1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright 2011 Freescale Semiconductor, Inc. 4// Copyright 2011 Linaro Ltd. 5 6#include "imx53.dtsi" 7 8/ { 9 chosen { 10 stdout-path = &uart1; 11 }; 12 13 memory@70000000 { 14 device_type = "memory"; 15 reg = <0x70000000 0x20000000>, 16 <0xb0000000 0x20000000>; 17 }; 18 19 display0: disp0 { 20 compatible = "fsl,imx-parallel-display"; 21 pinctrl-names = "default"; 22 pinctrl-0 = <&pinctrl_ipu_disp0>; 23 24 #address-cells = <1>; 25 #size-cells = <0>; 26 status = "disabled"; 27 28 port@0 { 29 reg = <0>; 30 31 display0_in: endpoint { 32 remote-endpoint = <&ipu_di0_disp0>; 33 }; 34 }; 35 36 port@1 { 37 reg = <1>; 38 39 display_out: endpoint { 40 remote-endpoint = <&panel_in>; 41 }; 42 }; 43 }; 44 45 gpio-keys { 46 compatible = "gpio-keys"; 47 48 power { 49 label = "Power Button"; 50 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; 51 linux,code = <KEY_POWER>; 52 }; 53 54 volume-up { 55 label = "Volume Up"; 56 gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; 57 linux,code = <KEY_VOLUMEUP>; 58 wakeup-source; 59 }; 60 61 volume-down { 62 label = "Volume Down"; 63 gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; 64 linux,code = <KEY_VOLUMEDOWN>; 65 wakeup-source; 66 }; 67 }; 68 69 leds { 70 compatible = "gpio-leds"; 71 pinctrl-names = "default"; 72 pinctrl-0 = <&led_pin_gpio7_7>; 73 74 user { 75 label = "Heartbeat"; 76 gpios = <&gpio7 7 0>; 77 linux,default-trigger = "heartbeat"; 78 }; 79 }; 80 81 panel { 82 compatible = "sii,43wvf1g"; 83 84 port { 85 panel_in: endpoint { 86 remote-endpoint = <&display_out>; 87 }; 88 }; 89 }; 90 91 regulators { 92 compatible = "simple-bus"; 93 #address-cells = <1>; 94 #size-cells = <0>; 95 96 reg_3p2v: regulator@0 { 97 compatible = "regulator-fixed"; 98 reg = <0>; 99 regulator-name = "3P2V"; 100 regulator-min-microvolt = <3200000>; 101 regulator-max-microvolt = <3200000>; 102 regulator-always-on; 103 }; 104 105 reg_usb_vbus: regulator@1 { 106 compatible = "regulator-fixed"; 107 reg = <1>; 108 regulator-name = "usb_vbus"; 109 regulator-min-microvolt = <5000000>; 110 regulator-max-microvolt = <5000000>; 111 gpio = <&gpio7 8 0>; 112 enable-active-high; 113 }; 114 }; 115 116 sound { 117 compatible = "fsl,imx53-qsb-sgtl5000", 118 "fsl,imx-audio-sgtl5000"; 119 model = "imx53-qsb-sgtl5000"; 120 ssi-controller = <&ssi2>; 121 audio-codec = <&sgtl5000>; 122 audio-routing = 123 "MIC_IN", "Mic Jack", 124 "Mic Jack", "Mic Bias", 125 "Headphone Jack", "HP_OUT"; 126 mux-int-port = <2>; 127 mux-ext-port = <5>; 128 }; 129}; 130 131&cpu0 { 132 /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ 133 operating-points = < 134 /* kHz uV */ 135 166666 850000 136 400000 900000 137 800000 1050000 138 1000000 1200000 139 >; 140}; 141 142&esdhc1 { 143 pinctrl-names = "default"; 144 pinctrl-0 = <&pinctrl_esdhc1>; 145 status = "okay"; 146}; 147 148&ipu_di0_disp0 { 149 remote-endpoint = <&display0_in>; 150}; 151 152&ssi2 { 153 status = "okay"; 154}; 155 156&esdhc3 { 157 pinctrl-names = "default"; 158 pinctrl-0 = <&pinctrl_esdhc3>; 159 cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; 160 wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; 161 bus-width = <8>; 162 status = "okay"; 163}; 164 165&iomuxc { 166 pinctrl-names = "default"; 167 pinctrl-0 = <&pinctrl_hog>; 168 169 imx53-qsb { 170 pinctrl_hog: hoggrp { 171 fsl,pins = < 172 MX53_PAD_GPIO_8__GPIO1_8 0x80000000 173 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 174 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 175 MX53_PAD_EIM_DA11__GPIO3_11 0x80000000 176 MX53_PAD_EIM_DA12__GPIO3_12 0x80000000 177 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 178 MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 179 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 180 >; 181 }; 182 183 led_pin_gpio7_7: led_gpio7_7 { 184 fsl,pins = < 185 MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 186 >; 187 }; 188 189 pinctrl_audmux: audmuxgrp { 190 fsl,pins = < 191 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 192 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 193 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 194 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 195 >; 196 }; 197 198 pinctrl_codec: codecgrp { 199 fsl,pins = < 200 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 201 >; 202 }; 203 204 pinctrl_esdhc1: esdhc1grp { 205 fsl,pins = < 206 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 207 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 208 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 209 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 210 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 211 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 212 >; 213 }; 214 215 pinctrl_esdhc3: esdhc3grp { 216 fsl,pins = < 217 MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 218 MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 219 MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 220 MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 221 MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 222 MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 223 MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 224 MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 225 MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 226 MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 227 >; 228 }; 229 230 pinctrl_fec: fecgrp { 231 fsl,pins = < 232 MX53_PAD_FEC_MDC__FEC_MDC 0x4 233 MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc 234 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 235 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 236 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 237 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 238 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 239 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 240 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 241 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 242 >; 243 }; 244 245 /* open drain */ 246 pinctrl_i2c1: i2c1grp { 247 fsl,pins = < 248 MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec 249 MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec 250 >; 251 }; 252 253 pinctrl_i2c2: i2c2grp { 254 fsl,pins = < 255 MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 256 MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 257 >; 258 }; 259 260 pinctrl_ipu_disp0: ipudisp0grp { 261 fsl,pins = < 262 MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 263 MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 264 MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 265 MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 266 MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 267 MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 268 MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 269 MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 270 MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 271 MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 272 MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 273 MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 274 MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 275 MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 276 MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 277 MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 278 MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 279 MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 280 MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 281 MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 282 MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 283 MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 284 MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 285 MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 286 MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 287 MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 288 MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 289 MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 290 >; 291 }; 292 293 pinctrl_vga_sync: vgasync-grp { 294 fsl,pins = < 295 /* VGA_HSYNC, VSYNC with max drive strength */ 296 MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6 297 MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6 298 >; 299 }; 300 301 pinctrl_uart1: uart1grp { 302 fsl,pins = < 303 MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 304 MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4 305 >; 306 }; 307 }; 308}; 309 310&tve { 311 pinctrl-names = "default"; 312 pinctrl-0 = <&pinctrl_vga_sync>; 313 ddc-i2c-bus = <&i2c2>; 314 fsl,tve-mode = "vga"; 315 fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */ 316 fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */ 317 status = "okay"; 318}; 319 320&uart1 { 321 pinctrl-names = "default"; 322 pinctrl-0 = <&pinctrl_uart1>; 323 status = "okay"; 324}; 325 326&i2c2 { 327 pinctrl-names = "default"; 328 pinctrl-0 = <&pinctrl_i2c2>; 329 status = "okay"; 330 331 sgtl5000: codec@a { 332 compatible = "fsl,sgtl5000"; 333 reg = <0x0a>; 334 pinctrl-names = "default"; 335 pinctrl-0 = <&pinctrl_codec>; 336 #sound-dai-cells = <0>; 337 VDDA-supply = <®_3p2v>; 338 VDDIO-supply = <®_3p2v>; 339 clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; 340 }; 341}; 342 343&i2c1 { 344 pinctrl-names = "default"; 345 pinctrl-0 = <&pinctrl_i2c1>; 346 status = "okay"; 347 348 accelerometer: mma8450@1c { 349 compatible = "fsl,mma8450"; 350 reg = <0x1c>; 351 }; 352}; 353 354&audmux { 355 pinctrl-names = "default"; 356 pinctrl-0 = <&pinctrl_audmux>; 357 status = "okay"; 358}; 359 360&fec { 361 pinctrl-names = "default"; 362 pinctrl-0 = <&pinctrl_fec>; 363 phy-mode = "rmii"; 364 phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; 365 status = "okay"; 366}; 367 368&sata { 369 status = "okay"; 370}; 371 372&vpu { 373 status = "okay"; 374}; 375 376&usbh1 { 377 vbus-supply = <®_usb_vbus>; 378 phy_type = "utmi"; 379 status = "okay"; 380}; 381 382&usbotg { 383 dr_mode = "peripheral"; 384 status = "okay"; 385}; 386