1/* 2 * Copyright 2014 General Electric Company 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively, 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use, 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42/dts-v1/; 43 44#include "imx53.dtsi" 45#include <dt-bindings/input/input.h> 46 47/ { 48 model = "General Electric CS ONE"; 49 compatible = "ge,imx53-cpuvo", "fsl,imx53"; 50 51 aliases { 52 spi0 = &cspi; 53 spi1 = &ecspi1; 54 spi2 = &ecspi2; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 memory@70000000 { 62 device_type = "memory"; 63 reg = <0x70000000 0x20000000>, 64 <0xb0000000 0x20000000>; 65 }; 66 67 cko2_11M: sgtl-clock-cko2 { 68 compatible = "fixed-clock"; 69 #clock-cells = <0>; 70 clock-frequency = <11289600>; 71 }; 72 73 sgtlsound: sound { 74 compatible = "fsl,imx53-cpuvo-sgtl5000", 75 "fsl,imx-audio-sgtl5000"; 76 model = "imx53-cpuvo-sgtl5000"; 77 ssi-controller = <&ssi2>; 78 audio-codec = <&sgtl5000>; 79 audio-routing = 80 "MIC_IN", "Mic Jack", 81 "Mic Jack", "Mic Bias", 82 "Headphone Jack", "HP_OUT"; 83 mux-int-port = <2>; 84 mux-ext-port = <6>; 85 }; 86 87 reg_sgtl5k: regulator-sgtl5k { 88 compatible = "regulator-fixed"; 89 regulator-name = "regulator-sgtl5k"; 90 regulator-min-microvolt = <3300000>; 91 regulator-max-microvolt = <3300000>; 92 regulator-always-on; 93 }; 94 95 reg_usb_otg_vbus: regulator-usb-otg-vbus { 96 compatible = "regulator-fixed"; 97 regulator-name = "usbotg_vbus"; 98 regulator-min-microvolt = <5000000>; 99 regulator-max-microvolt = <5000000>; 100 pinctrl-0 = <&pinctrl_usb_otg_vbus>; 101 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; 102 enable-active-high; 103 }; 104 105 reg_usb_vbus: regulator-usb-vbus { 106 compatible = "regulator-fixed"; 107 regulator-name = "usbh1_vbus"; 108 regulator-min-microvolt = <5000000>; 109 regulator-max-microvolt = <5000000>; 110 regulator-always-on; 111 }; 112 113 reg_usbh2_vbus: regulator-usbh2-vbus { 114 compatible = "regulator-fixed"; 115 regulator-name = "usbh2_vbus"; 116 regulator-min-microvolt = <5000000>; 117 regulator-max-microvolt = <5000000>; 118 pinctrl-names = "default"; 119 pinctrl-0 = <&pinctrl_usbh2_vbus>; 120 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; 121 enable-active-high; 122 }; 123 124 reg_usbh3_vbus: regulator-usbh3-vbus { 125 compatible = "regulator-fixed"; 126 regulator-name = "usbh3_vbus"; 127 regulator-min-microvolt = <5000000>; 128 regulator-max-microvolt = <5000000>; 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_usbh3_vbus>; 131 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; 132 enable-active-high; 133 }; 134 135 reg_tsiref: regulator-tsiref { 136 compatible = "regulator-fixed"; 137 regulator-name = "tsiref"; 138 regulator-min-microvolt = <2500000>; 139 regulator-max-microvolt = <2500000>; 140 regulator-always-on; 141 }; 142 143 reg_3v3: regulator-3v3 { 144 /* TPS54320 */ 145 compatible = "regulator-fixed"; 146 regulator-name = "3V3"; 147 regulator-min-microvolt = <3300000>; 148 regulator-max-microvolt = <3300000>; 149 regulator-always-on; 150 }; 151 152 reg_3v3_lcd: regulator-3v3-lcd { 153 /* MIC2009 */ 154 compatible = "regulator-fixed"; 155 regulator-name = "LCD_3V3"; 156 vin-supply = <®_3v3>; 157 regulator-min-microvolt = <3300000>; 158 regulator-max-microvolt = <3300000>; 159 regulator-always-on; 160 }; 161 162 pwm_bl: backlight { 163 compatible = "pwm-backlight"; 164 pwms = <&pwm2 0 50000>; 165 brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35 166 38 40 43 45 48 51 53 56 58 61 63 66 68 71 167 73 76 79 81 84 86 89 91 94 96 99 102 104 168 107 109 112 114 117 119 122 124 127 130 169 132 135 137 140 142 145 147 150 153 155 170 