, uint16_t tag, uint16_t cq_id) 7566{ 7567 sli4_requeue_xri_wqe_t *requeue = buf; 7568 7569 ocs_memset(buf, 0, size); 7570 7571 requeue->command = SLI4_WQE_REQUEUE_XRI; 7572 requeue->xri_tag = xri; 7573 requeue->request_tag = tag; 7574 requeue->xc = 1; 7575 requeue->qosd = 1; 7576 requeue->cq_id = cq_id; 7577 requeue->cmd_type = SLI4_CMD_REQUEUE_XRI_WQE; 7578 return 0; 7579} 7580 7581int32_t 7582sli_xmit_bcast64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *payload, 7583 uint32_t payload_len, uint8_t timeout, uint16_t xri, uint16_t tag, 7584 uint16_t cq_id, ocs_remote_node_t *rnode, 7585 uint8_t r_ctl, uint8_t type, uint8_t df_ctl) 7586{ 7587 sli4_xmit_bcast64_wqe_t *bcast = buf; 7588 7589 /* Command requires a temporary RPI (i.e. unused remote node) */ 7590 if (rnode->attached) { 7591 ocs_log_test(sli4->os, "remote node %d in use\n", rnode->indicator); 7592 return -1; 7593 } 7594 7595 ocs_memset(buf, 0, size); 7596 7597 bcast->dbde = TRUE; 7598 bcast->sequence_payload.bde_type = SLI4_BDE_TYPE_BDE_64; 7599 bcast->sequence_payload.buffer_length = payload_len; 7600 bcast->sequence_payload.u.data.buffer_address_low = ocs_addr32_lo(payload->phys); 7601 bcast->sequence_payload.u.data.buffer_address_high = ocs_addr32_hi(payload->phys); 7602 7603 bcast->sequence_payload_length = payload_len; 7604 7605 bcast->df_ctl = df_ctl; 7606 bcast->type = type; 7607 bcast->r_ctl = r_ctl; 7608 7609 bcast->xri_tag = xri; 7610 7611 bcast->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 7612 bcast->context_tag = rnode->sport->indicator; 7613 7614 bcast->class = SLI4_ELS_REQUEST64_CLASS_3; 7615 7616 bcast->command = SLI4_WQE_XMIT_BCAST64; 7617 7618 bcast->timer = timeout; 7619 7620 bcast->request_tag = tag; 7621 7622 bcast->temporary_rpi = rnode->indicator; 7623 7624 bcast->len_loc = 0x1; 7625 7626 bcast->iod = SLI4_ELS_REQUEST64_DIR_WRITE; 7627 7628 bcast->cmd_type = SLI4_CMD_XMIT_BCAST64_WQE; 7629 7630 bcast->cq_id = cq_id; 7631 7632 return 0; 7633} 7634 7635/** 7636 * @ingroup sli_fc 7637 * @brief Write an XMIT_BLS_RSP64_WQE work queue entry. 7638 * 7639 * @param sli4 SLI context. 7640 * @param buf Destination buffer for the WQE. 7641 * @param size Buffer size, in bytes. 7642 * @param payload Contents of the BLS payload to be sent. 7643 * @param xri XRI for this exchange. 7644 * @param tag IO tag value. 7645 * @param cq_id The id of the completion queue where the WQE response is sent. 7646 * @param rnode Destination of request (that is, the remote node). 7647 * @param s_id Source ID to use in the response. If UINT32_MAX, use SLI Port's ID. 7648 * 7649 * @return Returns 0 on success, or a non-zero value on failure. 7650 */ 7651int32_t 7652sli_xmit_bls_rsp64_wqe(sli4_t *sli4, void *buf, size_t size, sli_bls_payload_t *payload, 7653 uint16_t xri, uint16_t tag, uint16_t cq_id, ocs_remote_node_t *rnode, uint32_t s_id) 7654{ 7655 sli4_xmit_bls_rsp_wqe_t *bls = buf; 7656 7657 /* 7658 * Callers can either specify RPI or S_ID, but not both 7659 */ 7660 if (rnode->attached && (s_id != UINT32_MAX)) { 7661 ocs_log_test(sli4->os, "S_ID specified for attached remote node %d\n", 7662 rnode->indicator); 7663 return -1; 7664 } 7665 7666 ocs_memset(buf, 0, size); 7667 7668 if (SLI_BLS_ACC == payload->type) { 7669 bls->payload_word0 = (payload->u.acc.seq_id_last << 16) | 7670 (payload->u.acc.seq_id_validity << 24); 7671 bls->high_seq_cnt = payload->u.acc.high_seq_cnt; 7672 bls->low_seq_cnt = payload->u.acc.low_seq_cnt; 7673 } else if (SLI_BLS_RJT == payload->type) { 7674 bls->payload_word0 = *((uint32_t *)&payload->u.rjt); 7675 bls->ar = TRUE; 7676 } else { 7677 ocs_log_test(sli4->os, "bad BLS type %#x\n", 7678 payload->type); 7679 return -1; 7680 } 7681 7682 bls->ox_id = payload->ox_id; 7683 bls->rx_id = payload->rx_id; 7684 7685 if (rnode->attached) { 7686 bls->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 7687 bls->context_tag = rnode->indicator; 7688 } else { 7689 bls->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 7690 