1/*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright 2000, 2001, 2002, 2003 5 * Broadcom Corporation. All rights reserved. 6 * 7 * This software is furnished under license and may be used and 8 * copied only in accordance with the following terms and 9 * conditions. Subject to these conditions, you may download, 10 * copy, install, use, modify and distribute modified or unmodified 11 * copies of this software in source and/or binary form. No title 12 * or ownership is transferred hereby. 13 * 14 * 1) Any source code used, modified or distributed must reproduce and 15 * retain this copyright notice and list of conditions as they appear in 16 * the source file. 17 * 18 * 2) No right is granted to use any trade name, trademark, or logo of 19 * Broadcom Corporation. The "Broadcom Corporation" name may not be 20 * used to endorse or promote products derived from this software 21 * without the prior written permission of Broadcom Corporation. 22 * 23 * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED 24 * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF 25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR 26 * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE 27 * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE 28 * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 31 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 32 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 33 * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 34 * 35 * $FreeBSD$ 36 */ 37 38/* ********************************************************************* 39 * Broadcom Common Firmware Environment (CFE) 40 * 41 * IOCTL definitions File: cfe_ioctl.h 42 * 43 * IOCTL function numbers and I/O data structures. 44 * 45 * Author: Mitch Lichtenberg 46 * 47 ********************************************************************* */ 48 49/* ********************************************************************* 50 * NVFAM and FLASH stuff 51 ********************************************************************* */ 52 53#define IOCTL_NVRAM_GETINFO 1 /* return nvram_info_t */ 54#define IOCTL_NVRAM_ERASE 2 /* erase sector containing nvram_info_t area */ 55#define IOCTL_FLASH_ERASE_SECTOR 3 /* erase an arbitrary sector */ 56#define IOCTL_FLASH_ERASE_ALL 4 /* Erase the entire flash */ 57#define IOCTL_FLASH_WRITE_ALL 5 /* write entire flash */ 58#define IOCTL_FLASH_GETINFO 6 /* get flash device info */ 59#define IOCTL_FLASH_GETSECTORS 7 /* get sector information */ 60#define IOCTL_FLASH_ERASE_RANGE 8 /* erase range of bytes */ 61#define IOCTL_NVRAM_UNLOCK 9 /* allow r/w beyond logical end of device */ 62#define IOCTL_FLASH_PROTECT_RANGE 10 /* Protect a group of sectors */ 63#define IOCTL_FLASH_UNPROTECT_RANGE 11 /* unprotect a group of sectors */ 64#define IOCTL_FLASH_DATA_WIDTH_MODE 12 /* switch flash and gen bus to support 8 or 16-bit mode I/Os */ 65#define IOCTL_FLASH_BURST_MODE 13 /* configure gen bus for burst mode */ 66 67typedef struct flash_range_s { 68 unsigned int range_base; 69 unsigned int range_length; 70} flash_range_t; 71 72typedef struct flash_info_s { 73 unsigned long long flash_base; /* flash physical base address */ 74 unsigned int flash_size; /* available device size in bytes */ 75 unsigned int flash_type; /* type, from FLASH_TYPE below */ 76 unsigned int flash_flags; /* Various flags (FLASH_FLAG_xxx) */ 77} flash_info_t; 78 79typedef struct flash_sector_s { 80 int flash_sector_idx; 81 int flash_sector_status; 82 unsigned int flash_sector_offset; 83 unsigned int flash_sector_size; 84} flash_sector_t; 85 86#define FLASH_SECTOR_OK 0 