158 160 163 165 168 170 173 175 178 181 171 183 186 188 191 193 196 198 201 204 206 172 209 211 214 216 219 221 224 226 229 232 173 234 237 239 242 244 247 249 252 255>; 174 default-brightness-level = <0>; 175 enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; 176 power-supply = <®_3v3_lcd>; 177 }; 178 179 leds-brightness { 180 compatible = "pwm-leds"; 181 182 alarm-brightness { 183 pwms = <&pwm1 0 100000>; 184 max-brightness = <255>; 185 }; 186 }; 187 188 leds { 189 compatible = "gpio-leds"; 190 pinctrl-names = "default"; 191 pinctrl-0 = <&pinctrl_alarmled_pins>; 192 193 alarm1 { 194 label = "alarm:red"; 195 gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; 196 }; 197 198 alarm2 { 199 label = "alarm:yellow"; 200 gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; 201 }; 202 203 alarm3 { 204 label = "alarm:blue"; 205 gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; 206 }; 207 208 alarm4 { 209 label = "alarm:silenced"; 210 gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; 211 }; 212 }; 213 214 gpio-poweroff { 215 compatible = "gpio-poweroff"; 216 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; 217 }; 218 219 gpio-restart { 220 compatible = "gpio-restart"; 221 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; 222 active-delay = <100>; 223 inactive-delay = <10>; 224 wait-delay = <100>; 225 }; 226 227 power-gpio-keys { 228 compatible = "gpio-keys"; 229 230 power-button { 231 label = "Power button"; 232 gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; 233 linux,code = <KEY_POWER>; 234 }; 235 }; 236 237 touch-lock-key { 238 compatible = "gpio-keys"; 239 240 touch-lock-button { 241 label = "Touch lock button"; 242 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; 243 linux,code = <KEY_F12>; 244 }; 245 }; 246 247 usbphy2: usbphy-2 { 248 compatible = "usb-nop-xceiv"; 249 vcc-supply = <®_3v3>; 250 reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; 251 clock-names = "main_clk"; 252 clock-frequency = <24000000>; 253 clocks = <&clks IMX5_CLK_CKO2>; 254 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; 255 assigned-clock-parents = <&clks IMX5_CLK_OSC>; 256 }; 257 258 usbphy3: usbphy-3 { 259 compatible = "usb-nop-xceiv"; 260 vcc-supply = <®_3v3>; 261 reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; 262 clock-names = "main_clk"; 263 264 clock-frequency = <24000000>; 265 clocks = <&clks IMX5_CLK_CKO2>; 266 assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; 267 assigned-clock-parents = <&clks IMX5_CLK_OSC>; 268 }; 269 270 panel-lvds0 { 271 compatible = "nvd,9128"; 272 power-supply = <®_3v3_lcd>; 273 274 port { 275 panel_in_lvds0: endpoint { 276 remote-endpoint = <&lvds0_out>; 277 }; 278 }; 279 }; 280}; 281 282&usbphy0 { 283 vcc-supply = <®_3v3>; 284}; 285 286&usbphy1 { 287 vcc-supply = <®_3v3>; 288}; 289 290&audmux { 291 pinctrl-names = "default"; 292 pinctrl-0 = <&pinctrl_audmux>; 293 status = "okay"; 294}; 295 296&cpu0 { 297 /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ 298 operating-points = < 299 /* kHz uV */ 300 166666 850000 301 400000 900000 302 800000 1050000 303 1000000 1200000 304 >; 305}; 306 307&ecspi1 { 308 pinctrl-names = "default"; 309 pinctrl-0 = <&pinctrl_ecspi1>; 310 cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW 311 &gpio4 10 GPIO_ACTIVE_LOW 312 &gpio4 11 GPIO_ACTIVE_LOW 313 &gpio4 12 GPIO_ACTIVE_LOW>; 314 status = "okay"; 315 316 spidev0: spi@0 { 317 compatible = "ge,achc"; 318 reg = <0>; 319 spi-max-frequency = <1000000>; 320 }; 321 322 spidev1: spi@1 { 323 compatible = "ge,achc"; 324 reg = <1>; 325 spi-max-frequency = <1000000>; 326 }; 327 328 gpioxra0: gpio@2 { 329 compatible = "exar,xra1403"; 330 reg = <2>; 331 gpio-controller; 332 #gpio-cells = <2>; 333 spi-max-frequency = <1000000>; 334 }; 335 336 gpioxra1: gpio@3 { 337 compatible = "exar,xra1403"; 338 reg = <3>; 339 gpio-controller; 340 #gpio-cells = <2>; 341 spi-max-frequency = <1000000>; 342 }; 343}; 344 345&ecspi2 { 346 pinctrl-names = "default"; 347 pinctrl-0 = <&pinctrl_ecspi2>; 348 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; 349 status = "okay"; 350 351 da9053@0 { 352 compatible = "dlg,da9053-aa"; 353 reg = <0>; 354 interrupt-parent = <&gpio3>; 355 interrupts = <12 IRQ_TYPE_LEVEL_LOW>; 356 spi-max-frequency = <1000000>; 357 dlg,tsi-as-adc; 358 tsiref-supply = <®_tsiref>; 359 360 regulators { 361 buck1_reg: buck1 { 362 regulator-name = "BUCKCORE"; 363 regulator-min-microvolt = <500000>; 364 regulator-max-microvolt = <2075000>; 365 regulator-always-on; 366 }; 367 368 buck2_reg: buck2 { 369 regulator-name = "BUCKPRO"; 370 regulator-min-microvolt = <500000>; 371 regulator-max-microvolt = <2075000>; 372 regulator-always-on; 373 }; 374 375 buck3_reg: buck3 { 376 regulator-name = "BUCKMEM"; 377 regulator-min-microvolt = <925000>; 378 regulator-max-microvolt = <2500000>; 379 regulator-always-on; 380 }; 381 382 buck4_reg: buck4 { 383 regulator-name = "BUCKPERI"; 384 regulator-min-microvolt = <1800000>; 385 regulator-max-microvolt = <3600000>; 386 regulator-always-on; 387 }; 388 389 ldo1_reg: ldo1 { 390 regulator-name = "ldo1_1v3"; 391 regulator-min-microvolt = <600000>; 392 regulator-max-microvolt = <1800000>; 393 regulator-always-on; 394 }; 395 396 ldo2_reg: ldo2 { 397 regulator-name = "ldo2_1v3"; 398 regulator-min-microvolt = <600000>; 399 regulator-max-microvolt = <1800000>; 400 regulator-always-on; 401 }; 402 403 ldo3_reg: ldo3 { 404 regulator-name = "ldo3_3v3"; 405 regulator-min-microvolt = <1725000>; 406 regulator-max-microvolt = <3300000>; 407 regulator-always-on; 408 }; 409 410 ldo4_reg: ldo4 { 411 regulator-name = "ldo4_2v775"; 412 regulator-min-microvolt = <1725000>; 413 regulator-max-microvolt = <3300000>; 414 regulator-always-on; 415 }; 416 417 ldo5_reg: ldo5 { 418 regulator-name = "ldo5_3v3"; 419 regulator-min-microvolt = <1200000>; 420 regulator-max-microvolt = <3600000>; 421 regulator-always-on; 422 }; 423 424 ldo6_reg: ldo6 { 425 regulator-name = "ldo6_1v3"; 426 regulator-min-microvolt = <1200000>; 427 regulator-max-microvolt = <3600000>; 428 regulator-always-on; 429 }; 430 431 ldo7_reg: ldo7 { 432 regulator-name = "ldo7_2v75"; 433 regulator-min-microvolt = <1200000>; 434 regulator-max-microvolt = <3600000>; 435 regulator-always-on; 436 }; 437 438 ldo8_reg: ldo8 { 439 regulator-name = "ldo8_1v8"; 440 regulator-min-microvolt = <1200000>; 441 regulator-max-microvolt = <3600000>; 442 regulator-always-on; 443 }; 444 445 ldo9_reg: ldo9 { 446 regulator-name = "ldo9_1v5"; 447 regulator-min-microvolt = <1250000>; 448 regulator-max-microvolt = <3650000>; 449 regulator-always-on; 450 }; 451 452 ldo10_reg: ldo10 { 453 regulator-name = "ldo10_1v3"; 454 regulator-min-microvolt = <1200000>; 455 regulator-max-microvolt = <3600000>; 456 regulator-always-on; 457 }; 458 }; 459 }; 460 461}; 462 463&esdhc3 { 464 pinctrl-names = "default"; 465 pinctrl-0 = <&pinctrl_esdhc3>; 466 bus-width = <8>; 467 status = "okay"; 468}; 469 470&fec { 471 pinctrl-names = "default"; 472 pinctrl-0 = <&pinctrl_fec>; 473 phy-supply = <®_3v3>; 474 phy-mode = "rmii"; 475 phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; 476 status = "okay"; 477}; 478 479&i2c1 { 480 pinctrl-names = "default", "gpio"; 481 pinctrl-0 = <&pinctrl_i2c1>; 482 pinctrl-1 = <&pinctrl_i2c1_gpio>; 483 sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; 