bls->context_tag = rnode->sport->indicator; 7691 7692 if (UINT32_MAX != s_id) { 7693 bls->local_n_port_id = s_id & 0x00ffffff; 7694 } else { 7695 bls->local_n_port_id = rnode->sport->fc_id & 0x00ffffff; 7696 } 7697 bls->remote_id = rnode->fc_id & 0x00ffffff; 7698 7699 bls->temporary_rpi = rnode->indicator; 7700 } 7701 7702 bls->xri_tag = xri; 7703 7704 bls->class = SLI4_ELS_REQUEST64_CLASS_3; 7705 7706 bls->command = SLI4_WQE_XMIT_BLS_RSP; 7707 7708 bls->request_tag = tag; 7709 7710 bls->qosd = TRUE; 7711 7712 if (rnode->node_group) { 7713 bls->hlm = TRUE; 7714 bls->remote_id = rnode->fc_id & 0x00ffffff; 7715 } 7716 7717 bls->cq_id = cq_id; 7718 7719 bls->cmd_type = SLI4_CMD_XMIT_BLS_RSP64_WQE; 7720 7721 return 0; 7722} 7723 7724/** 7725 * @ingroup sli_fc 7726 * @brief Write a XMIT_ELS_RSP64_WQE work queue entry. 7727 * 7728 * @param sli4 SLI context. 7729 * @param buf Destination buffer for the WQE. 7730 * @param size Buffer size, in bytes. 7731 * @param rsp DMA memory for the ELS response. 7732 * @param rsp_len Length of ELS response, in bytes. 7733 * @param xri XRI for this exchange. 7734 * @param tag IO tag value. 7735 * @param cq_id The id of the completion queue where the WQE response is sent. 7736 * @param ox_id OX_ID of the exchange containing the request. 7737 * @param rnode Destination of the ELS response (that is, the remote node). 7738 * @param flags Optional attributes, including: 7739 * - SLI4_IO_CONTINUATION - IO is already active. 7740 * @param s_id S_ID used for special responses. 7741 * 7742 * @return Returns 0 on success, or a non-zero value on failure. 7743 */ 7744int32_t 7745sli_xmit_els_rsp64_wqe(sli4_t *sli4, void *buf, size_t size, ocs_dma_t *rsp, 7746 uint32_t rsp_len, uint16_t xri, uint16_t tag, uint16_t cq_id, 7747 uint16_t ox_id, ocs_remote_node_t *rnode, uint32_t flags, uint32_t s_id) 7748{ 7749 sli4_xmit_els_rsp64_wqe_t *els = buf; 7750 7751 ocs_memset(buf, 0, size); 7752 7753 if (sli4->config.sgl_pre_registered) { 7754 els->dbde = TRUE; 7755 } else { 7756 els->xbl = TRUE; 7757 } 7758 7759 els->els_response_payload.bde_type = SLI4_BDE_TYPE_BDE_64; 7760 els->els_response_payload.buffer_length = rsp_len; 7761 els->els_response_payload.u.data.buffer_address_low = ocs_addr32_lo(rsp->phys); 7762 els->els_response_payload.u.data.buffer_address_high = ocs_addr32_hi(rsp->phys); 7763 7764 els->els_response_payload_length = rsp_len; 7765 7766 els->xri_tag = xri; 7767 7768 els->class = SLI4_ELS_REQUEST64_CLASS_3; 7769 7770 els->command = SLI4_WQE_ELS_RSP64; 7771 7772 els->request_tag = tag; 7773 7774 els->ox_id = ox_id; 7775 7776 els->iod = SLI4_ELS_REQUEST64_DIR_WRITE; 7777 7778 els->qosd = TRUE; 7779 7780 if (flags & SLI4_IO_CONTINUATION) { 7781 els->xc = TRUE; 7782 } 7783 7784 if (rnode->attached) { 7785 els->ct = SLI4_ELS_REQUEST64_CONTEXT_RPI; 7786 els->context_tag = rnode->indicator; 7787 } else { 7788 els->ct = SLI4_ELS_REQUEST64_CONTEXT_VPI; 7789 els->context_tag = rnode->sport->indicator; 7790 els->remote_id = rnode->fc_id & 0x00ffffff; 7791 els->temporary_rpi = rnode->indicator; 7792 if (UINT32_MAX != s_id) { 7793 els->sp = TRUE; 7794 els->s_id = s_id & 0x00ffffff; 7795 } 7796 } 7797 7798 if (rnode->node_group) { 7799 els->hlm = TRUE; 7800 els->remote_id = rnode->fc_id & 0x00ffffff; 7801 } 7802 7803 els->cmd_type = SLI4_ELS_REQUEST64_CMD_GEN; 7804 7805 els->cq_id = cq_id; 7806 7807 return 0; 7808} 7809 7810/** 7811 * @ingroup sli_fc 7812 * @brief Process an asynchronous Link State event entry. 7813 * 7814 * @par Description 7815 * Parses Asynchronous Completion Queue Entry (ACQE), 7816 * creates an abstracted event, and calls registered callback functions. 7817 * 7818 * @param sli4 SLI context. 7819 * @param acqe Pointer to the ACQE. 7820 * 7821 * @return Returns 0 on success, or a non-zero value on failure. 