87#define FLASH_SECTOR_INVALID -1 88 89#define FLASH_TYPE_UNKNOWN 0 /* not sure what kind of flash */ 90#define FLASH_TYPE_SRAM 1 /* not flash: it's SRAM */ 91#define FLASH_TYPE_ROM 2 /* not flash: it's ROM */ 92#define FLASH_TYPE_FLASH 3 /* it's flash memory of some sort */ 93 94#define FLASH_FLAG_NOERASE 1 /* Byte-range writes supported, 95 Erasing is not necessary */ 96 97typedef struct nvram_info_s { 98 int nvram_offset; /* offset of environment area */ 99 int nvram_size; /* size of environment area */ 100 int nvram_eraseflg; /* true if we need to erase first */ 101} nvram_info_t; 102 103/* ********************************************************************* 104 * Ethernet stuff 105 ********************************************************************* */ 106 107#define IOCTL_ETHER_GETHWADDR 1 /* Get hardware address (6bytes) */ 108#define IOCTL_ETHER_SETHWADDR 2 /* Set hardware address (6bytes) */ 109#define IOCTL_ETHER_GETSPEED 3 /* Get Speed and Media (int) */ 110#define IOCTL_ETHER_SETSPEED 4 /* Set Speed and Media (int) */ 111#define IOCTL_ETHER_GETLINK 5 /* get link status (int) */ 112#define IOCTL_ETHER_GETLOOPBACK 7 /* get loopback state */ 113#define IOCTL_ETHER_SETLOOPBACK 8 /* set loopback state */ 114#define IOCTL_ETHER_SETPACKETFIFO 9 /* set packet fifo mode (int) */ 115#define IOCTL_ETHER_SETSTROBESIG 10 /* set strobe signal (int) */ 116 117#define ETHER_LOOPBACK_OFF 0 /* no loopback */ 118#define ETHER_LOOPBACK_INT 1 /* Internal loopback */ 119#define ETHER_LOOPBACK_EXT 2 /* External loopback (through PHY) */ 120 121#define ETHER_SPEED_AUTO 0 /* Auto detect */ 122#define ETHER_SPEED_UNKNOWN 0 /* Speed not known (on link status) */ 123#define ETHER_SPEED_10HDX 1 /* 10MB hdx and fdx */ 124#define ETHER_SPEED_10FDX 2 125#define ETHER_SPEED_100HDX 3 /* 100MB hdx and fdx */ 126#define ETHER_SPEED_100FDX 4 127#define ETHER_SPEED_1000HDX 5 /* 1000MB hdx and fdx */ 128#define ETHER_SPEED_1000FDX 6 129 130#define ETHER_FIFO_8 0 /* 8-bit packet fifo mode */ 131#define ETHER_FIFO_16 1 /* 16-bit packet fifo mode */ 132#define ETHER_ETHER 2 /* Standard ethernet mode */ 133 134#define ETHER_STROBE_GMII 0 /* GMII style strobe signal */ 135#define ETHER_STROBE_ENCODED 1 /* Encoded */ 136#define ETHER_STROBE_SOP 2 /* SOP flagged. Only in 8-bit mode*/ 137#define ETHER_STROBE_EOP 3 /* EOP flagged. Only in 8-bit mode*/ 138 139/* ********************************************************************* 140 * Serial Ports 141 ********************************************************************* */ 142 143#define IOCTL_SERIAL_SETSPEED 1 /* get baud rate (int) */ 144#define IOCTL_SERIAL_GETSPEED 2 /* set baud rate (int) */ 145#define IOCTL_SERIAL_SETFLOW 3 /* Set Flow Control */ 146#define IOCTL_SERIAL_GETFLOW 4 /* Get Flow Control */ 147 148#define SERIAL_FLOW_NONE 0 /* no flow control */ 149#define SERIAL_FLOW_SOFTWARE 1 /* software flow control (not impl) */ 150#define SERIAL_FLOW_HARDWARE 2 /* hardware flow control */ 151 152/* ********************************************************************* 153 * Block device stuff 154 ********************************************************************* */ 155 156#define IOCTL_BLOCK_GETBLOCKSIZE 1 /* get block size (int) */ 157#define IOCTL_BLOCK_GETTOTALBLOCKS 2 /* get total bocks (long long) */ 158#define IOCTL_BLOCK_GETDEVTYPE 3 /* get device type (struct) */ 159 160typedef struct blockdev_info_s { 161 unsigned long long blkdev_totalblocks; 162 unsigned int blkdev_blocksize; 163 unsigned int blkdev_devtype; 164} blockdev_info_t; 165 166#define BLOCK_DEVTYPE_DISK 0 167#define BLOCK_DEVTYPE_CDROM 1 168