484 scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 485 status = "okay"; 486 487 i2c-switch@70 { 488 compatible = "nxp,pca9547"; 489 #address-cells = <1>; 490 #size-cells = <0>; 491 reg = <0x70>; 492 reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; 493 494 i2c4: i2c@0 { 495 #address-cells = <1>; 496 #size-cells = <0>; 497 reg = <0>; 498 499 sgtl5000: codec@a { 500 compatible = "fsl,sgtl5000"; 501 reg = <0xa>; 502 #sound-dai-cells = <0>; 503 VDDA-supply = <®_sgtl5k>; 504 VDDIO-supply = <®_sgtl5k>; 505 clocks = <&cko2_11M>; 506 status = "okay"; 507 }; 508 }; 509 510 i2c5: i2c@1 { 511 #address-cells = <1>; 512 #size-cells = <0>; 513 reg = <1>; 514 515 rtc@30 { 516 compatible = "sii,s35390a"; 517 reg = <0x30>; 518 }; 519 520 temp@48 { 521 compatible = "ti,tmp112"; 522 reg = <0x48>; 523 }; 524 525 mma8453q: accelerometer@1c { 526 compatible = "fsl,mma8453"; 527 reg = <0x1c>; 528 interrupt-parent = <&gpio1>; 529 interrupts = <6 IRQ_TYPE_NONE>; 530 interrupt-names = "INT1"; 531 }; 532 533 mpl3115: pressure-sensor@60 { 534 compatible = "fsl,mpl3115"; 535 reg = <0x60>; 536 }; 537 538 eeprom: eeprom@50 { 539 compatible = "atmel,24c08"; 540 reg = <0x50>; 541 }; 542 }; 543 544 i2c6: i2c@2 { 545 #address-cells = <1>; 546 #size-cells = <0>; 547 reg = <2>; 548 }; 549 550 i2c7: i2c@3 { 551 #address-cells = <1>; 552 #size-cells = <0>; 553 reg = <3>; 554 }; 555 556 i2c8: i2c@4 { 557 #address-cells = <1>; 558 #size-cells = <0>; 559 reg = <4>; 560 }; 561 562 i2c9: i2c@5 { 563 #address-cells = <1>; 564 #size-cells = <0>; 565 reg = <5>; 566 }; 567 568 i2c10: i2c@6 { 569 #address-cells = <1>; 570 #size-cells = <0>; 571 reg = <6>; 572 }; 573 574 i2c11: i2c@7 { 575 #address-cells = <1>; 576 #size-cells = <0>; 577 reg = <7>; 578 }; 579 }; 580}; 581 582&i2c2 { 583 pinctrl-names = "default", "gpio"; 584 pinctrl-0 = <&pinctrl_i2c2>; 585 pinctrl-1 = <&pinctrl_i2c2_gpio>; 586 sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; 587 scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; 588 status = "okay"; 589 590 touchscreen@4b { 591 compatible = "atmel,maxtouch"; 592 reset-gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; 593 reg = <0x4b>; 594 interrupt-parent = <&gpio5>; 595 interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 596 }; 597}; 598 599&i2c3 { 600 pinctrl-names = "default", "gpio"; 601 pinctrl-0 = <&pinctrl_i2c3>; 602 pinctrl-1 = <&pinctrl_i2c3_gpio>; 603 sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; 604 scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; 605 status = "okay"; 606}; 607 608&ldb { 609 status = "okay"; 610 611 lvds0: lvds-channel@0 { 612 status = "okay"; 613 614 port@2 { 615 lvds0_out: endpoint { 616 remote-endpoint = <&panel_in_lvds0>; 617 }; 618 }; 619 }; 620}; 621 622&pmu { 623 secure-reg-access; 624}; 625 626&pwm1 { 627 #pwm-cells = <2>; 628 pinctrl-names = "default"; 629 pinctrl-0 = <&pinctrl_pwm1>; 630 status = "okay"; 631}; 632 633&pwm2 { 634 #pwm-cells = <2>; 635 pinctrl-names = "default"; 636 pinctrl-0 = <&pinctrl_pwm2>; 637 status = "okay"; 638}; 639 640&ssi2 { 641 status = "okay"; 642}; 643 644&uart1 { 645 pinctrl-names = "default"; 646 pinctrl-0 = <&pinctrl_uart1>; 647 status = "okay"; 648}; 649 650&uart2 { 651 pinctrl-names = "default"; 652 pinctrl-0 = <&pinctrl_uart2>; 653 status = "okay"; 654}; 655 656&uart3 { 657 pinctrl-names = "default"; 658 pinctrl-0 = <&pinctrl_uart3>; 659 uart-has-rtscts; 660 status = "okay"; 661}; 662 663&uart4 { 664 pinctrl-names = "default"; 665 pinctrl-0 = <&pinctrl_uart4>; 666 status = "okay"; 667}; 668 669&uart5 { 670 pinctrl-names = "default"; 671 pinctrl-0 = <&pinctrl_uart5>; 672 