7822 */ 7823int32_t 7824sli_fc_process_link_state(sli4_t *sli4, void *acqe) 7825{ 7826 sli4_link_state_t *link_state = acqe; 7827 sli4_link_event_t event = { 0 }; 7828 int32_t rc = 0; 7829 7830 if (!sli4->link) { 7831 /* bail if there is no callback */ 7832 return 0; 7833 } 7834 7835 if (SLI4_LINK_TYPE_ETHERNET == link_state->link_type) { 7836 event.topology = SLI_LINK_TOPO_NPORT; 7837 event.medium = SLI_LINK_MEDIUM_ETHERNET; 7838 } else { 7839 /* TODO is this supported for anything other than FCoE? */ 7840 ocs_log_test(sli4->os, "unsupported link type %#x\n", 7841 link_state->link_type); 7842 event.topology = SLI_LINK_TOPO_MAX; 7843 event.medium = SLI_LINK_MEDIUM_MAX; 7844 rc = -1; 7845 } 7846 7847 switch (link_state->port_link_status) { 7848 case SLI4_PORT_LINK_STATUS_PHYSICAL_DOWN: 7849 case SLI4_PORT_LINK_STATUS_LOGICAL_DOWN: 7850 event.status = SLI_LINK_STATUS_DOWN; 7851 break; 7852 case SLI4_PORT_LINK_STATUS_PHYSICAL_UP: 7853 case SLI4_PORT_LINK_STATUS_LOGICAL_UP: 7854 event.status = SLI_LINK_STATUS_UP; 7855 break; 7856 default: 7857 ocs_log_test(sli4->os, "unsupported link status %#x\n", 7858 link_state->port_link_status); 7859 event.status = SLI_LINK_STATUS_MAX; 7860 rc = -1; 7861 } 7862 7863 switch (link_state->port_speed) { 7864 case 0: 7865 event.speed = 0; 7866 break; 7867 case 1: 7868 event.speed = 10; 7869 break; 7870 case 2: 7871 event.speed = 100; 7872 break; 7873 case 3: 7874 event.speed = 1000; 7875 break; 7876 case 4: 7877 event.speed = 10000; 7878 break; 7879 case 5: 7880 event.speed = 20000; 7881 break; 7882 case 6: 7883 event.speed = 25000; 7884 break; 7885 case 7: 7886 event.speed = 40000; 7887 break; 7888 case 8: 7889 event.speed = 100000; 7890 break; 7891 default: 7892 ocs_log_test(sli4->os, "unsupported port_speed %#x\n", 7893 link_state->port_speed); 7894 rc = -1; 7895 } 7896 7897 sli4->link(sli4->link_arg, (void *)&event); 7898 7899 return rc; 7900} 7901 7902/** 7903 * @ingroup sli_fc 7904 * @brief Process an asynchronous Link Attention event entry. 7905 * 7906 * @par Description 7907 * Parses Asynchronous Completion Queue Entry (ACQE), 7908 * creates an abstracted event, and calls the registered callback functions. 7909 * 7910 * @param sli4 SLI context. 7911 * @param acqe Pointer to the ACQE. 7912 * 7913 * @todo XXX all events return LINK_UP. 7914 * 7915 * @return Returns 0 on success, or a non-zero value on failure. 7916 */ 7917int32_t 7918sli_fc_process_link_attention(sli4_t *sli4, void *acqe) 7919{ 7920 sli4_link_attention_t *link_attn = acqe; 7921 sli4_link_event_t event = { 0 }; 7922 7923 ocs_log_debug(sli4->os, "link_number=%d attn_type=%#x topology=%#x port_speed=%#x " 7924 "port_fault=%#x shared_link_status=%#x logical_link_speed=%#x " 7925 "event_tag=%#x\n", link_attn->link_number, link_attn->attn_type, 7926 link_attn->topology, link_attn->port_speed, link_attn->port_fault, 7927 link_attn->shared_link_status, link_attn->logical_link_speed, 7928 link_attn->event_tag); 7929 7930 if (!sli4->link) { 7931 return 0; 7932 } 7933 7934 event.medium = SLI_LINK_MEDIUM_FC; 7935 7936 switch (link_attn->attn_type) { 7937 case SLI4_LINK_ATTN_TYPE_LINK_UP: 7938 event.status = SLI_LINK_STATUS_UP; 7939 break; 7940 case SLI4_LINK_ATTN_TYPE_LINK_DOWN: 7941 event.status = SLI_LINK_STATUS_DOWN; 7942 break; 7943 case SLI4_LINK_ATTN_TYPE_NO_HARD_ALPA: 7944 ocs_log_debug(sli4->os, "attn_type: no hard alpa\n"); 7945 event.status = SLI_LINK_STATUS_NO_ALPA; 7946 break; 7947 default: 7948 ocs_log_test(sli4->os, "attn_type: unknown\n"); 7949 break; 7950 } 7951 7952 switch (link_attn->event_type) { 7953 case SLI4_FC_EVENT_LINK_ATTENTION: 7954 break; 7955 case SLI4_FC_EVENT_SHARED_LINK_ATTENTION: 7956 ocs_log_debug(sli4->os, "event_type: FC shared link event \n"); 7957 break; 7958 default: 7959 ocs_log_test(sli4->os, "event_type: unknown\n"); 7960 break; 7961 } 7962 7963 switch (link_attn->topology) { 7964 case SLI4_LINK_ATTN_P2P: 7965 event.topology = SLI_LINK_TOPO_NPORT; 7966 break; 7967 case SLI4_LINK_ATTN_FC_AL: 7968 event.topology = SLI_LINK_TOPO_LOOP; 7969 break; 7970 case SLI4_LINK_ATTN_INTERNAL_LOOPBACK: 7971 ocs_log_debug(sli4->os, "topology Internal loopback\n"); 7972 event.topology = SLI_LINK_TOPO_LOOPBACK_INTERNAL; 7973 break; 7974 case SLI4_LINK_ATTN_SERDES_LOOPBACK: 7975 ocs_log_debug(sli4->os, "topology serdes loopback\n"); 7976 event.topology = SLI_LINK_TOPO_LOOPBACK_EXTERNAL; 7977 break; 7978 default: 7979 ocs_log_test(sli4->os, "topology: unknown\n"); 7980 break; 7981 } 7982 7983 event.speed = link_attn->port_speed * 1000; 7984 7985 sli4->link(sli4->link_arg, (void *)&event); 7986 7987 return 0; 7988} 7989 7990/** 7991 * @ingroup sli_fc 7992 * @brief Parse an FC/FCoE work queue CQ entry. 7993 * 7994 * @param sli4 SLI context. 7995 * @param cq CQ to process. 7996 * @param cqe Pointer to the CQ entry. 7997 * @param etype CQ event type. 7998 * @param r_id Resource ID associated with this completion message (such as the IO tag). 7999 * 8000 * @return Returns 0 on success, or a non-zero value on failure. 8001 */ 8002int32_t 8003sli_fc_cqe_parse(sli4_t *sli4, sli4_queue_t *cq, uint8_t *cqe, sli4_qentry_e *etype, 8004 uint16_t *r_id) 8005{ 8006 uint8_t code = cqe[SLI4_CQE_CODE_OFFSET]; 8007 int32_t rc = -1; 8008 8009 switch (code) { 8010 case SLI4_CQE_CODE_WORK_REQUEST_COMPLETION: 8011 { 8012 sli4_fc_wcqe_t *wcqe = (void *)cqe; 8013 8014 *etype = SLI_QENTRY_WQ; 8015 *r_id = wcqe->request_tag; 8016 rc = wcqe->status; 8017 8018 /* Flag errors except for FCP_RSP_FAILURE */ 8019 if (rc && (rc != SLI4_FC_WCQE_STATUS_FCP_RSP_FAILURE)) { 8020 ocs_log_test(sli4->os, "WCQE: status=%#x hw_status=%#x tag=%#x w1=%#x w2=%#x xb=%d\n", 8021 wcqe->status, wcqe->hw_status, 8022 wcqe->request_tag, wcqe->wqe_specific_1, 8023 wcqe->wqe_specific_2, wcqe->xb); 8024 ocs_log_test(sli4->os, " %08X %08X %08X %08X\n", ((uint32_t*) cqe)[0], ((uint32_t*) cqe)[1], 8025 ((uint32_t*) cqe)[2], ((uint32_t*) cqe)[3]); 8026 } 8027 8028 /* TODO: need to pass additional status back out of here as well 8029 * as status (could overload rc as status/addlstatus are only 8 bits each) 8030 */ 8031 8032 break; 8033 } 8034 case SLI4_CQE_CODE_RQ_ASYNC: 8035 { 8036 sli4_fc_async_rcqe_t *rcqe = (void *)cqe; 8037 8038 *etype = SLI_QENTRY_RQ; 8039 *r_id = rcqe->rq_id; 8040 rc = rcqe->status; 8041 break; 8042 } 8043 case SLI4_CQE_CODE_RQ_ASYNC_V1: 8044 { 8045 sli4_fc_async_rcqe_v1_t *rcqe = (void *)cqe; 8046 8047 *etype = SLI_QENTRY_RQ; 8048 *r_id = rcqe->rq_id; 8049 rc = rcqe->status; 8050 break; 8051 } 8052 case SLI4_CQE_CODE_OPTIMIZED_WRITE_CMD: 8053 { 8054 sli4_fc_optimized_write_cmd_cqe_t *optcqe = (void *)cqe; 8055 8056 *etype = SLI_QENTRY_OPT_WRITE_CMD; 8057 *r_id = optcqe->rq_id; 8058 rc = optcqe->status; 8059 break; 8060 } 8061 case SLI4_CQE_CODE_OPTIMIZED_WRITE_DATA: 8062 { 8063 sli4_fc_optimized_write_data_cqe_t *dcqe = (void *)cqe; 8064 8065 *etype = SLI_QENTRY_OPT_WRITE_DATA; 8066 *r_id = dcqe->xri; 8067 rc = dcqe->status; 8068 8069 /* Flag errors */ 8070 if (rc != SLI4_FC_WCQE_STATUS_SUCCESS) { 8071 ocs_log_test(sli4->os, "Optimized DATA CQE: status=%#x hw_status=%#x xri=%#x dpl=%#x w3=%#x xb=%d\n", 8072 dcqe->status, dcqe->hw_status, 8073 dcqe->xri, dcqe->total_data_placed, 8074 ((uint32_t*) cqe)[3], dcqe->xb); 8075 } 8076 break; 8077 } 8078 case SLI4_CQE_CODE_RQ_COALESCING: 8079 { 8080 sli4_fc_coalescing_rcqe_t *rcqe = (void *)cqe; 8081 8082 *etype = SLI_QENTRY_RQ; 8083 *r_id = rcqe->rq_id; 8084 rc = rcqe->status; 8085 break; 8086 } 8087 case SLI4_CQE_CODE_XRI_ABORTED: 8088 { 8089 sli4_fc_xri_aborted_cqe_t *xa = (void *)cqe; 8090 8091 *etype = SLI_QENTRY_XABT; 8092 *r_id = xa->xri; 8093 rc = 0; 8094 break; 8095 } 8096 case SLI4_CQE_CODE_RELEASE_WQE: { 8097 sli4_fc_wqec_t *wqec = (void*) cqe; 8098 8099 *etype = SLI_QENTRY_WQ_RELEASE; 8100 *r_id = wqec->wq_id; 8101 rc = 0; 8102 break; 8103 } 8104 default: 8105 ocs_log_test(sli4->os, "CQE completion code %d not handled\n", code); 8106 *etype = SLI_QENTRY_MAX; 8107 *r_id = UINT16_MAX; 8108 } 8109 8110 return rc; 8111} 8112 8113/** 8114 * @ingroup sli_fc 8115 * @brief Return the ELS/CT response length. 8116 * 8117 * @param sli4 SLI context. 8118 * @param cqe Pointer to the CQ entry. 