status = "okay"; 673}; 674 675&usbotg { 676 dr_mode = "otg"; 677 phy_type = "utmi"; 678 vbus-supply = <®_usb_otg_vbus>; 679 pinctrl-0 = <&pinctrl_usb_otg>; 680 status = "okay"; 681}; 682 683&usbh1 { 684 vbus-supply = <®_usb_vbus>; 685 phy_type = "utmi"; 686 dr_mode = "host"; 687 status = "okay"; 688}; 689 690&usbh2 { 691 pinctrl-names = "default"; 692 pinctrl-0 = <&pinctrl_usbh2>; 693 phy_type = "ulpi"; 694 dr_mode = "host"; 695 fsl,usbphy = <&usbphy2>; 696 vbus-supply = <®_usbh2_vbus>; 697 status = "okay"; 698}; 699 700&usbh3 { 701 pinctrl-names = "default"; 702 pinctrl-0 = <&pinctrl_usbh3>; 703 phy_type = "ulpi"; 704 dr_mode = "host"; 705 vbus-supply = <®_usbh3_vbus>; 706 fsl,usbphy = <&usbphy3>; 707 status = "okay"; 708}; 709 710&iomuxc { 711 pinctrl-names = "default"; 712 pinctrl-0 = <&pinctrl_hog_rev6>; 713 714 pinctrl_audmux: audmuxgrp { 715 fsl,pins = < 716 MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400 717 MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400 718 MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400 719 MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400 720 MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400 721 MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400 722 MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400 723 MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400 724 >; 725 }; 726 727 pinctrl_ecspi1: ecspi1grp { 728 fsl,pins = < 729 MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400 730 MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400 731 MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400 732 /* ECSPI1_SS0, must treat as GPIO for EzPort */ 733 MX53_PAD_DISP0_DAT23__GPIO5_17 0x400 734 MX53_PAD_KEY_COL2__GPIO4_10 0x0 735 MX53_PAD_KEY_ROW2__GPIO4_11 0x0 736 MX53_PAD_KEY_COL3__GPIO4_12 0x0 737 >; 738 }; 739 740 pinctrl_ecspi2: ecspi2grp { 741 fsl,pins = < 742 MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0 743 MX53_PAD_EIM_OE__ECSPI2_MISO 0x0 744 MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0 745 MX53_PAD_EIM_RW__GPIO2_26 0x0 746 >; 747 }; 748 749 pinctrl_esdhc1: esdhc1grp { 750 fsl,pins = < 751 MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 752 MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 753 MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 754 MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 755 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 756 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 757 >; 758 }; 759 760 pinctrl_esdhc3: esdhc3grp { 761 fsl,pins = < 762 MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 763 MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 764 MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 765 MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 766 MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 767 MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 768 MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 769 MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 770 MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 771 MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 772 >; 773 }; 774 775 pinctrl_fec: fecgrp { 776 fsl,pins = < 777 MX53_PAD_FEC_MDC__FEC_MDC 0x0 778 MX53_PAD_FEC_MDIO__FEC_MDIO 0x0 779 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0 780 MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0 781 MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0 782 MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0 783 MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0 784 MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0 785 MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0 786 MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0 787 >; 788 }; 789 790 pinctrl_hog_rev6: hoggrp { 791 fsl,pins = < 792 /* CKO2 */ 793 MX53_PAD_GPIO_3__CCM_CLKO2 0x4 794 /* DEFIB_SYNC_MARKER_IN_IRQ */ 795 MX53_PAD_GPIO_5__GPIO1_5 0x0 796 /* ACCELEROMETER_DATA_RDY_N */ 797 MX53_PAD_GPIO_6__GPIO1_6 0x0 798 /* TEMPERATURE_ALERT_N */ 799 MX53_PAD_GPIO_7__GPIO1_7 0x0 800 /* BAROMETRIC_PRESSURE_DATA_RDY_N */ 801 MX53_PAD_GPIO_8__GPIO1_8 0x0 802 /* DOCKING_I2C_INTERFACE_IRQ_N */ 803 MX53_PAD_PATA_DATA4__GPIO2_4 0x0 804 /* PWR_OUT_TO_DOCK_FAULT_N */ 805 MX53_PAD_PATA_DATA5__GPIO2_5 0x0 806 /* ENABLE_PWR_TO_DOCK_N */ 807 MX53_PAD_PATA_DATA6__GPIO2_6 0x0 808 /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */ 809 MX53_PAD_PATA_DATA7__GPIO2_7 0x0 810 /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */ 811 MX53_PAD_PATA_DATA12__GPIO2_12 0x0 812 /* DOCK_PRESENT_N */ 813 MX53_PAD_PATA_DATA13__GPIO2_13 0x0 814 /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */ 815 MX53_PAD_PATA_DATA14__GPIO2_14 0x0 816 /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */ 817 MX53_PAD_PATA_DATA15__GPIO2_15 0x0 818 /* RESET_IMX535_ETHERNET_PHY_N */ 819 MX53_PAD_EIM_A22__GPIO2_16 0x0 820 /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */ 821 MX53_PAD_EIM_A21__GPIO2_17 0x0 822 /* RESET_I2C1_BUS_SEGMENT_MUX_N */ 823 MX53_PAD_EIM_A20__GPIO2_18 0x0 824 /* RESET_IMX535_USB_HOST3_PHY_N */ 825 MX53_PAD_EIM_A19__GPIO2_19 0x0 826 /* ESDHC3_EMMC_NAND_RST_N */ 827 MX53_PAD_EIM_A18__GPIO2_20 0x0 828 /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */ 829 MX53_PAD_EIM_A17__GPIO2_21 0x0 830 /* POWER_DOWN_LVDS0_DESERIALIZER_N */ 831 MX53_PAD_EIM_A16__GPIO2_22 0x0 832 /* POWER_DOWN_LVDS1_DESERIALIZER_N */ 833 MX53_PAD_EIM_LBA__GPIO2_27 0x0 834 /* RESET_DP0_TRANSMITTER_N */ 835 MX53_PAD_EIM_EB0__GPIO2_28 0x0 836 /* RESET_DP1_TRANSMITTER_N */ 837 MX53_PAD_EIM_EB1__GPIO2_29 0x0 838 /* ENABLE_SPDIF_AUDIO_TO_DP0 */ 839 MX53_PAD_EIM_DA0__GPIO3_0 0x0 840 /* ENABLE_SPDIF_AUDIO_TO_DP1 */ 841 MX53_PAD_EIM_DA1__GPIO3_1 0x0 842 /* LVDS1_MUX_CTRL */ 843 MX53_PAD_EIM_DA2__GPIO3_2 0x0 844 /* LVDS0_MUX_CTRL */ 845 MX53_PAD_EIM_DA3__GPIO3_3 0x0 846 /* DP1_TRANSMITTER_IRQ */ 847 MX53_PAD_EIM_DA4__GPIO3_4 0x0 848 /* DP0_TRANSMITTER_IRQ */ 849 MX53_PAD_EIM_DA5__GPIO3_5 0x0 850 /* USB_RESET_N */ 851 MX53_PAD_EIM_DA6__GPIO3_6 0x0 852 /* ENABLE_BATTERY_CHARGER */ 853 MX53_PAD_EIM_DA7__GPIO3_7 0x0 854 /* SOFTWARE_CONTROLLED_PWR_CYCLE */ 855 MX53_PAD_EIM_DA8__GPIO3_8 0x0 856 /* SOFTWARE_CONTROLLED_POWERDOWN */ 857 MX53_PAD_EIM_DA9__GPIO3_9 0x0 858 /* DC_PWR_IN_OK */ 859 MX53_PAD_EIM_DA10__GPIO3_10 0x0 860 /* BATT_PRESENT_N */ 861 MX53_PAD_EIM_DA11__GPIO3_11 0xe4 862 /* PMIC_IRQ_N */ 863 MX53_PAD_EIM_DA12__GPIO3_12 0x0 864 /* PMIC_VDD_FAULT_STATUS_N */ 865 MX53_PAD_EIM_DA13__GPIO3_13 0x0 866 /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */ 867 MX53_PAD_EIM_DA14__GPIO3_14 0x0 868 /* NOT USED - AVAILABLE 3.3V GPIO */ 869 MX53_PAD_EIM_DA15__GPIO3_15 0x0 870 /* NOT USED - AVAILABLE 3.3V GPIO */ 871 MX53_PAD_EIM_D22__GPIO3_22 0x0 872 /* NOT USED - AVAILABLE 3.3V GPIO */ 873 MX53_PAD_EIM_D24__GPIO3_24 0x0 874 /* NBP_PUMP_VALVE_PWR_ENABLE */ 875 MX53_PAD_EIM_D25__GPIO3_25 0x0 876 /* NIBP_RESET_N */ 877 MX53_PAD_EIM_D26__GPIO3_26 0x0 878 /* LATCHED_OVERPRESSURE_N */ 879 MX53_PAD_EIM_D27__GPIO3_27 0x0 880 /* NBP_SBWTCLK */ 881 MX53_PAD_EIM_D29__GPIO3_29 0x0 882 /* ENABLE_WIFI_MODULE */ 883 MX53_PAD_GPIO_11__GPIO4_1 0x400 884 /* WIFI_MODULE_IRQ_N */ 885 MX53_PAD_GPIO_12__GPIO4_2 0x400 886 /* ENABLE_BLUETOOTH_MODULE */ 887 MX53_PAD_GPIO_13__GPIO4_3 0x400 888 /* RESET_IMX535_USB_HOST2_PHY_N */ 889 MX53_PAD_GPIO_14__GPIO4_4 0x400 890 /* ONKEY_IS_DEPRESSED */ 891 MX53_PAD_KEY_ROW3__GPIO4_13 0x0 892 /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */ 893 MX53_PAD_EIM_WAIT__GPIO5_0 0x0 894 /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */ 895 MX53_PAD_EIM_A25__GPIO5_2 0x0 896 /* I2C_PCAP_TOUCHSCREEN_IRQ_N */ 897 MX53_PAD_EIM_A24__GPIO5_4 0x0 898 /* NOT USED - AVAILABLE 1.8V GPIO */ 899 MX53_PAD_DISP0_DAT13__GPIO5_7 0x400 900 /* NOT USED - AVAILABLE 1.8V GPIO */ 901 MX53_PAD_DISP0_DAT14__GPIO5_8 0x400 902 /* NOT USED - AVAILABLE 1.8V GPIO */ 903 MX53_PAD_DISP0_DAT15__GPIO5_9 0x400 904 /* HOST_CONTROLLED_RESET_TO_LCD_N */ 905 MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0 906 /* HOST_CONTROLLED_RESET_TO_PCAP_N */ 907 MX53_PAD_CSI0_MCLK__GPIO5_19 0x0 908 /* LR_SCAN_CTRL */ 909 MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0 910 /* UD_SCAN_CTRL */ 911 MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0 912 /* DATA_WIDTH_CTRL */ 913 MX53_PAD_CSI0_DAT10__GPIO5_28 0x0 914 /* BACKLIGHT_ENABLE */ 915 MX53_PAD_CSI0_DAT11__GPIO5_29 0x0 916 /* MED_USB_PORT_1_HOST_SELECT */ 917 MX53_PAD_EIM_A23__GPIO6_6 0x0 918 /* MED_USB_PORT_2_HOST_SELECT */ 919 MX53_PAD_NANDF_CLE__GPIO6_7 0x0 920 /* MED_USB_PORT_3_HOST_SELECT */ 921 MX53_PAD_NANDF_ALE__GPIO6_8 0x0 922 /* MED_USB_PORT_4_HOST_SELECT */ 923 MX53_PAD_NANDF_WP_B__GPIO6_9 0x0 924 /* MED_USB_PORT_5_HOST_SELECT */ 925 MX53_PAD_NANDF_RB0__GPIO6_10 0x0 926 /* MED_USB_PORT_6_HOST_SELECT */ 927 MX53_PAD_NANDF_CS0__GPIO6_11 0x0 928 /* MED_USB_PORT_7_HOST_SELECT */ 929 MX53_PAD_NANDF_WE_B__GPIO6_12 0x0 930 /* MED_USB_PORT_8_HOST_SELECT */ 931 MX53_PAD_NANDF_RE_B__GPIO6_13 0x0 932 /* MED_USB_PORT_TO_IMX_SELECT_0 */ 933 MX53_PAD_NANDF_CS1__GPIO6_14 0x0 934 /* MED_USB_PORT_TO_IMX_SELECT_1 */ 935 MX53_PAD_NANDF_CS2__GPIO6_15 0x0 936 /* MED_USB_PORT_TO_IMX_SELECT_2 */ 937 MX53_PAD_NANDF_CS3__GPIO6_16 0x0 938 /* POWER_AND_BOOT_STATUS_INDICATOR */ 939 MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 940 /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ 941 MX53_PAD_GPIO_16__GPIO7_11 0x0 942 /* BATTERY_STATUS_INDICATOR_AMBER */ 943 MX53_PAD_GPIO_17__GPIO7_12 0x0 944 >; 945 }; 946 947 pinctrl_i2c1: i2c1grp { 948 fsl,pins = < 949 MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 950 MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 951 >; 952 }; 953 954 pinctrl_i2c1_gpio: i2c1gpiogrp { 955 fsl,pins = < 956 MX53_PAD_EIM_D28__GPIO3_28 0x1e4 957 MX53_PAD_EIM_D21__GPIO3_21 0x1e4 958 >; 959 }; 960 961 pinctrl_i2c2: i2c2grp { 962 fsl,pins = < 963 MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4 964 MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4 965 >; 966 }; 967 968 pinctrl_i2c2_gpio: i2c2gpiogrp { 969 fsl,pins = < 970 MX53_PAD_EIM_D16__GPIO3_16 0x1e4 971 MX53_PAD_EIM_EB2__GPIO2_30 0x1e4 972 >; 973 }; 974 975 pinctrl_i2c3: i2c3grp { 976 fsl,pins = < 977 MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4 978 MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4 979 >; 980 }; 981 982 pinctrl_i2c3_gpio: i2c3gpiogrp { 983 fsl,pins = < 984 MX53_PAD_EIM_D18__GPIO3_18 0x1e4 985 MX53_PAD_EIM_D17__GPIO3_17 0x1e4 986 >; 987 }; 988 989 pinctrl_pwm1: pwm1grp { 990 fsl,pins = < 991 MX53_PAD_GPIO_9__PWM1_PWMO 0x5 992 >; 993 }; 994 995 pinctrl_pwm2: pwm2grp { 996 fsl,pins = < 997 MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5 998 >; 999 }; 1000 1001 pinctrl_uart1: uart1grp { 1002 fsl,pins = < 1003 MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 1004 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 1005 >; 1006 }; 1007 1008 pinctrl_uart2: uart2grp { 1009 