8119 * 8120 * @return Returns the length, in bytes. 8121 */ 8122uint32_t 8123sli_fc_response_length(sli4_t *sli4, uint8_t *cqe) 8124{ 8125 sli4_fc_wcqe_t *wcqe = (void *)cqe; 8126 8127 return wcqe->wqe_specific_1; 8128} 8129 8130/** 8131 * @ingroup sli_fc 8132 * @brief Return the FCP IO length. 8133 * 8134 * @param sli4 SLI context. 8135 * @param cqe Pointer to the CQ entry. 8136 * 8137 * @return Returns the length, in bytes. 8138 */ 8139uint32_t 8140sli_fc_io_length(sli4_t *sli4, uint8_t *cqe) 8141{ 8142 sli4_fc_wcqe_t *wcqe = (void *)cqe; 8143 8144 return wcqe->wqe_specific_1; 8145} 8146 8147/** 8148 * @ingroup sli_fc 8149 * @brief Retrieve the D_ID from the completion. 8150 * 8151 * @param sli4 SLI context. 8152 * @param cqe Pointer to the CQ entry. 8153 * @param d_id Pointer where the D_ID is written. 8154 * 8155 * @return Returns 0 on success, or a non-zero value on failure. 8156 */ 8157int32_t 8158sli_fc_els_did(sli4_t *sli4, uint8_t *cqe, uint32_t *d_id) 8159{ 8160 sli4_fc_wcqe_t *wcqe = (void *)cqe; 8161 8162 *d_id = 0; 8163 8164 if (wcqe->status) { 8165 return -1; 8166 } else { 8167 *d_id = wcqe->wqe_specific_2 & 0x00ffffff; 8168 return 0; 8169 } 8170} 8171 8172uint32_t 8173sli_fc_ext_status(sli4_t *sli4, uint8_t *cqe) 8174{ 8175 sli4_fc_wcqe_t *wcqe = (void *)cqe; 8176 uint32_t mask; 8177 8178 switch (wcqe->status) { 8179 case SLI4_FC_WCQE_STATUS_FCP_RSP_FAILURE: 8180 mask = UINT32_MAX; 8181 break; 8182 case SLI4_FC_WCQE_STATUS_LOCAL_REJECT: 8183 case SLI4_FC_WCQE_STATUS_CMD_REJECT: 8184 mask = 0xff; 8185 break; 8186 case SLI4_FC_WCQE_STATUS_NPORT_RJT: 8187 case SLI4_FC_WCQE_STATUS_FABRIC_RJT: 8188 case SLI4_FC_WCQE_STATUS_NPORT_BSY: 8189 case SLI4_FC_WCQE_STATUS_FABRIC_BSY: 8190 case SLI4_FC_WCQE_STATUS_LS_RJT: 8191 mask = UINT32_MAX; 8192 break; 8193 case SLI4_FC_WCQE_STATUS_DI_ERROR: 8194 mask = UINT32_MAX; 8195 break; 8196 default: 8197 mask = 0; 8198 } 8199 8200 return wcqe->wqe_specific_2 & mask; 8201} 8202 8203/** 8204 * @ingroup sli_fc 8205 * @brief Retrieve the RQ index from the completion. 8206 * 8207 * @param sli4 SLI context. 8208 * @param cqe Pointer to the CQ entry. 8209 * @param rq_id Pointer where the rq_id is written. 8210 * @param index Pointer where the index is written. 8211 * 8212 * @return Returns 0 on success, or a non-zero value on failure. 8213 */ 8214int32_t 8215sli_fc_rqe_rqid_and_index(sli4_t *sli4, uint8_t *cqe, uint16_t *rq_id, uint32_t *index) 8216{ 8217 sli4_fc_async_rcqe_t *rcqe = (void *)cqe; 8218 sli4_fc_async_rcqe_v1_t *rcqe_v1 = (void *)cqe; 8219 int32_t rc = -1; 8220 uint8_t code = 0; 8221 8222 *rq_id = 0; 8223 *index = UINT32_MAX; 8224 8225 code = cqe[SLI4_CQE_CODE_OFFSET]; 8226 8227 if (code == SLI4_CQE_CODE_RQ_ASYNC) { 8228 *rq_id = rcqe->rq_id; 8229 if (SLI4_FC_ASYNC_RQ_SUCCESS == rcqe->status) { 8230 *index = rcqe->rq_element_index; 8231 rc = 0; 8232 } else { 8233 *index = rcqe->rq_element_index; 8234 rc = rcqe->status; 8235 ocs_log_test(sli4->os, "status=%02x (%s) rq_id=%d, index=%x pdpl=%x sof=%02x eof=%02x hdpl=%x\n", 8236 rcqe->status, sli_fc_get_status_string(rcqe->status), rcqe->rq_id, 8237 rcqe->rq_element_index, rcqe->payload_data_placement_length, rcqe->sof_byte, 8238 rcqe->eof_byte, rcqe->header_data_placement_length); 8239 } 8240 } else if (code == SLI4_CQE_CODE_RQ_ASYNC_V1) { 8241 *rq_id = rcqe_v1->rq_id; 8242 if (SLI4_FC_ASYNC_RQ_SUCCESS == rcqe_v1->status) { 8243 *index = rcqe_v1->rq_element_index; 8244 rc = 0; 8245 } else { 8246 *index = rcqe_v1->rq_element_index; 8247 rc = rcqe_v1->status; 8248 ocs_log_test(sli4->os, "status=%02x (%s) rq_id=%d, index=%x pdpl=%x sof=%02x eof=%02x hdpl=%x\n", 8249 rcqe_v1->status, sli_fc_get_status_string(rcqe_v1->status), 8250 rcqe_v1->rq_id, rcqe_v1->rq_element_index, 8251 rcqe_v1->payload_data_placement_length, rcqe_v1->sof_byte, 8252 rcqe_v1->eof_byte, rcqe_v1->header_data_placement_length); 8253 } 8254 } else if (code == SLI4_CQE_CODE_OPTIMIZED_WRITE_CMD) { 8255 sli4_fc_optimized_write_cmd_cqe_t *optcqe = (void *)cqe; 8256 8257 *rq_id = optcqe->rq_id; 8258 if (SLI4_FC_ASYNC_RQ_SUCCESS == optcqe->status) { 8259 *index = optcqe->rq_element_index; 8260 rc = 0; 8261 } else { 8262 *index = optcqe->rq_element_index; 8263 rc = optcqe->status; 8264 ocs_log_test(sli4->os, "status=%02x (%s) rq_id=%d, index=%x pdpl=%x hdpl=%x oox=%d agxr=%d xri=0x%x rpi=0x%x\n", 8265 optcqe->status, sli_fc_get_status_string(optcqe->status), optcqe->rq_id, 8266 optcqe->rq_element_index, optcqe->payload_data_placement_length, 8267 optcqe->header_data_placement_length, optcqe->oox, optcqe->agxr, optcqe->xri, 8268 optcqe->rpi); 8269 } 8270 } else if (code == SLI4_CQE_CODE_RQ_COALESCING) { 8271 sli4_fc_coalescing_rcqe_t *rcqe = (void *)cqe; 8272 8273 *rq_id = rcqe->rq_id; 8274 if (SLI4_FC_COALESCE_RQ_SUCCESS == rcqe->status) { 8275 *index = rcqe->rq_element_index; 8276 rc = 0; 8277 } else { 8278 *index = UINT32_MAX; 8279 rc = rcqe->status; 8280 8281 ocs_log_test(sli4->os, "status=%02x (%s) rq_id=%d, index=%x rq_id=%#x sdpl=%x\n", 8282 rcqe->status, sli_fc_get_status_string(rcqe->status), rcqe->rq_id, 8283 rcqe->rq_element_index, rcqe->rq_id, rcqe->sequence_reporting_placement_length); 8284 } 8285 } else { 8286 *index = UINT32_MAX; 8287 8288 rc = rcqe->status; 8289 8290 ocs_log_debug(sli4->os, "status=%02x rq_id=%d, index=%x pdpl=%x sof=%02x eof=%02x hdpl=%x\n", 8291 rcqe->status, rcqe->rq_id, rcqe->rq_element_index, rcqe->payload_data_placement_length, 8292 rcqe->sof_byte, rcqe->eof_byte, rcqe->header_data_placement_length); 8293 } 8294 8295 return rc; 8296} 8297 8298/** 8299 * @ingroup sli_fc 8300 * @brief Process an asynchronous FCoE event entry. 8301 * 8302 * @par Description 8303 * Parses Asynchronous Completion Queue Entry (ACQE), 8304 * creates an abstracted event, and calls the registered callback functions. 8305 * 8306 * @param sli4 SLI context. 8307 * @param acqe Pointer to the ACQE. 8308 * 8309 * @return Returns 0 on success, or a non-zero value on failure. 8310 */ 8311int32_t 8312sli_fc_process_fcoe(sli4_t *sli4, void *acqe) 8313{ 8314 sli4_fcoe_fip_t *fcoe = acqe; 8315 sli4_fip_event_t event = { 0 }; 8316 uint32_t mask = UINT32_MAX; 8317 8318 ocs_log_debug(sli4->os, "ACQE FCoE FIP type=%02x count=%d tag=%#x\n", 8319 fcoe->event_type, 8320 fcoe->fcf_count, 8321 fcoe->event_tag); 8322 8323 if (!sli4->fip) { 8324 return 0; 8325 } 8326 8327 event.type = fcoe->event_type; 8328 event.index = UINT32_MAX; 8329 8330 switch (fcoe->event_type) { 8331 case SLI4_FCOE_FIP_FCF_DISCOVERED: 8332 ocs_log_debug(sli4->os, "FCF Discovered index=%d\n", fcoe->event_information); 8333 break; 8334 case SLI4_FCOE_FIP_FCF_TABLE_FULL: 8335 ocs_log_debug(sli4->os, "FCF Table Full\n"); 8336 mask = 0; 8337 break; 8338 case SLI4_FCOE_FIP_FCF_DEAD: 8339 ocs_log_debug(sli4->os, "FCF Dead/Gone index=%d\n", fcoe->event_information); 8340 break; 8341 case SLI4_FCOE_FIP_FCF_CLEAR_VLINK: 8342 mask = UINT16_MAX; 8343 ocs_log_debug(sli4->os, "Clear VLINK Received VPI=%#x\n", fcoe->event_information & mask); 8344 break; 8345 case SLI4_FCOE_FIP_FCF_MODIFIED: 8346 ocs_log_debug(sli4->os, "FCF Modified\n"); 8347 break; 8348 default: 8349 ocs_log_test(sli4->os, "bad FCoE type %#x", fcoe->event_type); 8350 mask = 0; 8351 } 8352 8353 if (mask != 0) { 8354 event.index = fcoe->event_information & mask; 8355 } 8356 8357 sli4->fip(sli4->fip_arg, &event); 8358 8359 return 0; 8360} 8361 8362/** 8363 * @ingroup sli_fc 8364 * @brief Allocate a receive queue. 8365 * 8366 * @par Description 8367 * Allocates DMA memory and configures the requested queue type. 8368 * 8369 * @param sli4 SLI context. 8370 * @param q Pointer to the queue object for the header. 8371 * @param n_entries Number of entries to allocate. 8372 * @param buffer_size buffer size for the queue. 8373 * @param cq Associated CQ. 8374 * @param ulp The ULP to bind 8375 * @param is_hdr Used to validate the rq_id and set the type of queue 8376 * 8377 * @return Returns 0 on success, or -1 on failure. 8378 */ 8379int32_t 8380sli_fc_rq_alloc(sli4_t *sli4, sli4_queue_t *q, 8381 uint32_t n_entries, uint32_t buffer_size, 8382 sli4_queue_t *cq, uint16_t ulp, uint8_t is_hdr) 8383{ 8384 int32_t (*rq_create)(sli4_t *, void *, size_t, ocs_dma_t *, uint16_t, uint16_t, uint16_t); 8385 8386 if ((sli4 == NULL) || (q == NULL)) { 8387 void *os = sli4 != NULL ? sli4->os : NULL; 8388 8389 ocs_log_err(os, "bad parameter sli4=%p q=%p\n", sli4, q); 8390 return -1; 8391 } 8392 8393 if (__sli_queue_init(sli4, q, SLI_QTYPE_RQ, SLI4_FCOE_RQE_SIZE, 8394 n_entries, SLI_PAGE_SIZE)) { 8395 return -1; 8396 } 8397 8398 if (sli4->if_type == SLI4_IF_TYPE_BE3_SKH_PF) { 8399 rq_create = sli_cmd_fcoe_rq_create; 8400 } else { 8401 rq_create = sli_cmd_fcoe_rq_create_v1; 8402 } 8403 8404 if (rq_create(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, &q->dma, 8405 cq->id, ulp, buffer_size)) { 8406 if (__sli_create_queue(sli4, q)) { 8407 ocs_dma_free(sli4->os, &q->dma); 8408 return -1; 8409 } 8410 if (is_hdr && q->id & 1) { 8411 ocs_log_test(sli4->os, "bad header RQ_ID %d\n", q->id); 8412 ocs_dma_free(sli4->os, &q->dma); 8413 return -1; 8414 } else if (!is_hdr && (q->id & 1) == 0) { 8415 ocs_log_test(sli4->os, "bad data RQ_ID %d\n", q->id); 8416 ocs_dma_free(sli4->os, &q->dma); 8417 return -1; 8418 } 8419 } else { 8420 return -1; 8421 } 8422 q->u.flag.is_hdr = is_hdr; 8423 if (SLI4_IF_TYPE_BE3_SKH_PF == sli4->if_type) { 8424 q->u.flag.rq_batch = TRUE; 8425 } 8426 return 0; 8427} 8428 8429/** 8430 * @ingroup sli_fc 8431 * @brief Allocate a receive queue set. 8432 * 8433 * @param sli4 SLI context. 8434 * @param num_rq_pairs to create 8435 * @param qs Pointers to the queue objects for both header and data. 8436 * Length of this arrays should be 2 * num_rq_pairs 8437 * @param base_cq_id. Assumes base_cq_id : (base_cq_id + num_rq_pairs) cqs as allotted. 8438 * @param n_entries number of entries in each RQ queue. 8439 * @param header_buffer_size 8440 * @param payload_buffer_size 8441 * @param ulp The ULP to bind 8442 * 8443 * @return Returns 0 on success, or -1 on failure. 8444 */ 8445int32_t 8446sli_fc_rq_set_alloc(sli4_t *sli4, uint32_t num_rq_pairs, 8447 sli4_queue_t *qs[], uint32_t base_cq_id, 8448 uint32_t n_entries, uint32_t header_buffer_size, 8449 uint32_t payload_buffer_size, uint16_t ulp) 8450{ 8451 uint32_t i, p, offset = 0; 8452 uint32_t payload_size, total_page_count = 0; 8453 uintptr_t addr; 8454 ocs_dma_t dma; 8455 sli4_res_common_create_queue_set_t *rsp = NULL; 8456 sli4_req_fcoe_rq_create_v2_t *req = NULL; 8457 8458 ocs_memset(&dma, 0, sizeof(dma)); 8459 8460 for (i = 0; i < (num_rq_pairs * 2); i++) { 8461 if (__sli_queue_init(sli4, qs[i], SLI_QTYPE_RQ, SLI4_FCOE_RQE_SIZE, 8462 n_entries, SLI_PAGE_SIZE)) { 8463 goto error; 8464 } 8465 } 8466 8467 total_page_count = sli_page_count(qs[0]->dma.size, SLI_PAGE_SIZE) * num_rq_pairs * 2; 8468 8469 /* Payload length must accommodate both request and response */ 8470 payload_size = max((sizeof(sli4_req_fcoe_rq_create_v1_t) + (8 * total_page_count)), 8471 sizeof(sli4_res_common_create_queue_set_t)); 8472 8473 if (ocs_dma_alloc(sli4->os, &dma, payload_size, SLI_PAGE_SIZE)) { 8474 ocs_log_err(sli4->os, "DMA allocation failed\n"); 8475 goto error; 8476 } 8477 ocs_memset(dma.virt, 0, payload_size); 8478 8479 if (sli_cmd_sli_config(sli4, sli4->bmbx.virt, SLI4_BMBX_SIZE, 8480 payload_size, &dma) == -1) { 8481 goto error; 8482 } 8483 req = (sli4_req_fcoe_rq_create_v2_t *)((uint8_t *)dma.virt); 8484 8485 /* Fill Header fields */ 8486 req->hdr.opcode = SLI4_OPC_FCOE_RQ_CREATE; 8487 req->hdr.subsystem = SLI4_SUBSYSTEM_FCFCOE; 8488 req->hdr.version = 2; 8489 req->hdr.request_length = sizeof(sli4_req_fcoe_rq_create_v2_t) - sizeof(sli4_req_hdr_t) 8490 + (8 * total_page_count); 8491 8492 /* Fill Payload fields */ 8493 req->dnb = TRUE; 8494 req->num_pages = sli_page_count(qs[0]->dma.size, SLI_PAGE_SIZE); 8495 req->rqe_count = qs[0]->dma.size / SLI4_FCOE_RQE_SIZE; 8496 req->rqe_size = SLI4_FCOE_RQE_SIZE_8; 8497 req->page_size = SLI4_FCOE_RQ_PAGE_SIZE_4096; 