fsl,pins = < 1010 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 1011 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 1012 >; 1013 }; 1014 1015 pinctrl_uart3: uart3grp { 1016 fsl,pins = < 1017 MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 1018 MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 1019 MX53_PAD_EIM_D23__UART3_CTS 0x1e4 1020 MX53_PAD_EIM_EB3__UART3_RTS 0x1e4 1021 >; 1022 }; 1023 1024 pinctrl_uart4: uart4grp { 1025 fsl,pins = < 1026 MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 1027 MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 1028 >; 1029 }; 1030 1031 pinctrl_uart5: uart5grp { 1032 fsl,pins = < 1033 MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 1034 MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 1035 >; 1036 }; 1037 1038 pinctrl_usb_otg_vbus: usb-otg-vbusgrp { 1039 fsl,pins = < 1040 /* USB_HS_OTG_VBUS_ENABLE */ 1041 MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4 1042 >; 1043 }; 1044 1045 pinctrl_usbh2: usbh2grp { 1046 fsl,pins = < 1047 /* USB H2 */ 1048 MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180 1049 MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180 1050 MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180 1051 MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180 1052 MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180 1053 MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180 1054 MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180 1055 MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180 1056 MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180 1057 MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180 1058 MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180 1059 MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5 1060 MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180 1061 >; 1062 }; 1063 1064 pinctrl_usbh2_vbus: usbh2-vbusgrp { 1065 fsl,pins = < 1066 /* USB_HS_HOST2_VBUS_ENABLE */ 1067 MX53_PAD_EIM_D31__GPIO3_31 0x0 1068 >; 1069 }; 1070 1071 pinctrl_usbh3_vbus: usbh3-vbusgrp { 1072 fsl,pins = < 1073 /* USB_HS_HOST3_VBUS_ENABLE */ 1074 MX53_PAD_CSI0_DAT9__GPIO5_27 0x0 1075 >; 1076 }; 1077 1078 pinctrl_usbh3: usbh3grp { 1079 fsl,pins = < 1080 /* USB H3 */ 1081 MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180 1082 MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180 1083 MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180 1084 MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180 1085 MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180 1086 MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180 1087 MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180 1088 MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180 1089 MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5 1090 MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180 1091 MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180 1092 MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180 1093 MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180 1094 >; 1095 }; 1096 1097 pinctrl_usb_otg: usbotggrp { 1098 fsl,pins = < 1099 /* USB_OTG_FAULT_N */ 1100 MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 1101 >; 1102 }; 1103 1104 pinctrl_alarmled_pins: qmx6alarmledgrp { 1105 fsl,pins = < 1106 /* ACTIVATE_ALARM_LIGHT_RED */ 1107 MX53_PAD_PATA_DIOR__GPIO7_3 0x0 1108 /* ACTIVATE_ALARM_LIGHT_YELLOW */ 1109 MX53_PAD_PATA_DA_1__GPIO7_7 0x0 1110 /* ACTIVATE_ALARM_LIGHT_CYAN */ 1111 MX53_PAD_PATA_DA_2__GPIO7_8 0x0 1112 /* AUDIO_ALARMS_SILENCED_INDICATOR */ 1113 MX53_PAD_GPIO_18__GPIO7_13 0x0 1114 >; 1115 }; 1116}; 1117