8498 req->rq_count = num_rq_pairs * 2; 8499 req->base_cq_id = base_cq_id; 8500 req->hdr_buffer_size = header_buffer_size; 8501 req->payload_buffer_size = payload_buffer_size; 8502 8503 for (i = 0; i < (num_rq_pairs * 2); i++) { 8504 for (p = 0, addr = qs[i]->dma.phys; p < req->num_pages; p++, addr += SLI_PAGE_SIZE) { 8505 req->page_physical_address[offset].low = ocs_addr32_lo(addr); 8506 req->page_physical_address[offset].high = ocs_addr32_hi(addr); 8507 offset++; 8508 } 8509 } 8510 8511 if (sli_bmbx_command(sli4)){ 8512 ocs_log_crit(sli4->os, "bootstrap mailbox write faild RQSet\n"); 8513 goto error; 8514 } 8515 8516 rsp = (void *)((uint8_t *)dma.virt); 8517 if (rsp->hdr.status) { 8518 ocs_log_err(sli4->os, "bad create RQSet status=%#x addl=%#x\n", 8519 rsp->hdr.status, rsp->hdr.additional_status); 8520 goto error; 8521 } else { 8522 for (i = 0; i < (num_rq_pairs * 2); i++) { 8523 qs[i]->id = i + rsp->q_id; 8524 if ((qs[i]->id & 1) == 0) { 8525 qs[i]->u.flag.is_hdr = TRUE; 8526 } else { 8527 qs[i]->u.flag.is_hdr = FALSE; 8528 } 8529 qs[i]->doorbell_offset = regmap[SLI4_REG_FCOE_RQ_DOORBELL][sli4->if_type].off; 8530 qs[i]->doorbell_rset = regmap[SLI4_REG_FCOE_RQ_DOORBELL][sli4->if_type].rset; 8531 } 8532 } 8533 8534 ocs_dma_free(sli4->os, &dma); 8535 8536 return 0; 8537 8538error: 8539 for (i = 0; i < (num_rq_pairs * 2); i++) { 8540 if (qs[i]->dma.size) { 8541 ocs_dma_free(sli4->os, &qs[i]->dma); 8542 } 8543 } 8544 8545 if (dma.size) { 8546 ocs_dma_free(sli4->os, &dma); 8547 } 8548 8549 return -1; 8550} 8551 8552/** 8553 * @ingroup sli_fc 8554 * @brief Get the RPI resource requirements. 8555 * 8556 * @param sli4 SLI context. 8557 * @param n_rpi Number of RPIs desired. 8558 * 8559 * @return Returns the number of bytes needed. This value may be zero. 8560 */ 8561uint32_t 8562sli_fc_get_rpi_requirements(sli4_t *sli4, uint32_t n_rpi) 8563{ 8564 uint32_t bytes = 0; 8565 8566 /* Check if header templates needed */ 8567 if (sli4->config.hdr_template_req) { 8568 /* round up to a page */ 8569 bytes = SLI_ROUND_PAGE(n_rpi * SLI4_FCOE_HDR_TEMPLATE_SIZE); 8570 } 8571 8572 return bytes; 8573} 8574 8575/** 8576 * @ingroup sli_fc 8577 * @brief Return a text string corresponding to a CQE status value 8578 * 8579 * @param status Status value 8580 * 8581 * @return Returns corresponding string, otherwise "unknown" 8582 */ 8583const char * 8584sli_fc_get_status_string(uint32_t status) 8585{ 8586 static struct { 8587 uint32_t code; 8588 const char *label; 8589 } lookup[] = { 8590 {SLI4_FC_WCQE_STATUS_SUCCESS, "SUCCESS"}, 8591 {SLI4_FC_WCQE_STATUS_FCP_RSP_FAILURE, "FCP_RSP_FAILURE"}, 8592 {SLI4_FC_WCQE_STATUS_REMOTE_STOP, "REMOTE_STOP"}, 8593 {SLI4_FC_WCQE_STATUS_LOCAL_REJECT, "LOCAL_REJECT"}, 8594 {SLI4_FC_WCQE_STATUS_NPORT_RJT, "NPORT_RJT"}, 8595 {SLI4_FC_WCQE_STATUS_FABRIC_RJT, "FABRIC_RJT"}, 8596 {SLI4_FC_WCQE_STATUS_NPORT_BSY, "NPORT_BSY"}, 8597 {SLI4_FC_WCQE_STATUS_FABRIC_BSY, "FABRIC_BSY"}, 8598 {SLI4_FC_WCQE_STATUS_LS_RJT, "LS_RJT"}, 8599 {SLI4_FC_WCQE_STATUS_CMD_REJECT, "CMD_REJECT"}, 8600 {SLI4_FC_WCQE_STATUS_FCP_TGT_LENCHECK, "FCP_TGT_LENCHECK"}, 8601 {SLI4_FC_WCQE_STATUS_RQ_BUF_LEN_EXCEEDED, "BUF_LEN_EXCEEDED"}, 8602 {SLI4_FC_WCQE_STATUS_RQ_INSUFF_BUF_NEEDED, "RQ_INSUFF_BUF_NEEDED"}, 8603 {SLI4_FC_WCQE_STATUS_RQ_INSUFF_FRM_DISC, "RQ_INSUFF_FRM_DESC"}, 8604 {SLI4_FC_WCQE_STATUS_RQ_DMA_FAILURE, "RQ_DMA_FAILURE"}, 8605 {SLI4_FC_WCQE_STATUS_FCP_RSP_TRUNCATE, "FCP_RSP_TRUNCATE"}, 8606 {SLI4_FC_WCQE_STATUS_DI_ERROR, "DI_ERROR"}, 8607 {SLI4_FC_WCQE_STATUS_BA_RJT, "BA_RJT"}, 8608 {SLI4_FC_WCQE_STATUS_RQ_INSUFF_XRI_NEEDED, "RQ_INSUFF_XRI_NEEDED"}, 8609 {SLI4_FC_WCQE_STATUS_RQ_INSUFF_XRI_DISC, "INSUFF_XRI_DISC"}, 8610 {SLI4_FC_WCQE_STATUS_RX_ERROR_DETECT, "RX_ERROR_DETECT"}, 8611 {SLI4_FC_WCQE_STATUS_RX_ABORT_REQUEST, "RX_ABORT_REQUEST"}, 8612 }; 8613 uint32_t i; 8614 8615 for (i = 0; i < ARRAY_SIZE(lookup); i++) { 8616 if (status == lookup[i].code) { 8617 return lookup[i].label; 8618 } 8619 } 8620 return "unknown"; 8621} 8622